Update configurations for these 3 printers of HCTECH

Update configurations for these 3 printers of HCTECH

3 files changed, 36 insertions, 227 deletions

diff --git a/resources/definitions/hctech_hc300-m1&m1h.def.json b/resources/definitions/hctech_hc300-m1&m1h.def.json
index ce30c1c70c..188ed3e7e7 100644
--- a/resources/definitions/hctech_hc300-m1&m1h.def.json
+++ b/resources/definitions/hctech_hc300-m1&m1h.def.json
@@ -8,7 +8,6 @@
         "manufacturer": "HCTECH",
         "file_formats": "text/x-gcode",
         "platform": "hctech_hc300-m1&m1h.3mf",
-        "has_variants": false,
         "has_machine_quality": false,
         "machine_extruder_trains": {
             "0": "hctech_hc300-m1&m1h_extruder_0"
@@ -33,89 +32,26 @@
             "default_value": 0.3,
             "maximum_value_warning": 2.0
         },
+        "adhesion_type": { "default_value": "skirt" },
         "retraction_speed": { "default_value": 35},
-        "retraction_hop_enabled": { "value": "False" },
-        "retraction_hop": { "value": 0.2 },
-        "retraction_combing": { "value": "'off' if retraction_hop_enabled else 'noskin'" },
-        "retraction_combing_max_distance": { "value": 30 },
-        "travel_avoid_other_parts": { "value": true },
         "travel_avoid_supports": { "value": true },
         "travel_retract_before_outer_wall": { "value": true },
-        
         "retraction_enable": { "value": true },
-        "retraction_count_max": { "value": 100 },
-        "retraction_extrusion_window": { "value": 10 },
-        "retraction_min_travel": { "value": 1.5 },
 
-        "adhesion_type": { "default_value": "skirt" },
-        "gantry_height": { "value": "30" },
+        "gantry_height": { "value": "55" },
         "speed_print": { "default_value": 60.0 } ,
-        "speed_infill": { "value": "speed_print" },
-        "speed_wall": { "value": "speed_print / 2" },
-        "speed_wall_0": { "value": "speed_wall" },
-        "speed_wall_x": { "value": "speed_wall" },
-        "speed_topbottom": { "value": "speed_print / 2" },
-        "speed_roofing": { "value": "speed_topbottom" },
-        "speed_travel": { "value": "150.0 if speed_print < 60 else 250.0 if speed_print > 100 else speed_print * 2.5" },
-        "speed_layer_0": { "value": 30.0 },
-        "speed_print_layer_0": { "value": "speed_layer_0" },
-        "speed_travel_layer_0": { "value": "100 if speed_layer_0 < 20 else 150 if speed_layer_0 > 30 else speed_layer_0 * 5" },
-        "speed_prime_tower": { "value": "speed_topbottom" },
-        "speed_support": { "value": "speed_wall_0" },
-        "speed_support_interface": { "value": "speed_topbottom" },
-        "speed_z_hop": { "value": 5 },
-        "machine_max_feedrate_x": { "value": 100 },
-        "machine_max_feedrate_y": { "value": 100 },
-        "machine_max_feedrate_z": { "value": 30 },
-        "machine_max_feedrate_e": { "value": 50 },
-        "machine_max_acceleration_x": { "default_value": 2000 },
-        "machine_max_acceleration_y": { "default_value": 2000 },
-        "machine_max_acceleration_z": { "default_value": 100 },
-        "machine_max_acceleration_e": { "default_value": 2000 },
-        "machine_max_jerk_xy": { "default_value": 5.0 },
-        "machine_max_jerk_z": { "default_value": 0.4 },
-        "machine_max_jerk_e": { "default_value": 5.0 },
+
         "material_diameter": { "default_value": 1.75 },
-        "acceleration_print": { "value": 1000 },
-        "acceleration_travel": { "value": 1500 },
+
         "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
-        "machine_start_gcode": { "default_value": "G1 Z2 ;Raise Z\nG28 X Y ;Home XY\nG92 E0 ;Reset Extruder\nG1 E-1 F2400 ;Retract\nG92 E0 ;Reset Extruder\nG1 X315 Y70 F3000 ;clean nozzle\nG1 X330 Y150 F5000\nG1 X315 Y70\nG1 E-1 F2400 ;Retract\nG92 E0 ;Reset Extruder\nG28 Z ;home Z\nG1 X300 Y150 Z5\nG12\nG29 ;Measure the bed\nM500 ;Store parameters" },
