diff options
author | Remco Burema <41987080+rburema@users.noreply.github.com> | 2021-06-08 17:52:46 +0300 |
---|---|---|
committer | GitHub <noreply@github.com> | 2021-06-08 17:52:46 +0300 |
commit | 54478758df5121a4516e0f206765e2d5b9ada695 (patch) | |
tree | 0bd5f502e1153c5823d6d4d3f2415295b39830b0 /resources/definitions/syndaveraxi2.def.json | |
parent | 9d951fbe105e7ceebc3ba19b8bf07386cb700913 (diff) | |
parent | 84d04a4d6d384653b6c63444c4899b5c3e8d6a15 (diff) |
Merge pull request #9775 from SynDaverCO/SynDaverStartGcodeCorrection
edit start gcode
Diffstat (limited to 'resources/definitions/syndaveraxi2.def.json')
-rw-r--r-- | resources/definitions/syndaveraxi2.def.json | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/resources/definitions/syndaveraxi2.def.json b/resources/definitions/syndaveraxi2.def.json index b42ed9f1f5..77a208920b 100644 --- a/resources/definitions/syndaveraxi2.def.json +++ b/resources/definitions/syndaveraxi2.def.json @@ -37,7 +37,7 @@ "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" }, "machine_start_gcode": { - "default_value": ";This G-Code has been generated specifically for Syndaver AXI 2 with Hemera toolhead\nM73 P0 ; clear LCD progress bar\nM75 ; Start LCD Print Timer\nM107 ; disable fans\nM420 S0 ; disable leveling matrix\nM82 ; set extruder to absolute mode\nG92 E0 ; set extruder position to 0\nM140 S{material_bed_temperature_layer_0} ; start bed heating up\nM104 S170 ; start nozzle heating up\nG28 ; home all axes\nM117 AXI Heating Up...\nG1 X-17.5 Y100 Z10 F3000 ; move to wipe position\nG29 L1 ; load leveling matrix slot 1\nG29 A ; ensure mesh is enabled\nM109 R170 ; wait for nozzle to reach wiping temp\nG1 E-3 ; retract material before wipe\nM117 AXI Wiping Nozzle...\nG1 Z-3 ; lower nozzle\nG1 Y90 F1000 ; slow wipe\nG1 Y65 F1000 ; slow wipe\nG1 Y80 F1000 ; slow wipe\nG1 Y65 F1000 ; slow wipe\nG1 Y55 F1000 ; slow wipe\nG1 Y30 F3000 ; fast wipe\nG1 Y55 F3000 ; fast wipe\nG1 Y30 F3000 ; fast wipe\nG1 Y55 F3000 ; fast wipe\nG1 Z10 ; raise nozzle\nM117 Heating...\nM190 R{material_bed_temperature_layer_0} ; wait for bed to reach printing temp\nM104 S{material_print_temperature_layer_0} ; set extruder to reach initial printing temp, held back for ooze reasons\nM117 Probe Z at Temp\nG28 Z ; re-probe Z0 to account for any thermal expansion in the bed\nG1 X-17.5 Y80 Z10 F3000 ; move back to wiper\nM117 Heating...\nM109 R{material_print_temperature_layer_0} ; wait for extruder to reach initial printing temp\nM117 AXI Wiping Nozzle...\nG1 E0 ; prime material in nozzle\nG1 Z-3 ; final ooze wipe\nG1 Y60 F2000 ; final ooze wipe\nG1 Y20 F2000 ; final ooze wipe\nM117 AXI Starting Print\nG1 Z2 ; move nozzle back up to not run into things on print start\nM400 ; wait for moves to finish\nM117 AXI Printing" + "default_value": ";This G-Code has been generated specifically for Syndaver AXI 2 with Hemera toolhead\nM73 P0 ; clear LCD progress bar\nM75 ; Start LCD Print Timer\nM107 ; disable fans\nM420 S0 ; disable leveling matrix\nM82 ; set extruder to absolute mode\nG92 E0 ; set extruder position to 0\nM140 S{material_bed_temperature_layer_0} ; start bed heating up\nM104 S170 ; start nozzle heating up\nG28 ; home all axes\nM117 AXI Heating Up...\nG1 X-17.5 Y100 F3000 ; move to wiper pad\nG1 Z10 F5000 ; move to wiper pad\nG29 L1 ; load leveling matrix slot 1\nG29 A ; ensure mesh is enabled\nM109 R170 ; wait for nozzle to reach wiping temp\nG1 E-3 ; retract material before wipe\nM117 AXI Wiping Nozzle...\nG1 Z-3 ; lower nozzle\nG1 Y90 F1000 ; slow wipe\nG1 Y65 F1000 ; slow wipe\nG1 Y80 F1000 ; slow wipe\nG1 Y65 F1000 ; slow wipe\nG1 Y55 F1000 ; slow wipe\nG1 Y30 F3000 ; fast wipe\nG1 Y55 F3000 ; fast wipe\nG1 Y30 F3000 ; fast wipe\nG1 Y55 F3000 ; fast wipe\nG1 Z10 ; raise nozzle\nM117 Heating...\nM190 R{material_bed_temperature_layer_0} ; wait for bed to reach printing temp\nM104 S{material_print_temperature_layer_0} ; set extruder to reach initial printing temp, held back for ooze reasons\nM117 Probe Z at Temp\nG28 Z ; re-probe Z0 to account for any thermal expansion in the bed\nG1 X-17.5 Y80 F3000 ; move to wiper pad\nG1 Z10 F5000 ; move to wiper pad\nM117 Heating...\nM109 R{material_print_temperature_layer_0} ; wait for extruder to reach initial printing temp\nM117 AXI Wiping Nozzle...\nG1 E0 ; prime material in nozzle\nG1 Z-3 ; final ooze wipe\nG1 Y60 F2000 ; final ooze wipe\nG1 Y20 F2000 ; final ooze wipe\nM117 AXI Starting Print\nG1 Z2 ; move nozzle back up to not run into things on print start\nM400 ; wait for moves to finish\nM117 AXI Printing" }, "machine_end_gcode": { "default_value": "M400 ; wait for moves to finish\nM140 S50 ; start bed cooling\nM104 S0 ; disable hotend\nM107 ; disable fans\nM117 Cooling please wait\nG91 ; relative positioning\nG1 Z5 F3000 ; move Z up 5mm so it wont drag on the print\nG90 ; absolute positioning\nG1 X5 Y5 F3000 ; move to cooling position\nM190 R50 ; wait for bed to cool down to removal temp\nG1 X145 Y260 F1000 ; present finished print\nM140 S0 ; cool down bed\nM77 ; End LCD Print Timer\nM18 X Y E ; turn off x y and e axis\nM117 Print Complete." |