Translations for 4.9

CURA-8153

1 files changed, 3941 insertions, 3660 deletions

diff --git a/resources/i18n/fr_FR/cura.po b/resources/i18n/fr_FR/cura.po
index aa443f1735..980f6a724e 100644
--- a/resources/i18n/fr_FR/cura.po
+++ b/resources/i18n/fr_FR/cura.po
@@ -1,12 +1,12 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0200\n"
+"POT-Creation-Date: 2021-04-02 16:10+0200\n"
 "PO-Revision-Date: 2020-11-09 14:02+0100\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: French <info@lionbridge.com>, French <info@bothof.nl>\n"
@@ -17,155 +17,188 @@ msgstr ""
 "Plural-Forms: nplurals=2; plural=(n > 1);\n"
 "X-Generator: Poedit 2.4.1\n"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:110 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:361 /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1581
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
-msgctxt "@label"
-msgid "Unknown"
-msgstr "Inconnu"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:523
+msgctxt "@info:progress"
+msgid "Loading machines..."
+msgstr "Chargement des machines..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
-msgctxt "@label"
-msgid "The printer(s) below cannot be connected because they are part of a group"
-msgstr "Les imprimantes ci-dessous ne peuvent pas être connectées car elles font partie d'un groupe"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:530
+msgctxt "@info:progress"
+msgid "Setting up preferences..."
+msgstr "Configuration des préférences..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
-msgctxt "@label"
-msgid "Available networked printers"
-msgstr "Imprimantes en réseau disponibles"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:668
+msgctxt "@info:progress"
+msgid "Initializing Active Machine..."
+msgstr "Initialisation de la machine active..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/ExtrudersModel.py:211
-msgctxt "@menuitem"
-msgid "Not overridden"
-msgstr "Pas écrasé"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:799
+msgctxt "@info:progress"
+msgid "Initializing machine manager..."
+msgstr "Initialisation du gestionnaire de machine..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/GlobalStacksModel.py:76
-#, python-brace-format
-msgctxt "@label {0} is the name of a printer that's about to be deleted."
-msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr "Voulez-vous vraiment supprimer l'objet {0} ? Cette action est irréversible !"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:813
+msgctxt "@info:progress"
+msgid "Initializing build volume..."
+msgstr "Initialisation du volume de fabrication..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:338
-msgctxt "@label"
-msgid "Default"
-msgstr "Default"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:884
+msgctxt "@info:progress"
+msgid "Setting up scene..."
+msgstr "Préparation de la scène..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:45 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:14
-msgctxt "@label"
-msgid "Visual"
-msgstr "Visuel"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:920
+msgctxt "@info:progress"
+msgid "Loading interface..."
+msgstr "Chargement de l'interface..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:46 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:15
-msgctxt "@text"
-msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
-msgstr "Le profil visuel est conçu pour imprimer des prototypes et des modèles visuels dans le but d'obtenir une qualité visuelle et de surface élevée."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:925
+msgctxt "@info:progress"
+msgid "Initializing engine..."
+msgstr "Initialisation du moteur..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:49 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:18
-msgctxt "@label"
-msgid "Engineering"
-msgstr "Engineering"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1242
+#, python-format
+msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
+msgid "%(width).1f x %(depth).1f x %(height).1f mm"
+msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:50 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:19
-msgctxt "@text"
-msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
-msgstr "Le profil d'ingénierie est conçu pour imprimer des prototypes fonctionnels et des pièces finales dans le but d'obtenir une meilleure précision et des tolérances plus étroites."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1799
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
+msgstr "Un seul fichier G-Code peut être chargé à la fois. Importation de {0} sautée"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:53 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:22
-msgctxt "@label"
-msgid "Draft"
-msgstr "Ébauche"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1800
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:188
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+msgctxt "@info:title"
+msgid "Warning"
+msgstr "Avertissement"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:54 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:23
-msgctxt "@text"
-msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
-msgstr "L'ébauche du profil est conçue pour imprimer les prototypes initiaux et la validation du concept dans le but de réduire considérablement le temps d'impression."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1809
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
+msgstr "Impossible d'ouvrir un autre fichier si le G-Code est en cours de chargement. Importation de {0} sautée"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1810
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:146
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
+msgctxt "@info:title"
+msgid "Error"
+msgstr "Erreur"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:226
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/GlobalStacksModel.py:76
+#, python-brace-format
+msgctxt "@label {0} is the name of a printer that's about to be deleted."
+msgid "Are you sure you wish to remove {0}? This cannot be undone!"
+msgstr "Voulez-vous vraiment supprimer l'objet {0} ? Cette action est irréversible !"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/MaterialManagementModel.py:226
 msgctxt "@label"
 msgid "Custom Material"
 msgstr "Matériau personnalisé"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:227 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/MaterialManagementModel.py:227
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
 msgctxt "@label"
 msgid "Custom"
 msgstr "Personnalisé"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:383
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:338
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:11
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:42
+msgctxt "@label"
+msgid "Default"
+msgstr "Default"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:361
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:110
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:1612
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
+msgctxt "@label"
+msgid "Unknown"
+msgstr "Inconnu"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:383
 msgctxt "@label"
 msgid "Custom profiles"
 msgstr "Personnaliser les profils"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:418
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:418
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "All Supported Types ({0})"
 msgstr "Tous les types supportés ({0})"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:419
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:419
 msgctxt "@item:inlistbox"
 msgid "All Files (*)"
 msgstr "Tous les fichiers (*)"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/API/Account.py:178
-msgctxt "@info:title"
-msgid "Login failed"
-msgstr "La connexion a échoué"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:24
-msgctxt "@info:status"
-msgid "Finding new location for objects"
-msgstr "Recherche d'un nouvel emplacement pour les objets"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:28
-msgctxt "@info:title"
-msgid "Finding Location"
-msgstr "Recherche d'emplacement"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:14
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:45
+msgctxt "@label"
+msgid "Visual"
+msgstr "Visuel"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:41 /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:76
-msgctxt "@info:status"
-msgid "Unable to find a location within the build volume for all objects"
-msgstr "Impossible de trouver un emplacement dans le volume d'impression pour tous les objets"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:15
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:46
+msgctxt "@text"
+msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
+msgstr "Le profil visuel est conçu pour imprimer des prototypes et des modèles visuels dans le but d'obtenir une qualité visuelle et de surface élevée."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:42
-msgctxt "@info:title"
-msgid "Can't Find Location"
-msgstr "Impossible de trouver un emplacement"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:18
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:49
+msgctxt "@label"
+msgid "Engineering"
+msgstr "Engineering"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:104
-msgctxt "@info:backup_failed"
-msgid "Could not create archive from user data directory: {}"
-msgstr "Impossible de créer une archive à partir du répertoire de données de l'utilisateur : {}"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:19
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:50
+msgctxt "@text"
+msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
+msgstr "Le profil d'ingénierie est conçu pour imprimer des prototypes fonctionnels et des pièces finales dans le but d'obtenir une meilleure précision et des tolérances plus étroites."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:110 /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107 /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
-msgctxt "@info:title"
-msgid "Backup"
-msgstr "Sauvegarde"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:22
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:53
+msgctxt "@label"
+msgid "Draft"
+msgstr "Ébauche"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:123
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup without having proper data or meta data."
-msgstr "A essayé de restaurer une sauvegarde Cura sans disposer de données ou de métadonnées appropriées."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:23
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:54
+msgctxt "@text"
+msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
+msgstr "L'ébauche du profil est conçue pour imprimer les prototypes initiaux et la validation du concept dans le but de réduire considérablement le temps d'impression."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:134
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup that is higher than the current version."
-msgstr "A essayé de restaurer une sauvegarde Cura supérieure à la version actuelle."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
+msgctxt "@label"
+msgid "The printer(s) below cannot be connected because they are part of a group"
+msgstr "Les imprimantes ci-dessous ne peuvent pas être connectées car elles font partie d'un groupe"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:98
-msgctxt "@info:status"
-msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
-msgstr "La hauteur du volume d'impression a été réduite en raison de la valeur du paramètre « Séquence d'impression » afin d'éviter que le portique ne heurte les modèles imprimés."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
+msgctxt "@label"
+msgid "Available networked printers"
+msgstr "Imprimantes en réseau disponibles"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:100
-msgctxt "@info:title"
-msgid "Build Volume"
-msgstr "Volume d'impression"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/ExtrudersModel.py:211
+msgctxt "@menuitem"
+msgid "Not overridden"
+msgstr "Pas écrasé"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:107
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:107
 msgctxt "@title:window"
 msgid "Cura can't start"
 msgstr "Échec du démarrage de Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:113
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:113
 msgctxt "@label crash message"
 msgid ""
 "<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
@@ -180,32 +213,32 @@ msgstr ""
 "                    <p>Veuillez nous envoyer ce rapport d'incident pour que nous puissions résoudre le problème.</p>\n"
 "                "
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:122
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:122
 msgctxt "@action:button"
 msgid "Send crash report to Ultimaker"
 msgstr "Envoyer le rapport de d'incident à Ultimaker"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:125
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:125
 msgctxt "@action:button"
 msgid "Show detailed crash report"
 msgstr "Afficher le rapport d'incident détaillé"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:129
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:129
 msgctxt "@action:button"
 msgid "Show configuration folder"
 msgstr "Afficher le dossier de configuration"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:140
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:140
 msgctxt "@action:button"
 msgid "Backup and Reset Configuration"
 msgstr "Sauvegarder et réinitialiser la configuration"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:171
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:171
 msgctxt "@title:window"
 msgid "Crash Report"
 msgstr "Rapport d'incident"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:190
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:190
 msgctxt "@label crash message"
 msgid ""
 "<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
@@ -216,1078 +249,780 @@ msgstr ""
 "            <p>Veuillez utiliser le bouton « Envoyer rapport » pour publier automatiquement un rapport d'erreur sur nos serveurs</p>\n"
 "        "
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:198
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:198
 msgctxt "@title:groupbox"
 msgid "System information"
 msgstr "Informations système"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:207
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:207
 msgctxt "@label unknown version of Cura"
 msgid "Unknown"
 msgstr "Inconnu"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:228
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:228
 msgctxt "@label Cura version number"
 msgid "Cura version"
 msgstr "Version Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:229
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:229
 msgctxt "@label"
 msgid "Cura language"
 msgstr "Langue de Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:230
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:230
 msgctxt "@label"
 msgid "OS language"
 msgstr "Langue du SE"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:231
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:231
 msgctxt "@label Type of platform"
 msgid "Platform"
 msgstr "Plate-forme"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:232
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:232
 msgctxt "@label"
 msgid "Qt version"
 msgstr "Version Qt"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:233
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:233
 msgctxt "@label"
 msgid "PyQt version"
 msgstr "Version PyQt"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:234
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:234
 msgctxt "@label OpenGL version"
 msgid "OpenGL"
 msgstr "OpenGL"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:264
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:264
 msgctxt "@label"
 msgid "Not yet initialized<br/>"
 msgstr "Pas encore initialisé<br/>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:267
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:267
 #, python-brace-format
 msgctxt "@label OpenGL version"
 msgid "<li>OpenGL Version: {version}</li>"
 msgstr "<li>Version OpenGL : {version}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:268
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:268
 #, python-brace-format
 msgctxt "@label OpenGL vendor"
 msgid "<li>OpenGL Vendor: {vendor}</li>"
 msgstr "<li>Revendeur OpenGL : {vendor}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:269
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:269
 #, python-brace-format
 msgctxt "@label OpenGL renderer"
 msgid "<li>OpenGL Renderer: {renderer}</li>"
 msgstr "<li>Moteur de rendu OpenGL : {renderer}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:303
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:303
 msgctxt "@title:groupbox"
 msgid "Error traceback"
 msgstr "Retraçage de l'erreur"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:389
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:389
 msgctxt "@title:groupbox"
 msgid "Logs"
 msgstr "Journaux"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:417
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:417
 msgctxt "@action:button"
 msgid "Send report"
 msgstr "Envoyer rapport"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:521
-msgctxt "@info:progress"
-msgid "Loading machines..."
-msgstr "Chargement des machines..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:528
-msgctxt "@info:progress"
-msgid "Setting up preferences..."
-msgstr "Configuration des préférences..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:657
-msgctxt "@info:progress"
-msgid "Initializing Active Machine..."
-msgstr "Initialisation de la machine active..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:788
-msgctxt "@info:progress"
-msgid "Initializing machine manager..."
-msgstr "Initialisation du gestionnaire de machine..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:802
-msgctxt "@info:progress"
-msgid "Initializing build volume..."
-msgstr "Initialisation du volume de fabrication..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:870
-msgctxt "@info:progress"
-msgid "Setting up scene..."
-msgstr "Préparation de la scène..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:906
-msgctxt "@info:progress"
-msgid "Loading interface..."
-msgstr "Chargement de l'interface..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:911
-msgctxt "@info:progress"
-msgid "Initializing engine..."
-msgstr "Initialisation du moteur..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1221
-#, python-format
-msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
-msgid "%(width).1f x %(depth).1f x %(height).1f mm"
-msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1777
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
-msgstr "Un seul fichier G-Code peut être chargé à la fois. Importation de {0} sautée"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1778 /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:188 /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242 /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+#: /mnt/projects/ultimaker/cura/Cura/cura/API/Account.py:179
 msgctxt "@info:title"
-msgid "Warning"
-msgstr "Avertissement"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1787
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
-msgstr "Impossible d'ouvrir un autre fichier si le G-Code est en cours de chargement. Importation de {0} sautée"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1788 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:146 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:153 /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
-msgctxt "@info:title"
-msgid "Error"
-msgstr "Erreur"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:26
-msgctxt "@info:status"
-msgid "Multiplying and placing objects"
-msgstr "Multiplication et placement d'objets"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:28
-msgctxt "@info:title"
-msgid "Placing Objects"
-msgstr "Placement des objets"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:77
-msgctxt "@info:title"
-msgid "Placing Object"
-msgstr "Placement de l'objet"
+msgid "Login failed"
+msgstr "La connexion a échoué"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationHelpers.py:90
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationHelpers.py:92
 msgctxt "@message"
 msgid "Could not read response."
 msgstr "Impossible de lire la réponse."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:74
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:187
+msgctxt "@info"
+msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
+msgstr "Impossible de lancer une nouvelle procédure de connexion. Vérifiez si une autre tentative de connexion est toujours active."
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:242
+msgctxt "@info"
+msgid "Unable to reach the Ultimaker account server."
+msgstr "Impossible d’atteindre le serveur du compte Ultimaker."
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:74
 msgctxt "@message"
 msgid "The provided state is not correct."
 msgstr "L'état fourni n'est pas correct."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:85
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:85
 msgctxt "@message"
 msgid "Please give the required permissions when authorizing this application."
 msgstr "Veuillez donner les permissions requises lors de l'autorisation de cette application."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:92
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:92
 msgctxt "@message"
 msgid "Something unexpected happened when trying to log in, please try again."
 msgstr "Une erreur s'est produite lors de la connexion, veuillez réessayer."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:187
-msgctxt "@info"
-msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
-msgstr "Impossible de lancer une nouvelle procédure de connexion. Vérifiez si une autre tentative de connexion est toujours active."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242
-msgctxt "@info"
-msgid "Unable to reach the Ultimaker account server."
-msgstr "Impossible d’atteindre le serveur du compte Ultimaker."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:205 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:132
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:205
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:132
 msgctxt "@title:window"
 msgid "File Already Exists"
 msgstr "Le fichier existe déjà"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:206 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:133
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:206
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:133
 #, python-brace-format
 msgctxt "@label Don't translate the XML tag <filename>!"
 msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
 msgstr "Le fichier <filename>{0}</filename> existe déjà. Êtes-vous sûr de vouloir le remplacer ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:452 /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:455
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:456
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:459
 msgctxt "@info:status"
 msgid "Invalid file URL:"
 msgstr "URL de fichier invalide :"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:144
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:713
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
+msgctxt "@label"
+msgid "Nozzle"
+msgstr "Buse"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:856
+msgctxt "@info:message Followed by a list of settings."
+msgid "Settings have been changed to match the current availability of extruders:"
+msgstr "Les paramètres ont été modifiés pour correspondre aux extrudeuses actuellement disponibles :"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:858
+msgctxt "@info:title"
+msgid "Settings updated"
+msgstr "Paramètres mis à jour"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:1478
+msgctxt "@info:title"
+msgid "Extruder(s) Disabled"
+msgstr "Extrudeuse(s) désactivée(s)"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:144
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "Échec de l'exportation du profil vers <filename>{0}</filename> : <message>{1}</message>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:151
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:151
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
 msgstr "Échec de l'exportation du profil vers <filename>{0}</filename> : le plug-in du générateur a rapporté une erreur."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:156
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:156
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Exported profile to <filename>{0}</filename>"
 msgstr "Profil exporté vers <filename>{0}</filename>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:157
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:157
 msgctxt "@info:title"
 msgid "Export succeeded"
 msgstr "L'exportation a réussi"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:188
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:188
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>: {1}"
 msgstr "Impossible d'importer le profil depuis <filename>{0}</filename> : {1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:192
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:192
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
 msgstr "Impossible d'importer le profil depuis <filename>{0}</filename> avant l'ajout d'une imprimante."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:207
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:207
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "No custom profile to import in file <filename>{0}</filename>"
 msgstr "Aucun profil personnalisé à importer dans le fichier <filename>{0}</filename>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:211
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:211
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr "Échec de l'importation du profil depuis le fichier <filename>{0}</filename> :"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:235 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:245
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:235
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:245
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
 msgstr "Le profil <filename>{0}</filename> contient des données incorrectes ; échec de l'importation."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:338
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:338
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr "Échec de l'importation du profil depuis le fichier <filename>{0}</filename> :"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:342
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:342
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Successfully imported profile {0}."
 msgstr "Importation du profil {0} réussie."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:349
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:349
 #, python-brace-format
 msgctxt "@info:status"
 msgid "File {0} does not contain any valid profile."
 msgstr "Le fichier {0} ne contient pas de profil valide."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:352
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:352
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Profile {0} has an unknown file type or is corrupted."
 msgstr "Le profil {0} est un type de fichier inconnu ou est corrompu."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:423
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:426
 msgctxt "@label"
 msgid "Custom profile"
 msgstr "Personnaliser le profil"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:439
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:442
 msgctxt "@info:status"
 msgid "Profile is missing a quality type."
 msgstr "Il manque un type de qualité au profil."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:443
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:446
 msgctxt "@info:status"
-msgid "Global stack is missing."
-msgstr "Il manque la pile globale."
+msgid "There is no active printer yet."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:449
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:452
 msgctxt "@info:status"
 msgid "Unable to add the profile."
 msgstr "Impossible d'ajouter le profil."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:463
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:466
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
 msgstr "Le type de qualité « {0} » n'est pas compatible avec la définition actuelle de la machine active « {1} »."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:468
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:471
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
 msgstr "Avertissement : le profil n'est pas visible car son type de qualité « {0} » n'est pas disponible pour la configuration actuelle. Passez à une combinaison matériau/buse qui peut utiliser ce type de qualité."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/cura_empty_instance_containers.py:36
 msgctxt "@info:not supported profile"
 msgid "Not supported"
 msgstr "Non pris en charge"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:55
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/cura_empty_instance_containers.py:55
 msgctxt "@info:No intent profile selected"
 msgid "Default"
 msgstr "Default"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:712 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
-msgctxt "@label"
-msgid "Nozzle"
-msgstr "Buse"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:860
-msgctxt "@info:message Followed by a list of settings."
-msgid "Settings have been changed to match the current availability of extruders:"
-msgstr "Les paramètres ont été modifiés pour correspondre aux extrudeuses actuellement disponibles :"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:24
+msgctxt "@info:status"
+msgid "Finding new location for objects"
+msgstr "Recherche d'un nouvel emplacement pour les objets"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:862
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:28
 msgctxt "@info:title"
-msgid "Settings updated"
-msgstr "Paramètres mis à jour"
+msgid "Finding Location"
+msgstr "Recherche d'emplacement"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1447
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:41
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:76
+msgctxt "@info:status"
+msgid "Unable to find a location within the build volume for all objects"
+msgstr "Impossible de trouver un emplacement dans le volume d'impression pour tous les objets"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:42
 msgctxt "@info:title"
-msgid "Extruder(s) Disabled"
-msgstr "Extrudeuse(s) désactivée(s)"
+msgid "Can't Find Location"
+msgstr "Impossible de trouver un emplacement"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/ObjectsModel.py:69
+#, python-brace-format
+msgctxt "@label"
+msgid "Group #{group_nr}"
+msgstr "Groupe nº {group_nr}"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:17 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:48
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WhatsNewPagesModel.py:55
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:268
 msgctxt "@action:button"
-msgid "Add"
-msgstr "Ajouter"
+msgid "Skip"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:26 /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:263
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WhatsNewPagesModel.py:60
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:174
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:127
 msgctxt "@action:button"
-msgid "Finish"
-msgstr "Fin"
+msgid "Close"
+msgstr "Fermer"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:33 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:441 /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:234 /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:87
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:56
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:259
 msgctxt "@action:button"
-msgid "Cancel"
-msgstr "Annuler"
+msgid "Next"
+msgstr "Suivant"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/ObjectsModel.py:69
-#, python-brace-format
-msgctxt "@label"
-msgid "Group #{group_nr}"
-msgstr "Groupe nº {group_nr}"
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:272
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:26
+msgctxt "@action:button"
+msgid "Finish"
+msgstr "Fin"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:83
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:82
 msgctxt "@tooltip"
 msgid "Outer Wall"
 msgstr "Paroi externe"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:84
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:83
 msgctxt "@tooltip"
 msgid "Inner Walls"
 msgstr "Parois internes"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:85
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:84
 msgctxt "@tooltip"
 msgid "Skin"
 msgstr "Couche extérieure"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:86
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:85
 msgctxt "@tooltip"
 msgid "Infill"
 msgstr "Remplissage"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:87
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:86
 msgctxt "@tooltip"
 msgid "Support Infill"
 msgstr "Remplissage du support"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:88
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:87
 msgctxt "@tooltip"
 msgid "Support Interface"
 msgstr "Interface du support"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:89
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:88
 msgctxt "@tooltip"
 msgid "Support"
 msgstr "Support"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:90
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:89
 msgctxt "@tooltip"
 msgid "Skirt"
 msgstr "Jupe"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:91
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:90
 msgctxt "@tooltip"
 msgid "Prime Tower"
 msgstr "Tour primaire"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:92
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:91
 msgctxt "@tooltip"
 msgid "Travel"
 msgstr "Déplacement"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:93
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:92
 msgctxt "@tooltip"
 msgid "Retractions"
 msgstr "Rétractions"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:94
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:93
 msgctxt "@tooltip"
 msgid "Other"
 msgstr "Autre"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:56
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:48
 msgctxt "@action:button"
-msgid "Next"
-msgstr "Suivant"
+msgid "Add"
+msgstr "Ajouter"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:17 /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185 /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128 /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:173 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:127
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:445
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:234
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:82
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292
 msgctxt "@action:button"
-msgid "Close"
-msgstr "Fermer"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:31
-msgctxt "@info:title"
-msgid "3D Model Assistant"
-msgstr "Assistant de modèle 3D"
+msgid "Cancel"
+msgstr "Annuler"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:96
-#, python-brace-format
+#: /mnt/projects/ultimaker/cura/Cura/cura/BuildVolume.py:98
 msgctxt "@info:status"
-msgid ""
-"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
-msgstr ""
-"<p>Un ou plusieurs modèles 3D peuvent ne pas s'imprimer de manière optimale en raison de la taille du modèle et de la configuration matérielle :</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Découvrez comment optimiser la qualité et la fiabilité de l'impression.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">Consultez le guide de qualité d'impression</a></p>"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:535
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
-msgstr "Le fichier projet <filename>{0}</filename> contient un type de machine inconnu <message>{1}</message>. Impossible d'importer la machine. Les modèles seront importés à la place."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:538
-msgctxt "@info:title"
-msgid "Open Project File"
-msgstr "Ouvrir un fichier de projet"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:634
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
-msgstr "Le fichier de projet <filename>{0}</filename> est soudainement inaccessible : <message>{1}</message>."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:635
-msgctxt "@info:title"
-msgid "Can't Open Project File"
-msgstr "Impossible d'ouvrir le fichier de projet"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:686
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tag <filename>!"
-msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
-msgstr "Le fichier de projet <filename>{0}</filename> a été réalisé en utilisant des profils inconnus de cette version d'Ultimaker Cura."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:203
-msgctxt "@title:tab"
-msgid "Recommended"
-msgstr "Recommandé"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:205
-msgctxt "@title:tab"
-msgid "Custom"
-msgstr "Personnalisé"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:27 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:33
-msgctxt "@item:inlistbox"
-msgid "3MF File"
-msgstr "Fichier 3MF"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
-msgctxt "@error:zip"
-msgid "3MF Writer plug-in is corrupt."
-msgstr "Le plug-in 3MF Writer est corrompu."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59 /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
-msgctxt "@error:zip"
-msgid "No permission to write the workspace here."
-msgstr "Aucune autorisation d'écrire l'espace de travail ici."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
-msgctxt "@error:zip"
-msgid "The operating system does not allow saving a project file to this location or with this file name."
-msgstr "Le système d'exploitation ne permet pas d'enregistrer un fichier de projet à cet emplacement ou avec ce nom de fichier."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:185
-msgctxt "@error:zip"
-msgid "Error writing 3mf file."
-msgstr "Erreur d'écriture du fichier 3MF."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "3MF file"
-msgstr "Fichier 3MF"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:34
-msgctxt "@item:inlistbox"
-msgid "Cura Project 3MF file"
-msgstr "Projet Cura fichier 3MF"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/AMFReader/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "AMF File"
-msgstr "Fichier AMF"
+msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
+msgstr "La hauteur du volume d'impression a été réduite en raison de la valeur du paramètre « Séquence d'impression » afin d'éviter que le portique ne heurte les modèles imprimés."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+#: /mnt/projects/ultimaker/cura/Cura/cura/BuildVolume.py:100
 msgctxt "@info:title"
-msgid "Backups"
-msgstr "Sauvegardes"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27
-msgctxt "@info:backup_status"
-msgid "There was an error while uploading your backup."
-msgstr "Une erreur s’est produite lors du téléchargement de votre sauvegarde."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47
-msgctxt "@info:backup_status"
-msgid "Creating your backup..."
-msgstr "Création de votre sauvegarde..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54
-msgctxt "@info:backup_status"
-msgid "There was an error while creating your backup."
-msgstr "Une erreur s'est produite lors de la création de votre sauvegarde."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58
-msgctxt "@info:backup_status"
-msgid "Uploading your backup..."
-msgstr "Téléchargement de votre sauvegarde..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68
-msgctxt "@info:backup_status"
-msgid "Your backup has finished uploading."
-msgstr "Le téléchargement de votre sauvegarde est terminé."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107
-msgctxt "@error:file_size"
-msgid "The backup exceeds the maximum file size."
-msgstr "La sauvegarde dépasse la taille de fichier maximale."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:82 /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
-msgctxt "@info:backup_status"
-msgid "There was an error trying to restore your backup."
-msgstr "Une erreur s’est produite lors de la tentative de restauration de votre sauvegarde."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
-msgctxt "@item:inmenu"
-msgid "Manage backups"
-msgstr "Gérer les sauvegardes"
+msgid "Build Volume"
+msgstr "Volume d'impression"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356
-msgctxt "@info:status"
-msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
-msgstr "Impossible de découper le matériau actuel, car celui-ci est incompatible avec la machine ou la configuration sélectionnée."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:113
