Simplifying mp_mini_delta.def.json

Removing minimum/maximum nozzle size, minimum layer_height, and minimum layer_height_0.

1 files changed, 22 insertions, 26 deletions

diff --git a/resources/definitions/mp_mini_delta.def.json b/resources/definitions/mp_mini_delta.def.json
index 8d4b34f4d5..5aac007b88 100644
--- a/resources/definitions/mp_mini_delta.def.json
+++ b/resources/definitions/mp_mini_delta.def.json
@@ -1,22 +1,22 @@
 {

-	"version": 2,

+    "version": 2,

     "name": "MP Mini Delta",

-	"inherits": "fdmprinter",

+    "inherits": "fdmprinter",

     "metadata": {

         "author": "MPMD Facebook Group",

         "manufacturer": "Monoprice",

-		"category": "Other",

+        "category": "Other",

         "file_formats": "text/x-gcode",

-        "platform": "mp_mini_delta_platform.stl",	

+        "platform": "mp_mini_delta_platform.stl",    

         "supports_usb_connection": true,

         "has_machine_quality": false,

         "visible": true,

-		"platform_offset": [0, 0, 0],

-		"has_materials": true,

-		"has_variants": false,

-		"has_machine_materials": false,

-		"has_variant_materials": false,

-		"preferred_quality_type": "normal",

+        "platform_offset": [0, 0, 0],

+        "has_materials": true,

+        "has_variants": false,

+        "has_machine_materials": false,

+        "has_variant_materials": false,

+        "preferred_quality_type": "normal",

         "machine_extruder_trains":

         {

             "0": "mp_mini_delta_extruder_0"

@@ -24,14 +24,14 @@
     },

 

     "overrides": {

- 		"machine_start_gcode":

-		{

-			"default_value": ";MPMD Basic Calibration Tutorial: \n; https://www.thingiverse.com/thing:3892011 \n; \n; If you want to put calibration values in your \n; Start Gcode, put them here. \n; \n;If on stock firmware, at minimum, consider adding \n;M665 R here since there is a firmware bug.  \n; \n; Calibration part ends here \n; \nG90 ; switch to absolute positioning \nG92 E0 ; reset extrusion distance \nG1 E20 F200 ; purge 20mm of filament to prime nozzle. \nG92 E0 ; reset extrusion distance \nG4 S5 ; Pause for 5 seconds to allow time for removing extruded filament \nG28 ; start from home position \nG1 E-6 F900 ; retract 6mm of filament before starting the bed leveling process \nG92 E0 ; reset extrusion distance \nG4 S5 ; pause for 5 seconds to allow time for removing extruded filament \nG29 P2 Z0.28 ; Auto-level ; ADJUST Z higher or lower to set first layer height. Start with 0.02 adjustments. \nG1 Z30 ; raise Z 30mm to prepare for priming the nozzle \nG1 E5 F200 ; extrude 5mm of filament to help prime the nozzle just prior to the start of the print \nG92 E0 ; reset extrusion distance \nG4 S5 ; pause for 5 seconds to allow time for cleaning the nozzle and build plate if needed "

-		},

-		"machine_end_gcode":

-		{		

-			"default_value": "M107; \nM104 S0; turn off hotend heater \nM140 S0; turn off bed heater \nG91; Switch to use Relative Coordinates \nG1 E-2 F300; retract the filament a bit before lifting the nozzle to release some of the pressure \nG1 Z5 E-5 F4800; move nozzle up a bit and retract filament even more \nG28 X0; return to home positions so the nozzle is out of the way \nM84; turn off stepper motors \nG90; switch to absolute positioning \nM82; absolute extrusion mode"

-		},

+        "machine_start_gcode":

+        {

+            "default_value": ";MPMD Basic Calibration Tutorial: \n; https://www.thingiverse.com/thing:3892011 \n; \n; If you want to put calibration values in your \n; Start Gcode, put them here. \n; \n;If on stock firmware, at minimum, consider adding \n;M665 R here since there is a firmware bug.  \n; \n; Calibration part ends here \n; \nG90 ; switch to absolute positioning \nG92 E0 ; reset extrusion distance \nG1 E20 F200 ; purge 20mm of filament to prime nozzle. \nG92 E0 ; reset extrusion distance \nG4 S5 ; Pause for 5 seconds to allow time for removing extruded filament \nG28 ; start from home position \nG1 E-6 F900 ; retract 6mm of filament before starting the bed leveling process \nG92 E0 ; reset extrusion distance \nG4 S5 ; pause for 5 seconds to allow time for removing extruded filament \nG29 P2 Z0.28 ; Auto-level ; ADJUST Z higher or lower to set first layer height. Start with 0.02 adjustments. \nG1 Z30 ; raise Z 30mm to prepare for priming the nozzle \nG1 E5 F200 ; extrude 5mm of filament to help prime the nozzle just prior to the start of the print \nG92 E0 ; reset extrusion distance \nG4 S5 ; pause for 5 seconds to allow time for cleaning the nozzle and build plate if needed "

+        },

+        "machine_end_gcode":

+        {        

+            "default_value": "M107; \nM104 S0; turn off hotend heater \nM140 S0; turn off bed heater \nG91; Switch to use Relative Coordinates \nG1 E-2 F300; retract the filament a bit before lifting the nozzle to release some of the pressure \nG1 Z5 E-5 F4800; move nozzle up a bit and retract filament even more \nG28 X0; return to home positions so the nozzle is out of the way \nM84; turn off stepper motors \nG90; switch to absolute positioning \nM82; absolute extrusion mode"

+        },

         "machine_width": { "default_value": 110 },

         "machine_depth": { "default_value": 110 },

         "machine_height": { "default_value": 120 },

@@ -39,17 +39,13 @@
         "machine_shape": { "default_value": "elliptic" },

         "machine_center_is_zero": { "default_value": true },

         "machine_nozzle_size": {

-            "default_value": 0.4,

-            "minimum_value": 0.10,

-            "maximum_value": 0.80

+            "default_value": 0.4

         },

         "layer_height": {

-            "default_value": 0.14, 

-            "minimum_value": 0.04

+            "default_value": 0.14

         },

-		"layer_height_0": {

-            "default_value": 0.21,

-            "minimum_value": 0.07

+        "layer_height_0": {

+            "default_value": 0.21

         },

         "material_bed_temperature": { "value": 40 },

         "line_width": { "value": "round(machine_nozzle_size * 0.875, 2)" },