-        "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-1 F2700 ;Retract a bit\nG1 Z1 E-1 F2400 ;Retract and raise Z\nG1 Z2 ;Raise Z\nG90 ;Absolute positioning\nG12 ;clean nozzle\nG1 X5 Y300 ;Return to Start Point\nM106 S0 ;Switch off part cooling fan\nM104 S0 ;turn off temperature\nM140 S0 ;turn off Heated Bed\nM84 X Y E ;Disable all steppers but Z\nM81 ;turn-off power" },
-        "wall_line_count": { "value": 3 },
-        "top_bottom_thickness": { "default_value": 1 },
+        "machine_start_gcode": { "default_value": "G1 Z2 ;Raise Z\nG28 X Y ;Home XY\nG92 E0 ;Reset Extruder\nG1 E-1 F2400 ;Retract\nG92 E0 ;Reset Extruder\nG28 Z ;home Z\nG29 ; Measure the bed\nM500 ; Store to EEPROM\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.36 F5000.0 ; Move to start position\nG1 X0.1 Y200.0 Z0.36 F1500.0 E15 ; Draw the first line\nG1 X0.4 Y200.0 Z0.36 F5000.0 ; Move to side a little\nG1 X0.4 Y20 Z0.36 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder" },
+        "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-1 F2700 ;Retract a bit\nG1 Z1 E-1 F2400 ;Retract and raise Z\nG1 Z2 ;Raise Z\nG90 ;Absolute positioning\nG12 P1;clean nozzle\nG1 X5 Y300 ;Return to Start Point\nM106 S0 ;Switch off part cooling fan\nM104 S0 ;turn off temperature\nM140 S0 ;turn off Heated Bed\nM84 X Y E ;Disable all steppers but Z\nM81 ;turn-off power" },
+
         "cool_fan_speed": { "value": 75 },
-        "cool_fan_full_at_height": { "value": "layer_height_0 + 2 * layer_height" },
         "cool_fan_enabled": { "value": true },
-        "cool_min_layer_time": { "value": 10 },
-        "brim_replaces_support": { "value": false },
-        "skirt_gap": { "value": 2 },
-        "skirt_line_count": { "default_value": 3 },
-        "switch_extruder_retraction_amount": { "value": 2 },
-        "switch_extruder_retraction_speeds": { "default_value": 35 },
-        "prime_tower_enable": { "default_value": true },
-        "infill_pattern": { "value": "triangles" },
-        "initial_layer_line_width_factor": { "default_value": 120.0 },
+
         "line_width": { "value": 0.38 },
         "travel_avoid_distance": { "value": 1 },
-        "infill_overlap": { "value": 35.0 },
-        "skin_overlap": { "value": 10.0 },        
-        "support_angle": { "value": "math.floor(math.degrees(math.atan(line_width/2.0/layer_height)))" },
-        "support_pattern": { "value": "'zigzag'" },
-        "support_infill_rate": { "value": "0 if support_enable and support_structure == 'tree' else 20" },
-        "support_use_towers": { "value": false },
-        "support_xy_distance": { "value": "wall_line_width_0 * 2" },
-        "support_xy_distance_overhang": { "value": "wall_line_width_0" },
-        "support_z_distance": { "value": "layer_height if layer_height >= 0.16 else layer_height * 2" },
-        "support_top_distance": { "value":  "extruderValue(support_roof_extruder_nr if support_roof_enable else support_infill_extruder_nr, 'support_z_distance') + (layer_height if support_structure == 'tree' else 0)"},
-        "support_xy_overrides_z": { "value": "'xy_overrides_z'" },
-        "support_wall_count": { "value": 1 },
-        "support_brim_enable": { "value": true },
-        "support_brim_width": { "value": 4 },
-
-        "support_interface_enable": { "value": true },
-        "support_interface_height": { "value": "layer_height * 4" },
-        "support_interface_density": { "value": 30 },
-        "support_interface_pattern": { "value": "'grid'" },
-        "support_interface_skip_height": { "value": 0.2 }
+        "infill_before_walls": { "value": false }
     }
 }
diff --git a/resources/definitions/hctech_hc300-m2h.def.json b/resources/definitions/hctech_hc300-m2h.def.json
index ec0c8520c8..d08258c7c6 100644
--- a/resources/definitions/hctech_hc300-m2h.def.json
+++ b/resources/definitions/hctech_hc300-m2h.def.json
@@ -8,7 +8,6 @@
         "manufacturer": "HCTECH",
         "file_formats": "text/x-gcode",
