Update translation templates per language for Cura 4.24.2-beta

These files will get sent out to the translators.

Contributes to issue CURA-6663.

3 files changed, 792 insertions, 511 deletions

diff --git a/resources/i18n/fi_FI/cura.po b/resources/i18n/fi_FI/cura.po
index f1884abf56..6acbd51266 100644
--- a/resources/i18n/fi_FI/cura.po
+++ b/resources/i18n/fi_FI/cura.po
@@ -6,8 +6,8 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.1\n"
-"Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2019-05-14 12:48+0200\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2019-07-16 14:38+0200\n"
 "PO-Revision-Date: 2017-09-27 12:27+0200\n"
 "Last-Translator: Bothof <info@bothof.nl>\n"
 "Language-Team: Finnish\n"
@@ -79,6 +79,11 @@ msgctxt "@info:status"
 msgid "Profile has been flattened & activated."
 msgstr "Profiili on tasoitettu ja aktivoitu."
 
+#: /home/ruben/Projects/Cura/plugins/AMFReader/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "AMF File"
+msgstr ""
+
 #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:37
 msgctxt "@item:inmenu"
 msgid "USB printing"
@@ -104,12 +109,6 @@ msgctxt "@label"
 msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/X3GWriter/build/install/X3GWriter/__init__.py:15
-#: /home/ruben/Projects/Cura/plugins/X3GWriter/__init__.py:15
-msgctxt "X3G Writer File Description"
-msgid "X3G File"
-msgstr "X3G-tiedosto"
-
 #: /home/ruben/Projects/Cura/plugins/X3GWriter/build/GPX-prefix/src/GPX/slicerplugins/cura15.06/X3gWriter/__init__.py:16
 msgctxt "X3g Writer Plugin Description"
 msgid "Writes X3g to files"
@@ -120,6 +119,11 @@ msgctxt "X3g Writer File Description"
 msgid "X3g File"
 msgstr ""
 
+#: /home/ruben/Projects/Cura/plugins/X3GWriter/__init__.py:15
+msgctxt "X3G Writer File Description"
+msgid "X3G File"
+msgstr "X3G-tiedosto"
+
 #: /home/ruben/Projects/Cura/plugins/GCodeGzWriter/__init__.py:17
 #: /home/ruben/Projects/Cura/plugins/GCodeGzReader/__init__.py:17
 msgctxt "@item:inlistbox"
@@ -192,9 +196,9 @@ msgstr "Ei voitu tallentaa siirrettävälle asemalle {0}: {1}"
 
 #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:137
 #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:188
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:133
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:140
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:1620
+#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:134
+#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:141
+#: /home/ruben/Projects/Cura/cura/CuraApplication.py:1622
 msgctxt "@info:title"
 msgid "Error"
 msgstr "Virhe"
@@ -224,8 +228,8 @@ msgstr "Poista siirrettävä asema {0}"
 #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
 #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
 #: /home/ruben/Projects/Cura/cura/OAuth2/AuthorizationService.py:197
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:1610
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:1710
+#: /home/ruben/Projects/Cura/cura/CuraApplication.py:1612
+#: /home/ruben/Projects/Cura/cura/CuraApplication.py:1712
 msgctxt "@info:title"
 msgid "Warning"
 msgstr "Varoitus"
@@ -356,39 +360,39 @@ msgid "There is a mismatch between the configuration or calibration of the print
 msgstr "Tulostimen ja Curan määrityksen tai kalibroinnin välillä on ristiriita. Parhaat tulokset saavutetaan viipaloimalla aina tulostimeen asetetuille PrintCoreille ja materiaaleille."
 
 #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/LegacyUM3OutputDevice.py:259
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/ClusterUM3OutputDevice.py:171
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:185
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/ClusterUM3OutputDevice.py:176
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:181
 msgctxt "@info:status"
 msgid "Sending new jobs (temporarily) blocked, still sending the previous print job."
 msgstr "Uusien töiden lähettäminen (tilapäisesti) estetty, edellistä tulostustyötä lähetetään vielä."
 
 #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/LegacyUM3OutputDevice.py:266
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/ClusterUM3OutputDevice.py:189
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/ClusterUM3OutputDevice.py:206
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/ClusterUM3OutputDevice.py:194
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/ClusterUM3OutputDevice.py:211
 msgctxt "@info:status"
 msgid "Sending data to printer"
 msgstr "Lähetetään tietoja tulostimeen"
 
 #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/LegacyUM3OutputDevice.py:267
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/ClusterUM3OutputDevice.py:191
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/ClusterUM3OutputDevice.py:208
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/ClusterUM3OutputDevice.py:196
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/ClusterUM3OutputDevice.py:213
 msgctxt "@info:title"
 msgid "Sending Data"
 msgstr "Lähetetään tietoja"
 
 #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/LegacyUM3OutputDevice.py:268
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/ClusterUM3OutputDevice.py:209
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/ClusterUM3OutputDevice.py:214
 #: /home/ruben/Projects/Cura/cura/UI/AddPrinterPagesModel.py:18
 #: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/ToolboxProgressButton.qml:19
 #: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/ToolboxConfirmUninstallResetDialog.qml:81
 #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:410
 #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:20
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:38
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
 #: /home/ruben/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:149
 #: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:188
 #: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:391
 #: /home/ruben/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:87
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:272
+#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:283
 msgctxt "@action:button"
 msgid "Cancel"
 msgstr "Peruuta"
@@ -437,82 +441,82 @@ msgctxt "@info:status"
 msgid "Connected over the network"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/ClusterUM3OutputDevice.py:284
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:369
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/ClusterUM3OutputDevice.py:289
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:370
 msgctxt "@info:status"
 msgid "Print job was successfully sent to the printer."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/ClusterUM3OutputDevice.py:286
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:370
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/ClusterUM3OutputDevice.py:291
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:371
 msgctxt "@info:title"
 msgid "Data Sent"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/ClusterUM3OutputDevice.py:287
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/ClusterUM3OutputDevice.py:292
 msgctxt "@action:button"
 msgid "View in Monitor"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/ClusterUM3OutputDevice.py:399
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:317
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/ClusterUM3OutputDevice.py:411
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:318
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Printer '{printer_name}' has finished printing '{job_name}'."
 msgstr "{printer_name} on tulostanut työn '{job_name}'."
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/ClusterUM3OutputDevice.py:401
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:321
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/ClusterUM3OutputDevice.py:413
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:322
 #, python-brace-format
 msgctxt "@info:status"
 msgid "The print job '{job_name}' was finished."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/ClusterUM3OutputDevice.py:402
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/ClusterUM3OutputDevice.py:414
 #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:316
 msgctxt "@info:status"
 msgid "Print finished"
 msgstr "Tulosta valmis"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/ClusterUM3OutputDevice.py:583
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/ClusterUM3OutputDevice.py:617
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/ClusterUM3OutputDevice.py:595
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/ClusterUM3OutputDevice.py:629
 msgctxt "@label:material"
 msgid "Empty"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/ClusterUM3OutputDevice.py:584
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/ClusterUM3OutputDevice.py:618
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/ClusterUM3OutputDevice.py:596
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/ClusterUM3OutputDevice.py:630
 msgctxt "@label:material"
 msgid "Unknown"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:174
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:169
 msgctxt "@action:button"
 msgid "Print via Cloud"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:175
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:170
 msgctxt "@properties:tooltip"
 msgid "Print via Cloud"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:176
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:171
 msgctxt "@info:status"
 msgid "Connected via Cloud"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:186
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:358
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:182
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:359
 msgctxt "@info:title"
 msgid "Cloud error"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:203
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:199
 msgctxt "@info:status"
 msgid "Could not export print job."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:357
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:358
 msgctxt "@info:text"
 msgid "Could not upload the data to the printer."
 msgstr ""
@@ -542,37 +546,37 @@ msgctxt "@info:status"
 msgid "Uploading via Ultimaker Cloud"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/UM3OutputDevicePlugin.py:624
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/UM3OutputDevicePlugin.py:621
 msgctxt "@info:status"
 msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/UM3OutputDevicePlugin.py:630
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/UM3OutputDevicePlugin.py:627
 msgctxt "@info:status Ultimaker Cloud is a brand name and shouldn't be translated."
 msgid "Connect to Ultimaker Cloud"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/UM3OutputDevicePlugin.py:631
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/UM3OutputDevicePlugin.py:628
 msgctxt "@action"
 msgid "Don't ask me again for this printer."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/UM3OutputDevicePlugin.py:634
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/UM3OutputDevicePlugin.py:631
 msgctxt "@action"
 msgid "Get started"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/UM3OutputDevicePlugin.py:640
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/UM3OutputDevicePlugin.py:637
 msgctxt "@info:status"
 msgid "You can now send and monitor print jobs from anywhere using your Ultimaker account."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/UM3OutputDevicePlugin.py:646
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/UM3OutputDevicePlugin.py:643
 msgctxt "@info:status"
 msgid "Connected!"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/UM3OutputDevicePlugin.py:648
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/UM3OutputDevicePlugin.py:645
 msgctxt "@action"
 msgid "Review your connection"
 msgstr ""
@@ -582,11 +586,6 @@ msgctxt "@action"
 msgid "Connect via Network"
 msgstr "Yhdistä verkon kautta"
 
-#: /home/ruben/Projects/Cura/plugins/SettingsGuide/__init__.py:16
-msgctxt "@item:inmenu"
-msgid "Cura Settings Guide"
-msgstr ""
-
 #: /home/ruben/Projects/Cura/plugins/MonitorStage/__init__.py:14
 msgctxt "@item:inmenu"
 msgid "Monitor"
@@ -760,18 +759,18 @@ msgid "3MF File"
 msgstr "3MF-tiedosto"
 
 #: /home/ruben/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:191
-#: /home/ruben/Projects/Cura/cura/Settings/MachineManager.py:772
+#: /home/ruben/Projects/Cura/cura/Settings/MachineManager.py:775
 msgctxt "@label"
 msgid "Nozzle"
 msgstr "Suutin"
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:470
+#: /home/ruben/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:474
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:473
+#: /home/ruben/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:477
 msgctxt "@info:title"
 msgid "Open Project File"
 msgstr ""
@@ -903,13 +902,13 @@ msgid "Not supported"
 msgstr ""
 
 #: /home/ruben/Projects/Cura/cura/Settings/ContainerManager.py:203
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:121
+#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:122
 msgctxt "@title:window"
 msgid "File Already Exists"
 msgstr "Tiedosto on jo olemassa"
 
