diff options
author | Dirk O. Kaar <dok@dok-net.net> | 2020-01-03 10:51:03 +0300 |
---|---|---|
committer | Dirk O. Kaar <dok@dok-net.net> | 2020-01-03 17:46:13 +0300 |
commit | ab6835e93beb82bd7005e6c31155bbc9d4f9da50 (patch) | |
tree | 518908d17c47281b46d7c47e6140a798d12b531d /resources/definitions/renkforce_rf100_v2.def.json | |
parent | eb1ae9f18d18715e7b73293a0e11c3abd8064508 (diff) |
Back-ported RF100 V1, V2, and XL resources files from [dok-net RF100](https://github.com/dok-net/RF100) to Renkforce COTS stock firmware (temperature, flow rate; build volume on V1).
Diffstat (limited to 'resources/definitions/renkforce_rf100_v2.def.json')
-rw-r--r-- | resources/definitions/renkforce_rf100_v2.def.json | 234 |
1 files changed, 234 insertions, 0 deletions
diff --git a/resources/definitions/renkforce_rf100_v2.def.json b/resources/definitions/renkforce_rf100_v2.def.json new file mode 100644 index 0000000000..5467ff0ba8 --- /dev/null +++ b/resources/definitions/renkforce_rf100_v2.def.json @@ -0,0 +1,234 @@ +{ + "version": 2, + "name": "Renkforce RF100 V2", + "inherits": "fdmprinter", + "metadata": { + "author": "Simon Peter (based on RF100.ini by Conrad Electronic SE)", + "file_formats": "text/x-gcode", + "manufacturer": "Renkforce", + "visible": true, + "machine_extruder_trains": + { + "0": "renkforce_rf100_extruder_0" + } + }, + + "overrides": { + "adhesion_type": { + "default_value": "skirt" + }, + "bottom_thickness": { + "value": "0.6" + }, + "brim_width": { + "value": "3.0" + }, + "cool_fan_enabled": { + "value": "True" + }, + "cool_fan_full_at_height": { + "value": "0.5" + }, + "cool_fan_speed_max": { + "value": "100.0" + }, + "cool_fan_speed_min": { + "value": "100.0" + }, + "cool_lift_head": { + "value": "True" + }, + "cool_min_layer_time": { + "value": "5.0" + }, + "cool_min_speed": { + "value": "10.0" + }, + "infill_before_walls": { + "value": "True" + }, + "infill_line_width": { + "value": "0.6" + }, + "infill_overlap": { + "value": "15.0" + }, + "infill_sparse_density": { + "value": "26.0" + }, + "ironing_enabled": { + "value": "True" + }, + "layer_0_z_overlap": { + "value": "0.11" + }, + "layer_height_0": { + "value": "0.3" + }, + "machine_depth": { + "value": "120" + }, + "machine_end_gcode": { + "default_value": ";End GCode\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-2 F300 ;move Z up a bit and retract filament even more\nM104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG0 Z{machine_height} F1800 ;move the platform all the way down\nG28 X0 Y0 F1800 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning\nM117 Done" + }, + "machine_gcode_flavor": { + "default_value": "RepRap (Marlin/Sprinter)" + }, + "machine_head_with_fans_polygon": + { + "default_value": [ + [-26, -27], + [38, -27], + [38, 55], + [-26, 55] + ] + }, + "gantry_height": { + "value": "8" + }, + "machine_height": { + "value": "120" + }, + "machine_name": { + "default_value": "Renkforce RF100 V2" + }, + "machine_start_gcode": { + "default_value": ";Sliced at: {day} {date} {time}\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG1 Z5.0 F1800 ;move Z to 5mm\nG28 X0 Y0 F1800 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstop\nG92 E0 ;zero the extruded length\nG1 F200 E4.0 ;extrude 4.0mm of feed stock to build pressure\nG1 Z5.0 F300 ;move the platform down 5mm\nG92 E0 ;zero the extruded length again\nG1 F1800\n;Put printing message on LCD screen\nM117 Printing..." + }, + "machine_width": { + "value": "120" + }, + "material_bed_temperature": { + "enabled": false + }, + "material_flow": { + "value": "110" + }, + "material_print_temperature": { + "value": "210.0" + }, + "ooze_shield_enabled": { + "value": "True" + }, + "raft_airgap": { + "value": "0.33" + }, + "raft_base_line_spacing": { + "value": "3.0" + }, + "raft_base_line_width": { + "value": "1.0" + }, + "raft_base_thickness": { + "value": "0.3" + }, + "raft_interface_line_spacing": { + "value": "3.0" + }, + "raft_interface_line_width": { + "value": "0.4" + }, + "raft_interface_thickness": { + "value": "0.27" + }, + "raft_margin": { + "value": "6.0" + }, + "raft_speed": { + "value": "20.0" + }, + "raft_surface_layers": { + "value": "2" + }, + "raft_surface_line_spacing": { + "value": "0.4" + }, + "raft_surface_line_width": { + "value": "0.4" + }, + "raft_surface_thickness": { + "value": "0.1" + }, + "retraction_amount": { + "value": "3.0" + }, + "retraction_combing": { + "default_value": "all" + }, + "retraction_enable": { + "value": "True" + }, + "retraction_hop": { + "value": "1.0" + }, + "retraction_min_travel": { + "value": "1.5" + }, + "retraction_speed": { + "value": "40.0" + }, + "skin_overlap": { + "value": "15.0" + }, + "skirt_brim_minimal_length": { + "value": "150.0" + }, + "skirt_gap": { + "value": "3.0" + }, + "skirt_line_count": { + "value": "3" + }, + "speed_infill": { + "value": "50.0" + }, + "speed_layer_0": { + "value": "15.0" + }, + "speed_print": { + "value": "50.0" + }, + "speed_topbottom": { + "value": "30.0" + }, + "speed_travel": { + "value": "50.0" + }, + "speed_wall_0": { + "value": "25.0" + }, + "speed_wall_x": { + "value": "35.0" + }, + "support_angle": { + "value": "60.0" + }, + "support_enable": { + "value": "False" + }, + "support_infill_rate": { + "value": "15 if support_enable else 0 if support_tree_enable else 15" + }, + "support_line_width": { + "value": "0.6" + }, + "support_pattern": { + "default_value": "lines" + }, + "support_type": { + "default_value": "everywhere" + }, + "support_xy_distance": { + "value": "0.7" + }, + "support_z_distance": { + "value": "0.35" + }, + "top_bottom_thickness": { + "value": "0.8" + }, + "wall_thickness": { + "value": "0.8" + } + } +} |