+msgctxt "@info:backup_failed"
+msgid "Could not create archive from user data directory: {}"
+msgstr "Impossible de créer une archive à partir du répertoire de données de l'utilisateur : {}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:387 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:411 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:420
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:441
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:119
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
 msgctxt "@info:title"
-msgid "Unable to slice"
-msgstr "Impossible de découper"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:386
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice with the current settings. The following settings have errors: {0}"
-msgstr "Impossible de couper avec les paramètres actuels. Les paramètres suivants contiennent des erreurs : {0}"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:410
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
-msgstr "Impossible de couper en raison de certains paramètres par modèle. Les paramètres suivants contiennent des erreurs sur un ou plusieurs modèles : {error_labels}"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:419
-msgctxt "@info:status"
-msgid "Unable to slice because the prime tower or prime position(s) are invalid."
-msgstr "Impossible de couper car la tour primaire ou la (les) position(s) d'amorçage ne sont pas valides."
+msgid "Backup"
+msgstr "Sauvegarde"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
-#, python-format
-msgctxt "@info:status"
-msgid "Unable to slice because there are objects associated with disabled Extruder %s."
-msgstr "Impossible de couper car il existe des objets associés à l'extrudeuse désactivée %s."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:132
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup without having proper data or meta data."
+msgstr "A essayé de restaurer une sauvegarde Cura sans disposer de données ou de métadonnées appropriées."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437
-msgctxt "@info:status"
-msgid ""
-"Please review settings and check if your models:\n"
-"- Fit within the build volume\n"
-"- Are assigned to an enabled extruder\n"
-"- Are not all set as modifier meshes"
-msgstr ""
-"Veuillez vérifier les paramètres et si vos modèles :\n"
-"- S'intègrent dans le volume de fabrication\n"
-"- Sont affectés à un extrudeur activé\n"
-"- N sont pas tous définis comme des mailles de modificateur"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:143
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup that is higher than the current version."
+msgstr "A essayé de restaurer une sauvegarde Cura supérieure à la version actuelle."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:26
 msgctxt "@info:status"
-msgid "Processing Layers"
-msgstr "Traitement des couches"
+msgid "Multiplying and placing objects"
+msgstr "Multiplication et placement d'objets"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:28
 msgctxt "@info:title"
-msgid "Information"
-msgstr "Informations"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileReader/__init__.py:14 /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileWriter/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura Profile"
-msgstr "Profil Cura"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
-msgctxt "@info"
-msgid "Could not access update information."
-msgstr "Impossible d'accéder aux informations de mise à jour."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
-#, python-brace-format
-msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
-msgid "New features or bug-fixes may be available for your {machine_name}! If not already at the latest version, it is recommended to update the firmware on your printer to version {latest_version}."
-msgstr "De nouvelles fonctionnalités ou des correctifs de bugs sont disponibles pour votre {machine_name} ! Si vous ne possédez pas la dernière version disponible, il est recommandé de mettre à jour le micrologiciel sur votre imprimante avec la version {latest_version}."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
-#, python-format
-msgctxt "@info:title The %s gets replaced with the printer name."
-msgid "New %s firmware available"
-msgstr "Nouveau firmware %s disponible"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
-msgctxt "@action:button"
-msgid "How to update"
-msgstr "Comment effectuer la mise à jour"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
-msgctxt "@action"
-msgid "Update Firmware"
-msgstr "Mettre à jour le firmware"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzReader/__init__.py:17 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/__init__.py:17
-msgctxt "@item:inlistbox"
-msgid "Compressed G-code File"
-msgstr "Fichier G-Code compressé"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
-msgctxt "@error:not supported"
-msgid "GCodeGzWriter does not support text mode."
-msgstr "GCodeGzWriter ne prend pas en charge le mode texte."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeProfileReader/__init__.py:14 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:14 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/__init__.py:16
-msgctxt "@item:inlistbox"
-msgid "G-code File"
-msgstr "Fichier GCode"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:347
-msgctxt "@info:status"
-msgid "Parsing G-code"
-msgstr "Analyse du G-Code"
+msgid "Placing Objects"
+msgstr "Placement des objets"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:349 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:503
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:77
 msgctxt "@info:title"
-msgid "G-code Details"
-msgstr "Détails G-Code"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:501
-msgctxt "@info:generic"
-msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
-msgstr "Assurez-vous que le g-code est adapté à votre imprimante et à la configuration de l'imprimante avant d'y envoyer le fichier. La représentation du g-code peut ne pas être exacte."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "G File"
-msgstr "Fichier G"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:74
-msgctxt "@error:not supported"
-msgid "GCodeWriter does not support non-text mode."
-msgstr "GCodeWriter ne prend pas en charge le mode non-texte."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:80 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:96
-msgctxt "@warning:status"
-msgid "Please prepare G-code before exporting."
-msgstr "Veuillez préparer le G-Code avant d'exporter."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "JPG Image"
-msgstr "Image JPG"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "JPEG Image"
-msgstr "Image JPEG"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "PNG Image"
-msgstr "Image PNG"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "BMP Image"
-msgstr "Image BMP"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:30
-msgctxt "@item:inlistbox"
-msgid "GIF Image"
-msgstr "Image GIF"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/LegacyProfileReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura 15.04 profiles"
-msgstr "Profils Cura 15.04"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
-msgctxt "@action"
-msgid "Machine Settings"
-msgstr "Paramètres de la machine"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/__init__.py:14
-msgctxt "@item:inmenu"
-msgid "Monitor"
-msgstr "Surveiller"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:14
-msgctxt "@label"
-msgid "Per Model Settings"
-msgstr "Paramètres par modèle"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:15
-msgctxt "@info:tooltip"
-msgid "Configure Per Model Settings"
-msgstr "Configurer les paramètres par modèle"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
-msgctxt "@item:inmenu"
-msgid "Post Processing"
-msgstr "Post-traitement"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
-msgctxt "@item:inmenu"
-msgid "Modify G-Code"
-msgstr "Modifier le G-Code"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PrepareStage/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Prepare"
-msgstr "Préparer"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PreviewStage/__init__.py:13
-msgctxt "@item:inmenu"
-msgid "Preview"
-msgstr "Aperçu"
+msgid "Placing Object"
+msgstr "Placement de l'objet"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Save to Removable Drive"
 msgstr "Enregistrer sur un lecteur amovible"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "Save to Removable Drive {0}"
 msgstr "Enregistrer sur un lecteur amovible {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
 msgctxt "@info:status"
 msgid "There are no file formats available to write with!"
 msgstr "Aucun format de fichier n'est disponible pour écriture !"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
 #, python-brace-format
 msgctxt "@info:progress Don't translate the XML tags <filename>!"
 msgid "Saving to Removable Drive <filename>{0}</filename>"
 msgstr "Enregistrement sur le lecteur amovible <filename>{0}</filename>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
 msgctxt "@info:title"
 msgid "Saving"
 msgstr "Enregistrement"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106 /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "Impossible d'enregistrer <filename>{0}</filename> : <message>{1}</message>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:125
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:125
 #, python-brace-format
 msgctxt "@info:status Don't translate the tag {device}!"
 msgid "Could not find a file name when trying to write to {device}."
 msgstr "Impossible de trouver un nom de fichier lors d'une tentative d'écriture sur {device}."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138 /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Could not save to removable drive {0}: {1}"
 msgstr "Impossible d'enregistrer sur le lecteur {0}: {1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Saved to Removable Drive {0} as {1}"
 msgstr "Enregistré sur le lecteur amovible {0} sous {1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
 msgctxt "@info:title"
 msgid "File Saved"
 msgstr "Fichier enregistré"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
 msgctxt "@action:button"
 msgid "Eject"
 msgstr "Ejecter"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
 #, python-brace-format
 msgctxt "@action"
 msgid "Eject removable device {0}"
 msgstr "Ejecter le lecteur amovible {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Ejected {0}. You can now safely remove the drive."
 msgstr "Lecteur {0} éjecté. Vous pouvez maintenant le retirer en tout sécurité."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
 msgctxt "@info:title"
 msgid "Safely Remove Hardware"
 msgstr "Retirez le lecteur en toute sécurité"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Failed to eject {0}. Another program may be using the drive."
 msgstr "Impossible d'éjecter {0}. Un autre programme utilise peut-être ce lecteur."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
 msgctxt "@item:intext"
 msgid "Removable Drive"
 msgstr "Lecteur amovible"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:121
-msgctxt "@info:status"
-msgid "Cura does not accurately display layers when Wire Printing is enabled."
-msgstr "Cura n'affiche pas les couches avec précision lorsque l'impression filaire est activée."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:122
-msgctxt "@info:title"
-msgid "Simulation View"
-msgstr "Vue simulation"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123
-msgctxt "@info:status"
-msgid "Nothing is shown because you need to slice first."
-msgstr "Rien ne s'affiche car vous devez d'abord découper."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123
-msgctxt "@info:title"
-msgid "No layers to show"
-msgstr "Pas de couches à afficher"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:124 /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:73
-msgctxt "@info:option_text"
-msgid "Do not show this message again"
-msgstr "Ne plus afficher ce message"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/__init__.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/AMFReader/__init__.py:15
 msgctxt "@item:inlistbox"
-msgid "Layer view"
-msgstr "Vue en couches"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:70
-msgctxt "@info:status"
-msgid "Your model is not manifold. The highlighted areas indicate either missing or extraneous surfaces."
-msgstr "Votre modèle n'est pas fonctionnel. Les zones surlignées indiquent que des surfaces manquent ou sont étrangères."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:72
-msgctxt "@info:title"
-msgid "Model errors"
-msgstr "Erreurs du modèle"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Solid view"
-msgstr "Vue solide"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:12
-msgctxt "@label"
-msgid "Support Blocker"
-msgstr "Blocage des supports"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:13
-msgctxt "@info:tooltip"
-msgid "Create a volume in which supports are not printed."
-msgstr "Créer un volume dans lequel les supports ne sont pas imprimés."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
-msgctxt "@info:generic"
-msgid "Do you want to sync material and software packages with your account?"
-msgstr "Vous souhaitez synchroniser du matériel et des logiciels avec votre compte ?"
+msgid "AMF File"
+msgstr "Fichier AMF"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93
-msgctxt "@info:title"
-msgid "Changes detected from your Ultimaker account"
-msgstr "Changements détectés à partir de votre compte Ultimaker"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeProfileReader/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/__init__.py:16
+msgctxt "@item:inlistbox"
+msgid "G-code File"
+msgstr "Fichier GCode"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:146
-msgctxt "@action:button"
-msgid "Sync"
-msgstr "Synchroniser"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
+msgctxt "@action"
+msgid "Update Firmware"
+msgstr "Mettre à jour le firmware"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:89
-msgctxt "@info:generic"
-msgid "Syncing..."
-msgstr "Synchronisation..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/X3DReader/__init__.py:13
+msgctxt "@item:inlistbox"
+msgid "X3D File"
+msgstr "Fichier X3D"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
 msgctxt "@button"
 msgid "Decline"
 msgstr "Refuser"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
 msgctxt "@button"
 msgid "Agree"
 msgstr "Accepter"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
 msgctxt "@title:window"
 msgid "Plugin License Agreement"
 msgstr "Plug-in d'accord de licence"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38
 msgctxt "@button"
 msgid "Decline and remove from account"
 msgstr "Décliner et supprimer du compte"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:20
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:79
+msgctxt "@info:generic"
+msgid "{} plugins failed to download"
+msgstr "Échec de téléchargement des plugins {}"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:89
+msgctxt "@info:generic"
+msgid "Syncing..."
+msgstr "Synchronisation..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
+msgctxt "@info:title"
+msgid "Changes detected from your Ultimaker account"
+msgstr "Changements détectés à partir de votre compte Ultimaker"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:20
 msgctxt "@info:generic"
 msgid "You need to quit and restart {} before changes have effect."
 msgstr "Vous devez quitter et redémarrer {} avant que les changements apportés ne prennent effet."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:76
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
 msgctxt "@info:generic"
-msgid "{} plugins failed to download"
-msgstr "Échec de téléchargement des plugins {}"
+msgid "Do you want to sync material and software packages with your account?"
+msgstr "Vous souhaitez synchroniser du matériel et des logiciels avec votre compte ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:15
-msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
-msgid "Open Compressed Triangle Mesh"
-msgstr "Ouvrir le maillage triangulaire compressé"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:145
+msgctxt "@action:button"
+msgid "Sync"
+msgstr "Synchroniser"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:19
-msgctxt "@item:inlistbox"
-msgid "COLLADA Digital Asset Exchange"
-msgstr "COLLADA Digital Asset Exchange"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/__init__.py:14
+msgctxt "@label"
+msgid "Per Model Settings"
+msgstr "Paramètres par modèle"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:23
-msgctxt "@item:inlistbox"
-msgid "glTF Binary"
-msgstr "glTF binaire"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/__init__.py:15
+msgctxt "@info:tooltip"
+msgid "Configure Per Model Settings"
+msgstr "Configurer les paramètres par modèle"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:27
-msgctxt "@item:inlistbox"
-msgid "glTF Embedded JSON"
-msgstr "JSON incorporé glTF"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
+msgctxt "@item:inmenu"
+msgid "Post Processing"
+msgstr "Post-traitement"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:36
-msgctxt "@item:inlistbox"
-msgid "Stanford Triangle Format"
-msgstr "Format Triangle de Stanford"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
+msgctxt "@item:inmenu"
+msgid "Modify G-Code"
+msgstr "Modifier le G-Code"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:40
-msgctxt "@item:inlistbox"
-msgid "Compressed COLLADA Digital Asset Exchange"
-msgstr "COLLADA Digital Asset Exchange compressé"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:382
+msgctxt "@info:status"
+msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
+msgstr "Impossible de découper le matériau actuel, car celui-ci est incompatible avec la machine ou la configuration sélectionnée."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPReader/__init__.py:22 /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/__init__.py:28
-msgctxt "@item:inlistbox"
-msgid "Ultimaker Format Package"
-msgstr "Ultimaker Format Package"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:382
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:413
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:446
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
+msgctxt "@info:title"
+msgid "Unable to slice"
+msgstr "Impossible de découper"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:146
-msgctxt "@info:error"
-msgid "Can't write to UFP file:"
-msgstr "Impossible d'écrire dans le fichier UFP :"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:412
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice with the current settings. The following settings have errors: {0}"
+msgstr "Impossible de couper avec les paramètres actuels. Les paramètres suivants contiennent des erreurs : {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
-msgctxt "@action"
-msgid "Level build plate"
-msgstr "Nivellement du plateau"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:436
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
+msgstr "Impossible de couper en raison de certains paramètres par modèle. Les paramètres suivants contiennent des erreurs sur un ou plusieurs modèles : {error_labels}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
-msgctxt "@action"
-msgid "Select upgrades"
-msgstr "Sélectionner les mises à niveau"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:445
+msgctxt "@info:status"
+msgid "Unable to slice because the prime tower or prime position(s) are invalid."
+msgstr "Impossible de couper car la tour primaire ou la (les) position(s) d'amorçage ne sont pas valides."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:152
-msgctxt "@action:button"
-msgid "Print via cloud"
-msgstr "Imprimer via le cloud"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:454
+#, python-format
+msgctxt "@info:status"
+msgid "Unable to slice because there are objects associated with disabled Extruder %s."
+msgstr "Impossible de couper car il existe des objets associés à l'extrudeuse désactivée %s."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:153
-msgctxt "@properties:tooltip"
-msgid "Print via cloud"
-msgstr "Imprimer via le cloud"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:463
+msgctxt "@info:status"
+msgid ""
+"Please review settings and check if your models:\n"
+"- Fit within the build volume\n"
+"- Are assigned to an enabled extruder\n"
+"- Are not all set as modifier meshes"
+msgstr ""
+"Veuillez vérifier les paramètres et si vos modèles :\n"
+"- S'intègrent dans le volume de fabrication\n"
+"- Sont affectés à un extrudeur activé\n"
+"- N sont pas tous définis comme des mailles de modificateur"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
 msgctxt "@info:status"
-msgid "Connected via cloud"
-msgstr "Connecté via le cloud"
+msgid "Processing Layers"
+msgstr "Traitement des couches"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:264
-#, python-brace-format
-msgctxt "@error:send"
-msgid "Unknown error code when uploading print job: {0}"
-msgstr "Code d'erreur inconnu lors du téléchargement d'une tâche d'impression : {0}"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+msgctxt "@info:title"
+msgid "Information"
+msgstr "Informations"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
+msgctxt "@item:inmenu"
+msgid "USB printing"
+msgstr "Impression par USB"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print via USB"
+msgstr "Imprimer via USB"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
+msgctxt "@info:tooltip"
+msgid "Print via USB"
+msgstr "Imprimer via USB"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
+msgctxt "@info:status"
+msgid "Connected via USB"
+msgstr "Connecté via USB"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
+msgctxt "@label"
+msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
+msgstr "Une impression USB est en cours, la fermeture de Cura arrêtera cette impression. Êtes-vous sûr ?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
+msgctxt "@message"
+msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
+msgstr "Une impression est encore en cours. Cura ne peut pas démarrer une autre impression via USB tant que l'impression précédente n'est pas terminée."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
+msgctxt "@message"
+msgid "Print in Progress"
+msgstr "Impression en cours"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura Profile"
+msgstr "Profil Cura"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+msgctxt "@action"
+msgid "Connect via Network"
+msgstr "Connecter via le réseau"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
 msgctxt "info:status"
 msgid "New printer detected from your Ultimaker account"
 msgid_plural "New printers detected from your Ultimaker account"
 msgstr[0] "Nouvelle imprimante détectée à partir de votre compte Ultimaker"
 msgstr[1] "Nouvelles imprimantes détectées à partir de votre compte Ultimaker"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:238
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:238
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
 msgstr "Ajout de l'imprimante {name} ({model}) à partir de votre compte"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
 #, python-brace-format
 msgctxt "info:{0} gets replaced by a number of printers"
 msgid "... and {0} other"
@@ -1295,70 +1030,71 @@ msgid_plural "... and {0} others"
 msgstr[0] "... et {0} autre"
 msgstr[1] "... et {0} autres"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
 msgctxt "info:status"
 msgid "Printers added from Digital Factory:"
 msgstr "Imprimantes ajoutées à partir de Digital Factory :"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
 msgctxt "info:status"
 msgid "A cloud connection is not available for a printer"
 msgid_plural "A cloud connection is not available for some printers"
 msgstr[0] "Une connexion cloud n'est pas disponible pour une imprimante"
 msgstr[1] "Une connexion cloud n'est pas disponible pour certaines imprimantes"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:324
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:324
 msgctxt "info:status"
 msgid "This printer is not linked to the Digital Factory:"
 msgid_plural "These printers are not linked to the Digital Factory:"
 msgstr[0] "Cette imprimante n'est pas associée à Digital Factory :"
 msgstr[1] "Ces imprimantes ne sont pas associées à Digital Factory :"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
 msgstr "Ultimaker Digital Factory"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
 #, python-brace-format
 msgctxt "info:status"
 msgid "To establish a connection, please visit the {website_link}"
 msgstr "Pour établir une connexion, veuillez visiter le site {website_link}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
 msgctxt "@action:button"
 msgid "Keep printer configurations"
 msgstr "Conserver les configurations d'imprimante"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
 msgctxt "@action:button"
 msgid "Remove printers"
 msgstr "Supprimer des imprimantes"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "{printer_name} will be removed until the next account sync."
 msgstr "L'imprimante {printer_name} sera supprimée jusqu'à la prochaine synchronisation de compte."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
 msgstr "Pour supprimer {printer_name} définitivement, visitez le site {digital_factory_link}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "Are you sure you want to remove {printer_name} temporarily?"
 msgstr "Voulez-vous vraiment supprimer {printer_name} temporairement ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
 msgctxt "@title:window"
 msgid "Remove printers?"
 msgstr "Supprimer des imprimantes ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:463
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:463
 #, python-brace-format
 msgctxt "@label"
 msgid ""
@@ -1374,7 +1110,7 @@ msgstr[1] ""
 "Vous êtes sur le point de supprimer {0} imprimantes de Cura. Cette action est irréversible.\n"
 "Voulez-vous vraiment continuer ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468
 msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
@@ -1383,2090 +1119,2486 @@ msgstr ""
 "Vous êtes sur le point de supprimer toutes les imprimantes de Cura. Cette action est irréversible.\n"
 "Voulez-vous vraiment continuer ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
-msgctxt "@info:status"
-msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
-msgstr "Lancez et surveillez des impressions où que vous soyez avec votre compte Ultimaker."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:152
+msgctxt "@action:button"
+msgid "Print via cloud"
+msgstr "Imprimer via le cloud"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
-msgctxt "@info:status Ultimaker Cloud should not be translated."
-msgid "Connect to Ultimaker Digital Factory"
-msgstr "Se connecter à Ultimaker Digital Factory"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:153
+msgctxt "@properties:tooltip"
+msgid "Print via cloud"
+msgstr "Imprimer via le cloud"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
-msgctxt "@action"
-msgid "Get started"
-msgstr "Prise en main"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+msgctxt "@info:status"
+msgid "Connected via cloud"
+msgstr "Connecté via le cloud"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:264
+#, python-brace-format
+msgctxt "@error:send"
+msgid "Unknown error code when uploading print job: {0}"
+msgstr "Code d'erreur inconnu lors du téléchargement d'une tâche d'impression : {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
 msgctxt "@info:status"
-msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
-msgstr "Vous tentez de vous connecter à une imprimante qui n'exécute pas Ultimaker Connect. Veuillez mettre à jour l'imprimante avec le dernier micrologiciel."
+msgid "tomorrow"
+msgstr "demain"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
-msgctxt "@info:title"
-msgid "Update your printer"
-msgstr "Mettre à jour votre imprimante"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+msgctxt "@info:status"
+msgid "today"
+msgstr "aujourd'hui"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
-#, python-brace-format
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
 msgctxt "@info:status"
-msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
-msgstr "Cura a détecté des profils de matériau qui ne sont pas encore installés sur l'imprimante hôte du groupe {0}."
+msgid "Sending Print Job"
+msgstr "Lancement d'une tâche d'impression"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
-msgctxt "@info:title"
-msgid "Sending materials to printer"
-msgstr "Envoi de matériaux à l'imprimante"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
+msgctxt "@info:status"
+msgid "Uploading print job to printer."
+msgstr "Téléchargement de la tâche d'impression sur l'imprimante."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
 #, python-brace-format
 msgctxt "@info:status"
 msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
 msgstr "Vous tentez de vous connecter à {0} mais ce n'est pas l'hôte de groupe. Vous pouvez visiter la page Web pour la configurer en tant qu'hôte de groupe."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
 msgctxt "@info:title"
 msgid "Not a group host"
 msgstr "Pas un hôte de groupe"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
 msgctxt "@action"
 msgid "Configure group"
 msgstr "Configurer le groupe"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
+msgctxt "@info:status"
+msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
+msgstr "Lancez et surveillez des impressions où que vous soyez avec votre compte Ultimaker."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
+msgctxt "@info:status Ultimaker Cloud should not be translated."
+msgid "Connect to Ultimaker Digital Factory"
+msgstr "Se connecter à Ultimaker Digital Factory"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
+msgctxt "@action"
+msgid "Get started"
+msgstr "Prise en main"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
 msgctxt "@info:status"
 msgid "Please wait until the current job has been sent."
 msgstr "Veuillez patienter jusqu'à ce que la tâche en cours ait été envoyée."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
 msgctxt "@info:title"
 msgid "Print error"
 msgstr "Erreur d'impression"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
 msgctxt "@info:text"
 msgid "Could not upload the data to the printer."
 msgstr "Impossible de transférer les données à l'imprimante."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
 msgctxt "@info:title"
 msgid "Network error"
 msgstr "Erreur de réseau"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Sending Print Job"
-msgstr "Lancement d'une tâche d'impression"
+msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
+msgstr "Cura a détecté des profils de matériau qui ne sont pas encore installés sur l'imprimante hôte du groupe {0}."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
-msgctxt "@info:status"
-msgid "Uploading print job to printer."
-msgstr "Téléchargement de la tâche d'impression sur l'imprimante."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
+msgctxt "@info:title"
+msgid "Sending materials to printer"
+msgstr "Envoi de matériaux à l'imprimante"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
 msgid "Print job queue is full. The printer can't accept a new job."
 msgstr "La file d'attente pour les tâches d'impression est pleine. L'imprimante ne peut pas accepter une nouvelle tâche."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
 msgctxt "@info:title"
 msgid "Queue Full"
 msgstr "La file d'attente est pleine"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
 msgid "Print job was successfully sent to the printer."
 msgstr "L'envoi de la tâche d'impression à l'imprimante a réussi."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
 msgctxt "@info:title"
 msgid "Data Sent"
 msgstr "Données envoyées"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+msgctxt "@info:status"
+msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
+msgstr "Vous tentez de vous connecter à une imprimante qui n'exécute pas Ultimaker Connect. Veuillez mettre à jour l'imprimante avec le dernier micrologiciel."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
+msgctxt "@info:title"
+msgid "Update your printer"
+msgstr "Mettre à jour votre imprimante"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Print over network"
 msgstr "Imprimer sur le réseau"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
 msgctxt "@properties:tooltip"
 msgid "Print over network"
 msgstr "Imprimer sur le réseau"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
 msgctxt "@info:status"
 msgid "Connected over the network"
 msgstr "Connecté sur le réseau"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
 msgctxt "@action"
-msgid "Connect via Network"
-msgstr "Connecter via le réseau"
+msgid "Select upgrades"
+msgstr "Sélectionner les mises à niveau"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
-msgctxt "@info:status"
-msgid "tomorrow"
-msgstr "demain"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
+msgctxt "@action"
+msgid "Level build plate"
+msgstr "Nivellement du plateau"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
-msgctxt "@info:status"
-msgid "today"
-msgstr "aujourd'hui"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.py:203
+msgctxt "@title:tab"
+msgid "Recommended"
+msgstr "Recommandé"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
-msgctxt "@item:inmenu"
-msgid "USB printing"
-msgstr "Impression par USB"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.py:205
+msgctxt "@title:tab"
+msgid "Custom"
+msgstr "Personnalisé"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print via USB"
-msgstr "Imprimer via USB"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:535
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
+msgstr "Le fichier projet <filename>{0}</filename> contient un type de machine inconnu <message>{1}</message>. Impossible d'importer la machine. Les modèles seront importés à la place."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
-msgctxt "@info:tooltip"
-msgid "Print via USB"
-msgstr "Imprimer via USB"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:538
+msgctxt "@info:title"
+msgid "Open Project File"
+msgstr "Ouvrir un fichier de projet"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
-msgctxt "@info:status"
-msgid "Connected via USB"
-msgstr "Connecté via USB"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:634
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
+msgstr "Le fichier de projet <filename>{0}</filename> est soudainement inaccessible : <message>{1}</message>."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
-msgctxt "@label"
-msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
-msgstr "Une impression USB est en cours, la fermeture de Cura arrêtera cette impression. Êtes-vous sûr ?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:635
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:642
+msgctxt "@info:title"
+msgid "Can't Open Project File"
+msgstr "Impossible d'ouvrir le fichier de projet"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
-msgctxt "@message"
-msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
-msgstr "Une impression est encore en cours. Cura ne peut pas démarrer une autre impression via USB tant que l'impression précédente n'est pas terminée."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:641
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
-msgctxt "@message"
-msgid "Print in Progress"
-msgstr "Impression en cours"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:693
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tag <filename>!"
+msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
+msgstr "Le fichier de projet <filename>{0}</filename> a été réalisé en utilisant des profils inconnus de cette version d'Ultimaker Cura."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/X3DReader/__init__.py:13
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/__init__.py:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/__init__.py:33
 msgctxt "@item:inlistbox"
-msgid "X3D File"
-msgstr "Fichier X3D"
+msgid "3MF File"
+msgstr "Fichier 3MF"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/XRayView/__init__.py:12
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzWriter/__init__.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzReader/__init__.py:17
 msgctxt "@item:inlistbox"
-msgid "X-Ray view"
-msgstr "Visualisation par rayons X"
+msgid "Compressed G-code File"
+msgstr "Fichier G-Code compressé"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.qml:22
-msgctxt "@info:tooltip"
-msgid "Some things could be problematic in this print. Click to see tips for adjustment."
-msgstr "Certains éléments pourraient causer des problèmes à cette impression. Cliquez pour voir les conseils d'ajustement."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
+msgctxt "@error:not supported"
+msgid "GCodeGzWriter does not support text mode."
+msgstr "GCodeGzWriter ne prend pas en charge le mode texte."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:14
-msgctxt "@title:window"
-msgid "Open Project"
-msgstr "Ouvrir un projet"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.py:31
+msgctxt "@info:title"
+msgid "3D Model Assistant"
+msgstr "Assistant de modèle 3D"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:61
-msgctxt "@action:ComboBox Update/override existing profile"
-msgid "Update existing"
-msgstr "Mettre à jour l'existant"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.py:96
+#, python-brace-format
+msgctxt "@info:status"
+msgid ""
+"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+msgstr ""
+"<p>Un ou plusieurs modèles 3D peuvent ne pas s'imprimer de manière optimale en raison de la taille du modèle et de la configuration matérielle :</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Découvrez comment optimiser la qualité et la fiabilité de l'impression.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">Consultez le guide de qualité d'impression</a></p>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
-msgctxt "@action:ComboBox Save settings in a new profile"
-msgid "Create new"
-msgstr "Créer"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
+msgctxt "@info"
+msgid "Could not access update information."
+msgstr "Impossible d'accéder aux informations de mise à jour."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:74 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
-msgctxt "@action:title"
-msgid "Summary - Cura Project"
-msgstr "Résumé - Projet Cura"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#, python-brace-format
+msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
+msgid "New features or bug-fixes may be available for your {machine_name}! If not already at the latest version, it is recommended to update the firmware on your printer to version {latest_version}."
+msgstr "De nouvelles fonctionnalités ou des correctifs de bugs sont disponibles pour votre {machine_name} ! Si vous ne possédez pas la dernière version disponible, il est recommandé de mettre à jour le micrologiciel sur votre imprimante avec la version {latest_version}."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:96 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
-msgctxt "@action:label"
-msgid "Printer settings"
-msgstr "Paramètres de l'imprimante"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
+#, python-format
+msgctxt "@info:title The %s gets replaced with the printer name."
+msgid "New %s firmware available"
+msgstr "Nouveau firmware %s disponible"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:112
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the machine be resolved?"
-msgstr "Comment le conflit de la machine doit-il être résolu ?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
+msgctxt "@action:button"
+msgid "How to update"
+msgstr "Comment effectuer la mise à jour"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:165 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
-msgctxt "@action:label"
-msgid "Type"
-msgstr "Type"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "G File"
+msgstr "Fichier G"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:181 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
-msgctxt "@action:label"
-msgid "Printer Group"
-msgstr "Groupe d'imprimantes"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:347
+msgctxt "@info:status"
+msgid "Parsing G-code"
+msgstr "Analyse du G-Code"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:203 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
-msgctxt "@action:label"
-msgid "Profile settings"
-msgstr "Paramètres de profil"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:349
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:503
+msgctxt "@info:title"
+msgid "G-code Details"
+msgstr "Détails G-Code"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:219
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:501
+msgctxt "@info:generic"
+msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
+msgstr "Assurez-vous que le g-code est adapté à votre imprimante et à la configuration de l'imprimante avant d'y envoyer le fichier. La représentation du g-code peut ne pas être exacte."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SupportEraser/__init__.py:12