 #: /home/ruben/Projects/Cura/cura/Settings/ContainerManager.py:204
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:122
+#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:123
 #, python-brace-format
 msgctxt "@label Don't translate the XML tag <filename>!"
 msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
@@ -921,117 +920,116 @@ msgctxt "@info:status"
 msgid "Invalid file URL:"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Settings/MachineManager.py:924
-#, python-format
-msgctxt "@info:generic"
-msgid "Settings have been changed to match the current availability of extruders: [%s]"
+#: /home/ruben/Projects/Cura/cura/Settings/MachineManager.py:925
+msgctxt "@info:message Followed by a list of settings."
+msgid "Settings have been changed to match the current availability of extruders:"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Settings/MachineManager.py:926
+#: /home/ruben/Projects/Cura/cura/Settings/MachineManager.py:927
 msgctxt "@info:title"
 msgid "Settings updated"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Settings/MachineManager.py:1468
+#: /home/ruben/Projects/Cura/cura/Settings/MachineManager.py:1481
 msgctxt "@info:title"
 msgid "Extruder(s) Disabled"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:131
+#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:132
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "Profiilin vienti epäonnistui tiedostoon <filename>{0}</filename>: <message>{1}</message>"
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:138
+#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:139
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
 msgstr "Profiilin vienti epäonnistui tiedostoon <filename>{0}</filename>: Kirjoitin-lisäosa ilmoitti virheestä."
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:143
+#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:144
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Exported profile to <filename>{0}</filename>"
 msgstr "Profiili viety tiedostoon <filename>{0}</filename>"
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:144
+#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:145
 msgctxt "@info:title"
 msgid "Export succeeded"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:170
+#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:172
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>: {1}"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:177
+#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:176
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:190
+#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:192
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "No custom profile to import in file <filename>{0}</filename>"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:194
+#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:196
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:218
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:228
+#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:220
+#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:230
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:241
+#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:243
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "The machine defined in profile <filename>{0}</filename> ({1}) doesn't match with your current machine ({2}), could not import it."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:313
+#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:315
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:316
+#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:318
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Successfully imported profile {0}"
 msgstr "Onnistuneesti tuotu profiili {0}"
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:319
+#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:321
 #, python-brace-format
 msgctxt "@info:status"
 msgid "File {0} does not contain any valid profile."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:322
+#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:324
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Profile {0} has an unknown file type or is corrupted."
 msgstr "Profiililla {0} on tuntematon tiedostotyyppi tai se on vioittunut."
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:357
+#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:359
 msgctxt "@label"
 msgid "Custom profile"
 msgstr "Mukautettu profiili"
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:373
+#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:375
 msgctxt "@info:status"
 msgid "Profile is missing a quality type."
 msgstr "Profiilista puuttuu laatutyyppi."
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:387
+#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:389
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Could not find a quality type {0} for the current configuration."
@@ -1109,7 +1107,7 @@ msgctxt "@action:button"
 msgid "Next"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/UI/ObjectsModel.py:73
+#: /home/ruben/Projects/Cura/cura/UI/ObjectsModel.py:61
 #, python-brace-format
 msgctxt "@label"
 msgid "Group #{group_nr}"
@@ -1120,7 +1118,7 @@ msgstr ""
 #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/UM3InfoComponents.qml:85
 #: /home/ruben/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
 #: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:508
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:120
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:124
 #: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:168
 msgctxt "@action:button"
 msgid "Close"
@@ -1128,7 +1126,7 @@ msgstr "Sulje"
 
 #: /home/ruben/Projects/Cura/cura/UI/AddPrinterPagesModel.py:17
 #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:91
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:46
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:48
 msgctxt "@action:button"
 msgid "Add"
 msgstr "Lisää"
@@ -1149,20 +1147,20 @@ msgctxt "@item:inlistbox"
 msgid "All Files (*)"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:78
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/ToolboxDetailPage.qml:181
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/ToolboxDetailPage.qml:222
+#: /home/ruben/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:86
+#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/ToolboxDetailPage.qml:182
+#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/ToolboxDetailPage.qml:223
 #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:269
 msgctxt "@label"
 msgid "Unknown"
 msgstr "Tuntematon"
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:102
+#: /home/ruben/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:116
 msgctxt "@label"
 msgid "The printer(s) below cannot be connected because they are part of a group"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:104
+#: /home/ruben/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:118
 msgctxt "@label"
 msgid "Available networked printers"
 msgstr ""
@@ -1178,12 +1176,12 @@ msgctxt "@label"
 msgid "Custom"
 msgstr "Mukautettu"
 
-#: /home/ruben/Projects/Cura/cura/BuildVolume.py:81
+#: /home/ruben/Projects/Cura/cura/BuildVolume.py:89
 msgctxt "@info:status"
 msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
 msgstr "Tulostustilavuuden korkeutta on vähennetty tulostusjärjestysasetuksen vuoksi, jotta koroke ei osuisi tulostettuihin malleihin."
 
-#: /home/ruben/Projects/Cura/cura/BuildVolume.py:83
+#: /home/ruben/Projects/Cura/cura/BuildVolume.py:91
 msgctxt "@info:title"
 msgid "Build Volume"
 msgstr "Tulostustilavuus"
@@ -1381,48 +1379,48 @@ msgstr ""
 
 #: /home/ruben/Projects/Cura/cura/CrashHandler.py:322
 msgctxt "@title:groupbox"
-msgid "User description"
+msgid "User description (Note: Developers may not speak your language, please use English if possible)"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:341
+#: /home/ruben/Projects/Cura/cura/CrashHandler.py:342
 msgctxt "@action:button"
 msgid "Send report"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:503
+#: /home/ruben/Projects/Cura/cura/CuraApplication.py:504
 msgctxt "@info:progress"
 msgid "Loading machines..."
 msgstr "Ladataan laitteita..."
 
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:817
+#: /home/ruben/Projects/Cura/cura/CuraApplication.py:819
 msgctxt "@info:progress"
 msgid "Setting up scene..."
 msgstr "Asetetaan näkymää..."
 
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:853
+#: /home/ruben/Projects/Cura/cura/CuraApplication.py:854
 msgctxt "@info:progress"
 msgid "Loading interface..."
 msgstr "Ladataan käyttöliittymää..."
 
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:1131
+#: /home/ruben/Projects/Cura/cura/CuraApplication.py:1133
 #, python-format
 msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
 msgid "%(width).1f x %(depth).1f x %(height).1f mm"
 msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
 
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:1609
+#: /home/ruben/Projects/Cura/cura/CuraApplication.py:1611
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
 msgstr "Vain yksi G-code-tiedosto voidaan ladata kerralla. Tiedoston {0} tuonti ohitettiin."
 
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:1619
+#: /home/ruben/Projects/Cura/cura/CuraApplication.py:1621
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
 msgstr "Muita tiedostoja ei voida ladata, kun G-code latautuu. Tiedoston {0} tuonti ohitettiin."
 
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:1709
+#: /home/ruben/Projects/Cura/cura/CuraApplication.py:1711
 msgctxt "@info:status"
 msgid "The selected model was too small to load."
 msgstr ""
@@ -1432,98 +1430,98 @@ msgctxt "@title:label"
 msgid "Printer Settings"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
+#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:72
 msgctxt "@label"
 msgid "X (Width)"
 msgstr "X (leveys)"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:88
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:102
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:190
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:208
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:226
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:246
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:264
+#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:76
+#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:90
+#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
+#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:194
+#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:213
+#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:232
+#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:253
+#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:272
 #: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
 #: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
 #: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:123
+#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
 msgctxt "@label"
 msgid "mm"
 msgstr "mm"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:84
+#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:86
 msgctxt "@label"
 msgid "Y (Depth)"
 msgstr "Y (syvyys)"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:98
+#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
 msgctxt "@label"
 msgid "Z (Height)"
 msgstr "Z (korkeus)"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:112
+#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
 msgctxt "@label"
 msgid "Build plate shape"
 msgstr "Alustan muoto"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:125
+#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
 msgctxt "@label"
 msgid "Origin at center"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:137
+#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
 msgctxt "@label"
 msgid "Heated bed"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:149
+#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
 msgctxt "@label"
 msgid "G-code flavor"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:174
+#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:176
 msgctxt "@title:label"
 msgid "Printhead Settings"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:186
+#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:190
 msgctxt "@label"
 msgid "X min"
 msgstr "X väh."
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:204
+#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:209
 msgctxt "@label"
 msgid "Y min"
 msgstr "Y väh."
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:222
+#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:228
 msgctxt "@label"
 msgid "X max"
 msgstr "X enint."
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:242
+#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:249
 msgctxt "@label"
 msgid "Y max"
 msgstr "Y enint."
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:260
+#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:268
 msgctxt "@label"
 msgid "Gantry Height"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:274
+#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:282
 msgctxt "@label"
 msgid "Number of Extruders"
 msgstr "Suulakkeiden määrä"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:333
+#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:341
 msgctxt "@title:label"
 msgid "Start G-code"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:347
+#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:355
 msgctxt "@title:label"
 msgid "End G-code"
 msgstr ""
@@ -1553,22 +1551,22 @@ msgctxt "@label"
 msgid "Nozzle offset X"
 msgstr "Suuttimen X-siirtymä"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:119
+#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
 msgctxt "@label"
 msgid "Nozzle offset Y"
 msgstr "Suuttimen Y-siirtymä"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:133
+#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
 msgctxt "@label"
 msgid "Cooling Fan Number"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:160
+#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:162
 msgctxt "@title:label"
 msgid "Extruder Start G-code"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:174
+#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:176
 msgctxt "@title:label"
 msgid "Extruder End G-code"
 msgstr ""
@@ -1579,7 +1577,7 @@ msgid "Install"
 msgstr ""
 
 #: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/ToolboxProgressButton.qml:20
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/ToolboxDetailTileActions.qml:45
+#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/ToolboxDetailTileActions.qml:46
 msgctxt "@action:button"
 msgid "Installed"
 msgstr "Asennettu"
@@ -1602,8 +1600,8 @@ msgstr ""
 
 #: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/ToolboxInstalledPage.qml:70
 #: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/ToolboxHeader.qml:44
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:66
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:413
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:80
+#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:417
 msgctxt "@title:tab"
 msgid "Materials"
 msgstr "Materiaalit"
@@ -1613,49 +1611,49 @@ msgctxt "@label"
 msgid "Your rating"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/ToolboxDetailPage.qml:98
+#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/ToolboxDetailPage.qml:99
 msgctxt "@label"
 msgid "Version"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/ToolboxDetailPage.qml:105
+#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/ToolboxDetailPage.qml:106
 msgctxt "@label"
 msgid "Last updated"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/ToolboxDetailPage.qml:112
+#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/ToolboxDetailPage.qml:113
 msgctxt "@label"
 msgid "Author"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/ToolboxDetailPage.qml:119
+#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/ToolboxDetailPage.qml:120
 msgctxt "@label"
 msgid "Downloads"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/ToolboxDetailTileActions.qml:55
+#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/ToolboxDetailTileActions.qml:56
 msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
 msgid "<a href='%1'>Log in</a> is required to install or update"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/ToolboxDetailTileActions.qml:79
+#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/ToolboxDetailTileActions.qml:80
 msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
 msgid "<a href='%1'>Buy material spools</a>"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/ToolboxDetailTileActions.qml:95
+#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/ToolboxDetailTileActions.qml:96
 #: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/ToolboxInstalledTileActions.qml:34
 msgctxt "@action:button"
 msgid "Update"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/ToolboxDetailTileActions.qml:96
+#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/ToolboxDetailTileActions.qml:97
 #: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/ToolboxInstalledTileActions.qml:35
 msgctxt "@action:button"
 msgid "Updating"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/ToolboxDetailTileActions.qml:97
+#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/ToolboxDetailTileActions.qml:98
 #: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/ToolboxInstalledTileActions.qml:36
 msgctxt "@action:button"
 msgid "Updated"
@@ -1905,69 +1903,69 @@ msgid "Firmware update failed due to missing firmware."
 msgstr "Laiteohjelmiston päivitys epäonnistui puuttuvan laiteohjelmiston takia."
 
