indentation_fix

1 files changed, 134 insertions, 133 deletions

diff --git a/resources/definitions/strateo3d.def.json b/resources/definitions/strateo3d.def.json
index 46c193569d..ed6da5f26f 100644
--- a/resources/definitions/strateo3d.def.json
+++ b/resources/definitions/strateo3d.def.json
@@ -1,136 +1,137 @@
 {
 	"version": 2,
-    "name": "Strateo3D",
-    "inherits": "fdmprinter",
-    "metadata": {
-        "author": "M.K",
-        "manufacturer": "eMotionTech",
-        "category": "Other",
-        "visible": true,
-		"file_formats": "text/x-gcode",
-        "has_machine_quality": true,
-        "has_materials": true,
-        "has_machine_materials": true,
-        "has_variants": true,
-		"preferred_variant_name": "Standard 0.6",
-        "preferred_quality_type": "e",
-        "variants_name": "Print Head",
-        "machine_extruder_trains":
-        {
-            "0": "strateo3d_right_extruder",
-            "1": "strateo3d_left_extruder"
-        }
+	"name": "Strateo3D",
+	"inherits": "fdmprinter",
+	"metadata":
+		{
+			"author": "M.K",
+			"manufacturer": "eMotionTech",
+			"category": "Other",
+			"visible": true,
+			"file_formats": "text/x-gcode",
+			"has_machine_quality": true,
+			"has_materials": true,
+			"has_machine_materials": true,
+			"has_variants": true,
+			"preferred_variant_name": "Standard 0.6",
+			"preferred_quality_type": "e",
+			"variants_name": "Print Head",
+			"machine_extruder_trains": 
+				{ 
+					"0": "strateo3d_right_extruder", 
+					"1": "strateo3d_left_extruder"
+				}
+		},
+		
+	"overrides": 
+		{
+			"machine_name": { "default_value": "Strateo3D" },
+			"machine_width": { "default_value": 600 },
+			"machine_depth": { "default_value": 420 },
+			"machine_height": { "default_value": 495 },
+			"machine_heated_bed": { "default_value": true },
+			"machine_center_is_zero": { "default_value": false },
+			"machine_head_with_fans_polygon": { "default_value": [ [ -76, -51.8 ] , [ 25, -51.8 ] , [ 25, 38.2 ] , [ -76, 38.2 ] ] },
+			"gantry_height": { "default_value": 40 },
+			"machine_extruder_count": { "default_value": 2 },
+			"machine_gcode_flavor": { "default_value": "Marlin" },
+			"machine_start_gcode": { "default_value": "G28 \nG90 G1 X300 Y210 Z15 F6000 \nG92 E0" },
+			"machine_end_gcode": { "default_value": "T1 \nM104 S0 \nT0 \nM104 S0 \nM140 S0 \nM141 S0 \nG91 \nG0 E-1 F1500 \nG0 z1 \nG90 \nG28 \nM801.2 \nM801.0 \nM84" },
+			"extruder_prime_pos_y": {"minimum_value": "0", "maximum_value": "machine_depth"},
+			"extruder_prime_pos_x": {"minimum_value": "0", "maximum_value": "machine_width"},
+			"machine_heat_zone_length": { "default_value": 7 },
+			"default_material_print_temperature": { "maximum_value_warning": "350" },
+			"material_print_temperature": { "maximum_value_warning": "350" },
+			"material_print_temperature_layer_0": { "maximum_value_warning": "350" },
+			"material_bed_temperature": { "maximum_value": "130" },
+			"material_bed_temperature_layer_0": { "maximum_value": "130" },
+			"extruder_prime_pos_abs": { "default_value": true },
+			"machine_acceleration": { "default_value": 2000 },
 
-    },
-
-   "overrides": {
-        "machine_name": { "default_value": "Strateo3D" },
-		"machine_width": { "default_value": 600 },
-        "machine_depth": { "default_value": 420 },
-        "machine_height": { "default_value": 495 },
-        "machine_heated_bed": { "default_value": true },
-		"machine_center_is_zero": { "default_value": false },
-		"machine_head_with_fans_polygon": { "default_value": [ [ -76, -51.8 ] , [ 25, -51.8 ] , [ 25, 38.2 ] , [ -76, 38.2 ] ] },
-		"gantry_height": { "default_value": 40 },
-		"machine_extruder_count": { "default_value": 2 },
-		"machine_gcode_flavor": { "default_value": "Marlin" },
-		"machine_start_gcode": { "default_value": "G28 \nG90 G1 X300 Y210 Z15 F6000 \nG92 E0" },