+msgctxt "@label"
+msgid "Support Blocker"
+msgstr "Blocage des supports"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SupportEraser/__init__.py:13
 msgctxt "@info:tooltip"
-msgid "How should the conflict in the profile be resolved?"
-msgstr "Comment le conflit du profil doit-il être résolu ?"
+msgid "Create a volume in which supports are not printed."
+msgstr "Créer un volume dans lequel les supports ne sont pas imprimés."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:239 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:349 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242
-msgctxt "@action:label"
-msgid "Name"
-msgstr "Nom"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:15
+msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
+msgid "Open Compressed Triangle Mesh"
+msgstr "Ouvrir le maillage triangulaire compressé"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:255 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
-msgctxt "@action:label"
-msgid "Intent"
-msgstr "Intent"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:19
+msgctxt "@item:inlistbox"
+msgid "COLLADA Digital Asset Exchange"
+msgstr "COLLADA Digital Asset Exchange"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:271 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
-msgctxt "@action:label"
-msgid "Not in profile"
-msgstr "Absent du profil"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:23
+msgctxt "@item:inlistbox"
+msgid "glTF Binary"
+msgstr "glTF binaire"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:276 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
-msgctxt "@action:label"
-msgid "%1 override"
-msgid_plural "%1 overrides"
-msgstr[0] "%1 écrasent"
-msgstr[1] "%1 écrase"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:27
+msgctxt "@item:inlistbox"
+msgid "glTF Embedded JSON"
+msgstr "JSON incorporé glTF"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:287
-msgctxt "@action:label"
-msgid "Derivative from"
-msgstr "Dérivé de"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:36
+msgctxt "@item:inlistbox"
+msgid "Stanford Triangle Format"
+msgstr "Format Triangle de Stanford"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:292
-msgctxt "@action:label"
-msgid "%1, %2 override"
-msgid_plural "%1, %2 overrides"
-msgstr[0] "%1, %2 écrasent"
-msgstr[1] "%1, %2 écrase"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:40
+msgctxt "@item:inlistbox"
+msgid "Compressed COLLADA Digital Asset Exchange"
+msgstr "COLLADA Digital Asset Exchange compressé"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:309
-msgctxt "@action:label"
-msgid "Material settings"
-msgstr "Paramètres du matériau"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPReader/__init__.py:22
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPWriter/__init__.py:28
+msgctxt "@item:inlistbox"
+msgid "Ultimaker Format Package"
+msgstr "Ultimaker Format Package"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:325
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the material be resolved?"
-msgstr "Comment le conflit du matériau doit-il être résolu ?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/LegacyProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura 15.04 profiles"
+msgstr "Profils Cura 15.04"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:369
-msgctxt "@action:label"
-msgid "Setting visibility"
-msgstr "Visibilité des paramètres"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PrepareStage/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Prepare"
+msgstr "Préparer"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:378
-msgctxt "@action:label"
-msgid "Mode"
-msgstr "Mode"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/__init__.py:14
+msgctxt "@item:inmenu"
+msgid "Monitor"
+msgstr "Surveiller"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:394
-msgctxt "@action:label"
-msgid "Visible settings:"
-msgstr "Paramètres visibles :"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/XRayView/__init__.py:12
+msgctxt "@item:inlistbox"
+msgid "X-Ray view"
+msgstr "Visualisation par rayons X"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:399
-msgctxt "@action:label"
-msgid "%1 out of %2"
-msgstr "%1 sur %2"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWriter.py:206
+msgctxt "@error:zip"
+msgid "Error writing 3mf file."
+msgstr "Erreur d'écriture du fichier 3MF."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:425
-msgctxt "@action:warning"
-msgid "Loading a project will clear all models on the build plate."
-msgstr "Le chargement d'un projet effacera tous les modèles sur le plateau."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "3MF file"
+msgstr "Fichier 3MF"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:453
-msgctxt "@action:button"
-msgid "Open"
-msgstr "Ouvrir"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/__init__.py:34
+msgctxt "@item:inlistbox"
+msgid "Cura Project 3MF file"
+msgstr "Projet Cura fichier 3MF"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
-msgctxt "@button"
-msgid "Want more?"
-msgstr "Vous en voulez plus ?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
+msgctxt "@error:zip"
+msgid "3MF Writer plug-in is corrupt."
+msgstr "Le plug-in 3MF Writer est corrompu."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
-msgctxt "@button"
-msgid "Backup Now"
-msgstr "Sauvegarder maintenant"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
+msgctxt "@error:zip"
+msgid "No permission to write the workspace here."
+msgstr "Aucune autorisation d'écrire l'espace de travail ici."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
-msgctxt "@checkbox:description"
-msgid "Auto Backup"
-msgstr "Sauvegarde automatique"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
+msgctxt "@error:zip"
+msgid "The operating system does not allow saving a project file to this location or with this file name."
+msgstr "Le système d'exploitation ne permet pas d'enregistrer un fichier de projet à cet emplacement ou avec ce nom de fichier."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
-msgctxt "@checkbox:description"
-msgid "Automatically create a backup each day that Cura is started."
-msgstr "Créez automatiquement une sauvegarde chaque jour où Cura est démarré."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PreviewStage/__init__.py:13
+msgctxt "@item:inmenu"
+msgid "Preview"
+msgstr "Aperçu"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
-msgctxt "@button"
-msgid "Restore"
-msgstr "Restaurer"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "Layer view"
+msgstr "Vue en couches"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
-msgctxt "@dialog:title"
-msgid "Delete Backup"
-msgstr "Supprimer la sauvegarde"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:124
+msgctxt "@info:status"
+msgid "Cura does not accurately display layers when Wire Printing is enabled."
+msgstr "Cura n'affiche pas les couches avec précision lorsque l'impression filaire est activée."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
-msgctxt "@dialog:info"
-msgid "Are you sure you want to delete this backup? This cannot be undone."
-msgstr "Êtes-vous sûr de vouloir supprimer cette sauvegarde ? Il est impossible d'annuler cette action."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:125
+msgctxt "@info:title"
+msgid "Simulation View"
+msgstr "Vue simulation"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
-msgctxt "@dialog:title"
-msgid "Restore Backup"
-msgstr "Restaurer la sauvegarde"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:126
+msgctxt "@info:status"
+msgid "Nothing is shown because you need to slice first."
+msgstr "Rien ne s'affiche car vous devez d'abord découper."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
-msgctxt "@dialog:info"
-msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
-msgstr "Vous devez redémarrer Cura avant que votre sauvegarde ne soit restaurée. Voulez-vous fermer Cura maintenant ?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:126
+msgctxt "@info:title"
+msgid "No layers to show"
+msgstr "Pas de couches à afficher"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
-msgctxt "@backuplist:label"
-msgid "Cura Version"
-msgstr "Version Cura"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:127
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:74
+msgctxt "@info:option_text"
+msgid "Do not show this message again"
+msgstr "Ne plus afficher ce message"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
-msgctxt "@backuplist:label"
-msgid "Machines"
-msgstr "Machines"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
+msgctxt "@action"
+msgid "Machine Settings"
+msgstr "Paramètres de la machine"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
-msgctxt "@backuplist:label"
-msgid "Materials"
-msgstr "Matériaux"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Solid view"
+msgstr "Vue solide"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
-msgctxt "@backuplist:label"
-msgid "Profiles"
-msgstr "Profils"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:71
+msgctxt "@info:status"
+msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
-msgctxt "@backuplist:label"
-msgid "Plugins"
-msgstr "Plug-ins"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:73
+msgctxt "@info:title"
+msgid "Model Errors"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/main.qml:25
-msgctxt "@title:window"
-msgid "Cura Backups"
-msgstr "Sauvegardes Cura"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:79
+msgctxt "@action:button"
+msgid "Learn more"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
-msgctxt "@title"
-msgid "My Backups"
-msgstr "Mes sauvegardes"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPWriter/UFPWriter.py:134
+msgctxt "@info:error"
+msgid "Can't write to UFP file:"
+msgstr "Impossible d'écrire dans le fichier UFP :"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
-msgctxt "@empty_state"
-msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
-msgstr "Vous n'avez actuellement aucune sauvegarde. Utilisez le bouton « Sauvegarder maintenant » pour en créer une."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:74
+msgctxt "@error:not supported"
+msgid "GCodeWriter does not support non-text mode."
+msgstr "GCodeWriter ne prend pas en charge le mode non-texte."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
-msgctxt "@backup_limit_info"
-msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
-msgstr "Pendant la phase de prévisualisation, vous ne pourrez voir qu'un maximum de 5 sauvegardes. Supprimez une sauvegarde pour voir les plus anciennes."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:96
+msgctxt "@warning:status"
+msgid "Please prepare G-code before exporting."
+msgstr "Veuillez préparer le G-Code avant d'exporter."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
-msgctxt "@description"
-msgid "Backup and synchronize your Cura settings."
-msgstr "Sauvegardez et synchronisez vos paramètres Cura."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "JPG Image"
+msgstr "Image JPG"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39 /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:68 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:125
-msgctxt "@button"
-msgid "Sign in"
-msgstr "Se connecter"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "JPEG Image"
+msgstr "Image JPEG"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:22
+msgctxt "@item:inlistbox"
+msgid "PNG Image"
+msgstr "Image PNG"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "BMP Image"
+msgstr "Image BMP"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:30
+msgctxt "@item:inlistbox"
+msgid "GIF Image"
+msgstr "Image GIF"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DriveApiService.py:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
+msgctxt "@info:backup_status"
+msgid "There was an error trying to restore your backup."
+msgstr "Une erreur s’est produite lors de la tentative de restauration de votre sauvegarde."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+msgctxt "@info:title"
+msgid "Backups"
+msgstr "Sauvegardes"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27
+msgctxt "@info:backup_status"
+msgid "There was an error while uploading your backup."
+msgstr "Une erreur s’est produite lors du téléchargement de votre sauvegarde."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47
+msgctxt "@info:backup_status"
+msgid "Creating your backup..."
+msgstr "Création de votre sauvegarde..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54
+msgctxt "@info:backup_status"
+msgid "There was an error while creating your backup."
+msgstr "Une erreur s'est produite lors de la création de votre sauvegarde."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58
+msgctxt "@info:backup_status"
+msgid "Uploading your backup..."
+msgstr "Téléchargement de votre sauvegarde..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68
+msgctxt "@info:backup_status"
+msgid "Your backup has finished uploading."
+msgstr "Le téléchargement de votre sauvegarde est terminé."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107
+msgctxt "@error:file_size"
+msgid "The backup exceeds the maximum file size."
+msgstr "La sauvegarde dépasse la taille de fichier maximale."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
+msgctxt "@item:inmenu"
+msgid "Manage backups"
+msgstr "Gérer les sauvegardes"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
 msgctxt "@title"
 msgid "Update Firmware"
 msgstr "Mettre à jour le firmware"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
 msgctxt "@label"
 msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
 msgstr "Le firmware est le logiciel fonctionnant directement dans votre imprimante 3D. Ce firmware contrôle les moteurs pas à pas, régule la température et surtout, fait que votre machine fonctionne."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
 msgctxt "@label"
 msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
 msgstr "Le firmware fourni avec les nouvelles imprimantes fonctionne, mais les nouvelles versions ont tendance à fournir davantage de fonctionnalités ainsi que des améliorations."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
 msgctxt "@action:button"
 msgid "Automatically upgrade Firmware"
 msgstr "Mise à niveau automatique du firmware"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
 msgctxt "@action:button"
 msgid "Upload custom Firmware"
 msgstr "Charger le firmware personnalisé"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
 msgctxt "@label"
 msgid "Firmware can not be updated because there is no connection with the printer."
 msgstr "Impossible de se connecter à l'imprimante ; échec de la mise à jour du firmware."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
 msgctxt "@label"
 msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
 msgstr "Échec de la mise à jour du firmware, car cette fonctionnalité n'est pas prise en charge par la connexion avec l'imprimante."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
 msgctxt "@title:window"
 msgid "Select custom firmware"
 msgstr "Sélectionner le firmware personnalisé"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
 msgctxt "@title:window"
 msgid "Firmware Update"
 msgstr "Mise à jour du firmware"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
 msgctxt "@label"
 msgid "Updating firmware."
 msgstr "Mise à jour du firmware en cours."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
 msgctxt "@label"
 msgid "Firmware update completed."
 msgstr "Mise à jour du firmware terminée."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
 msgctxt "@label"
 msgid "Firmware update failed due to an unknown error."
 msgstr "Échec de la mise à jour du firmware en raison d'une erreur inconnue."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
 msgctxt "@label"
 msgid "Firmware update failed due to an communication error."
 msgstr "Échec de la mise à jour du firmware en raison d'une erreur de communication."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
 msgctxt "@label"
 msgid "Firmware update failed due to an input/output error."
 msgstr "Échec de la mise à jour du firmware en raison d'une erreur d'entrée/de sortie."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
 msgctxt "@label"
 msgid "Firmware update failed due to missing firmware."
 msgstr "Échec de la mise à jour du firmware en raison du firmware manquant."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:19
-msgctxt "@title:window"
-msgid "Convert Image..."
-msgstr "Conversion de l'image..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
+msgctxt "@title"
+msgid "Marketplace"
+msgstr "Marché en ligne"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:33
-msgctxt "@info:tooltip"
-msgid "The maximum distance of each pixel from \"Base.\""
-msgstr "La distance maximale de chaque pixel à partir de la « Base »."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
+msgctxt "@label"
+msgid "You need to accept the license to install the package"
+msgstr "Vous devez accepter la licence pour installer le package"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:38
-msgctxt "@action:label"
-msgid "Height (mm)"
-msgstr "Hauteur (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
+msgctxt "@title"
+msgid "Changes from your account"
+msgstr "Changements à partir de votre compte"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:56
-msgctxt "@info:tooltip"
-msgid "The base height from the build plate in millimeters."
-msgstr "La hauteur de la base à partir du plateau en millimètres."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+msgctxt "@button"
+msgid "Dismiss"
+msgstr "Ignorer"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:61
-msgctxt "@action:label"
-msgid "Base (mm)"
-msgstr "Base (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:182
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
+msgctxt "@button"
+msgid "Next"
+msgstr "Suivant"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:79
-msgctxt "@info:tooltip"
-msgid "The width in millimeters on the build plate."
-msgstr "La largeur en millimètres sur le plateau."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
+msgctxt "@label"
+msgid "The following packages will be added:"
+msgstr "Les packages suivants seront ajoutés :"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:84
-msgctxt "@action:label"
-msgid "Width (mm)"
-msgstr "Largeur (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+msgctxt "@label"
+msgid "The following packages can not be installed because of an incompatible Cura version:"
+msgstr "Les packages suivants ne peuvent pas être installés en raison d'une version incompatible de Cura :"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:103
-msgctxt "@info:tooltip"
-msgid "The depth in millimeters on the build plate"
-msgstr "La profondeur en millimètres sur le plateau"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
+msgctxt "@title:window"
+msgid "Confirm uninstall"
+msgstr "Confirmer la désinstallation"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:108
-msgctxt "@action:label"
-msgid "Depth (mm)"
-msgstr "Profondeur (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
+msgctxt "@text:window"
+msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
+msgstr "Vous désinstallez des matériaux et/ou des profils qui sont encore en cours d'utilisation. La confirmation réinitialisera les matériaux / profils suivants à leurs valeurs par défaut."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:126
-msgctxt "@info:tooltip"
-msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
-msgstr "Pour les lithophanies, les pixels foncés doivent correspondre à des emplacements plus épais afin d'empêcher la lumière de passer. Pour des cartes de hauteur, les pixels clairs signifient un terrain plus élevé, de sorte que les pixels clairs doivent correspondre à des emplacements plus épais dans le modèle 3D généré."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
+msgctxt "@text:window"
+msgid "Materials"
+msgstr "Matériaux"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Darker is higher"
-msgstr "Le plus foncé est plus haut"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
+msgctxt "@text:window"
+msgid "Profiles"
+msgstr "Profils"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Lighter is higher"
-msgstr "Le plus clair est plus haut"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
+msgctxt "@action:button"
+msgid "Confirm"
+msgstr "Confirmer"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:149
-msgctxt "@info:tooltip"
-msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
-msgstr "Pour les lithophanes, un modèle logarithmique simple de la translucidité est disponible. Pour les cartes de hauteur, les valeurs des pixels correspondent aux hauteurs de façon linéaire."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
+msgctxt "@info"
+msgid "Could not connect to the Cura Package database. Please check your connection."
+msgstr "Impossible de se connecter à la base de données Cura Package. Veuillez vérifier votre connexion."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
-msgctxt "@item:inlistbox"
-msgid "Linear"
-msgstr "Linéaire"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+msgctxt "@label"
+msgid "Community Contributions"
+msgstr "Contributions de la communauté"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161 /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:172
-msgctxt "@item:inlistbox"
-msgid "Translucency"
-msgstr "Translucidité"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+msgctxt "@label"
+msgid "Community Plugins"
+msgstr "Plug-ins de la communauté"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:171
-msgctxt "@info:tooltip"
-msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
-msgstr "Le pourcentage de lumière pénétrant une impression avec une épaisseur de 1 millimètre. La diminution de cette valeur augmente le contraste dans les régions sombres et diminue le contraste dans les régions claires de l'image."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+msgctxt "@label"
+msgid "Generic Materials"
+msgstr "Matériaux génériques"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:177
-msgctxt "@action:label"
-msgid "1mm Transmittance (%)"
-msgstr "Transmission 1 mm (%)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
+msgctxt "@label"
+msgid "Version"
+msgstr "Version"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:195
-msgctxt "@info:tooltip"
-msgid "The amount of smoothing to apply to the image."
-msgstr "La quantité de lissage à appliquer à l'image."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
+msgctxt "@label"
+msgid "Last updated"
+msgstr "Dernière mise à jour"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:200
-msgctxt "@action:label"
-msgid "Smoothing"
-msgstr "Lissage"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
+msgctxt "@label"
+msgid "Brand"
+msgstr "Marque"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:227 /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
-msgctxt "@action:button"
-msgid "OK"
-msgstr "OK"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
+msgctxt "@label"
+msgid "Downloads"
+msgstr "Téléchargements"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
 msgctxt "@title:tab"
-msgid "Printer"
-msgstr "Imprimante"
+msgid "Installed plugins"
+msgstr "Plug-ins installés"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
-msgctxt "@title:label"
-msgid "Nozzle Settings"
-msgstr "Paramètres de la buse"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
+msgctxt "@info"
+msgid "No plugin has been installed."
+msgstr "Aucun plug-in n'a été installé."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
-msgctxt "@label"
-msgid "Nozzle size"
-msgstr "Taille de la buse"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:86
+msgctxt "@title:tab"
+msgid "Installed materials"
+msgstr "Matériaux installés"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
-msgctxt "@label"
-msgid "mm"
-msgstr "mm"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:125
+msgctxt "@info"
+msgid "No material has been installed."
+msgstr "Aucun matériau n'a été installé."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
-msgctxt "@label"
-msgid "Compatible material diameter"
-msgstr "Diamètre du matériau compatible"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:139
+msgctxt "@title:tab"
+msgid "Bundled plugins"
+msgstr "Plug-ins groupés"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
-msgctxt "@label"
-msgid "Nozzle offset X"
-msgstr "Décalage buse X"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:184
+msgctxt "@title:tab"
+msgid "Bundled materials"
+msgstr "Matériaux groupés"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
 msgctxt "@label"
-msgid "Nozzle offset Y"
-msgstr "Décalage buse Y"
+msgid "Website"
+msgstr "Site Internet"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
 msgctxt "@label"
-msgid "Cooling Fan Number"
-msgstr "Numéro du ventilateur de refroidissement"
+msgid "Email"
+msgstr "E-mail"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:162
-msgctxt "@title:label"
-msgid "Extruder Start G-code"
-msgstr "Extrudeuse G-Code de démarrage"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
+msgctxt "@description"
+msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
+msgstr "Veuillez vous connecter pour obtenir les plug-ins et matériaux vérifiés pour Ultimaker Cura Enterprise"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:176
-msgctxt "@title:label"
-msgid "Extruder End G-code"
-msgstr "Extrudeuse G-Code de fin"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:199
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:53
+msgctxt "@button"
+msgid "Sign in"
+msgstr "Se connecter"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
-msgctxt "@title:label"
-msgid "Printer Settings"
-msgstr "Paramètres de l'imprimante"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
+msgctxt "@info"
+msgid "Fetching packages..."
+msgstr "Récupération des paquets..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
 msgctxt "@label"
-msgid "X (Width)"
-msgstr "X (Largeur)"
+msgid "Compatibility"
+msgstr "Compatibilité"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
-msgctxt "@label"
-msgid "Y (Depth)"
-msgstr "Y (Profondeur)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
+msgctxt "@label:table_header"
+msgid "Machine"
+msgstr "Machine"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
-msgctxt "@label"
-msgid "Z (Height)"
-msgstr "Z (Hauteur)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
+msgctxt "@label:table_header"
+msgid "Build Plate"
+msgstr "Plateau"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
-msgctxt "@label"
-msgid "Build plate shape"
-msgstr "Forme du plateau"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
+msgctxt "@label:table_header"
+msgid "Support"
+msgstr "Support"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
-msgctxt "@label"
-msgid "Origin at center"
-msgstr "Origine au centre"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
+msgctxt "@label:table_header"
+msgid "Quality"
+msgstr "Qualité"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
-msgctxt "@label"
-msgid "Heated bed"
-msgstr "Plateau chauffant"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
+msgctxt "@action:label"
+msgid "Technical Data Sheet"
+msgstr "Fiche technique"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
-msgctxt "@label"
-msgid "Heated build volume"
-msgstr "Volume de fabrication chauffant"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
+msgctxt "@action:label"
+msgid "Safety Data Sheet"
+msgstr "Fiche de sécurité"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
-msgctxt "@label"
-msgid "G-code flavor"
-msgstr "Parfum G-Code"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
+msgctxt "@action:label"
+msgid "Printing Guidelines"
+msgstr "Directives d'impression"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
-msgctxt "@title:label"
-msgid "Printhead Settings"
-msgstr "Paramètres de la tête d'impression"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
+msgctxt "@action:label"
+msgid "Website"
+msgstr "Site Internet"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
-msgctxt "@label"
-msgid "X min"
-msgstr "X min"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
+msgctxt "@title:tab"
+msgid "Plugins"
+msgstr "Plug-ins"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
-msgctxt "@label"
-msgid "Y min"
-msgstr "Y min"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:457
+msgctxt "@title:tab"
+msgid "Materials"
+msgstr "Matériaux"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
-msgctxt "@label"
-msgid "X max"
-msgstr "X max"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
+msgctxt "@title:tab"
+msgid "Installed"
+msgstr "Installé"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
-msgctxt "@label"
-msgid "Y max"
-msgstr "Y max"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
+msgctxt "@info:tooltip"
+msgid "Go to Web Marketplace"
+msgstr "Aller sur le Marché en ligne"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
 msgctxt "@label"
-msgid "Gantry Height"
-msgstr "Hauteur du portique"
+msgid "Will install upon restarting"
+msgstr "S'installera au redémarrage"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
-msgctxt "@label"
-msgid "Number of Extruders"
-msgstr "Nombre d'extrudeuses"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
+msgctxt "@action:button"
+msgid "Update"
+msgstr "Mise à jour"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:374
-msgctxt "@title:label"
-msgid "Start G-code"
-msgstr "G-Code de démarrage"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
+msgctxt "@action:button"
+msgid "Updating"
+msgstr "Mise à jour"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:385
-msgctxt "@title:label"
-msgid "End G-code"
-msgstr "G-Code de fin"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
+msgctxt "@action:button"
+msgid "Updated"
+msgstr "Mis à jour"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:100
-msgctxt "@info"
-msgid ""
-"Please make sure your printer has a connection:\n"
-"- Check if the printer is turned on.\n"
-"- Check if the printer is connected to the network.\n"
-"- Check if you are signed in to discover cloud-connected printers."
-msgstr ""
-"Assurez-vous que votre imprimante est connectée :\n"
-"- Vérifiez si l'imprimante est sous tension.\n"
-"- Vérifiez si l'imprimante est connectée au réseau.- Vérifiez si vous êtes connecté pour découvrir les imprimantes connectées au cloud."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Log in</a> is required to update"
+msgstr "<a href='%1'>Connexion</a> nécessaire pour effectuer la mise à jour"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+msgctxt "@action:button"
+msgid "Downgrade"
+msgstr "Revenir à une version précédente"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+msgctxt "@action:button"
+msgid "Uninstall"
+msgstr "Désinstaller"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
+msgctxt "@action:button"
+msgid "Installed"
+msgstr "Installé"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Log in</a> is required to install or update"
+msgstr "<a href='%1'>Connexion</a> nécessaire pour l'installation ou la mise à jour"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Buy material spools</a>"
+msgstr "<a href='%1'>Acheter des bobines de matériau</a>"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
+msgctxt "@label"
+msgid "Premium"
+msgstr "Premium"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
+msgctxt "@label"
+msgid "Search materials"
+msgstr "Rechercher des matériaux"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
 msgctxt "@info"
-msgid "Please connect your printer to the network."
-msgstr "Veuillez connecter votre imprimante au réseau."
+msgid "You will need to restart Cura before changes in packages have effect."
+msgstr "Vous devez redémarrer Cura pour que les changements apportés aux paquets ne prennent effet."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:155
-msgctxt "@label link to technical assistance"
-msgid "View user manuals online"
-msgstr "Voir les manuels d'utilisation en ligne"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
+msgctxt "@info:button, %1 is the application name"
+msgid "Quit %1"
+msgstr "Quitter %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
+msgctxt "@action:button"
+msgid "Back"
+msgstr "Précédent"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
+msgctxt "@action:button"
+msgid "Install"
+msgstr "Installer"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
 msgctxt "@label"
 msgid "Mesh Type"
 msgstr "Type de maille"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
 msgctxt "@label"
 msgid "Normal model"
 msgstr "Modèle normal"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
 msgctxt "@label"
 msgid "Print as support"
 msgstr "Imprimer comme support"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
 msgctxt "@label"
 msgid "Modify settings for overlaps"
 msgstr "Modifier les paramètres de chevauchement"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
 msgctxt "@label"
 msgid "Don't support overlaps"
 msgstr "Ne prend pas en charge le chevauchement"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:149
 msgctxt "@item:inlistbox"
 msgid "Infill mesh only"
 msgstr "Maille de remplissage uniquement"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:150
 msgctxt "@item:inlistbox"
 msgid "Cutting mesh"
 msgstr "Maille de coupe"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:380
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:380
 msgctxt "@action:button"
 msgid "Select settings"
 msgstr "Sélectionner les paramètres"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
 msgctxt "@title:window"
 msgid "Select Settings to Customize for this model"
 msgstr "Sélectionner les paramètres pour personnaliser ce modèle"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
 msgctxt "@label:textbox"
 msgid "Filter..."
 msgstr "Filtrer..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
 msgctxt "@label:checkbox"
 msgid "Show all"
 msgstr "Afficher tout"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
 msgctxt "@title:window"
 msgid "Post Processing Plugin"
 msgstr "Plug-in de post-traitement"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
 msgctxt "@label"
 msgid "Post Processing Scripts"
 msgstr "Scripts de post-traitement"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
 msgctxt "@action"
 msgid "Add a script"
 msgstr "Ajouter un script"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
 msgctxt "@label"
 msgid "Settings"
 msgstr "Paramètres"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499
 msgctxt "@info:tooltip"
 msgid "Change active post-processing scripts."
 msgstr "Modifiez les scripts de post-traitement actifs."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503
 msgctxt "@info:tooltip"
 msgid "The following script is active:"
 msgid_plural "The following scripts are active:"
 msgstr[0] "Le script suivant est actif :"
 msgstr[1] "Les scripts suivants sont actifs :"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20 /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
 msgctxt "@label"
-msgid "Color scheme"
-msgstr "Modèle de couleurs"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:107
-msgctxt "@label:listbox"
-msgid "Material Color"
-msgstr "Couleur du matériau"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:111
-msgctxt "@label:listbox"
-msgid "Line Type"
-msgstr "Type de ligne"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:115
-msgctxt "@label:listbox"
-msgid "Speed"
-msgstr "Vitesse"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:119
-msgctxt "@label:listbox"
-msgid "Layer thickness"
-msgstr "Épaisseur de la couche"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:156
-msgctxt "@label"
-msgid "Compatibility Mode"
-msgstr "Mode de compatibilité"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:230
-msgctxt "@label"
-msgid "Travels"
-msgstr "Déplacements"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:236
-msgctxt "@label"
-msgid "Helpers"
-msgstr "Aides"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:242
-msgctxt "@label"
-msgid "Shell"
-msgstr "Coque"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:248 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
-msgctxt "@label"
-msgid "Infill"
-msgstr "Remplissage"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:298
-msgctxt "@label"
-msgid "Only Show Top Layers"
-msgstr "Afficher uniquement les couches supérieures"
+msgid "Queued"
+msgstr "Mis en file d'attente"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:308
-msgctxt "@label"
-msgid "Show 5 Detailed Layers On Top"
-msgstr "Afficher 5 niveaux détaillés en haut"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
+msgctxt "@label link to connect manager"
+msgid "Manage in browser"
+msgstr "Gérer dans le navigateur"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
 msgctxt "@label"
-msgid "Top / Bottom"
-msgstr "Haut / bas"
+msgid "There are no print jobs in the queue. Slice and send a job to add one."
+msgstr "Il n'y a pas de travaux d'impression dans la file d'attente. Découpez et envoyez une tache pour en ajouter une."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:326
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
 msgctxt "@label"
-msgid "Inner Wall"
-msgstr "Paroi interne"
+msgid "Print jobs"
+msgstr "Tâches d'impression"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:384
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
 msgctxt "@label"
-msgid "min"
-msgstr "min."
+msgid "Total print time"
+msgstr "Temps total d'impression"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:433
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
 msgctxt "@label"
-msgid "max"
-msgstr "max."
+msgid "Waiting for"
+msgstr "Attente de"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
 msgctxt "@title:window"
-msgid "More information on anonymous data collection"
-msgstr "Plus d'informations sur la collecte de données anonymes"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
-msgctxt "@text:window"
-msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
-msgstr "Ultimaker Cura recueille des données anonymes afin d'améliorer la qualité d'impression et l'expérience utilisateur. Voici un exemple de toutes les données partagées :"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
-msgctxt "@text:window"
-msgid "I don't want to send anonymous data"
-msgstr "Je ne veux pas envoyer de données anonymes"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
-msgctxt "@text:window"
-msgid "Allow sending anonymous data"
-msgstr "Autoriser l'envoi de données anonymes"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
-msgctxt "@action:button"
-msgid "Back"
-msgstr "Précédent"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
-msgctxt "@label"
-msgid "Compatibility"
-msgstr "Compatibilité"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
-msgctxt "@label:table_header"
-msgid "Machine"
-msgstr "Machine"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
-msgctxt "@label:table_header"
-msgid "Build Plate"
-msgstr "Plateau"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
-msgctxt "@label:table_header"
-msgid "Support"
-msgstr "Support"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
-msgctxt "@label:table_header"
-msgid "Quality"
-msgstr "Qualité"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
-msgctxt "@action:label"
-msgid "Technical Data Sheet"
-msgstr "Fiche technique"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
-msgctxt "@action:label"
-msgid "Safety Data Sheet"
-msgstr "Fiche de sécurité"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
-msgctxt "@action:label"
-msgid "Printing Guidelines"
-msgstr "Directives d'impression"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
-msgctxt "@action:label"
-msgid "Website"
-msgstr "Site Internet"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
-msgctxt "@action:button"
-msgid "Installed"
-msgstr "Installé"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to install or update"
-msgstr "<a href='%1'>Connexion</a> nécessaire pour l'installation ou la mise à jour"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Buy material spools</a>"
-msgstr "<a href='%1'>Acheter des bobines de matériau</a>"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
-msgctxt "@action:button"
-msgid "Update"
-msgstr "Mise à jour"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
-msgctxt "@action:button"
-msgid "Updating"
-msgstr "Mise à jour"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
-msgctxt "@action:button"
-msgid "Updated"
-msgstr "Mis à jour"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
-msgctxt "@label"
-msgid "Premium"
-msgstr "Premium"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
-msgctxt "@info:tooltip"
-msgid "Go to Web Marketplace"
-msgstr "Aller sur le Marché en ligne"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
-msgctxt "@label"
-msgid "Search materials"
-msgstr "Rechercher des matériaux"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
-msgctxt "@info"
-msgid "You will need to restart Cura before changes in packages have effect."
-msgstr "Vous devez redémarrer Cura pour que les changements apportés aux paquets ne prennent effet."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
-msgctxt "@info:button, %1 is the application name"
-msgid "Quit %1"
-msgstr "Quitter %1"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