 #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:144
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:185
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:133
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:181
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
 msgctxt "@label"
 msgid "Glass"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:209
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:253
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:208
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:249
 msgctxt "@info"
-msgid "These options are not available because you are monitoring a cloud printer."
+msgid "Please update your printer's firmware to manage the queue remotely."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:242
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:241
 msgctxt "@info"
 msgid "The webcam is not available because you are monitoring a cloud printer."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:302
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:300
 msgctxt "@label:status"
 msgid "Loading..."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:306
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:304
 msgctxt "@label:status"
 msgid "Unavailable"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:310
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:308
 msgctxt "@label:status"
 msgid "Unreachable"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:314
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:312
 msgctxt "@label:status"
 msgid "Idle"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:355
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:353
 msgctxt "@label"
 msgid "Untitled"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:376
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:374
 msgctxt "@label"
 msgid "Anonymous"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:403
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:401
 msgctxt "@label:status"
 msgid "Requires configuration changes"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:441
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:439
 msgctxt "@action:button"
 msgid "Details"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:134
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:130
 msgctxt "@label"
 msgid "Unavailable printer"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:136
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:132
 msgctxt "@label"
 msgid "First available"
 msgstr ""
@@ -1977,36 +1975,31 @@ msgctxt "@label"
 msgid "Queued"
 msgstr "Jonossa"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:68
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:67
 msgctxt "@label link to connect manager"
-msgid "Go to Cura Connect"
+msgid "Manage in browser"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:103
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:100
+msgctxt "@label"
+msgid "There are no print jobs in the queue. Slice and send a job to add one."
+msgstr ""
+
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:116
 msgctxt "@label"
 msgid "Print jobs"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:118
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:132
 msgctxt "@label"
 msgid "Total print time"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:133
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:148
 msgctxt "@label"
 msgid "Waiting for"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:217
-msgctxt "@info"
-msgid "All jobs are printed."
-msgstr ""
-
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:252
-msgctxt "@label link to connect manager"
-msgid "View print history"
-msgstr ""
-
 #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:50
 msgctxt "@window:title"
 msgid "Existing Connection"
@@ -2024,14 +2017,13 @@ msgstr "Yhdistä verkkotulostimeen"
 
 #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:81
 msgctxt "@label"
-msgid ""
-"To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer.\n"
-"\n"
-"Select your printer from the list below:"
+msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
+msgstr ""
+
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:81
+msgctxt "@label"
+msgid "Select your printer from the list below:"
 msgstr ""
-"Tulosta suoraan tulostimeen verkon kautta yhdistämällä tulostin verkkoon verkkokaapelilla tai yhdistämällä tulostin Wi-Fi-verkkoon. Jos Curaa ei yhdistetä tulostimeen, GCode-tiedostot voidaan silti siirtää tulostimeen USB-aseman avulla.\n"
-"\n"
-"Valitse tulostin alla olevasta luettelosta:"
 
 #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:101
 msgctxt "@action:button"
@@ -2039,9 +2031,9 @@ msgid "Edit"
 msgstr "Muokkaa"
 
 #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:112
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:128
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:52
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:117
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:146
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:55
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:121
 msgctxt "@action:button"
 msgid "Remove"
 msgstr "Poista"
@@ -2124,50 +2116,50 @@ msgctxt "@action:button"
 msgid "OK"
 msgstr "OK"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:73
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:85
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
 msgctxt "@label:status"
 msgid "Aborted"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:75
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:77
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
 msgctxt "@label:status"
 msgid "Finished"
 msgstr "Valmis"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:79
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:81
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
 msgctxt "@label:status"
 msgid "Preparing..."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:83
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
 msgctxt "@label:status"
 msgid "Aborting..."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:87
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
 msgctxt "@label:status"
 msgid "Pausing..."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:89
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
 msgctxt "@label:status"
 msgid "Paused"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:91
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
 msgctxt "@label:status"
 msgid "Resuming..."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:93
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
 msgctxt "@label:status"
 msgid "Action required"
 msgstr "Vaatii toimenpiteitä"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:95
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
 msgctxt "@label:status"
 msgid "Finishes %1 at %2"
 msgstr ""
@@ -2271,44 +2263,44 @@ msgctxt "@action:button"
 msgid "Override"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:65
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
 msgctxt "@label"
 msgid "The assigned printer, %1, requires the following configuration change:"
 msgid_plural "The assigned printer, %1, requires the following configuration changes:"
 msgstr[0] ""
 msgstr[1] ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:69
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
 msgctxt "@label"
 msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:79
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
 msgctxt "@label"
 msgid "Change material %1 from %2 to %3."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:82
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
 msgctxt "@label"
 msgid "Load %3 as material %1 (This cannot be overridden)."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
 msgctxt "@label"
 msgid "Change print core %1 from %2 to %3."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:88
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
 msgctxt "@label"
 msgid "Change build plate to %1 (This cannot be overridden)."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:95
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
 msgctxt "@label"
 msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:136
+#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
 msgctxt "@label"
 msgid "Aluminum"
 msgstr ""
@@ -2318,7 +2310,7 @@ msgctxt "@info:tooltip"
 msgid "Connect to a printer"
 msgstr "Yhdistä tulostimeen"
 
-#: /home/ruben/Projects/Cura/plugins/SettingsGuide/resources/qml/SettingsGuide.qml:17
+#: /home/ruben/Projects/Cura/plugins/SettingsGuide/resources/qml/SettingsGuide.qml:16
 msgctxt "@title"
 msgid "Cura Settings Guide"
 msgstr ""
@@ -2328,7 +2320,8 @@ msgctxt "@info"
 msgid ""
 "Please make sure your printer has a connection:\n"
 "- Check if the printer is turned on.\n"
-"- Check if the printer is connected to the network."
+"- Check if the printer is connected to the network.\n"
+"- Check if you are signed in to discover cloud-connected printers."
 msgstr ""
 
 #: /home/ruben/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:117
@@ -2641,7 +2634,7 @@ msgid "Printer Group"
 msgstr ""
 
 #: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:180
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:215
+#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
 msgctxt "@action:label"
 msgid "Profile settings"
 msgstr "Profiilin asetukset"
@@ -2654,19 +2647,19 @@ msgstr "Miten profiilin ristiriita pitäisi ratkaista?"
 #: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:216
 #: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:308
 #: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:121
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:239
+#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:250
 msgctxt "@action:label"
 msgid "Name"
 msgstr "Nimi"
 
 #: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:231
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:223
+#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:234
 msgctxt "@action:label"
 msgid "Not in profile"
 msgstr "Ei profiilissa"
 
 #: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:236
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:228
+#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:239
 msgctxt "@action:label"
 msgid "%1 override"
 msgid_plural "%1 overrides"
@@ -2838,18 +2831,24 @@ msgid "Previous"
 msgstr ""
 
 #: /home/ruben/Projects/Cura/plugins/CuraPrintProfileCreator/components/ProfileCreatorTabControls.qml:60
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:154
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:152
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:174
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:159
 msgctxt "@action:button"
 msgid "Export"
 msgstr "Vie"
 
-#: /home/ruben/Projects/Cura/plugins/CuraPrintProfileCreator/components/ProfileCreatorPageCategoryView.qml:169
+#: /home/ruben/Projects/Cura/plugins/CuraPrintProfileCreator/components/ProfileCreatorPageCategoryView.qml:209
 msgctxt "@label"
 msgid "Tip"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraPrintProfileCreator/components/ProfileCreatorPage.qml:156
+#: /home/ruben/Projects/Cura/plugins/CuraPrintProfileCreator/components/ProfileCreatorMaterialMenu.qml:20
+#: /home/ruben/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:66
+msgctxt "@label:category menu label"
+msgid "Generic"
+msgstr ""
+
+#: /home/ruben/Projects/Cura/plugins/CuraPrintProfileCreator/components/ProfileCreatorPage.qml:160
 msgctxt "@label"
 msgid "Print experiment"
 msgstr ""
@@ -2954,170 +2953,170 @@ msgctxt "@label"
 msgid "Are you sure you want to abort the print?"
 msgstr "Haluatko varmasti keskeyttää tulostuksen?"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:71
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:73
 msgctxt "@title"
 msgid "Information"
 msgstr "Tiedot"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:100
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
 msgctxt "@title:window"
 msgid "Confirm Diameter Change"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:103
 msgctxt "@label (%1 is a number)"
 msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:133
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:127
 msgctxt "@label"
 msgid "Display Name"
 msgstr "Näytä nimi"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:143
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:137
 msgctxt "@label"
 msgid "Brand"
 msgstr "Merkki"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:153
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:147
 msgctxt "@label"
 msgid "Material Type"
 msgstr "Materiaalin tyyppi"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:163
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:157
 msgctxt "@label"
 msgid "Color"
 msgstr "Väri"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:213
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:207
 msgctxt "@label"
 msgid "Properties"
 msgstr "Ominaisuudet"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:215
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:209
 msgctxt "@label"
 msgid "Density"
 msgstr "Tiheys"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:230
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:224
 msgctxt "@label"
 msgid "Diameter"
 msgstr "Läpimitta"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:264
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:258
 msgctxt "@label"
 msgid "Filament Cost"
 msgstr "Tulostuslangan hinta"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:281
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:275
 msgctxt "@label"
 msgid "Filament weight"
 msgstr "Tulostuslangan paino"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:299
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:293
 msgctxt "@label"
 msgid "Filament length"
 msgstr "Tulostuslangan pituus"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:308
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:302
 msgctxt "@label"
 msgid "Cost per Meter"
 msgstr "Hinta metriä kohden"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:322
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:316
 msgctxt "@label"
 msgid "This material is linked to %1 and shares some of its properties."
 msgstr "Materiaali on linkitetty kohteeseen %1 ja niillä on joitain samoja ominaisuuksia."
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:329
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:323
 msgctxt "@label"
 msgid "Unlink Material"
 msgstr "Poista materiaalin linkitys"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:340
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:334
 msgctxt "@label"
 msgid "Description"
 msgstr "Kuvaus"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:353
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:347
 msgctxt "@label"
 msgid "Adhesion Information"
 msgstr "Tarttuvuustiedot"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:379
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:373
 #: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
 msgctxt "@label"
 msgid "Print settings"
 msgstr "Tulostusasetukset"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:84
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:39
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:72
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:99
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:40
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:73
 msgctxt "@action:button"
 msgid "Activate"
 msgstr "Aktivoi"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:101
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:117
 msgctxt "@action:button"
 msgid "Create"
 msgstr "Luo"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:114
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:131
 msgctxt "@action:button"
 msgid "Duplicate"
 msgstr "Jäljennös"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:142
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:160
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:148
 msgctxt "@action:button"
 msgid "Import"
 msgstr "Tuo"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:203
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:223
 msgctxt "@action:label"
 msgid "Printer"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:262
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:246
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:287
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:253
 msgctxt "@title:window"
 msgid "Confirm Remove"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:263
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:247
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:290
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:254
 msgctxt "@label (%1 is object name)"
 msgid "Are you sure you wish to remove %1? This cannot be undone!"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:277
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:285
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:304
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:312
 msgctxt "@title:window"
 msgid "Import Material"
 msgstr "Tuo materiaali"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:286
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:313
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
 msgstr "Materiaalin tuominen epäonnistui: <filename>%1</filename>: <message>%2</message>"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:290
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:317
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Successfully imported material <filename>%1</filename>"
 msgstr "Materiaalin tuominen onnistui: <filename>%1</filename>"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:308
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:316
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:335
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:343
 msgctxt "@title:window"
 msgid "Export Material"
 msgstr "Vie materiaali"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:320
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:347
 msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
 msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
 msgstr "Materiaalin vieminen epäonnistui kohteeseen <filename>%1</filename>: <message>%2</message>"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:326
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:353
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Successfully exported material to <filename>%1</filename>"
 msgstr "Materiaalin vieminen onnistui kohteeseen <filename>%1</filename>"
@@ -3158,383 +3157,406 @@ msgid "Unit"
 msgstr "Yksikkö"
 
