Update translation files from updated template

This is automated with 'make i18n-update-po'.

Contributes to issue CURA-7622.

1 files changed, 852 insertions, 456 deletions

diff --git a/resources/i18n/fr_FR/cura.po b/resources/i18n/fr_FR/cura.po
index 7a925583ec..384ff7fbfc 100644
--- a/resources/i18n/fr_FR/cura.po
+++ b/resources/i18n/fr_FR/cura.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.6\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-04-06 16:33+0200\n"
+"POT-Creation-Date: 2020-07-31 12:48+0200\n"
 "PO-Revision-Date: 2019-07-29 15:51+0200\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: French <info@lionbridge.com>, French <info@bothof.nl>\n"
@@ -17,159 +17,164 @@ msgstr ""
 "Plural-Forms: nplurals=2; plural=(n > 1);\n"
 "X-Generator: Poedit 2.2.3\n"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:85
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:104
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:340
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1490
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:188
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:229
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:110
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:351
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1566
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
 msgctxt "@label"
 msgid "Unknown"
 msgstr "Inconnu"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
 msgctxt "@label"
 msgid "The printer(s) below cannot be connected because they are part of a group"
 msgstr "Les imprimantes ci-dessous ne peuvent pas être connectées car elles font partie d'un groupe"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:117
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
 msgctxt "@label"
 msgid "Available networked printers"
 msgstr "Imprimantes en réseau disponibles"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/ExtrudersModel.py:208
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/ExtrudersModel.py:211
 msgctxt "@menuitem"
 msgid "Not overridden"
 msgstr "Pas écrasé"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:41
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/GlobalStacksModel.py:76
+msgctxt "@label ({} is object name)"
+msgid "Are you sure you wish to remove {}? This cannot be undone!"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42
 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:321
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:332
 msgctxt "@label"
 msgid "Default"
 msgstr "Default"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:44
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:45
 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:14
 msgctxt "@label"
 msgid "Visual"
 msgstr "Visuel"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:45
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:46
 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:15
 msgctxt "@text"
 msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
 msgstr "Le profil visuel est conçu pour imprimer des prototypes et des modèles visuels dans le but d'obtenir une qualité visuelle et de surface élevée."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:48
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:49
 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:18
 msgctxt "@label"
 msgid "Engineering"
 msgstr "Engineering"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:49
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:50
 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:19
 msgctxt "@text"
 msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
 msgstr "Le profil d'ingénierie est conçu pour imprimer des prototypes fonctionnels et des pièces finales dans le but d'obtenir une meilleure précision et des tolérances plus étroites."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:52
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:53
 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:22
 msgctxt "@label"
 msgid "Draft"
 msgstr "Ébauche"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:53
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:54
 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:23
 msgctxt "@text"
 msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
 msgstr "L'ébauche du profil est conçue pour imprimer les prototypes initiaux et la validation du concept dans le but de réduire considérablement le temps d'impression."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:213
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:226
 msgctxt "@label"
 msgid "Custom Material"
 msgstr "Matériau personnalisé"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:214
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:227
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
 msgctxt "@label"
 msgid "Custom"
 msgstr "Personnalisé"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:359
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:370
 msgctxt "@label"
 msgid "Custom profiles"
 msgstr "Personnaliser les profils"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:393
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:405
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "All Supported Types ({0})"
 msgstr "Tous les types supportés ({0})"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:394
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:406
 msgctxt "@item:inlistbox"
 msgid "All Files (*)"
 msgstr "Tous les fichiers (*)"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/API/Account.py:81
+#: /home/trin/Gedeeld/Projects/Cura/cura/API/Account.py:178
 msgctxt "@info:title"
 msgid "Login failed"
 msgstr "La connexion a échoué"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:66
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:30
+#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
+#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:31
 msgctxt "@info:status"
 msgid "Finding new location for objects"
 msgstr "Recherche d'un nouvel emplacement pour les objets"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:70
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:34
+#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
+#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:35
 msgctxt "@info:title"
 msgid "Finding Location"
 msgstr "Recherche d'emplacement"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:149
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:103
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:108
+#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150
+#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:105
+#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:111
 msgctxt "@info:status"
 msgid "Unable to find a location within the build volume for all objects"
 msgstr "Impossible de trouver un emplacement dans le volume d'impression pour tous les objets"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:104
+#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
+#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:106
 msgctxt "@info:title"
 msgid "Can't Find Location"
 msgstr "Impossible de trouver un emplacement"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:99
+#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:104
 msgctxt "@info:backup_failed"
 msgid "Could not create archive from user data directory: {}"
 msgstr "Impossible de créer une archive à partir du répertoire de données de l'utilisateur : {}"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:104
+#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:110
 #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107
 #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
 msgctxt "@info:title"
 msgid "Backup"
 msgstr "Sauvegarde"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:114
+#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:123
 msgctxt "@info:backup_failed"
 msgid "Tried to restore a Cura backup without having proper data or meta data."
 msgstr "A essayé de restaurer une sauvegarde Cura sans disposer de données ou de métadonnées appropriées."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:125
+#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:134
 msgctxt "@info:backup_failed"
 msgid "Tried to restore a Cura backup that is higher than the current version."
 msgstr "A essayé de restaurer une sauvegarde Cura supérieure à la version actuelle."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:95
+#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:98
 msgctxt "@info:status"
 msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
 msgstr "La hauteur du volume d'impression a été réduite en raison de la valeur du paramètre « Séquence d'impression » afin d'éviter que le portique ne heurte les modèles imprimés."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:97
+#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:100
 msgctxt "@info:title"
 msgid "Build Volume"
 msgstr "Volume d'impression"
@@ -214,12 +219,12 @@ msgctxt "@action:button"
 msgid "Backup and Reset Configuration"
 msgstr "Sauvegarder et réinitialiser la configuration"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:169
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:171
 msgctxt "@title:window"
 msgid "Crash Report"
 msgstr "Rapport d'incident"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:188
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:190
 msgctxt "@label crash message"
 msgid ""
 "<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
@@ -230,322 +235,333 @@ msgstr ""
 "            <p>Veuillez utiliser le bouton « Envoyer rapport » pour publier automatiquement un rapport d'erreur sur nos serveurs</p>\n"
 "        "
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:196
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:198
 msgctxt "@title:groupbox"
 msgid "System information"
 msgstr "Informations système"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:205
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:207
 msgctxt "@label unknown version of Cura"
 msgid "Unknown"
 msgstr "Inconnu"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:216
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:228
 msgctxt "@label Cura version number"
 msgid "Cura version"
 msgstr "Version Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:217
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:229
 msgctxt "@label"
 msgid "Cura language"
 msgstr "Langue de Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:218
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:230
 msgctxt "@label"
 msgid "OS language"
 msgstr "Langue du SE"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:219
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:231
 msgctxt "@label Type of platform"
 msgid "Platform"
 msgstr "Plate-forme"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:220
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:232
 msgctxt "@label"
 msgid "Qt version"
 msgstr "Version Qt"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:221
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:233
 msgctxt "@label"
 msgid "PyQt version"
 msgstr "Version PyQt"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:222
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:234
 msgctxt "@label OpenGL version"
 msgid "OpenGL"
 msgstr "OpenGL"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:247
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:261
 msgctxt "@label"
 msgid "Not yet initialized<br/>"
 msgstr "Pas encore initialisé<br/>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:250
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:264
 #, python-brace-format
 msgctxt "@label OpenGL version"
 msgid "<li>OpenGL Version: {version}</li>"
 msgstr "<li>Version OpenGL : {version}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:251
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:265
 #, python-brace-format
 msgctxt "@label OpenGL vendor"
 msgid "<li>OpenGL Vendor: {vendor}</li>"
 msgstr "<li>Revendeur OpenGL : {vendor}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:252
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:266
 #, python-brace-format
 msgctxt "@label OpenGL renderer"
 msgid "<li>OpenGL Renderer: {renderer}</li>"
 msgstr "<li>Moteur de rendu OpenGL : {renderer}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:286
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:300
 msgctxt "@title:groupbox"
 msgid "Error traceback"
 msgstr "Retraçage de l'erreur"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:372
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:386
 msgctxt "@title:groupbox"
 msgid "Logs"
 msgstr "Journaux"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:400
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:414
 msgctxt "@action:button"
 msgid "Send report"
 msgstr "Envoyer rapport"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:495
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:520
 msgctxt "@info:progress"
 msgid "Loading machines..."
 msgstr "Chargement des machines..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:502
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:527
 msgctxt "@info:progress"
 msgid "Setting up preferences..."
 msgstr "Configuration des préférences..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:630
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:656
 msgctxt "@info:progress"
 msgid "Initializing Active Machine..."
 msgstr "Initialisation de la machine active..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:757
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:787
 msgctxt "@info:progress"
 msgid "Initializing machine manager..."
 msgstr "Initialisation du gestionnaire de machine..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:771
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:801
 msgctxt "@info:progress"
 msgid "Initializing build volume..."
 msgstr "Initialisation du volume de fabrication..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:833
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:867
 msgctxt "@info:progress"
 msgid "Setting up scene..."