-msgctxt "@title:tab"
-msgid "Plugins"
-msgstr "Plug-ins"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44 /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:466 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
-msgctxt "@title:tab"
-msgid "Materials"
-msgstr "Matériaux"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
-msgctxt "@title:tab"
-msgid "Installed"
-msgstr "Installé"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
-msgctxt "@label"
-msgid "Will install upon restarting"
-msgstr "S'installera au redémarrage"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to update"
-msgstr "<a href='%1'>Connexion</a> nécessaire pour effectuer la mise à jour"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Downgrade"
-msgstr "Revenir à une version précédente"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Uninstall"
-msgstr "Désinstaller"
+msgid "Configuration Changes"
+msgstr "Modifications de configuration"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
 msgctxt "@action:button"
-msgid "Install"
-msgstr "Installer"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
-msgctxt "@title"
-msgid "Changes from your account"
-msgstr "Changements à partir de votre compte"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-msgctxt "@button"
-msgid "Dismiss"
-msgstr "Ignorer"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
-msgctxt "@button"
-msgid "Next"
-msgstr "Suivant"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
-msgctxt "@label"
-msgid "The following packages will be added:"
-msgstr "Les packages suivants seront ajoutés :"
+msgid "Override"
+msgstr "Remplacer"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
 msgctxt "@label"
-msgid "The following packages can not be installed because of an incompatible Cura version:"
-msgstr "Les packages suivants ne peuvent pas être installés en raison d'une version incompatible de Cura :"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
-msgctxt "@title:window"
-msgid "Confirm uninstall"
-msgstr "Confirmer la désinstallation"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
-msgctxt "@text:window"
-msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
-msgstr "Vous désinstallez des matériaux et/ou des profils qui sont encore en cours d'utilisation. La confirmation réinitialisera les matériaux / profils suivants à leurs valeurs par défaut."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
-msgctxt "@text:window"
-msgid "Materials"
-msgstr "Matériaux"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
-msgctxt "@text:window"
-msgid "Profiles"
-msgstr "Profils"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
-msgctxt "@action:button"
-msgid "Confirm"
-msgstr "Confirmer"
+msgid "The assigned printer, %1, requires the following configuration change:"
+msgid_plural "The assigned printer, %1, requires the following configuration changes:"
+msgstr[0] "L'imprimante assignée, %1, nécessite la modification de configuration suivante :"
+msgstr[1] "L'imprimante assignée, %1, nécessite les modifications de configuration suivantes :"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
 msgctxt "@label"
-msgid "You need to accept the license to install the package"
-msgstr "Vous devez accepter la licence pour installer le package"
+msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
+msgstr "L'imprimante %1 est assignée, mais le projet contient une configuration matérielle inconnue."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
 msgctxt "@label"
-msgid "Website"
-msgstr "Site Internet"
+msgid "Change material %1 from %2 to %3."
+msgstr "Changer le matériau %1 de %2 à %3."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
 msgctxt "@label"
-msgid "Email"
-msgstr "E-mail"
+msgid "Load %3 as material %1 (This cannot be overridden)."
+msgstr "Charger %3 comme matériau %1 (Ceci ne peut pas être remplacé)."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
 msgctxt "@label"
-msgid "Version"
-msgstr "Version"
+msgid "Change print core %1 from %2 to %3."
+msgstr "Changer le print core %1 de %2 à %3."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
 msgctxt "@label"
-msgid "Last updated"
-msgstr "Dernière mise à jour"
+msgid "Change build plate to %1 (This cannot be overridden)."
+msgstr "Changer le plateau en %1 (Ceci ne peut pas être remplacé)."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
 msgctxt "@label"
-msgid "Brand"
-msgstr "Marque"
+msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
+msgstr "Si vous sélectionnez « Remplacer », les paramètres de la configuration actuelle de l'imprimante seront utilisés. Cela peut entraîner l'échec de l'impression."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
 msgctxt "@label"
-msgid "Downloads"
-msgstr "Téléchargements"
+msgid "Glass"
+msgstr "Verre"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
 msgctxt "@label"
-msgid "Community Contributions"
-msgstr "Contributions de la communauté"
+msgid "Aluminum"
+msgstr "Aluminium"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
 msgctxt "@label"
-msgid "Community Plugins"
-msgstr "Plug-ins de la communauté"
+msgid "Unavailable printer"
+msgstr "Imprimante indisponible"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
 msgctxt "@label"
-msgid "Generic Materials"
-msgstr "Matériaux génériques"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
-msgctxt "@info"
-msgid "Could not connect to the Cura Package database. Please check your connection."
-msgstr "Impossible de se connecter à la base de données Cura Package. Veuillez vérifier votre connexion."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
-msgctxt "@title:tab"
-msgid "Installed plugins"
-msgstr "Plug-ins installés"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
-msgctxt "@info"
-msgid "No plugin has been installed."
-msgstr "Aucun plug-in n'a été installé."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:86
-msgctxt "@title:tab"
-msgid "Installed materials"
-msgstr "Matériaux installés"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:125
-msgctxt "@info"
-msgid "No material has been installed."
-msgstr "Aucun matériau n'a été installé."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:139
-msgctxt "@title:tab"
-msgid "Bundled plugins"
-msgstr "Plug-ins groupés"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:184
-msgctxt "@title:tab"
-msgid "Bundled materials"
-msgstr "Matériaux groupés"
+msgid "First available"
+msgstr "Premier disponible"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:523
 msgctxt "@info"
-msgid "Fetching packages..."
-msgstr "Récupération des paquets..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
-msgctxt "@description"
-msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
-msgstr "Veuillez vous connecter pour obtenir les plug-ins et matériaux vérifiés pour Ultimaker Cura Enterprise"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
-msgctxt "@title"
-msgid "Marketplace"
-msgstr "Marché en ligne"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
-msgctxt "@title"
-msgid "Build Plate Leveling"
-msgstr "Nivellement du plateau"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
-msgctxt "@label"
-msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
-msgstr "Pour obtenir des résultats d'impression optimaux, vous pouvez maintenant régler votre plateau. Quand vous cliquez sur 'Aller à la position suivante', la buse se déplacera vers les différentes positions pouvant être réglées."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
-msgctxt "@label"
-msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
-msgstr "Pour chacune des positions ; glissez un bout de papier sous la buse et ajustez la hauteur du plateau. La hauteur du plateau est juste lorsque la pointe de la buse gratte légèrement le papier."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
-msgctxt "@action:button"
-msgid "Start Build Plate Leveling"
-msgstr "Démarrer le nivellement du plateau"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
-msgctxt "@action:button"
-msgid "Move to Next Position"
-msgstr "Aller à la position suivante"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
-msgctxt "@label"
-msgid "Please select any upgrades made to this Ultimaker Original"
-msgstr "Sélectionnez les mises à niveau disponibles pour cet Ultimaker Original"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
-msgctxt "@label"
-msgid "Heated Build Plate (official kit or self-built)"
-msgstr "Plateau chauffant (kit officiel ou fabriqué soi-même)"
+msgid "Please update your printer's firmware to manage the queue remotely."
+msgstr "Veuillez mettre à jour le Firmware de votre imprimante pour gérer la file d'attente à distance."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
 msgctxt "@title:window"
 msgid "Connect to Networked Printer"
 msgstr "Connecter à l'imprimante en réseau"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
 msgctxt "@label"
 msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
 msgstr "Pour imprimer directement sur votre imprimante via le réseau, assurez-vous que votre imprimante est connectée au réseau via un câble Ethernet ou en connectant votre imprimante à votre réseau Wi-Fi. Si vous ne connectez pas Cura avec votre imprimante, vous pouvez utiliser une clé USB pour transférer les fichiers g-code sur votre imprimante."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
 msgctxt "@label"
 msgid "Select your printer from the list below:"
 msgstr "Sélectionnez votre imprimante dans la liste ci-dessous :"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
 msgctxt "@action:button"
 msgid "Edit"
 msgstr "Modifier"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:55 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:138
 msgctxt "@action:button"
 msgid "Remove"
 msgstr "Supprimer"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
 msgctxt "@action:button"
 msgid "Refresh"
 msgstr "Rafraîchir"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
 msgctxt "@label"
 msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
 msgstr "Si votre imprimante n'apparaît pas dans la liste, lisez le <a href='%1'>guide de dépannage de l'impression en réseau</a>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
 msgctxt "@label"
 msgid "Type"
 msgstr "Type"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
 msgctxt "@label"
 msgid "Firmware version"
 msgstr "Version du firmware"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
 msgctxt "@label"
 msgid "Address"
 msgstr "Adresse"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
 msgctxt "@label"
 msgid "This printer is not set up to host a group of printers."
 msgstr "Cette imprimante n'est pas configurée pour héberger un groupe d'imprimantes."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
 msgctxt "@label"
 msgid "This printer is the host for a group of %1 printers."
 msgstr "Cette imprimante est l'hôte d'un groupe d'imprimantes %1."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
 msgctxt "@label"
 msgid "The printer at this address has not yet responded."
 msgstr "L'imprimante à cette adresse n'a pas encore répondu."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
 msgctxt "@action:button"
 msgid "Connect"
 msgstr "Connecter"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
 msgctxt "@title:window"
 msgid "Invalid IP address"
 msgstr "Adresse IP non valide"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
 msgctxt "@text"
 msgid "Please enter a valid IP address."
 msgstr "Veuillez saisir une adresse IP valide."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
 msgctxt "@title:window"
 msgid "Printer Address"
 msgstr "Adresse de l'imprimante"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
 msgctxt "@label"
 msgid "Enter the IP address of your printer on the network."
 msgstr "Saisissez l'adresse IP de votre imprimante sur le réseau."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
-msgctxt "@title:window"
-msgid "Configuration Changes"
-msgstr "Modifications de configuration"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:227
 msgctxt "@action:button"
-msgid "Override"
-msgstr "Remplacer"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
-msgctxt "@label"
-msgid "The assigned printer, %1, requires the following configuration change:"
-msgid_plural "The assigned printer, %1, requires the following configuration changes:"
-msgstr[0] "L'imprimante assignée, %1, nécessite la modification de configuration suivante :"
-msgstr[1] "L'imprimante assignée, %1, nécessite les modifications de configuration suivantes :"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
-msgctxt "@label"
-msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
-msgstr "L'imprimante %1 est assignée, mais le projet contient une configuration matérielle inconnue."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
-msgctxt "@label"
-msgid "Change material %1 from %2 to %3."
-msgstr "Changer le matériau %1 de %2 à %3."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
-msgctxt "@label"
-msgid "Load %3 as material %1 (This cannot be overridden)."
-msgstr "Charger %3 comme matériau %1 (Ceci ne peut pas être remplacé)."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
-msgctxt "@label"
-msgid "Change print core %1 from %2 to %3."
-msgstr "Changer le print core %1 de %2 à %3."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
-msgctxt "@label"
-msgid "Change build plate to %1 (This cannot be overridden)."
-msgstr "Changer le plateau en %1 (Ceci ne peut pas être remplacé)."
+msgid "OK"
+msgstr "OK"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
-msgctxt "@label"
-msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
-msgstr "Si vous sélectionnez « Remplacer », les paramètres de la configuration actuelle de l'imprimante seront utilisés. Cela peut entraîner l'échec de l'impression."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
+msgctxt "@title:window"
+msgid "Print over network"
+msgstr "Imprimer sur le réseau"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
-msgctxt "@label"
-msgid "Glass"
-msgstr "Verre"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
+msgctxt "@action:button"
+msgid "Print"
+msgstr "Imprimer"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
 msgctxt "@label"
-msgid "Aluminum"
-msgstr "Aluminium"
+msgid "Printer selection"
+msgstr "Sélection d'imprimantes"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
 msgctxt "@label"
 msgid "Move to top"
 msgstr "Déplacer l'impression en haut"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
 msgctxt "@label"
 msgid "Delete"
 msgstr "Effacer"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:289
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:290
 msgctxt "@label"
 msgid "Resume"
 msgstr "Reprendre"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
 msgctxt "@label"
 msgid "Pausing..."
 msgstr "Mise en pause..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
 msgctxt "@label"
 msgid "Resuming..."
 msgstr "Reprise..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:284 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:293
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:285
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:294
 msgctxt "@label"
 msgid "Pause"
 msgstr "Pause"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Aborting..."
 msgstr "Abandon..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Abort"
 msgstr "Abandonner"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to move %1 to the top of the queue?"
 msgstr "Êtes-vous sûr de vouloir déplacer %1 en haut de la file d'attente ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
 msgctxt "@window:title"
 msgid "Move print job to top"
 msgstr "Déplacer l'impression en haut de la file d'attente"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to delete %1?"
 msgstr "Êtes-vous sûr de vouloir supprimer %1 ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
 msgctxt "@window:title"
 msgid "Delete print job"
 msgstr "Supprimer l'impression"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to abort %1?"
 msgstr "Êtes-vous sûr de vouloir annuler %1 ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:335
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:336
 msgctxt "@window:title"
 msgid "Abort print"
 msgstr "Abandonner l'impression"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
+msgctxt "@label:status"
+msgid "Aborted"
+msgstr "Abandonné"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
+msgctxt "@label:status"
+msgid "Finished"
+msgstr "Terminé"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:364
+msgctxt "@label:status"
+msgid "Preparing..."
+msgstr "Préparation..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
+msgctxt "@label:status"
+msgid "Aborting..."
+msgstr "Abandon..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
+msgctxt "@label:status"
+msgid "Pausing..."
+msgstr "Mise en pause..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
+msgctxt "@label:status"
+msgid "Paused"
+msgstr "En pause"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
+msgctxt "@label:status"
+msgid "Resuming..."
+msgstr "Reprise..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
+msgctxt "@label:status"
+msgid "Action required"
+msgstr "Action requise"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
+msgctxt "@label:status"
+msgid "Finishes %1 at %2"
+msgstr "Finit %1 à %2"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
 msgctxt "@label link to Connect and Cloud interfaces"
 msgid "Manage printer"
 msgstr "Gérer l'imprimante"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:519 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
-msgctxt "@info"
-msgid "Please update your printer's firmware to manage the queue remotely."
-msgstr "Veuillez mettre à jour le Firmware de votre imprimante pour gérer la file d'attente à distance."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
 msgctxt "@label:status"
 msgid "Loading..."
 msgstr "Chargement..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
 msgctxt "@label:status"
 msgid "Unavailable"
 msgstr "Indisponible"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
 msgctxt "@label:status"
 msgid "Unreachable"
 msgstr "Injoignable"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
 msgctxt "@label:status"
 msgid "Idle"
 msgstr "Inactif"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:365
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:369
 msgctxt "@label:status"
 msgid "Printing"
 msgstr "Impression"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:406
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:410
 msgctxt "@label"
 msgid "Untitled"
 msgstr "Sans titre"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:427
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:431
 msgctxt "@label"
 msgid "Anonymous"
 msgstr "Anonyme"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:454
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:458
 msgctxt "@label:status"
 msgid "Requires configuration changes"
 msgstr "Nécessite des modifications de configuration"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:492
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:496
 msgctxt "@action:button"
 msgid "Details"
 msgstr "Détails"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
 msgctxt "@label"
-msgid "Unavailable printer"
-msgstr "Imprimante indisponible"
+msgid "Please select any upgrades made to this Ultimaker Original"
+msgstr "Sélectionnez les mises à niveau disponibles pour cet Ultimaker Original"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
 msgctxt "@label"
-msgid "First available"
-msgstr "Premier disponible"
+msgid "Heated Build Plate (official kit or self-built)"
+msgstr "Plateau chauffant (kit officiel ou fabriqué soi-même)"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
-msgctxt "@label:status"
-msgid "Aborted"
-msgstr "Abandonné"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
+msgctxt "@title"
+msgid "Build Plate Leveling"
+msgstr "Nivellement du plateau"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
-msgctxt "@label:status"
-msgid "Finished"
-msgstr "Terminé"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
+msgctxt "@label"
+msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
+msgstr "Pour obtenir des résultats d'impression optimaux, vous pouvez maintenant régler votre plateau. Quand vous cliquez sur 'Aller à la position suivante', la buse se déplacera vers les différentes positions pouvant être réglées."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
-msgctxt "@label:status"
-msgid "Preparing..."
-msgstr "Préparation..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
+msgctxt "@label"
+msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
+msgstr "Pour chacune des positions ; glissez un bout de papier sous la buse et ajustez la hauteur du plateau. La hauteur du plateau est juste lorsque la pointe de la buse gratte légèrement le papier."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
-msgctxt "@label:status"
-msgid "Aborting..."
-msgstr "Abandon..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
+msgctxt "@action:button"
+msgid "Start Build Plate Leveling"
+msgstr "Démarrer le nivellement du plateau"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
-msgctxt "@label:status"
-msgid "Pausing..."
-msgstr "Mise en pause..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
+msgctxt "@action:button"
+msgid "Move to Next Position"
+msgstr "Aller à la position suivante"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
-msgctxt "@label:status"
-msgid "Paused"
-msgstr "En pause"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
+msgctxt "@title:window"
+msgid "Open Project"
+msgstr "Ouvrir un projet"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
-msgctxt "@label:status"
-msgid "Resuming..."
-msgstr "Reprise..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
+msgctxt "@action:ComboBox Update/override existing profile"
+msgid "Update existing"
+msgstr "Mettre à jour l'existant"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
-msgctxt "@label:status"
-msgid "Action required"
-msgstr "Action requise"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:63
+msgctxt "@action:ComboBox Save settings in a new profile"
+msgid "Create new"
+msgstr "Créer"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
-msgctxt "@label:status"
-msgid "Finishes %1 at %2"
-msgstr "Finit %1 à %2"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:75
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
+msgctxt "@action:title"
+msgid "Summary - Cura Project"
+msgstr "Résumé - Projet Cura"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:97
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
+msgctxt "@action:label"
+msgid "Printer settings"
+msgstr "Paramètres de l'imprimante"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:113
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the machine be resolved?"
+msgstr "Comment le conflit de la machine doit-il être résolu ?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
+msgctxt "@action:label"
+msgid "Type"
+msgstr "Type"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:183
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
+msgctxt "@action:label"
+msgid "Printer Group"
+msgstr "Groupe d'imprimantes"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
+msgctxt "@action:label"
+msgid "Profile settings"
+msgstr "Paramètres de profil"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:221
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the profile be resolved?"
+msgstr "Comment le conflit du profil doit-il être résolu ?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:353
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242
+msgctxt "@action:label"
+msgid "Name"
+msgstr "Nom"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:258
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
+msgctxt "@action:label"
+msgid "Intent"
+msgstr "Intent"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:274
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
+msgctxt "@action:label"
+msgid "Not in profile"
+msgstr "Absent du profil"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
+msgctxt "@action:label"
+msgid "%1 override"
+msgid_plural "%1 overrides"
+msgstr[0] "%1 écrasent"
+msgstr[1] "%1 écrase"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:290
+msgctxt "@action:label"
+msgid "Derivative from"
+msgstr "Dérivé de"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:295
+msgctxt "@action:label"
+msgid "%1, %2 override"
+msgid_plural "%1, %2 overrides"
+msgstr[0] "%1, %2 écrasent"
+msgstr[1] "%1, %2 écrase"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:312
+msgctxt "@action:label"
+msgid "Material settings"
+msgstr "Paramètres du matériau"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:328
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the material be resolved?"
+msgstr "Comment le conflit du matériau doit-il être résolu ?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:373
+msgctxt "@action:label"
+msgid "Setting visibility"
+msgstr "Visibilité des paramètres"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:382
+msgctxt "@action:label"
+msgid "Mode"
+msgstr "Mode"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:398
+msgctxt "@action:label"
+msgid "Visible settings:"
+msgstr "Paramètres visibles :"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:403
+msgctxt "@action:label"
+msgid "%1 out of %2"
+msgstr "%1 sur %2"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:429
+msgctxt "@action:warning"
+msgid "Loading a project will clear all models on the build plate."
+msgstr "Le chargement d'un projet effacera tous les modèles sur le plateau."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:457
+msgctxt "@action:button"
+msgid "Open"
+msgstr "Ouvrir"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.qml:22
+msgctxt "@info:tooltip"
+msgid "Some things could be problematic in this print. Click to see tips for adjustment."
+msgstr "Certains éléments pourraient causer des problèmes à cette impression. Cliquez pour voir les conseils d'ajustement."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:100
+msgctxt "@info"
+msgid ""
+"Please make sure your printer has a connection:\n"
+"- Check if the printer is turned on.\n"
+"- Check if the printer is connected to the network.\n"
+"- Check if you are signed in to discover cloud-connected printers."
+msgstr ""
+"Assurez-vous que votre imprimante est connectée :\n"
+"- Vérifiez si l'imprimante est sous tension.\n"
+"- Vérifiez si l'imprimante est connectée au réseau.- Vérifiez si vous êtes connecté pour découvrir les imprimantes connectées au cloud."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:117
+msgctxt "@info"
+msgid "Please connect your printer to the network."
+msgstr "Veuillez connecter votre imprimante au réseau."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:155
+msgctxt "@label link to technical assistance"
+msgid "View user manuals online"
+msgstr "Voir les manuels d'utilisation en ligne"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+msgctxt "@title:window"
+msgid "More information on anonymous data collection"
+msgstr "Plus d'informations sur la collecte de données anonymes"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
+msgctxt "@text:window"
+msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
+msgstr "Ultimaker Cura recueille des données anonymes afin d'améliorer la qualité d'impression et l'expérience utilisateur. Voici un exemple de toutes les données partagées :"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
+msgctxt "@text:window"
+msgid "I don't want to send anonymous data"
+msgstr "Je ne veux pas envoyer de données anonymes"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
+msgctxt "@text:window"
+msgid "Allow sending anonymous data"
+msgstr "Autoriser l'envoi de données anonymes"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
 msgctxt "@label"
-msgid "Queued"
-msgstr "Mis en file d'attente"
+msgid "Color scheme"
+msgstr "Modèle de couleurs"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
-msgctxt "@label link to connect manager"
-msgid "Manage in browser"
-msgstr "Gérer dans le navigateur"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:109
+msgctxt "@label:listbox"
+msgid "Material Color"
+msgstr "Couleur du matériau"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:113
+msgctxt "@label:listbox"
+msgid "Line Type"
+msgstr "Type de ligne"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:117
+msgctxt "@label:listbox"
+msgid "Speed"
+msgstr "Vitesse"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:121
+msgctxt "@label:listbox"
+msgid "Layer Thickness"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:125
+msgctxt "@label:listbox"
+msgid "Line Width"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:163
 msgctxt "@label"
-msgid "There are no print jobs in the queue. Slice and send a job to add one."
-msgstr "Il n'y a pas de travaux d'impression dans la file d'attente. Découpez et envoyez une tache pour en ajouter une."
+msgid "Compatibility Mode"
+msgstr "Mode de compatibilité"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:237
 msgctxt "@label"
-msgid "Print jobs"
-msgstr "Tâches d'impression"
+msgid "Travels"
+msgstr "Déplacements"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:243
 msgctxt "@label"
-msgid "Total print time"
-msgstr "Temps total d'impression"
+msgid "Helpers"
+msgstr "Aides"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:249
 msgctxt "@label"
-msgid "Waiting for"
-msgstr "Attente de"
+msgid "Shell"
+msgstr "Coque"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
-msgctxt "@title:window"
-msgid "Print over network"
-msgstr "Imprimer sur le réseau"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:255
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
+msgctxt "@label"
+msgid "Infill"
+msgstr "Remplissage"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
-msgctxt "@action:button"
-msgid "Print"
-msgstr "Imprimer"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:263
+msgctxt "@label"
+msgid "Starts"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:314
 msgctxt "@label"
-msgid "Printer selection"
-msgstr "Sélection d'imprimantes"
+msgid "Only Show Top Layers"
+msgstr "Afficher uniquement les couches supérieures"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/AccountWidget.qml:24
-msgctxt "@action:button"
-msgid "Sign in"
-msgstr "Se connecter"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:324
+msgctxt "@label"
+msgid "Show 5 Detailed Layers On Top"
+msgstr "Afficher 5 niveaux détaillés en haut"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:40
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:338
 msgctxt "@label"
-msgid "Your key to connected 3D printing"
-msgstr "Votre clé pour une impression 3D connectée"
+msgid "Top / Bottom"
+msgstr "Haut / bas"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:51
-msgctxt "@text"
-msgid ""
-"- Customize your experience with more print profiles and plugins\n"
-"- Stay flexible by syncing your setup and loading it anywhere\n"
-"- Increase efficiency with a remote workflow on Ultimaker printers"
-msgstr ""
-"- Personnalisez votre expérience avec plus de profils d'impression et de plug-ins\n"
-"- Restez flexible en synchronisant votre configuration et en la chargeant n'importe où\n"
-"- Augmentez l'efficacité grâce à un flux de travail à distance sur les imprimantes Ultimaker"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:342
+msgctxt "@label"
+msgid "Inner Wall"
+msgstr "Paroi interne"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:78 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:142
-msgctxt "@button"
-msgid "Create account"
-msgstr "Créer un compte"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:405
+msgctxt "@label"
+msgid "min"
+msgstr "min."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:28
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:464
 msgctxt "@label"
-msgid "Checking..."
-msgstr "Vérification en cours..."
+msgid "max"
+msgstr "max."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
+msgctxt "@title:label"
+msgid "Nozzle Settings"
+msgstr "Paramètres de la buse"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
 msgctxt "@label"
-msgid "Account synced"
-msgstr "Compte synchronisé"
+msgid "Nozzle size"
+msgstr "Taille de la buse"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
 msgctxt "@label"
-msgid "Something went wrong..."
-msgstr "Un problème s'est produit..."
+msgid "mm"
+msgstr "mm"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:96
-msgctxt "@button"
-msgid "Install pending updates"
-msgstr "Installer les mises à jour en attente"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
+msgctxt "@label"
+msgid "Compatible material diameter"
+msgstr "Diamètre du matériau compatible"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:118
-msgctxt "@button"
-msgid "Check for account updates"
-msgstr "Rechercher des mises à jour de compte"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
+msgctxt "@label"
+msgid "Nozzle offset X"
+msgstr "Décalage buse X"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:81
-msgctxt "@label The argument is a timestamp"
-msgid "Last update: %1"
-msgstr "Dernière mise à jour : %1"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
+msgctxt "@label"
+msgid "Nozzle offset Y"
+msgstr "Décalage buse Y"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:109
-msgctxt "@button"
-msgid "Ultimaker Account"
-msgstr "Compte Ultimaker"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
+msgctxt "@label"
+msgid "Cooling Fan Number"
+msgstr "Numéro du ventilateur de refroidissement"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:125
-msgctxt "@button"
-msgid "Sign Out"
-msgstr "Déconnexion"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
+msgctxt "@title:label"
+msgid "Extruder Start G-code"
+msgstr "Extrudeuse G-Code de démarrage"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
+msgctxt "@title:label"
+msgid "Extruder End G-code"
+msgstr "Extrudeuse G-Code de fin"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+msgctxt "@title:tab"
+msgid "Printer"
+msgstr "Imprimante"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
+msgctxt "@title:label"
+msgid "Printer Settings"
+msgstr "Paramètres de l'imprimante"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
 msgctxt "@label"
-msgid "No time estimation available"
-msgstr "Aucune estimation de la durée n'est disponible"
+msgid "X (Width)"
+msgstr "X (Largeur)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
 msgctxt "@label"
-msgid "No cost estimation available"
-msgstr "Aucune estimation des coûts n'est disponible"
+msgid "Y (Depth)"
+msgstr "Y (Profondeur)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
-msgctxt "@button"
-msgid "Preview"
-msgstr "Aperçu"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
+msgctxt "@label"
+msgid "Z (Height)"
+msgstr "Z (Hauteur)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
 msgctxt "@label"
-msgid "Time estimation"
-msgstr "Estimation de durée"
+msgid "Build plate shape"
+msgstr "Forme du plateau"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
 msgctxt "@label"
-msgid "Material estimation"
-msgstr "Estimation du matériau"
+msgid "Origin at center"
+msgstr "Origine au centre"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
-msgctxt "@label m for meter"
-msgid "%1m"
-msgstr "%1m"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
+msgctxt "@label"
+msgid "Heated bed"
+msgstr "Plateau chauffant"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
-msgctxt "@label g for grams"
-msgid "%1g"
-msgstr "%1g"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
+msgctxt "@label"
+msgid "Heated build volume"
+msgstr "Volume de fabrication chauffant"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
-msgctxt "@label:PrintjobStatus"
-msgid "Slicing..."
-msgstr "Découpe en cours..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
+msgctxt "@label"
+msgid "G-code flavor"
+msgstr "Parfum G-Code"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
-msgctxt "@label:PrintjobStatus"
-msgid "Unable to slice"
-msgstr "Impossible de découper"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
+msgctxt "@title:label"
+msgid "Printhead Settings"
+msgstr "Paramètres de la tête d'impression"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
+msgctxt "@label"
+msgid "X min"
+msgstr "X min"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
+msgctxt "@label"
+msgid "Y min"
+msgstr "Y min"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+msgctxt "@label"
+msgid "X max"
+msgstr "X max"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+msgctxt "@label"
+msgid "Y max"
+msgstr "Y max"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+msgctxt "@label"
+msgid "Gantry Height"
+msgstr "Hauteur du portique"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+msgctxt "@label"
+msgid "Number of Extruders"
+msgstr "Nombre d'extrudeuses"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
+msgctxt "@label"
+msgid "Apply Extruder offsets to GCode"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
+msgctxt "@title:label"
+msgid "Start G-code"
+msgstr "G-Code de démarrage"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
+msgctxt "@title:label"
+msgid "End G-code"
+msgstr "G-Code de fin"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:19
+msgctxt "@title:window"
+msgid "Convert Image..."
+msgstr "Conversion de l'image..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:33
+msgctxt "@info:tooltip"
+msgid "The maximum distance of each pixel from \"Base.\""
+msgstr "La distance maximale de chaque pixel à partir de la « Base »."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:38
+msgctxt "@action:label"
+msgid "Height (mm)"
+msgstr "Hauteur (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:56
+msgctxt "@info:tooltip"
+msgid "The base height from the build plate in millimeters."
+msgstr "La hauteur de la base à partir du plateau en millimètres."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:61
+msgctxt "@action:label"
+msgid "Base (mm)"
+msgstr "Base (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:79
+msgctxt "@info:tooltip"
+msgid "The width in millimeters on the build plate."
+msgstr "La largeur en millimètres sur le plateau."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:84
+msgctxt "@action:label"
+msgid "Width (mm)"
+msgstr "Largeur (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:103
+msgctxt "@info:tooltip"
+msgid "The depth in millimeters on the build plate"
+msgstr "La profondeur en millimètres sur le plateau"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:108
+msgctxt "@action:label"
+msgid "Depth (mm)"
+msgstr "Profondeur (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:126
+msgctxt "@info:tooltip"
+msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
+msgstr "Pour les lithophanies, les pixels foncés doivent correspondre à des emplacements plus épais afin d'empêcher la lumière de passer. Pour des cartes de hauteur, les pixels clairs signifient un terrain plus élevé, de sorte que les pixels clairs doivent correspondre à des emplacements plus épais dans le modèle 3D généré."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:139
+msgctxt "@item:inlistbox"
+msgid "Darker is higher"
+msgstr "Le plus foncé est plus haut"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:139
+msgctxt "@item:inlistbox"
+msgid "Lighter is higher"
+msgstr "Le plus clair est plus haut"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:149
+msgctxt "@info:tooltip"
+msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
+msgstr "Pour les lithophanes, un modèle logarithmique simple de la translucidité est disponible. Pour les cartes de hauteur, les valeurs des pixels correspondent aux hauteurs de façon linéaire."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:161
+msgctxt "@item:inlistbox"
+msgid "Linear"
+msgstr "Linéaire"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:161
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:172
+msgctxt "@item:inlistbox"
+msgid "Translucency"
+msgstr "Translucidité"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:171
+msgctxt "@info:tooltip"
+msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
+msgstr "Le pourcentage de lumière pénétrant une impression avec une épaisseur de 1 millimètre. La diminution de cette valeur augmente le contraste dans les régions sombres et diminue le contraste dans les régions claires de l'image."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:177
+msgctxt "@action:label"
+msgid "1mm Transmittance (%)"
+msgstr "Transmission 1 mm (%)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:195
+msgctxt "@info:tooltip"
+msgid "The amount of smoothing to apply to the image."
+msgstr "La quantité de lissage à appliquer à l'image."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:200
+msgctxt "@action:label"
+msgid "Smoothing"
+msgstr "Lissage"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
+msgctxt "@title"
+msgid "My Backups"
+msgstr "Mes sauvegardes"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
+msgctxt "@empty_state"
+msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
+msgstr "Vous n'avez actuellement aucune sauvegarde. Utilisez le bouton « Sauvegarder maintenant » pour en créer une."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
+msgctxt "@backup_limit_info"
+msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
