Use default value rather than 'default'

Default is outdated.

Contributes to issue CURA-1278.

1 files changed, 58 insertions, 58 deletions

diff --git a/resources/definitions/maker_starter.def.json b/resources/definitions/maker_starter.def.json
index 81ad45698e..376fea8c29 100644
--- a/resources/definitions/maker_starter.def.json
+++ b/resources/definitions/maker_starter.def.json
@@ -13,178 +13,178 @@
 
     "overrides": {
         "machine_width": {
-            "default": 210
+            "default_value": 210
         },
         "machine_depth": {
-            "default": 185
+            "default_value": 185
         },
         "machine_height": {
-            "default": 200
+            "default_value": 200
         },
         "machine_heated_bed": {
-            "default": false
+            "default_value": false
         },
         "machine_center_is_zero": {
-            "default": false
+            "default_value": false
         },
         "machine_nozzle_size": {
-            "default": 0.4
+            "default_value": 0.4
         },
         "machine_nozzle_heat_up_speed": {
-            "default": 2
+            "default_value": 2
         },
         "machine_nozzle_cool_down_speed": {
-            "default": 2
+            "default_value": 2
         },
         "machine_head_shape_min_x": {
-            "default": 0
+            "default_value": 0
         },
         "machine_head_shape_min_y": {
-            "default": 0
+            "default_value": 0
         },
         "machine_head_shape_max_x": {
-            "default": 0
+            "default_value": 0
         },
         "machine_head_shape_max_y": {
-            "default": 0
+            "default_value": 0
         },
         "machine_nozzle_gantry_distance": {
-            "default": 55
+            "default_value": 55
         },
         "machine_gcode_flavor": {
-            "default": "RepRap"
+            "default_value": "RepRap"
         },
         "machine_disallowed_areas": {
-            "default": []
+            "default_value": []
         },
         "machine_platform_offset": {
-            "default": [0, 0, 0]
+            "default_value": [0, 0, 0]
         },
         "machine_nozzle_tip_outer_diameter": {
-            "default": 1
+            "default_value": 1
         },
         "machine_nozzle_head_distance": {
-            "default": 3
+            "default_value": 3
         },
         "machine_nozzle_expansion_angle": {
-            "default": 45
+            "default_value": 45
         },
         "layer_height": {
-            "default": 0.2
+            "default_value": 0.2
         },
         "layer_height_0": {
-            "default": 0.2
+            "default_value": 0.2
         },
         "wall_line_count": {
-            "default": 2
+            "default_value": 2
         },
         "top_layers": {
-            "default": 4
+            "default_value": 4
         },
         "bottom_layers": {
-            "default": 4
+            "default_value": 4
         },
         "speed_print": {
-            "default": 50
+            "default_value": 50
         },
         "speed_wall": {
-            "default": 30
+            "default_value": 30
         },
         "speed_wall_0": {
-            "default": 30
+            "default_value": 30
         },
         "speed_wall_x": {
-            "default": 30
+            "default_value": 30
         },
         "speed_topbottom": {
-            "default": 50
+            "default_value": 50
         },
         "speed_support": {
-            "default": 50
+            "default_value": 50
         },
         "speed_travel": {
-            "default": 120
+            "default_value": 120
         },
         "speed_layer_0": {
-            "default": 20
+            "default_value": 20
         },
         "skirt_speed": {
-            "default": 15
+            "default_value": 15
         },
         "speed_slowdown_layers": {
-            "default": 4
+            "default_value": 4
         },
         "infill_sparse_density": {
-            "default": 20
+            "default_value": 20
         },
         "cool_fan_speed_min": {
-            "default": 50
+            "default_value": 50
         },
         "cool_fan_speed_max": {
-            "default": 100
+            "default_value": 100
         },
         "cool_fan_full_layer": {
-            "default": 4
+            "default_value": 4
         },
         "cool_min_layer_time": {
-            "default": 5
+            "default_value": 5
         },
         "cool_min_layer_time_fan_speed_max": {
-            "default": 10
+            "default_value": 10
         },
         "support_type": {
-            "default": "Everywhere"
+            "default_value": "Everywhere"
         },
         "support_angle": {
-            "default": 45
+            "default_value": 45
         },
         "support_xy_distance": {
-            "default": 1
+            "default_value": 1
         },
         "support_z_distance": {
-            "default": 0.2
+            "default_value": 0.2
         },
         "support_top_distance": {
-            "default": 0.2
+            "default_value": 0.2
         },
         "support_bottom_distance": {
-            "default": 0.24
+            "default_value": 0.24
         },
         "support_pattern": {
-            "default": "ZigZag"
+            "default_value": "ZigZag"
         },
         "support_infill_rate": {
-            "default": 15
+            "default_value": 15
         },
         "adhesion_type": {
-            "default": "Raft"
+            "default_value": "Raft"
         },
         "skirt_minimal_length": {
-            "default": 100
+            "default_value": 100
         },
         "raft_base_line_spacing": {
-            "default": 2
+            "default_value": 2
         },
         "raft_base_thickness": {
-            "default": 0.3
+            "default_value": 0.3
         },
         "raft_base_line_width": {
-            "default": 2
+            "default_value": 2
         },
         "raft_base_speed": {
-            "default": 15
+            "default_value": 15
         },
         "raft_interface_thickness": {
-            "default": 0.24
+            "default_value": 0.24
         },
         "raft_interface_line_width": {
-            "default": 0.6
+            "default_value": 0.6
         },
         "raft_airgap": {
-            "default": 0.2
+            "default_value": 0.2
         },
         "raft_surface_layers": {
-            "default": 2
+            "default_value": 2
         }
     }
 }
\ No newline at end of file