diff options
author | Ghostkeeper <rubend@tutanota.com> | 2019-03-13 17:43:39 +0300 |
---|---|---|
committer | Ghostkeeper <rubend@tutanota.com> | 2019-03-13 17:43:58 +0300 |
commit | 8e81847fa70f8bbeaf14f6aecd764b48586aea94 (patch) | |
tree | fe40f8c039431972f68fbe87b1916e23acbbd377 /resources/definitions/raise3D_N2_dual.def.json | |
parent | 0fbfe9e6c9c7198e567017d8fbc6cb50fd1739c5 (diff) |
Use periods instead of ellipses
Because some printers don't accept non-ANSI characters and will stop printing when they encounter one.
Diffstat (limited to 'resources/definitions/raise3D_N2_dual.def.json')
-rw-r--r-- | resources/definitions/raise3D_N2_dual.def.json | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/resources/definitions/raise3D_N2_dual.def.json b/resources/definitions/raise3D_N2_dual.def.json index eff5884da8..f4600bc027 100644 --- a/resources/definitions/raise3D_N2_dual.def.json +++ b/resources/definitions/raise3D_N2_dual.def.json @@ -67,7 +67,7 @@ "default_value": "RepRap (Marlin/Sprinter)" }, "machine_start_gcode": { - "default_value": "G90\nG21\n; home all axes\nG28\nG92 X0 Y0 Z0\n; move heatbed into position\nG1 X20.0 Y20.0 Z1.0 F1000\n; zero extruders\nG92 E0 E1\nT0; right tool\n; set extruder steps per mm\nM92 E140\nT1; left tool\n; set extruder steps per mm\nM92 E140\nT0; left tool\nG92 E0 E1\n; purge nozzle\nG1 E25 F250\nT1; left tool\nG92 E0 E1\n; purge nozzle\nG1 E25 F250\n; zero extruders\nG92 E0 E1\n; move heatbed down a little more\nG1 Z5.0 F20\n; wait 600ms\nG4 600\n; move to tack down the strands\nG1 X20.0 Y30.0 Z0 F9000\n; wait 600ms\nG4 600\n;move up a bit\nG1 Z5.0 F9000\n; wait 300ms\nG4 300\n;fast move to center\nG1 X152.5 Y152.5 F9000\nT0\n;Raise3D Job Start\nM117 Printing…\nM1001\n" + "default_value": "G90\nG21\n; home all axes\nG28\nG92 X0 Y0 Z0\n; move heatbed into position\nG1 X20.0 Y20.0 Z1.0 F1000\n; zero extruders\nG92 E0 E1\nT0; right tool\n; set extruder steps per mm\nM92 E140\nT1; left tool\n; set extruder steps per mm\nM92 E140\nT0; left tool\nG92 E0 E1\n; purge nozzle\nG1 E25 F250\nT1; left tool\nG92 E0 E1\n; purge nozzle\nG1 E25 F250\n; zero extruders\nG92 E0 E1\n; move heatbed down a little more\nG1 Z5.0 F20\n; wait 600ms\nG4 600\n; move to tack down the strands\nG1 X20.0 Y30.0 Z0 F9000\n; wait 600ms\nG4 600\n;move up a bit\nG1 Z5.0 F9000\n; wait 300ms\nG4 300\n;fast move to center\nG1 X152.5 Y152.5 F9000\nT0\n;Raise3D Job Start\nM117 Printing...\nM1001\n" }, "machine_end_gcode": { "default_value": "M107\nM1002\nM104 S0 T1\nM104 S0 T0\nM140 S0\nM117 Print Complete.\nG28 X0 Y0\nG91\nG1 Z10\nG90\nM84" |