diff options
author | 64bittuning <47930605+64bittuning@users.noreply.github.com> | 2022-01-28 23:27:13 +0300 |
---|---|---|
committer | 64bittuning <47930605+64bittuning@users.noreply.github.com> | 2022-01-28 23:27:13 +0300 |
commit | 66513096694bbbb001ac8967874cc3cd162ef5cc (patch) | |
tree | ff0b2b387398978f795341bbf8d9338ab55cfb11 /resources/definitions/tronxy_xy2pro.def.json | |
parent | 1e67650f7792b115d3bffd382afa4e17639e3a70 (diff) |
Resetting all files
Going to open a bug report if these fail.
Diffstat (limited to 'resources/definitions/tronxy_xy2pro.def.json')
-rw-r--r-- | resources/definitions/tronxy_xy2pro.def.json | 23 |
1 files changed, 18 insertions, 5 deletions
diff --git a/resources/definitions/tronxy_xy2pro.def.json b/resources/definitions/tronxy_xy2pro.def.json index fb2bd70ea3..59e727bbb0 100644 --- a/resources/definitions/tronxy_xy2pro.def.json +++ b/resources/definitions/tronxy_xy2pro.def.json @@ -1,10 +1,11 @@ { - "name": "Tronxy XY-2 Pro/Pro 2E/XY3 SE", + "name": "Tronxy XY-2 Pro", "version": 2, "inherits": "tronxy_x", "metadata": { "quality_definition": "tronxy_x", "visible": true, + "author": "AdderMk2", "platform": "tronxy.stl" }, "overrides": { @@ -20,11 +21,23 @@ ] }, "gantry_height": { "value": 40 }, - "retraction_amount": { "value": 4.5 }, - "machine_start_gcode": { "default_value": "; XY-2 Start Code\nG21 ; Set units to millimeters\nG90 ; Set all axis to Absolute\nM82 ; Set extrusion to Absolute\nM107 ; Disable all fans\nM190 S{material_bed_temperature_layer_0} ; Set bed temperature and wait\nG28 ; Home all axis\n; Uncomment the line below to enable ABL Mesh probing\n;G29 ; Probe bed mesh for ABL\n; For best results do not run nozzle heater while performing ABL\nG1 Z5.0 ; Raise nozzle to prevent scratching of heat bed\nG1 X0 Y0 ; Move nozzle to Home before heating\nM109 S{material_print_temperature_layer_0} T0 ; Set nozzle temp and wait\nG92 E0 ; Set Extruder position to zero\n; Uncomment the following lines to enable nozzle purge line along left edge of bed\n;G1 Z2.0 F3000 ; Raise Z axis\n;G1 X1.1 Y20 Z0.2 F3600.0 ; Move to purge line start position\n;G1 Y220 F1500.0 E10 ; Draw first purge line\n;G1 X1.4 F3600.0 ; Move to side\n;G1 Y20 F1500.0 E20 ; Draw second purge line\n;G92 E0 ; Reset Extruder\n;G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\n;G1 X5 Y20 Z0.2 F3600.0 ; Move over to finish nozzle wipe\n;G92 E0\n"}, - "machine_end_gcode": { "default_value": "M83 ; Set extrder to Relative\nG1 E-5 F3000 ; Retract 5mm of filament at 50mm/s\nG90 ; Set all axis to Absolute \nG1 X0 Y{machine_depth} ; Park print head\nG1 Z10 ; Move up 10mm\nM106 S0 ; Set fan speed to 0\nM104 S0 ; Set bed temp to 0\nM140 S0 ; Set Nozzle temp to 0\nM84 ; Disable all stepper motors\n" }, + "machine_start_gcode": { "default_value": "; XY-2 Start Code\nG21\nG90\nM82\nM107 T0\nM140 S{material_bed_temperature_layer_0}\nM104 S{material_print_temperature_layer_0} T0\nM190 S{material_bed_temperature_layer_0}\nM109 S{material_print_temperature_layer_0} T0\nG28\nG92 E0\n"}, + "machine_end_gcode": { "default_value": "G91\nG1 E-2 F3000\nG1 E-2 Z0.2 F1200\nG1 X5 Y5 F3600\nG1 Z10\nG90\nG1 X0 Y{machine_depth}\nM106 S0\nM104 S0\nM140 S0\n\nM84 X Y E\n" }, - "machine_acceleration": { "value": 150 } + "machine_max_feedrate_x": { "value": 100 }, + "machine_max_feedrate_y": { "value": 100 }, + "machine_max_feedrate_z": { "value": 20 }, + "machine_max_feedrate_e": { "value": 120 }, + + "machine_max_acceleration_x": { "value": 120 }, + "machine_max_acceleration_y": { "value": 120 }, + "machine_max_acceleration_z": { "value": 120 }, + "machine_max_acceleration_e": { "value": 120 }, + "machine_acceleration": { "value": 150 }, + + "machine_max_jerk_xy": { "value": 20 }, + "machine_max_jerk_z": { "value": 0.4 }, + "machine_max_jerk_e": { "value": 5 } } } |