+msgstr "Pendant la phase de prévisualisation, vous ne pourrez voir qu'un maximum de 5 sauvegardes. Supprimez une sauvegarde pour voir les plus anciennes."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
+msgctxt "@description"
+msgid "Backup and synchronize your Cura settings."
+msgstr "Sauvegardez et synchronisez vos paramètres Cura."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
 msgctxt "@button"
-msgid "Processing"
-msgstr "Traitement"
+msgid "Want more?"
+msgstr "Vous en voulez plus ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
 msgctxt "@button"
-msgid "Slice"
-msgstr "Découper"
+msgid "Backup Now"
+msgstr "Sauvegarder maintenant"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
-msgctxt "@label"
-msgid "Start the slicing process"
-msgstr "Démarrer le processus de découpe"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
+msgctxt "@checkbox:description"
+msgid "Auto Backup"
+msgstr "Sauvegarde automatique"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
+msgctxt "@checkbox:description"
+msgid "Automatically create a backup each day that Cura is started."
+msgstr "Créez automatiquement une sauvegarde chaque jour où Cura est démarré."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
+msgctxt "@backuplist:label"
+msgid "Cura Version"
+msgstr "Version Cura"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
+msgctxt "@backuplist:label"
+msgid "Machines"
+msgstr "Machines"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
+msgctxt "@backuplist:label"
+msgid "Materials"
+msgstr "Matériaux"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
+msgctxt "@backuplist:label"
+msgid "Profiles"
+msgstr "Profils"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
+msgctxt "@backuplist:label"
+msgid "Plugins"
+msgstr "Plug-ins"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
 msgctxt "@button"
-msgid "Cancel"
-msgstr "Annuler"
+msgid "Restore"
+msgstr "Restaurer"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:82
-msgctxt "@action:inmenu"
-msgid "Show Online Troubleshooting Guide"
-msgstr "Afficher le guide de dépannage en ligne"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
+msgctxt "@dialog:title"
+msgid "Delete Backup"
+msgstr "Supprimer la sauvegarde"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:89
-msgctxt "@action:inmenu"
-msgid "Toggle Full Screen"
-msgstr "Passer en Plein écran"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
+msgctxt "@dialog:info"
+msgid "Are you sure you want to delete this backup? This cannot be undone."
+msgstr "Êtes-vous sûr de vouloir supprimer cette sauvegarde ? Il est impossible d'annuler cette action."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:97
-msgctxt "@action:inmenu"
-msgid "Exit Full Screen"
-msgstr "Quitter le mode plein écran"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
+msgctxt "@dialog:title"
+msgid "Restore Backup"
+msgstr "Restaurer la sauvegarde"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:104
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Undo"
-msgstr "&Annuler"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
+msgctxt "@dialog:info"
+msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
+msgstr "Vous devez redémarrer Cura avant que votre sauvegarde ne soit restaurée. Voulez-vous fermer Cura maintenant ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:114
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Redo"
-msgstr "&Rétablir"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/main.qml:25
+msgctxt "@title:window"
+msgid "Cura Backups"
+msgstr "Sauvegardes Cura"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:13
+msgctxt "@label:category menu label"
+msgid "Material"
+msgstr "Matériau"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:54
+msgctxt "@label:category menu label"
+msgid "Favorites"
+msgstr "Favoris"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:79
+msgctxt "@label:category menu label"
+msgid "Generic"
+msgstr "Générique"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
+msgctxt "@title:menu menubar:toplevel"
+msgid "&File"
+msgstr "&Fichier"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:41
+msgctxt "@title:menu menubar:file"
+msgid "&Save Project..."
+msgstr "&Enregistrer le projet..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:74
+msgctxt "@title:menu menubar:file"
+msgid "&Export..."
+msgstr "E&xporter..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:85
 msgctxt "@action:inmenu menubar:file"
-msgid "&Quit"
-msgstr "&Quitter"
+msgid "Export Selection..."
+msgstr "Exporter la sélection..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:132
-msgctxt "@action:inmenu menubar:view"
-msgid "3D View"
-msgstr "Vue 3D"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open &Recent"
+msgstr "Ouvrir un fichier &récent"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
+msgctxt "@label"
+msgid "Select configuration"
+msgstr "Sélectionner la configuration"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
+msgctxt "@label"
+msgid "Configurations"
+msgstr "Configurations"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
+msgctxt "@header"
+msgid "Configurations"
+msgstr "Configurations"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
+msgctxt "@header"
+msgid "Custom"
+msgstr "Personnalisé"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:139
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+msgctxt "@label"
+msgid "Printer"
+msgstr "Imprimante"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+msgctxt "@label"
+msgid "Enabled"
+msgstr "Activé"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+msgctxt "@label"
+msgid "Material"
+msgstr "Matériau"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:394
+msgctxt "@label"
+msgid "Use glue for better adhesion with this material combination."
+msgstr "Utiliser de la colle pour une meilleure adhérence avec cette combinaison de matériaux."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+msgctxt "@label"
+msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
+msgstr "Cette configuration n'est pas disponible car %1 n'est pas reconnu. Veuillez visiter %2 pour télécharger le profil matériel correct."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+msgctxt "@label"
+msgid "Marketplace"
+msgstr "Marché en ligne"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
+msgctxt "@label"
+msgid "Loading available configurations from the printer..."
+msgstr "Chargement des configurations disponibles à partir de l'imprimante..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
+msgctxt "@label"
+msgid "The configurations are not available because the printer is disconnected."
+msgstr "Les configurations ne sont pas disponibles car l'imprimante est déconnectée."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:12
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
+msgctxt "@title:menu menubar:toplevel"
+msgid "&View"
+msgstr "&Visualisation"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:19
 msgctxt "@action:inmenu menubar:view"
-msgid "Front View"
-msgstr "Vue de face"
+msgid "&Camera position"
+msgstr "Position de la &caméra"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:44
 msgctxt "@action:inmenu menubar:view"
-msgid "Top View"
-msgstr "Vue du dessus"
+msgid "Camera view"
+msgstr "Vue de la caméra"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:47
 msgctxt "@action:inmenu menubar:view"
-msgid "Left Side View"
-msgstr "Vue latérale gauche"
+msgid "Perspective"
+msgstr "Perspective"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:160
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:59
 msgctxt "@action:inmenu menubar:view"
-msgid "Right Side View"
-msgstr "Vue latérale droite"
+msgid "Orthographic"
+msgstr "Orthographique"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:167
-msgctxt "@action:inmenu"
-msgid "Configure Cura..."
-msgstr "Configurer Cura..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:80
+msgctxt "@action:inmenu menubar:view"
+msgid "&Build plate"
+msgstr "&Plateau"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:174
-msgctxt "@action:inmenu menubar:printer"
-msgid "&Add Printer..."
-msgstr "&Ajouter une imprimante..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/PrinterMenu.qml:25
+msgctxt "@label:category menu label"
+msgid "Network enabled printers"
+msgstr "Imprimantes réseau"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:180
-msgctxt "@action:inmenu menubar:printer"
-msgid "Manage Pr&inters..."
-msgstr "Gérer les &imprimantes..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/PrinterMenu.qml:42
+msgctxt "@label:category menu label"
+msgid "Local printers"
+msgstr "Imprimantes locales"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:187
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
 msgctxt "@action:inmenu"
-msgid "Manage Materials..."
-msgstr "Gérer les matériaux..."
+msgid "Visible Settings"
+msgstr "Paramètres visibles"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:195
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
 msgctxt "@action:inmenu"
-msgid "Add more materials from Marketplace"
-msgstr "Ajouter d'autres matériaux du Marketplace"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:202
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Update profile with current settings/overrides"
-msgstr "&Mettre à jour le profil à l'aide des paramètres / forçages actuels"
+msgid "Collapse All Categories"
+msgstr "Réduire toutes les catégories"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:210
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Discard current changes"
-msgstr "&Ignorer les modifications actuelles"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
+msgctxt "@action:inmenu"
+msgid "Manage Setting Visibility..."
+msgstr "Gérer la visibilité des paramètres..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:222
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Create profile from current settings/overrides..."
-msgstr "&Créer un profil à partir des paramètres / forçages actuels..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Settings"
+msgstr "&Paramètres"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:228
-msgctxt "@action:inmenu menubar:profile"
-msgid "Manage Profiles..."
-msgstr "Gérer les profils..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:15
+msgctxt "@title:menu menubar:settings"
+msgid "&Printer"
+msgstr "Im&primante"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:236
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Online &Documentation"
-msgstr "Afficher la &documentation en ligne"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:29
+msgctxt "@title:menu"
+msgid "&Material"
+msgstr "&Matériau"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:244
-msgctxt "@action:inmenu menubar:help"
-msgid "Report a &Bug"
-msgstr "Notifier un &bug"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:44
+msgctxt "@action:inmenu"
+msgid "Set as Active Extruder"
+msgstr "Définir comme extrudeur actif"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:252
-msgctxt "@action:inmenu menubar:help"
-msgid "What's New"
-msgstr "Quoi de neuf"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:50
+msgctxt "@action:inmenu"
+msgid "Enable Extruder"
+msgstr "Activer l'extrudeuse"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:258
-msgctxt "@action:inmenu menubar:help"
-msgid "About..."
-msgstr "À propos de..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:57
+msgctxt "@action:inmenu"
+msgid "Disable Extruder"
+msgstr "Désactiver l'extrudeuse"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:265
-msgctxt "@action:inmenu menubar:edit"
-msgid "Delete Selected Model"
-msgid_plural "Delete Selected Models"
-msgstr[0] "Supprimer le modèle sélectionné"
-msgstr[1] "Supprimer les modèles sélectionnés"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Save Project..."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:275
-msgctxt "@action:inmenu menubar:edit"
-msgid "Center Selected Model"
-msgid_plural "Center Selected Models"
-msgstr[0] "Centrer le modèle sélectionné"
-msgstr[1] "Centrer les modèles sélectionnés"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:27
+msgctxt "@label"
+msgid "Print Selected Model With:"
+msgid_plural "Print Selected Models With:"
+msgstr[0] "Imprimer le modèle sélectionné avec :"
+msgstr[1] "Imprimer les modèles sélectionnés avec :"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:284
-msgctxt "@action:inmenu menubar:edit"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:116
+msgctxt "@title:window"
 msgid "Multiply Selected Model"
 msgid_plural "Multiply Selected Models"
 msgstr[0] "Multiplier le modèle sélectionné"
 msgstr[1] "Multiplier les modèles sélectionnés"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:293
-msgctxt "@action:inmenu"
-msgid "Delete Model"
-msgstr "Supprimer le modèle"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:141
+msgctxt "@label"
+msgid "Number of Copies"
+msgstr "Nombre de copies"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:301
-msgctxt "@action:inmenu"
-msgid "Ce&nter Model on Platform"
-msgstr "Ce&ntrer le modèle sur le plateau"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open File(s)..."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:307
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Group Models"
-msgstr "&Grouper les modèles"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
+msgctxt "@label:header"
+msgid "Custom profiles"
+msgstr "Personnaliser les profils"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:327
-msgctxt "@action:inmenu menubar:edit"
-msgid "Ungroup Models"
-msgstr "Dégrouper les modèles"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:564
+msgctxt "@action:button"
+msgid "Discard current changes"
+msgstr "Ignorer les modifications actuelles"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:337
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Merge Models"
-msgstr "&Fusionner les modèles"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
+msgctxt "@label"
+msgid "Profile"
+msgstr "Profil"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:347
-msgctxt "@action:inmenu"
-msgid "&Multiply Model..."
-msgstr "&Multiplier le modèle..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
+msgctxt "@tooltip"
+msgid ""
+"Some setting/override values are different from the values stored in the profile.\n"
+"\n"
+"Click to open the profile manager."
+msgstr ""
+"Certaines valeurs de paramètre / forçage sont différentes des valeurs enregistrées dans le profil. \n"
+"\n"
+"Cliquez pour ouvrir le gestionnaire de profils."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:354
-msgctxt "@action:inmenu menubar:edit"
-msgid "Select All Models"
-msgstr "Sélectionner tous les modèles"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
+msgctxt "@label:Should be short"
+msgid "On"
+msgstr "On"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:364
-msgctxt "@action:inmenu menubar:edit"
-msgid "Clear Build Plate"
-msgstr "Supprimer les objets du plateau"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
+msgctxt "@label:Should be short"
+msgid "Off"
+msgstr "Off"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:374
-msgctxt "@action:inmenu menubar:file"
-msgid "Reload All Models"
-msgstr "Recharger tous les modèles"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
+msgctxt "@label"
+msgid "Experimental"
+msgstr "Expérimental"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:383
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models To All Build Plates"
-msgstr "Réorganiser tous les modèles sur tous les plateaux"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+msgctxt "@button"
+msgid "Recommended"
+msgstr "Recommandé"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:390
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models"
-msgstr "Réorganiser tous les modèles"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+msgctxt "@button"
+msgid "Custom"
+msgstr "Personnalisé"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:398
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange Selection"
-msgstr "Réorganiser la sélection"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
+msgctxt "@label"
+msgid "Print settings"
+msgstr "Paramètres d'impression"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:405
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Positions"
-msgstr "Réinitialiser toutes les positions des modèles"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
+msgctxt "@label shown when we load a Gcode file"
+msgid "Print setup disabled. G-code file can not be modified."
+msgstr "Configuration d'impression désactivée. Le fichier G-Code ne peut pas être modifié."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:412
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Transformations"
-msgstr "Réinitialiser tous les modèles et transformations"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
+msgctxt "@label"
+msgid "Gradual infill"
+msgstr "Remplissage graduel"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:419
-msgctxt "@action:inmenu menubar:file"
-msgid "&Open File(s)..."
-msgstr "&Ouvrir le(s) fichier(s)..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
+msgctxt "@label"
+msgid "Gradual infill will gradually increase the amount of infill towards the top."
+msgstr "Un remplissage graduel augmentera la quantité de remplissage vers le haut."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:427
-msgctxt "@action:inmenu menubar:file"
-msgid "&New Project..."
-msgstr "&Nouveau projet..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:728
+msgctxt "@label"
+msgid "Profiles"
+msgstr "Profils"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:434
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Configuration Folder"
-msgstr "Afficher le dossier de configuration"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
+msgctxt "@tooltip"
+msgid "You have modified some profile settings. If you want to change these go to custom mode."
+msgstr "Vous avez modifié certains paramètres du profil. Si vous souhaitez les modifier, allez dans le mode Personnaliser."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:441 /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:538
-msgctxt "@action:menu"
-msgid "Configure setting visibility..."
-msgstr "Configurer la visibilité des paramètres..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+msgctxt "@label"
+msgid "Support"
+msgstr "Support"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:448
-msgctxt "@action:menu"
-msgid "&Marketplace"
-msgstr "&Marché en ligne"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
+msgctxt "@label"
+msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
+msgstr "Générer des structures pour soutenir les parties du modèle qui possèdent des porte-à-faux. Sans ces structures, ces parties s'effondreront durant l'impression."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:266
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
 msgctxt "@label"
-msgid "This package will be installed after restarting."
-msgstr "Ce paquet sera installé après le redémarrage."
+msgid "Adhesion"
+msgstr "Adhérence"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:459 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:15
-msgctxt "@title:tab"
-msgid "General"
-msgstr "Général"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
+msgctxt "@label"
+msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
+msgstr "Activez l'impression d'une bordure ou plaquette (Brim/Raft). Cela ajoutera une zone plate autour de ou sous votre objet qui est facile à découper par la suite."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:462
-msgctxt "@title:tab"
-msgid "Settings"
-msgstr "Paramètres"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
+msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
+msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
+msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
+msgstr[0] "Il n'y a pas de profil %1 pour la configuration dans l'extrudeur %2. L'intention par défaut sera utilisée à la place"
+msgstr[1] "Il n'y a pas de profil %1 pour les configurations dans les extrudeurs %2. L'intention par défaut sera utilisée à la place"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:464 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:16
-msgctxt "@title:tab"
-msgid "Printers"
-msgstr "Imprimantes"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Widgets/ComboBox.qml:24
+msgctxt "@label"
+msgid "No items to select from"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:468 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:34
-msgctxt "@title:tab"
-msgid "Profiles"
-msgstr "Profils"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:140
+msgctxt "@label"
+msgid "Active print"
+msgstr "Activer l'impression"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:587
-msgctxt "@title:window %1 is the application name"
-msgid "Closing %1"
-msgstr "Fermeture de %1"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:148
+msgctxt "@label"
+msgid "Job Name"
+msgstr "Nom de la tâche"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:588 /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:600
-msgctxt "@label %1 is the application name"
-msgid "Are you sure you want to exit %1?"
-msgstr "Voulez-vous vraiment quitter %1 ?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:156
+msgctxt "@label"
+msgid "Printing Time"
+msgstr "Durée d'impression"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:638 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:164
+msgctxt "@label"
+msgid "Estimated time left"
+msgstr "Durée restante estimée"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
 msgctxt "@title:window"
-msgid "Open file(s)"
-msgstr "Ouvrir le(s) fichier(s)"
+msgid "Discard or Keep changes"
+msgstr "Annuler ou conserver les modifications"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:744
-msgctxt "@window:title"
-msgid "Install Package"
-msgstr "Installer le paquet"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
+msgctxt "@text:window, %1 is a profile name"
+msgid ""
+"You have customized some profile settings.\n"
+"Would you like to Keep these changed settings after switching profiles?\n"
+"Alternatively, you can discard the changes to load the defaults from '%1'."
+msgstr ""
+"Vous avez personnalisé certains paramètres de profil.\n"
+"Souhaitez-vous conserver ces paramètres modifiés après avoir changé de profil ?\n"
+"Vous pouvez également annuler les modifications pour charger les valeurs par défaut de '%1'."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:752
-msgctxt "@title:window"
-msgid "Open File(s)"
-msgstr "Ouvrir le(s) fichier(s)"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
+msgctxt "@title:column"
+msgid "Profile settings"
+msgstr "Paramètres du profil"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:755
-msgctxt "@text:window"
-msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
-msgstr "Nous avons trouvé au moins un fichier G-Code parmi les fichiers que vous avez sélectionné. Vous ne pouvez ouvrir qu'un seul fichier G-Code à la fois. Si vous souhaitez ouvrir un fichier G-Code, veuillez ne sélectionner qu'un seul fichier de ce type."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125
+msgctxt "@title:column"
+msgid "Current changes"
+msgstr "Modifications actuelles"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:858
-msgctxt "@title:window"
-msgid "Add Printer"
-msgstr "Ajouter une imprimante"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:747
+msgctxt "@option:discardOrKeep"
+msgid "Always ask me this"
+msgstr "Toujours me demander"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:866
-msgctxt "@title:window"
-msgid "What's New"
-msgstr "Quoi de neuf"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:159
+msgctxt "@option:discardOrKeep"
+msgid "Discard and never ask again"
+msgstr "Annuler et ne plus me demander"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
+msgctxt "@option:discardOrKeep"
+msgid "Keep and never ask again"
+msgstr "Conserver et ne plus me demander"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:197
+msgctxt "@action:button"
+msgid "Discard changes"
+msgstr "Annuler les modifications"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:210
+msgctxt "@action:button"
+msgid "Keep changes"
+msgstr "Conserver les modifications"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:15
 msgctxt "@title:window The argument is the application name."
 msgid "About %1"
 msgstr "À propos de %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:57
 msgctxt "@label"
 msgid "version: %1"
 msgstr "version : %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:72
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:72
 msgctxt "@label"
 msgid "End-to-end solution for fused filament 3D printing."
 msgstr "Solution complète pour l'impression 3D par dépôt de filament fondu."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:85
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:85
 msgctxt "@info:credit"
 msgid ""
 "Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
@@ -3475,1982 +3607,2103 @@ msgstr ""
 "Cura a été développé par Ultimaker B.V. en coopération avec la communauté Ultimaker.\n"
 "Cura est fier d'utiliser les projets open source suivants :"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:135
 msgctxt "@label"
 msgid "Graphical user interface"
 msgstr "Interface utilisateur graphique"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:136
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:136
 msgctxt "@label"
 msgid "Application framework"
 msgstr "Cadre d'application"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:137
 msgctxt "@label"
 msgid "G-code generator"
 msgstr "Générateur G-Code"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:138
 msgctxt "@label"
 msgid "Interprocess communication library"
 msgstr "Bibliothèque de communication interprocess"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:140
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:140
 msgctxt "@label"
 msgid "Programming language"
 msgstr "Langage de programmation"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:141
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:141
 msgctxt "@label"
 msgid "GUI framework"
 msgstr "Cadre IUG"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:142
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:142
 msgctxt "@label"
 msgid "GUI framework bindings"
 msgstr "Liens cadre IUG"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:143
 msgctxt "@label"
 msgid "C/C++ Binding library"
 msgstr "Bibliothèque C/C++ Binding"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:144
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:144
 msgctxt "@label"
 msgid "Data interchange format"
 msgstr "Format d'échange de données"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:145
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:145
 msgctxt "@label"
 msgid "Support library for scientific computing"
 msgstr "Prise en charge de la bibliothèque pour le calcul scientifique"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:146
 msgctxt "@label"
 msgid "Support library for faster math"
 msgstr "Prise en charge de la bibliothèque pour des maths plus rapides"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:147
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:147
 msgctxt "@label"
 msgid "Support library for handling STL files"
 msgstr "Prise en charge de la bibliothèque pour le traitement des fichiers STL"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:148
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:148
 msgctxt "@label"
 msgid "Support library for handling planar objects"
 msgstr "Prise en charge de la bibliothèque pour le traitement des objets planaires"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:149
 msgctxt "@label"
 msgid "Support library for handling triangular meshes"
 msgstr "Prise en charge de la bibliothèque pour le traitement des mailles triangulaires"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:150
 msgctxt "@label"
 msgid "Support library for handling 3MF files"
 msgstr "Prise en charge de la bibliothèque pour le traitement des fichiers 3MF"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:151
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:151
 msgctxt "@label"
 msgid "Support library for file metadata and streaming"
 msgstr "Prise en charge de la bibliothèque pour les métadonnées et le streaming de fichiers"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:152
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:152
 msgctxt "@label"
 msgid "Serial communication library"
 msgstr "Bibliothèque de communication série"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:153
 msgctxt "@label"
 msgid "ZeroConf discovery library"
 msgstr "Bibliothèque de découverte ZeroConf"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:154
 msgctxt "@label"
 msgid "Polygon clipping library"
 msgstr "Bibliothèque de découpe polygone"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:155
 msgctxt "@Label"
 msgid "Static type checker for Python"
 msgstr "Vérificateur de type statique pour Python"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:156 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:157
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:157
 msgctxt "@Label"
 msgid "Root Certificates for validating SSL trustworthiness"
 msgstr "Certificats racines pour valider la fiabilité SSL"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:158
 msgctxt "@Label"
 msgid "Python Error tracking library"
 msgstr "Bibliothèque de suivi des erreurs Python"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:159
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
 msgstr "Bibliothèque d'emballage de polygones, développée par Prusa Research"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
 msgstr "Liens en python pour libnest2d"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:161
+msgctxt "@label"
+msgid "Support library for system keyring access"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+msgctxt "@label"
+msgid "Python extensions for Microsoft Windows"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:163
 msgctxt "@label"
 msgid "Font"
 msgstr "Police"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:163
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:164
 msgctxt "@label"
 msgid "SVG icons"
 msgstr "Icônes SVG"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:164
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:165
 msgctxt "@label"
 msgid "Linux cross-distribution application deployment"
 msgstr "Déploiement d'applications sur multiples distributions Linux"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:627
 msgctxt "@title:window"
-msgid "Open project file"
-msgstr "Ouvrir un fichier de projet"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:93
-msgctxt "@text:window"
-msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
-msgstr "Ceci est un fichier de projet Cura. Souhaitez-vous l'ouvrir comme projet ou en importer les modèles ?"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:103
-msgctxt "@text:window"
-msgid "Remember my choice"
-msgstr "Se souvenir de mon choix"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:122
-msgctxt "@action:button"
-msgid "Open as project"
-msgstr "Ouvrir comme projet"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:131
-msgctxt "@action:button"
-msgid "Import models"
-msgstr "Importer les modèles"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
-msgctxt "@title:window"
-msgid "Discard or Keep changes"
-msgstr "Annuler ou conserver les modifications"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
-msgctxt "@text:window, %1 is a profile name"
-msgid ""
-"You have customized some profile settings.\n"
-"Would you like to Keep these changed settings after switching profiles?\n"
-"Alternatively, you can discard the changes to load the defaults from '%1'."
-msgstr ""
-"Vous avez personnalisé certains paramètres de profil.\n"
-"Souhaitez-vous conserver ces paramètres modifiés après avoir changé de profil ?\n"
-"Vous pouvez également annuler les modifications pour charger les valeurs par défaut de '%1'."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
-msgctxt "@title:column"
-msgid "Profile settings"
-msgstr "Paramètres du profil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125
-msgctxt "@title:column"
-msgid "Current changes"
-msgstr "Modifications actuelles"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:747
-msgctxt "@option:discardOrKeep"
-msgid "Always ask me this"
-msgstr "Toujours me demander"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:159
-msgctxt "@option:discardOrKeep"
-msgid "Discard and never ask again"
-msgstr "Annuler et ne plus me demander"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
-msgctxt "@option:discardOrKeep"
-msgid "Keep and never ask again"
-msgstr "Conserver et ne plus me demander"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:197
-msgctxt "@action:button"
-msgid "Discard changes"
-msgstr "Annuler les modifications"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:210
-msgctxt "@action:button"
-msgid "Keep changes"
-msgstr "Conserver les modifications"
+msgid "Open file(s)"
+msgstr "Ouvrir le(s) fichier(s)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
 msgctxt "@text:window"
 msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
 msgstr "Nous avons trouvé au moins un fichier de projet parmi les fichiers que vous avez sélectionnés. Vous ne pouvez ouvrir qu'un seul fichier de projet à la fois. Nous vous conseillons de n'importer que les modèles de ces fichiers. Souhaitez-vous continuer ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:94
 msgctxt "@action:button"
 msgid "Import all as models"
 msgstr "Importer tout comme modèles"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
 msgctxt "@title:window"
 msgid "Save Project"
 msgstr "Enregistrer le projet"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:173
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:173
 msgctxt "@action:label"
 msgid "Extruder %1"
 msgstr "Extrudeuse %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:189
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:189
 msgctxt "@action:label"
 msgid "%1 & material"
 msgstr "%1 & matériau"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191
 msgctxt "@action:label"
 msgid "Material"
 msgstr "Matériau"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:281
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:281
 msgctxt "@action:label"
 msgid "Don't show project summary on save again"
 msgstr "Ne pas afficher à nouveau le résumé du projet lors de l'enregistrement"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:300
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:300
 msgctxt "@action:button"
 msgid "Save"
 msgstr "Enregistrer"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ExtruderButton.qml:16
-msgctxt "@label %1 is filled in with the name of an extruder"
-msgid "Print Selected Model with %1"
-msgid_plural "Print Selected Models with %1"
-msgstr[0] "Imprimer le modèle sélectionné avec %1"
-msgstr[1] "Imprimer les modèles sélectionnés avec %1"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
+msgctxt "@title:window"
+msgid "Open project file"
+msgstr "Ouvrir un fichier de projet"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:88
+msgctxt "@text:window"
+msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
+msgstr "Ceci est un fichier de projet Cura. Souhaitez-vous l'ouvrir comme projet ou en importer les modèles ?"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:98
+msgctxt "@text:window"
+msgid "Remember my choice"
+msgstr "Se souvenir de mon choix"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:117
+msgctxt "@action:button"
+msgid "Open as project"
+msgstr "Ouvrir comme projet"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:126
+msgctxt "@action:button"
+msgid "Import models"
+msgstr "Importer les modèles"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/JobSpecs.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/JobSpecs.qml:99
 msgctxt "@text Print job name"
 msgid "Untitled"
 msgstr "Sans titre"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&File"
-msgstr "&Fichier"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
+msgctxt "@label"
+msgid "Welcome to Ultimaker Cura"
+msgstr "Bienvenue dans Ultimaker Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Edit"
-msgstr "&Modifier"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
+msgctxt "@text"
+msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:12
-msgctxt "@title:menu menubar:toplevel"
-msgid "&View"
-msgstr "&Visualisation"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+msgctxt "@button"
+msgid "Get started"
+msgstr "Prise en main"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Settings"
-msgstr "&Paramètres"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+msgctxt "@label"
+msgid "Empty"
+msgstr "Vide"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:56
-msgctxt "@title:menu menubar:toplevel"
-msgid "E&xtensions"
-msgstr "E&xtensions"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+msgctxt "@label"
+msgid "Help us to improve Ultimaker Cura"
+msgstr "Aidez-nous à améliorer Ultimaker Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:94
-msgctxt "@title:menu menubar:toplevel"
-msgid "P&references"
-msgstr "P&références"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
+msgctxt "@text"
+msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
+msgstr "Ultimaker Cura recueille des données anonymes pour améliorer la qualité d'impression et l'expérience utilisateur, notamment :"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:102
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Help"
-msgstr "&Aide"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
+msgctxt "@text"
+msgid "Machine types"
+msgstr "Types de machines"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148
-msgctxt "@title:window"
-msgid "New project"
-msgstr "Nouveau projet"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
+msgctxt "@text"
+msgid "Material usage"
+msgstr "Utilisation du matériau"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:149
-msgctxt "@info:question"
-msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
-msgstr "Êtes-vous sûr(e) de souhaiter lancer un nouveau projet ? Cela supprimera les objets du plateau ainsi que tous paramètres non enregistrés."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
+msgctxt "@text"
+msgid "Number of slices"
+msgstr "Nombre de découpes"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
-msgctxt "@action:button"
-msgid "Marketplace"
-msgstr "Marché en ligne"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
+msgctxt "@text"
+msgid "Print settings"
+msgstr "Paramètres d'impression"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
-msgctxt "@header"
-msgid "Configurations"
-msgstr "Configurations"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
+msgctxt "@text"
+msgid "Data collected by Ultimaker Cura will not contain any personal information."
+msgstr "Les données recueillies par Ultimaker Cura ne contiendront aucun renseignement personnel."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
+msgctxt "@text"
+msgid "More information"
+msgstr "Plus d'informations"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
 msgctxt "@label"
-msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
-msgstr "Cette configuration n'est pas disponible car %1 n'est pas reconnu. Veuillez visiter %2 pour télécharger le profil matériel correct."
+msgid "Add printer by IP address"
+msgstr "Ajouter une imprimante par adresse IP"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
+msgctxt "@text"
+msgid "Enter your printer's IP address."
+msgstr "Saisissez l'adresse IP de votre imprimante."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+msgctxt "@button"
+msgid "Add"
+msgstr "Ajouter"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
 msgctxt "@label"
-msgid "Marketplace"
-msgstr "Marché en ligne"
+msgid "Could not connect to device."
+msgstr "Impossible de se connecter à l'appareil."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
 msgctxt "@label"
-msgid "Loading available configurations from the printer..."
-msgstr "Chargement des configurations disponibles à partir de l'imprimante..."
+msgid "Can't connect to your Ultimaker printer?"
+msgstr "Impossible de vous connecter à votre imprimante Ultimaker ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
 msgctxt "@label"
-msgid "The configurations are not available because the printer is disconnected."
-msgstr "Les configurations ne sont pas disponibles car l'imprimante est déconnectée."
+msgid "The printer at this address has not responded yet."
+msgstr "L'imprimante à cette adresse n'a pas encore répondu."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
 msgctxt "@label"
-msgid "Select configuration"
-msgstr "Sélectionner la configuration"
+msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
+msgstr "Cette imprimante ne peut pas être ajoutée parce qu'il s'agit d'une imprimante inconnue ou de l'hôte d'un groupe."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+msgctxt "@button"
+msgid "Back"
+msgstr "Précédent"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+msgctxt "@button"
+msgid "Connect"
+msgstr "Se connecter"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
 msgctxt "@label"
-msgid "Configurations"
-msgstr "Configurations"
+msgid "Add a printer"
