diff options
author | krios-fabteam <km@fabtotum.com> | 2018-01-29 18:41:21 +0300 |
---|---|---|
committer | krios-fabteam <km@fabtotum.com> | 2018-01-29 18:41:21 +0300 |
commit | abe9c204a9e97b753fa4812f7e49f165c3b21913 (patch) | |
tree | 45a0d1bd12c9d8f8d80a2584a8f9f98c7f36bec5 /resources/definitions/fabtotum.def.json | |
parent | fc23787c1c6c92bbac34ddd41891285113eea43f (diff) |
added tpu qualities
default fan value for abs set to false
changed M728 with M300 in start and end gcode
Diffstat (limited to 'resources/definitions/fabtotum.def.json')
-rw-r--r-- | resources/definitions/fabtotum.def.json | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/resources/definitions/fabtotum.def.json b/resources/definitions/fabtotum.def.json index 87ce11a35c..751db3d80c 100644 --- a/resources/definitions/fabtotum.def.json +++ b/resources/definitions/fabtotum.def.json @@ -21,10 +21,10 @@ "overrides": { "machine_name": { "default_value": "FABtotum Personal Fabricator" }, "machine_start_gcode": { - "default_value": ";Layer height: {layer_height}\n;Walls: {wall_thickness}\n;Fill: {infill_sparse_density}\n;Top\\Bottom Thickness: {top_bottom_thickness}\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nG4 S1 ;1 millisecond pause to buffer the bep bep \nM728 ;FAB bep bep (start the print, go check the oozing and skirt lines adesion) \nG4 S1 ;1 second pause to reach the printer (run fast)\nG92 E0 ;zero the extruded length \nG1 F200 E35 ;slowly extrude 35mm of filament to clean the nozzle and build up extrusion pressure \nG92 E0 ;zero the extruded length again \nG1 F{speed_travel} ;Set travel speed \n;print" + "default_value": ";Layer height: {layer_height}\n;Walls: {wall_thickness}\n;Fill: {infill_sparse_density}\n;Top\\Bottom Thickness: {top_bottom_thickness}\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nG4 S1 ;1 millisecond pause to buffer the bep bep \nM300 ;FAB bep bep (start the print, go check the oozing and skirt lines adesion) \nG4 S1 ;1 second pause to reach the printer (run fast)\nG92 E0 ;zero the extruded length \nG1 F200 E35 ;slowly extrude 35mm of filament to clean the nozzle and build up extrusion pressure \nG92 E0 ;zero the extruded length again \nG1 F{speed_travel} ;Set travel speed \n;print" }, "machine_end_gcode": { - "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-3 X+5 Y+5 F5000 ;move Z up a bit and retract filament even more\n;end of the print\nM84 ;steppers off\nG90 ;absolute positioning\nM728 ;FAB bep bep (end print)" + "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-3 X+5 Y+5 F5000 ;move Z up a bit and retract filament even more\n;end of the print\nM84 ;steppers off\nG90 ;absolute positioning\nM300 ;FAB bep bep (end print)" }, "gantry_height": { "default_value": 55 }, "machine_width": { "default_value": 214 }, |