 #: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:15
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:406
+#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:410
 msgctxt "@title:tab"
 msgid "General"
 msgstr "Yleiset"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:126
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:130
 msgctxt "@label"
 msgid "Interface"
 msgstr "Käyttöliittymä"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:137
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:141
 msgctxt "@label"
 msgid "Language:"
 msgstr "Kieli:"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:204
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:208
 msgctxt "@label"
 msgid "Currency:"
 msgstr "Valuutta:"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:217
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:221
 msgctxt "@label"
 msgid "Theme:"
 msgstr "Teema:"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:273
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:277
 msgctxt "@label"
 msgid "You will need to restart the application for these changes to have effect."
 msgstr "Sovellus on käynnistettävä uudelleen, jotta nämä muutokset tulevat voimaan."
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:290
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:294
 msgctxt "@info:tooltip"
 msgid "Slice automatically when changing settings."
 msgstr "Viipaloi automaattisesti, kun asetuksia muutetaan."
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:298
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:302
 msgctxt "@option:check"
 msgid "Slice automatically"
 msgstr "Viipaloi automaattisesti"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:312
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:316
 msgctxt "@label"
 msgid "Viewport behavior"
 msgstr "Näyttöikkunan käyttäytyminen"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:320
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:324
 msgctxt "@info:tooltip"
 msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly."
 msgstr "Korosta mallin vailla tukea olevat alueet punaisella. Ilman tukea nämä alueet eivät tulostu kunnolla."
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:329
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:333
 msgctxt "@option:check"
 msgid "Display overhang"
 msgstr "Näytä uloke"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:336
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:341
 msgctxt "@info:tooltip"
 msgid "Moves the camera so the model is in the center of the view when a model is selected"
 msgstr "Siirtää kameraa siten, että valittuna oleva malli on näkymän keskellä."
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:341
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:346
 msgctxt "@action:button"
 msgid "Center camera when item is selected"
 msgstr "Keskitä kamera kun kohde on valittu"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:350
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:356
 msgctxt "@info:tooltip"
 msgid "Should the default zoom behavior of cura be inverted?"
 msgstr "Pitääkö Curan oletusarvoinen zoom-toimintatapa muuttaa päinvastaiseksi?"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:355
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:361
 msgctxt "@action:button"
 msgid "Invert the direction of camera zoom."
 msgstr "Käännä kameran zoomin suunta päinvastaiseksi."
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:365
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:371
 msgctxt "@info:tooltip"
 msgid "Should zooming move in the direction of the mouse?"
 msgstr "Tuleeko zoomauksen siirtyä hiiren suuntaan?"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:370
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:371
+msgctxt "@info:tooltip"
+msgid "Zooming towards the mouse is not supported in the orthogonal perspective."
+msgstr ""
+
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:376
 msgctxt "@action:button"
 msgid "Zoom toward mouse direction"
 msgstr "Zoomaa hiiren suuntaan"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:380
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:402
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved so that they no longer intersect?"
 msgstr "Pitäisikö alustalla olevia malleja siirtää niin, etteivät ne enää leikkaa toisiaan?"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:385
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:407
 msgctxt "@option:check"
 msgid "Ensure models are kept apart"
 msgstr "Varmista, että mallit ovat erillään"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:394
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:416
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved down to touch the build plate?"
 msgstr "Pitäisikö tulostusalueella olevia malleja siirtää alas niin, että ne koskettavat tulostusalustaa?"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:399
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:421
 msgctxt "@option:check"
 msgid "Automatically drop models to the build plate"
 msgstr "Pudota mallit automaattisesti alustalle"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:411
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:433
 msgctxt "@info:tooltip"
 msgid "Show caution message in g-code reader."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:420
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:442
 msgctxt "@option:check"
 msgid "Caution message in g-code reader"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:428
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:450
 msgctxt "@info:tooltip"
 msgid "Should layer be forced into compatibility mode?"
 msgstr "Pakotetaanko kerros yhteensopivuustilaan?"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:433
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:455
 msgctxt "@option:check"
 msgid "Force layer view compatibility mode (restart required)"
 msgstr "Pakota kerrosnäkymän yhteensopivuustila (vaatii uudelleenkäynnistyksen)"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:449
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:465
+msgctxt "@info:tooltip"
+msgid "What type of camera rendering should be used?"
+msgstr ""
+
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:472
+msgctxt "@window:text"
+msgid "Camera rendering: "
+msgstr ""
+
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:483
+msgid "Perspective"
+msgstr ""
+
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:484
+msgid "Orthogonal"
+msgstr ""
+
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:515
 msgctxt "@label"
 msgid "Opening and saving files"
 msgstr "Tiedostojen avaaminen ja tallentaminen"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:456
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:522
 msgctxt "@info:tooltip"
 msgid "Should models be scaled to the build volume if they are too large?"
 msgstr "Pitäisikö mallit skaalata tulostustilavuuteen, jos ne ovat liian isoja?"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:461
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:527
 msgctxt "@option:check"
 msgid "Scale large models"
 msgstr "Skaalaa suuret mallit"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:471
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:537
 msgctxt "@info:tooltip"
 msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?"
 msgstr "Malli voi vaikuttaa erittäin pieneltä, jos sen koko on ilmoitettu esimerkiksi metreissä eikä millimetreissä. Pitäisikö nämä mallit suurentaa?"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:476
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:542
 msgctxt "@option:check"
 msgid "Scale extremely small models"
 msgstr "Skaalaa erittäin pienet mallit"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:486
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:552
 msgctxt "@info:tooltip"
 msgid "Should models be selected after they are loaded?"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:491
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:557
 msgctxt "@option:check"
 msgid "Select models when loaded"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:501
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:567
 msgctxt "@info:tooltip"
 msgid "Should a prefix based on the printer name be added to the print job name automatically?"
 msgstr "Pitäisikö tulostustyön nimeen lisätä automaattisesti tulostimen nimeen perustuva etuliite?"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:506
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:572
 msgctxt "@option:check"
 msgid "Add machine prefix to job name"
 msgstr "Lisää laitteen etuliite työn nimeen"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:516
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:582
 msgctxt "@info:tooltip"
 msgid "Should a summary be shown when saving a project file?"
 msgstr "Näytetäänkö yhteenveto, kun projektitiedosto tallennetaan?"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:520
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:586
 msgctxt "@option:check"
 msgid "Show summary dialog when saving project"
 msgstr "Näytä yhteenvetoikkuna, kun projekti tallennetaan"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:530
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:596
 msgctxt "@info:tooltip"
 msgid "Default behavior when opening a project file"
 msgstr "Projektitiedoston avaamisen oletustoimintatapa"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:538
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:604
 msgctxt "@window:text"
 msgid "Default behavior when opening a project file: "
 msgstr "Projektitiedoston avaamisen oletustoimintatapa: "
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:552
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:618
 msgctxt "@option:openProject"
 msgid "Always ask me this"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:553
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:619
 msgctxt "@option:openProject"
 msgid "Always open as a project"
 msgstr "Avaa aina projektina"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:554
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:620
 msgctxt "@option:openProject"
 msgid "Always import models"
 msgstr "Tuo mallit aina"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:590
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:656
 msgctxt "@info:tooltip"
 msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
 msgstr "Kun olet tehnyt muutokset profiiliin ja vaihtanut toiseen, näytetään valintaikkuna, jossa kysytään, haluatko säilyttää vai hylätä muutokset. Tässä voit myös valita oletuskäytöksen, jolloin valintaikkunaa ei näytetä uudelleen."
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:599
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:665
 msgctxt "@label"
 msgid "Profiles"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:604
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:670
 msgctxt "@window:text"
 msgid "Default behavior for changed setting values when switching to a different profile: "
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:618
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:684
 #: /home/ruben/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:157
 msgctxt "@option:discardOrKeep"
 msgid "Always ask me this"
 msgstr "Kysy aina"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:619
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:685
 msgctxt "@option:discardOrKeep"
 msgid "Always discard changed settings"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:620
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:686
 msgctxt "@option:discardOrKeep"
 msgid "Always transfer changed settings to new profile"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:654
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:720
 msgctxt "@label"
 msgid "Privacy"
 msgstr "Tietosuoja"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:661
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:727
 msgctxt "@info:tooltip"
 msgid "Should Cura check for updates when the program is started?"
 msgstr "Pitäisikö Curan tarkistaa saatavilla olevat päivitykset, kun ohjelma käynnistetään?"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:666
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:732
 msgctxt "@option:check"
 msgid "Check for updates on start"
 msgstr "Tarkista päivitykset käynnistettäessä"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:676
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:742
 msgctxt "@info:tooltip"
 msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored."
 msgstr "Pitäisikö anonyymejä tietoja tulosteesta lähettää Ultimakerille? Huomaa, että malleja, IP-osoitteita tai muita henkilökohtaisia tietoja ei lähetetä eikä tallenneta."
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:681
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:747
 msgctxt "@option:check"
 msgid "Send (anonymous) print information"
 msgstr "Lähetä (anonyymit) tulostustiedot"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:690
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:756
 msgctxt "@action:button"
 msgid "More information"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:708
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:774
 #: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:27
 #: /home/ruben/Projects/Cura/resources/qml/Menus/ProfileMenu.qml:23
 msgctxt "@label"
 msgid "Experimental"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:715
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:781
 msgctxt "@info:tooltip"
 msgid "Use multi build plate functionality"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:720
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:786
 msgctxt "@option:check"
 msgid "Use multi build plate functionality (restart required)"
 msgstr ""
 
