diff options
| author | orel <orel@dagoma.fr> | 2020-06-10 12:43:44 +0300 |
|---|---|---|
| committer | orel <orel@dagoma.fr> | 2020-06-10 12:43:44 +0300 |
| commit | 36f70e43c2a1c4f81877dae888f07c06d55d81b6 (patch) | |
| tree | 7f2d9b6f0783c698724df851a717bf3df5fed01b /resources/definitions/dagoma_discoeasy200_bicolor.def.json | |
| parent | 7c6104b81296f57121f6bc607f9aea72cf77036d (diff) | |
Extruders gcodes sequences were inverted...
Diffstat (limited to 'resources/definitions/dagoma_discoeasy200_bicolor.def.json')
| -rw-r--r-- | resources/definitions/dagoma_discoeasy200_bicolor.def.json | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/resources/definitions/dagoma_discoeasy200_bicolor.def.json b/resources/definitions/dagoma_discoeasy200_bicolor.def.json index 75910d6a4a..4786c03fc2 100644 --- a/resources/definitions/dagoma_discoeasy200_bicolor.def.json +++ b/resources/definitions/dagoma_discoeasy200_bicolor.def.json @@ -29,7 +29,7 @@ "default_value": true }, "machine_start_gcode": { - "default_value": ";Begin Start Gcode for Dagoma DiscoEasy 200 Bicolor\n;Sliced: {date} {time}\n;Initial extruder: {initial_extruder_nr}\n\nG90 ;Absolute positioning\nM106 S255 ;Fan on full\nG28 X Y ;Home stop X Y\nG1 X100 ;Centre back during cooldown in case of oozing\nM109 R{material_standby_temperature} ;Cooldown in case too hot\nG28 ;Centre\nG29 ;Auto-level\nM104 S{material_print_temperature_layer_0} ;Pre-heat\nM107 ;Fan off\nG0 X100 Y5 Z0.5 ;Front centre for degunk\nM109 S{material_print_temperature_layer_0} ;Wait for initial temp\nM83 ;E Relative\nG1 E60 F3000 ;Reverse multi-extruder retract\nG1 E10 F200 ;Degunk\nG1 E-3 F5000 ;Retract\nG0 Z3 ;Withdraw\nM82 ;E absolute\nG92 E0 ;E reset\nG1 F6000 ;Set feedrate\n\n;Finish Start Gcode for Dagoma DiscoEasy 200 Bicolor\n" + "default_value": ";Begin Start Gcode for Dagoma DiscoEasy 200 Bicolor\n;Sliced: {date} {time}\n;Initial extruder: {initial_extruder_nr}\n\nG90 ;Absolute positioning\nM106 S255 ;Fan on full\nG28 X Y ;Home stop X Y\nG1 X100 ;Centre back during cooldown in case of oozing\nM109 R{material_standby_temperature} ;Cooldown in case too hot\nG28 ;Centre\nG29 ;Auto-level\nM104 S{material_print_temperature_layer_0} ;Pre-heat\nM107 ;Fan off\nG0 X100 Y5 Z0.5 ;Front centre for degunk\nM109 S{material_print_temperature_layer_0} ;Wait for initial temp\n;M83 ;E Relative\n;G1 E60 F3000 ;Reverse multi-extruder retract\n;G1 E10 F200 ;Degunk\n;G1 E-3 F5000 ;Retract\nG0 Z3 ;Withdraw\n;M82 ;E absolute\n;G92 E0 ;E reset\n;G1 F6000 ;Set feedrate\n\n;Finish Start Gcode for Dagoma DiscoEasy 200 Bicolor\n" }, "machine_end_gcode": { "default_value": ";Begin End Gcode for Dagoma DiscoEasy 200 Bicolor\n\nM106 S255 ;Fan on full\nM104 S0 ;Cool hotend\nM140 S0 ;Cool heated bed\nG91 ;Relative positioning\nG1 E-3 F5000 ;Retract filament to stop oozing\nG1 E-60 F5000 ;Retract filament multi-extruder\nG0 Z+3 ;Withdraw\nG90 ; Absolute positioning\nG28 X Y ;Home\nM109 R{material_standby_temperature} ;Wait until head has cooled to standby temp\nM107 ;Fan off\nM18 ;Stepper motors off\n\n;Finish End Gcode for Dagoma DiscoEasy 200 Bicolor\n" |