diff options
author | Filip Goc <filip@imade3d.com> | 2019-07-17 03:27:21 +0300 |
---|---|---|
committer | Filip Goc <filip@imade3d.com> | 2019-07-17 03:27:21 +0300 |
commit | 44420d5244eeabeddd70ef66f922a9c34970349c (patch) | |
tree | a2a77959b6d46572768657fdda1c3d4067b47e08 /resources/definitions/imade3d_jellybox_2.def.json | |
parent | 13df255477f4eadf72ef568a7771fd56157e6a1d (diff) |
Lower the priming line from 0.6 to 0.3mm
Diffstat (limited to 'resources/definitions/imade3d_jellybox_2.def.json')
-rw-r--r-- | resources/definitions/imade3d_jellybox_2.def.json | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/resources/definitions/imade3d_jellybox_2.def.json b/resources/definitions/imade3d_jellybox_2.def.json index bd9d3ae9ab..10b2043954 100644 --- a/resources/definitions/imade3d_jellybox_2.def.json +++ b/resources/definitions/imade3d_jellybox_2.def.json @@ -28,7 +28,7 @@ "machine_depth": { "default_value": 165 }, "machine_nozzle_size": { "default_value": 0.4 }, "machine_start_gcode": { - "default_value": ";---------------------------------------\n; ; ; Jellybox Start Script Begin ; ; ;\n;_______________________________________\n; for slicer: CURA 3\n; start gcode last modified Jun 1, 2019\n\n; Print Settings Summary\n; (leave these alone: this is only a list of the slicing settings)\n; (overwriting these values will NOT change your printer's behavior)\n; sliced for : {machine_name}\n; jobname : {jobname}\n; gcode generated : {day}, {date}, {time}\n; est. print time : {print_time}\n; nozzle diameter : {machine_nozzle_size}\n; filament diameter : {material_diameter}\n; layer height : {layer_height}\n; 1st layer height : {layer_height_0}\n; line width : {line_width} \n; outer wall wipe dist. : {wall_0_wipe_dist}\n; infill line width : {infill_line_width}\n; wall thickness : {wall_thickness}\n; top thickness : {top_thickness}\n; bottom thickness : {bottom_thickness}\n; infill density : {infill_sparse_density}\n; infill pattern : {infill_pattern}\n; print temperature : {material_print_temperature}\n; 1st layer print temp. : {material_print_temperature_layer_0}\n; heated bed temperature : {material_bed_temperature}\n; 1st layer bed temp. : {material_bed_temperature_layer_0}\n; regular fan speed : {cool_fan_speed_min}\n; max fan speed : {cool_fan_speed_max}\n; retraction amount : {retraction_amount}\n; retr. retract speed : {retraction_retract_speed}\n; retr. prime speed : {retraction_prime_speed}\n; build plate adhesion : {adhesion_type}\n; support ? {support_enable}\n; spiralized ? {magic_spiralize}\n\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nM117 Preparing ;write Preparing\nM190 S{material_bed_temperature_layer_0} ;wait for the bed to reach desired temperature\nM109 S180 ;wait for the extruder to reach 180C\nG28 ;home all axes\nM203 Z4 ;slow Z speed down for greater accuracy when probing\nG29 O ;run auto bed leveling procedure IF leveling not active already\n; M500 ;optionally save the mesh\nM203 Z7 ;pick up z speed again for printing\nG28 X ;home x to get as far from the plate as possible\nM420 S1 ;(re) enable bed leveling if turned off by the G28\nG0 Y0 F5000 ;position Y in front\nG0 Z15 F3000 ;position Z\nM109 S{material_print_temperature_layer_0} ;wait for the extruder to reach desired temperature\nM300 S440 P300 ;play a tone\n; M0 Ready! Click to start ; optionally, stop and wait for user to continue\nM420 S1 ;(re) enable bed leveling to make iron-sure\nM117 Print starting ;write Print starting\n;================ ;PRINT:LINE start\nG90 ;absolute positioning\nG92 E0 ;reset the extruder position\nM420 S1 ;(re) enable bed leveling to make iron-sure\nG0 Z0 ;get Z down\nM83 ;relative extrusion mode\nM420 S1 ;(re) enable bed leveling to make iron-sure\nG1 E20 F300 ;extrude __mm of feed stock\nG1 E18 F250 ;extrude __mm of feed stock\nG1 E10 F250 ;extrude __mm of feed stock\nG4 S2 ;pause for ooze\nM400 ;make sure all is finished\nM420 S1 ;(re) enable bed leveling to make iron-sure\nG0 F500 X3 Y0 Z0.6;get to the start of the LINE\nG1 E2 F300 ;extrude __mm of feed stock\nG1 F1000 X104 E10 ;print a thick LINE extruding __mm along the way\nG92 E0 ;reset the extruder position\n;---------------------------------------------\n; ; ; Jellybox Printer Start Script End ; ; ;\n;_____________________________________________\n" + "default_value": ";---------------------------------------\n; ; ; Jellybox Start Script Begin ; ; ;\n;_______________________________________\n; for slicer: CURA 3\n; start gcode last modified Jun 1, 2019\n\n; Print Settings Summary\n; (leave these alone: this is only a list of the slicing settings)\n; (overwriting these values will NOT change your printer's behavior)\n; sliced for : {machine_name}\n; jobname : {jobname}\n; gcode generated : {day}, {date}, {time}\n; est. print time : {print_time}\n; nozzle diameter : {machine_nozzle_size}\n; filament diameter : {material_diameter}\n; layer height : {layer_height}\n; 1st layer height : {layer_height_0}\n; line width : {line_width} \n; outer wall wipe dist. : {wall_0_wipe_dist}\n; infill line width : {infill_line_width}\n; wall thickness : {wall_thickness}\n; top thickness : {top_thickness}\n; bottom thickness : {bottom_thickness}\n; infill density : {infill_sparse_density}\n; infill pattern : {infill_pattern}\n; print temperature : {material_print_temperature}\n; 1st layer print temp. : {material_print_temperature_layer_0}\n; heated bed temperature : {material_bed_temperature}\n; 1st layer bed temp. : {material_bed_temperature_layer_0}\n; regular fan speed : {cool_fan_speed_min}\n; max fan speed : {cool_fan_speed_max}\n; retraction amount : {retraction_amount}\n; retr. retract speed : {retraction_retract_speed}\n; retr. prime speed : {retraction_prime_speed}\n; build plate adhesion : {adhesion_type}\n; support ? {support_enable}\n; spiralized ? {magic_spiralize}\n\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nM117 Preparing ;write Preparing\nM190 S{material_bed_temperature_layer_0} ;wait for the bed to reach desired temperature\nM109 S180 ;wait for the extruder to reach 180C\nG28 ;home all axes\nM203 Z4 ;slow Z speed down for greater accuracy when probing\nG29 O ;run auto bed leveling procedure IF leveling not active already\n; M500 ;optionally save the mesh\nM203 Z7 ;pick up z speed again for printing\nG28 X ;home x to get as far from the plate as possible\nM420 S1 ;(re) enable bed leveling if turned off by the G28\nG0 Y0 F5000 ;position Y in front\nG0 Z15 F3000 ;position Z\nM109 S{material_print_temperature_layer_0} ;wait for the extruder to reach desired temperature\nM300 S440 P300 ;play a tone\n; M0 Ready! Click to start ; optionally, stop and wait for user to continue\nM420 S1 ;(re) enable bed leveling to make iron-sure\nM117 Print starting ;write Print starting\n;================ ;PRINT:LINE start\nG90 ;absolute positioning\nG92 E0 ;reset the extruder position\nM420 S1 ;(re) enable bed leveling to make iron-sure\nG0 Z0 ;get Z down\nM83 ;relative extrusion mode\nM420 S1 ;(re) enable bed leveling to make iron-sure\nG1 E20 F300 ;extrude __mm of feed stock\nG1 E18 F250 ;extrude __mm of feed stock\nG1 E10 F250 ;extrude __mm of feed stock\nG4 S2 ;pause for ooze\nM400 ;make sure all is finished\nM420 S1 ;(re) enable bed leveling to make iron-sure\nG0 F500 X3 Y0 Z0.3;get to the start of the LINE\nG1 E2 F300 ;extrude __mm of feed stock\nG1 F1000 X152 E7 ;print a thick LINE extruding __mm along the way\nG92 E0 ;reset the extruder position\n;---------------------------------------------\n; ; ; Jellybox Printer Start Script End ; ; ;\n;_____________________________________________\n" }, "machine_end_gcode": { "default_value": "\n;---------------------------------\n;;; Jellybox End Script Begin ;;;\n;_________________________________\n; end gcode last modified Nov 30, 2018\nM117 Finishing Up ;write Finishing Up\n\nM107 ;turn the fan off\nM104 S0 ;extruder heater off\nM140 S0 ;bed heater off (if you have it)\nG91 ;relative positioning (includes extruder)\nG1 E-1 F2500 ;retract the filament a bit before lifting the nozzle to release some of the pressure\nG1 Z0.5 E-4 X-10 F9000 ;get out and retract filament even more\nG1 E-25 F2500 ;retract even more\nG90 ;absolute positioning (includes extruder)\nG28 X ;home X so the head is out of the way\nG1 Y140 ;move Y forward, so the print is more accessible\nM84 ;steppers off\n\nM117 Print finished ;write Print finished\n;---------------------------------------\n;;; Jellybox End Script End ;;;\n;_______________________________________" |