+msgstr "Ajouter une imprimante"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
-msgctxt "@header"
-msgid "Custom"
-msgstr "Personnalisé"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+msgctxt "@label"
+msgid "Add a networked printer"
+msgstr "Ajouter une imprimante en réseau"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
 msgctxt "@label"
-msgid "Printer"
-msgstr "Imprimante"
+msgid "Add a non-networked printer"
+msgstr "Ajouter une imprimante hors réseau"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:28
 msgctxt "@label"
-msgid "Enabled"
-msgstr "Activé"
+msgid "What's New"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
 msgctxt "@label"
-msgid "Material"
-msgstr "Matériau"
+msgid "Add a Cloud printer"
+msgstr "Ajouter une imprimante cloud"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:394
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
 msgctxt "@label"
-msgid "Use glue for better adhesion with this material combination."
-msgstr "Utiliser de la colle pour une meilleure adhérence avec cette combinaison de matériaux."
+msgid "Waiting for Cloud response"
+msgstr "En attente d'une réponse cloud"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:27
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
 msgctxt "@label"
-msgid "Print Selected Model With:"
-msgid_plural "Print Selected Models With:"
-msgstr[0] "Imprimer le modèle sélectionné avec :"
-msgstr[1] "Imprimer les modèles sélectionnés avec :"
+msgid "No printers found in your account?"
+msgstr "Aucune imprimante trouvée dans votre compte ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:116
-msgctxt "@title:window"
-msgid "Multiply Selected Model"
-msgid_plural "Multiply Selected Models"
-msgstr[0] "Multiplier le modèle sélectionné"
-msgstr[1] "Multiplier les modèles sélectionnés"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
+msgctxt "@label"
+msgid "The following printers in your account have been added in Cura:"
+msgstr "Les imprimantes suivantes de votre compte ont été ajoutées à Cura :"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+msgctxt "@button"
+msgid "Add printer manually"
+msgstr "Ajouter l'imprimante manuellement"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:141
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:64
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:20
 msgctxt "@label"
-msgid "Number of Copies"
-msgstr "Nombre de copies"
+msgid "Sign in to the Ultimaker platform"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:33
-msgctxt "@title:menu menubar:file"
-msgid "&Save Project..."
-msgstr "&Enregistrer le projet..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+msgctxt "@text"
+msgid "Add material settings and plugins from the Marketplace"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:54
-msgctxt "@title:menu menubar:file"
-msgid "&Export..."
-msgstr "E&xporter..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:154
+msgctxt "@text"
+msgid "Backup and sync your material settings and plugins"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:65
-msgctxt "@action:inmenu menubar:file"
-msgid "Export Selection..."
-msgstr "Exporter la sélection..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+msgctxt "@text"
+msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:13
-msgctxt "@label:category menu label"
-msgid "Material"
-msgstr "Matériau"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:217
+msgctxt "@text"
+msgid "Create a free Ultimaker Account"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:54
-msgctxt "@label:category menu label"
-msgid "Favorites"
-msgstr "Favoris"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:230
+msgctxt "@button"
+msgid "Skip"
+msgstr "Ignorer"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:79
-msgctxt "@label:category menu label"
-msgid "Generic"
-msgstr "Générique"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
+msgctxt "@label"
+msgid "User Agreement"
+msgstr "Accord utilisateur"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:25
-msgctxt "@label:category menu label"
-msgid "Network enabled printers"
-msgstr "Imprimantes réseau"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
+msgctxt "@button"
+msgid "Decline and close"
+msgstr "Décliner et fermer"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:42
-msgctxt "@label:category menu label"
-msgid "Local printers"
-msgstr "Imprimantes locales"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
+msgctxt "@label"
+msgid "Release Notes"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open &Recent"
-msgstr "Ouvrir un fichier &récent"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+msgctxt "@label"
+msgid "There is no printer found over your network."
+msgstr "Aucune imprimante n'a été trouvée sur votre réseau."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:15
-msgctxt "@title:menu menubar:settings"
-msgid "&Printer"
-msgstr "Im&primante"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+msgctxt "@label"
+msgid "Refresh"
+msgstr "Rafraîchir"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:29
-msgctxt "@title:menu"
-msgid "&Material"
-msgstr "&Matériau"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+msgctxt "@label"
+msgid "Add printer by IP"
+msgstr "Ajouter une imprimante par IP"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:44
-msgctxt "@action:inmenu"
-msgid "Set as Active Extruder"
-msgstr "Définir comme extrudeur actif"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
+msgctxt "@label"
+msgid "Add cloud printer"
+msgstr "Ajouter une imprimante cloud"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:50
-msgctxt "@action:inmenu"
-msgid "Enable Extruder"
-msgstr "Activer l'extrudeuse"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:240
+msgctxt "@label"
+msgid "Troubleshooting"
+msgstr "Dépannage"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:57
-msgctxt "@action:inmenu"
-msgid "Disable Extruder"
-msgstr "Désactiver l'extrudeuse"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:230
+msgctxt "@label"
+msgid "Manufacturer"
+msgstr "Fabricant"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:247
+msgctxt "@label"
+msgid "Profile author"
+msgstr "Auteur du profil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:265
+msgctxt "@label"
+msgid "Printer name"
+msgstr "Nom de l'imprimante"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
+msgctxt "@text"
+msgid "Please name your printer"
+msgstr "Veuillez nommer votre imprimante"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:81
+msgctxt "@label The argument is a timestamp"
+msgid "Last update: %1"
+msgstr "Dernière mise à jour : %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:109
+msgctxt "@button"
+msgid "Ultimaker Account"
+msgstr "Compte Ultimaker"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:125
+msgctxt "@button"
+msgid "Sign Out"
+msgstr "Déconnexion"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:42
+msgctxt "@text"
+msgid ""
+"- Add material profiles and plug-ins from the Marketplace\n"
+"- Back-up and sync your material profiles and plug-ins\n"
+"- Share ideas and get help from 48,000+ users in the Ultimaker community"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:62
+msgctxt "@button"
+msgid "Create a free Ultimaker account"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/AccountWidget.qml:24
+msgctxt "@action:button"
+msgid "Sign in"
+msgstr "Se connecter"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:28
+msgctxt "@label"
+msgid "Checking..."
+msgstr "Vérification en cours..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:35
+msgctxt "@label"
+msgid "Account synced"
+msgstr "Compte synchronisé"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:42
+msgctxt "@label"
+msgid "Something went wrong..."
+msgstr "Un problème s'est produit..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:96
+msgctxt "@button"
+msgid "Install pending updates"
+msgstr "Installer les mises à jour en attente"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:118
+msgctxt "@button"
+msgid "Check for account updates"
+msgstr "Rechercher des mises à jour de compte"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectSelector.qml:59
+msgctxt "@label"
+msgid "Object list"
+msgstr "Liste d'objets"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:82
 msgctxt "@action:inmenu"
-msgid "Visible Settings"
-msgstr "Paramètres visibles"
+msgid "Show Online Troubleshooting Guide"
+msgstr "Afficher le guide de dépannage en ligne"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:89
 msgctxt "@action:inmenu"
-msgid "Collapse All Categories"
-msgstr "Réduire toutes les catégories"
+msgid "Toggle Full Screen"
+msgstr "Passer en Plein écran"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:97
 msgctxt "@action:inmenu"
-msgid "Manage Setting Visibility..."
-msgstr "Gérer la visibilité des paramètres..."
+msgid "Exit Full Screen"
+msgstr "Quitter le mode plein écran"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:104
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Undo"
+msgstr "&Annuler"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:114
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Redo"
+msgstr "&Rétablir"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:124
+msgctxt "@action:inmenu menubar:file"
+msgid "&Quit"
+msgstr "&Quitter"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:132
 msgctxt "@action:inmenu menubar:view"
-msgid "&Camera position"
-msgstr "Position de la &caméra"
+msgid "3D View"
+msgstr "Vue 3D"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:44
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:139
 msgctxt "@action:inmenu menubar:view"
-msgid "Camera view"
-msgstr "Vue de la caméra"
+msgid "Front View"
+msgstr "Vue de face"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:47
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:146
 msgctxt "@action:inmenu menubar:view"
-msgid "Perspective"
-msgstr "Perspective"
+msgid "Top View"
+msgstr "Vue du dessus"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:153
 msgctxt "@action:inmenu menubar:view"
-msgid "Orthographic"
-msgstr "Orthographique"
+msgid "Left Side View"
+msgstr "Vue latérale gauche"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:160
 msgctxt "@action:inmenu menubar:view"
-msgid "&Build plate"
-msgstr "&Plateau"
+msgid "Right Side View"
+msgstr "Vue latérale droite"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:119
-msgctxt "@label:MonitorStatus"
-msgid "Not connected to a printer"
-msgstr "Non connecté à une imprimante"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:167
+msgctxt "@action:inmenu"
+msgid "Configure Cura..."
+msgstr "Configurer Cura..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:123
-msgctxt "@label:MonitorStatus"
-msgid "Printer does not accept commands"
-msgstr "L'imprimante n'accepte pas les commandes"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:174
+msgctxt "@action:inmenu menubar:printer"
+msgid "&Add Printer..."
+msgstr "&Ajouter une imprimante..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:133
-msgctxt "@label:MonitorStatus"
-msgid "In maintenance. Please check the printer"
-msgstr "En maintenance. Vérifiez l'imprimante"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:180
+msgctxt "@action:inmenu menubar:printer"
+msgid "Manage Pr&inters..."
+msgstr "Gérer les &imprimantes..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:144
-msgctxt "@label:MonitorStatus"
-msgid "Lost connection with the printer"
-msgstr "Connexion avec l'imprimante perdue"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:187
+msgctxt "@action:inmenu"
+msgid "Manage Materials..."
+msgstr "Gérer les matériaux..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:146
-msgctxt "@label:MonitorStatus"
-msgid "Printing..."
-msgstr "Impression..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:195
+msgctxt "@action:inmenu"
+msgid "Add more materials from Marketplace"
+msgstr "Ajouter d'autres matériaux du Marketplace"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:149
-msgctxt "@label:MonitorStatus"
-msgid "Paused"
-msgstr "En pause"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:202
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Update profile with current settings/overrides"
+msgstr "&Mettre à jour le profil à l'aide des paramètres / forçages actuels"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:152
-msgctxt "@label:MonitorStatus"
-msgid "Preparing..."
-msgstr "Préparation..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:210
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Discard current changes"
+msgstr "&Ignorer les modifications actuelles"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:154
-msgctxt "@label:MonitorStatus"
-msgid "Please remove the print"
-msgstr "Supprimez l'imprimante"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:222
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Create profile from current settings/overrides..."
+msgstr "&Créer un profil à partir des paramètres / forçages actuels..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:228
+msgctxt "@action:inmenu menubar:profile"
+msgid "Manage Profiles..."
+msgstr "Gérer les profils..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:325
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:236
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Online &Documentation"
+msgstr "Afficher la &documentation en ligne"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:244
+msgctxt "@action:inmenu menubar:help"
+msgid "Report a &Bug"
+msgstr "Notifier un &bug"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:252
+msgctxt "@action:inmenu menubar:help"
+msgid "What's New"
+msgstr "Quoi de neuf"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:258
+msgctxt "@action:inmenu menubar:help"
+msgid "About..."
+msgstr "À propos de..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:265
+msgctxt "@action:inmenu menubar:edit"
+msgid "Delete Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:275
+msgctxt "@action:inmenu menubar:edit"
+msgid "Center Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:284
+msgctxt "@action:inmenu menubar:edit"
+msgid "Multiply Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:293
+msgctxt "@action:inmenu"
+msgid "Delete Model"
+msgstr "Supprimer le modèle"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:301
+msgctxt "@action:inmenu"
+msgid "Ce&nter Model on Platform"
+msgstr "Ce&ntrer le modèle sur le plateau"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:307
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Group Models"
+msgstr "&Grouper les modèles"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:327
+msgctxt "@action:inmenu menubar:edit"
+msgid "Ungroup Models"
+msgstr "Dégrouper les modèles"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:337
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Merge Models"
+msgstr "&Fusionner les modèles"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:347
+msgctxt "@action:inmenu"
+msgid "&Multiply Model..."
+msgstr "&Multiplier le modèle..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:354
+msgctxt "@action:inmenu menubar:edit"
+msgid "Select All Models"
+msgstr "Sélectionner tous les modèles"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:364
+msgctxt "@action:inmenu menubar:edit"
+msgid "Clear Build Plate"
+msgstr "Supprimer les objets du plateau"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:374
+msgctxt "@action:inmenu menubar:file"
+msgid "Reload All Models"
+msgstr "Recharger tous les modèles"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:383
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models To All Build Plates"
+msgstr "Réorganiser tous les modèles sur tous les plateaux"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:390
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models"
+msgstr "Réorganiser tous les modèles"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:398
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange Selection"
+msgstr "Réorganiser la sélection"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:405
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Positions"
+msgstr "Réinitialiser toutes les positions des modèles"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:412
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Transformations"
+msgstr "Réinitialiser tous les modèles et transformations"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:421
+msgctxt "@action:inmenu menubar:file"
+msgid "&Open File(s)..."
+msgstr "&Ouvrir le(s) fichier(s)..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:431
+msgctxt "@action:inmenu menubar:file"
+msgid "&New Project..."
+msgstr "&Nouveau projet..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:438
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Configuration Folder"
+msgstr "Afficher le dossier de configuration"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:445
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:538
+msgctxt "@action:menu"
+msgid "Configure setting visibility..."
+msgstr "Configurer la visibilité des paramètres..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:452
+msgctxt "@action:menu"
+msgid "&Marketplace"
+msgstr "&Marché en ligne"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:61
+msgctxt "@info:status"
+msgid "Calculated"
+msgstr "Calculer"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:75
+msgctxt "@title:column"
+msgid "Setting"
+msgstr "Paramètre"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:82
+msgctxt "@title:column"
+msgid "Profile"
+msgstr "Profil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:89
+msgctxt "@title:column"
+msgid "Current"
+msgstr "Actuel"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:97
+msgctxt "@title:column"
+msgid "Unit"
+msgstr "Unité"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
+msgctxt "@title"
+msgid "Information"
+msgstr "Informations"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
+msgctxt "@title:window"
+msgid "Confirm Diameter Change"
+msgstr "Confirmer le changement de diamètre"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
+msgctxt "@label (%1 is a number)"
+msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
+msgstr "Le nouveau diamètre de filament est réglé sur %1 mm, ce qui n'est pas compatible avec l'extrudeuse actuelle. Souhaitez-vous poursuivre ?"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
 msgctxt "@label"
-msgid "Abort Print"
-msgstr "Abandonner l'impression"
+msgid "Display Name"
+msgstr "Afficher le nom"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:337
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
 msgctxt "@label"
-msgid "Are you sure you want to abort the print?"
-msgstr "Êtes-vous sûr(e) de vouloir abandonner l'impression ?"
+msgid "Material Type"
+msgstr "Type de matériau"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:114
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
 msgctxt "@label"
-msgid "Is printed as support."
-msgstr "Est imprimé comme support."
+msgid "Color"
+msgstr "Couleur"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
 msgctxt "@label"
-msgid "Other models overlapping with this model are modified."
-msgstr "D'autres modèles qui se chevauchent avec ce modèle ont été modifiés."
+msgid "Properties"
+msgstr "Propriétés"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:120
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
 msgctxt "@label"
-msgid "Infill overlapping with this model is modified."
-msgstr "Le chevauchement de remplissage avec ce modèle a été modifié."
+msgid "Density"
+msgstr "Densité"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:123
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
 msgctxt "@label"
-msgid "Overlaps with this model are not supported."
-msgstr "Les chevauchements avec ce modèle ne sont pas pris en charge."
+msgid "Diameter"
+msgstr "Diamètre"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:130
-msgctxt "@label %1 is the number of settings it overrides."
-msgid "Overrides %1 setting."
-msgid_plural "Overrides %1 settings."
-msgstr[0] "Remplace le paramètre %1."
-msgstr[1] "Remplace les paramètres %1."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
+msgctxt "@label"
+msgid "Filament Cost"
+msgstr "Coût du filament"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectSelector.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
 msgctxt "@label"
-msgid "Object list"
-msgstr "Liste d'objets"
+msgid "Filament weight"
+msgstr "Poids du filament"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
+msgctxt "@label"
+msgid "Filament length"
+msgstr "Longueur du filament"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+msgctxt "@label"
+msgid "Cost per Meter"
+msgstr "Coût au mètre"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+msgctxt "@label"
+msgid "This material is linked to %1 and shares some of its properties."
+msgstr "Ce matériau est lié à %1 et partage certaines de ses propriétés."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
+msgctxt "@label"
+msgid "Unlink Material"
+msgstr "Délier le matériau"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
+msgctxt "@label"
+msgid "Description"
+msgstr "Description"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+msgctxt "@label"
+msgid "Adhesion Information"
+msgstr "Informations d'adhérence"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:40
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:84
+msgctxt "@action:button"
+msgid "Activate"
+msgstr "Activer"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
+msgctxt "@action:button"
+msgid "Create"
+msgstr "Créer"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
+msgctxt "@action:button"
+msgid "Duplicate"
+msgstr "Dupliquer"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:167
+msgctxt "@action:button"
+msgid "Import"
+msgstr "Importer"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:179
+msgctxt "@action:button"
+msgid "Export"
+msgstr "Exporter"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
+msgctxt "@action:label"
+msgid "Printer"
+msgstr "Imprimante"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:277
+msgctxt "@title:window"
+msgid "Confirm Remove"
+msgstr "Confirmer la suppression"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:278
+msgctxt "@label (%1 is object name)"
+msgid "Are you sure you wish to remove %1? This cannot be undone!"
+msgstr "Êtes-vous sûr de vouloir supprimer l'objet %1 ? Vous ne pourrez pas revenir en arrière !"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
+msgctxt "@title:window"
+msgid "Import Material"
+msgstr "Importer un matériau"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
+msgstr "Impossible d'importer le matériau <filename>%1</filename> : <message>%2</message>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully imported material <filename>%1</filename>"
+msgstr "Matériau <filename>%1</filename> importé avec succès"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
+msgctxt "@title:window"
+msgid "Export Material"
+msgstr "Exporter un matériau"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
+msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
+msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
+msgstr "Échec de l'exportation de matériau vers <filename>%1</filename> : <message>%2</message>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully exported material to <filename>%1</filename>"
+msgstr "Matériau exporté avec succès vers <filename>%1</filename>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:16
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:455
+msgctxt "@title:tab"
+msgid "Printers"
+msgstr "Imprimantes"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:63
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:152
+msgctxt "@action:button"
+msgid "Rename"
+msgstr "Renommer"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:459
+msgctxt "@title:tab"
+msgid "Profiles"
+msgstr "Profils"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:104
+msgctxt "@label"
+msgid "Create"
+msgstr "Créer"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+msgctxt "@label"
+msgid "Duplicate"
+msgstr "Dupliquer"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:202
+msgctxt "@title:window"
+msgid "Create Profile"
+msgstr "Créer un profil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:204
+msgctxt "@info"
+msgid "Please provide a name for this profile."
+msgstr "Veuillez fournir un nom pour ce profil."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:263
+msgctxt "@title:window"
+msgid "Duplicate Profile"
+msgstr "Dupliquer un profil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:294
+msgctxt "@title:window"
+msgid "Rename Profile"
+msgstr "Renommer le profil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:307
+msgctxt "@title:window"
+msgid "Import Profile"
+msgstr "Importer un profil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:336
+msgctxt "@title:window"
+msgid "Export Profile"
+msgstr "Exporter un profil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:399
+msgctxt "@label %1 is printer name"
+msgid "Printer: %1"
+msgstr "Imprimante : %1"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:557
+msgctxt "@action:button"
+msgid "Update profile with current settings/overrides"
+msgstr "Mettre à jour le profil à l'aide des paramètres / forçages actuels"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:583
+msgctxt "@action:label"
+msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
+msgstr "Ce profil utilise les paramètres par défaut spécifiés par l'imprimante, de sorte qu'aucun paramètre / forçage n'apparaît dans la liste ci-dessous."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:591
+msgctxt "@action:label"
+msgid "Your current settings match the selected profile."
+msgstr "Vos paramètres actuels correspondent au profil sélectionné."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:609
+msgctxt "@title:tab"
+msgid "Global Settings"
+msgstr "Paramètres généraux"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
+msgctxt "@title:tab"
+msgid "Setting Visibility"
+msgstr "Visibilité des paramètres"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
+msgctxt "@label:textbox"
+msgid "Check all"
+msgstr "Vérifier tout"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:450
+msgctxt "@title:tab"
+msgid "General"
+msgstr "Général"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:137
 msgctxt "@label"
 msgid "Interface"
 msgstr "Interface"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:216
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:216
 msgctxt "@label"
 msgid "Currency:"
 msgstr "Devise :"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:229
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:229
 msgctxt "@label"
 msgid "Theme:"
 msgstr "Thème :"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:285
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:285
 msgctxt "@label"
 msgid "You will need to restart the application for these changes to have effect."
 msgstr "Vous devez redémarrer l'application pour que ces changements prennent effet."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:302
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:302
 msgctxt "@info:tooltip"
 msgid "Slice automatically when changing settings."
 msgstr "Découper automatiquement si les paramètres sont modifiés."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:310
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:310
 msgctxt "@option:check"
 msgid "Slice automatically"
 msgstr "Découper automatiquement"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:324
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:324
 msgctxt "@label"
 msgid "Viewport behavior"
 msgstr "Comportement Viewport"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:332
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:332
 msgctxt "@info:tooltip"
 msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly."
 msgstr "Surligne les parties non supportées du modèle en rouge. Sans ajouter de support, ces zones ne s'imprimeront pas correctement."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:341
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:341
 msgctxt "@option:check"
 msgid "Display overhang"
 msgstr "Mettre en surbrillance les porte-à-faux"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:351
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:351
 msgctxt "@info:tooltip"
 msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry."
 msgstr "Surlignez les surfaces du modèle manquantes ou étrangères en utilisant les signes d'avertissement. Les Toolpaths seront souvent les parties manquantes de la géométrie prévue."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:360
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:360
 msgctxt "@option:check"
 msgid "Display model errors"
 msgstr "Afficher les erreurs du modèle"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:368
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:368
 msgctxt "@info:tooltip"
 msgid "Moves the camera so the model is in the center of the view when a model is selected"
 msgstr "Déplace la caméra afin que le modèle sélectionné se trouve au centre de la vue"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:373
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:373
 msgctxt "@action:button"
 msgid "Center camera when item is selected"
 msgstr "Centrer la caméra lorsqu'un élément est sélectionné"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:383
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:383
 msgctxt "@info:tooltip"
 msgid "Should the default zoom behavior of cura be inverted?"
 msgstr "Le comportement de zoom par défaut de Cura doit-il être inversé ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:388
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:388
 msgctxt "@action:button"
 msgid "Invert the direction of camera zoom."
 msgstr "Inverser la direction du zoom de la caméra."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:404
 msgctxt "@info:tooltip"
 msgid "Should zooming move in the direction of the mouse?"
 msgstr "Le zoom doit-il se faire dans la direction de la souris ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:404
 msgctxt "@info:tooltip"
 msgid "Zooming towards the mouse is not supported in the orthographic perspective."
 msgstr "Le zoom vers la souris n'est pas pris en charge dans la perspective orthographique."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:409
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:409
 msgctxt "@action:button"
 msgid "Zoom toward mouse direction"
 msgstr "Zoomer vers la direction de la souris"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:435
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:435
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved so that they no longer intersect?"
 msgstr "Les modèles dans la zone d'impression doivent-ils être déplacés afin de ne plus se croiser ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:440
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:440
 msgctxt "@option:check"
 msgid "Ensure models are kept apart"
 msgstr "Veillez à ce que les modèles restent séparés"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:449
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:449
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved down to touch the build plate?"
 msgstr "Les modèles dans la zone d'impression doivent-ils être abaissés afin de toucher le plateau ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:454
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:454
 msgctxt "@option:check"
 msgid "Automatically drop models to the build plate"
 msgstr "Abaisser automatiquement les modèles sur le plateau"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:466
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:466
 msgctxt "@info:tooltip"
 msgid "Show caution message in g-code reader."
 msgstr "Afficher le message d'avertissement dans le lecteur G-Code."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:475
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:475
 msgctxt "@option:check"
 msgid "Caution message in g-code reader"
 msgstr "Message d'avertissement dans le lecteur G-Code"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:483
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:483
 msgctxt "@info:tooltip"
 msgid "Should layer be forced into compatibility mode?"
 msgstr "La couche doit-elle être forcée en mode de compatibilité ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:488
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:488
 msgctxt "@option:check"
 msgid "Force layer view compatibility mode (restart required)"
 msgstr "Forcer l'affichage de la couche en mode de compatibilité (redémarrage requis)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:498
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:498
 msgctxt "@info:tooltip"
 msgid "Should Cura open at the location it was closed?"
 msgstr "Est-ce que Cura devrait ouvrir à l'endroit où il a été fermé ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:503
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:503
 msgctxt "@option:check"
 msgid "Restore window position on start"
 msgstr "Restaurer la position de la fenêtre au démarrage"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:513
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:513
 msgctxt "@info:tooltip"
 msgid "What type of camera rendering should be used?"
 msgstr "Quel type de rendu de la caméra doit-il être utilisé?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:520
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:520
 msgctxt "@window:text"
 msgid "Camera rendering:"
 msgstr "Rendu caméra :"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:531
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:531
 msgid "Perspective"
 msgstr "Perspective"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:532
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:532
 msgid "Orthographic"
 msgstr "Orthographique"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:563
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:563
 msgctxt "@label"
 msgid "Opening and saving files"
 msgstr "Ouvrir et enregistrer des fichiers"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:570
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:570
 msgctxt "@info:tooltip"
 msgid "Should opening files from the desktop or external applications open in the same instance of Cura?"
 msgstr "L'ouverture de fichiers à partir du bureau ou d'applications externes doit-elle se faire dans la même instance de Cura ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:575
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:575
 msgctxt "@option:check"
 msgid "Use a single instance of Cura"
 msgstr "Utiliser une seule instance de Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:585
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:585
 msgctxt "@info:tooltip"
 msgid "Should models be scaled to the build volume if they are too large?"
 msgstr "Les modèles doivent-ils être mis à l'échelle du volume d'impression s'ils sont trop grands ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:590
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:590
 msgctxt "@option:check"
 msgid "Scale large models"
 msgstr "Réduire la taille des modèles trop grands"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:600
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:600
 msgctxt "@info:tooltip"
 msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?"
 msgstr "Un modèle peut apparaître en tout petit si son unité est par exemple en mètres plutôt qu'en millimètres. Ces modèles doivent-ils être agrandis ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:605
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:605
 msgctxt "@option:check"
 msgid "Scale extremely small models"
 msgstr "Mettre à l'échelle les modèles extrêmement petits"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:615
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:615
 msgctxt "@info:tooltip"
 msgid "Should models be selected after they are loaded?"
 msgstr "Les modèles doivent-ils être sélectionnés après leur chargement ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:620
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:620
 msgctxt "@option:check"
 msgid "Select models when loaded"
 msgstr "Sélectionner les modèles lorsqu'ils sont chargés"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:630
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:630
 msgctxt "@info:tooltip"
 msgid "Should a prefix based on the printer name be added to the print job name automatically?"
 msgstr "Un préfixe basé sur le nom de l'imprimante doit-il être automatiquement ajouté au nom de la tâche d'impression ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:635
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:635
 msgctxt "@option:check"
 msgid "Add machine prefix to job name"
 msgstr "Ajouter le préfixe de la machine au nom de la tâche"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:645
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:645
 msgctxt "@info:tooltip"
 msgid "Should a summary be shown when saving a project file?"
 msgstr "Un résumé doit-il être affiché lors de l'enregistrement d'un fichier de projet ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:649
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:649
 msgctxt "@option:check"
 msgid "Show summary dialog when saving project"
 msgstr "Afficher la boîte de dialogue du résumé lors de l'enregistrement du projet"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:659
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:659
 msgctxt "@info:tooltip"
 msgid "Default behavior when opening a project file"
 msgstr "Comportement par défaut lors de l'ouverture d'un fichier de projet"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:667
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:667
 msgctxt "@window:text"
 msgid "Default behavior when opening a project file: "
 msgstr "Comportement par défaut lors de l'ouverture d'un fichier de projet : "
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:681
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:681
 msgctxt "@option:openProject"
 msgid "Always ask me this"
 msgstr "Toujours me demander"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:682
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:682
 msgctxt "@option:openProject"
 msgid "Always open as a project"
 msgstr "Toujours ouvrir comme projet"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:683
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:683
 msgctxt "@option:openProject"
 msgid "Always import models"
 msgstr "Toujours importer les modèles"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:719
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:719
 msgctxt "@info:tooltip"
 msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
 msgstr "Lorsque vous apportez des modifications à un profil puis passez à un autre profil, une boîte de dialogue apparaît, vous demandant si vous souhaitez conserver les modifications. Vous pouvez aussi choisir une option par défaut, et le dialogue ne s'affichera plus."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:728 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
-msgctxt "@label"
-msgid "Profiles"
-msgstr "Profils"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:733
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:733
 msgctxt "@window:text"
 msgid "Default behavior for changed setting values when switching to a different profile: "
 msgstr "Comportement par défaut pour les valeurs de paramètres modifiées lors du passage à un profil différent : "
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:748
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:748
 msgctxt "@option:discardOrKeep"
 msgid "Always discard changed settings"
 msgstr "Toujours rejeter les paramètres modifiés"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:749
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:749
 msgctxt "@option:discardOrKeep"
 msgid "Always transfer changed settings to new profile"
 msgstr "Toujours transférer les paramètres modifiés dans le nouveau profil"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:783
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:783
 msgctxt "@label"
 msgid "Privacy"
 msgstr "Confidentialité"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:790
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:790
 msgctxt "@info:tooltip"
 msgid "Should Cura check for updates when the program is started?"
 msgstr "Cura doit-il vérifier les mises à jour au démarrage du programme ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:795
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:795
 msgctxt "@option:check"
 msgid "Check for updates on start"
 msgstr "Vérifier les mises à jour au démarrage"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:805
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:805
 msgctxt "@info:tooltip"
 msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored."
 msgstr "Les données anonymes de votre impression doivent-elles être envoyées à Ultimaker ? Notez qu'aucun modèle, aucune adresse IP ni aucune autre information permettant de vous identifier personnellement ne seront envoyés ou stockés."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:810
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:810
 msgctxt "@option:check"
