Update translation templates

These are the string changes that have been introduced for version 2.4.

1 files changed, 450 insertions, 24 deletions

diff --git a/resources/i18n/fdmprinter.def.json.pot b/resources/i18n/fdmprinter.def.json.pot
index d65b1a10de..a4e29bad33 100644
--- a/resources/i18n/fdmprinter.def.json.pot
+++ b/resources/i18n/fdmprinter.def.json.pot
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Uranium json setting files\n"
 "Report-Msgid-Bugs-To: http://github.com/ultimaker/uranium\n"
-"POT-Creation-Date: 2016-10-27 11:28+0000\n"
+"POT-Creation-Date: 2016-12-28 10:51+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE\n"
@@ -146,6 +146,27 @@ msgid "The depth (Y-direction) of the printable area."
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "machine_shape label"
+msgid "Build plate shape"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_shape description"
+msgid ""
+"The shape of the build plate without taking unprintable areas into account."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_shape option rectangular"
+msgid "Rectangular"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_shape option elliptic"
+msgid "Elliptic"
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "machine_height label"
 msgid "Machine height"
 msgstr ""
@@ -179,7 +200,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "machine_extruder_count label"
-msgid "Number extruders"
+msgid "Number of Extruders"
 msgstr ""
 
 #: fdmprinter.def.json
@@ -232,7 +253,19 @@ msgstr ""
 msgctxt "machine_heat_zone_length description"
 msgid ""
 "The distance from the tip of the nozzle in which heat from the nozzle is "
-"transfered to the filament."
+"transferred to the filament."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_filament_park_distance label"
+msgid "Filament Park Distance"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_filament_park_distance description"
+msgid ""
+"The distance from the tip of the nozzle where to park the filament when an "
+"extruder is no longer used."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -333,6 +366,16 @@ msgid "A list of polygons with areas the print head is not allowed to enter."
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "nozzle_disallowed_areas label"
+msgid "Nozzle Disallowed Areas"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "nozzle_disallowed_areas description"
+msgid "A list of polygons with areas the nozzle is not allowed to enter."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "machine_head_polygon label"
 msgid "Machine head polygon"
 msgstr ""
@@ -717,6 +760,18 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "wall_0_wipe_dist label"
+msgid "Outer Wall Wipe Distance"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_0_wipe_dist description"
+msgid ""
+"Distance of a travel move inserted after the outer wall, to hide the Z seam "
+"better."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "top_bottom_thickness label"
 msgid "Top/Bottom Thickness"
 msgstr ""
@@ -878,6 +933,26 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "fill_perimeter_gaps label"
+msgid "Fill Gaps Between Walls"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "fill_perimeter_gaps description"
+msgid "Fills the gaps between walls where no walls fit."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "fill_perimeter_gaps option nowhere"
+msgid "Nowhere"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "fill_perimeter_gaps option everywhere"
+msgid "Everywhere"
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "xy_offset label"
 msgid "Horizontal Expansion"
 msgstr ""
@@ -900,14 +975,14 @@ msgctxt "z_seam_type description"
 msgid ""
 "Starting point of each path in a layer. When paths in consecutive layers "
 "start at the same point a vertical seam may show on the print. When aligning "
-"these at the back, the seam is easiest to remove. When placed randomly the "
-"inaccuracies at the paths' start will be less noticeable. When taking the "
-"shortest path the print will be quicker."
+"these near a user specified location, the seam is easiest to remove. When "
+"placed randomly the inaccuracies at the paths' start will be less "
+"noticeable. When taking the shortest path the print will be quicker."
 msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "z_seam_type option back"
-msgid "Back"
+msgid "User Specified"
 msgstr ""
 
