Fix various typos

Found via `codespell -q 3 -S *.po,*.pot -L childs,initialy,lod,ned,te,slicable,sur,tutoriels,wont`

1 files changed, 1 insertions, 1 deletions

diff --git a/resources/definitions/ideagen3D_sapphire_plus.def.json b/resources/definitions/ideagen3D_sapphire_plus.def.json
index 55f471793a..a8541401c2 100644
--- a/resources/definitions/ideagen3D_sapphire_plus.def.json
+++ b/resources/definitions/ideagen3D_sapphire_plus.def.json
@@ -27,7 +27,7 @@
                 [30, 40]
             ]
         },
-        "machine_start_gcode": { "default_value": ";Start GCode by ideagen3D\n\nG1 Z15.0 F6000 ;Move the platform down 15mm\n\n;Initialize Temperature\nM140 S{material_bed_temperature_layer_0} ;heat bed and continue\nM104 S{material_print_temperature_layer_0} ;heat nozzle and continue\nM190 S{material_bed_temperature_layer_0} ;wait for bed temperature to reach inital layer temperature\nM109 S{material_print_temperature_layer_0} ;wait for hot end temperature to reach inital layer temperature\n\nG28 M420 S1 ; Home & Enable Bed Levelling\n\n;Prime the extruder\nG92 E0\nG1 X1 Y280 Z0.2 ;Prepare to Purge\nG1 Y20 Z0.2 F1500.0 E15 ;Purge line\nG92 E0" },
+        "machine_start_gcode": { "default_value": ";Start GCode by ideagen3D\n\nG1 Z15.0 F6000 ;Move the platform down 15mm\n\n;Initialize Temperature\nM140 S{material_bed_temperature_layer_0} ;heat bed and continue\nM104 S{material_print_temperature_layer_0} ;heat nozzle and continue\nM190 S{material_bed_temperature_layer_0} ;wait for bed temperature to reach initial layer temperature\nM109 S{material_print_temperature_layer_0} ;wait for hot end temperature to reach initial layer temperature\n\nG28 M420 S1 ; Home & Enable Bed Levelling\n\n;Prime the extruder\nG92 E0\nG1 X1 Y280 Z0.2 ;Prepare to Purge\nG1 Y20 Z0.2 F1500.0 E15 ;Purge line\nG92 E0" },
         "machine_end_gcode": { "default_value": ";End GCode by ideagen3D\n\nM104 S0 ;Set nozzle temperature to 0\nM140 S0 ;Set Bed temperature to 0\n\nG92 E1 ;Prepare to retract filament\nG1 E-1 F300 ;Retract filament\nG28 X0 Y0 ;Home X and Y\nM84 ;Disable Steppers" },
         "gantry_height": { "value": 65 }
     }