Update Rigid3D Printer Profiles

1 files changed, 31 insertions, 108 deletions

diff --git a/resources/definitions/rigid3d_zero2.def.json b/resources/definitions/rigid3d_zero2.def.json
index cc922769f7..f49074490d 100644
--- a/resources/definitions/rigid3d_zero2.def.json
+++ b/resources/definitions/rigid3d_zero2.def.json
@@ -1,117 +1,40 @@
 {
     "name": "Rigid3D Zero2",
     "version": 2,
-    "inherits": "fdmprinter",
+    "inherits": "rigid3d_base",
     "metadata": {
-        "visible": true,
-        "author": "Rigid3D",
-        "manufacturer": "Rigid3D",
-        "has_materials": false,
-        "file_formats": "text/x-gcode",
-        "platform": "rigid3d_zero2_platform.stl",
-        "platform_offset": [ 5, 0, -35],
-        "machine_extruder_trains":
-        {
-            "0": "rigid3d_zero2_extruder_0"
-        }
+		"visible": true,
+		"quality_definition": "rigid3d_base",	
+		"preferred_quality_type": "standard",
+		"platform": "rigid3d_zero2_platform.stl"		
     },
     "overrides": {
         "machine_name": { "default_value": "Rigid3D Zero2" },
-        "machine_head_with_fans_polygon": { 
-            "default_value": [[ 30, 30], [ 30, 70], [ 30, 70], [ 30, 30]] 
-        },
-        "z_seam_type": {
-            "default_value": "random"
-        },
-        "machine_heated_bed": {
-            "default_value": true
-        },
-        "layer_height": {
-            "default_value": 0.2
-        },
-        "layer_height_0": {
-            "default_value": 0.2
-        },
-        "wall_thickness": {
-            "default_value": 0.8
-        },
-        "top_bottom_thickness": {
-            "default_value": 0.8
-        },
-        "xy_offset": {
-             "default_value": -0.2
-        },
-        "material_print_temperature": {
-            "value": 235
-        },
-        "speed_print": {
-            "default_value": 40
-        },
-        "speed_layer_0": {
-            "value": 15
-        },
-        "speed_travel": {
-            "value": 100
-        },
-        "support_enable": {
-            "default_value": false
-        },
-        "infill_sparse_density": {
-            "default_value": 15
-        },
-        "infill_pattern": {
-            "value": "'lines'"
-        },
-        "retraction_amount": {
-            "default_value": 1
-        },
-        "machine_width": {
-            "default_value": 200
-        },
-        "machine_height": {
-            "default_value": 200
-        },
-        "machine_depth": {
-            "default_value": 200
-        },
-        "machine_center_is_zero": {
-            "default_value": false
-        },
-        "gantry_height": {
-            "value": "25"
-        },
-        "machine_gcode_flavor": {
-            "default_value": "RepRap"
-        },
-        "cool_fan_enabled": {
-            "default_value": false
-        },
-        "cool_fan_speed": {
-            "value": 50
-        },
-        "cool_fan_full_at_height": {
-            "value": 1.0
-        },
-        "support_z_distance": {
-            "default_value": 0.2
-        },
-        "support_interface_enable": {
-            "default_value": true
-        },        
-        "support_interface_height": {
-            "default_value": 0.8
-        }, 
-        "support_interface_density": {
-            "default_value": 70
-        },        
-        "support_interface_pattern": {
-            "default_value": "grid"
-        },        
-        "machine_start_gcode": {
-            "default_value": "G21\nG28 ; Home extruder\nM420 S1 ; Enable MBL\nM107 ; Turn off fan\nG91 ; Relative positioning\nG1 Z5 F180;\nG1 X30 Y30 F3000;\nG1 Z-5 F180;\nG90 ; Absolute positioning\nM82 ; Extruder in absolute mode\nG92 E0 ; Reset extruder position\n"
-        },
-        "machine_end_gcode": {
-            "default_value": "G1 X0 Y180 ; Get extruder out of way.\nM107 ; Turn off fan\nG91 ; Relative positioning\nG0 Z20 ; Lift extruder up\nT0\nG1 E-1 ; Reduce filament pressure\nM104 T0 S0 ; Turn extruder heater off\nG90 ; Absolute positioning\nG92 E0 ; Reset extruder position\nM140 S0 ; Disable heated bed\nM84 ; Turn steppers off\n"
-        }
+
+		"machine_heated_bed": { "default_value": true },
+		
+		"machine_width": { "default_value": 200 },
+        "machine_depth": { "default_value": 200 },
+        "machine_height": { "default_value": 192 },
+		
+		"machine_center_is_zero": { "default_value": false },
+		
+		"machine_start_gcode": {"default_value": "G28 ; Home extruder\nM420 S1 ; Enable MBL\nM107 ; Turn off fan\nG90 ; Absolute positioning\nM82 ; Extruder in absolute mode\nG1 Z5.0 F300 ;Move Z Axis up\nG92 E0 ; Reset extruder position\nG1 X30.0 Y30.0 F3000 ;Move Z Axis up"},
+        "machine_end_gcode": {"default_value": "G1 X0 Y180 ; Get extruder out of way.\nM107 ; Turn off fan\nG91 ; Relative positioning\nG0 Z20 ; Lift extruder up\nT0\nG1 E-1 ; Reduce filament pressure\nM104 T0 S0 ; Turn extruder heater off\nG90 ; Absolute positioning\nG92 E0 ; Reset extruder position\nM140 S0 ; Disable heated bed\nM84 ; Turn steppers off\n"},
+		
+
+		
+        "machine_head_polygon": { 
+            "default_value": [
+                 [ -30, 65], [ -30, -30], [ 30, -30], [ 30, 65]
+				 ] 
+        },
+		"machine_head_with_fans_polygon": { 
+            "default_value": [
+                 [ -30, 65], [ -30, -30], [ 30, -30], [ 30, 65]
+				 ] 
+        },
+
+        "gantry_height": { "value": 25 }
     }
 }