 msgstr "Préparation de la scène..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:868
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:903
 msgctxt "@info:progress"
 msgid "Loading interface..."
 msgstr "Chargement de l'interface..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:873
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:908
 msgctxt "@info:progress"
 msgid "Initializing engine..."
 msgstr "Initialisation du moteur..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1166
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1218
 #, python-format
 msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
 msgid "%(width).1f x %(depth).1f x %(height).1f mm"
 msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1676
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1769
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
 msgstr "Un seul fichier G-Code peut être chargé à la fois. Importation de {0} sautée"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1677
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1777
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:201
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1770
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1873
+#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:188
+#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
 msgctxt "@info:title"
 msgid "Warning"
 msgstr "Avertissement"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1686
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1779
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
 msgstr "Impossible d'ouvrir un autre fichier si le G-Code est en cours de chargement. Importation de {0} sautée"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1687
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:138
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:145
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:137
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1780
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:146
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:153
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
 msgctxt "@info:title"
 msgid "Error"
 msgstr "Erreur"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1776
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1872
 msgctxt "@info:status"
 msgid "The selected model was too small to load."
 msgstr "Le modèle sélectionné était trop petit pour être chargé."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:29
+#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:31
 msgctxt "@info:status"
 msgid "Multiplying and placing objects"
 msgstr "Multiplication et placement d'objets"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:30
+#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:32
 msgctxt "@info:title"
 msgid "Placing Objects"
 msgstr "Placement des objets"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:108
+#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:111
 msgctxt "@info:title"
 msgid "Placing Object"
 msgstr "Placement de l'objet"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationHelpers.py:79
+#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationHelpers.py:89
 msgctxt "@message"
 msgid "Could not read response."
 msgstr "Impossible de lire la réponse."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:68
+#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:74
 msgctxt "@message"
 msgid "The provided state is not correct."
 msgstr "L'état fourni n'est pas correct."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:79
+#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:85
 msgctxt "@message"
 msgid "Please give the required permissions when authorizing this application."
 msgstr "Veuillez donner les permissions requises lors de l'autorisation de cette application."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:86
+#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:92
 msgctxt "@message"
 msgid "Something unexpected happened when trying to log in, please try again."
 msgstr "Une erreur s'est produite lors de la connexion, veuillez réessayer."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:201
+#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:187
+msgctxt "@info"
+msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242
 msgctxt "@info"
 msgid "Unable to reach the Ultimaker account server."
 msgstr "Impossible d’atteindre le serveur du compte Ultimaker."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:196
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:124
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:203
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:132
 msgctxt "@title:window"
 msgid "File Already Exists"
 msgstr "Le fichier existe déjà"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:197
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:125
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:204
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:133
 #, python-brace-format
 msgctxt "@label Don't translate the XML tag <filename>!"
 msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
 msgstr "Le fichier <filename>{0}</filename> existe déjà. Êtes-vous sûr de vouloir le remplacer ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:432
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:435
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:450
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:453
 msgctxt "@info:status"
 msgid "Invalid file URL:"
 msgstr "URL de fichier invalide :"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:136
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:144
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "Échec de l'exportation du profil vers <filename>{0}</filename> : <message>{1}</message>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:143
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:151
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
 msgstr "Échec de l'exportation du profil vers <filename>{0}</filename> : le plug-in du générateur a rapporté une erreur."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:148
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:156
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Exported profile to <filename>{0}</filename>"
 msgstr "Profil exporté vers <filename>{0}</filename>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:149
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:157
 msgctxt "@info:title"
 msgid "Export succeeded"
 msgstr "L'exportation a réussi"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:176
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:188
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>: {1}"
 msgstr "Impossible d'importer le profil depuis <filename>{0}</filename> : {1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:180
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:192
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
 msgstr "Impossible d'importer le profil depuis <filename>{0}</filename> avant l'ajout d'une imprimante."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:197
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:207
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "No custom profile to import in file <filename>{0}</filename>"
 msgstr "Aucun profil personnalisé à importer dans le fichier <filename>{0}</filename>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:201
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:211
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr "Échec de l'importation du profil depuis le fichier <filename>{0}</filename> :"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:225
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:235
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:245
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
 msgstr "Le profil <filename>{0}</filename> contient des données incorrectes ; échec de l'importation."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:324
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:334
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr "Échec de l'importation du profil depuis le fichier <filename>{0}</filename> :"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:327
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:337
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Successfully imported profile {0}"
 msgstr "Importation du profil {0} réussie"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:330
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:340
 #, python-brace-format
 msgctxt "@info:status"
 msgid "File {0} does not contain any valid profile."
 msgstr "Le fichier {0} ne contient pas de profil valide."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:333
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:343
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Profile {0} has an unknown file type or is corrupted."
 msgstr "Le profil {0} est un type de fichier inconnu ou est corrompu."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:368
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:410
 msgctxt "@label"
 msgid "Custom profile"
 msgstr "Personnaliser le profil"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:384
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:426
 msgctxt "@info:status"
 msgid "Profile is missing a quality type."
 msgstr "Il manque un type de qualité au profil."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:398
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:440
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Could not find a quality type {0} for the current configuration."
 msgstr "Impossible de trouver un type de qualité {0} pour la configuration actuelle."
 
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:443
+msgctxt "@info:status"
+msgid "Unable to add the profile."
+msgstr ""
+
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36
 msgctxt "@info:not supported profile"
 msgid "Not supported"
@@ -556,23 +572,23 @@ msgctxt "@info:No intent profile selected"
 msgid "Default"
 msgstr "Default"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:659
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:199
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:703
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:218
 msgctxt "@label"
 msgid "Nozzle"
 msgstr "Buse"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:796
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:851
 msgctxt "@info:message Followed by a list of settings."
 msgid "Settings have been changed to match the current availability of extruders:"
 msgstr "Les paramètres ont été modifiés pour correspondre aux extrudeuses actuellement disponibles :"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:798
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:853
 msgctxt "@info:title"
 msgid "Settings updated"
 msgstr "Paramètres mis à jour"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1367
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1436
 msgctxt "@info:title"
 msgid "Extruder(s) Disabled"
 msgstr "Extrudeuse(s) désactivée(s)"
@@ -584,7 +600,13 @@ msgctxt "@action:button"
 msgid "Add"
 msgstr "Ajouter"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:18
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:26
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:263
+msgctxt "@action:button"
+msgid "Finish"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:33
 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:406
 #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:234
 #: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
@@ -594,73 +616,73 @@ msgstr "Ajouter"
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:87
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:296
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292
 msgctxt "@action:button"
 msgid "Cancel"
 msgstr "Annuler"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/ObjectsModel.py:62
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/ObjectsModel.py:69
 #, python-brace-format
 msgctxt "@label"
 msgid "Group #{group_nr}"
 msgstr "Groupe nº {group_nr}"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:81
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:83
 msgctxt "@tooltip"
 msgid "Outer Wall"
 msgstr "Paroi externe"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:82
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:84
 msgctxt "@tooltip"
 msgid "Inner Walls"
 msgstr "Parois internes"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:83
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:85
 msgctxt "@tooltip"
 msgid "Skin"
 msgstr "Couche extérieure"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:84
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:86
 msgctxt "@tooltip"
 msgid "Infill"
 msgstr "Remplissage"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:85
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:87
 msgctxt "@tooltip"
 msgid "Support Infill"
 msgstr "Remplissage du support"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:86
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:88
 msgctxt "@tooltip"
 msgid "Support Interface"
 msgstr "Interface du support"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:87
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:89
 msgctxt "@tooltip"
 msgid "Support"
 msgstr "Support"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:88
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:90
 msgctxt "@tooltip"
 msgid "Skirt"
 msgstr "Jupe"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:89
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:91
 msgctxt "@tooltip"
 msgid "Prime Tower"
 msgstr "Tour primaire"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:90
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:92
 msgctxt "@tooltip"
 msgid "Travel"
 msgstr "Déplacement"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:91
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:93
 msgctxt "@tooltip"
 msgid "Retractions"
 msgstr "Rétractions"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:92
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:94
 msgctxt "@tooltip"
 msgid "Other"
 msgstr "Autre"
@@ -672,9 +694,9 @@ msgstr "Suivant"
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:17
 #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:131
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
 #: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:169
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:171
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:127
 msgctxt "@action:button"
 msgid "Close"
@@ -685,7 +707,7 @@ msgctxt "@info:title"
 msgid "3D Model Assistant"
 msgstr "Assistant de modèle 3D"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:94
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:96
 #, python-brace-format
 msgctxt "@info:status"
 msgid ""
@@ -699,17 +721,34 @@ msgstr ""
 "<p>Découvrez comment optimiser la qualité et la fiabilité de l'impression.</p>\n"
 "<p><a href=\"https://ultimaker.com/3D-model-assistant\">Consultez le guide de qualité d'impression</a></p>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:497
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:521
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
 msgstr "Le fichier projet <filename>{0}</filename> contient un type de machine inconnu <message>{1}</message>. Impossible d'importer la machine. Les modèles seront importés à la place."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:500
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:524
 msgctxt "@info:title"
 msgid "Open Project File"
 msgstr "Ouvrir un fichier de projet"
 
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:622
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:623
+msgctxt "@info:title"
+msgid "Can't Open Project File"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:668
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tag <filename>!"
+msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
+msgstr ""
+
 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:186
 msgctxt "@title:tab"
 msgid "Recommended"
@@ -737,7 +776,7 @@ msgctxt "@error:zip"
 msgid "No permission to write the workspace here."
 msgstr "Aucune autorisation d'écrire l'espace de travail ici."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:181
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:185
 msgctxt "@error:zip"
 msgid "Error writing 3mf file."
 msgstr "Erreur d'écriture du fichier 3MF."
@@ -803,61 +842,64 @@ msgctxt "@item:inmenu"
 msgid "Manage backups"
 msgstr "Gérer les sauvegardes"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:343
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356
 msgctxt "@info:status"
 msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
 msgstr "Impossible de découper le matériau actuel, car celui-ci est incompatible avec la machine ou la configuration sélectionnée."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:343
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:374
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:398
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:407
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:416
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:387
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:411
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:420
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:441
 msgctxt "@info:title"
 msgid "Unable to slice"
 msgstr "Impossible de découper"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:373
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:386
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Unable to slice with the current settings. The following settings have errors: {0}"
 msgstr "Impossible de couper avec les paramètres actuels. Les paramètres suivants contiennent des erreurs : {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:397
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:410
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
 msgstr "Impossible de couper en raison de certains paramètres par modèle. Les paramètres suivants contiennent des erreurs sur un ou plusieurs modèles : {error_labels}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:406
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:419
 msgctxt "@info:status"
 msgid "Unable to slice because the prime tower or prime position(s) are invalid."
 msgstr "Impossible de couper car la tour primaire ou la (les) position(s) d'amorçage ne sont pas valides."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:415
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
 #, python-format
 msgctxt "@info:status"
 msgid "Unable to slice because there are objects associated with disabled Extruder %s."
 msgstr "Impossible de couper car il existe des objets associés à l'extrudeuse désactivée %s."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:424
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437
 msgctxt "@info:status"
 msgid ""
 "Please review settings and check if your models:\n"
 "- Fit within the build volume\n"
 "- Are assigned to an enabled extruder\n"
 "- Are not all set as modifier meshes"
-msgstr "Veuillez vérifier les paramètres et si vos modèles :\n- S'intègrent dans le volume de fabrication\n- Sont affectés à un extrudeur activé\n- N sont pas"
-" tous définis comme des mailles de modificateur"
+msgstr ""
+"Veuillez vérifier les paramètres et si vos modèles :\n"
+"- S'intègrent dans le volume de fabrication\n"
+"- Sont affectés à un extrudeur activé\n"
+"- N sont pas tous définis comme des mailles de modificateur"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:50
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:256
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
 msgctxt "@info:status"
 msgid "Processing Layers"
 msgstr "Traitement des couches"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:256
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
 msgctxt "@info:title"
 msgid "Information"
 msgstr "Informations"
@@ -868,7 +910,7 @@ msgctxt "@item:inlistbox"
 msgid "Cura Profile"
 msgstr "Profil Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:126
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
 msgctxt "@info"
 msgid "Could not access update information."
 msgstr "Impossible d'accéder aux informations de mise à jour."
@@ -876,21 +918,21 @@ msgstr "Impossible d'accéder aux informations de mise à jour."
 #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
 #, python-brace-format
 msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
-msgid "New features are available for your {machine_name}! It is recommended to update the firmware on your printer."
-msgstr "De nouvelles fonctionnalités sont disponibles pour votre {machine_name} ! Il est recommandé de mettre à jour le firmware sur votre imprimante."
+msgid "New features or bug-fixes may be available for your {machine_name}! If not already at the latest version, it is recommended to update the firmware on your printer to version {latest_version}."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:21
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
 #, python-format
 msgctxt "@info:title The %s gets replaced with the printer name."
 msgid "New %s firmware available"
 msgstr "Nouveau firmware %s disponible"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:27
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
 msgctxt "@action:button"
 msgid "How to update"
 msgstr "Comment effectuer la mise à jour"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:25
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
 msgctxt "@action"
 msgid "Update Firmware"
 msgstr "Mettre à jour le firmware"
@@ -901,7 +943,7 @@ msgctxt "@item:inlistbox"
 msgid "Compressed G-code File"
 msgstr "Fichier G-Code compressé"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:38
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
 msgctxt "@error:not supported"
 msgid "GCodeGzWriter does not support text mode."
 msgstr "GCodeGzWriter ne prend pas en charge le mode texte."
@@ -913,18 +955,18 @@ msgctxt "@item:inlistbox"
 msgid "G-code File"
 msgstr "Fichier GCode"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:341
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:347
 msgctxt "@info:status"
 msgid "Parsing G-code"
 msgstr "Analyse du G-Code"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:343
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:497
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:349
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:503
 msgctxt "@info:title"
 msgid "G-code Details"
 msgstr "Détails G-Code"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:495
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:501
 msgctxt "@info:generic"
 msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
 msgstr "Assurez-vous que le g-code est adapté à votre imprimante et à la configuration de l'imprimante avant d'y envoyer le fichier. La représentation du g-code peut ne pas être exacte."
@@ -934,13 +976,13 @@ msgctxt "@item:inlistbox"
 msgid "G File"
 msgstr "Fichier G"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:66
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:74
 msgctxt "@error:not supported"
 msgid "GCodeWriter does not support non-text mode."
 msgstr "GCodeWriter ne prend pas en charge le mode non-texte."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:72
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:88
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:80
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:96
 msgctxt "@warning:status"
 msgid "Please prepare G-code before exporting."
 msgstr "Veuillez préparer le G-Code avant d'exporter."
@@ -975,7 +1017,7 @@ msgctxt "@item:inlistbox"
 msgid "Cura 15.04 profiles"
 msgstr "Profils Cura 15.04"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:30
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
 msgctxt "@action"
 msgid "Machine Settings"
 msgstr "Paramètres de la machine"
@@ -995,12 +1037,12 @@ msgctxt "@info:tooltip"
 msgid "Configure Per Model Settings"
 msgstr "Configurer les paramètres par modèle"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
 msgctxt "@item:inmenu"
 msgid "Post Processing"
 msgstr "Post-traitement"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:37
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
 msgctxt "@item:inmenu"
 msgid "Modify G-Code"
 msgstr "Modifier le G-Code"
@@ -1026,108 +1068,109 @@ msgctxt "@item:inlistbox"
 msgid "Save to Removable Drive {0}"
 msgstr "Enregistrer sur un lecteur amovible {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:64
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:107
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
 msgctxt "@info:status"
 msgid "There are no file formats available to write with!"
 msgstr "Aucun format de fichier n'est disponible pour écriture !"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:94
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
 #, python-brace-format
 msgctxt "@info:progress Don't translate the XML tags <filename>!"
 msgid "Saving to Removable Drive <filename>{0}</filename>"
 msgstr "Enregistrement sur le lecteur amovible <filename>{0}</filename>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:94
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
 msgctxt "@info:title"
 msgid "Saving"
 msgstr "Enregistrement"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:104
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:107
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "Impossible d'enregistrer <filename>{0}</filename> : <message>{1}</message>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:123
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:125
 #, python-brace-format
 msgctxt "@info:status Don't translate the tag {device}!"
 msgid "Could not find a file name when trying to write to {device}."
 msgstr "Impossible de trouver un nom de fichier lors d'une tentative d'écriture sur {device}."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:136
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Could not save to removable drive {0}: {1}"
 msgstr "Impossible d'enregistrer sur le lecteur {0}: {1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:145
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Saved to Removable Drive {0} as {1}"
 msgstr "Enregistré sur le lecteur amovible {0} sous {1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:145
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
 msgctxt "@info:title"
 msgid "File Saved"
 msgstr "Fichier enregistré"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:146
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
 msgctxt "@action:button"
 msgid "Eject"
 msgstr "Ejecter"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:146
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
 #, python-brace-format
 msgctxt "@action"
 msgid "Eject removable device {0}"
 msgstr "Ejecter le lecteur amovible {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Ejected {0}. You can now safely remove the drive."
 msgstr "Lecteur {0} éjecté. Vous pouvez maintenant le retirer en tout sécurité."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
 msgctxt "@info:title"
 msgid "Safely Remove Hardware"
 msgstr "Retirez le lecteur en toute sécurité"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Failed to eject {0}. Another program may be using the drive."
 msgstr "Impossible d'éjecter {0}. Un autre programme utilise peut-être ce lecteur."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:75
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
 msgctxt "@item:intext"
 msgid "Removable Drive"
 msgstr "Lecteur amovible"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:119
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:121
 msgctxt "@info:status"
 msgid "Cura does not accurately display layers when Wire Printing is enabled."
 msgstr "Cura n'affiche pas les couches avec précision lorsque l'impression filaire est activée."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:120
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:122
 msgctxt "@info:title"
 msgid "Simulation View"
 msgstr "Vue simulation"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:121
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123
 msgctxt "@info:status"
 msgid "Nothing is shown because you need to slice first."