 #: fdmprinter.def.json
@@ -921,6 +996,30 @@ msgid "Random"
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "z_seam_x label"
+msgid "Z Seam X"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "z_seam_x description"
+msgid ""
+"The X coordinate of the position near where to start printing each part in a "
+"layer."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "z_seam_y label"
+msgid "Z Seam Y"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "z_seam_y description"
+msgid ""
+"The Y coordinate of the position near where to start printing each part in a "
+"layer."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "skin_no_small_gaps_heuristic label"
 msgid "Ignore Small Z Gaps"
 msgstr ""
@@ -1001,6 +1100,11 @@ msgid "Cubic"
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "infill_pattern option cubicsubdiv"
+msgid "Cubic Subdivision"
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "infill_pattern option tetrahedral"
 msgid "Tetrahedral"
 msgstr ""
@@ -1011,11 +1115,43 @@ msgid "Concentric"
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "infill_pattern option concentric_3d"
+msgid "Concentric 3D"
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "infill_pattern option zigzag"
 msgid "Zig Zag"
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "sub_div_rad_mult label"
+msgid "Cubic Subdivision Radius"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "sub_div_rad_mult description"
+msgid ""
+"A multiplier on the radius from the center of each cube to check for the "
+"boundary of the model, as to decide whether this cube should be subdivided. "
+"Larger values lead to more subdivisions, i.e. more small cubes."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "sub_div_rad_add label"
+msgid "Cubic Subdivision Shell"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "sub_div_rad_add description"
+msgid ""
+"An addition to the radius from the center of each cube to check for the "
+"boundary of the model, as to decide whether this cube should be subdivided. "
+"Larger values lead to a thicker shell of small cubes near the boundary of "
+"the model."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "infill_overlap label"
 msgid "Infill Overlap Percentage"
 msgstr ""
@@ -1149,6 +1285,19 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "default_material_print_temperature label"
+msgid "Default Printing Temperature"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "default_material_print_temperature description"
+msgid ""
+"The default temperature used for printing. This should be the \"base\" "
+"temperature of a material. All other print temperatures should use offsets "
+"based on this value"
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "material_print_temperature label"
 msgid "Printing Temperature"
 msgstr ""
@@ -1160,6 +1309,42 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "material_print_temperature_layer_0 label"
+msgid "Printing Temperature Initial Layer"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_print_temperature_layer_0 description"
+msgid ""
+"The temperature used for printing the first layer. Set at 0 to disable "
+"special handling of the initial layer."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_initial_print_temperature label"
+msgid "Initial Printing Temperature"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_initial_print_temperature description"
+msgid ""
+"The minimal temperature while heating up to the Printing Temperature at "
+"which printing can already start."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_final_print_temperature label"
+msgid "Final Printing Temperature"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_final_print_temperature description"
+msgid ""
+"The temperature to which to already start cooling down just before the end "
+"of printing."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "material_flow_temp_graph label"
 msgid "Flow Temperature Graph"
 msgstr ""
@@ -1196,6 +1381,16 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "material_bed_temperature_layer_0 label"
+msgid "Build Plate Temperature Initial Layer"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_bed_temperature_layer_0 description"
+msgid "The temperature used for the heated build plate at the first layer."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "material_diameter label"
 msgid "Diameter"
 msgstr ""
@@ -1231,6 +1426,16 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "retract_at_layer_change label"
+msgid "Retract at Layer Change"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "retract_at_layer_change description"
+msgid "Retract the filament when the nozzle is moving to the next layer."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "retraction_amount label"
 msgid "Retraction Distance"
 msgstr ""
@@ -1553,7 +1758,9 @@ msgstr ""
 msgctxt "speed_travel_layer_0 description"
 msgid ""
 "The speed of travel moves in the initial layer. A lower value is advised to "
-"prevent pulling previously printed parts away from the build plate."
+"prevent pulling previously printed parts away from the build plate. The "
+"value of this setting can automatically be calculated from the ratio between "
+"the Travel Speed and the Print Speed."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -1991,9 +2198,7 @@ msgid ""
 "results in slightly longer travel moves but reduces the need for "
 "retractions. If combing is off, the material will retract and the nozzle "
 "moves in a straight line to the next point. It is also possible to avoid "
-"combing over top/bottom skin areas by combing within the infill only. It is "
-"also possible to avoid combing over top/bottom skin areas by combing within "
-"the infill only."
+"combing over top/bottom skin areas by combing within the infill only."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -2013,7 +2218,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "travel_avoid_other_parts label"
-msgid "Avoid Printed Parts when Traveling"
+msgid "Avoid Printed Parts When Traveling"
 msgstr ""
 
