Merge branch 'main' into PP-15-enable-skin-edge-support

7 files changed, 112 insertions, 55 deletions

diff --git a/resources/definitions/SV02.def.json b/resources/definitions/SV02.def.json
index 067422354e..352cd23394 100644
--- a/resources/definitions/SV02.def.json
+++ b/resources/definitions/SV02.def.json
@@ -44,7 +44,6 @@
         "machine_max_jerk_xy": { "value": 8 },

         "machine_max_jerk_z": { "value": 0.4 },

         "machine_max_jerk_e": { "value": 5 },

-        "machine_heated_bed": { "default_value": true },

         "material_diameter": { "default_value": 1.75 },

         "infill_overlap": { "default_value": 15	},

         "acceleration_print": { "value": 500 },

diff --git a/resources/definitions/ultimaker.def.json b/resources/definitions/ultimaker.def.json
index 1795fd23ae..fecef93fbe 100644
--- a/resources/definitions/ultimaker.def.json
+++ b/resources/definitions/ultimaker.def.json
@@ -50,9 +50,6 @@
         "wall_thickness": {
             "value": "wall_line_width_0 + wall_line_width_x"
         },
-        "infill_before_walls": {
-            "value": "False"
-        },
         "infill_material_flow": {
             "value": "(1.95-infill_sparse_density / 100 if infill_sparse_density > 95 else 1) * material_flow"
         },
@@ -60,13 +57,16 @@
             "value": "'no_outer_surfaces'"
         },
         "roofing_layer_count": {
-            "value": "0"
+            "value": "1"
         },
         "roofing_material_flow": {
             "value": "material_flow"
         },
         "skin_material_flow": {
-            "value": "0.97 * material_flow"
+            "value": "0.95 * material_flow"
+        },
+        "support_interface_material_flow": {
+            "value": "skin_material_flow"
         },
         "skin_monotonic" : {
             "value": true
@@ -89,14 +89,118 @@
         "meshfix_maximum_deviation": {
             "value": "machine_nozzle_size / 10"
         },
-        "jerk_travel": {
-            "value": "jerk_print"
-        },
         "acceleration_travel": {
             "value": "acceleration_wall"
         },
         "skin_edge_support_thickness": {
             "value": "4 * layer_height if infill_sparse_density < 30 else 0"
+        },
+        "bridge_settings_enabled": {
+            "value": false
+        },
+        "bridge_wall_min_length": {
+            "value": 0
+        },
+        "bridge_skin_support_threshold": {
+            "value": 50
+        },
+        "bridge_sparse_infill_max_density": {
+            "value": 0
+        },
+        "bridge_wall_coast": {
+            "value": 0
+        },
+        "bridge_wall_speed": {
+            "value": "speed_wall"
+        },
+        "bridge_wall_material_flow": {
+            "value": "wall_material_flow"
+        },
+        "bridge_skin_speed": {
+            "value": "speed_topbottom"
+        },
+        "bridge_skin_material_flow": {
+            "value": "skin_material_flow"
+        },
+        "bridge_skin_density": {
+            "value": "80"
+        },
+        "bridge_fan_speed": {
+             "value": "cool_fan_speed_max"
+        },
+        "bridge_enable_more_layers": {
+            "value": false
+        },
+        "bridge_skin_speed_2": {
+            "value": "speed_topbottom"
+        },
+        "bridge_skin_material_flow_2": {
+            "value": "skin_material_flow"
+        },
+        "bridge_skin_density_2": {
+            "value": 100
+        },
+        "bridge_fan_speed_2": {
+            "value": "cool_fan_speed_min"
+        },
+        "bridge_skin_speed_3": {
+             "value": "speed_topbottom"
+        },
+        "bridge_skin_material_flow_3": {
+            "value": "skin_material_flow"
+        },
+        "bridge_skin_density_3": {
+             "value": 100
+        },
+        "bridge_fan_speed_3": {
+             "value": "cool_fan_speed_min"
+        },
+        "jerk_print": {
+            "value": "20",
+            "minimum_value_warning": 20
+        },
+        "jerk_infill": {
+            "minimum_value_warning": 20
+        },
