diff options
| author | Reiner Buehl <reiner@buehl.net> | 2020-10-30 17:12:59 +0300 |
|---|---|---|
| committer | GitHub <noreply@github.com> | 2020-10-30 17:12:59 +0300 |
| commit | 7e675945be024dd781a8858a0accfc648698ca75 (patch) | |
| tree | f1c7181464f51f92b54f12d9eadee314c396ee7d /resources/definitions/tinyboy_fabrikator15.def.json | |
| parent | fcec1f1abda7dd650d845f190b287d29b386a2ad (diff) | |
Update resources/definitions/tinyboy_fabrikator15.def.json
Change fill_density to new name
Co-authored-by: Konstantinos Karmas <konskarm@gmail.com>
Diffstat (limited to 'resources/definitions/tinyboy_fabrikator15.def.json')
| -rw-r--r-- | resources/definitions/tinyboy_fabrikator15.def.json | 3 |
1 files changed, 2 insertions, 1 deletions
diff --git a/resources/definitions/tinyboy_fabrikator15.def.json b/resources/definitions/tinyboy_fabrikator15.def.json index c25fb7ad4a..6675e4a423 100644 --- a/resources/definitions/tinyboy_fabrikator15.def.json +++ b/resources/definitions/tinyboy_fabrikator15.def.json @@ -33,7 +33,8 @@ "gantry_height": { "value": 45 },
"machine_center_is_zero": { "default_value": false },
"machine_start_gcode": {
- "default_value": ";Sliced at: {day} {date} {time}\n;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}\n;Print time: {print_time}\n;Filament used: {filament_amount}m {filament_weight}g\n;Filament cost: {filament_cost}\n;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line\n;M109 S{print_temperature} ;Uncomment to add your own temperature line\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 X0.0 Y0.0 Z15.0 F{travel_speed} ;move the printhead up 15mm\nG92 E0 ;zero the extruded length\n;M109 S{print_temperature} ;set extruder temperature\nG1 F200 E30 ;extrude 30mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F{travel_speed}\n;Put printing message on LCD screen\nM117 Printing..."
+ "default_value": ";Sliced at: {day} {date} {time}\n;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {infill_sparse_density}\n;Print time: {print_time}\n;Filament used: {filament_amount}m {filament_weight}g\n;Filament cost: {filament_cost}\n;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line\n;M109 S{print_temperature} ;Uncomment to add your own temperature line\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 X0.0 Y0.0 Z15.0 F{travel_speed} ;move the printhead up 15mm\nG92 E0 ;zero the extruded length\n;M109 S{print_temperature} ;set extruder temperature\nG1 F200 E30 ;extrude 30mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F{travel_speed}\n;Put printing message on LCD screen\nM117 Printing..."
+
},
"machine_end_gcode": {
"default_value": ";End GCode\nM104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning\n;{profile_string}"
|