 #: fdmprinter.def.json
@@ -2036,8 +2241,46 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "start_layers_at_same_position label"
+msgid "Start Layers with the Same Part"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "start_layers_at_same_position description"
+msgid ""
+"In each layer start with printing the object near the same point, so that we "
+"don't start a new layer with printing the piece which the previous layer "
+"ended with. This makes for better overhangs and small parts, but increases "
+"printing time."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "layer_start_x label"
+msgid "Layer Start X"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "layer_start_x description"
+msgid ""
+"The X coordinate of the position near where to find the part to start "
+"printing each layer."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "layer_start_y label"
+msgid "Layer Start Y"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "layer_start_y description"
+msgid ""
+"The Y coordinate of the position near where to find the part to start "
+"printing each layer."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "retraction_hop_enabled label"
-msgid "Z Hop when Retracted"
+msgid "Z Hop When Retracted"
 msgstr ""
 
 #: fdmprinter.def.json
@@ -2157,6 +2400,19 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "cool_fan_speed_0 label"
+msgid "Initial Fan Speed"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "cool_fan_speed_0 description"
+msgid ""
+"The speed at which the fans spin at the start of the print. In subsequent "
+"layers the fan speed is gradually increased up to the layer corresponding to "
+"Regular Fan Speed at Height."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "cool_fan_full_at_height label"
 msgid "Regular Fan Speed at Height"
 msgstr ""
@@ -2165,7 +2421,8 @@ msgstr ""
 msgctxt "cool_fan_full_at_height description"
 msgid ""
 "The height at which the fans spin on regular fan speed. At the layers below "
-"the fan speed gradually increases from zero to regular fan speed."
+"the fan speed gradually increases from Initial Fan Speed to Regular Fan "
+"Speed."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -2359,6 +2616,11 @@ msgid "Concentric"
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "support_pattern option concentric_3d"
+msgid "Concentric 3D"
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "support_pattern option zigzag"
 msgid "Zig Zag"
 msgstr ""
@@ -2636,6 +2898,11 @@ msgid "Concentric"
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "support_interface_pattern option concentric_3d"
+msgid "Concentric 3D"
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "support_interface_pattern option zigzag"
 msgid "Zig Zag"
 msgstr ""
@@ -2752,6 +3019,11 @@ msgid "Raft"
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "adhesion_type option none"
+msgid "None"
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "adhesion_extruder_nr label"
 msgid "Build Plate Adhesion Extruder"
 msgstr ""
@@ -3199,6 +3471,30 @@ msgid "The width of the prime tower."
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "prime_tower_min_volume label"
+msgid "Prime Tower Minimum Volume"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "prime_tower_min_volume description"
+msgid ""
+"The minimum volume for each layer of the prime tower in order to purge "
+"enough material."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "prime_tower_wall_thickness label"
+msgid "Prime Tower Thickness"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "prime_tower_wall_thickness description"
+msgid ""
+"The thickness of the hollow prime tower. A thickness larger than half the "
+"Prime Tower Minimum Volume will result in a dense prime tower."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "prime_tower_position_x label"
 msgid "Prime Tower X Position"
 msgstr ""
@@ -3232,7 +3528,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "prime_tower_wipe_enabled label"
-msgid "Wipe Nozzle on Prime Tower"
+msgid "Wipe Inactive Nozzle on Prime Tower"
 msgstr ""
 