         "platform": "hctech_hc300-m2h.3mf",
-        "has_variants": false,
         "has_machine_quality": false,
         "machine_extruder_trains": {
             "0": "hctech_hc300-m2h_extruder_0",
@@ -34,89 +33,26 @@
             "default_value": 0.3,
             "maximum_value_warning": 2.0
         },
+        "adhesion_type": { "default_value": "skirt" },
         "retraction_speed": { "default_value": 35},
-        "retraction_hop_enabled": { "value": "False" },
-        "retraction_hop": { "value": 0.2 },
-        "retraction_combing": { "value": "'off' if retraction_hop_enabled else 'noskin'" },
-        "retraction_combing_max_distance": { "value": 30 },
-        "travel_avoid_other_parts": { "value": true },
         "travel_avoid_supports": { "value": true },
         "travel_retract_before_outer_wall": { "value": true },
-        
         "retraction_enable": { "value": true },
-        "retraction_count_max": { "value": 100 },
-        "retraction_extrusion_window": { "value": 10 },
-        "retraction_min_travel": { "value": 1.5 },
 
-        "adhesion_type": { "default_value": "skirt" },
-        "gantry_height": { "value": "30" },
+        "gantry_height": { "value": "55" },
         "speed_print": { "default_value": 60.0 } ,
-        "speed_infill": { "value": "speed_print" },
-        "speed_wall": { "value": "speed_print / 2" },
-        "speed_wall_0": { "value": "speed_wall" },
-        "speed_wall_x": { "value": "speed_wall" },
-        "speed_topbottom": { "value": "speed_print / 2" },
-        "speed_roofing": { "value": "speed_topbottom" },
-        "speed_travel": { "value": "150.0 if speed_print < 60 else 250.0 if speed_print > 100 else speed_print * 2.5" },
-        "speed_layer_0": { "value": 30.0 },
-        "speed_print_layer_0": { "value": "speed_layer_0" },
-        "speed_travel_layer_0": { "value": "100 if speed_layer_0 < 20 else 150 if speed_layer_0 > 30 else speed_layer_0 * 5" },
-        "speed_prime_tower": { "value": "speed_topbottom" },
-        "speed_support": { "value": "speed_wall_0" },
-        "speed_support_interface": { "value": "speed_topbottom" },
-        "speed_z_hop": { "value": 5 },
-        "machine_max_feedrate_x": { "value": 100 },
-        "machine_max_feedrate_y": { "value": 100 },
-        "machine_max_feedrate_z": { "value": 30 },
-        "machine_max_feedrate_e": { "value": 50 },
-        "machine_max_acceleration_x": { "default_value": 2000 },
-        "machine_max_acceleration_y": { "default_value": 2000 },
-        "machine_max_acceleration_z": { "default_value": 100 },
-        "machine_max_acceleration_e": { "default_value": 2000 },
-        "machine_max_jerk_xy": { "default_value": 5.0 },
-        "machine_max_jerk_z": { "default_value": 0.4 },
-        "machine_max_jerk_e": { "default_value": 5.0 },
+
         "material_diameter": { "default_value": 1.75 },
-        "acceleration_print": { "value": 1000 },
-        "acceleration_travel": { "value": 1500 },
+
         "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
-        "machine_start_gcode": { "default_value": "G1 Z2 ;Raise Z\nG28 X Y ;Home XY\nT1 ;switch to right extruder\nG1 X5 Y325 F4000 ;Move to Start Position\nG92 E0 ;Reset Extruder\nG1 E20 F60 ;extrude\nM400\nG92 E0 ;Reset Extruder\nG1 E-2 F2700 ;Retract\nG92 E0 ;Reset Extruder\nG1 X150 F5000 ;Clean Nozzle\nG1 X5 ;Back to Start Position\nG1 X220\nG1 X5\nT0 ;switch to left extruder\nG1 X5 Y325 F4000 ;Move to Start Position\nG92 E0 ;Reset Extruder\nG1 E20 F60 ;extrude\nM400\nG92 E0 ;Reset Extruder\nG4 S15\nG1 E-2 F2700; Retract\nG92 E0 ;Reset Extruder\nG1 X150 F5000 ;Clean Nozzle\nG1 X5 ;Back to Start Position\nG1 X220\nG1 X5\nG28 Z ;home Z\nG29 ;Measure the bed\nM500 ;Store parameters\nG1 X0 Y300 F4000 ;Move to corner" },
