diff options
author | venkatkamesh <venkat.kamesh90@gmail.com> | 2020-11-23 16:46:53 +0300 |
---|---|---|
committer | venkatkamesh <venkat.kamesh90@gmail.com> | 2020-11-23 16:46:53 +0300 |
commit | e9e5b70023ccec1d062f21c35d62476aae824145 (patch) | |
tree | 864395a6c455912ab0afe0391ec8b314c1bc4327 /resources/definitions/diy220.def.json | |
parent | f8f6809a3ee6de7683da851a0ffc82ef6f59a41c (diff) | |
parent | b49518f2436f7bd9c0bc83708381814e21a9beba (diff) |
Merge branch 'master' of https://github.com/venkatkamesh/Cura
Diffstat (limited to 'resources/definitions/diy220.def.json')
-rw-r--r-- | resources/definitions/diy220.def.json | 29 |
1 files changed, 8 insertions, 21 deletions
diff --git a/resources/definitions/diy220.def.json b/resources/definitions/diy220.def.json index 2acfa03b6f..28c222a7b8 100644 --- a/resources/definitions/diy220.def.json +++ b/resources/definitions/diy220.def.json @@ -21,12 +21,13 @@ }, "overrides": { "machine_name": { "default_value": "Diytech 220" }, - "machine_start_gcode" : { - "value": "\"\" if machine_gcode_flavor == \"UltiGCode\" else \"G21 ;metric values\\nG90 ;absolute positioning\\nM82 ;set extruder to absolute mode\\nM107 ;start with the fan off\\nG28 Z0 ;move Z to bottom endstops\\nG28 X0 Y0 ;move X/Y to endstops\\nG1 X15 Y0 F4000 ;move X/Y to front of printer\\nG1 Z15.0 F9000 ;move the platform to 15mm\\nG92 E0 ;zero the extruded length\\nG1 F200 E50 ;extrude 10 mm of feed stock\\nG92 E0 ;zero the extruded length again\\nG1 F9000\\n;Put printing message on LCD screen\\nM117 Printing...\"" - }, - "machine_end_gcode" : { - "value": "\";Version _2.6 of the firmware can abort the print too early if the file ends\\n;too soon. However if the file hasn't ended yet because there are comments at\\n;the end of the file, it won't abort yet. Therefore we have to put at least 512\\n;bytes at the end of the g-code so that the file is not yet finished by the\\n;time that the motion planner gets flushed. With firmware version _3.3 this\\n;should be fixed, so this comment wouldn't be necessary any more. Now we have\\n;to pad this text to make precisely 512 bytes.\" if machine_gcode_flavor == \"UltiGCode\" else \"M104 S0 ;extruder heater off\\nM140 S0 ;heated bed heater off (if you have it)\\nG91 ;relative positioning\\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\\nM84 ;steppers off\\nG90 ;absolute positioning\\n;Version _2.6 of the firmware can abort the print too early if the file ends\\n;too soon. However if the file hasn't ended yet because there are comments at\\n;the end of the file, it won't abort yet. Therefore we have to put at least 512\\n;bytes at the end of the g-code so that the file is not yet finished by the\\n;time that the motion planner gets flushed. With firmware version _3.3 this\\n;should be fixed, so this comment wouldn't be necessary any more. Now we have\\n;to pad this text to make precisely 512 bytes.\"" + "machine_start_gcode": { + "default_value": "G21\nG90\nM82\nM107\nG28\nG1 Z15 F200\nT0\nG92 E0\nG1 E16 F250\nG92 E0\n" }, + "machine_end_gcode": { + "default_value": "G91\nG1 Z+0.5 E-16 Y+10 F9000\nG90\nM107\nM104 S0 T0\nM140 S0\nM117\nG28 X0 Y0\nM84" + }, + "machine_width": { "default_value": 220 }, @@ -39,15 +40,7 @@ "machine_heated_bed": { "default_value": true }, - "machine_head_with_fans_polygon": - { - "default_value": [ - [ -42, 12 ], - [ -42, -32 ], - [ 62, 12 ], - [ 62, -32 ] - ] - }, + "machine_center_is_zero": { "default_value": false }, @@ -60,13 +53,7 @@ "machine_gcode_flavor": { "default_value": "Marlin" }, - "machine_disallowed_areas": { - "default_value": [ - [[-115, 112.5], [ -82, 112.5], [ -84, 102.5], [-115, 102.5]], - [[ 115, 112.5], [ 115, 102.5], [ 110, 102.5], [ 108, 112.5]], - [[-115, -112.5], [-115, -104.5], [ -84, -104.5], [ -82, -112.5]], - [[ 115, -112.5], [ 108, -112.5], [ 110, -104.5], [ 115, -104.5]] - ]}, + "machine_nozzle_tip_outer_diameter": { "default_value": 1 }, |