Adding Monoprice Mini Delta definition file.

1 files changed, 80 insertions, 0 deletions

diff --git a/resources/definitions/mp_mini_delta.def.json b/resources/definitions/mp_mini_delta.def.json
new file mode 100644
index 0000000000..1804f30b37
--- /dev/null
+++ b/resources/definitions/mp_mini_delta.def.json
@@ -0,0 +1,80 @@
+{

+    "id": "mp_mini_delta",

+	"version": 2,

+    "name": "MP Mini Delta",

+	"inherits": "fdmprinter",

+    "metadata": {

+        "author": "MPMD Facebook Group",

+        "manufacturer": "Monoprice",

+		"category": "Other",

+        "file_formats": "text/x-gcode",

+        "platform": "mp_mini_delta_platform.stl",	

+        "supports_usb_connection": true,

+        "has_machine_quality": false,

+        "visible": true,

+		"platform_offset": [0, 0, 0],

+		"has_materials": true,

+		"has_variants": false,

+		"has_machine_materials": false,

+		"has_variant_materials": false,

+		"preferred_quality_type": "normal",

+        "machine_extruder_trains":

+        {

+            "0": "mp_mini_delta_extruder_0"

+        }

+    },

+

+    "overrides": {

+ 		"machine_start_gcode":

+		{

+			"default_value": ";MPMD Basic Calibration Tutorial: \n; https://www.thingiverse.com/thing:3892011 \n; \n; If you want to put calibration values in your \n; Start Gcode, put them here. \n; \n;If on stock firmware, at minimum, consider adding \n;M665 R here since there is a firmware bug.  \n; \n; Calibration part ends here \n; \nG90 ; switch to absolute positioning \nG92 E0 ; reset extrusion distance \nG1 E20 F200 ; purge 20mm of filament to prime nozzle. \nG92 E0 ; reset extrusion distance \nG4 S5 ; Pause for 5 seconds to allow time for removing extruded filament \nG28 ; start from home position \nG1 E-6 F900 ; retract 6mm of filament before starting the bed leveling process \nG92 E0 ; reset extrusion distance \nG4 S5 ; pause for 5 seconds to allow time for removing extruded filament \nG29 P2 Z0.28 ; Auto-level ; ADJUST Z higher or lower to set first layer height. Start with 0.02 adjustments. \nG1 Z30 ; raise Z 30mm to prepare for priming the nozzle \nG1 E5 F200 ; extrude 5mm of filament to help prime the nozzle just prior to the start of the print \nG92 E0 ; reset extrusion distance \nG4 S5 ; pause for 5 seconds to allow time for cleaning the nozzle and build plate if needed "

+		},

+		"machine_end_gcode":

+		{		

+			"default_value": "M107; \nM104 S0; turn off hotend heater \nM140 S0; turn off bed heater \nG91; Switch to use Relative Coordinates \nG1 E-2 F300; retract the filament a bit before lifting the nozzle to release some of the pressure \nG1 Z5 E-5 F4800; move nozzle up a bit and retract filament even more \nG28 X0; return to home positions so the nozzle is out of the way \nM84; turn off stepper motors \nG90; switch to absolute positioning \nM82; absolute extrusion mode"

+		},

+		"gantry_height": {

+            "default_value": 120

+        },

+        "machine_width": { "default_value": 110 },

+        "machine_depth": { "default_value": 110 },

+        "machine_height": { "default_value": 120 },

+        "machine_heated_bed": { "default_value": true },

+        "machine_shape": { "default_value": "elliptic" },

+        "machine_center_is_zero": { "default_value": true },

+        "machine_nozzle_size": {

+            "default_value": 0.4,

+            "minimum_value": 0.10,

+            "maximum_value": 0.80

+        },

+        "layer_height": {

+            "default_value": 0.14, 

+            "minimum_value": 0.04

+        },

+		"layer_height_0": {

+            "default_value": 0.21,

+            "minimum_value": 0.07

+        },

+        "line_width": { "value": "round(machine_nozzle_size * 0.875, 2)" },

+        "material_print_temperature_layer_0": { "value": "material_print_temperature + 5" },

+        "material_bed_temperature_layer_0": { "value": "material_bed_temperature + 5" },

+        "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },

+        "machine_max_feedrate_x": { "default_value": 150 },

+        "machine_max_feedrate_y": { "default_value": 150 },

+        "machine_max_feedrate_z": { "default_value": 150 },

+        "machine_max_feedrate_e": { "default_value": 50 },

+        "machine_max_acceleration_x": { "default_value": 800 },

+        "machine_max_acceleration_y": { "default_value": 800 },

+        "machine_max_acceleration_z": { "default_value": 800 },

+        "machine_max_acceleration_e": { "default_value": 10000 },

+        "machine_acceleration": { "default_value": 3000 },

+        "machine_max_jerk_xy": { "default_value": 20 },

+        "machine_max_jerk_z": { "default_value": 20 },

+        "machine_max_jerk_e": { "default_value": 5},

+        "retraction_amount": { "default_value": 4 },

+        "retraction_speed": { "default_value": 50 },

+        "retraction_hop_enabled": { "default_value": false },

+        "retract_at_layer_change": { "default_value": true },

+        "coasting_enable": { "default_value": true }

+    }

+}
\ No newline at end of file