Added LotMaxx sc10 and sc20 profile

1 files changed, 146 insertions, 0 deletions

diff --git a/resources/definitions/lotmaxx_sc20.def.json b/resources/definitions/lotmaxx_sc20.def.json
new file mode 100644
index 0000000000..802560fb59
--- /dev/null
+++ b/resources/definitions/lotmaxx_sc20.def.json
@@ -0,0 +1,146 @@
+{
+    "name": "Lotmaxx SC-20",
+    "version": 2,
+    "inherits": "fdmprinter",
+    "overrides": {
+        "machine_name": { "default_value": "Lotmaxx SC-20" },
+        "machine_width": { "default_value": 235 },
+        "machine_depth": { "default_value": 235 },
+        "machine_height": { "default_value": 320 },
+        "machine_head_polygon": { "default_value": [
+                [-32,11],
+                [-32,-32], 
+                [28,-32],
+                [28,11]
+            ]
+        },
+        "gantry_height": { "value": 40 },
+        "machine_start_gcode": {
+            "default_value": "; SC-20 Custom Start G-code\nG28 ; Home all axes\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position\nG1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line\nG1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little\nG1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\n; End of custom start GCode"
+        },
+        "machine_end_gcode": {
+            "default_value": "; SC-20 Custom End G-code\nG4 ; Wait\nM220 S100 ; Reset Speed factor override percentage to default (100%)\nM221 S100 ; Reset Extrude factor override percentage to default (100%)\nG91 ; Set coordinates to relative\nG1 F1800 E-3 ; Retract filament 3 mm to prevent oozing\nG1 F3000 Z20 ; Move Z Axis up 20 mm to allow filament ooze freely\nG90 ; Set coordinates to absolute\nG1 X0 Y{machine_depth} F1000 ; Move Heat Bed to the front for easy print removal\nM84 ; Disable stepper motors\n; End of custom end GCode"
+        },
+        "machine_max_jerk_xy":{
+          "value":10
+        },
+        "machine_max_jerk_z":{
+          "value":0.4
+        },
+        "machine_max_jerk_e":{
+          "value":5
+        },
+        "machine_heated_bed":{
+          "default_value":true
+        },
+        "material_diameter":{
+          "default_value":1.75
+        },
+        "jerk_print":{
+          "value":8
+        },
+        "jerk_travel":{
+          "value":"jerk_print"
+        },
+        "jerk_travel_layer_0":{
+          "value":"jerk_travel"
+        },
+        "acceleration_enabled":{
+          "value":false
+        },
+        "jerk_enabled":{
+          "value":false
+        },
+        "speed_print":{
+          "value":60.0
+        },
+        "speed_infill":{
+          "value":"speed_print * 2"
+        },
+        "speed_wall":{
+          "value":"speed_print / 2"
+        },
+        "speed_wall_0":{
+          "value":"speed_wall"
+        },
+        "speed_wall_x":{
+          "value":"speed_wall"
+        },
+        "speed_topbottom":{
+          "value":"speed_print / 2"
+        },
+        "speed_roofing":{
+          "value":"speed_topbottom"
+        },
+        "speed_travel":{
+          "value":"150.0 if speed_print < 60 else 250.0 if speed_print > 100 else speed_print * 2.5"
+        },
+        "speed_layer_0":{
+          "value":20.0
+        },
+        "speed_print_layer_0":{
+          "value":"speed_layer_0"
+        },
+        "speed_travel_layer_0":{
+          "value":"100 if speed_layer_0 < 20 else 150 if speed_layer_0 > 30 else speed_layer_0 * 5"
+        },
+        "speed_prime_tower":{
+          "value":"speed_topbottom"
+        },
+        "speed_support":{
+          "value":"speed_wall_0"
+        },
+        "speed_support_interface":{
+          "value":"speed_topbottom"
+        },
+        "skirt_brim_speed":{
+          "value":"speed_layer_0"
+        },
+        "retraction_enable":{
+          "value":true
+        },
+        "retraction_count_max":{
+          "value":100
+        },
+        "retraction_extrusion_window":{
+          "value":10
+        },
+        "retraction_min_travel":{
+          "value":1.5
+        },
+        "cool_fan_full_at_height":{
+          "value":"layer_height_0 + 2 * layer_height"
+        },
+        "cool_fan_enabled":{
+          "value":true
+        },
+        "cool_min_layer_time":{
+          "value":10
+        },
+        "meshfix_maximum_resolution":{
+          "value":"0.05"
+        },
+        "meshfix_maximum_travel_resolution":{
+          "value":"meshfix_maximum_resolution"
+        },
+        "adhesion_type": { "value": "'none' if support_enable else 'skirt'" },
+        "skirt_gap":{
+          "value":5.0
+        },
+        "skirt_line_count":{
+          "value":4
+        }
+    },
+    "metadata": {
+        "visible": true,
+        "author": "lotmaxx.com",
+        "manufacturer": "Lotmaxx",
+
+        "platform": "lotmaxx_sc_10_20_platform.stl",
+        "machine_extruder_trains": {
+            "0": "creality_base_extruder_0"
+        },
+        "has_materials": true,
+        "preferred_quality_type": "normal"
+    }
+}
\ No newline at end of file