-        "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-1 F2700 ;Retract a bit\nG1 Z1 E-1 F2400 ;Retract and raise Z\nG1 Z2 ;Raise Z\nG90 ;Absolute positioning\nG12 ;clean nozzle\nG1 X5 Y325 ;Return to Start Point\nM106 S0 ;Switch off part cooling fan\nM104 S0 ;turn off temperature\nM140 S0 ;turn off Heated Bed\nM84 X Y E ;Disable all steppers but Z\nM81 ;turn-off power" },
-        "wall_line_count": { "value": 3 },
-        "top_bottom_thickness": { "default_value": 1 },
+        "machine_start_gcode": { "default_value": "G1 Z2 ;Raise Z\nG28 X Y ;Home XY\nT1 ;switch to right extruder\nG1 X5 Y319 F4000 ;Move to Start Position\nG92 E0 ;Reset Extruder\nG1 E20 F60 ;extrude\nM400 ;Wait move\nG92 E0 ;Reset Extruder\nG1 E-2 F2700 ;Retract\nG92 E0 ;Reset Extruder\nG1 X150 F5000 ;Clean Nozzle\nG1 X5 ;Clean Nozzle\nG1 X220 ;Repeat\nG1 X5 ;Back to start posotion\nT0 ;switch to left extruder\nG1 X5 Y319 F4000 ;Move to Start Position\nG92 E0 ;Reset Extruder\nG1 E20 F60 ;extrude\nM400 ;Wait move\nG92 E0 ;Reset Extruder\nG4 S15 ;Wait 15s\nG1 E-2 F2700; Retract\nG92 E0 ;Reset Extruder\nG1 X150 F5000 ;Clean Nozzle\nG1 X5 ;Clean nozzle\nG1 X220 ;Repeat\nG1 X5 ;Back to start position\nG28 Z ;home Z\nG29 ;Measure the bed\nM500 ;Store parameters\nG1 X0 Y300 F4000 ;Move to corner" },
+        "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-1 F2700 ;Retract a bit\nG1 Z1 E-1 F2400 ;Retract and raise Z\nG1 Z2 ;Raise Z\nG90 ;Absolute positioning\nG12 ;clean nozzle\nG1 X5 Y319 ;Return to Start Point\nM106 S0 ;Switch off part cooling fan\nM104 S0 ;turn off temperature\nM140 S0 ;turn off Heated Bed\nM84 X Y E ;Disable all steppers but Z\nM81 ;turn-off power" },
+        
         "cool_fan_speed": { "value": 75 },
-        "cool_fan_full_at_height": { "value": "layer_height_0 + 2 * layer_height" },
         "cool_fan_enabled": { "value": true },
-        "cool_min_layer_time": { "value": 10 },
-        "brim_replaces_support": { "value": false },
-        "skirt_gap": { "value": 2 },
-        "skirt_line_count": { "default_value": 3 },
-        "switch_extruder_retraction_amount": { "value": 2 },
-        "switch_extruder_retraction_speeds": { "default_value": 35 },
-        "prime_tower_enable": { "default_value": true },
-        "infill_pattern": { "value": "triangles" },
-        "initial_layer_line_width_factor": { "default_value": 120.0 },
+       
         "line_width": { "value": 0.38 },
         "travel_avoid_distance": { "value": 1 },
-        "infill_overlap": { "value": 35.0 },
-        "skin_overlap": { "value": 10.0 },        
-        "support_angle": { "value": "math.floor(math.degrees(math.atan(line_width/2.0/layer_height)))" },
-        "support_pattern": { "value": "'zigzag'" },
-        "support_infill_rate": { "value": "0 if support_enable and support_structure == 'tree' else 20" },
-        "support_use_towers": { "value": false },
-        "support_xy_distance": { "value": "wall_line_width_0 * 2" },
-        "support_xy_distance_overhang": { "value": "wall_line_width_0" },
-        "support_z_distance": { "value": "layer_height if layer_height >= 0.16 else layer_height * 2" },
-        "support_top_distance": { "value":  "extruderValue(support_roof_extruder_nr if support_roof_enable else support_infill_extruder_nr, 'support_z_distance') + (layer_height if support_structure == 'tree' else 0)"},
-        "support_xy_overrides_z": { "value": "'xy_overrides_z'" },
-        "support_wall_count": { "value": 1 },
-        "support_brim_enable": { "value": true },
-        "support_brim_width": { "value": 4 },
-
-        "support_interface_enable": { "value": true },
-        "support_interface_height": { "value": "layer_height * 4" },
-        "support_interface_density": { "value": 30 },
-        "support_interface_pattern": { "value": "'grid'" },
-        "support_interface_skip_height": { "value": 0.2 }
+		"infill_before_walls": { "value": false }
     }
 }
diff --git a/resources/definitions/hctech_hc300-m3.def.json b/resources/definitions/hctech_hc300-m3.def.json
index 5efd361d97..cbbae35cfa 100644
--- a/resources/definitions/hctech_hc300-m3.def.json