 msgstr "Rien ne s'affiche car vous devez d'abord découper."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:121
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123
 msgctxt "@info:title"
 msgid "No layers to show"
 msgstr "Pas de couches à afficher"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:122
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:124
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:73
 msgctxt "@info:option_text"
 msgid "Do not show this message again"
 msgstr "Ne plus afficher ce message"
@@ -1137,6 +1180,16 @@ msgctxt "@item:inlistbox"
 msgid "Layer view"
 msgstr "Vue en couches"
 
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:70
+msgctxt "@info:status"
+msgid "Your model is not manifold. The highlighted areas indicate either missing or extraneous surfaces."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:72
+msgctxt "@info:title"
+msgid "Model errors"
+msgstr ""
+
 #: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/__init__.py:12
 msgctxt "@item:inmenu"
 msgid "Solid view"
@@ -1152,23 +1205,23 @@ msgctxt "@info:tooltip"
 msgid "Create a volume in which supports are not printed."
 msgstr "Créer un volume dans lequel les supports ne sont pas imprimés."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:101
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
 msgctxt "@info:generic"
 msgid "Do you want to sync material and software packages with your account?"
 msgstr "Vous souhaitez synchroniser du matériel et des logiciels avec votre compte ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:102
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:91
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93
 msgctxt "@info:title"
 msgid "Changes detected from your Ultimaker account"
 msgstr "Changements détectés à partir de votre compte Ultimaker"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:105
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:146
 msgctxt "@action:button"
 msgid "Sync"
 msgstr "Synchroniser"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:87
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:89
 msgctxt "@info:generic"
 msgid "Syncing..."
 msgstr "Synchronisation..."
@@ -1194,12 +1247,12 @@ msgctxt "@button"
 msgid "Decline and remove from account"
 msgstr "Décliner et supprimer du compte"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:18
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:20
 msgctxt "@info:generic"
 msgid "You need to quit and restart {} before changes have effect."
 msgstr "Vous devez quitter et redémarrer {} avant que les changements apportés ne prennent effet."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:71
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:76
 msgctxt "@info:generic"
 msgid "{} plugins failed to download"
 msgstr "Échec de téléchargement des plugins {}"
@@ -1240,30 +1293,110 @@ msgctxt "@item:inlistbox"
 msgid "Ultimaker Format Package"
 msgstr "Ultimaker Format Package"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:21
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:146
+msgctxt "@info:error"
+msgid "Can't write to UFP file:"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
 msgctxt "@action"
 msgid "Level build plate"
 msgstr "Nivellement du plateau"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:18
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
 msgctxt "@action"
 msgid "Select upgrades"
 msgstr "Sélectionner les mises à niveau"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:139
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:148
 msgctxt "@action:button"
-msgid "Print via Cloud"
-msgstr "Imprimer via le cloud"
+msgid "Print via cloud"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:140
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:149
 msgctxt "@properties:tooltip"
-msgid "Print via Cloud"
-msgstr "Imprimer via le cloud"
+msgid "Print via cloud"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:141
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:150
 msgctxt "@info:status"
-msgid "Connected via Cloud"
-msgstr "Connecté via le cloud"
+msgid "Connected via cloud"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:226
+msgctxt "info:status"
+msgid "New printer detected from your Ultimaker account"
+msgid_plural "New printers detected from your Ultimaker account"
+msgstr[0] ""
+msgstr[1] ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:238
+msgctxt "info:status"
+msgid "Adding printer {} ({}) from your account"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:258
+msgctxt "info:hidden list items"
+msgid "<li>... and {} others</li>"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:265
+msgctxt "info:status"
+msgid "Printers added from Digital Factory:<ul>{}</ul>"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:324
+msgctxt "info:status"
+msgid "A cloud connection is not available for a printer"
+msgid_plural "A cloud connection is not available for some printers"
+msgstr[0] ""
+msgstr[1] ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:332
+msgctxt "info:status"
+msgid "This printer is not linked to the Digital Factory:"
+msgid_plural "These printers are not linked to the Digital Factory:"
+msgstr[0] ""
+msgstr[1] ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:338
+msgctxt "info:status"
+msgid "<ul>{}</ul>To establish a connection, please visit the <a href='https://mycloud.ultimaker.com/'>Ultimaker Digital Factory</a>."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:344
+msgctxt "@action:button"
+msgid "Keep printer configurations"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:349
+msgctxt "@action:button"
+msgid "Remove printers"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:428
+msgctxt "@label ({} is printer name)"
+msgid "{} will be removed until the next account sync. <br> To remove {} permanently, visit <a href='https://mycloud.ultimaker.com/'>Ultimaker Digital Factory</a>. <br><br>Are you sure you want to remove {} temporarily?"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468
+msgctxt "@title:window"
+msgid "Remove printers?"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:469
+msgctxt "@label"
+msgid ""
+"You are about to remove {} printer(s) from Cura. This action cannot be undone. \n"
+"Are you sure you want to continue?"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:471
+msgctxt "@label"
+msgid ""
+"You are about to remove all printers from Cura. This action cannot be undone. \n"
+"Are you sure you want to continue?"
+msgstr ""
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
 msgctxt "@info:status"
@@ -1272,8 +1405,8 @@ msgstr "Lancez et surveillez des impressions où que vous soyez avec votre compt
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
 msgctxt "@info:status Ultimaker Cloud should not be translated."
-msgid "Connect to Ultimaker Cloud"
-msgstr "Se connecter à Ultimaker Cloud"
+msgid "Connect to Ultimaker Digital Factory"
+msgstr ""
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
 msgctxt "@action"
@@ -1337,12 +1470,12 @@ msgctxt "@info:title"
 msgid "Network error"
 msgstr "Erreur de réseau"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:14
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
 msgctxt "@info:status"
 msgid "Sending Print Job"
 msgstr "Lancement d'une tâche d'impression"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
 msgctxt "@info:status"
 msgid "Uploading print job to printer."
 msgstr "Téléchargement de la tâche d'impression sur l'imprimante."
@@ -1357,22 +1490,22 @@ msgctxt "@info:title"
 msgid "Data Sent"
 msgstr "Données envoyées"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:57
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Print over network"
 msgstr "Imprimer sur le réseau"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
 msgctxt "@properties:tooltip"
 msgid "Print over network"
 msgstr "Imprimer sur le réseau"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
 msgctxt "@info:status"
 msgid "Connected over the network"
 msgstr "Connecté sur le réseau"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:26
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
 msgctxt "@action"
 msgid "Connect via Network"
 msgstr "Connecter via le réseau"
@@ -1412,12 +1545,12 @@ msgctxt "@label"
 msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
 msgstr "Une impression USB est en cours, la fermeture de Cura arrêtera cette impression. Êtes-vous sûr ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:128
+#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:130
 msgctxt "@message"
 msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
 msgstr "Une impression est encore en cours. Cura ne peut pas démarrer une autre impression via USB tant que l'impression précédente n'est pas terminée."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:128
+#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:130
 msgctxt "@message"
 msgid "Print in Progress"
 msgstr "Impression en cours"
@@ -1453,13 +1586,13 @@ msgid "Create new"
 msgstr "Créer"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:70
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:73
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
 msgctxt "@action:title"
 msgid "Summary - Cura Project"
 msgstr "Résumé - Projet Cura"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:92
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:97
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
 msgctxt "@action:label"
 msgid "Printer settings"
 msgstr "Paramètres de l'imprimante"
@@ -1481,19 +1614,19 @@ msgid "Create new"
 msgstr "Créer"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:143
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:106
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
 msgctxt "@action:label"
 msgid "Type"
 msgstr "Type"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:159
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:121
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
 msgctxt "@action:label"
 msgid "Printer Group"
 msgstr "Groupe d'imprimantes"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:180
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:222
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
 msgctxt "@action:label"
 msgid "Profile settings"
 msgstr "Paramètres de profil"
@@ -1505,26 +1638,26 @@ msgstr "Comment le conflit du profil doit-il être résolu ?"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:216
 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:323
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:121
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:246
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242
 msgctxt "@action:label"
 msgid "Name"
 msgstr "Nom"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:231
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:263
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
 msgctxt "@action:label"
 msgid "Intent"
 msgstr "Intent"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:246
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:230
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
 msgctxt "@action:label"
 msgid "Not in profile"
 msgstr "Absent du profil"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:251
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:235
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
 msgctxt "@action:label"
 msgid "%1 override"
 msgid_plural "%1 overrides"
@@ -1679,9 +1812,9 @@ msgid "Backup and synchronize your Cura settings."
 msgstr "Sauvegardez et synchronisez vos paramètres Cura."