+        "jerk_wall": {
+            "minimum_value_warning": 20
+        },
+        "jerk_wall_0": {
+            "minimum_value_warning": 20
+        },
+        "jerk_roofing": {
+            "minimum_value_warning": 20
+        },
+        "jerk_topbottom": {
+            "minimum_value_warning": 20
+        },
+        "jerk_support": {
+            "minimum_value_warning": 20
+        },
+        "jerk_support_infill": {
+            "minimum_value_warning": 20
+        },
+        "jerk_support_interface": {
+            "minimum_value_warning": 20
+        },
+        "jerk_prime_tower": {
+            "minimum_value_warning": 20
+        },
+        "jerk_layer_0": {
+            "minimum_value_warning": 20
+        },
+        "jerk_print_layer_0": {
+            "minimum_value_warning": 20
+        },
+        "jerk_travel": {
+            "value": "jerk_print",
+            "minimum_value_warning": 20
+        },
+        "jerk_travel_layer_0": {
+            "minimum_value_warning": 20
+        },
+        "jerk_skirt_brim": {
+            "minimum_value_warning": 20
         }
     }
 }
diff --git a/resources/definitions/ultimaker3.def.json b/resources/definitions/ultimaker3.def.json
index fd21ab5271..99e4ab4176 100644
--- a/resources/definitions/ultimaker3.def.json
+++ b/resources/definitions/ultimaker3.def.json
@@ -101,20 +101,6 @@
         "infill_wipe_dist": { "value": "0" },
         "initial_layer_line_width_factor": { "value": "120" },
         "jerk_enabled": { "value": "True" },
-        "jerk_print": { "value": "20", "minimum_value_warning": 20 },
-        "jerk_infill": {"minimum_value_warning": 20 },
-        "jerk_wall": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_wall_0": { "value": "jerk_wall", "minimum_value_warning": 20 },
-        "jerk_roofing": {"minimum_value_warning": 20 },
-        "jerk_topbottom": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_support": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_support_infill": {"minimum_value_warning": 20 },
-        "jerk_support_interface": { "value": "math.ceil(jerk_print * 5 / 20)"},
-        "jerk_prime_tower": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_layer_0": { "value": "jerk_topbottom", "minimum_value_warning": 20},
-        "jerk_print_layer_0": {"minimum_value_warning": 20 },
-        "jerk_travel_layer_0": {"minimum_value_warning": 20 },
-        "jerk_skirt_brim": {"minimum_value_warning": 20 },
         "layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" },
         "layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" },
         "layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" },
diff --git a/resources/definitions/ultimaker_s3.def.json b/resources/definitions/ultimaker_s3.def.json
index 640a062c6d..22a486abb6 100644
--- a/resources/definitions/ultimaker_s3.def.json
+++ b/resources/definitions/ultimaker_s3.def.json
@@ -93,20 +93,6 @@
         "infill_pattern": { "value": "'zigzag' if infill_sparse_density > 80 else 'triangles'" },
         "infill_wipe_dist": { "value": "0" },
         "jerk_enabled": { "value": "True" },
-        "jerk_print": { "value": "20", "minimum_value_warning": 20 },
-        "jerk_infill": {"minimum_value_warning": 20 },
-        "jerk_wall": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_wall_0": { "value": "jerk_wall", "minimum_value_warning": 20 },
-        "jerk_roofing": {"minimum_value_warning": 20 },
-        "jerk_topbottom": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_support": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_support_infill": {"minimum_value_warning": 20 },
-        "jerk_support_interface": { "value": "math.ceil(jerk_print * 5 / 20)"},
-        "jerk_prime_tower": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_layer_0": { "value": "jerk_topbottom", "minimum_value_warning": 20},
-        "jerk_print_layer_0": {"minimum_value_warning": 20 },
-        "jerk_travel_layer_0": {"minimum_value_warning": 20 },
-        "jerk_skirt_brim": {"minimum_value_warning": 20 },
         "layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" },
