diff options
| author | Ghostkeeper <rubend@tutanota.com> | 2017-03-01 11:48:53 +0300 |
|---|---|---|
| committer | Ghostkeeper <rubend@tutanota.com> | 2017-03-01 11:48:53 +0300 |
| commit | 82b2bc13e2be815dcf82d5f48defbb4b52a4fa45 (patch) | |
| tree | 6a6c7ecff1f6cc781cde7047a8d9b137333af84c /resources/definitions/ultimaker_original.def.json | |
| parent | 9ea7681ba033a1398007194124b1a01a165de6f9 (diff) | |
Don't cool bed if there is no heated bed
Makes the line a bit unusable, but it was already unusable, really.
Contributes to issue CURA-3405.
Diffstat (limited to 'resources/definitions/ultimaker_original.def.json')
| -rw-r--r-- | resources/definitions/ultimaker_original.def.json | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/resources/definitions/ultimaker_original.def.json b/resources/definitions/ultimaker_original.def.json index 03b3b50a08..bb73622413 100644 --- a/resources/definitions/ultimaker_original.def.json +++ b/resources/definitions/ultimaker_original.def.json @@ -62,7 +62,7 @@ "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E6 ;extrude 6 mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..." }, "machine_end_gcode": { - "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning" + "value": "'M104 S0 ;extruder heater off\\nM140 S0 ;heated bed heater off (if you have it)\\nG91 ;relative positioning\\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\\nM84 ;steppers off\\nG90 ;absolute positioning' if machine_heated_bed else 'M104 S0 ;extruder heater off\\nG91 ;relative positioning\\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\\nM84 ;steppers off\\nG90 ;absolute positioning'" } } } |