Update 4.9 translations after verification with PoEdit

CURA-8153

3 files changed, 133 insertions, 295 deletions

diff --git a/resources/i18n/fr_FR/cura.po b/resources/i18n/fr_FR/cura.po
index 88b5702bdc..9478c31057 100644
--- a/resources/i18n/fr_FR/cura.po
+++ b/resources/i18n/fr_FR/cura.po
@@ -7,7 +7,7 @@ msgstr ""
 "Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
 "POT-Creation-Date: 2021-04-02 16:10+0200\n"
-"PO-Revision-Date: 2020-11-09 14:02+0100\n"
+"PO-Revision-Date: 2021-04-16 15:16+0200\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: French <info@lionbridge.com>, French <info@bothof.nl>\n"
 "Language: fr_FR\n"
@@ -69,10 +69,7 @@ msgctxt "@info:status"
 msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
 msgstr "Un seul fichier G-Code peut être chargé à la fois. Importation de {0} sautée"
 
-#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1800
-#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:188
-#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:242
-#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1800 /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:188 /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:242 /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 #: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
 msgctxt "@info:title"
 msgid "Warning"
@@ -84,10 +81,7 @@ msgctxt "@info:status"
 msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
 msgstr "Impossible d'ouvrir un autre fichier si le G-Code est en cours de chargement. Importation de {0} sautée"
 
-#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1810
-#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:146
-#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:153
-#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1810 /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:146 /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:153 /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
 msgctxt "@info:title"
 msgid "Error"
 msgstr "Erreur"
@@ -103,25 +97,18 @@ msgctxt "@label"
 msgid "Custom Material"
 msgstr "Matériau personnalisé"
 
-#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/MaterialManagementModel.py:227
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/MaterialManagementModel.py:227 /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
 msgctxt "@label"
 msgid "Custom"
 msgstr "Personnalisé"
 
-#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:338
-#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:11
-#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:42
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:338 /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:11 /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:42
 msgctxt "@label"
 msgid "Default"
 msgstr "Default"
 
-#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:361
-#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:110
-#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
-#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:1612
-#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
-#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:361 /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:110 /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83 /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:1612
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130 /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
 msgctxt "@label"
 msgid "Unknown"
 msgstr "Inconnu"
@@ -142,38 +129,32 @@ msgctxt "@item:inlistbox"
 msgid "All Files (*)"
 msgstr "Tous les fichiers (*)"
 
-#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:14
-#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:45
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:14 /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:45
 msgctxt "@label"
 msgid "Visual"
 msgstr "Visuel"
 
-#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:15
-#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:46
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:15 /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:46
 msgctxt "@text"
 msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
 msgstr "Le profil visuel est conçu pour imprimer des prototypes et des modèles visuels dans le but d'obtenir une qualité visuelle et de surface élevée."
 
-#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:18
-#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:49
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:18 /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:49
 msgctxt "@label"
 msgid "Engineering"
 msgstr "Engineering"
 
-#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:19
-#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:50
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:19 /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:50
 msgctxt "@text"
 msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
 msgstr "Le profil d'ingénierie est conçu pour imprimer des prototypes fonctionnels et des pièces finales dans le but d'obtenir une meilleure précision et des tolérances plus étroites."
 
-#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:22
-#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:53
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:22 /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:53
 msgctxt "@label"
 msgid "Draft"
 msgstr "Ébauche"
 
-#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:23
-#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:54
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:23 /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:54
 msgctxt "@text"
 msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
 msgstr "L'ébauche du profil est conçue pour imprimer les prototypes initiaux et la validation du concept dans le but de réduire considérablement le temps d'impression."
@@ -367,27 +348,23 @@ msgctxt "@message"
 msgid "Something unexpected happened when trying to log in, please try again."
 msgstr "Une erreur s'est produite lors de la connexion, veuillez réessayer."
 
-#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:205
-#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:132
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:205 /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:132
 msgctxt "@title:window"
 msgid "File Already Exists"
 msgstr "Le fichier existe déjà"
 
-#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:206
-#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:133
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:206 /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:133
 #, python-brace-format
 msgctxt "@label Don't translate the XML tag <filename>!"
 msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
 msgstr "Le fichier <filename>{0}</filename> existe déjà. Êtes-vous sûr de vouloir le remplacer ?"
 
