diff options
author | Eryone <40707672+Eryone@users.noreply.github.com> | 2021-03-30 14:34:14 +0300 |
---|---|---|
committer | GitHub <noreply@github.com> | 2021-03-30 14:34:14 +0300 |
commit | 9bdf1396340061dd7dae07a2773c814981ac1a48 (patch) | |
tree | a6d3982699a37ed9f9aaeddd0c4714c07a10a2c6 /resources/definitions/eryone_thinker.def.json | |
parent | 8d194d79b55938d6c59f82d83d71df2ce8951c02 (diff) |
Improve End GCode of eryone_thinker (#9466)
Ensure we disable bed temp and turn off all fans.
Move the nozzle up by 0.5mm and retract to remove wipe on model top layer.
Co-authored-by: Demetrius Apostolopoulos <75643490+dapostol73@users.noreply.github.com>
Diffstat (limited to 'resources/definitions/eryone_thinker.def.json')
-rw-r--r-- | resources/definitions/eryone_thinker.def.json | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/resources/definitions/eryone_thinker.def.json b/resources/definitions/eryone_thinker.def.json index f3c763ca39..6534b8c471 100644 --- a/resources/definitions/eryone_thinker.def.json +++ b/resources/definitions/eryone_thinker.def.json @@ -60,7 +60,7 @@ "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z10.0 F600 ;move the platform down 10mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 Y-3 F1200 ;move to prime\nG1 X10 F1200 ;\nG1 Z0.1 F600 ;get ready to prime\nG1 X120 E15 F1200 ;prime nozzle \nG1 X120 F3600 ;quick wipe\nG92 E0 ;zero the extruded length\nG5 ;enable resume from power failure\nM117 Printing..." }, "machine_end_gcode": { - "default_value": "M104 S0\nM140 S0 ;Retract the filament\nG92 E1\nG1 E-5 F300\nG90 ;absolute positioning\nG1 X0 Y250 F4800 ; position for easy part removal\nM84 ;steppers off" + "default_value": "M104 S0 ;turn off extruder\nM140 S0 ;turn off bed\nM107 ;turn off all fans\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 E-5 F300\nG1 Z+0.5 E-5 ;move Z up a bit and retract filament even more\nG90 ;absolute positioning\nG1 X0 Y250 F4800 ; position for easy part removal\nM84 ;steppers off" }, "acceleration_enabled": { "value": true |