diff options
author | nani <venkat.kamesh90@gmail.com> | 2020-07-13 22:12:02 +0300 |
---|---|---|
committer | nani <venkat.kamesh90@gmail.com> | 2020-07-13 22:12:02 +0300 |
commit | 2ddaf5d7ca857b1d2152a875ca5482d5d8477a70 (patch) | |
tree | bf8481124623f741b12888b3a5e60a38308d63b1 /resources/definitions/diy220.def.json | |
parent | adc78e302400357b56b2c27a2908c366df858f94 (diff) |
Revert "Added Definitions for all SVT FDM printers"
This reverts commit adc78e302400357b56b2c27a2908c366df858f94.
Diffstat (limited to 'resources/definitions/diy220.def.json')
-rw-r--r-- | resources/definitions/diy220.def.json | 89 |
1 files changed, 0 insertions, 89 deletions
diff --git a/resources/definitions/diy220.def.json b/resources/definitions/diy220.def.json deleted file mode 100644 index 5527289f2e..0000000000 --- a/resources/definitions/diy220.def.json +++ /dev/null @@ -1,89 +0,0 @@ -{ - "version": 2, - "name": "Diytech 220", - "inherits": "fdmprinter", - "metadata": { - "visible": true, - "author": "Venkatkamesh", - "manufacturer": "Sri Vignan Technologies", - "weight": 3, - "file_formats": "text/x-gcode", - "platform": "ultimaker3_platform.obj", - "platform_texture": "svtbacktext.png", - "platform_offset": [0, 0, 0], - "has_materials": true, - "has_variants": true, - "preferred_variant_name": "0.4 mm", - "machine_extruder_trains": - { - "0": "diy220_extruder_0" - } - }, - "overrides": { - "machine_name": { "default_value": "Diytech 220" }, - "machine_start_gcode" : { - "value": "\"\" if machine_gcode_flavor == \"UltiGCode\" else \"G21 ;metric values\\nG90 ;absolute positioning\\nM82 ;set extruder to absolute mode\\nM107 ;start with the fan off\\nG28 Z0 ;move Z to bottom endstops\\nG28 X0 Y0 ;move X/Y to endstops\\nG1 X15 Y0 F4000 ;move X/Y to front of printer\\nG1 Z15.0 F9000 ;move the platform to 15mm\\nG92 E0 ;zero the extruded length\\nG1 F200 E50 ;extrude 10 mm of feed stock\\nG92 E0 ;zero the extruded length again\\nG1 F9000\\n;Put printing message on LCD screen\\nM117 Printing...\"" - }, - "machine_end_gcode" : { - "value": "\";Version _2.6 of the firmware can abort the print too early if the file ends\\n;too soon. However if the file hasn't ended yet because there are comments at\\n;the end of the file, it won't abort yet. Therefore we have to put at least 512\\n;bytes at the end of the g-code so that the file is not yet finished by the\\n;time that the motion planner gets flushed. With firmware version _3.3 this\\n;should be fixed, so this comment wouldn't be necessary any more. Now we have\\n;to pad this text to make precisely 512 bytes.\" if machine_gcode_flavor == \"UltiGCode\" else \"M104 S0 ;extruder heater off\\nM140 S0 ;heated bed heater off (if you have it)\\nG91 ;relative positioning\\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\\nM84 ;steppers off\\nG90 ;absolute positioning\\n;Version _2.6 of the firmware can abort the print too early if the file ends\\n;too soon. However if the file hasn't ended yet because there are comments at\\n;the end of the file, it won't abort yet. Therefore we have to put at least 512\\n;bytes at the end of the g-code so that the file is not yet finished by the\\n;time that the motion planner gets flushed. With firmware version _3.3 this\\n;should be fixed, so this comment wouldn't be necessary any more. Now we have\\n;to pad this text to make precisely 512 bytes.\"" - }, - "machine_width": { - "default_value": 220 - }, - "machine_depth": { - "default_value": 220 - }, - "machine_height": { - "default_value": 305 - }, - "machine_heated_bed": { - "default_value": true - }, - "machine_head_with_fans_polygon": - { - "default_value": [ - [ -42, 12 ], - [ -42, -32 ], - [ 62, 12 ], - [ 62, -32 ] - ] - }, - "machine_center_is_zero": { - "default_value": false - }, - "gantry_height": { - "value": "48" - }, - "machine_use_extruder_offset_to_offset_coords": { - "default_value": true - }, - "machine_gcode_flavor": { - "default_value": "Marlin" - }, - "machine_disallowed_areas": { - "default_value": [ - [[-115, 112.5], [ -82, 112.5], [ -84, 102.5], [-115, 102.5]], - [[ 115, 112.5], [ 115, 102.5], [ 110, 102.5], [ 108, 112.5]], - [[-115, -112.5], [-115, -104.5], [ -84, -104.5], [ -82, -112.5]], - [[ 115, -112.5], [ 108, -112.5], [ 110, -104.5], [ 115, -104.5]] - ]}, - "machine_nozzle_tip_outer_diameter": { - "default_value": 1 - }, - "machine_nozzle_head_distance": { - "default_value": 3 - }, - "machine_max_feedrate_x": { - "default_value": 300 - }, - "machine_max_feedrate_y": { - "default_value": 300 - }, - "machine_max_feedrate_z": { - "default_value": 40 - }, - "machine_acceleration": { - "default_value": 3000 - } - } -} |