-#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:456
-#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:459
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:456 /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:459
 msgctxt "@info:status"
 msgid "Invalid file URL:"
 msgstr "URL de fichier invalide :"
 
-#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:713
-#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:713 /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
 msgctxt "@label"
 msgid "Nozzle"
 msgstr "Buse"
@@ -454,8 +431,7 @@ msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr "Échec de l'importation du profil depuis le fichier <filename>{0}</filename> :"
 
-#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:235
-#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:245
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:235 /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:245
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
@@ -527,27 +503,22 @@ msgctxt "@info:No intent profile selected"
 msgid "Default"
 msgstr "Default"
 
-#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
-#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:24
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67 /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:24
 msgctxt "@info:status"
 msgid "Finding new location for objects"
 msgstr "Recherche d'un nouvel emplacement pour les objets"
 
-#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
-#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:28
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71 /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:28
 msgctxt "@info:title"
 msgid "Finding Location"
 msgstr "Recherche d'emplacement"
 
-#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150
-#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:41
-#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:76
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150 /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:41 /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:76
 msgctxt "@info:status"
 msgid "Unable to find a location within the build volume for all objects"
 msgstr "Impossible de trouver un emplacement dans le volume d'impression pour tous les objets"
 
-#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
-#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:42
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151 /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:42
 msgctxt "@info:title"
 msgid "Can't Find Location"
 msgstr "Impossible de trouver un emplacement"
@@ -558,30 +529,23 @@ msgctxt "@label"
 msgid "Group #{group_nr}"
 msgstr "Groupe nº {group_nr}"
 
-#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WhatsNewPagesModel.py:55
-#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:268
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WhatsNewPagesModel.py:55 /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:268
 msgctxt "@action:button"
 msgid "Skip"
 msgstr "Passer"
 
-#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WhatsNewPagesModel.py:60
-#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
-#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
-#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:174
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:127
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WhatsNewPagesModel.py:60 /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185 /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128 /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:174 /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:127
 msgctxt "@action:button"
 msgid "Close"
 msgstr "Fermer"
 
-#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:56
-#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:259
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:56 /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:259
 msgctxt "@action:button"
 msgid "Next"
 msgstr "Suivant"
 
-#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:272
-#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:26
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:272 /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:26
 msgctxt "@action:button"
 msgid "Finish"
 msgstr "Fin"
@@ -646,23 +610,14 @@ msgctxt "@tooltip"
 msgid "Other"
 msgstr "Autre"
 
-#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:17
-#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:48
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:17 /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67 /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:48
 msgctxt "@action:button"
 msgid "Add"
 msgstr "Ajouter"
 
-#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:33
-#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
-#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
-#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
-#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
-#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
-#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:445
-#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
-#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:234
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:82
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:33 /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81 /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58 /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352 /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:445 /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150 /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:234 /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:82
 #: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292
 msgctxt "@action:button"
 msgid "Cancel"
@@ -683,9 +638,7 @@ msgctxt "@info:backup_failed"
 msgid "Could not create archive from user data directory: {}"
 msgstr "Impossible de créer une archive à partir du répertoire de données de l'utilisateur : {}"
 