 #: /home/ruben/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:16
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:411
+#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:415
 msgctxt "@title:tab"
 msgid "Printers"
 msgstr "Tulostimet"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:59
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:129
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:63
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:134
 msgctxt "@action:button"
 msgid "Rename"
 msgstr "Nimeä uudelleen"
 
 #: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:36
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:415
+#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:419
 msgctxt "@title:tab"
 msgid "Profiles"
 msgstr "Profiilit"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:87
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:89
 msgctxt "@label"
 msgid "Create"
 msgstr "Luo"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:102
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:105
 msgctxt "@label"
 msgid "Duplicate"
 msgstr "Jäljennös"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:174
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:181
 msgctxt "@title:window"
 msgid "Create Profile"
 msgstr "Luo profiili"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:176
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:183
 msgctxt "@info"
 msgid "Please provide a name for this profile."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:232
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:239
 msgctxt "@title:window"
 msgid "Duplicate Profile"
 msgstr "Monista profiili"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:263
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:270
 msgctxt "@title:window"
 msgid "Rename Profile"
 msgstr "Nimeä profiili uudelleen"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:276
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:283
 msgctxt "@title:window"
 msgid "Import Profile"
 msgstr "Profiilin tuonti"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:302
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:309
 msgctxt "@title:window"
 msgid "Export Profile"
 msgstr "Profiilin vienti"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:357
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:364
 msgctxt "@label %1 is printer name"
 msgid "Printer: %1"
 msgstr "Tulostin: %1"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:413
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:420
 msgctxt "@label"
 msgid "Default profiles"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:413
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:420
 msgctxt "@label"
 msgid "Custom profiles"
 msgstr "Mukautetut profiilit"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:490
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:500
 msgctxt "@action:button"
 msgid "Update profile with current settings/overrides"
 msgstr "Päivitä nykyiset asetukset tai ohitukset profiiliin"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:497
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:507
 msgctxt "@action:button"
 msgid "Discard current changes"
 msgstr "Hylkää tehdyt muutokset"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:514
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:524
 msgctxt "@action:label"
 msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
 msgstr "Tässä profiilissa käytetään tulostimen oletusarvoja, joten siinä ei ole alla olevan listan asetuksia tai ohituksia."
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:521
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:531
 msgctxt "@action:label"
 msgid "Your current settings match the selected profile."
 msgstr "Nykyiset asetukset vastaavat valittua profiilia."
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:540
+#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:550
 msgctxt "@title:tab"
 msgid "Global Settings"
 msgstr "Yleiset asetukset"
@@ -3602,33 +3624,33 @@ msgctxt "@label:textbox"
 msgid "search settings"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingView.qml:465
+#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingView.qml:466
 msgctxt "@action:menu"
 msgid "Copy value to all extruders"
 msgstr "Kopioi arvo kaikkiin suulakepuristimiin"
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingView.qml:474
+#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingView.qml:475
 msgctxt "@action:menu"
 msgid "Copy all changed values to all extruders"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingView.qml:511
+#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingView.qml:512
 msgctxt "@action:menu"
 msgid "Hide this setting"
 msgstr "Piilota tämä asetus"
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingView.qml:529
+#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingView.qml:525
 msgctxt "@action:menu"
 msgid "Don't show this setting"
 msgstr "Älä näytä tätä asetusta"
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingView.qml:533
+#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingView.qml:529
 msgctxt "@action:menu"
 msgid "Keep this setting visible"
 msgstr "Pidä tämä asetus näkyvissä"
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingView.qml:557
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:425
+#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingView.qml:548
+#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:434
 msgctxt "@action:menu"
 msgid "Configure setting visibility..."
 msgstr "Määritä asetusten näkyvyys..."
@@ -3644,32 +3666,32 @@ msgstr ""
 "\n"
 "Tee asetuksista näkyviä napsauttamalla."
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:67
+#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:81
 msgctxt "@label"
 msgid "This setting is not used because all the settings that it influences are overridden."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:72
+#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:86
 msgctxt "@label Header for list of settings."
 msgid "Affects"
 msgstr "Koskee seuraavia:"
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:77
+#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:91
 msgctxt "@label Header for list of settings."
 msgid "Affected By"
 msgstr "Riippuu seuraavista:"
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:172
+#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:186
 msgctxt "@label"
 msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:176
+#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:190
 msgctxt "@label"
 msgid "The value is resolved from per-extruder values "
 msgstr "Arvo perustuu suulakepuristimien arvoihin "
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:214
+#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:228
 msgctxt "@label"
 msgid ""
 "This setting has a value that is different from the profile.\n"
@@ -3680,7 +3702,7 @@ msgstr ""
 "\n"
 "Palauta profiilin arvo napsauttamalla."
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:308
+#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:322
 msgctxt "@label"
 msgid ""
 "This setting is normally calculated, but it currently has an absolute value set.\n"
@@ -3696,7 +3718,7 @@ msgctxt "@button"
 msgid "Recommended"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:157
+#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
 msgctxt "@button"
 msgid "Custom"
 msgstr ""
@@ -3721,12 +3743,12 @@ msgctxt "@label"
 msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
 msgstr "Muodosta rakenteita, jotka tukevat mallin ulokkeita sisältäviä osia. Ilman tukirakenteita kyseiset osat luhistuvat tulostuksen aikana."
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:28
+#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
 msgctxt "@label"
 msgid "Adhesion"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:85
+#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
 msgctxt "@label"
 msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
 msgstr "Ota reunuksen tai pohjaristikon tulostus käyttöön. Tämä lisää kappaleen ympärille tai alle tasaisen alueen, joka on helppo leikata pois myöhemmin."
@@ -3812,7 +3834,7 @@ msgctxt "@label"
 msgid "Send G-code"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:364
+#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
 msgctxt "@tooltip of G-code command input"
 msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
 msgstr ""
@@ -3909,11 +3931,6 @@ msgctxt "@label:category menu label"
 msgid "Favorites"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:66
-msgctxt "@label:category menu label"
-msgid "Generic"
-msgstr ""
-
 #: /home/ruben/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:25
 msgctxt "@label:category menu label"
 msgid "Network enabled printers"
@@ -3964,7 +3981,22 @@ msgctxt "@action:inmenu menubar:view"
 msgid "&Camera position"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ViewMenu.qml:35
+#: /home/ruben/Projects/Cura/resources/qml/Menus/ViewMenu.qml:44
+msgctxt "@action:inmenu menubar:view"
+msgid "Camera view"
+msgstr ""
+
+#: /home/ruben/Projects/Cura/resources/qml/Menus/ViewMenu.qml:47
+msgctxt "@action:inmenu menubar:view"
+msgid "Perspective"
+msgstr ""
+
+#: /home/ruben/Projects/Cura/resources/qml/Menus/ViewMenu.qml:59
+msgctxt "@action:inmenu menubar:view"
+msgid "Orthographic"
+msgstr ""
+
+#: /home/ruben/Projects/Cura/resources/qml/Menus/ViewMenu.qml:80
 msgctxt "@action:inmenu menubar:view"
 msgid "&Build plate"
 msgstr ""
@@ -4083,22 +4115,22 @@ msgctxt "@title:menu menubar:file"
 msgid "Open &Recent"
 msgstr "Avaa &viimeisin"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintMonitor.qml:145
+#: /home/ruben/Projects/Cura/resources/qml/PrintMonitor.qml:140
 msgctxt "@label"
 msgid "Active print"
 msgstr "Aktiivinen tulostustyö"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintMonitor.qml:153
+#: /home/ruben/Projects/Cura/resources/qml/PrintMonitor.qml:148
 msgctxt "@label"
 msgid "Job Name"
 msgstr "Työn nimi"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintMonitor.qml:161
+#: /home/ruben/Projects/Cura/resources/qml/PrintMonitor.qml:156
 msgctxt "@label"
 msgid "Printing Time"
 msgstr "Tulostusaika"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintMonitor.qml:169
+#: /home/ruben/Projects/Cura/resources/qml/PrintMonitor.qml:164
 msgctxt "@label"
 msgid "Estimated time left"
 msgstr "Aikaa jäljellä arviolta"
@@ -4108,6 +4140,11 @@ msgctxt "@label"
 msgid "View type"
 msgstr ""
 
+#: /home/ruben/Projects/Cura/resources/qml/ObjectSelector.qml:59
+msgctxt "@label"
+msgid "Object list"
+msgstr ""
+
 #: /home/ruben/Projects/Cura/resources/qml/Account/UserOperations.qml:22
 msgctxt "@label The argument is a username."
 msgid "Hi %1"
@@ -4156,32 +4193,37 @@ msgctxt "@label"
 msgid "No cost estimation available"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:126
+#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
 msgctxt "@button"
 msgid "Preview"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:49
+#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
 msgctxt "@label:PrintjobStatus"
 msgid "Slicing..."
 msgstr "Viipaloidaan..."
 