+++ b/resources/definitions/hctech_hc300-m3.def.json
@@ -8,7 +8,6 @@
         "manufacturer": "HCTECH",
         "file_formats": "text/x-gcode",
         "platform": "hctech_hc300-m3.3mf",
-        "has_variants": false,
         "has_machine_quality": false,
         "machine_extruder_trains": {
             "0": "hctech_hc300-m3_extruder_0"
@@ -16,12 +15,14 @@
     },
 
     "overrides": {
-        "machine_head_with_fans_polygon": { "default_value": [
-            [-49, 36],
-            [-36, -29],
-            [36, -29],
-            [36, 49]
-        ] },
+        "machine_head_with_fans_polygon":
+		{ "default_value": [
+				[-49, 36],
+				[-36, -29],
+				[36, -29],
+				[36, 49]
+			] 
+		},
         "machine_name": { "default_value": "HCTECH HC300-M3" },
         "machine_extruder_count": { "default_value": 1 },
         "machine_heated_bed": { "default_value": true },
@@ -30,92 +31,28 @@
         "machine_height": { "default_value": 300 },
         "machine_center_is_zero": { "default_value": false },
         "retraction_amount": {
-            "default_value": 6,
-            "maximum_value_warning": 15
+            "default_value": 3,
+            "maximum_value_warning": 8
         },
+        "adhesion_type": { "default_value": "skirt" },
         "retraction_speed": { "default_value": 35},
-        "retraction_hop_enabled": { "value": "False" },
-        "retraction_hop": { "value": 0.2 },
-        "retraction_combing": { "value": "'off' if retraction_hop_enabled else 'noskin'" },
-        "retraction_combing_max_distance": { "value": 30 },
-        "travel_avoid_other_parts": { "value": true },
         "travel_avoid_supports": { "value": true },
         "travel_retract_before_outer_wall": { "value": true },
-        
         "retraction_enable": { "value": true },
-        "retraction_count_max": { "value": 100 },
-        "retraction_extrusion_window": { "value": 10 },
-        "retraction_min_travel": { "value": 1.5 },
 
-        "adhesion_type": { "default_value": "skirt" },
-        "gantry_height": { "value": "30" },
+        "gantry_height": { "value": "55" },
         "speed_print": { "default_value": 60.0 } ,
-        "speed_infill": { "value": "speed_print" },
-        "speed_wall": { "value": "speed_print / 2" },
-        "speed_wall_0": { "value": "speed_wall" },
-        "speed_wall_x": { "value": "speed_wall" },
-        "speed_topbottom": { "value": "speed_print / 2" },
-        "speed_roofing": { "value": "speed_topbottom" },
-        "speed_travel": { "value": "150.0 if speed_print < 60 else 250.0 if speed_print > 100 else speed_print * 2.5" },
-        "speed_layer_0": { "value": 30.0 },
-        "speed_print_layer_0": { "value": "speed_layer_0" },
-        "speed_travel_layer_0": { "value": "100 if speed_layer_0 < 20 else 150 if speed_layer_0 > 30 else speed_layer_0 * 5" },
-        "speed_prime_tower": { "value": "speed_topbottom" },
-        "speed_support": { "value": "speed_wall_0" },
-        "speed_support_interface": { "value": "speed_topbottom" },
-        "speed_z_hop": { "value": 5 },
-        "machine_max_feedrate_x": { "value": 100 },
-        "machine_max_feedrate_y": { "value": 100 },
-        "machine_max_feedrate_z": { "value": 30 },
-        "machine_max_feedrate_e": { "value": 50 },
-        "machine_max_acceleration_x": { "default_value": 1000 },
-        "machine_max_acceleration_y": { "default_value": 1000 },
-        "machine_max_acceleration_z": { "default_value": 100 },
-        "machine_max_acceleration_e": { "default_value": 1000 },
-        "machine_max_jerk_xy": { "default_value": 5.0 },
-        "machine_max_jerk_z": { "default_value": 0.4 },
-        "machine_max_jerk_e": { "default_value": 5.0 },
+
         "material_diameter": { "default_value": 1.75 },
-        "acceleration_print": { "value": 500 },
-        "acceleration_travel": { "value": 1000 },
         "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
