diff options
author | Jaime van Kessel <nallath@gmail.com> | 2019-12-10 15:06:37 +0300 |
---|---|---|
committer | Jaime van Kessel <nallath@gmail.com> | 2019-12-10 15:06:37 +0300 |
commit | f66b1e6fdef1749cbdb6f2e95a9678ae4275acbd (patch) | |
tree | 67acee24fce874c3284ad9e4d76311910be7518d /resources/definitions/vertex_k8400.def.json | |
parent | dd8993e88cd8c8d69d9b15e52d5cb1221c689fbc (diff) | |
parent | 7ba1db830a7c4cb4bc3f11d0084b25280109e7f7 (diff) |
Merge branch 'master' of github.com:Ultimaker/Cura into CURA-6522_revert_edge_distance_hack
Diffstat (limited to 'resources/definitions/vertex_k8400.def.json')
-rw-r--r-- | resources/definitions/vertex_k8400.def.json | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/resources/definitions/vertex_k8400.def.json b/resources/definitions/vertex_k8400.def.json index b2a6374f83..bbeb8510ba 100644 --- a/resources/definitions/vertex_k8400.def.json +++ b/resources/definitions/vertex_k8400.def.json @@ -50,10 +50,10 @@ "default_value": "RepRap (Marlin/Sprinter)" }, "machine_start_gcode": { - "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..." + "default_value": "M104 T0 S{material_print_temperature_layer_0}\nG28 ;Home extruder\nG90 ;Absolute positioning\nM82 ;Extruder in absolute mode\nG1 Z1 F100\nG92 E0 ;Reset extruder position\nM109 T0 S{material_print_temperature_layer_0}\nG1 E20 F100\nG92 E0 ;Reset extruder position" }, "machine_end_gcode": { - "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning" + "default_value": "G1 X0 Y0 Z130 ;Get extruder out of way\nM107 ;Turn off fan\n;Disable all extruders\nG91 ;Relative positioning\nT0\nG1 E-1 ;Reduce filament pressure\nM104 T0 S0\nG90 ;Absolute positioning\nG92 E0 ;Reset extruder position\nM140 S0 ;Disable heated bed\nM84 ;Turn steppers off" } } }
\ No newline at end of file |