-#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:61
+#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
 msgctxt "@label:PrintjobStatus"
 msgid "Unable to slice"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:97
+#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
+msgctxt "@button"
+msgid "Processing"
+msgstr ""
+
+#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
 msgctxt "@button"
 msgid "Slice"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:98
+#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
 msgctxt "@label"
 msgid "Start the slicing process"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:112
+#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
 msgctxt "@button"
 msgid "Cancel"
 msgstr ""
@@ -4216,233 +4258,238 @@ msgctxt "@label"
 msgid "Preset printers"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:162
+#: /home/ruben/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:166
 msgctxt "@button"
 msgid "Add printer"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:177
+#: /home/ruben/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:182
 msgctxt "@button"
 msgid "Manage printers"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:80
+#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:81
 msgctxt "@action:inmenu"
 msgid "Show Online Troubleshooting Guide"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:87
+#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:88
 msgctxt "@action:inmenu"
 msgid "Toggle Full Screen"
 msgstr "Vaihda koko näyttöön"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:94
+#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:96
+msgctxt "@action:inmenu"
+msgid "Exit Full Screen"
+msgstr ""
+
+#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:103
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Undo"
 msgstr "&Kumoa"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:104
+#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:113
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Redo"
 msgstr "Tee &uudelleen"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:114
+#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:123
 msgctxt "@action:inmenu menubar:file"
 msgid "&Quit"
 msgstr "&Lopeta"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:122
+#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:131
 msgctxt "@action:inmenu menubar:view"
 msgid "3D View"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:129
+#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:138
 msgctxt "@action:inmenu menubar:view"
 msgid "Front View"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:136
+#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:145
 msgctxt "@action:inmenu menubar:view"
 msgid "Top View"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:143
+#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:152
 msgctxt "@action:inmenu menubar:view"
 msgid "Left Side View"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:150
+#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:159
 msgctxt "@action:inmenu menubar:view"
 msgid "Right Side View"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:157
+#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:166
 msgctxt "@action:inmenu"
 msgid "Configure Cura..."
 msgstr "Määritä Curan asetukset..."
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:164
+#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:173
 msgctxt "@action:inmenu menubar:printer"
 msgid "&Add Printer..."
 msgstr "L&isää tulostin..."
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:170
+#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:179
 msgctxt "@action:inmenu menubar:printer"
 msgid "Manage Pr&inters..."
 msgstr "Tulostinten &hallinta..."
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:177
+#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:186
 msgctxt "@action:inmenu"
 msgid "Manage Materials..."
 msgstr "Hallitse materiaaleja..."
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:186
+#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:195
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Update profile with current settings/overrides"
 msgstr "&Päivitä nykyiset asetukset tai ohitukset profiiliin"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:194
+#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:203
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Discard current changes"
 msgstr "&Hylkää tehdyt muutokset"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:206
+#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:215
 msgctxt "@action:inmenu menubar:profile"
 msgid "&Create profile from current settings/overrides..."
 msgstr "&Luo profiili nykyisten asetusten tai ohitusten perusteella..."
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:212
+#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:221
 msgctxt "@action:inmenu menubar:profile"
 msgid "Manage Profiles..."
 msgstr "Profiilien hallinta..."
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:220
+#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:229
 msgctxt "@action:inmenu menubar:help"
 msgid "Show Online &Documentation"
 msgstr "Näytä sähköinen &dokumentaatio"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:228
+#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:237
 msgctxt "@action:inmenu menubar:help"
 msgid "Report a &Bug"
 msgstr "Ilmoita &virheestä"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:236
+#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:245
 msgctxt "@action:inmenu menubar:help"
 msgid "What's New"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:242
+#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:251
 msgctxt "@action:inmenu menubar:help"
 msgid "About..."
 msgstr "Tietoja..."
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:249
+#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:258
 msgctxt "@action:inmenu menubar:edit"
 msgid "Delete Selected Model"
 msgid_plural "Delete Selected Models"
 msgstr[0] "Poista valittu malli"
 msgstr[1] "Poista valitut mallit"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:259
+#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:268
 msgctxt "@action:inmenu menubar:edit"
 msgid "Center Selected Model"
 msgid_plural "Center Selected Models"
 msgstr[0] "Keskitä valittu malli"
 msgstr[1] "Keskitä valitut mallit"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:268
+#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:277
 msgctxt "@action:inmenu menubar:edit"
 msgid "Multiply Selected Model"
 msgid_plural "Multiply Selected Models"
 msgstr[0] "Kerro valittu malli"
 msgstr[1] "Kerro valitut mallit"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:277
+#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:286
 msgctxt "@action:inmenu"
 msgid "Delete Model"
 msgstr "Poista malli"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:285
+#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:294
 msgctxt "@action:inmenu"
 msgid "Ce&nter Model on Platform"
 msgstr "Ke&skitä malli alustalle"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:291
+#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:300
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Group Models"
 msgstr "&Ryhmittele mallit"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:311
+#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:320
 msgctxt "@action:inmenu menubar:edit"
 msgid "Ungroup Models"
 msgstr "Poista mallien ryhmitys"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:321
+#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:330
 msgctxt "@action:inmenu menubar:edit"
 msgid "&Merge Models"
 msgstr "&Yhdistä mallit"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:331
+#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:340
 msgctxt "@action:inmenu"
 msgid "&Multiply Model..."
 msgstr "&Kerro malli..."
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:338
+#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:347
 msgctxt "@action:inmenu menubar:edit"
 msgid "Select All Models"
 msgstr "Valitse kaikki mallit"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:348
+#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:357
 msgctxt "@action:inmenu menubar:edit"
 msgid "Clear Build Plate"
 msgstr "Tyhjennä tulostusalusta"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:358
+#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:367
 msgctxt "@action:inmenu menubar:file"
 msgid "Reload All Models"
 msgstr "Lataa kaikki mallit uudelleen"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:367
+#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:376
 msgctxt "@action:inmenu menubar:edit"
 msgid "Arrange All Models To All Build Plates"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:374
+#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:383
 msgctxt "@action:inmenu menubar:edit"
 msgid "Arrange All Models"
 msgstr "Järjestä kaikki mallit"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:382
+#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:391
 msgctxt "@action:inmenu menubar:edit"
 msgid "Arrange Selection"
 msgstr "Järjestä valinta"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:389
+#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:398
 msgctxt "@action:inmenu menubar:edit"
 msgid "Reset All Model Positions"
 msgstr "Määritä kaikkien mallien positiot uudelleen"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:396
+#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:405
 msgctxt "@action:inmenu menubar:edit"
 msgid "Reset All Model Transformations"
 msgstr "Määritä kaikkien mallien muutokset uudelleen"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:403
+#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:412
 msgctxt "@action:inmenu menubar:file"
 msgid "&Open File(s)..."
 msgstr "&Avaa tiedosto(t)..."
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:411
+#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:420
 msgctxt "@action:inmenu menubar:file"
 msgid "&New Project..."
 msgstr "&Uusi projekti..."
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:418
+#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:427
 msgctxt "@action:inmenu menubar:help"
 msgid "Show Configuration Folder"
 msgstr "Näytä määrityskansio"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:432
+#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:441
 msgctxt "@action:menu"
 msgid "&Marketplace"
 msgstr ""
@@ -4457,49 +4504,49 @@ msgctxt "@label"
 msgid "This package will be installed after restarting."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:409
+#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:413
 msgctxt "@title:tab"
 msgid "Settings"
 msgstr "Asetukset"
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:535
+#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:539
 msgctxt "@title:window"
 msgid "Closing Cura"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:536
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:548
+#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:540
+#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:552
 msgctxt "@label"
 msgid "Are you sure you want to exit Cura?"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:580
+#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:590
 #: /home/ruben/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
 msgctxt "@title:window"
 msgid "Open file(s)"
 msgstr "Avaa tiedosto(t)"
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:681
+#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:691
 msgctxt "@window:title"
 msgid "Install Package"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:689
+#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:699
 msgctxt "@title:window"
 msgid "Open File(s)"
 msgstr "Avaa tiedosto(t)"
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:692
+#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:702
 msgctxt "@text:window"
 msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
 msgstr "Löysimme vähintään yhden Gcode-tiedoston valitsemiesi tiedostojen joukosta. Voit avata vain yhden Gcode-tiedoston kerrallaan. Jos haluat avata Gcode-tiedoston, valitse vain yksi."
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:795
+#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:805
 msgctxt "@title:window"
 msgid "Add Printer"
 msgstr "Lisää tulostin"
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:803
+#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:813
 msgctxt "@title:window"
 msgid "What's New"
 msgstr ""
@@ -4724,32 +4771,32 @@ msgctxt "@title:window"
 msgid "Save Project"
 msgstr "Tallenna projekti"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:138
+#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:149
 msgctxt "@action:label"
 msgid "Build plate"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:172
+#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:183
 msgctxt "@action:label"
 msgid "Extruder %1"
 msgstr "Suulake %1"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:187
+#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:198
 msgctxt "@action:label"
 msgid "%1 & material"
 msgstr "%1 & materiaali"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:189
+#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:200
 msgctxt "@action:label"
 msgid "Material"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:261
+#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:272
 msgctxt "@action:label"
 msgid "Don't show project summary on save again"
 msgstr "Älä näytä projektin yhteenvetoa tallennettaessa"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:280
+#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:291
 msgctxt "@action:button"
 msgid "Save"
 msgstr "Tallenna"
@@ -4925,12 +4972,12 @@ msgctxt "@label"
 msgid "Troubleshooting"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:204
+#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:207
 msgctxt "@label"
 msgid "Printer name"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:217
+#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:220
 msgctxt "@text"
 msgid "Please give your printer a name"
 msgstr ""
@@ -4987,21 +5034,6 @@ msgctxt "@button"
 msgid "Get started"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/ObjectsList.qml:210
-msgctxt "@option:check"
-msgid "See only current build plate"
-msgstr ""
-
-#: /home/ruben/Projects/Cura/resources/qml/ObjectsList.qml:226
-msgctxt "@action:button"
-msgid "Arrange to all build plates"
-msgstr ""
-
-#: /home/ruben/Projects/Cura/resources/qml/ObjectsList.qml:246
-msgctxt "@action:button"
-msgid "Arrange current build plate"
-msgstr ""
-
 #: MachineSettingsAction/plugin.json
 msgctxt "description"
 msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
@@ -5092,6 +5124,16 @@ msgctxt "name"
 msgid "Profile Flattener"
 msgstr ""
 
+#: AMFReader/plugin.json
+msgctxt "description"
+msgid "Provides support for reading AMF files."
+msgstr ""
+
+#: AMFReader/plugin.json
+msgctxt "name"
+msgid "AMF Reader"
+msgstr ""
+
 #: USBPrinting/plugin.json
 msgctxt "description"
 msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
@@ -5102,16 +5144,6 @@ msgctxt "name"
 msgid "USB printing"
 msgstr "USB-tulostus"
 
-#: X3GWriter/build/plugin.json
-msgctxt "description"
-msgid "Allows saving the resulting slice as an X3G file, to support printers that read this format (Malyan, Makerbot and other Sailfish-based printers)."
-msgstr ""
-
-#: X3GWriter/build/plugin.json
-msgctxt "name"
-msgid "X3GWriter"
-msgstr ""
-
 #: GCodeGzWriter/plugin.json
 msgctxt "description"
 msgid "Writes g-code to a compressed archive."
@@ -5362,6 +5394,16 @@ msgctxt "name"
 msgid "Version Upgrade 3.0 to 3.1"
 msgstr ""
 