-        "machine_start_gcode": { "default_value": "G1 Z2 ;Raise Z\nG28 X Y ;Home XY\nG92 E0 ;Reset Extruder\nG1 E-4 F2400 ;Retract\nG92 E0 ;Reset Extruder\nG28 Z ;home Z\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.36 F5000.0 ; Move to start position\nG1 X0.1 Y200.0 Z0.36 F1500.0 E15 ; Draw the first line\nG1 X0.4 Y200.0 Z0.36 F5000.0 ; Move to side a little\nG1 X0.4 Y20 Z0.36 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder" },
-        "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 Z1 E-2 F2400 ;Retract and raise Z\nG1 Z2 ;Raise Z\nG90 ;Absolute positioning\nG1 X5 Y300 ;Return to Start Point\nM106 S0 ;Switch off part cooling fan\nM104 S0 ;turn off temperature\nM140 S0 ;turn off Heated Bed\nM84 X Y E ;Disable all steppers but Z" },
-        "wall_line_count": { "value": 3 },
-        "top_bottom_thickness": { "default_value": 1 },
+        "machine_start_gcode": { "default_value": "G28 X Y ;Home XY\nG92 E0 ;Reset Extruder\nG1 E-1 F2400 ;Retract\nG92 E0 ;Reset Extruder\nG28 Z ;home Z\nG29 ; Measure the bed\nM500 ; Store to EEPROM\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.36 F5000.0 ; Move to start position\nG1 X0.1 Y200.0 Z0.36 F1500.0 E15 ; Draw the first line\nG1 X0.4 Y200.0 Z0.36 F5000.0 ; Move to side a little\nG1 X0.4 Y20 Z0.36 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder" },
+        "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 Z1 E-2 F2400 ;Retract and raise Z\nG1 Z2 ;Raise Z\nG90 ;Absolute positioning\nG1 X5 Y290 ;Return to Start Point\nM106 S0 ;Switch off part cooling fan\nM104 S0 ;turn off temperature\nM140 S0 ;turn off Heated Bed\nM84 X Y E ;Disable all steppers but Z" },
+		        
         "cool_fan_speed": { "value": 75 },
-        "cool_fan_full_at_height": { "value": "layer_height_0 + 2 * layer_height" },
         "cool_fan_enabled": { "value": true },
-        "cool_min_layer_time": { "value": 10 },
-        "brim_replaces_support": { "value": false },
-        "skirt_gap": { "value": 2 },
-        "skirt_line_count": { "default_value": 3 },
-        "switch_extruder_retraction_amount": { "value": 2 },
-        "switch_extruder_retraction_speeds": { "default_value": 35 },
-        "prime_tower_enable": { "default_value": true },
-        "infill_pattern": { "value": "triangles" },
-        "initial_layer_line_width_factor": { "default_value": 120.0 },
+        
         "line_width": { "value": 0.38 },
         "travel_avoid_distance": { "value": 1 },
-        "infill_overlap": { "value": 35.0 },
-        "skin_overlap": { "value": 10.0 },        
-        "support_angle": { "value": "math.floor(math.degrees(math.atan(line_width/2.0/layer_height)))" },
-        "support_pattern": { "value": "'zigzag'" },
-        "support_infill_rate": { "value": "0 if support_enable and support_structure == 'tree' else 20" },
-        "support_use_towers": { "value": false },
-        "support_xy_distance": { "value": "wall_line_width_0 * 2" },
-        "support_xy_distance_overhang": { "value": "wall_line_width_0" },
-        "support_z_distance": { "value": "layer_height if layer_height >= 0.16 else layer_height * 2" },
-        "support_top_distance": { "value":  "extruderValue(support_roof_extruder_nr if support_roof_enable else support_infill_extruder_nr, 'support_z_distance') + (layer_height if support_structure == 'tree' else 0)"},
-        "support_xy_overrides_z": { "value": "'xy_overrides_z'" },
-        "support_wall_count": { "value": 1 },
-        "support_brim_enable": { "value": true },
-        "support_brim_width": { "value": 4 },
-
-        "support_interface_enable": { "value": true },
-        "support_interface_height": { "value": "layer_height * 4" },
-        "support_interface_density": { "value": 30 },
-        "support_interface_pattern": { "value": "'grid'" },
-        "support_interface_skip_height": { "value": 0.2 }
+		"infill_before_walls": { "value": false }
     }
 }