-#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:119
-#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107
-#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:119 /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107 /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
 msgctxt "@info:title"
 msgid "Backup"
 msgstr "Sauvegarde"
@@ -726,8 +679,7 @@ msgctxt "@item:inlistbox"
 msgid "Save to Removable Drive {0}"
 msgstr "Enregistrer sur un lecteur amovible {0}"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
-#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66 /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
 msgctxt "@info:status"
 msgid "There are no file formats available to write with!"
 msgstr "Aucun format de fichier n'est disponible pour écriture !"
@@ -743,8 +695,7 @@ msgctxt "@info:title"
 msgid "Saving"
 msgstr "Enregistrement"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106
-#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106 /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
@@ -756,8 +707,7 @@ msgctxt "@info:status Don't translate the tag {device}!"
 msgid "Could not find a file name when trying to write to {device}."
 msgstr "Impossible de trouver un nom de fichier lors d'une tentative d'écriture sur {device}."
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138
-#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138 /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Could not save to removable drive {0}: {1}"
@@ -812,9 +762,7 @@ msgctxt "@item:inlistbox"
 msgid "AMF File"
 msgstr "Fichier AMF"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeProfileReader/__init__.py:14
-#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/__init__.py:14
-#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/__init__.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeProfileReader/__init__.py:14 /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/__init__.py:14 /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/__init__.py:16
 msgctxt "@item:inlistbox"
 msgid "G-code File"
 msgstr "Fichier GCode"
@@ -834,8 +782,7 @@ msgctxt "@button"
 msgid "Decline"
 msgstr "Refuser"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10 /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
 msgctxt "@button"
 msgid "Agree"
 msgstr "Accepter"
@@ -860,8 +807,7 @@ msgctxt "@info:generic"
 msgid "Syncing..."
 msgstr "Synchronisation..."
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93
-#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93 /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
 msgctxt "@info:title"
 msgid "Changes detected from your Ultimaker account"
 msgstr "Changements détectés à partir de votre compte Ultimaker"
@@ -906,12 +852,8 @@ msgctxt "@info:status"
 msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
 msgstr "Impossible de découper le matériau actuel, car celui-ci est incompatible avec la machine ou la configuration sélectionnée."
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:382
-#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:413
-#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437
-#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:446
-#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
-#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:382 /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:413 /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437 /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:446
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455 /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
 msgctxt "@info:title"
 msgid "Unable to slice"
 msgstr "Impossible de découper"
@@ -952,8 +894,7 @@ msgstr ""
 "- Sont affectés à un extrudeur activé\n"
 "- N sont pas tous définis comme des mailles de modificateur"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
-#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52 /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
 msgctxt "@info:status"
 msgid "Processing Layers"
 msgstr "Traitement des couches"
@@ -998,8 +939,7 @@ msgctxt "@message"
 msgid "Print in Progress"
 msgstr "Impression en cours"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraProfileWriter/__init__.py:14
-#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraProfileReader/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraProfileWriter/__init__.py:14 /mnt/projects/ultimaker/cura/Cura/plugins/CuraProfileReader/__init__.py:14
 msgctxt "@item:inlistbox"
 msgid "Cura Profile"
 msgstr "Profil Cura"
@@ -1049,8 +989,7 @@ msgid_plural "These printers are not linked to the Digital Factory:"
 msgstr[0] "Cette imprimante n'est pas associée à Digital Factory :"
 msgstr[1] "Ces imprimantes ne sont pas associées à Digital Factory :"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329
-#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329 /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
 msgstr "Ultimaker Digital Factory"
@@ -1304,8 +1243,7 @@ msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
 msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
 msgstr "Le fichier de projet <filename>{0}</filename> est soudainement inaccessible : <message>{1}</message>."
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:635
-#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:642
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:635 /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:642
 msgctxt "@info:title"
 msgid "Can't Open Project File"
 msgstr "Impossible d'ouvrir le fichier de projet"
@@ -1322,14 +1260,12 @@ msgctxt "@info:error Don't translate the XML tag <filename>!"
 msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
 msgstr "Le fichier de projet <filename>{0}</filename> a été réalisé en utilisant des profils inconnus de cette version d'Ultimaker Cura."
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/__init__.py:27
-#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/__init__.py:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/__init__.py:27 /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/__init__.py:33
 msgctxt "@item:inlistbox"
 msgid "3MF File"
 msgstr "Fichier 3MF"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzWriter/__init__.py:17
-#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzReader/__init__.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzWriter/__init__.py:17 /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzReader/__init__.py:17
 msgctxt "@item:inlistbox"
 msgid "Compressed G-code File"
 msgstr "Fichier G-Code compressé"
@@ -1390,8 +1326,7 @@ msgctxt "@info:status"
 msgid "Parsing G-code"
 msgstr "Analyse du G-Code"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:349
