diff options
| author | Ghostkeeper <rubend@tutanota.com> | 2017-05-31 10:22:49 +0300 |
|---|---|---|
| committer | Ghostkeeper <rubend@tutanota.com> | 2017-05-31 10:22:49 +0300 |
| commit | 5392b8f65cf114aa873e64626bae57c1af616fd9 (patch) | |
| tree | 2c8dfc63369d2e215cc0f55408b7530daf6c39cf /resources/definitions/rigidbot.def.json | |
| parent | 1a1266404b77d41df8df58794b04c615a5d11595 (diff) | |
Remove commented-out temperature commands from start g-code
Even though it was commented-out, it was still being detected and made Cura think that the start g-code was heating up the nozzles by itself. I've removed the lines so that the normal temperature commands get inserted by Cura automatically.
Diffstat (limited to 'resources/definitions/rigidbot.def.json')
| -rw-r--r-- | resources/definitions/rigidbot.def.json | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/resources/definitions/rigidbot.def.json b/resources/definitions/rigidbot.def.json index 9877b546b4..7d083bb6f5 100644 --- a/resources/definitions/rigidbot.def.json +++ b/resources/definitions/rigidbot.def.json @@ -39,7 +39,7 @@ "default_value": "RepRap (Marlin/Sprinter)" }, "machine_start_gcode": { - "default_value": ";Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {infill_sparse_density}\n;M190 S{material_bed_temperature} ;Uncomment to add your own bed temperature line\n;M109 S{material_print_temperature} ;Uncomment to add your own temperature line\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nM205 X8 ;X/Y Jerk settings\nG1 Z15.0 F{speed_travel} ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E7 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F{speed_travel}\n;Put printing message on LCD screen\nM117 Rigibot Printing..." + "default_value": ";Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {infill_sparse_density}\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nM205 X8 ;X/Y Jerk settings\nG1 Z15.0 F{speed_travel} ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E7 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F{speed_travel}\n;Put printing message on LCD screen\nM117 Rigibot Printing..." }, "machine_end_gcode": { "default_value": ";End GCode\nM104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+10 E-1 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nG1 Y230 F3000 ;move Y so the head is out of the way and Plate is moved forward\nM84 ;steppers off\nG90 ;absolute positioning" |