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:48
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:68
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:138
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:125
 msgctxt "@button"
 msgid "Sign in"
 msgstr "Se connecter"
@@ -2042,42 +2175,42 @@ msgctxt "@label link to technical assistance"
 msgid "View user manuals online"
 msgstr "Voir les manuels d'utilisation en ligne"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:45
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
 msgctxt "@label"
 msgid "Mesh Type"
 msgstr "Type de maille"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:75
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
 msgctxt "@label"
 msgid "Normal model"
 msgstr "Modèle normal"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:87
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
 msgctxt "@label"
 msgid "Print as support"
 msgstr "Imprimer comme support"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:99
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
 msgctxt "@label"
 msgid "Modify settings for overlaps"
 msgstr "Modifier les paramètres de chevauchement"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:111
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
 msgctxt "@label"
 msgid "Don't support overlaps"
 msgstr "Ne prend pas en charge le chevauchement"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:142
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:149
 msgctxt "@item:inlistbox"
 msgid "Infill mesh only"
 msgstr "Maille de remplissage uniquement"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:143
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:150
 msgctxt "@item:inlistbox"
 msgid "Cutting mesh"
 msgstr "Maille de coupe"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:373
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:380
 msgctxt "@action:button"
 msgid "Select settings"
 msgstr "Sélectionner les paramètres"
@@ -2093,7 +2226,7 @@ msgctxt "@label:textbox"
 msgid "Filter..."
 msgstr "Filtrer..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:70
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
 msgctxt "@label:checkbox"
 msgid "Show all"
 msgstr "Afficher tout"
@@ -2232,21 +2365,6 @@ msgctxt "@text:window"
 msgid "Allow sending anonymous data"
 msgstr "Autoriser l'envoi de données anonymes"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/RatingWidget.qml:54
-msgctxt "@label"
-msgid "You need to login first before you can rate"
-msgstr "Vous devez être connecté avant de pouvoir effectuer une évaluation"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/RatingWidget.qml:54
-msgctxt "@label"
-msgid "You need to install the package before you can rate"
-msgstr "Vous devez installer le paquet avant de pouvoir effectuer une évaluation"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/SmallRatingWidget.qml:27
-msgctxt "@label"
-msgid "ratings"
-msgstr "évaluations"
-
 #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
 msgctxt "@action:button"
 msgid "Back"
@@ -2333,8 +2451,8 @@ msgstr "Mis à jour"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
 msgctxt "@label"
-msgid "Featured"
-msgstr "Fonctionnalités"
+msgid "Premium"
+msgstr ""
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
 #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
@@ -2358,14 +2476,12 @@ msgid "Quit %1"
 msgstr "Quitter %1"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:34
 msgctxt "@title:tab"
 msgid "Plugins"
 msgstr "Plug-ins"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:79
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:442
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:466
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
 msgctxt "@title:tab"
 msgid "Materials"
@@ -2468,27 +2584,23 @@ msgctxt "@label"
 msgid "Email"
 msgstr "E-mail"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:97
-msgctxt "@label"
-msgid "Your rating"
-msgstr "Votre évaluation"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:105
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
 msgctxt "@label"
 msgid "Version"
 msgstr "Version"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:112
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
 msgctxt "@label"
 msgid "Last updated"
 msgstr "Dernière mise à jour"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:119
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
 msgctxt "@label"
-msgid "Author"
-msgstr "Auteur"
+msgid "Brand"
+msgstr "Marque"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:126
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
 msgctxt "@label"
 msgid "Downloads"
 msgstr "Téléchargements"
@@ -2513,15 +2625,45 @@ msgctxt "@info"
 msgid "Could not connect to the Cura Package database. Please check your connection."
 msgstr "Impossible de se connecter à la base de données Cura Package. Veuillez vérifier votre connexion."
 
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
+msgctxt "@title:tab"
+msgid "Installed plugins"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
+msgctxt "@info"
+msgid "No plugin has been installed."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:86
+msgctxt "@title:tab"
+msgid "Installed materials"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:125
+msgctxt "@info"
+msgid "No material has been installed."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:139
+msgctxt "@title:tab"
+msgid "Bundled plugins"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:184
+msgctxt "@title:tab"
+msgid "Bundled materials"
+msgstr ""
+
 #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:16
 msgctxt "@info"
 msgid "Fetching packages..."
 msgstr "Récupération des paquets..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:31
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
 msgctxt "@description"
-msgid "Get plugins and materials verified by Ultimaker"
-msgstr "Faire vérifier les plugins et matériaux par Ultimaker"
+msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
+msgstr ""
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
 msgctxt "@title"
@@ -2970,28 +3112,61 @@ msgid ""
 "- Customize your experience with more print profiles and plugins\n"
 "- Stay flexible by syncing your setup and loading it anywhere\n"
 "- Increase efficiency with a remote workflow on Ultimaker printers"
-msgstr "- Personnalisez votre expérience avec plus de profils d'impression et de plug-ins\n- Restez flexible en synchronisant votre configuration et en la chargeant"
-" n'importe où\n- Augmentez l'efficacité grâce à un flux de travail à distance sur les imprimantes Ultimaker"
+msgstr ""
+"- Personnalisez votre expérience avec plus de profils d'impression et de plug-ins\n"
+"- Restez flexible en synchronisant votre configuration et en la chargeant n'importe où\n"
+"- Augmentez l'efficacité grâce à un flux de travail à distance sur les imprimantes Ultimaker"
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:78
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:142
 msgctxt "@button"
 msgid "Create account"
 msgstr "Créer un compte"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:22
-msgctxt "@label The argument is a username."
-msgid "Hi %1"
-msgstr "Bonjour %1"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:28
+msgctxt "@label"
+msgid "Checking..."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:35
+msgctxt "@label"
+msgid "Account synced"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:33
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:42
+msgctxt "@label"
+msgid "Something went wrong..."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:96
 msgctxt "@button"
-msgid "Ultimaker account"
-msgstr "Compte Ultimaker"
+msgid "Install pending updates"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:42
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:118
 msgctxt "@button"
-msgid "Sign out"
-msgstr "Déconnexion"
+msgid "Check for account updates"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:81
+msgctxt "@label The argument is a timestamp"
+msgid "Last update: %1"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:99
+msgctxt "@button"
+msgid "Ultimaker Digital Factory"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:109
+msgctxt "@button"
+msgid "Ultimaker Account"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:125
+msgctxt "@button"
+msgid "Sign Out"
+msgstr ""
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
 msgctxt "@label"
@@ -3285,7 +3460,7 @@ msgid "Show Configuration Folder"
 msgstr "Afficher le dossier de configuration"
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:441
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:545
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:538
 msgctxt "@action:menu"
 msgid "Configure setting visibility..."
 msgstr "Configurer la visibilité des paramètres..."
@@ -3295,72 +3470,72 @@ msgctxt "@action:menu"
 msgid "&Marketplace"
 msgstr "&Marché en ligne"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:242
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:266
 msgctxt "@label"
 msgid "This package will be installed after restarting."
 msgstr "Ce paquet sera installé après le redémarrage."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:435
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:459
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:15
 msgctxt "@title:tab"
 msgid "General"
 msgstr "Général"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:438
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:462
 msgctxt "@title:tab"
 msgid "Settings"
 msgstr "Paramètres"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:440
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:464
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:16
 msgctxt "@title:tab"
 msgid "Printers"
 msgstr "Imprimantes"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:444
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:468
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:34
 msgctxt "@title:tab"
 msgid "Profiles"
 msgstr "Profils"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:563
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:587
 msgctxt "@title:window %1 is the application name"
 msgid "Closing %1"
 msgstr "Fermeture de %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:564
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:576
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:588
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:600
 msgctxt "@label %1 is the application name"
 msgid "Are you sure you want to exit %1?"
 msgstr "Voulez-vous vraiment quitter %1 ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:614
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:638
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
 msgctxt "@title:window"
 msgid "Open file(s)"
 msgstr "Ouvrir le(s) fichier(s)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:720
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:744
 msgctxt "@window:title"
 msgid "Install Package"
 msgstr "Installer le paquet"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:728
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:752
 msgctxt "@title:window"
 msgid "Open File(s)"
 msgstr "Ouvrir le(s) fichier(s)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:731
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:755
 msgctxt "@text:window"
 msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
 msgstr "Nous avons trouvé au moins un fichier G-Code parmi les fichiers que vous avez sélectionné. Vous ne pouvez ouvrir qu'un seul fichier G-Code à la fois. Si vous souhaitez ouvrir un fichier G-Code, veuillez ne sélectionner qu'un seul fichier de ce type."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:834
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:858
 msgctxt "@title:window"
 msgid "Add Printer"
 msgstr "Ajouter une imprimante"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:842
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:866
 msgctxt "@title:window"
 msgid "What's New"
 msgstr "Quoi de neuf"
@@ -3461,50 +3636,56 @@ msgstr "Prise en charge de la bibliothèque pour le traitement des mailles trian
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:150
 msgctxt "@label"
-msgid "Support library for analysis of complex networks"
-msgstr "Prise en charge de la bibliothèque pour l'analyse de réseaux complexes"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:151
-msgctxt "@label"
 msgid "Support library for handling 3MF files"
 msgstr "Prise en charge de la bibliothèque pour le traitement des fichiers 3MF"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:152
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:151
 msgctxt "@label"
 msgid "Support library for file metadata and streaming"
 msgstr "Prise en charge de la bibliothèque pour les métadonnées et le streaming de fichiers"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:152
 msgctxt "@label"
 msgid "Serial communication library"
 msgstr "Bibliothèque de communication série"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:154
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:153
 msgctxt "@label"
 msgid "ZeroConf discovery library"
 msgstr "Bibliothèque de découverte ZeroConf"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:154
 msgctxt "@label"
 msgid "Polygon clipping library"
 msgstr "Bibliothèque de découpe polygone"
 
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+msgctxt "@Label"
+msgid "Static type checker for Python"
+msgstr ""
+
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:156
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:157
 msgctxt "@Label"
-msgid "Python HTTP library"
-msgstr "Bibliothèque Python HTTP"
+msgid "Root Certificates for validating SSL trustworthiness"
+msgstr ""
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:158
+msgctxt "@Label"
+msgid "Python Error tracking library"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Font"
 msgstr "Police"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:159
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:161
 msgctxt "@label"
 msgid "SVG icons"
 msgstr "Icônes SVG"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:162
 msgctxt "@label"
 msgid "Linux cross-distribution application deployment"
 msgstr "Déploiement d'applications sur multiples distributions Linux"
@@ -3540,59 +3721,48 @@ msgid "Discard or Keep changes"
 msgstr "Annuler ou conserver les modifications"
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
-msgctxt "@text:window"
+msgctxt "@text:window, %1 is a profile name"
 msgid ""
 "You have customized some profile settings.\n"
-"Would you like to keep or discard those settings?"