-        "machine_end_gcode": { "default_value": "T1 \nM104 S0 \nT0 \nM104 S0 \nM140 S0 \nM141 S0 \nG91 \nG0 E-1 F1500 \nG0 z1 \nG90 \nG28 \nM801.2 \nM801.0 \nM84" },
-		"extruder_prime_pos_y": {"minimum_value": "0", "maximum_value": "machine_depth"},
-        "extruder_prime_pos_x": {"minimum_value": "0", "maximum_value": "machine_width"}, 
-		"machine_heat_zone_length": { "default_value": 7 },
-		"default_material_print_temperature": { "maximum_value_warning": "350" },
-		"material_print_temperature": { "maximum_value_warning": "350" },  
-		"material_print_temperature_layer_0": { "maximum_value_warning": "350" },
-		"material_bed_temperature": { "maximum_value": "130" },
-        "material_bed_temperature_layer_0": { "maximum_value": "130" },
-        "extruder_prime_pos_abs": { "default_value": true },
-		"machine_acceleration": { "default_value": 2000 },
-
-		"acceleration_enabled": { "value": false },
-        "acceleration_layer_0": { "value": "acceleration_topbottom" },
-        "acceleration_prime_tower": { "value": "math.ceil(acceleration_print * 1000 / 2000)" },
-        "acceleration_print": { "value": "2000" },
-        "acceleration_support": { "value": "acceleration_print" },
-        "acceleration_support_interface": { "value": "acceleration_topbottom" },
-        "acceleration_topbottom": { "value": "math.ceil(acceleration_print * 1000 / 2000)" },
-        "acceleration_wall": { "value": "math.ceil(acceleration_print * 1500 / 2000)" },
-        "acceleration_wall_0": { "value": "math.ceil(acceleration_wall * 1000 / 1500)" },
-		"adaptive_layer_height_variation": { "default_value": 0.1 },
-        "adaptive_layer_height_variation_step": { "default_value": 0.05 },
-		"adhesion_type": { "default_value": "skirt" },
-		"expand_skins_expand_distance": { "value": "wall_line_width_0 + wall_line_count * wall_line_width_x" },
-		"gradual_infill_step_height": { "value": "layer_height*10" },
-		"gradual_support_infill_step_height": { "value": "layer_height*7" },
-		"infill_before_walls": { "default_value": false },
-		"infill_overlap": { "value": "0" },
-		"infill_wipe_dist": { "value": "0" },
-		"jerk_enabled": { "value": "False" },
-        "jerk_layer_0": { "value": "jerk_topbottom" },
-        "jerk_prime_tower": { "value": "math.ceil(jerk_print * 15 / 25)" },
-        "jerk_print": { "value": "25" },
-        "jerk_support": { "value": "math.ceil(jerk_print * 15 / 25)" },
-        "jerk_support_interface": { "value": "jerk_topbottom" },
-        "jerk_topbottom": { "value": "math.ceil(jerk_print * 5 / 25)" },
-        "jerk_wall": { "value": "math.ceil(jerk_print * 10 / 25)" },
-        "jerk_wall_0": { "value": "math.ceil(jerk_wall * 5 / 10)" },
-		"layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" },
-        "layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" },
-		"machine_min_cool_heat_time_window": { "value": "15" },
-		"machine_nozzle_cool_down_speed": { "default_value": 0.50 },
-		"machine_nozzle_heat_up_speed": { "default_value": 2.25 },
-		"material_final_print_temperature": { "value": "material_print_temperature - 10" },
-		"material_flow": { "default_value": 93 },
-		"material_flow_layer_0": { "value": "math.ceil(material_flow*1)" },
-		"material_initial_print_temperature": { "value": "material_print_temperature - 5" },
-		"meshfix_maximum_resolution": { "value": "0.03" },
-		"optimize_wall_printing_order": { "value": "True" },
-		"prime_blob_enable": { "enabled": false, "default_value": false },
-		"prime_tower_min_volume": { "default_value": 35 },
