M192 removed from start code, parking position changed to X351

1 files changed, 2 insertions, 11 deletions

diff --git a/resources/definitions/weedo_x40.def.json b/resources/definitions/weedo_x40.def.json
index 3feaca9b6a..ab9b06f27d 100644
--- a/resources/definitions/weedo_x40.def.json
+++ b/resources/definitions/weedo_x40.def.json
@@ -21,16 +21,8 @@
             "bestfilament_pla_green",

             "leapfrog_abs_natural",

             "leapfrog_epla_natural",

-            "leapfrog_pva_natural",

-            "structur3d_dap100silicone",

-            "generic_gffpa",

-            "generic_gffcpe",

-            "generic_cffpa",

-            "generic_cffcpe", 

-            "generic_petg",

-            "generic_hips",

+            "leapfrog_pva_natural",,

             "generic_pc_175",

-            "generic_pc",

             "generic_nylon_175",

             "generic_nylon",

             "goofoo_abs",

@@ -120,7 +112,6 @@
             "redd_petg",

             "redd_pla",

             "redd_tpe",            

-            "structur3d_dap100silicone",

             "tizyx_abs",

             "tizyx_flex",

             "tizyx_petg",

@@ -194,7 +185,7 @@
         "machine_max_acceleration_e": { "value": 5000 },

         "gantry_height": { "value": "12" },

         "machine_extruder_count": { "default_value": 2 },

-        "machine_start_gcode": {"default_value": "; x40-community.org configuration Rev. 08\n;(**** start.gcode for WEEDO X40 DUAL****)\nT{initial_extruder_nr} S ; Selected start extruder\nM140 S{material_bed_temperature_layer_0} ; Preheat bed\nM109 S{material_print_temperature_layer_0}; Preheat nozzle\nM73 P0 ; Set current print progress percentage\nG21 ; Millimeter Units\nG90 ; Absolute positioning\nM82 ; Extruder in absolute mode\nT0 S ; Select left extruder\nM301 H1 P15.53 I1.32 D45.75 ; PID left extruder with Weedo X40 coolingsystem\n;M301 H1 P13.32 I0.98 D45.13 ; PID left extruder with X40 Community coolingsystem\nM92 E94.90 ; Calibrate left extruder\nT1 S ; Select right extruder\nM301 H1 P15.44 I1.29 D46.11 ; PID right extruder with Weedo X40 coolingsystem\n;M301 H1 P13.32 I0.98 D45.13 ; PID right extruder with X40 Community coolingsystem\nM92 E94.90 ; Calibrate right extruder\nT0 S ; Select left extruder\nG28 ; Auto home\nG29 ; Bed Leveling\nG1 X-47 F3000 ; Move left nozzle to parking position\nT1 S ; select right extruder\nG1 X352 F3000 ; Move right nozzle to parking position\nM107 P0 ; Turn off left fan\nM107 P1 ; Turn off right fan\nT{initial_extruder_nr} S ; Set start extruder\nM190 S{material_bed_temperature_layer_0} ; Waiting for bed temperature\nM192 S{material_print_temperature_layer_0} ; Waiting for nozzle temperature\nG1 E50 F100 ; Extrude in parking position\nM77 ; Stop heat up timer\nM75 ; Start print timer\n" 

+        "machine_start_gcode": {"default_value": "; x40-community.org configuration Rev. 08\n;(**** start.gcode for WEEDO X40 DUAL****)\nT{initial_extruder_nr} S ; Selected start extruder\nM140 S{material_bed_temperature_layer_0} ; Preheat bed\nM109 S{material_print_temperature_layer_0}; Preheat nozzle\nM73 P0 ; Set current print progress percentage\nG21 ; Millimeter Units\nG90 ; Absolute positioning\nM82 ; Extruder in absolute mode\nT0 S ; Select left extruder\nM301 H1 P15.53 I1.32 D45.75 ; PID left extruder with Weedo X40 coolingsystem\n;M301 H1 P13.32 I0.98 D45.13 ; PID left extruder with X40 Community coolingsystem\nM92 E94.90 ; Calibrate left extruder\nT1 S ; Select right extruder\nM301 H1 P15.44 I1.29 D46.11 ; PID right extruder with Weedo X40 coolingsystem\n;M301 H1 P13.32 I0.98 D45.13 ; PID right extruder with X40 Community coolingsystem\nM92 E94.90 ; Calibrate right extruder\nT0 S ; Select left extruder\nG28 ; Auto home\nG29 ; Bed Leveling\nG1 X-47 F3000 ; Move left nozzle to parking position\nT1 S ; select right extruder\nG1 X351 F3000 ; Move right nozzle to parking position\nM107 P0 ; Turn off left fan\nM107 P1 ; Turn off right fan\nT{initial_extruder_nr} S ; Set start extruder\nM190 S{material_bed_temperature_layer_0} ; Waiting for bed temperature\nG1 E50 F100 ; Extrude in parking position\nM77 ; Stop heat up timer\nM75 ; Start print timer\n" 

         },

         "machine_end_gcode": {"default_value": "(*********end X40 End.gcode*******)\nG28 X Y F3000\nG91 ; Relative positioning\nG1 E-6 ; Reduce filament pressure\nG90 ; Absolute positioning\nG0 Y300 F3000 ; Move headbed\nM104 S0 T0 ; Cool down left extruder\nM104 S0 T1 ; Cool down right extruder\nM140 S0 ; Cool down heatbed\nM107 P0 ; Turn off left fan\nM107 P1 ; Turn off right fan\nM82; Extruder in absolute mode\nM73 P100 ; Set print progress to 100%" },