+"Would you like to Keep these changed settings after switching profiles?\n"
+"Alternatively, you can Discard the changes to load the defaults from '%1'."
 msgstr ""
-"Vous avez personnalisé certains paramètres du profil.\n"
-"Souhaitez-vous conserver ces changements, ou les annuler ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:109
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
 msgctxt "@title:column"
 msgid "Profile settings"
 msgstr "Paramètres du profil"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:116
-msgctxt "@title:column"
-msgid "Default"
-msgstr "Par défaut"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:123
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125
 msgctxt "@title:column"
-msgid "Customized"
-msgstr "Personnalisé"
+msgid "Current changes"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:156
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:708
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:747
 msgctxt "@option:discardOrKeep"
 msgid "Always ask me this"
 msgstr "Toujours me demander"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:157
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:159
 msgctxt "@option:discardOrKeep"
 msgid "Discard and never ask again"
 msgstr "Annuler et ne plus me demander"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
 msgctxt "@option:discardOrKeep"
 msgid "Keep and never ask again"
 msgstr "Conserver et ne plus me demander"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:195
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:197
 msgctxt "@action:button"
-msgid "Discard"
-msgstr "Annuler"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:208
-msgctxt "@action:button"
-msgid "Keep"
-msgstr "Conserver"
+msgid "Discard changes"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:221
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:210
 msgctxt "@action:button"
-msgid "Create New Profile"
-msgstr "Créer un nouveau profil"
+msgid "Keep changes"
+msgstr ""
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
 msgctxt "@text:window"
@@ -3609,27 +3779,27 @@ msgctxt "@title:window"
 msgid "Save Project"
 msgstr "Enregistrer le projet"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:177
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:173
 msgctxt "@action:label"
 msgid "Extruder %1"
 msgstr "Extrudeuse %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:193
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:189
 msgctxt "@action:label"
 msgid "%1 & material"
 msgstr "%1 & matériau"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:195
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191
 msgctxt "@action:label"
 msgid "Material"
 msgstr "Matériau"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:285
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:281
 msgctxt "@action:label"
 msgid "Don't show project summary on save again"
 msgstr "Ne pas afficher à nouveau le résumé du projet lors de l'enregistrement"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:304
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:300
 msgctxt "@action:button"
 msgid "Save"
 msgstr "Enregistrer"
@@ -3657,39 +3827,39 @@ msgctxt "@title:menu menubar:toplevel"
 msgid "&Edit"
 msgstr "&Modifier"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:48
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:12
 msgctxt "@title:menu menubar:toplevel"
 msgid "&View"
 msgstr "&Visualisation"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:50
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:13
 msgctxt "@title:menu menubar:toplevel"
 msgid "&Settings"
 msgstr "&Paramètres"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:55
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:56
 msgctxt "@title:menu menubar:toplevel"
 msgid "E&xtensions"
 msgstr "E&xtensions"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:93
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:94
 msgctxt "@title:menu menubar:toplevel"
 msgid "P&references"
 msgstr "P&références"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:101
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:102
 msgctxt "@title:menu menubar:toplevel"
 msgid "&Help"
 msgstr "&Aide"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:147
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148
 msgctxt "@title:window"
 msgid "New project"
 msgstr "Nouveau projet"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:149
 msgctxt "@info:question"
 msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
 msgstr "Êtes-vous sûr(e) de souhaiter lancer un nouveau projet ? Cela supprimera les objets du plateau ainsi que tous paramètres non enregistrés."
@@ -3780,8 +3950,8 @@ msgstr "Nombre de copies"
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:33
 msgctxt "@title:menu menubar:file"
-msgid "&Save..."
-msgstr "Enregi&strer..."
+msgid "&Save Project..."
+msgstr ""
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:54
 msgctxt "@title:menu menubar:file"
@@ -3828,22 +3998,22 @@ msgctxt "@title:menu menubar:settings"
 msgid "&Printer"
 msgstr "Im&primante"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:27
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:29
 msgctxt "@title:menu"
 msgid "&Material"
 msgstr "&Matériau"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:36
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:44
 msgctxt "@action:inmenu"
 msgid "Set as Active Extruder"
 msgstr "Définir comme extrudeur actif"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:42
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:50
 msgctxt "@action:inmenu"
 msgid "Enable Extruder"
 msgstr "Activer l'extrudeuse"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:49
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:57
 msgctxt "@action:inmenu"
 msgid "Disable Extruder"
 msgstr "Désactiver l'extrudeuse"
@@ -3938,291 +4108,338 @@ msgctxt "@label"
 msgid "Are you sure you want to abort the print?"
 msgstr "Êtes-vous sûr(e) de vouloir abandonner l'impression ?"
 
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:102
+msgctxt "@label"
+msgid "Is printed as support."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:105
+msgctxt "@label"
+msgid "Other models overlapping with this model are modified."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:108
+msgctxt "@label"
+msgid "Infill overlapping with this model is modified."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:111
+msgctxt "@label"
+msgid "Overlaps with this model are not supported."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:118
+msgctxt "@label"
+msgid "Overrides %1 setting."
+msgid_plural "Overrides %1 settings."
+msgstr[0] ""
+msgstr[1] ""
+
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectSelector.qml:59
 msgctxt "@label"
 msgid "Object list"
 msgstr "Liste d'objets"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:132
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:137
 msgctxt "@label"
 msgid "Interface"
 msgstr "Interface"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:211
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:216
 msgctxt "@label"
 msgid "Currency:"
 msgstr "Devise :"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:224
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:229
 msgctxt "@label"
 msgid "Theme:"
 msgstr "Thème :"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:280
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:285
 msgctxt "@label"
 msgid "You will need to restart the application for these changes to have effect."
 msgstr "Vous devez redémarrer l'application pour que ces changements prennent effet."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:297
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:302
 msgctxt "@info:tooltip"
 msgid "Slice automatically when changing settings."
 msgstr "Découper automatiquement si les paramètres sont modifiés."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:305
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:310
 msgctxt "@option:check"
 msgid "Slice automatically"
 msgstr "Découper automatiquement"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:319
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:324
 msgctxt "@label"
 msgid "Viewport behavior"
 msgstr "Comportement Viewport"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:327
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:332
 msgctxt "@info:tooltip"
 msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly."
 msgstr "Surligne les parties non supportées du modèle en rouge. Sans ajouter de support, ces zones ne s'imprimeront pas correctement."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:336
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:341
 msgctxt "@option:check"
 msgid "Display overhang"
 msgstr "Mettre en surbrillance les porte-à-faux"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:344
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:351
+msgctxt "@info:tooltip"
+msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:360
+msgctxt "@option:check"
+msgid "Display model errors"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:368
 msgctxt "@info:tooltip"
 msgid "Moves the camera so the model is in the center of the view when a model is selected"
 msgstr "Déplace la caméra afin que le modèle sélectionné se trouve au centre de la vue"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:349
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:373
 msgctxt "@action:button"
 msgid "Center camera when item is selected"
 msgstr "Centrer la caméra lorsqu'un élément est sélectionné"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:359
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:383
 msgctxt "@info:tooltip"
 msgid "Should the default zoom behavior of cura be inverted?"
 msgstr "Le comportement de zoom par défaut de Cura doit-il être inversé ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:364
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:388
 msgctxt "@action:button"
 msgid "Invert the direction of camera zoom."
 msgstr "Inverser la direction du zoom de la caméra."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:380
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404
 msgctxt "@info:tooltip"
 msgid "Should zooming move in the direction of the mouse?"
 msgstr "Le zoom doit-il se faire dans la direction de la souris ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:380
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404
 msgctxt "@info:tooltip"
 msgid "Zooming towards the mouse is not supported in the orthographic perspective."
 msgstr "Le zoom vers la souris n'est pas pris en charge dans la perspective orthographique."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:385
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:409
 msgctxt "@action:button"
 msgid "Zoom toward mouse direction"
 msgstr "Zoomer vers la direction de la souris"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:411
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:435
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved so that they no longer intersect?"