         "layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" },
         "layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" },
@@ -155,7 +141,6 @@
         "switch_extruder_prime_speed": { "value": "15" },
         "switch_extruder_retraction_amount": { "value": "8" },
         "top_bottom_thickness": { "value": "1" },
-        "travel_avoid_supports": { "value": "True" },
         "travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" },
         "wall_0_inset": { "value": "0" },
         "initial_layer_line_width_factor": { "value": "120" },
diff --git a/resources/definitions/ultimaker_s5.def.json b/resources/definitions/ultimaker_s5.def.json
index 0d5d7499cc..74fb2605ad 100644
--- a/resources/definitions/ultimaker_s5.def.json
+++ b/resources/definitions/ultimaker_s5.def.json
@@ -95,20 +95,6 @@
         "infill_pattern": { "value": "'zigzag' if infill_sparse_density > 80 else 'triangles'" },
         "infill_wipe_dist": { "value": "0" },
         "jerk_enabled": { "value": "True" },
-        "jerk_print": { "value": "20", "minimum_value_warning": 20 },
-        "jerk_infill": {"minimum_value_warning": 20 },
-        "jerk_wall": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_wall_0": { "value": "jerk_wall", "minimum_value_warning": 20 },
-        "jerk_roofing": {"minimum_value_warning": 20 },
-        "jerk_topbottom": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_support": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_support_infill": {"minimum_value_warning": 20 },
-        "jerk_support_interface": { "value": "math.ceil(jerk_print * 5 / 20)"},
-        "jerk_prime_tower": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_layer_0": { "value": "jerk_topbottom", "minimum_value_warning": 20},
-        "jerk_print_layer_0": {"minimum_value_warning": 20 },
-        "jerk_travel_layer_0": {"minimum_value_warning": 20 },
-        "jerk_skirt_brim": {"minimum_value_warning": 20 },
         "layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" },
         "layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" },
         "layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" },
@@ -157,7 +143,6 @@
         "switch_extruder_prime_speed": { "value": "15" },
         "switch_extruder_retraction_amount": { "value": "8" },
         "top_bottom_thickness": { "value": "1" },
-        "travel_avoid_supports": { "value": "True" },
         "travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" },
         "wall_0_inset": { "value": "0" },
         "optimize_wall_printing_order": { "value": "True" },
diff --git a/resources/definitions/uni_base.def.json b/resources/definitions/uni_base.def.json
index 06ba86de2d..82b05f3366 100644
--- a/resources/definitions/uni_base.def.json
+++ b/resources/definitions/uni_base.def.json
@@ -138,7 +138,6 @@
         "machine_height":                    {"default_value": 250},
         "machine_extruder_count":            {"value": 2}, 
         "machine_buildplate_type":           {"value": "glass"},
-        "machine_heated_bed":                {"default_value": true},
         "machine_center_is_zero":            {"default_value": false},
         "machine_gcode_flavor":              {"default_value": "RepRap (Marlin/Sprinter)"},
         "machine_head_with_fans_polygon":    {"default_value": [
diff --git a/resources/definitions/zav_base.def.json b/resources/definitions/zav_base.def.json
index 1ef9398987..9f73419d46 100644
--- a/resources/definitions/zav_base.def.json
+++ b/resources/definitions/zav_base.def.json
@@ -147,7 +147,6 @@
         "machine_height":                    {"default_value": 270},
         "machine_extruder_count":            {"value": 1}, 
         "machine_buildplate_type":           {"value": "glass"},
-        "machine_heated_bed":                {"default_value": true},
         "machine_center_is_zero":            {"default_value": false},
         "machine_gcode_flavor":              {"default_value": "RepRap (Marlin/Sprinter)"},
         "machine_head_with_fans_polygon":    {"default_value": [