 msgid "Send (anonymous) print information"
 msgstr "Envoyer des informations (anonymes) sur l'impression"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:819
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:819
 msgctxt "@action:button"
 msgid "More information"
 msgstr "Plus d'informations"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:40 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:84
-msgctxt "@action:button"
-msgid "Activate"
-msgstr "Activer"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:63 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:152
-msgctxt "@action:button"
-msgid "Rename"
-msgstr "Renommer"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
-msgctxt "@action:button"
-msgid "Create"
-msgstr "Créer"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
-msgctxt "@action:button"
-msgid "Duplicate"
-msgstr "Dupliquer"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:167
-msgctxt "@action:button"
-msgid "Import"
-msgstr "Importer"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:179
-msgctxt "@action:button"
-msgid "Export"
-msgstr "Exporter"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
-msgctxt "@action:label"
-msgid "Printer"
-msgstr "Imprimante"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:274
-msgctxt "@title:window"
-msgid "Confirm Remove"
-msgstr "Confirmer la suppression"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:275
-msgctxt "@label (%1 is object name)"
-msgid "Are you sure you wish to remove %1? This cannot be undone!"
-msgstr "Êtes-vous sûr de vouloir supprimer l'objet %1 ? Vous ne pourrez pas revenir en arrière !"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
-msgctxt "@title:window"
-msgid "Import Material"
-msgstr "Importer un matériau"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
-msgstr "Impossible d'importer le matériau <filename>%1</filename> : <message>%2</message>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewsSelector.qml:50
+msgctxt "@label"
+msgid "View type"
+msgstr "Type d'affichage"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully imported material <filename>%1</filename>"
-msgstr "Matériau <filename>%1</filename> importé avec succès"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:119
+msgctxt "@label:MonitorStatus"
+msgid "Not connected to a printer"
+msgstr "Non connecté à une imprimante"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
-msgctxt "@title:window"
-msgid "Export Material"
-msgstr "Exporter un matériau"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:123
+msgctxt "@label:MonitorStatus"
+msgid "Printer does not accept commands"
+msgstr "L'imprimante n'accepte pas les commandes"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
-msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
-msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
-msgstr "Échec de l'exportation de matériau vers <filename>%1</filename> : <message>%2</message>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:133
+msgctxt "@label:MonitorStatus"
+msgid "In maintenance. Please check the printer"
+msgstr "En maintenance. Vérifiez l'imprimante"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully exported material to <filename>%1</filename>"
-msgstr "Matériau exporté avec succès vers <filename>%1</filename>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:144
+msgctxt "@label:MonitorStatus"
+msgid "Lost connection with the printer"
+msgstr "Connexion avec l'imprimante perdue"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
-msgctxt "@title"
-msgid "Information"
-msgstr "Informations"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:146
+msgctxt "@label:MonitorStatus"
+msgid "Printing..."
+msgstr "Impression..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
-msgctxt "@title:window"
-msgid "Confirm Diameter Change"
-msgstr "Confirmer le changement de diamètre"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:149
+msgctxt "@label:MonitorStatus"
+msgid "Paused"
+msgstr "En pause"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
-msgctxt "@label (%1 is a number)"
-msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
-msgstr "Le nouveau diamètre de filament est réglé sur %1 mm, ce qui n'est pas compatible avec l'extrudeuse actuelle. Souhaitez-vous poursuivre ?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:152
+msgctxt "@label:MonitorStatus"
+msgid "Preparing..."
+msgstr "Préparation..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
-msgctxt "@label"
-msgid "Display Name"
-msgstr "Afficher le nom"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:154
+msgctxt "@label:MonitorStatus"
+msgid "Please remove the print"
+msgstr "Supprimez l'imprimante"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:326
 msgctxt "@label"
-msgid "Material Type"
-msgstr "Type de matériau"
+msgid "Abort Print"
+msgstr "Abandonner l'impression"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:338
 msgctxt "@label"
-msgid "Color"
-msgstr "Couleur"
+msgid "Are you sure you want to abort the print?"
+msgstr "Êtes-vous sûr(e) de vouloir abandonner l'impression ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
-msgctxt "@label"
-msgid "Properties"
-msgstr "Propriétés"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:68
+msgctxt "@label:textbox"
+msgid "Search settings"
+msgstr "Paramètres de recherche"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
-msgctxt "@label"
-msgid "Density"
-msgstr "Densité"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:456
+msgctxt "@action:menu"
+msgid "Copy value to all extruders"
+msgstr "Copier la valeur vers tous les extrudeurs"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
-msgctxt "@label"
-msgid "Diameter"
-msgstr "Diamètre"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:465
+msgctxt "@action:menu"
+msgid "Copy all changed values to all extruders"
+msgstr "Copier toutes les valeurs modifiées vers toutes les extrudeuses"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
-msgctxt "@label"
-msgid "Filament Cost"
-msgstr "Coût du filament"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:502
+msgctxt "@action:menu"
+msgid "Hide this setting"
+msgstr "Masquer ce paramètre"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
-msgctxt "@label"
-msgid "Filament weight"
-msgstr "Poids du filament"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:515
+msgctxt "@action:menu"
+msgid "Don't show this setting"
+msgstr "Masquer ce paramètre"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
-msgctxt "@label"
-msgid "Filament length"
-msgstr "Longueur du filament"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:519
+msgctxt "@action:menu"
+msgid "Keep this setting visible"
+msgstr "Afficher ce paramètre"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingCategory.qml:200
 msgctxt "@label"
-msgid "Cost per Meter"
-msgstr "Coût au mètre"
+msgid ""
+"Some hidden settings use values different from their normal calculated value.\n"
+"\n"
+"Click to make these settings visible."
+msgstr ""
+"Certains paramètres masqués utilisent des valeurs différentes de leur valeur normalement calculée.\n"
+"\n"
+"Cliquez pour rendre ces paramètres visibles."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:81
 msgctxt "@label"
-msgid "This material is linked to %1 and shares some of its properties."
-msgstr "Ce matériau est lié à %1 et partage certaines de ses propriétés."
+msgid "This setting is not used because all the settings that it influences are overridden."
+msgstr "Ce paramètre n'est pas utilisé car tous les paramètres qu'il influence sont remplacés."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
-msgctxt "@label"
-msgid "Unlink Material"
-msgstr "Délier le matériau"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:86
+msgctxt "@label Header for list of settings."
+msgid "Affects"
+msgstr "Touche"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
-msgctxt "@label"
-msgid "Description"
-msgstr "Description"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:91
+msgctxt "@label Header for list of settings."
+msgid "Affected By"
+msgstr "Touché par"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:187
 msgctxt "@label"
-msgid "Adhesion Information"
-msgstr "Informations d'adhérence"
+msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
+msgstr "Ce paramètre est toujours partagé par toutes les extrudeuses. Le modifier ici entraînera la modification de la valeur pour toutes les extrudeuses."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:191
 msgctxt "@label"
-msgid "Print settings"
-msgstr "Paramètres d'impression"
+msgid "This setting is resolved from conflicting extruder-specific values:"
+msgstr "Ce paramètre est résolu à partir de valeurs conflictuelles spécifiques à l'extrudeur :"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:230
 msgctxt "@label"
-msgid "Create"
-msgstr "Créer"
+msgid ""
+"This setting has a value that is different from the profile.\n"
+"\n"
+"Click to restore the value of the profile."
+msgstr ""
+"Ce paramètre possède une valeur qui est différente du profil.\n"
+"\n"
+"Cliquez pour restaurer la valeur du profil."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:329
 msgctxt "@label"
-msgid "Duplicate"
-msgstr "Dupliquer"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:202
-msgctxt "@title:window"
-msgid "Create Profile"
-msgstr "Créer un profil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:204
-msgctxt "@info"
-msgid "Please provide a name for this profile."
-msgstr "Veuillez fournir un nom pour ce profil."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:260
-msgctxt "@title:window"
-msgid "Duplicate Profile"
-msgstr "Dupliquer un profil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:291
-msgctxt "@title:window"
-msgid "Rename Profile"
-msgstr "Renommer le profil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:304
-msgctxt "@title:window"
-msgid "Import Profile"
-msgstr "Importer un profil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:333
-msgctxt "@title:window"
-msgid "Export Profile"
-msgstr "Exporter un profil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:396
-msgctxt "@label %1 is printer name"
-msgid "Printer: %1"
-msgstr "Imprimante : %1"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:554
-msgctxt "@action:button"
-msgid "Update profile with current settings/overrides"
-msgstr "Mettre à jour le profil à l'aide des paramètres / forçages actuels"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:561 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
-msgctxt "@action:button"
-msgid "Discard current changes"
-msgstr "Ignorer les modifications actuelles"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:580
-msgctxt "@action:label"
-msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
-msgstr "Ce profil utilise les paramètres par défaut spécifiés par l'imprimante, de sorte qu'aucun paramètre / forçage n'apparaît dans la liste ci-dessous."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:588
-msgctxt "@action:label"
-msgid "Your current settings match the selected profile."
-msgstr "Vos paramètres actuels correspondent au profil sélectionné."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:606
-msgctxt "@title:tab"
-msgid "Global Settings"
-msgstr "Paramètres généraux"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:61
-msgctxt "@info:status"
-msgid "Calculated"
-msgstr "Calculer"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:75
-msgctxt "@title:column"
-msgid "Setting"
-msgstr "Paramètre"
+msgid ""
+"This setting is normally calculated, but it currently has an absolute value set.\n"
+"\n"
+"Click to restore the calculated value."
+msgstr ""
+"Ce paramètre est normalement calculé mais il possède actuellement une valeur absolue définie.\n"
+"\n"
+"Cliquez pour restaurer la valeur calculée."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:82
-msgctxt "@title:column"
-msgid "Profile"
-msgstr "Profil"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:27
+msgctxt "@info:tooltip"
+msgid "3D View"
+msgstr "Vue 3D"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:89
-msgctxt "@title:column"
-msgid "Current"
-msgstr "Actuel"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:40
+msgctxt "@info:tooltip"
+msgid "Front View"
+msgstr "Vue de face"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:97
-msgctxt "@title:column"
-msgid "Unit"
-msgstr "Unité"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:53
+msgctxt "@info:tooltip"
+msgid "Top View"
+msgstr "Vue du dessus"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
-msgctxt "@title:tab"
-msgid "Setting Visibility"
-msgstr "Visibilité des paramètres"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:66
+msgctxt "@info:tooltip"
+msgid "Left View"
+msgstr "Vue gauche"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
-msgctxt "@label:textbox"
-msgid "Check all"
-msgstr "Vérifier tout"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:79
+msgctxt "@info:tooltip"
+msgid "Right View"
+msgstr "Vue droite"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
 msgctxt "@label"
 msgid "Extruder"
 msgstr "Extrudeuse"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
 msgctxt "@tooltip"
 msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
 msgstr "Température cible de l'extrémité chauffante. L'extrémité chauffante sera chauffée ou refroidie pour tendre vers cette température. Si la valeur est 0, le chauffage de l'extrémité chauffante sera coupé."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
 msgctxt "@tooltip"
 msgid "The current temperature of this hotend."
 msgstr "Température actuelle de cette extrémité chauffante."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
 msgctxt "@tooltip of temperature input"
 msgid "The temperature to pre-heat the hotend to."
 msgstr "Température jusqu'à laquelle préchauffer l'extrémité chauffante."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
 msgctxt "@button Cancel pre-heating"
 msgid "Cancel"
 msgstr "Annuler"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
 msgctxt "@button"
 msgid "Pre-heat"
 msgstr "Préchauffer"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
 msgctxt "@tooltip of pre-heat"
 msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
 msgstr "Préchauffez l'extrémité chauffante avant l'impression. Vous pouvez continuer l'ajustement de votre impression pendant qu'elle chauffe, ce qui vous évitera un temps d'attente lorsque vous serez prêt à lancer l'impression."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
 msgctxt "@tooltip"
 msgid "The colour of the material in this extruder."
 msgstr "Couleur du matériau dans cet extrudeur."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
 msgctxt "@tooltip"
 msgid "The material in this extruder."
 msgstr "Matériau dans cet extrudeur."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
 msgctxt "@tooltip"
 msgid "The nozzle inserted in this extruder."
 msgstr "Buse insérée dans cet extrudeur."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
 msgctxt "@label"
 msgid "Build plate"
 msgstr "Plateau"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
 msgctxt "@tooltip"
 msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
 msgstr "Température cible du plateau chauffant. Le plateau sera chauffé ou refroidi pour tendre vers cette température. Si la valeur est 0, le chauffage du plateau sera éteint."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
 msgctxt "@tooltip"
 msgid "The current temperature of the heated bed."
 msgstr "Température actuelle du plateau chauffant."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
 msgctxt "@tooltip of temperature input"
 msgid "The temperature to pre-heat the bed to."
 msgstr "Température jusqu'à laquelle préchauffer le plateau."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
 msgctxt "@tooltip of pre-heat"
 msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
 msgstr "Préchauffez le plateau avant l'impression. Vous pouvez continuer à ajuster votre impression pendant qu'il chauffe, et vous n'aurez pas à attendre que le plateau chauffe lorsque vous serez prêt à lancer l'impression."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
 msgctxt "@label"
 msgid "Printer control"
 msgstr "Contrôle de l'imprimante"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
 msgctxt "@label"
 msgid "Jog Position"
 msgstr "Position de coupe"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
 msgctxt "@label"
 msgid "X/Y"
 msgstr "X/Y"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
 msgctxt "@label"
 msgid "Z"
 msgstr "Z"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
 msgctxt "@label"
 msgid "Jog Distance"
 msgstr "Distance de coupe"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
 msgctxt "@label"
 msgid "Send G-code"
 msgstr "Envoyer G-Code"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
 msgctxt "@tooltip of G-code command input"
 msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
 msgstr "Envoyer une commande G-Code personnalisée à l'imprimante connectée. Appuyez sur « Entrée » pour envoyer la commande."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
 msgctxt "@info:status"
 msgid "The printer is not connected."
 msgstr "L'imprimante n'est pas connectée."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
-msgctxt "@status"
-msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
-msgstr "L'imprimante cloud est hors ligne. Veuillez vérifier si l'imprimante est activée et connectée à Internet."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
-msgctxt "@status"
-msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
-msgstr "Cette imprimante n'est pas associée à votre compte. Veuillez visiter l'Ultimaker Digital Factory pour établir une connexion."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
-msgstr "La connexion cloud est actuellement indisponible. Veuillez vous connecter pour connecter l'imprimante cloud."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please check your internet connection."
-msgstr "La connexion cloud est actuellement indisponible. Veuillez vérifier votre connexion Internet."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:238
-msgctxt "@button"
-msgid "Add printer"
-msgstr "Ajouter une imprimante"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:255
-msgctxt "@button"
-msgid "Manage printers"
-msgstr "Gérer les imprimantes"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
-msgctxt "@label"
-msgid "Connected printers"
-msgstr "Imprimantes connectées"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
-msgctxt "@label"
-msgid "Preset printers"
-msgstr "Imprimantes préréglées"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:140
-msgctxt "@label"
-msgid "Active print"
-msgstr "Activer l'impression"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:148
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:114
 msgctxt "@label"
-msgid "Job Name"
-msgstr "Nom de la tâche"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:156
-msgctxt "@label"
-msgid "Printing Time"
-msgstr "Durée d'impression"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:164
-msgctxt "@label"
-msgid "Estimated time left"
-msgstr "Durée restante estimée"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
-msgctxt "@label"
-msgid "Profile"
-msgstr "Profil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
-msgctxt "@tooltip"
-msgid ""
-"Some setting/override values are different from the values stored in the profile.\n"
-"\n"
-"Click to open the profile manager."
-msgstr ""
-"Certaines valeurs de paramètre / forçage sont différentes des valeurs enregistrées dans le profil. \n"
-"\n"
-"Cliquez pour ouvrir le gestionnaire de profils."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
-msgctxt "@label:header"
-msgid "Custom profiles"
-msgstr "Personnaliser les profils"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
-msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
-msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
-msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
-msgstr[0] "Il n'y a pas de profil %1 pour la configuration dans l'extrudeur %2. L'intention par défaut sera utilisée à la place"
-msgstr[1] "Il n'y a pas de profil %1 pour les configurations dans les extrudeurs %2. L'intention par défaut sera utilisée à la place"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
-msgctxt "@label shown when we load a Gcode file"
-msgid "Print setup disabled. G-code file can not be modified."
-msgstr "Configuration d'impression désactivée. Le fichier G-Code ne peut pas être modifié."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
-msgctxt "@button"
-msgid "Recommended"
-msgstr "Recommandé"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
-msgctxt "@button"
-msgid "Custom"
-msgstr "Personnalisé"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
-msgctxt "@label:Should be short"
-msgid "On"
-msgstr "On"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
-msgctxt "@label:Should be short"
-msgid "Off"
-msgstr "Off"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
-msgctxt "@label"
-msgid "Experimental"
-msgstr "Expérimental"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
-msgctxt "@label"
-msgid "Adhesion"
-msgstr "Adhérence"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
-msgctxt "@label"
-msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
-msgstr "Activez l'impression d'une bordure ou plaquette (Brim/Raft). Cela ajoutera une zone plate autour de ou sous votre objet qui est facile à découper par la suite."
+msgid "Is printed as support."
+msgstr "Est imprimé comme support."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:117
 msgctxt "@label"
-msgid "Gradual infill"
-msgstr "Remplissage graduel"
+msgid "Other models overlapping with this model are modified."
+msgstr "D'autres modèles qui se chevauchent avec ce modèle ont été modifiés."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:120
 msgctxt "@label"
-msgid "Gradual infill will gradually increase the amount of infill towards the top."
-msgstr "Un remplissage graduel augmentera la quantité de remplissage vers le haut."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
-msgctxt "@tooltip"
-msgid "You have modified some profile settings. If you want to change these go to custom mode."
-msgstr "Vous avez modifié certains paramètres du profil. Si vous souhaitez les modifier, allez dans le mode Personnaliser."
+msgid "Infill overlapping with this model is modified."
+msgstr "Le chevauchement de remplissage avec ce modèle a été modifié."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:123
 msgctxt "@label"
-msgid "Support"
-msgstr "Support"
+msgid "Overlaps with this model are not supported."
+msgstr "Les chevauchements avec ce modèle ne sont pas pris en charge."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
-msgctxt "@label"
-msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
-msgstr "Générer des structures pour soutenir les parties du modèle qui possèdent des porte-à-faux. Sans ces structures, ces parties s'effondreront durant l'impression."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:130
+msgctxt "@label %1 is the number of settings it overrides."
+msgid "Overrides %1 setting."
+msgid_plural "Overrides %1 settings."
+msgstr[0] "Remplace le paramètre %1."
+msgstr[1] "Remplace les paramètres %1."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingCategory.qml:200
-msgctxt "@label"
-msgid ""
-"Some hidden settings use values different from their normal calculated value.\n"
-"\n"
-"Click to make these settings visible."
-msgstr ""
-"Certains paramètres masqués utilisent des valeurs différentes de leur valeur normalement calculée.\n"
-"\n"
-"Cliquez pour rendre ces paramètres visibles."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
+msgctxt "@action:button"
+msgid "Marketplace"
+msgstr "Marché en ligne"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:81
-msgctxt "@label"
-msgid "This setting is not used because all the settings that it influences are overridden."
-msgstr "Ce paramètre n'est pas utilisé car tous les paramètres qu'il influence sont remplacés."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Edit"
+msgstr "&Modifier"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:86
-msgctxt "@label Header for list of settings."
-msgid "Affects"
-msgstr "Touche"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:56
+msgctxt "@title:menu menubar:toplevel"
+msgid "E&xtensions"
+msgstr "E&xtensions"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:91
-msgctxt "@label Header for list of settings."
-msgid "Affected By"
-msgstr "Touché par"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:94
+msgctxt "@title:menu menubar:toplevel"
+msgid "P&references"
+msgstr "P&références"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:187
-msgctxt "@label"
-msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
-msgstr "Ce paramètre est toujours partagé par toutes les extrudeuses. Le modifier ici entraînera la modification de la valeur pour toutes les extrudeuses."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:102
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Help"
+msgstr "&Aide"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:191
-msgctxt "@label"
-msgid "This setting is resolved from conflicting extruder-specific values:"
-msgstr "Ce paramètre est résolu à partir de valeurs conflictuelles spécifiques à l'extrudeur :"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148
+msgctxt "@title:window"
+msgid "New project"
+msgstr "Nouveau projet"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:230
-msgctxt "@label"
-msgid ""
-"This setting has a value that is different from the profile.\n"
-"\n"
-"Click to restore the value of the profile."
-msgstr ""
-"Ce paramètre possède une valeur qui est différente du profil.\n"
-"\n"
-"Cliquez pour restaurer la valeur du profil."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:149
+msgctxt "@info:question"
+msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
+msgstr "Êtes-vous sûr(e) de souhaiter lancer un nouveau projet ? Cela supprimera les objets du plateau ainsi que tous paramètres non enregistrés."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:329
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:257
 msgctxt "@label"
-msgid ""
-"This setting is normally calculated, but it currently has an absolute value set.\n"
-"\n"
-"Click to restore the calculated value."
-msgstr ""
-"Ce paramètre est normalement calculé mais il possède actuellement une valeur absolue définie.\n"
-"\n"
-"Cliquez pour restaurer la valeur calculée."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:68
-msgctxt "@label:textbox"
-msgid "Search settings"
-msgstr "Paramètres de recherche"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:456
-msgctxt "@action:menu"
-msgid "Copy value to all extruders"
-msgstr "Copier la valeur vers tous les extrudeurs"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:465
-msgctxt "@action:menu"
-msgid "Copy all changed values to all extruders"
-msgstr "Copier toutes les valeurs modifiées vers toutes les extrudeuses"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:502
-msgctxt "@action:menu"
-msgid "Hide this setting"
-msgstr "Masquer ce paramètre"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:515
-msgctxt "@action:menu"
-msgid "Don't show this setting"
-msgstr "Masquer ce paramètre"
+msgid "This package will be installed after restarting."
+msgstr "Ce paquet sera installé après le redémarrage."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:519
-msgctxt "@action:menu"
-msgid "Keep this setting visible"
-msgstr "Afficher ce paramètre"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:453
+msgctxt "@title:tab"
+msgid "Settings"
+msgstr "Paramètres"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:27
-msgctxt "@info:tooltip"
-msgid "3D View"
-msgstr "Vue 3D"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:576
+msgctxt "@title:window %1 is the application name"
+msgid "Closing %1"
+msgstr "Fermeture de %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:40
-msgctxt "@info:tooltip"
-msgid "Front View"
-msgstr "Vue de face"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:577
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:589
+msgctxt "@label %1 is the application name"
+msgid "Are you sure you want to exit %1?"
+msgstr "Voulez-vous vraiment quitter %1 ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:53
-msgctxt "@info:tooltip"
-msgid "Top View"
-msgstr "Vue du dessus"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:737
+msgctxt "@window:title"
+msgid "Install Package"
+msgstr "Installer le paquet"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:66
-msgctxt "@info:tooltip"
-msgid "Left View"
-msgstr "Vue gauche"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:745
+msgctxt "@title:window"
+msgid "Open File(s)"
+msgstr "Ouvrir le(s) fichier(s)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:79
-msgctxt "@info:tooltip"
-msgid "Right View"
-msgstr "Vue droite"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:748
+msgctxt "@text:window"
+msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
+msgstr "Nous avons trouvé au moins un fichier G-Code parmi les fichiers que vous avez sélectionné. Vous ne pouvez ouvrir qu'un seul fichier G-Code à la fois. Si vous souhaitez ouvrir un fichier G-Code, veuillez ne sélectionner qu'un seul fichier de ce type."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewsSelector.qml:50
-msgctxt "@label"
-msgid "View type"
-msgstr "Type d'affichage"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:857
+msgctxt "@title:window"
+msgid "Add Printer"
+msgstr "Ajouter une imprimante"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
-msgctxt "@label"
-msgid "Add a Cloud printer"
-msgstr "Ajouter une imprimante cloud"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:865
+msgctxt "@title:window"
+msgid "What's New"
+msgstr "Quoi de neuf"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
-msgctxt "@label"
-msgid "Waiting for Cloud response"
-msgstr "En attente d'une réponse cloud"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
+msgctxt "@status"
+msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
+msgstr "L'imprimante cloud est hors ligne. Veuillez vérifier si l'imprimante est activée et connectée à Internet."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
-msgctxt "@label"
-msgid "No printers found in your account?"
-msgstr "Aucune imprimante trouvée dans votre compte ?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
+msgctxt "@status"
+msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
+msgstr "Cette imprimante n'est pas associée à votre compte. Veuillez visiter l'Ultimaker Digital Factory pour établir une connexion."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
-msgctxt "@label"
-msgid "The following printers in your account have been added in Cura:"
-msgstr "Les imprimantes suivantes de votre compte ont été ajoutées à Cura :"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
+msgstr "La connexion cloud est actuellement indisponible. Veuillez vous connecter pour connecter l'imprimante cloud."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
-msgctxt "@button"
-msgid "Add printer manually"
-msgstr "Ajouter l'imprimante manuellement"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please check your internet connection."
+msgstr "La connexion cloud est actuellement indisponible. Veuillez vérifier votre connexion Internet."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:218
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:238
 msgctxt "@button"
-msgid "Finish"
-msgstr "Fin"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:230
-msgctxt "@label"
-msgid "Manufacturer"
-msgstr "Fabricant"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:247
-msgctxt "@label"
-msgid "Profile author"
-msgstr "Auteur du profil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:265
-msgctxt "@label"
-msgid "Printer name"
-msgstr "Nom de l'imprimante"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
-msgctxt "@text"
-msgid "Please name your printer"
-msgstr "Veuillez nommer votre imprimante"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
-msgctxt "@label"
-msgid "Add a printer"
+msgid "Add printer"
 msgstr "Ajouter une imprimante"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
-msgctxt "@label"
-msgid "Add a networked printer"
-msgstr "Ajouter une imprimante en réseau"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
-msgctxt "@label"
-msgid "Add a non-networked printer"
-msgstr "Ajouter une imprimante hors réseau"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
-msgctxt "@label"
-msgid "There is no printer found over your network."
-msgstr "Aucune imprimante n'a été trouvée sur votre réseau."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:255
+msgctxt "@button"
+msgid "Manage printers"
+msgstr "Gérer les imprimantes"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
 msgctxt "@label"
-msgid "Refresh"
-msgstr "Rafraîchir"
+msgid "Connected printers"
+msgstr "Imprimantes connectées"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
 msgctxt "@label"
-msgid "Add printer by IP"
-msgstr "Ajouter une imprimante par IP"
+msgid "Preset printers"
+msgstr "Imprimantes préréglées"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
-msgctxt "@label"
-msgid "Add cloud printer"
-msgstr "Ajouter une imprimante cloud"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ExtruderButton.qml:16
+msgctxt "@label %1 is filled in with the name of an extruder"
+msgid "Print Selected Model with %1"
+msgid_plural "Print Selected Models with %1"
+msgstr[0] "Imprimer le modèle sélectionné avec %1"
+msgstr[1] "Imprimer les modèles sélectionnés avec %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:240
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
 msgctxt "@label"
-msgid "Troubleshooting"
-msgstr "Dépannage"
+msgid "Time estimation"
+msgstr "Estimation de durée"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
 msgctxt "@label"
-msgid "Add printer by IP address"
-msgstr "Ajouter une imprimante par adresse IP"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
-msgctxt "@text"
-msgid "Enter your printer's IP address."
-msgstr "Saisissez l'adresse IP de votre imprimante."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
-msgctxt "@button"
-msgid "Add"
-msgstr "Ajouter"
+msgid "Material estimation"
+msgstr "Estimation du matériau"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
-msgctxt "@label"
-msgid "Could not connect to device."
-msgstr "Impossible de se connecter à l'appareil."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
+msgctxt "@label m for meter"
+msgid "%1m"
+msgstr "%1m"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
-msgctxt "@label"
-msgid "Can't connect to your Ultimaker printer?"
-msgstr "Impossible de vous connecter à votre imprimante Ultimaker ?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
+msgctxt "@label g for grams"
+msgid "%1g"
+msgstr "%1g"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
-msgctxt "@label"
-msgid "The printer at this address has not responded yet."
-msgstr "L'imprimante à cette adresse n'a pas encore répondu."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
+msgctxt "@label:PrintjobStatus"
+msgid "Slicing..."
+msgstr "Découpe en cours..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
-msgctxt "@label"
-msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
-msgstr "Cette imprimante ne peut pas être ajoutée parce qu'il s'agit d'une imprimante inconnue ou de l'hôte d'un groupe."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
+msgctxt "@label:PrintjobStatus"
+msgid "Unable to slice"
+msgstr "Impossible de découper"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
 msgctxt "@button"
-msgid "Back"
-msgstr "Précédent"
+msgid "Processing"
+msgstr "Traitement"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
 msgctxt "@button"
-msgid "Connect"
-msgstr "Se connecter"
+msgid "Slice"
+msgstr "Découper"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:43
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
 msgctxt "@label"
-msgid "Ultimaker Account"
-msgstr "Compte Ultimaker"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:84
-msgctxt "@text"
-msgid "Your key to connected 3D printing"
-msgstr "Votre clé pour une impression 3D connectée"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:101
-msgctxt "@text"
-msgid "- Customize your experience with more print profiles and plugins"
-msgstr "- Personnalisez votre expérience avec plus de profils d'impression et de plug-ins"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:104
-msgctxt "@text"
-msgid "- Stay flexible by syncing your setup and loading it anywhere"
-msgstr "- Restez flexible en synchronisant votre configuration et en la chargeant n'importe où"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:107
-msgctxt "@text"
-msgid "- Increase efficiency with a remote workflow on Ultimaker printers"
-msgstr "- Augmentez l'efficacité avec un flux de travail à distance sur les imprimantes Ultimaker"
+msgid "Start the slicing process"
+msgstr "Démarrer le processus de découpe"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:157
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
 msgctxt "@button"
-msgid "Skip"
-msgstr "Ignorer"
+msgid "Cancel"
+msgstr "Annuler"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
 msgctxt "@label"
-msgid "Help us to improve Ultimaker Cura"
-msgstr "Aidez-nous à améliorer Ultimaker Cura"
+msgid "No time estimation available"
+msgstr "Aucune estimation de la durée n'est disponible"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
-msgctxt "@text"
-msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
-msgstr "Ultimaker Cura recueille des données anonymes pour améliorer la qualité d'impression et l'expérience utilisateur, notamment :"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+msgctxt "@label"
+msgid "No cost estimation available"
+msgstr "Aucune estimation des coûts n'est disponible"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
-msgctxt "@text"
-msgid "Machine types"
-msgstr "Types de machines"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+msgctxt "@button"
+msgid "Preview"
+msgstr "Aperçu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
-msgctxt "@text"
-msgid "Material usage"
-msgstr "Utilisation du matériau"
+#: RemovableDriveOutputDevice/plugin.json
+msgctxt "description"
+msgid "Provides removable drive hotplugging and writing support."
+msgstr "Permet le branchement hot-plug et l'écriture sur lecteur amovible."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
-msgctxt "@text"
-msgid "Number of slices"
-msgstr "Nombre de découpes"
+#: RemovableDriveOutputDevice/plugin.json
+msgctxt "name"
+msgid "Removable Drive Output Device Plugin"
+msgstr "Plugin de périphérique de sortie sur disque amovible"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
-msgctxt "@text"
-msgid "Print settings"
-msgstr "Paramètres d'impression"
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
+msgstr "Configurations des mises à niveau de Cura 3.5 vers Cura 4.0."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
-msgctxt "@text"
-msgid "Data collected by Ultimaker Cura will not contain any personal information."
-msgstr "Les données recueillies par Ultimaker Cura ne contiendront aucun renseignement personnel."
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 3.5 to 4.0"
+msgstr "Mise à niveau de 3.5 vers 4.0"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
-msgctxt "@text"
-msgid "More information"
-msgstr "Plus d'informations"
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
+msgstr "Mises à niveau des configurations de Cura 4.6.2 vers Cura 4.7."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
-msgctxt "@label"
-msgid "Empty"
-msgstr "Vide"
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.6.2 to 4.7"
+msgstr "Mise à niveau de 4.6.2 vers 4.7"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
-msgctxt "@label"
-msgid "User Agreement"
-msgstr "Accord utilisateur"
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
+msgstr "Configurations des mises à niveau de Cura 2.2 vers Cura 2.4."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
-msgctxt "@button"
-msgid "Decline and close"
-msgstr "Décliner et fermer"
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 2.2 to 2.4"
+msgstr "Mise à niveau de 2.2 vers 2.4"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:29
-msgctxt "@label"
-msgid "Welcome to Ultimaker Cura"
-msgstr "Bienvenue dans Ultimaker Cura"
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
+msgstr "Configurations des mises à jour de Cura 4.2 vers Cura 4.3."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:47
-msgctxt "@text"
-msgid ""
-"Please follow these steps to set up\n"
-"Ultimaker Cura. This will only take a few moments."
-msgstr ""
-"Veuillez suivre ces étapes pour configurer\n"
-"Ultimaker Cura. Cela ne prendra que quelques instants."
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.2 to 4.3"
+msgstr "Mise à jour de 4.2 vers 4.3"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:58
-msgctxt "@button"
-msgid "Get started"
-msgstr "Prise en main"
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
+msgstr "Mises à niveau des configurations de Cura 4.6.0 vers Cura 4.6.2."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:24
-msgctxt "@label"
-msgid "What's new in Ultimaker Cura"
-msgstr "Quoi de neuf dans Ultimaker Cura"
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.6.0 to 4.6.2"
+msgstr "Mise à niveau de 4.6.0 vers 4.6.2"
 