-		"prime_tower_position_x": { "value": "machine_width/2 - max(extruderValue(adhesion_extruder_nr, 'brim_width') * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 if adhesion_type == 'brim' else (extruderValue(adhesion_extruder_nr, 'raft_margin') if adhesion_type == 'raft' else (extruderValue(adhesion_extruder_nr, 'skirt_gap') if adhesion_type == 'skirt' else 0)), max(extruderValues('travel_avoid_distance'))) - max(extruderValues('support_offset')) - sum(extruderValues('skirt_brim_line_width')) * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 - (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0) - 1" },
-        "prime_tower_position_y": { "value": "machine_depth - prime_tower_size - max(extruderValue(adhesion_extruder_nr, 'brim_width') * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 if adhesion_type == 'brim' else (extruderValue(adhesion_extruder_nr, 'raft_margin') if adhesion_type == 'raft' else (extruderValue(adhesion_extruder_nr, 'skirt_gap') if adhesion_type == 'skirt' else 0)), max(extruderValues('travel_avoid_distance'))) - max(extruderValues('support_offset')) - sum(extruderValues('skirt_brim_line_width')) * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 - (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0) - 1" },
-		"retraction_amount": { "default_value": 1.5 },
-		"retraction_combing": { "default_value": "all" },
-		"retraction_combing_max_distance": { "default_value": 5 },
-		"retraction_count_max": { "default_value": 15 },
-		"retraction_hop": { "value": "2" },
-        "retraction_hop_enabled": { "value": "extruders_enabled_count > 1"  },
-        "retraction_hop_only_when_collides": { "value": "True" },
-        "retraction_min_travel": { "value": "3*line_width" },
-        "retraction_prime_speed": { "value": "retraction_speed-10" },
-		"retraction_speed": { "default_value": 25 }, 
-		"skin_overlap": { "value": "10" },
-		"skirt_brim_minimal_length": { "default_value": 333 },
-		"speed_layer_0": { "value": "20" },
-		"speed_travel_layer_0": { "value": "100" },
-        "speed_prime_tower": { "value": "speed_topbottom" },
-        "speed_print": { "value": "50" },
-        "speed_support": { "value": "speed_wall" },
-        "speed_support_interface": { "value": "speed_topbottom" },
-        "speed_topbottom": { "value": "math.ceil(speed_print * 20/35)" },
-        "speed_travel": { "value": "150" },
-        "speed_wall": { "value": "math.ceil(speed_print * 3/4)" },
-        "speed_wall_0": { "value": "math.ceil(speed_wall * 2/3)" },
-        "speed_wall_x": { "value": "speed_wall" },
-		"support_angle": { "value": "50" },
-		"support_bottom_distance": {"value": "extruderValue(support_bottom_extruder_nr if support_bottom_enable else support_infill_extruder_nr, 'support_z_distance/2') if support_type == 'everywhere' else 0", "maximum_value_warning": "machine_nozzle_size*1.5" },
-		"support_interface_enable": { "default_value": true },
-		"support_interface_height": { "value": "layer_height*3" },
-		"support_interface_offset": { "value": "support_offset" },
-		"support_top_distance": {"value": "extruderValue(support_roof_extruder_nr if support_roof_enable else support_infill_extruder_nr, 'support_z_distance')", "maximum_value_warning": "machine_nozzle_size*1.5" },
-		"support_use_towers": { "default_value": true },
-		"support_xy_distance": { "value": "line_width * 1.7" },
-		"support_xy_distance_overhang": { "value": "wall_line_width_0" },
-		"support_z_distance": { "value": "layer_height*2", "maximum_value_warning": "machine_nozzle_size*1.5" },
-		"switch_extruder_prime_speed": { "value": "retraction_prime_speed" },
-		"switch_extruder_retraction_amount": { "value": "7" },
-		"switch_extruder_retraction_speeds": {"value": "retraction_retract_speed"},
-		"top_bottom_thickness": { "value": "3*layer_height", "minimum_value_warning": "layer_height*2" },
-		"top_thickness": { "value": "top_bottom_thickness" },
-		"top_layers": { "value": "0 if infill_sparse_density == 100 else math.ceil(round(top_thickness / resolveOrValue('layer_height'), 4))"},
