Overwrite gantry height value instead of default_value

Because the default in fdmprinter has a formula in the value, the default_value properties wouldn't get used any more.

1 files changed, 25 insertions, 25 deletions

diff --git a/resources/definitions/nwa3d_a5.def.json b/resources/definitions/nwa3d_a5.def.json
index 3deb0027fd..2829b06927 100644
--- a/resources/definitions/nwa3d_a5.def.json
+++ b/resources/definitions/nwa3d_a5.def.json
@@ -15,50 +15,50 @@
         "preferred_quality_type": "normal",
         "has_machine_quality": true,
         "preferred_material": "generic_pla",
-        "machine_extruder_trains": 
+        "machine_extruder_trains":
         {
             "0": "nwa3d_a5_extruder_0"
         }
     },
-  
+
     "overrides": {
-        "machine_name": { 
-            "default_value": "NWA3D A5" 
+        "machine_name": {
+            "default_value": "NWA3D A5"
         },
-        "machine_width": { 
-            "default_value": 125 
+        "machine_width": {
+            "default_value": 125
         },
-        "machine_height": { 
-            "default_value": 100 
+        "machine_height": {
+            "default_value": 100
         },
-        "machine_depth": { 
-            "default_value": 150 
+        "machine_depth": {
+            "default_value": 150
         },
-        "machine_head_polygon": { 
+        "machine_head_polygon": {
             "default_value": [
-                [-30, 34], 
-                [-30, -32], 
-                [30, -32], 
+                [-30, 34],
+                [-30, -32],
+                [30, -32],
                 [30, 34]
-            ] 
+            ]
         },
-        "gantry_height": { 
-            "default_value": 30 
+        "gantry_height": {
+            "value": "30"
         },
-        "machine_heated_bed": { 
-            "default_value": false 
+        "machine_heated_bed": {
+            "default_value": false
         },
         "material_diameter": {
             "default_value": 1.75
         },
-        "machine_gcode_flavor": { 
-            "default_value": "RepRap (RepRap)" 
+        "machine_gcode_flavor": {
+            "default_value": "RepRap (RepRap)"
         },
-        "machine_start_gcode": { 
-            "default_value": "G28 ; Home\nG1 Z15.0 F6000 ; Move Z axis up 15mm\n ; Prime the extruder\nG92 E0\nG1 F200 E3\nG92 E0" 
+        "machine_start_gcode": {
+            "default_value": "G28 ; Home\nG1 Z15.0 F6000 ; Move Z axis up 15mm\n ; Prime the extruder\nG92 E0\nG1 F200 E3\nG92 E0"
         },
-        "machine_end_gcode": { 
-            "default_value": "M104 S0\nM140 S0\n ; Retract the filament\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\nM84" 
+        "machine_end_gcode": {
+            "default_value": "M104 S0\nM140 S0\n ; Retract the filament\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\nM84"
         }
     }
 }