 msgstr "Les modèles dans la zone d'impression doivent-ils être déplacés afin de ne plus se croiser ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:416
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:440
 msgctxt "@option:check"
 msgid "Ensure models are kept apart"
 msgstr "Veillez à ce que les modèles restent séparés"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:425
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:449
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved down to touch the build plate?"
 msgstr "Les modèles dans la zone d'impression doivent-ils être abaissés afin de toucher le plateau ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:430
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:454
 msgctxt "@option:check"
 msgid "Automatically drop models to the build plate"
 msgstr "Abaisser automatiquement les modèles sur le plateau"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:442
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:466
 msgctxt "@info:tooltip"
 msgid "Show caution message in g-code reader."
 msgstr "Afficher le message d'avertissement dans le lecteur G-Code."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:451
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:475
 msgctxt "@option:check"
 msgid "Caution message in g-code reader"
 msgstr "Message d'avertissement dans le lecteur G-Code"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:459
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:483
 msgctxt "@info:tooltip"
 msgid "Should layer be forced into compatibility mode?"
 msgstr "La couche doit-elle être forcée en mode de compatibilité ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:464
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:488
 msgctxt "@option:check"
 msgid "Force layer view compatibility mode (restart required)"
 msgstr "Forcer l'affichage de la couche en mode de compatibilité (redémarrage requis)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:474
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:498
 msgctxt "@info:tooltip"
 msgid "Should Cura open at the location it was closed?"
 msgstr "Est-ce que Cura devrait ouvrir à l'endroit où il a été fermé ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:479
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:503
 msgctxt "@option:check"
 msgid "Restore window position on start"
 msgstr "Restaurer la position de la fenêtre au démarrage"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:489
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:513
 msgctxt "@info:tooltip"
 msgid "What type of camera rendering should be used?"
 msgstr "Quel type de rendu de la caméra doit-il être utilisé?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:496
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:520
 msgctxt "@window:text"
 msgid "Camera rendering:"
 msgstr "Rendu caméra :"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:507
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:531
 msgid "Perspective"
 msgstr "Perspective"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:508
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:532
 msgid "Orthographic"
 msgstr "Orthographique"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:539
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:563
 msgctxt "@label"
 msgid "Opening and saving files"
 msgstr "Ouvrir et enregistrer des fichiers"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:546
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:570
+msgctxt "@info:tooltip"
+msgid "Should opening files from the desktop or external applications open in the same instance of Cura?"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:575
+msgctxt "@option:check"
+msgid "Use a single instance of Cura"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:585
 msgctxt "@info:tooltip"
 msgid "Should models be scaled to the build volume if they are too large?"
 msgstr "Les modèles doivent-ils être mis à l'échelle du volume d'impression s'ils sont trop grands ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:551
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:590
 msgctxt "@option:check"
 msgid "Scale large models"
 msgstr "Réduire la taille des modèles trop grands"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:561
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:600
 msgctxt "@info:tooltip"
 msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?"
 msgstr "Un modèle peut apparaître en tout petit si son unité est par exemple en mètres plutôt qu'en millimètres. Ces modèles doivent-ils être agrandis ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:566
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:605
 msgctxt "@option:check"
 msgid "Scale extremely small models"
 msgstr "Mettre à l'échelle les modèles extrêmement petits"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:576
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:615
 msgctxt "@info:tooltip"
 msgid "Should models be selected after they are loaded?"
 msgstr "Les modèles doivent-ils être sélectionnés après leur chargement ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:581
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:620
 msgctxt "@option:check"
 msgid "Select models when loaded"
 msgstr "Sélectionner les modèles lorsqu'ils sont chargés"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:591
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:630
 msgctxt "@info:tooltip"
 msgid "Should a prefix based on the printer name be added to the print job name automatically?"
 msgstr "Un préfixe basé sur le nom de l'imprimante doit-il être automatiquement ajouté au nom de la tâche d'impression ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:596
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:635
 msgctxt "@option:check"
 msgid "Add machine prefix to job name"
 msgstr "Ajouter le préfixe de la machine au nom de la tâche"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:606
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:645
 msgctxt "@info:tooltip"
 msgid "Should a summary be shown when saving a project file?"
 msgstr "Un résumé doit-il être affiché lors de l'enregistrement d'un fichier de projet ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:610
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:649
 msgctxt "@option:check"
 msgid "Show summary dialog when saving project"
 msgstr "Afficher la boîte de dialogue du résumé lors de l'enregistrement du projet"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:620
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:659
 msgctxt "@info:tooltip"
 msgid "Default behavior when opening a project file"
 msgstr "Comportement par défaut lors de l'ouverture d'un fichier de projet"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:628
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:667
 msgctxt "@window:text"
 msgid "Default behavior when opening a project file: "
 msgstr "Comportement par défaut lors de l'ouverture d'un fichier de projet : "
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:642
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:681
 msgctxt "@option:openProject"
 msgid "Always ask me this"
 msgstr "Toujours me demander"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:643
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:682
 msgctxt "@option:openProject"
 msgid "Always open as a project"
 msgstr "Toujours ouvrir comme projet"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:644
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:683
 msgctxt "@option:openProject"
 msgid "Always import models"
 msgstr "Toujours importer les modèles"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:680
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:719
 msgctxt "@info:tooltip"
 msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
 msgstr "Lorsque vous apportez des modifications à un profil puis passez à un autre profil, une boîte de dialogue apparaît, vous demandant si vous souhaitez conserver les modifications. Vous pouvez aussi choisir une option par défaut, et le dialogue ne s'affichera plus."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:689
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:728
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
 msgctxt "@label"
 msgid "Profiles"
 msgstr "Profils"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:694
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:733
 msgctxt "@window:text"
 msgid "Default behavior for changed setting values when switching to a different profile: "
 msgstr "Comportement par défaut pour les valeurs de paramètres modifiées lors du passage à un profil différent : "
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:709
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:748
 msgctxt "@option:discardOrKeep"
 msgid "Always discard changed settings"
 msgstr "Toujours rejeter les paramètres modifiés"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:710
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:749
 msgctxt "@option:discardOrKeep"
 msgid "Always transfer changed settings to new profile"
 msgstr "Toujours transférer les paramètres modifiés dans le nouveau profil"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:744
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:783
 msgctxt "@label"
 msgid "Privacy"
 msgstr "Confidentialité"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:751
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:790
 msgctxt "@info:tooltip"
 msgid "Should Cura check for updates when the program is started?"
 msgstr "Cura doit-il vérifier les mises à jour au démarrage du programme ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:756
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:795
 msgctxt "@option:check"
 msgid "Check for updates on start"
 msgstr "Vérifier les mises à jour au démarrage"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:766
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:805
 msgctxt "@info:tooltip"
 msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored."
 msgstr "Les données anonymes de votre impression doivent-elles être envoyées à Ultimaker ? Notez qu'aucun modèle, aucune adresse IP ni aucune autre information permettant de vous identifier personnellement ne seront envoyés ou stockés."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:771
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:810
 msgctxt "@option:check"
 msgid "Send (anonymous) print information"
 msgstr "Envoyer des informations (anonymes) sur l'impression"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:780
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:819
 msgctxt "@action:button"
 msgid "More information"
 msgstr "Plus d'informations"
@@ -4331,11 +4548,6 @@ msgctxt "@label"
 msgid "Display Name"
 msgstr "Afficher le nom"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
-msgctxt "@label"
-msgid "Brand"
-msgstr "Marque"
-
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
 msgctxt "@label"
 msgid "Material Type"
@@ -4630,12 +4842,32 @@ msgctxt "@info:status"
 msgid "The printer is not connected."
