diff options
author | Aleksei Kvitinskii <aleksei.kvitinskii@gmail.com> | 2019-02-12 21:13:53 +0300 |
---|---|---|
committer | Aleksei Kvitinskii <aleksei.kvitinskii@gmail.com> | 2019-02-12 21:13:53 +0300 |
commit | 22f7d30197ce077f23776d4a0d2f0e2e1b84f4cb (patch) | |
tree | a9c7845bf5a8200667716b7d2aa8174601e1a86c /resources/definitions/z-bolt_plus.def.json | |
parent | dad8acb1063089d2a8cf734290216fb4f983b53b (diff) |
merged extruders and replace value with default_value
Diffstat (limited to 'resources/definitions/z-bolt_plus.def.json')
-rw-r--r-- | resources/definitions/z-bolt_plus.def.json | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/resources/definitions/z-bolt_plus.def.json b/resources/definitions/z-bolt_plus.def.json index 4fb989742f..57331df4c6 100644 --- a/resources/definitions/z-bolt_plus.def.json +++ b/resources/definitions/z-bolt_plus.def.json @@ -10,7 +10,7 @@ "platform": "z-bolt_plus_platform.stl", "machine_extruder_trains": { - "0": "z-bolt_plus_extruder_0" + "0": "z-bolt_extruder_0" } }, @@ -53,7 +53,7 @@ "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E6 ;extrude 6 mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..." }, "machine_end_gcode": { - "value": "'M104 S0 ;extruder heater off' + ('\\nM140 S0 ;heated bed heater off' if machine_heated_bed else '') + '\\nG91 ;relative positioning\\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\\nG28 X0 Y0 Z0 ;move X/Y to min endstops, so the head is out of the way\\nM84 ;steppers off\\nG90 ;absolute positioning'" + "default_value": "'M104 S0 ;extruder heater off' + ('\nM140 S0 ;heated bed heater off' if machine_heated_bed else '') + '\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 Z0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning'" } } }
\ No newline at end of file |