Add new machine Goofoo Cube (#10962)

* add goofoo,renkforce printf

* 优化PVA打印的配置

* 修正双喷打印不能重叠的问题

* 修改配置信息

* 添加机型配置

* 新增 goofoo 2-1混色脚本，优化机型配置.

* 优化goofoo 2-1混色脚本

* 调整了机型配置

* 添加不同口径喷嘴

* 添加喷嘴口径

* 修改机器名称不对的问题

* modify setting_version = 16 to setting_version = 17

* modify renkforce & goofoo's files setting_version = 16 to 17

* modify pva support_pattern & e-one size

* modify pva support pattern to grid

* Add new machine Goofoo Cube

* modify some goofoo_cube definitions and 0.7_pla_standard

Co-authored-by: laiqiqi <laiqiqi886@163.com>

1 files changed, 29 insertions, 0 deletions

diff --git a/resources/definitions/goofoo_cube.def.json b/resources/definitions/goofoo_cube.def.json
new file mode 100644
index 0000000000..55a606ff11
--- /dev/null
+++ b/resources/definitions/goofoo_cube.def.json
@@ -0,0 +1,29 @@
+{
+    "name": "Goofoo Cube",
+    "version": 2,
+    "inherits": "goofoo_small",
+    "overrides": {
+
+        "machine_name": { "default_value": "Goofoo Cube" },
+        "machine_width": { "default_value": 80 },
+        "machine_depth": { "default_value": 80 },
+        "machine_height": { "default_value": 80 },
+        "machine_heated_bed": { "default_value": false },
+        "raft_margin": { "default_value": 5 },
+        "layer_height":{"default_value": 0.4},
+        "layer_height_0": {"default_value": 0.5},
+        "speed_print": {"value": 10},
+        "speed_travel": {"value": 10},
+        "speed_layer_0":{"value": 10},
+        "speed_print_layer_0":{"value": 10},
+        "speed_travel_layer_0":{"value": 10},
+        
+        "retraction_speed": {"default_value": 60},
+        "retraction_prime_speed":{"value": 80},
+        "adhesion_type": {"default_value": "skirt"}
+    },
+    "metadata": {
+        "author": "goofoo",
+        "visible": true
+    }
+}
\ No newline at end of file