diff options
| author | Ghostkeeper <rubend@tutanota.com> | 2020-09-15 12:58:00 +0300 |
|---|---|---|
| committer | Ghostkeeper <rubend@tutanota.com> | 2020-09-15 12:58:00 +0300 |
| commit | 10f8c381e15e9bd46ebcd5ab8caf001ea92c46be (patch) | |
| tree | 72dc1c6819f54df462b18207700fa0ed195142d9 /resources/definitions/tronxy_x5sa_400.def.json | |
| parent | 548e6e19e50d4605a53fa8f9b6061a55e7e329ab (diff) | |
Use initial layer settings during start g-code
Fixes #8364.
Diffstat (limited to 'resources/definitions/tronxy_x5sa_400.def.json')
| -rw-r--r-- | resources/definitions/tronxy_x5sa_400.def.json | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/resources/definitions/tronxy_x5sa_400.def.json b/resources/definitions/tronxy_x5sa_400.def.json index 26c64807c6..5604b17619 100644 --- a/resources/definitions/tronxy_x5sa_400.def.json +++ b/resources/definitions/tronxy_x5sa_400.def.json @@ -22,7 +22,7 @@ }, "gantry_height": { "value": 40 }, - "machine_start_gcode": { "default_value": "; X5SA Start Code\nG21\nG90\nM82\nM107 T0\nM140 S{material_bed_temperature}\nM104 S{material_print_temperature} T0\nM190 S{material_bed_temperature}\nM109 S{material_print_temperature} T0\nG28\nG92 E0\nG1 Z2.0 F3000 ; Move Z Axis up little to preventscratching of Heat Bed\nG1 X1 Y20 Z0.3 F3600.0 ; Move to start position\nG1 X1 Y370.0 Z0.3 F1500.0 E25 ; Draw the first line\nG1 X1.6 Y370.0 Z0.3 F3600.0 ; Move to side a little\nG1 X1.6 Y20 Z0.3 F1500.0 E50 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.3 F3600.0 ; Move over to prevent blob squish"}, + "machine_start_gcode": { "default_value": "; X5SA Start Code\nG21\nG90\nM82\nM107 T0\nM140 S{material_bed_temperature_layer_0}\nM104 S{material_print_temperature_layer_0} T0\nM190 S{material_bed_temperature_layer_0}\nM109 S{material_print_temperature_layer_0} T0\nG28\nG92 E0\nG1 Z2.0 F3000 ; Move Z Axis up little to preventscratching of Heat Bed\nG1 X1 Y20 Z0.3 F3600.0 ; Move to start position\nG1 X1 Y370.0 Z0.3 F1500.0 E25 ; Draw the first line\nG1 X1.6 Y370.0 Z0.3 F3600.0 ; Move to side a little\nG1 X1.6 Y20 Z0.3 F1500.0 E50 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.3 F3600.0 ; Move over to prevent blob squish"}, "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 \nG1 E-2 Z0.2 F2400 \nG1 X5 Y5 F3000\nG1 Z10\nG90\n\nG1 X0 Y0 \nM106 S0\nM104 S0\nM140 S0\n\nM84 X Y E \n" }, "machine_max_feedrate_x": { "value": 100 }, |