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
+msgstr ""
+
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.1 to 4.2"
+msgstr ""
+
 #: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "description"
 msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
@@ -5432,16 +5474,6 @@ msgctxt "name"
 msgid "3MF Reader"
 msgstr "3MF-lukija"
 
-#: SVGToolpathReader/build/plugin.json
-msgctxt "description"
-msgid "Reads SVG files as toolpaths, for debugging printer movements."
-msgstr ""
-
-#: SVGToolpathReader/build/plugin.json
-msgctxt "name"
-msgid "SVG Toolpath Reader"
-msgstr ""
-
 #: SolidView/plugin.json
 msgctxt "description"
 msgid "Provides a normal solid mesh view."
@@ -5532,6 +5564,16 @@ msgctxt "name"
 msgid "Cura Profile Reader"
 msgstr "Cura-profiilin lukija"
 
+#~ msgctxt "@label"
+#~ msgid ""
+#~ "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer.\n"
+#~ "\n"
+#~ "Select your printer from the list below:"
+#~ msgstr ""
+#~ "Tulosta suoraan tulostimeen verkon kautta yhdistämällä tulostin verkkoon verkkokaapelilla tai yhdistämällä tulostin Wi-Fi-verkkoon. Jos Curaa ei yhdistetä tulostimeen, GCode-tiedostot voidaan silti siirtää tulostimeen USB-aseman avulla.\n"
+#~ "\n"
+#~ "Valitse tulostin alla olevasta luettelosta:"
+
 #~ msgctxt "@item:inmenu"
 #~ msgid "Show Changelog"
 #~ msgstr "Näytä muutosloki"
diff --git a/resources/i18n/fi_FI/fdmextruder.def.json.po b/resources/i18n/fi_FI/fdmextruder.def.json.po
index e03d0c345f..5cb1fedd6f 100644
--- a/resources/i18n/fi_FI/fdmextruder.def.json.po
+++ b/resources/i18n/fi_FI/fdmextruder.def.json.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.1\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2019-05-14 12:48+0000\n"
+"POT-Creation-Date: 2019-07-16 14:38+0000\n"
 "PO-Revision-Date: 2017-08-11 14:31+0200\n"
 "Last-Translator: Bothof <info@bothof.nl>\n"
 "Language-Team: Finnish\n"
diff --git a/resources/i18n/fi_FI/fdmprinter.def.json.po b/resources/i18n/fi_FI/fdmprinter.def.json.po
index 9fb7cfcd8f..f9c8c982d1 100644
--- a/resources/i18n/fi_FI/fdmprinter.def.json.po
+++ b/resources/i18n/fi_FI/fdmprinter.def.json.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.1\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2019-05-14 12:48+0000\n"
+"POT-Creation-Date: 2019-07-16 14:38+0000\n"
 "PO-Revision-Date: 2017-09-27 12:27+0200\n"
 "Last-Translator: Bothof <info@bothof.nl>\n"
 "Language-Team: Finnish\n"
@@ -332,7 +332,7 @@ msgstr "Minimiaika, jonka suulakkeen on oltava ei-aktiivinen, ennen kuin suutin
 
 #: fdmprinter.def.json
 msgctxt "machine_gcode_flavor label"
-msgid "G-code Flavour"
+msgid "G-code Flavor"
 msgstr ""
 
 #: fdmprinter.def.json
@@ -1292,8 +1292,8 @@ msgstr "Saumakulmien asetus"
 
 #: fdmprinter.def.json
 msgctxt "z_seam_corner description"
-msgid "Control whether corners on the model outline influence the position of the seam. None means that corners have no influence on the seam position. Hide Seam makes the seam more likely to occur on an inside corner. Expose Seam makes the seam more likely to occur on an outside corner. Hide or Expose Seam makes the seam more likely to occur at an inside or outside corner."
-msgstr "Määritä, vaikuttavatko mallin ulkolinjan kulmat sauman sijaintiin. Ei mitään tarkoittaa, että kulmilla ei ole vaikutusta sauman sijaintiin. Piilota sauma -valinnalla sauman sijainti sisäkulmassa on todennäköisempää. Paljasta sauma -valinnalla sauman sijainti ulkokulmassa on todennäköisempää. Piilota tai paljasta sauma -valinnalla sauman sijainti sisä- tai ulkokulmassa on todennäköisempää."
+msgid "Control whether corners on the model outline influence the position of the seam. None means that corners have no influence on the seam position. Hide Seam makes the seam more likely to occur on an inside corner. Expose Seam makes the seam more likely to occur on an outside corner. Hide or Expose Seam makes the seam more likely to occur at an inside or outside corner. Smart Hiding allows both inside and outside corners, but chooses inside corners more frequently, if appropriate."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "z_seam_corner option z_seam_corner_none"
@@ -1316,6 +1316,11 @@ msgid "Hide or Expose Seam"
 msgstr "Piilota tai paljasta sauma"
 
 #: fdmprinter.def.json
+msgctxt "z_seam_corner option z_seam_corner_weighted"
+msgid "Smart Hiding"
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "z_seam_relative label"
 msgid "Z Seam Relative"
 msgstr "Z-sauma suhteellinen"
@@ -1327,13 +1332,13 @@ msgstr "Kun tämä on käytössä, Z-sauman koordinaatit ovat suhteessa kunkin o
 
 #: fdmprinter.def.json
 msgctxt "skin_no_small_gaps_heuristic label"
-msgid "Ignore Small Z Gaps"
-msgstr "Ohita pienet Z-raot"
+msgid "No Skin in Z Gaps"
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "skin_no_small_gaps_heuristic description"
-msgid "When the model has small vertical gaps, about 5% extra computation time can be spent on generating top and bottom skin in these narrow spaces. In such case, disable the setting."
-msgstr "Kun mallissa on pieniä pystyrakoja, ylä- ja alapuolen pintakalvon tekemiseen näihin kapeisiin paikkoihin voi kulua noin 5 % ylimääräistä laskenta-aikaa. Poista siinä tapauksessa tämä asetus käytöstä."
+msgid "When the model has small vertical gaps of only a few layers, there should normally be skin around those layers in the narrow space. Enable this setting to not generate skin if the vertical gap is very small. This improves printing time and slicing time, but technically leaves infill exposed to the air."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "skin_outline_count label"
@@ -1869,7 +1874,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "build_volume_temperature description"
-msgid "The temperature used for build volume. If this is 0, the build volume temperature will not be adjusted."
+msgid "The temperature of the environment to print in. If this is 0, the build volume temperature will not be adjusted."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -1983,6 +1988,86 @@ msgid "Shrinkage ratio in percentage."
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "material_crystallinity label"
+msgid "Crystalline Material"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_crystallinity description"
+msgid "Is this material the type that breaks off cleanly when heated (crystalline), or is it the type that produces long intertwined polymer chains (non-crystalline)?"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_anti_ooze_retracted_position label"
+msgid "Anti-ooze Retracted Position"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_anti_ooze_retracted_position description"
+msgid "How far the material needs to be retracted before it stops oozing."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_anti_ooze_retraction_speed label"
+msgid "Anti-ooze Retraction Speed"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_anti_ooze_retraction_speed description"
+msgid "How fast the material needs to be retracted during a filament switch to prevent oozing."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_break_preparation_retracted_position label"
+msgid "Break Preparation Retracted Position"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_break_preparation_retracted_position description"
+msgid "How far the filament can be stretched before it breaks, while heated."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_break_preparation_speed label"
+msgid "Break Preparation Retraction Speed"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_break_preparation_speed description"
+msgid "How fast the filament needs to be retracted just before breaking it off in a retraction."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_break_retracted_position label"
+msgid "Break Retracted Position"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_break_retracted_position description"
+msgid "How far to retract the filament in order to break it cleanly."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_break_speed label"
+msgid "Break Retraction Speed"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_break_speed description"
+msgid "The speed at which to retract the filament in order to break it cleanly."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_break_temperature label"
+msgid "Break Temperature"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_break_temperature description"
+msgid "The temperature at which the filament is broken for a clean break."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "material_flow label"
 msgid "Flow"
 msgstr "Virtaus"
@@ -1993,6 +2078,126 @@ msgid "Flow compensation: the amount of material extruded is multiplied by this
 msgstr "Virtauksen kompensointi: pursotetun materiaalin määrä kerrotaan tällä arvolla."
 
 #: fdmprinter.def.json
+msgctxt "wall_material_flow label"
+msgid "Wall Flow"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_material_flow description"
+msgid "Flow compensation on wall lines."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_0_material_flow label"
+msgid "Outer Wall Flow"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_0_material_flow description"
+msgid "Flow compensation on the outermost wall line."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_x_material_flow label"
+msgid "Inner Wall(s) Flow"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_x_material_flow description"
+msgid "Flow compensation on wall lines for all wall lines except the outermost one."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "skin_material_flow label"
+msgid "Top/Bottom Flow"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "skin_material_flow description"
+msgid "Flow compensation on top/bottom lines."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "roofing_material_flow label"
+msgid "Top Surface Skin Flow"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "roofing_material_flow description"
+msgid "Flow compensation on lines of the areas at the top of the print."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "infill_material_flow label"
+msgid "Infill Flow"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "infill_material_flow description"
+msgid "Flow compensation on infill lines."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "skirt_brim_material_flow label"
+msgid "Skirt/Brim Flow"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "skirt_brim_material_flow description"
+msgid "Flow compensation on skirt or brim lines."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_material_flow label"
+msgid "Support Flow"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_material_flow description"
+msgid "Flow compensation on support structure lines."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_interface_material_flow label"
+msgid "Support Interface Flow"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_interface_material_flow description"
+msgid "Flow compensation on lines of support roof or floor."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_roof_material_flow label"
+msgid "Support Roof Flow"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_roof_material_flow description"
+msgid "Flow compensation on support roof lines."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_bottom_material_flow label"
+msgid "Support Floor Flow"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_bottom_material_flow description"
+msgid "Flow compensation on support floor lines."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "prime_tower_flow label"
+msgid "Prime Tower Flow"
+msgstr "Esitäyttötornin virtaus"
+
+#: fdmprinter.def.json
+msgctxt "prime_tower_flow description"
+msgid "Flow compensation on prime tower lines."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "material_flow_layer_0 label"
 msgid "Initial Layer Flow"
 msgstr ""
@@ -2109,7 +2314,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "limit_support_retractions description"
-msgid "Omit retraction when moving from support to support in a straight line. Enabling this setting saves print time, but can lead to excesive stringing within the support structure."
+msgid "Omit retraction when moving from support to support in a straight line. Enabling this setting saves print time, but can lead to excessive stringing within the support structure."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -2163,6 +2368,16 @@ msgid "The speed at which the filament is pushed back after a nozzle switch retr
 msgstr "Nopeus, jolla tulostuslanka työnnetään takaisin suuttimen vaihdon takaisinvedon jälkeen."
 