 #: fdmprinter.def.json
@@ -3243,15 +3539,16 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "multiple_mesh_overlap label"
-msgid "Dual Extrusion Overlap"
+msgctxt "dual_pre_wipe label"
+msgid "Wipe Nozzle After Switch"
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "multiple_mesh_overlap description"
+msgctxt "dual_pre_wipe description"
 msgid ""
-"Make the models printed with different extruder trains overlap a bit. This "
-"makes the different materials bond together better."
+"After switching extruder, wipe the oozed material off of the nozzle on the "
+"first thing printed. This performs a safe slow wipe move at a place where "
+"the oozed material causes least harm to the surface quality of your print."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -3308,8 +3605,9 @@ msgstr ""
 #: fdmprinter.def.json
 msgctxt "meshfix_union_all description"
 msgid ""
-"Ignore the internal geometry arising from overlapping volumes and print the "
-"volumes as one. This may cause internal cavities to disappear."
+"Ignore the internal geometry arising from overlapping volumes within a mesh "
+"and print the volumes as one. This may cause unintended internal cavities to "
+"disappear."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -3353,6 +3651,18 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "multiple_mesh_overlap label"
+msgid "Merged Meshes Overlap"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "multiple_mesh_overlap description"
+msgid ""
+"Make meshes which are touching each other overlap a bit. This makes them "
+"bond together better."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "carve_multiple_volumes label"
 msgid "Remove Mesh Intersection"
 msgstr ""
@@ -3360,8 +3670,22 @@ msgstr ""
 #: fdmprinter.def.json
 msgctxt "carve_multiple_volumes description"
 msgid ""
-"Remove areas where multiple objecs are overlapping with each other. This is "
-"may be used if merged dual material objects overlap with each other."
+"Remove areas where multiple meshes are overlapping with each other. This may "
+"be used if merged dual material objects overlap with each other."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "alternate_carve_order label"
+msgid "Alternate Mesh Removal"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "alternate_carve_order description"
+msgid ""
+"Switch to which mesh intersecting volumes will belong with every layer, so "
+"that the overlapping meshes become interwoven. Turning this setting off will "
+"cause one of the meshes to obtain all of the volume in the overlap, while it "
+"is removed from the other meshes."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -3426,6 +3750,30 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "support_mesh label"
+msgid "Support Mesh"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_mesh description"
+msgid ""
+"Use this mesh to specify support areas. This can be used to generate support "
+"structure."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "anti_overhang_mesh label"
+msgid "Anti Overhang Mesh"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "anti_overhang_mesh description"
+msgid ""
+"Use this mesh to specify where no part of the model should be detected as "
+"overhang. This can be used to remove unwanted support structure."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "magic_mesh_surface_mode label"
 msgid "Surface Mode"
 msgstr ""
@@ -3678,6 +4026,17 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "infill_hollow label"
+msgid "Hollow Out Objects"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "infill_hollow description"
+msgid ""
+"Remove all infill and make the inside of the object eligible for support."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "magic_fuzzy_skin_enabled label"
 msgid "Fuzzy Skin"
 msgstr ""
@@ -4040,3 +4399,70 @@ msgid ""
 "which in turn results in less upward connections with the next layer. Only "
 "applies to Wire Printing."
 msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "command_line_settings label"
+msgid "Command Line Settings"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "command_line_settings description"
+msgid ""
+"Settings which are only used if CuraEngine isn't called from the Cura "
+"frontend."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "center_object label"
+msgid "Center object"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "center_object description"
+msgid ""
+"Whether to center the object on the middle of the build platform (0,0), "
+"instead of using the coordinate system in which the object was saved."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "mesh_position_x label"
+msgid "Mesh position x"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "mesh_position_x description"
+msgid "Offset applied to the object in the x direction."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "mesh_position_y label"
+msgid "Mesh position y"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "mesh_position_y description"
+msgid "Offset applied to the object in the y direction."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "mesh_position_z label"
+msgid "Mesh position z"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "mesh_position_z description"
+msgid ""
+"Offset applied to the object in the z direction. With this you can perform "
+"what was used to be called 'Object Sink'."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "mesh_rotation_matrix label"
+msgid "Mesh Rotation Matrix"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "mesh_rotation_matrix description"
+msgid ""
+"Transformation matrix to be applied to the model when loading it from file."
+msgstr ""