diff options
author | Diego Prado Gesto <d.pradogesto@ultimaker.com> | 2019-02-24 21:01:13 +0300 |
---|---|---|
committer | Diego Prado Gesto <d.pradogesto@ultimaker.com> | 2019-02-24 21:01:13 +0300 |
commit | 33a713ad928a5ecb59904ac0a8312472e750ee62 (patch) | |
tree | ed382c2f453fab9eff6dfe0ffc93ce5a28af2654 /resources/definitions/felixtec4dual.def.json | |
parent | 4270cb065e46438acb02eb6bf45772e92b954606 (diff) |
Fix indentation and remove spaces
Diffstat (limited to 'resources/definitions/felixtec4dual.def.json')
-rw-r--r-- | resources/definitions/felixtec4dual.def.json | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/resources/definitions/felixtec4dual.def.json b/resources/definitions/felixtec4dual.def.json index 9c27f2c03d..ba5bcfa112 100644 --- a/resources/definitions/felixtec4dual.def.json +++ b/resources/definitions/felixtec4dual.def.json @@ -47,11 +47,11 @@ "adhesion_type": { "default_value": "skirt" }, "skirt_brim_minimal_length": { "default_value": 130}, - "machine_start_gcode": { + "machine_start_gcode": { "default_value": "; FELIXprinters | www.FELIXprinters.com | Zeemanlaan 15 3401 MV IJsselstein The Netherlands\n; FELIX Tec 4 | Start Code Dual Extruders v1.0\n; Modified by kerog777@gmail.com\n;================================ \n;Initializing\nM80 ; Turn on the power supply\nM107 ; Turn off fans\nM117 Heating up\nM190 S{material_bed_temperature} ; Heatup Bed\nM104 T0 S120\nM104 T1 S120\nG28 ; Home all\nM109 T0 S{material_print_temperature_layer_0} ; Heatup hot-end\nM117 Purging\nT0 ; Select extruder 1\nG92 E0 ; Reset extruder\nG1 X10.0 Y1.1 Z5.0 F15240 ; Move to start-line position\nG1 Z0.3 F15240 ; Move z up\nG1 X127.0 Y1.1 Z0.3 F1500.0 E15 ; Purge 1st line\nG92 E0 ; Reset extruder\n\n;================================ ; Initializing done\nM117 FELIXprinting" }, "machine_end_gcode": { - "default_value": "; FELIXprinters End Code Tec Series v1.0\n; Modified by kerog777@gmail.com\n; ================================= \n; Move extruder to park position\nG91 ; Make coordinates relative\nG1 Z2 F1000 ; Move z 2mm up\nG90 ; Use absolute coordinates again\n G1 X0 Y0 F15240 ; Move bed and printhead to ergonomic position\n\n; ================================= ; Turn off heaters\nM140 S0 ; Turn off bed heater\nT0 ; Select left extruder\nM104 T0 S0 ; Turn off heater and continue\n G92 E0 ; Reset extruder position\nG1 E-6 ; Retract filament 8mm\nG92 E0 ; Reset extruder position\nT1 ; Select right extruder\nM104 T1 S0 ; Turn off heater and continue\nG92 E0 ; Reset extruder position\nG1 E-6 ; Retract filament 8mm\nG92 E0 ; Reset extruder position\nT0 ; Select left extruder\n\n; ================================= ; Turn the rest off\nM107 ; Turn off fan\nM84 ; Disable steppers\nM117 Finished Printing!" + "default_value": "; FELIXprinters End Code Tec Series v1.0\n; Modified by kerog777@gmail.com\n; ================================= \n; Move extruder to park position\nG91 ; Make coordinates relative\nG1 Z2 F1000 ; Move z 2mm up\nG90 ; Use absolute coordinates again\nG1 X0 Y0 F15240 ; Move bed and printhead to ergonomic position\n\n; ================================= ; Turn off heaters\nM140 S0 ; Turn off bed heater\nT0 ; Select left extruder\nM104 T0 S0 ; Turn off heater and continue\nG92 E0 ; Reset extruder position\nG1 E-6 ; Retract filament 8mm\nG92 E0 ; Reset extruder position\nT1 ; Select right extruder\nM104 T1 S0 ; Turn off heater and continue\nG92 E0 ; Reset extruder position\nG1 E-6 ; Retract filament 8mm\nG92 E0 ; Reset extruder position\nT0 ; Select left extruder\n\n; ================================= ; Turn the rest off\nM107 ; Turn off fan\nM84 ; Disable steppers\nM117 Finished Printing!" } } } |