diff options
author | nani <venkat.kamesh90@gmail.com> | 2020-07-13 21:26:23 +0300 |
---|---|---|
committer | nani <venkat.kamesh90@gmail.com> | 2020-07-13 21:26:23 +0300 |
commit | adc78e302400357b56b2c27a2908c366df858f94 (patch) | |
tree | 92439e15c8abab0dd28327ae07197985da4fa3e3 /resources/definitions/diy220.def.json | |
parent | bbcd37e5bcfe04422c97f4046faf31fa8d1dc799 (diff) |
Added Definitions for all SVT FDM printers
New brand
Diffstat (limited to 'resources/definitions/diy220.def.json')
-rw-r--r-- | resources/definitions/diy220.def.json | 89 |
1 files changed, 89 insertions, 0 deletions
diff --git a/resources/definitions/diy220.def.json b/resources/definitions/diy220.def.json new file mode 100644 index 0000000000..5527289f2e --- /dev/null +++ b/resources/definitions/diy220.def.json @@ -0,0 +1,89 @@ +{ + "version": 2, + "name": "Diytech 220", + "inherits": "fdmprinter", + "metadata": { + "visible": true, + "author": "Venkatkamesh", + "manufacturer": "Sri Vignan Technologies", + "weight": 3, + "file_formats": "text/x-gcode", + "platform": "ultimaker3_platform.obj", + "platform_texture": "svtbacktext.png", + "platform_offset": [0, 0, 0], + "has_materials": true, + "has_variants": true, + "preferred_variant_name": "0.4 mm", + "machine_extruder_trains": + { + "0": "diy220_extruder_0" + } + }, + "overrides": { + "machine_name": { "default_value": "Diytech 220" }, + "machine_start_gcode" : { + "value": "\"\" if machine_gcode_flavor == \"UltiGCode\" else \"G21 ;metric values\\nG90 ;absolute positioning\\nM82 ;set extruder to absolute mode\\nM107 ;start with the fan off\\nG28 Z0 ;move Z to bottom endstops\\nG28 X0 Y0 ;move X/Y to endstops\\nG1 X15 Y0 F4000 ;move X/Y to front of printer\\nG1 Z15.0 F9000 ;move the platform to 15mm\\nG92 E0 ;zero the extruded length\\nG1 F200 E50 ;extrude 10 mm of feed stock\\nG92 E0 ;zero the extruded length again\\nG1 F9000\\n;Put printing message on LCD screen\\nM117 Printing...\"" + }, + "machine_end_gcode" : { + "value": "\";Version _2.6 of the firmware can abort the print too early if the file ends\\n;too soon. However if the file hasn't ended yet because there are comments at\\n;the end of the file, it won't abort yet. Therefore we have to put at least 512\\n;bytes at the end of the g-code so that the file is not yet finished by the\\n;time that the motion planner gets flushed. With firmware version _3.3 this\\n;should be fixed, so this comment wouldn't be necessary any more. Now we have\\n;to pad this text to make precisely 512 bytes.\" if machine_gcode_flavor == \"UltiGCode\" else \"M104 S0 ;extruder heater off\\nM140 S0 ;heated bed heater off (if you have it)\\nG91 ;relative positioning\\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\\nM84 ;steppers off\\nG90 ;absolute positioning\\n;Version _2.6 of the firmware can abort the print too early if the file ends\\n;too soon. However if the file hasn't ended yet because there are comments at\\n;the end of the file, it won't abort yet. Therefore we have to put at least 512\\n;bytes at the end of the g-code so that the file is not yet finished by the\\n;time that the motion planner gets flushed. With firmware version _3.3 this\\n;should be fixed, so this comment wouldn't be necessary any more. Now we have\\n;to pad this text to make precisely 512 bytes.\"" + }, + "machine_width": { + "default_value": 220 + }, + "machine_depth": { + "default_value": 220 + }, + "machine_height": { + "default_value": 305 + }, + "machine_heated_bed": { + "default_value": true + }, + "machine_head_with_fans_polygon": + { + "default_value": [ + [ -42, 12 ], + [ -42, -32 ], + [ 62, 12 ], + [ 62, -32 ] + ] + }, + "machine_center_is_zero": { + "default_value": false + }, + "gantry_height": { + "value": "48" + }, + "machine_use_extruder_offset_to_offset_coords": { + "default_value": true + }, + "machine_gcode_flavor": { + "default_value": "Marlin" + }, + "machine_disallowed_areas": { + "default_value": [ + [[-115, 112.5], [ -82, 112.5], [ -84, 102.5], [-115, 102.5]], + [[ 115, 112.5], [ 115, 102.5], [ 110, 102.5], [ 108, 112.5]], + [[-115, -112.5], [-115, -104.5], [ -84, -104.5], [ -82, -112.5]], + [[ 115, -112.5], [ 108, -112.5], [ 110, -104.5], [ 115, -104.5]] + ]}, + "machine_nozzle_tip_outer_diameter": { + "default_value": 1 + }, + "machine_nozzle_head_distance": { + "default_value": 3 + }, + "machine_max_feedrate_x": { + "default_value": 300 + }, + "machine_max_feedrate_y": { + "default_value": 300 + }, + "machine_max_feedrate_z": { + "default_value": 40 + }, + "machine_acceleration": { + "default_value": 3000 + } + } +} |