-		"bottom_thickness": { "value": "top_bottom_thickness-2*layer_height+layer_height_0" },
-		"bottom_layers": { "value": "999999 if infill_sparse_density == 100 else math.ceil(round(((bottom_thickness-resolveOrValue('layer_height_0')) / resolveOrValue('layer_height'))+1, 4))"},
-		"travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" },
-		"wall_thickness": { "value": "wall_line_width_0 + wall_line_width_x" }
-    }
-}
\ No newline at end of file
+			"acceleration_enabled": { "value": false },
+			"acceleration_layer_0": { "value": "acceleration_topbottom" },
+			"acceleration_prime_tower": { "value": "math.ceil(acceleration_print * 1000 / 2000)" },
+			"acceleration_print": { "value": "2000" },
+			"acceleration_support": { "value": "acceleration_print" },
+			"acceleration_support_interface": { "value": "acceleration_topbottom" },
+			"acceleration_topbottom": { "value": "math.ceil(acceleration_print * 1000 / 2000)" },
+			"acceleration_wall": { "value": "math.ceil(acceleration_print * 1500 / 2000)" },
+			"acceleration_wall_0": { "value": "math.ceil(acceleration_wall * 1000 / 1500)" },
+			"adaptive_layer_height_variation": { "default_value": 0.1 },
+			"adaptive_layer_height_variation_step": { "default_value": 0.05 },
+			"adhesion_type": { "default_value": "skirt" },
+			"expand_skins_expand_distance": { "value": "wall_line_width_0 + wall_line_count * wall_line_width_x" },
+			"gradual_infill_step_height": { "value": "layer_height*10" },
+			"gradual_support_infill_step_height": { "value": "layer_height*7" },
+			"infill_before_walls": { "default_value": false },
+			"infill_overlap": { "value": "0" },
+			"infill_wipe_dist": { "value": "0" },
+			"jerk_enabled": { "value": "False" },
+			"jerk_layer_0": { "value": "jerk_topbottom" },
+			"jerk_prime_tower": { "value": "math.ceil(jerk_print * 15 / 25)" },
+			"jerk_print": { "value": "25" },
+			"jerk_support": { "value": "math.ceil(jerk_print * 15 / 25)" },
+			"jerk_support_interface": { "value": "jerk_topbottom" },
+			"jerk_topbottom": { "value": "math.ceil(jerk_print * 5 / 25)" },
+			"jerk_wall": { "value": "math.ceil(jerk_print * 10 / 25)" },
+			"jerk_wall_0": { "value": "math.ceil(jerk_wall * 5 / 10)" },
+			"layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" },
+			"layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" },
+			"machine_min_cool_heat_time_window": { "value": "15" },
+			"machine_nozzle_cool_down_speed": { "default_value": 0.50 },
+			"machine_nozzle_heat_up_speed": { "default_value": 2.25 },
+			"material_final_print_temperature": { "value": "material_print_temperature - 10" },
+			"material_flow": { "default_value": 93 },
+			"material_flow_layer_0": { "value": "math.ceil(material_flow*1)" },
+			"material_initial_print_temperature": { "value": "material_print_temperature - 5" },
+			"meshfix_maximum_resolution": { "value": "0.03" },
+			"optimize_wall_printing_order": { "value": "True" },
+			"prime_blob_enable": { "enabled": false, "default_value": false },
+			"prime_tower_min_volume": { "default_value": 35 },
+			"prime_tower_position_x": { "value": "machine_width/2 - max(extruderValue(adhesion_extruder_nr, 'brim_width') * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 if adhesion_type == 'brim' else (extruderValue(adhesion_extruder_nr, 'raft_margin') if adhesion_type == 'raft' else (extruderValue(adhesion_extruder_nr, 'skirt_gap') if adhesion_type == 'skirt' else 0)), max(extruderValues('travel_avoid_distance'))) - max(extruderValues('support_offset')) - sum(extruderValues('skirt_brim_line_width')) * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 - (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0) - 1" },