 #: fdmprinter.def.json
+msgctxt "switch_extruder_extra_prime_amount label"
+msgid "Nozzle Switch Extra Prime Amount"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "switch_extruder_extra_prime_amount description"
+msgid "Extra material to prime after nozzle switching."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "speed label"
 msgid "Speed"
 msgstr "Nopeus"
@@ -2353,14 +2568,14 @@ msgid "The speed at which the skirt and brim are printed. Normally this is done
 msgstr "Nopeus, jolla helma ja reunus tulostetaan. Yleensä se tehdään alkukerroksen nopeudella. Joskus helma tai reunus halutaan kuitenkin tulostaa eri nopeudella."
 
 #: fdmprinter.def.json
-msgctxt "max_feedrate_z_override label"
-msgid "Maximum Z Speed"
-msgstr "Z:n maksiminopeus"
+msgctxt "speed_z_hop label"
+msgid "Z Hop Speed"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "max_feedrate_z_override description"
-msgid "The maximum speed with which the build plate is moved. Setting this to zero causes the print to use the firmware defaults for the maximum z speed."
-msgstr "Maksiminopeus, jolla alustaa liikutetaan. Jos tämä määritetään nollaan, tulostuksessa käytetään laiteohjelmiston oletusasetuksia Z:n maksiminopeudelle."
+msgctxt "speed_z_hop description"
+msgid "The speed at which the vertical Z movement is made for Z Hops. This is typically lower than the print speed since the build plate or machine's gantry is harder to move."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "speed_slowdown_layers label"
@@ -3414,8 +3629,8 @@ msgstr "Tuen liitosetäisyys"
 
 #: fdmprinter.def.json
 msgctxt "support_join_distance description"
-msgid "The maximum distance between support structures in the X/Y directions. When seperate structures are closer together than this value, the structures merge into one."
-msgstr "Tukirakenteiden maksimietäisyys toisistaan X-/Y-suunnissa. Kun erilliset rakenteet ovat tätä arvoa lähempänä toisiaan, rakenteet sulautuvat toisiinsa."
+msgid "The maximum distance between support structures in the X/Y directions. When separate structures are closer together than this value, the structures merge into one."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "support_offset label"
@@ -3793,14 +4008,14 @@ msgid "The diameter of a special tower."
 msgstr "Erityistornin läpimitta."
 
 #: fdmprinter.def.json
-msgctxt "support_minimal_diameter label"
-msgid "Minimum Diameter"
-msgstr "Minimiläpimitta"
+msgctxt "support_tower_maximum_supported_diameter label"
+msgid "Maximum Tower-Supported Diameter"
+msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "support_minimal_diameter description"
-msgid "Minimum diameter in the X/Y directions of a small area which is to be supported by a specialized support tower."
-msgstr "Erityisellä tukitornilla tuettavan pienen alueen minimiläpimitta X- ja Y-suunnissa."
+msgctxt "support_tower_maximum_supported_diameter description"
+msgid "Maximum diameter in the X/Y directions of a small area which is to be supported by a specialized support tower."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "support_tower_roof_angle label"
@@ -4295,16 +4510,6 @@ msgid "Print a tower next to the print which serves to prime the material after
 msgstr "Tulosta tulosteen viereen torni, jolla materiaali esitäytetään aina suuttimen vaihdon jälkeen."
 
 #: fdmprinter.def.json
-msgctxt "prime_tower_circular label"
-msgid "Circular Prime Tower"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "prime_tower_circular description"
-msgid "Make the prime tower as a circular shape."
-msgstr ""
-
-#: fdmprinter.def.json
 msgctxt "prime_tower_size label"
 msgid "Prime Tower Size"
 msgstr "Esitäyttötornin koko"
@@ -4345,16 +4550,6 @@ msgid "The y coordinate of the position of the prime tower."
 msgstr "Esitäyttötornin sijainnin Y-koordinaatti."
 
 #: fdmprinter.def.json
-msgctxt "prime_tower_flow label"
-msgid "Prime Tower Flow"
-msgstr "Esitäyttötornin virtaus"
-
-#: fdmprinter.def.json
-msgctxt "prime_tower_flow description"
-msgid "Flow compensation: the amount of material extruded is multiplied by this value."
-msgstr "Virtauksen kompensointi: pursotetun materiaalin määrä kerrotaan tällä arvolla."
-
-#: fdmprinter.def.json
 msgctxt "prime_tower_wipe_enabled label"
 msgid "Wipe Inactive Nozzle on Prime Tower"
 msgstr "Pyyhi esitäyttötornin ei-aktiivinen suutin"
@@ -4656,8 +4851,8 @@ msgstr "Kierukoitujen ääriviivojen tasoittaminen"
 
 #: fdmprinter.def.json
 msgctxt "smooth_spiralized_contours description"
-msgid "Smooth the spiralized contours to reduce the visibility of the Z seam (the Z-seam should be barely visible on the print but will still be visible in the layer view). Note that smoothing will tend to blur fine surface details."
-msgstr "Vähennä Z-sauman näkyvyyttä tasoittamalla kierukoidut ääriviivat (Z-sauman pitäisi olla lähes näkymätön tulosteessa, mutta kerrosnäkymässä sen voi edelleen havaita). Ota huomioon, että tasoittaminen usein sumentaa pinnan pieniä yksityiskohtia."
+msgid "Smooth the spiralized contours to reduce the visibility of the Z seam (the Z seam should be barely visible on the print but will still be visible in the layer view). Note that smoothing will tend to blur fine surface details."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "relative_extrusion label"
@@ -5156,8 +5351,8 @@ msgstr "Ota kartiomainen tuki käyttöön"
 
 #: fdmprinter.def.json
 msgctxt "support_conical_enabled description"
-msgid "Experimental feature: Make support areas smaller at the bottom than at the overhang."
-msgstr "Kokeellinen ominaisuus: tekee tukialueet pienemmiksi alaosassa verrattuna ulokkeeseen."
+msgid "Make support areas smaller at the bottom than at the overhang."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "support_conical_angle label"
@@ -5958,6 +6153,50 @@ msgctxt "mesh_rotation_matrix description"
 msgid "Transformation matrix to be applied to the model when loading it from file."
 msgstr "Mallissa käytettävä muunnosmatriisi, kun malli ladataan tiedostosta."
 
+#~ msgctxt "z_seam_corner description"
+#~ msgid "Control whether corners on the model outline influence the position of the seam. None means that corners have no influence on the seam position. Hide Seam makes the seam more likely to occur on an inside corner. Expose Seam makes the seam more likely to occur on an outside corner. Hide or Expose Seam makes the seam more likely to occur at an inside or outside corner."
+#~ msgstr "Määritä, vaikuttavatko mallin ulkolinjan kulmat sauman sijaintiin. Ei mitään tarkoittaa, että kulmilla ei ole vaikutusta sauman sijaintiin. Piilota sauma -valinnalla sauman sijainti sisäkulmassa on todennäköisempää. Paljasta sauma -valinnalla sauman sijainti ulkokulmassa on todennäköisempää. Piilota tai paljasta sauma -valinnalla sauman sijainti sisä- tai ulkokulmassa on todennäköisempää."
+
+#~ msgctxt "skin_no_small_gaps_heuristic label"
+#~ msgid "Ignore Small Z Gaps"
+#~ msgstr "Ohita pienet Z-raot"
+
+#~ msgctxt "skin_no_small_gaps_heuristic description"
+#~ msgid "When the model has small vertical gaps, about 5% extra computation time can be spent on generating top and bottom skin in these narrow spaces. In such case, disable the setting."
+#~ msgstr "Kun mallissa on pieniä pystyrakoja, ylä- ja alapuolen pintakalvon tekemiseen näihin kapeisiin paikkoihin voi kulua noin 5 % ylimääräistä laskenta-aikaa. Poista siinä tapauksessa tämä asetus käytöstä."
+
+#~ msgctxt "max_feedrate_z_override label"
+#~ msgid "Maximum Z Speed"
+#~ msgstr "Z:n maksiminopeus"
+
+#~ msgctxt "max_feedrate_z_override description"
+#~ msgid "The maximum speed with which the build plate is moved. Setting this to zero causes the print to use the firmware defaults for the maximum z speed."
+#~ msgstr "Maksiminopeus, jolla alustaa liikutetaan. Jos tämä määritetään nollaan, tulostuksessa käytetään laiteohjelmiston oletusasetuksia Z:n maksiminopeudelle."
+
+#~ msgctxt "support_join_distance description"
+#~ msgid "The maximum distance between support structures in the X/Y directions. When seperate structures are closer together than this value, the structures merge into one."
+#~ msgstr "Tukirakenteiden maksimietäisyys toisistaan X-/Y-suunnissa. Kun erilliset rakenteet ovat tätä arvoa lähempänä toisiaan, rakenteet sulautuvat toisiinsa."
+
+#~ msgctxt "support_minimal_diameter label"
+#~ msgid "Minimum Diameter"
+#~ msgstr "Minimiläpimitta"
+
+#~ msgctxt "support_minimal_diameter description"
+#~ msgid "Minimum diameter in the X/Y directions of a small area which is to be supported by a specialized support tower."
+#~ msgstr "Erityisellä tukitornilla tuettavan pienen alueen minimiläpimitta X- ja Y-suunnissa."
+
+#~ msgctxt "prime_tower_flow description"
+#~ msgid "Flow compensation: the amount of material extruded is multiplied by this value."
+#~ msgstr "Virtauksen kompensointi: pursotetun materiaalin määrä kerrotaan tällä arvolla."
+
+#~ msgctxt "smooth_spiralized_contours description"
+#~ msgid "Smooth the spiralized contours to reduce the visibility of the Z seam (the Z-seam should be barely visible on the print but will still be visible in the layer view). Note that smoothing will tend to blur fine surface details."
+#~ msgstr "Vähennä Z-sauman näkyvyyttä tasoittamalla kierukoidut ääriviivat (Z-sauman pitäisi olla lähes näkymätön tulosteessa, mutta kerrosnäkymässä sen voi edelleen havaita). Ota huomioon, että tasoittaminen usein sumentaa pinnan pieniä yksityiskohtia."
+
+#~ msgctxt "support_conical_enabled description"
+#~ msgid "Experimental feature: Make support areas smaller at the bottom than at the overhang."
+#~ msgstr "Kokeellinen ominaisuus: tekee tukialueet pienemmiksi alaosassa verrattuna ulokkeeseen."
+
 #~ msgctxt "machine_nozzle_tip_outer_diameter label"
 #~ msgid "Outer nozzle diameter"
 #~ msgstr "Suuttimen ulkoläpimitta"