diff options
author | kerog777 <kerog777@gmail.com> | 2018-04-24 07:06:52 +0300 |
---|---|---|
committer | kerog777 <kerog777@gmail.com> | 2018-04-24 07:06:52 +0300 |
commit | 930b716cc241a97e3ca42d379d9153c69f057335 (patch) | |
tree | be1a4bf1e3e4cad7bcf23f214be7b7b65c93ed5f /resources/definitions/felixtec4dual.def.json | |
parent | e8b37ea39cc7f8d8c0c371506b2ae8cb10330db3 (diff) |
Fix brackets in start_gcode
Had square brackets instead of curly brackets in M109 commands. Still
worked OK from SD, but not from Octoprint.
Diffstat (limited to 'resources/definitions/felixtec4dual.def.json')
-rw-r--r-- | resources/definitions/felixtec4dual.def.json | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/resources/definitions/felixtec4dual.def.json b/resources/definitions/felixtec4dual.def.json index 276ab9dcbe..0d5fc85195 100644 --- a/resources/definitions/felixtec4dual.def.json +++ b/resources/definitions/felixtec4dual.def.json @@ -50,7 +50,7 @@ "material_diameter": { "default_value": 1.75 }, "machine_start_gcode": { - "default_value": "; FELIXprinters | www.FELIXprinters.com | Zeemanlaan 15 3401 MV IJsselstein The Netherlands\n; FELIX Tec 4 | Start Code Dual Extruders v1.0\n; Modified by kerog777@gmail.com\n;================================ \n;Initializing\nM80 ; Turn on the power supply\nM107 ; Turn off fans\nM117 Heating up\nM140 S{bed_temperature} ; Heatup Bed and continue\nM104 T0 S{print_temperature} ; Heatup hot-end and continue\nM104 T1 120 ; Heat extruder #2 to homing temp\nG28 ; Home all\nM109 T0 S[print_temperature] ; Heatup hot-end and continue\nM117 Purging\nT0 ; Select extruder 1\nG92 E0 ; Reset extruder\nM109 T0 S[extruder0_temperature] ; Heatup hot-end and wait\nT0 ; Select extruder 1\n\n;================================ ; Initializing done\nM117 FELIXprinting" + "default_value": "; FELIXprinters | www.FELIXprinters.com | Zeemanlaan 15 3401 MV IJsselstein The Netherlands\n; FELIX Tec 4 | Start Code Dual Extruders v1.0\n; Modified by kerog777@gmail.com\n;================================ \n;Initializing\nM80 ; Turn on the power supply\nM107 ; Turn off fans\nM117 Heating up\nM140 S{bed_temperature} ; Heatup Bed and continue\nM104 T0 S{print_temperature} ; Heatup hot-end and continue\nM104 T1 120 ; Heat extruder #2 to homing temp\nG28 ; Home all\nM109 T0 S{print_temperature} ; Heatup hot-end and continue\nM117 Purging\nT0 ; Select extruder 1\nG92 E0 ; Reset extruder\nM109 T0 S{extruder0_temperature} ; Heatup hot-end and wait\nT0 ; Select extruder 1\n\n;================================ ; Initializing done\nM117 FELIXprinting" }, "machine_end_gcode": { "default_value": "; FELIXprinters End Code Tec Series v1.0\n; Modified by kerog777@gmail.com\n; ================================= \n; Move extruder to park position\nG91 ; Make coordinates relative\nG1 Z2 F1000 ; Move z 2mm up\nG90 ; Use absolute coordinates again\n G1 X0 Y0 F15240 ; Move bed and printhead to ergonomic position\n\n; ================================= ; Turn off heaters\nM140 S0 ; Turn off bed heater\nT0 ; Select left extruder\nM104 T0 S0 ; Turn off heater and continue\n G92 E0 ; Reset extruder position\nG1 E-6 ; Retract filament 8mm\nG92 E0 ; Reset extruder position\nT1 ; Select right extruder\nM104 T1 S0 ; Turn off heater and continue\nG92 E0 ; Reset extruder position\nG1 E-6 ; Retract filament 8mm\nG92 E0 ; Reset extruder position\nT0 ; Select left extruder\n\n; ================================= ; Turn the rest off\nM107 ; Turn off fan\nM84 ; Disable steppers\nM117 Finished Printing!" |