diff options
| author | Evg33 <evg33@evg33.ru> | 2020-04-13 20:53:55 +0300 |
|---|---|---|
| committer | Evg33 <evg33@evg33.ru> | 2020-04-13 20:53:55 +0300 |
| commit | d0c364983ae027a79698615a4656748c1e8726fb (patch) | |
| tree | 7e03458c18120ac79d27fee6acba241131801ee1 /resources/definitions/uni_base.def.json | |
| parent | d3da60974631f09a394b68a405e55b9fac478af6 (diff) | |
fix startup code
Diffstat (limited to 'resources/definitions/uni_base.def.json')
| -rw-r--r-- | resources/definitions/uni_base.def.json | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/resources/definitions/uni_base.def.json b/resources/definitions/uni_base.def.json index 834971bcee..465d49d04f 100644 --- a/resources/definitions/uni_base.def.json +++ b/resources/definitions/uni_base.def.json @@ -146,7 +146,7 @@ }, "overrides": { "machine_name": {"default_value": "UNI Base Printer"}, - "machine_start_gcode": {"default_value": "G90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 Z0 ;move Z to min endstops\nG28 X0 Y0 ;move X/Y to min endstops\nG92 E0 ;zero the extruded length\nG1 F5000 ;set speed\nG1 Z15.0 5000 ;move to start position Y\nM117 Printing..."}, + "machine_start_gcode": {"default_value": "G90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 Z0 ;move Z to min endstops\nG28 X0 Y0 ;move X/Y to min endstops\nG92 E0 ;zero the extruded length\nG1 F5000 ;set speed\nG1 Z15 F5000 ;move to start position Y\nM117 Printing..."}, "machine_end_gcode": {"default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off\nG91 ;relative positioning\nG1 E-4 F300 ;retract the filament a bit before lifting the nozzle to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F5000 ;move Z up a bit and retract filament even more\nG28 Z0 ;move bed down\nG28 X0 Y0 ;move X/Y to min endstops so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning\nM107 ;switch off cooling fan"}, "machine_heated_bed": {"default_value": true}, "material_diameter": {"default_value": 1.75}, |