diff options
author | Adam Rumjahn <innovo3d@users.noreply.github.com> | 2017-11-24 04:14:43 +0300 |
---|---|---|
committer | GitHub <noreply@github.com> | 2017-11-24 04:14:43 +0300 |
commit | 43c9df5703ed10f51a7f65ea906bdaf8232dce3d (patch) | |
tree | 14026cb719240dc42892013023db175b5325378c /resources/definitions/innovo_inventor.def.json | |
parent | 2e5ffbfe544d0993dd70f2affa81669ea4e75c54 (diff) |
Deactivate G32 auto leveling before print
don't need this any more on the new printers
Diffstat (limited to 'resources/definitions/innovo_inventor.def.json')
-rw-r--r-- | resources/definitions/innovo_inventor.def.json | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/resources/definitions/innovo_inventor.def.json b/resources/definitions/innovo_inventor.def.json index dd7e87d446..ea54e1fcc9 100644 --- a/resources/definitions/innovo_inventor.def.json +++ b/resources/definitions/innovo_inventor.def.json @@ -53,7 +53,7 @@ "default_value": "RepRap (Marlin/Sprinter)" }, "machine_start_gcode": { - "default_value": "G28 ; Home extruder\nM107 ; Turn off fan\nG90 ; Absolute positioning\nM82 ; Extruder in absolute mode\n{IF_BED}M190 S{BED}\n{IF_EXT0}M104 T0 S{TEMP0}\n{IF_EXT0}M109 T0 S{TEMP0}\n{IF_EXT1}M104 T1 S{TEMP1}\n{IF_EXT1}M109 T1 S{TEMP1}\nG32 S3 ; auto level\nG92 E0 ; Reset extruder position" + "default_value": "G28 ; Home extruder\nM107 ; Turn off fan\nG90 ; Absolute positioning\nM82 ; Extruder in absolute mode\n{IF_BED}M190 S{BED}\n{IF_EXT0}M104 T0 S{TEMP0}\n{IF_EXT0}M109 T0 S{TEMP0}\n{IF_EXT1}M104 T1 S{TEMP1}\n{IF_EXT1}M109 T1 S{TEMP1}\n;G32 S3 ; auto level\nG92 E0 ; Reset extruder position" }, "machine_end_gcode": { "default_value": "M104 S0 ; turn off extruders\nM140 S0 ; heated bed heater off\nG91 ; relative positioning\nG1 E-2 F5000; retract 2mm\nG28 Z; move bed down\nG90 ; absolute positioning\nM84 ; disable motors" |