+			"prime_tower_position_y": { "value": "machine_depth - prime_tower_size - max(extruderValue(adhesion_extruder_nr, 'brim_width') * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 if adhesion_type == 'brim' else (extruderValue(adhesion_extruder_nr, 'raft_margin') if adhesion_type == 'raft' else (extruderValue(adhesion_extruder_nr, 'skirt_gap') if adhesion_type == 'skirt' else 0)), max(extruderValues('travel_avoid_distance'))) - max(extruderValues('support_offset')) - sum(extruderValues('skirt_brim_line_width')) * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 - (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0) - 1" },
+			"retraction_amount": { "default_value": 1.5 },
+			"retraction_combing": { "default_value": "all" },
+			"retraction_combing_max_distance": { "default_value": 5 },
+			"retraction_count_max": { "default_value": 15 },
+			"retraction_hop": { "value": "2" },
+			"retraction_hop_enabled": { "value": "extruders_enabled_count > 1"  },
+			"retraction_hop_only_when_collides": { "value": "True" },
+			"retraction_min_travel": { "value": "3*line_width" },
+			"retraction_prime_speed": { "value": "retraction_speed-10" },
+			"retraction_speed": { "default_value": 25 },
+			"skin_overlap": { "value": "10" },
+			"skirt_brim_minimal_length": { "default_value": 333 },
+			"speed_layer_0": { "value": "20" },
+			"speed_travel_layer_0": { "value": "100" },
+			"speed_prime_tower": { "value": "speed_topbottom" },
+			"speed_print": { "value": "50" },
+			"speed_support": { "value": "speed_wall" },
+			"speed_support_interface": { "value": "speed_topbottom" },
+			"speed_topbottom": { "value": "math.ceil(speed_print * 20/35)" },
+			"speed_travel": { "value": "150" },
+			"speed_wall": { "value": "math.ceil(speed_print * 3/4)" },
+			"speed_wall_0": { "value": "math.ceil(speed_wall * 2/3)" },
+			"speed_wall_x": { "value": "speed_wall" },
+			"support_angle": { "value": "50" },
+			"support_bottom_distance": {"value": "extruderValue(support_bottom_extruder_nr if support_bottom_enable else support_infill_extruder_nr, 'support_z_distance/2') if support_type == 'everywhere' else 0", "maximum_value_warning": "machine_nozzle_size*1.5" },
+			"support_interface_enable": { "default_value": true },
+			"support_interface_height": { "value": "layer_height*3" },
+			"support_interface_offset": { "value": "support_offset" },
+			"support_top_distance": {"value": "extruderValue(support_roof_extruder_nr if support_roof_enable else support_infill_extruder_nr, 'support_z_distance')", "maximum_value_warning": "machine_nozzle_size*1.5" },
+			"support_use_towers": { "default_value": true },
+			"support_xy_distance": { "value": "line_width * 1.7" },
+			"support_xy_distance_overhang": { "value": "wall_line_width_0" },
+			"support_z_distance": { "value": "layer_height*2", "maximum_value_warning": "machine_nozzle_size*1.5" },
+			"switch_extruder_prime_speed": { "value": "retraction_prime_speed" },
+			"switch_extruder_retraction_amount": { "value": "7" },
+			"switch_extruder_retraction_speeds": {"value": "retraction_retract_speed"},
+			"top_bottom_thickness": { "value": "3*layer_height", "minimum_value_warning": "layer_height*2" },
+			"top_thickness": { "value": "top_bottom_thickness" },
+			"top_layers": { "value": "0 if infill_sparse_density == 100 else math.ceil(round(top_thickness / resolveOrValue('layer_height'), 4))"},
+			"bottom_thickness": { "value": "top_bottom_thickness-2*layer_height+layer_height_0" },
+			"bottom_layers": { "value": "999999 if infill_sparse_density == 100 else math.ceil(round(((bottom_thickness-resolveOrValue('layer_height_0')) / resolveOrValue('layer_height'))+1, 4))"},
+			"travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" },
+			"wall_thickness": { "value": "wall_line_width_0 + wall_line_width_x" }
+		}
+	}
\ No newline at end of file