 msgstr "L'imprimante n'est pas connectée."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:166
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
+msgctxt "@status"
+msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
+msgctxt "@status"
+msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please check your internet connection."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:238
 msgctxt "@button"
 msgid "Add printer"
 msgstr "Ajouter une imprimante"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:182
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:254
 msgctxt "@button"
 msgid "Manage printers"
 msgstr "Gérer les imprimantes"
@@ -4675,7 +4907,7 @@ msgctxt "@label"
 msgid "Profile"
 msgstr "Profil"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:172
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
 msgctxt "@tooltip"
 msgid ""
 "Some setting/override values are different from the values stored in the profile.\n"
@@ -4763,7 +4995,7 @@ msgctxt "@label"
 msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
 msgstr "Générer des structures pour soutenir les parties du modèle qui possèdent des porte-à-faux. Sans ces structures, ces parties s'effondreront durant l'impression."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingCategory.qml:234
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingCategory.qml:200
 msgctxt "@label"
 msgid ""
 "Some hidden settings use values different from their normal calculated value.\n"
@@ -4826,27 +5058,27 @@ msgctxt "@label:textbox"
 msgid "Search settings"
 msgstr "Paramètres de recherche"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:463
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:456
 msgctxt "@action:menu"
 msgid "Copy value to all extruders"
 msgstr "Copier la valeur vers tous les extrudeurs"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:472
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:465
 msgctxt "@action:menu"
 msgid "Copy all changed values to all extruders"
 msgstr "Copier toutes les valeurs modifiées vers toutes les extrudeuses"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:509
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:502
 msgctxt "@action:menu"
 msgid "Hide this setting"
 msgstr "Masquer ce paramètre"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:522
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:515
 msgctxt "@action:menu"
 msgid "Don't show this setting"
 msgstr "Masquer ce paramètre"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:526
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:519
 msgctxt "@action:menu"
 msgid "Keep this setting visible"
 msgstr "Afficher ce paramètre"
@@ -4881,12 +5113,52 @@ msgctxt "@label"
 msgid "View type"
 msgstr "Type d'affichage"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:212
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
+msgctxt "@label"
+msgid "Add a Cloud printer"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:73
+msgctxt "@label"
+msgid "Waiting for Cloud response"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:84
+msgctxt "@label"
+msgid "No printers found in your account?"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:118
+msgctxt "@label"
+msgid "The following printers in your account have been added in Cura:"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:200
+msgctxt "@button"
+msgid "Add printer manually"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:214
+msgctxt "@button"
+msgid "Finish"
+msgstr "Fin"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:231
+msgctxt "@label"
+msgid "Manufacturer"
+msgstr "Fabricant"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:245
+msgctxt "@label"
+msgid "Profile author"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:260
 msgctxt "@label"
 msgid "Printer name"
 msgstr "Nom de l'imprimante"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:225
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:269
 msgctxt "@text"
 msgid "Please give your printer a name"
 msgstr "Veuillez donner un nom à votre imprimante"
@@ -4901,27 +5173,32 @@ msgctxt "@label"
 msgid "Add a networked printer"
 msgstr "Ajouter une imprimante en réseau"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:81
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:95
 msgctxt "@label"
 msgid "Add a non-networked printer"
 msgstr "Ajouter une imprimante hors réseau"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:42
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
 msgctxt "@label"
 msgid "There is no printer found over your network."
 msgstr "Aucune imprimante n'a été trouvée sur votre réseau."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:180
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:181
 msgctxt "@label"
 msgid "Refresh"
 msgstr "Rafraîchir"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:191
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:192
 msgctxt "@label"
 msgid "Add printer by IP"
 msgstr "Ajouter une imprimante par IP"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:224
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:203
+msgctxt "@label"
+msgid "Add cloud printer"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:239
 msgctxt "@label"
 msgid "Troubleshooting"
 msgstr "Dépannage"
@@ -4933,8 +5210,8 @@ msgstr "Ajouter une imprimante par adresse IP"
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
 msgctxt "@text"
-msgid "Place enter your printer's IP address."
-msgstr "Saisissez l'adresse IP de votre imprimante."
+msgid "Enter your printer's IP address."
+msgstr ""
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
 msgctxt "@button"
@@ -4972,40 +5249,35 @@ msgctxt "@button"
 msgid "Connect"
 msgstr "Se connecter"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:36
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:43
 msgctxt "@label"
 msgid "Ultimaker Account"
 msgstr "Compte Ultimaker"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:77
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:84
 msgctxt "@text"
 msgid "Your key to connected 3D printing"
 msgstr "Votre clé pour une impression 3D connectée"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:94
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:101
 msgctxt "@text"
 msgid "- Customize your experience with more print profiles and plugins"
 msgstr "- Personnalisez votre expérience avec plus de profils d'impression et de plug-ins"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:97
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:104
 msgctxt "@text"
 msgid "- Stay flexible by syncing your setup and loading it anywhere"
 msgstr "- Restez flexible en synchronisant votre configuration et en la chargeant n'importe où"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:100
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:107
 msgctxt "@text"
 msgid "- Increase efficiency with a remote workflow on Ultimaker printers"
 msgstr "- Augmentez l'efficacité avec un flux de travail à distance sur les imprimantes Ultimaker"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:119
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:157
 msgctxt "@button"
-msgid "Finish"
-msgstr "Fin"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:128
-msgctxt "@button"
-msgid "Create an account"
-msgstr "Créer un compte"
+msgid "Skip"
+msgstr ""
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
 msgctxt "@label"
@@ -5606,6 +5878,26 @@ msgctxt "name"
 msgid "Version Upgrade 4.5 to 4.6"
 msgstr "Mise à niveau de 4.5 vers 4.6"
 
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
+msgstr ""
+
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.6.0 to 4.6.2"
+msgstr ""
+
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
+msgstr ""
+
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.6.2 to 4.7"
+msgstr ""
+
 #: X3DReader/plugin.json
 msgctxt "description"
 msgid "Provides support for reading X3D files."
@@ -5636,6 +5928,114 @@ msgctxt "name"
 msgid "X-Ray View"
 msgstr "Vue Rayon-X"
 
+#~ msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
+#~ msgid "New features are available for your {machine_name}! It is recommended to update the firmware on your printer."
+#~ msgstr "De nouvelles fonctionnalités sont disponibles pour votre {machine_name} ! Il est recommandé de mettre à jour le firmware sur votre imprimante."
+
+#~ msgctxt "@action:button"
+#~ msgid "Print via Cloud"
+#~ msgstr "Imprimer via le cloud"
+
+#~ msgctxt "@properties:tooltip"
+#~ msgid "Print via Cloud"
+#~ msgstr "Imprimer via le cloud"
+
+#~ msgctxt "@info:status"
+#~ msgid "Connected via Cloud"
+#~ msgstr "Connecté via le cloud"
+
+#~ msgctxt "@info:status Ultimaker Cloud should not be translated."
+#~ msgid "Connect to Ultimaker Cloud"
+#~ msgstr "Se connecter à Ultimaker Cloud"
+
+#~ msgctxt "@label"
+#~ msgid "You need to login first before you can rate"
+#~ msgstr "Vous devez être connecté avant de pouvoir effectuer une évaluation"
+
+#~ msgctxt "@label"
+#~ msgid "You need to install the package before you can rate"
+#~ msgstr "Vous devez installer le paquet avant de pouvoir effectuer une évaluation"
+
+#~ msgctxt "@label"
+#~ msgid "ratings"
+#~ msgstr "évaluations"
+
+#~ msgctxt "@label"
+#~ msgid "Featured"
+#~ msgstr "Fonctionnalités"
+
+#~ msgctxt "@label"
+#~ msgid "Your rating"
+#~ msgstr "Votre évaluation"
+
+#~ msgctxt "@label"
+#~ msgid "Author"
+#~ msgstr "Auteur"
+
+#~ msgctxt "@description"
+#~ msgid "Get plugins and materials verified by Ultimaker"
+#~ msgstr "Faire vérifier les plugins et matériaux par Ultimaker"
+
+#~ msgctxt "@label The argument is a username."
+#~ msgid "Hi %1"
+#~ msgstr "Bonjour %1"
+
+#~ msgctxt "@button"
+#~ msgid "Ultimaker account"
+#~ msgstr "Compte Ultimaker"
+
+#~ msgctxt "@button"
+#~ msgid "Sign out"
+#~ msgstr "Déconnexion"
+
+#~ msgctxt "@label"
+#~ msgid "Support library for analysis of complex networks"
+#~ msgstr "Prise en charge de la bibliothèque pour l'analyse de réseaux complexes"
+
+#~ msgctxt "@Label"
+#~ msgid "Python HTTP library"
+#~ msgstr "Bibliothèque Python HTTP"
+
+#~ msgctxt "@text:window"
+#~ msgid ""
+#~ "You have customized some profile settings.\n"
+#~ "Would you like to keep or discard those settings?"
+#~ msgstr ""
+#~ "Vous avez personnalisé certains paramètres du profil.\n"
+#~ "Souhaitez-vous conserver ces changements, ou les annuler ?"
+
+#~ msgctxt "@title:column"
+#~ msgid "Default"
+#~ msgstr "Par défaut"
+
+#~ msgctxt "@title:column"
+#~ msgid "Customized"
+#~ msgstr "Personnalisé"
+
+#~ msgctxt "@action:button"
+#~ msgid "Discard"
+#~ msgstr "Annuler"
+
+#~ msgctxt "@action:button"
+#~ msgid "Keep"
+#~ msgstr "Conserver"
+
+#~ msgctxt "@action:button"
+#~ msgid "Create New Profile"
+#~ msgstr "Créer un nouveau profil"
+
+#~ msgctxt "@title:menu menubar:file"
+#~ msgid "&Save..."
+#~ msgstr "Enregi&strer..."
+
+#~ msgctxt "@text"
+#~ msgid "Place enter your printer's IP address."
+#~ msgstr "Saisissez l'adresse IP de votre imprimante."
+
+#~ msgctxt "@button"
+#~ msgid "Create an account"
+#~ msgstr "Créer un compte"
+
 #~ msgctxt "@info:generic"
 #~ msgid ""
 #~ "\n"
@@ -6464,10 +6864,6 @@ msgstr "Vue Rayon-X"
 #~ "Si votre imprimante n'est pas dans la liste, utilisez l'imprimante « Imprimante FFF personnalisée » de la catégorie « Personnalisé » et ajustez les paramètres pour qu'ils correspondent à votre imprimante dans le dialogue suivant."
 
 #~ msgctxt "@label"
-#~ msgid "Manufacturer"
-#~ msgstr "Fabricant"
-
-#~ msgctxt "@label"
 #~ msgid "Printer Name"
 #~ msgstr "Nom de l'imprimante"