-#: ModelChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "description"
-msgid "Checks models and print configuration for possible printing issues and give suggestions."
-msgstr "Vérifie les modèles et la configuration de l'impression pour déceler d'éventuels problèmes d'impression et donne des suggestions."
+msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
+msgstr "Met à niveau les configurations, de Cura 3.0 vers Cura 3.1."
 
-#: ModelChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "name"
-msgid "Model Checker"
-msgstr "Contrôleur de modèle"
+msgid "Version Upgrade 3.0 to 3.1"
+msgstr "Mise à niveau de version, de 3.0 vers 3.1"
 
-#: 3MFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "description"
-msgid "Provides support for reading 3MF files."
-msgstr "Fournit la prise en charge de la lecture de fichiers 3MF."
+msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
+msgstr "Configurations des mises à niveau de Cura 4.0 vers Cura 4.1."
 
-#: 3MFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "name"
-msgid "3MF Reader"
-msgstr "Lecteur 3MF"
+msgid "Version Upgrade 4.0 to 4.1"
+msgstr "Mise à niveau de 4.0 vers 4.1"
 
-#: 3MFWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "description"
-msgid "Provides support for writing 3MF files."
-msgstr "Permet l'écriture de fichiers 3MF."
+msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
+msgstr "Configurations des mises à niveau de Cura 2.6 vers Cura 2.7."
 
-#: 3MFWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "name"
-msgid "3MF Writer"
-msgstr "Générateur 3MF"
+msgid "Version Upgrade 2.6 to 2.7"
+msgstr "Mise à niveau de 2.6 vers 2.7"
 
-#: AMFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "description"
-msgid "Provides support for reading AMF files."
-msgstr "Fournit la prise en charge de la lecture de fichiers AMF."
+msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
+msgstr "Configurations des mises à niveau de Cura 2.5 vers Cura 2.6."
 
-#: AMFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "name"
-msgid "AMF Reader"
-msgstr "Lecteur AMF"
+msgid "Version Upgrade 2.5 to 2.6"
+msgstr "Mise à niveau de 2.5 vers 2.6"
 
-#: CuraDrive/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "description"
-msgid "Backup and restore your configuration."
-msgstr "Sauvegardez et restaurez votre configuration."
+msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
+msgstr "Configurations des mises à jour de Cura 4.1 vers Cura 4.2."
 
-#: CuraDrive/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "name"
-msgid "Cura Backups"
-msgstr "Sauvegardes Cura"
+msgid "Version Upgrade 4.1 to 4.2"
+msgstr "Mise à jour de 4.1 vers 4.2"
 
-#: CuraEngineBackend/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "description"
-msgid "Provides the link to the CuraEngine slicing backend."
-msgstr "Fournit le lien vers l'arrière du système de découpage CuraEngine."
+msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
+msgstr "Configurations des mises à niveau de Cura 2.1 vers Cura 2.2."
 
-#: CuraEngineBackend/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "name"
-msgid "CuraEngine Backend"
-msgstr "Système CuraEngine"
+msgid "Version Upgrade 2.1 to 2.2"
+msgstr "Mise à niveau vers 2.1 vers 2.2"
 
-#: CuraProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "description"
-msgid "Provides support for importing Cura profiles."
-msgstr "Fournit la prise en charge de l'importation de profils Cura."
+msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
+msgstr "Configurations des mises à niveau de Cura 3.2 vers Cura 3.3."
 
-#: CuraProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "name"
-msgid "Cura Profile Reader"
-msgstr "Lecteur de profil Cura"
+msgid "Version Upgrade 3.2 to 3.3"
+msgstr "Mise à niveau de 3.2 vers 3.3"
 
-#: CuraProfileWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "description"
-msgid "Provides support for exporting Cura profiles."
-msgstr "Fournit la prise en charge de l'exportation de profils Cura."
+msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
+msgstr "Mises à niveau des configurations de Cura 4.5 vers Cura 4.6."
 
-#: CuraProfileWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "name"
-msgid "Cura Profile Writer"
-msgstr "Générateur de profil Cura"
+msgid "Version Upgrade 4.5 to 4.6"
+msgstr "Mise à niveau de 4.5 vers 4.6"
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "description"
-msgid "Checks for firmware updates."
-msgstr "Vérifie les mises à jour du firmware."
+msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
+msgstr "Configurations des mises à niveau de Cura 4.4 vers Cura 4.5."
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "name"
-msgid "Firmware Update Checker"
-msgstr "Vérificateur des mises à jour du firmware"
+msgid "Version Upgrade 4.4 to 4.5"
+msgstr "Mise à niveau de 4.4 vers 4.5"
 
-#: FirmwareUpdater/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
-msgid "Provides a machine actions for updating firmware."
-msgstr "Fournit à une machine des actions permettant la mise à jour du firmware."
+msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
+msgstr "Mises à niveau des configurations de Cura 4.7 vers Cura 4.8."
 
-#: FirmwareUpdater/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
-msgid "Firmware Updater"
-msgstr "Programme de mise à jour du firmware"
+msgid "Version Upgrade 4.7 to 4.8"
+msgstr "Mise à niveau de 4.7 vers 4.8"
 
-#: GCodeGzReader/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "description"
-msgid "Reads g-code from a compressed archive."
-msgstr "Lit le G-Code à partir d'une archive compressée."
+msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
+msgstr "Configurations des mises à niveau de Cura 3.3 vers Cura 3.4."
 
-#: GCodeGzReader/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Reader"
-msgstr "Lecteur G-Code compressé"
+msgid "Version Upgrade 3.3 to 3.4"
+msgstr "Mise à niveau de 3.3 vers 3.4"
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a compressed archive."
-msgstr "Enregistre le G-Code dans une archive compressée."
+msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
+msgstr "Configurations des mises à niveau de Cura 4.3 vers Cura 4.4."
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Writer"
-msgstr "Générateur de G-Code compressé"
+msgid "Version Upgrade 4.3 to 4.4"
+msgstr "Mise à niveau de 4.3 vers 4.4"
 
-#: GCodeProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from g-code files."
-msgstr "Fournit la prise en charge de l'importation de profils à partir de fichiers g-code."
+msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
+msgstr "Configurations des mises à niveau de Cura 3.4 vers Cura 3.5."
 
-#: GCodeProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "name"
-msgid "G-code Profile Reader"
-msgstr "Lecteur de profil G-Code"
+msgid "Version Upgrade 3.4 to 3.5"
+msgstr "Mise à niveau de 3.4 vers 3.5"
 
-#: GCodeReader/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "description"
-msgid "Allows loading and displaying G-code files."
-msgstr "Permet le chargement et l'affichage de fichiers G-Code."
+msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
+msgstr "Met à niveau les configurations, de Cura 2.7 vers Cura 3.0."
 
-#: GCodeReader/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "name"
-msgid "G-code Reader"
-msgstr "Lecteur G-Code"
+msgid "Version Upgrade 2.7 to 3.0"
+msgstr "Mise à niveau de version, de 2.7 vers 3.0"
 
-#: GCodeWriter/plugin.json
+#: AMFReader/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a file."
-msgstr "Enregistre le G-Code dans un fichier."
+msgid "Provides support for reading AMF files."
+msgstr "Fournit la prise en charge de la lecture de fichiers AMF."
 
-#: GCodeWriter/plugin.json
+#: AMFReader/plugin.json
 msgctxt "name"
-msgid "G-code Writer"
-msgstr "Générateur de G-Code"
+msgid "AMF Reader"
+msgstr "Lecteur AMF"
 
-#: ImageReader/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "description"
-msgid "Enables ability to generate printable geometry from 2D image files."
-msgstr "Permet de générer une géométrie imprimable à partir de fichiers d'image 2D."
+msgid "Provides support for importing profiles from g-code files."
+msgstr "Fournit la prise en charge de l'importation de profils à partir de fichiers g-code."
 
-#: ImageReader/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "name"
-msgid "Image Reader"
-msgstr "Lecteur d'images"
+msgid "G-code Profile Reader"
+msgstr "Lecteur de profil G-Code"
 
-#: LegacyProfileReader/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from legacy Cura versions."
-msgstr "Fournit la prise en charge de l'importation de profils à partir de versions Cura antérieures."
+msgid "Provides a machine actions for updating firmware."
+msgstr "Fournit à une machine des actions permettant la mise à jour du firmware."
 
-#: LegacyProfileReader/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "name"
-msgid "Legacy Cura Profile Reader"
-msgstr "Lecteur de profil Cura antérieur"
+msgid "Firmware Updater"
+msgstr "Programme de mise à jour du firmware"
 
-#: MachineSettingsAction/plugin.json
+#: X3DReader/plugin.json
 msgctxt "description"
-msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
-msgstr "Permet de modifier les paramètres de la machine (tels que volume d'impression, taille de buse, etc.)"
+msgid "Provides support for reading X3D files."
+msgstr "Fournit la prise en charge de la lecture de fichiers X3D."
 
-#: MachineSettingsAction/plugin.json
+#: X3DReader/plugin.json
 msgctxt "name"
-msgid "Machine Settings Action"
-msgstr "Action Paramètres de la machine"
+msgid "X3D Reader"
+msgstr "Lecteur X3D"
 
-#: MonitorStage/plugin.json
+#: Toolbox/plugin.json
 msgctxt "description"
-msgid "Provides a monitor stage in Cura."
-msgstr "Fournit une étape de surveillance dans Cura."
+msgid "Find, manage and install new Cura packages."
+msgstr "Rechercher, gérer et installer de nouveaux paquets Cura."
 
-#: MonitorStage/plugin.json
+#: Toolbox/plugin.json
 msgctxt "name"
-msgid "Monitor Stage"
-msgstr "Étape de surveillance"
+msgid "Toolbox"
+msgstr "Boîte à outils"
 
 #: PerObjectSettingsTool/plugin.json
 msgctxt "description"
@@ -5472,75 +5725,115 @@ msgctxt "name"
 msgid "Post Processing"
 msgstr "Post-traitement"
 
-#: PrepareStage/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "description"
-msgid "Provides a prepare stage in Cura."
-msgstr "Fournit une étape de préparation dans Cura."
+msgid "Provides the link to the CuraEngine slicing backend."
+msgstr "Fournit le lien vers l'arrière du système de découpage CuraEngine."
 
-#: PrepareStage/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "name"
-msgid "Prepare Stage"
-msgstr "Étape de préparation"
+msgid "CuraEngine Backend"
+msgstr "Système CuraEngine"
 
-#: PreviewStage/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "description"
-msgid "Provides a preview stage in Cura."
-msgstr "Fournit une étape de prévisualisation dans Cura."
+msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
+msgstr "Accepte les G-Code et les envoie à une imprimante. Ce plugin peut aussi mettre à jour le firmware."
 
-#: PreviewStage/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "name"
-msgid "Preview Stage"
-msgstr "Étape de prévisualisation"
+msgid "USB printing"
+msgstr "Impression par USB"
 
-#: RemovableDriveOutputDevice/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "description"
-msgid "Provides removable drive hotplugging and writing support."
-msgstr "Permet le branchement hot-plug et l'écriture sur lecteur amovible."
+msgid "Provides support for exporting Cura profiles."
+msgstr "Fournit la prise en charge de l'exportation de profils Cura."
 
-#: RemovableDriveOutputDevice/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "name"
-msgid "Removable Drive Output Device Plugin"
-msgstr "Plugin de périphérique de sortie sur disque amovible"
+msgid "Cura Profile Writer"
+msgstr "Générateur de profil Cura"
 
-#: SentryLogger/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "description"
-msgid "Logs certain events so that they can be used by the crash reporter"
-msgstr "Enregistre certains événements afin qu'ils puissent être utilisés par le rapporteur d'incident"
+msgid "Manages network connections to Ultimaker networked printers."
+msgstr "Gère les connexions réseau vers les imprimantes Ultimaker en réseau."
 
-#: SentryLogger/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "name"
-msgid "Sentry Logger"
-msgstr "Journal d'événements dans Sentry"
+msgid "Ultimaker Network Connection"
+msgstr "Connexion réseau Ultimaker"
 
-#: SimulationView/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "description"
-msgid "Provides the Simulation view."
-msgstr "Fournit la Vue simulation."
+msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
+msgstr "Fournit les actions de la machine pour les machines Ultimaker (telles que l'assistant de calibration du plateau, sélection des mises à niveau, etc.)"
 
-#: SimulationView/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "name"
-msgid "Simulation View"
-msgstr "Vue simulation"
+msgid "Ultimaker machine actions"
+msgstr "Actions de la machine Ultimaker"
 
-#: SliceInfoPlugin/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "description"
-msgid "Submits anonymous slice info. Can be disabled through preferences."
-msgstr "Envoie des informations anonymes sur le découpage. Peut être désactivé dans les préférences."
+msgid "Provides support for reading 3MF files."
+msgstr "Fournit la prise en charge de la lecture de fichiers 3MF."
 
-#: SliceInfoPlugin/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "name"
-msgid "Slice info"
-msgstr "Information sur le découpage"
+msgid "3MF Reader"
+msgstr "Lecteur 3MF"
 
-#: SolidView/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "description"
-msgid "Provides a normal solid mesh view."
-msgstr "Affiche une vue en maille solide normale."
+msgid "Writes g-code to a compressed archive."
+msgstr "Enregistre le G-Code dans une archive compressée."
 
-#: SolidView/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "name"
-msgid "Solid View"
-msgstr "Vue solide"
+msgid "Compressed G-code Writer"
+msgstr "Générateur de G-Code compressé"
+
+#: GCodeGzReader/plugin.json
+msgctxt "description"
+msgid "Reads g-code from a compressed archive."
+msgstr "Lit le G-Code à partir d'une archive compressée."
+
+#: GCodeGzReader/plugin.json
+msgctxt "name"
+msgid "Compressed G-code Reader"
+msgstr "Lecteur G-Code compressé"
+
+#: ModelChecker/plugin.json
+msgctxt "description"
+msgid "Checks models and print configuration for possible printing issues and give suggestions."
+msgstr "Vérifie les modèles et la configuration de l'impression pour déceler d'éventuels problèmes d'impression et donne des suggestions."
+
+#: ModelChecker/plugin.json
+msgctxt "name"
+msgid "Model Checker"
+msgstr "Contrôleur de modèle"
+
+#: FirmwareUpdateChecker/plugin.json
+msgctxt "description"
+msgid "Checks for firmware updates."
+msgstr "Vérifie les mises à jour du firmware."
+
+#: FirmwareUpdateChecker/plugin.json
+msgctxt "name"
+msgid "Firmware Update Checker"
+msgstr "Vérificateur des mises à jour du firmware"
+
+#: GCodeReader/plugin.json
+msgctxt "description"
+msgid "Allows loading and displaying G-code files."
+msgstr "Permet le chargement et l'affichage de fichiers G-Code."
+
+#: GCodeReader/plugin.json
+msgctxt "name"
+msgid "G-code Reader"
+msgstr "Lecteur G-Code"
 
 #: SupportEraser/plugin.json
 msgctxt "description"
@@ -5552,16 +5845,6 @@ msgctxt "name"
 msgid "Support Eraser"
 msgstr "Effaceur de support"
 
-#: Toolbox/plugin.json
-msgctxt "description"
-msgid "Find, manage and install new Cura packages."
-msgstr "Rechercher, gérer et installer de nouveaux paquets Cura."
-
-#: Toolbox/plugin.json
-msgctxt "name"
-msgid "Toolbox"
-msgstr "Boîte à outils"
-
 #: TrimeshReader/plugin.json
 msgctxt "description"
 msgid "Provides support for reading model files."
@@ -5572,6 +5855,16 @@ msgctxt "name"
 msgid "Trimesh Reader"
 msgstr "Lecteur de Trimesh"
 
+#: SentryLogger/plugin.json
+msgctxt "description"
+msgid "Logs certain events so that they can be used by the crash reporter"
+msgstr "Enregistre certains événements afin qu'ils puissent être utilisés par le rapporteur d'incident"
+
+#: SentryLogger/plugin.json
+msgctxt "name"
+msgid "Sentry Logger"
+msgstr "Journal d'événements dans Sentry"
+
 #: UFPReader/plugin.json
 msgctxt "description"
 msgid "Provides support for reading Ultimaker Format Packages."
@@ -5582,265 +5875,253 @@ msgctxt "name"
 msgid "UFP Reader"
 msgstr "Lecteur UFP"
 
-#: UFPWriter/plugin.json
-msgctxt "description"
-msgid "Provides support for writing Ultimaker Format Packages."
-msgstr "Permet l'écriture de fichiers Ultimaker Format Package."
-
-#: UFPWriter/plugin.json
-msgctxt "name"
-msgid "UFP Writer"
-msgstr "Générateur UFP"
-
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "description"
-msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
-msgstr "Fournit les actions de la machine pour les machines Ultimaker (telles que l'assistant de calibration du plateau, sélection des mises à niveau, etc.)"
+msgid "Provides support for importing profiles from legacy Cura versions."
+msgstr "Fournit la prise en charge de l'importation de profils à partir de versions Cura antérieures."
 
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "name"
-msgid "Ultimaker machine actions"
-msgstr "Actions de la machine Ultimaker"
+msgid "Legacy Cura Profile Reader"
+msgstr "Lecteur de profil Cura antérieur"
 
-#: UM3NetworkPrinting/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "description"
-msgid "Manages network connections to Ultimaker networked printers."
-msgstr "Gère les connexions réseau vers les imprimantes Ultimaker en réseau."
+msgid "Provides a prepare stage in Cura."
+msgstr "Fournit une étape de préparation dans Cura."
 
-#: UM3NetworkPrinting/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "name"
-msgid "Ultimaker Network Connection"
-msgstr "Connexion réseau Ultimaker"
+msgid "Prepare Stage"
+msgstr "Étape de préparation"
 
-#: USBPrinting/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "description"
-msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
-msgstr "Accepte les G-Code et les envoie à une imprimante. Ce plugin peut aussi mettre à jour le firmware."
+msgid "Provides a monitor stage in Cura."
+msgstr "Fournit une étape de surveillance dans Cura."
 
-#: USBPrinting/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "name"
-msgid "USB printing"
-msgstr "Impression par USB"
+msgid "Monitor Stage"
+msgstr "Étape de surveillance"
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: XRayView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
-msgstr "Configurations des mises à niveau de Cura 2.1 vers Cura 2.2."
+msgid "Provides the X-Ray view."
+msgstr "Permet la vue Rayon-X."
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: XRayView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.1 to 2.2"
-msgstr "Mise à niveau vers 2.1 vers 2.2"
+msgid "X-Ray View"
+msgstr "Vue Rayon-X"
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
-msgstr "Configurations des mises à niveau de Cura 2.2 vers Cura 2.4."
+msgid "Provides support for writing 3MF files."
+msgstr "Permet l'écriture de fichiers 3MF."
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.2 to 2.4"
-msgstr "Mise à niveau de 2.2 vers 2.4"
+msgid "3MF Writer"
+msgstr "Générateur 3MF"
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
-msgstr "Configurations des mises à niveau de Cura 2.5 vers Cura 2.6."
+msgid "Submits anonymous slice info. Can be disabled through preferences."
+msgstr "Envoie des informations anonymes sur le découpage. Peut être désactivé dans les préférences."
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.5 to 2.6"
-msgstr "Mise à niveau de 2.5 vers 2.6"
+msgid "Slice info"
+msgstr "Information sur le découpage"
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
-msgstr "Configurations des mises à niveau de Cura 2.6 vers Cura 2.7."
+msgid "Provides a preview stage in Cura."
+msgstr "Fournit une étape de prévisualisation dans Cura."
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.6 to 2.7"
-msgstr "Mise à niveau de 2.6 vers 2.7"
+msgid "Preview Stage"
+msgstr "Étape de prévisualisation"
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: SimulationView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
-msgstr "Met à niveau les configurations, de Cura 2.7 vers Cura 3.0."
+msgid "Provides the Simulation view."
+msgstr "Fournit la Vue simulation."
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: SimulationView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.7 to 3.0"
-msgstr "Mise à niveau de version, de 2.7 vers 3.0"
+msgid "Simulation View"
+msgstr "Vue simulation"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
-msgstr "Met à niveau les configurations, de Cura 3.0 vers Cura 3.1."
+msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
+msgstr "Permet de modifier les paramètres de la machine (tels que volume d'impression, taille de buse, etc.)"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.0 to 3.1"
-msgstr "Mise à niveau de version, de 3.0 vers 3.1"
+msgid "Machine Settings Action"
+msgstr "Action Paramètres de la machine"
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
-msgstr "Configurations des mises à niveau de Cura 3.2 vers Cura 3.3."
+msgid "Provides capabilities to read and write XML-based material profiles."
+msgstr "Offre la possibilité de lire et d'écrire des profils matériels basés sur XML."
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.2 to 3.3"
-msgstr "Mise à niveau de 3.2 vers 3.3"
+msgid "Material Profiles"
+msgstr "Profils matériels"
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: SolidView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
-msgstr "Configurations des mises à niveau de Cura 3.3 vers Cura 3.4."
+msgid "Provides a normal solid mesh view."
+msgstr "Affiche une vue en maille solide normale."
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: SolidView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.3 to 3.4"
-msgstr "Mise à niveau de 3.3 vers 3.4"
+msgid "Solid View"
+msgstr "Vue solide"
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
-msgstr "Configurations des mises à niveau de Cura 3.4 vers Cura 3.5."
+msgid "Provides support for importing Cura profiles."
+msgstr "Fournit la prise en charge de l'importation de profils Cura."
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.4 to 3.5"
-msgstr "Mise à niveau de 3.4 vers 3.5"
+msgid "Cura Profile Reader"
+msgstr "Lecteur de profil Cura"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
-msgstr "Configurations des mises à niveau de Cura 3.5 vers Cura 4.0."
+msgid "Provides support for writing Ultimaker Format Packages."
+msgstr "Permet l'écriture de fichiers Ultimaker Format Package."
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.5 to 4.0"
-msgstr "Mise à niveau de 3.5 vers 4.0"
+msgid "UFP Writer"
+msgstr "Générateur UFP"
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
-msgstr "Configurations des mises à niveau de Cura 4.0 vers Cura 4.1."
+msgid "Writes g-code to a file."
+msgstr "Enregistre le G-Code dans un fichier."
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.0 to 4.1"
-msgstr "Mise à niveau de 4.0 vers 4.1"
+msgid "G-code Writer"
+msgstr "Générateur de G-Code"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: ImageReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
-msgstr "Configurations des mises à jour de Cura 4.1 vers Cura 4.2."
+msgid "Enables ability to generate printable geometry from 2D image files."
+msgstr "Permet de générer une géométrie imprimable à partir de fichiers d'image 2D."
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: ImageReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.1 to 4.2"
-msgstr "Mise à jour de 4.1 vers 4.2"
+msgid "Image Reader"
+msgstr "Lecteur d'images"
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
-msgstr "Configurations des mises à jour de Cura 4.2 vers Cura 4.3."
+msgid "Backup and restore your configuration."
+msgstr "Sauvegardez et restaurez votre configuration."
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.2 to 4.3"
-msgstr "Mise à jour de 4.2 vers 4.3"
+msgid "Cura Backups"
+msgstr "Sauvegardes Cura"
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
-msgstr "Configurations des mises à niveau de Cura 4.3 vers Cura 4.4."
+#~ msgctxt "@info:status"
+#~ msgid "Global stack is missing."
+#~ msgstr "Il manque la pile globale."
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.3 to 4.4"
-msgstr "Mise à niveau de 4.3 vers 4.4"
+#~ msgctxt "@info:status"
+#~ msgid "Your model is not manifold. The highlighted areas indicate either missing or extraneous surfaces."
+#~ msgstr "Votre modèle n'est pas fonctionnel. Les zones surlignées indiquent que des surfaces manquent ou sont étrangères."
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
-msgstr "Configurations des mises à niveau de Cura 4.4 vers Cura 4.5."
+#~ msgctxt "@info:title"
+#~ msgid "Model errors"
+#~ msgstr "Erreurs du modèle"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.4 to 4.5"
-msgstr "Mise à niveau de 4.4 vers 4.5"
+#~ msgctxt "@label:listbox"
+#~ msgid "Layer thickness"
+#~ msgstr "Épaisseur de la couche"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
-msgstr "Mises à niveau des configurations de Cura 4.5 vers Cura 4.6."
+#~ msgctxt "@label"
+#~ msgid "Your key to connected 3D printing"
+#~ msgstr "Votre clé pour une impression 3D connectée"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.5 to 4.6"
-msgstr "Mise à niveau de 4.5 vers 4.6"
+#~ msgctxt "@text"
+#~ msgid ""
+#~ "- Customize your experience with more print profiles and plugins\n"
+#~ "- Stay flexible by syncing your setup and loading it anywhere\n"
+#~ "- Increase efficiency with a remote workflow on Ultimaker printers"
+#~ msgstr ""
+#~ "- Personnalisez votre expérience avec plus de profils d'impression et de plug-ins\n"
+#~ "- Restez flexible en synchronisant votre configuration et en la chargeant n'importe où\n"
+#~ "- Augmentez l'efficacité grâce à un flux de travail à distance sur les imprimantes Ultimaker"
 
-#: VersionUpgrade/VersionUpgrade460to462/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
-msgstr "Mises à niveau des configurations de Cura 4.6.0 vers Cura 4.6.2."
+#~ msgctxt "@button"
+#~ msgid "Create account"
+#~ msgstr "Créer un compte"
 
-#: VersionUpgrade/VersionUpgrade460to462/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.6.0 to 4.6.2"
-msgstr "Mise à niveau de 4.6.0 vers 4.6.2"
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Delete Selected Model"
+#~ msgid_plural "Delete Selected Models"
+#~ msgstr[0] "Supprimer le modèle sélectionné"
+#~ msgstr[1] "Supprimer les modèles sélectionnés"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
-msgstr "Mises à niveau des configurations de Cura 4.6.2 vers Cura 4.7."
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Center Selected Model"
+#~ msgid_plural "Center Selected Models"
+#~ msgstr[0] "Centrer le modèle sélectionné"
+#~ msgstr[1] "Centrer les modèles sélectionnés"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.6.2 to 4.7"
-msgstr "Mise à niveau de 4.6.2 vers 4.7"
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Multiply Selected Model"
+#~ msgid_plural "Multiply Selected Models"
+#~ msgstr[0] "Multiplier le modèle sélectionné"
+#~ msgstr[1] "Multiplier les modèles sélectionnés"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr "Mises à niveau des configurations de Cura 4.7 vers Cura 4.8."
+#~ msgctxt "@button"
+#~ msgid "Finish"
+#~ msgstr "Fin"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.7 to 4.8"
-msgstr "Mise à niveau de 4.7 vers 4.8"
+#~ msgctxt "@label"
+#~ msgid "Ultimaker Account"
+#~ msgstr "Compte Ultimaker"
 
-#: X3DReader/plugin.json
-msgctxt "description"
-msgid "Provides support for reading X3D files."
-msgstr "Fournit la prise en charge de la lecture de fichiers X3D."
+#~ msgctxt "@text"
+#~ msgid "Your key to connected 3D printing"
+#~ msgstr "Votre clé pour une impression 3D connectée"
 
-#: X3DReader/plugin.json
-msgctxt "name"
-msgid "X3D Reader"
-msgstr "Lecteur X3D"
+#~ msgctxt "@text"
+#~ msgid "- Customize your experience with more print profiles and plugins"
+#~ msgstr "- Personnalisez votre expérience avec plus de profils d'impression et de plug-ins"
 
-#: XmlMaterialProfile/plugin.json
-msgctxt "description"
-msgid "Provides capabilities to read and write XML-based material profiles."
-msgstr "Offre la possibilité de lire et d'écrire des profils matériels basés sur XML."
+#~ msgctxt "@text"
+#~ msgid "- Stay flexible by syncing your setup and loading it anywhere"
+#~ msgstr "- Restez flexible en synchronisant votre configuration et en la chargeant n'importe où"
 
-#: XmlMaterialProfile/plugin.json
-msgctxt "name"
-msgid "Material Profiles"
-msgstr "Profils matériels"
+#~ msgctxt "@text"
+#~ msgid "- Increase efficiency with a remote workflow on Ultimaker printers"
+#~ msgstr "- Augmentez l'efficacité avec un flux de travail à distance sur les imprimantes Ultimaker"
 
-#: XRayView/plugin.json
-msgctxt "description"
-msgid "Provides the X-Ray view."
-msgstr "Permet la vue Rayon-X."
+#~ msgctxt "@text"
+#~ msgid ""
+#~ "Please follow these steps to set up\n"
+#~ "Ultimaker Cura. This will only take a few moments."
+#~ msgstr ""
+#~ "Veuillez suivre ces étapes pour configurer\n"
+#~ "Ultimaker Cura. Cela ne prendra que quelques instants."
 
-#: XRayView/plugin.json
-msgctxt "name"
-msgid "X-Ray View"
-msgstr "Vue Rayon-X"
+#~ msgctxt "@label"
+#~ msgid "What's new in Ultimaker Cura"
+#~ msgstr "Quoi de neuf dans Ultimaker Cura"
 
 #~ msgctxt "@label ({} is object name)"
 #~ msgid "Are you sure you wish to remove {}? This cannot be undone!"