julia machine definition

1 files changed, 52 insertions, 0 deletions

diff --git a/resources/definitions/julia.def.json b/resources/definitions/julia.def.json
new file mode 100644
index 0000000000..fecf1bd5c1
--- /dev/null
+++ b/resources/definitions/julia.def.json
@@ -0,0 +1,52 @@
+{
+    "id": "julia",
+    "name": "julia",
+    "version": 2,
+    "inherits": "fdmprinter",
+    "metadata": {
+        "visible": true,
+        "author": "Ultimaker",
+        "manufacturer": "Unknown",
+        "category": "Other",
+        "file_formats": "text/x-gcode",
+        "platform_offset": [ 0, 0, 0]
+    },
+
+    "overrides": {
+        "machine_start_gcode": {
+            "default_value": " ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}\n ;Print time: {print_time}\n ;Filament used: {filament_amount}m {filament_weight}g\n ;Filament cost: {filament_cost}\n G21        ;metric values\n M107\n G28\n G29\n G90        ;absolute positioning\n G92 E0; reset extruder distance\n G1 Z5 F300 ;move nozzle up 5mm for safe homing\n G1 X0 Y0 Z0 F5000; move nozzle to home\n M300 S600P200\n M300 S800 P200\n M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line\n M109 S{print_temperature} ;Uncomment to add your own temperature line\n M82        ;set extruder to absolute mode\n M107       ;start with the fan off\n G1 Z15.0 F{travel_speed} ;move the platform down 15mm\n G92 E0                  ;zero the extruded length\n G1 F200 E3              ;extrude 3mm of feed stock\n G92 E0                  ;zero the extruded length again\n G1 F{travel_speed}\n ;Put printing message on LCD screen\n M117 Printing...\n"
+        },
+        "machine_end_gcode": {
+            "default_value": " M104 S0                     ;extruder heater off\n M140 S0                     ;heated bed heater off (if you have it)\n G91                                    ;relative positioning\n G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more\n G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way\n M84                         ;steppers off\n G90                         ;absolute positioning\n ;{profile_string}\n"
+        },
+        "material_bed_temperature": { "default_value": 100 },
+        "layer_height": { "default_value": 0.2 },
+        "support_angle": { "default_value": 30 },
+        "infill_overlap": { "default_value": 30 },
+        "layer_height_0": { "default_value": 0.2 },
+        "speed_print": { "default_value": 80 },
+        "speed_wall_0": { "default_value": 30 },
+        "speed_travel": { "default_value": 150 },
+        "brim_line_count": { "default_value": 15 },
+        "skin_overlap": { "default_value": 30 },
+        "prime_tower_size": { "default_value": 8.660254037844387 },
+        "material_diameter": { "default_value": 1.75 },
+        "bottom_thickness": { "default_value": 0.8 },
+        "retraction_amount": { "default_value": 3 },
+        "speed_topbottom": { "default_value": 80 },
+        "material_print_temperature": { "default_value": 230 },
+        "support_pattern": { "default_value": "grid" },
+        "speed_infill": { "default_value": 80 },
+        "infill_sparse_density": { "default_value": 10 },
+        "top_thickness": { "default_value": 0.8 },
+        "machine_extruder_count": { "default_value": 1 },
+        "retraction_combing": { "default_value": "off" },
+        "machine_heated_bed": { "default_value": true },
+        "machine_center_is_zero": { "default_value": false },
+        "machine_height": { "default_value": 260 },
+        "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
+        "machine_depth": { "default_value": 250 },
+        "machine_width": { "default_value": 210 },
+        "machine_name": { "default_value": "Julia V2" }
+    }
+}