-#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:503
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:349 /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:503
 msgctxt "@info:title"
 msgid "G-code Details"
 msgstr "Détails G-Code"
@@ -1441,8 +1376,7 @@ msgctxt "@item:inlistbox"
 msgid "Compressed COLLADA Digital Asset Exchange"
 msgstr "COLLADA Digital Asset Exchange compressé"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPReader/__init__.py:22
-#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPWriter/__init__.py:28
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPReader/__init__.py:22 /mnt/projects/ultimaker/cura/Cura/plugins/UFPWriter/__init__.py:28
 msgctxt "@item:inlistbox"
 msgid "Ultimaker Format Package"
 msgstr "Ultimaker Format Package"
@@ -1487,8 +1421,7 @@ msgctxt "@error:zip"
 msgid "3MF Writer plug-in is corrupt."
 msgstr "Le plug-in 3MF Writer est corrompu."
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59
-#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59 /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
 msgctxt "@error:zip"
 msgid "No permission to write the workspace here."
 msgstr "Aucune autorisation d'écrire l'espace de travail ici."
@@ -1528,8 +1461,7 @@ msgctxt "@info:title"
 msgid "No layers to show"
 msgstr "Pas de couches à afficher"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:127
-#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:74
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:127 /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:74
 msgctxt "@info:option_text"
 msgid "Do not show this message again"
 msgstr "Ne plus afficher ce message"
@@ -1569,8 +1501,7 @@ msgctxt "@error:not supported"
 msgid "GCodeWriter does not support non-text mode."
 msgstr "GCodeWriter ne prend pas en charge le mode non-texte."
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:80
-#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:80 /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:96
 msgctxt "@warning:status"
 msgid "Please prepare G-code before exporting."
 msgstr "Veuillez préparer le G-Code avant d'exporter."
@@ -1600,8 +1531,7 @@ msgctxt "@item:inlistbox"
 msgid "GIF Image"
 msgstr "Image GIF"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DriveApiService.py:86
-#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DriveApiService.py:86 /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
 msgctxt "@info:backup_status"
 msgid "There was an error trying to restore your backup."
 msgstr "Une erreur s’est produite lors de la tentative de restauration de votre sauvegarde."
@@ -1741,9 +1671,7 @@ msgctxt "@button"
 msgid "Dismiss"
 msgstr "Ignorer"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:182
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23 /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123 /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:182
 #: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
 msgctxt "@button"
 msgid "Next"
@@ -1814,8 +1742,7 @@ msgctxt "@label"
 msgid "Last updated"
 msgstr "Dernière mise à jour"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103 /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
 msgctxt "@label"
 msgid "Brand"
 msgstr "Marque"
@@ -1870,10 +1797,7 @@ msgctxt "@description"
 msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
 msgstr "Veuillez vous connecter pour obtenir les plug-ins et matériaux vérifiés pour Ultimaker Cura Enterprise"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
-#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:199
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:53
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39 /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51 /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:199 /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:53
 msgctxt "@button"
 msgid "Sign in"
 msgstr "Se connecter"
@@ -1933,9 +1857,7 @@ msgctxt "@title:tab"
 msgid "Plugins"
 msgstr "Plug-ins"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:457
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44 /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89 /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:457
 msgctxt "@title:tab"
 msgid "Materials"
 msgstr "Matériaux"
@@ -1945,8 +1867,7 @@ msgctxt "@title:tab"
 msgid "Installed"
 msgstr "Installé"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
-#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86 /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
 msgctxt "@info:tooltip"
 msgid "Go to Web Marketplace"
 msgstr "Aller sur le Marché en ligne"
@@ -1956,20 +1877,17 @@ msgctxt "@label"
 msgid "Will install upon restarting"
 msgstr "S'installera au redémarrage"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
-#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34 /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
 msgctxt "@action:button"
 msgid "Update"
 msgstr "Mise à jour"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
-#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35 /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
 msgctxt "@action:button"
 msgid "Updating"
 msgstr "Mise à jour"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
-#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36 /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
 msgctxt "@action:button"
 msgid "Updated"
 msgstr "Mis à jour"
@@ -1989,8 +1907,7 @@ msgctxt "@action:button"
 msgid "Uninstall"
 msgstr "Désinstaller"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
-#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46 /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
 msgctxt "@action:button"
 msgid "Installed"
 msgstr "Installé"
@@ -2080,8 +1997,7 @@ msgctxt "@title:window"
 msgid "Select Settings to Customize for this model"
 msgstr "Sélectionner les paramètres pour personnaliser ce modèle"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55 /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
 msgctxt "@label:textbox"
 msgid "Filter..."
 msgstr "Filtrer..."
@@ -2200,9 +2116,7 @@ msgctxt "@label"
 msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
 msgstr "Si vous sélectionnez « Remplacer », les paramètres de la configuration actuelle de l'imprimante seront utilisés. Cela peut entraîner l'échec de l'impression."
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
-#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
-#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153 /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184 /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
 msgctxt "@label"
 msgid "Glass"
 msgstr "Verre"
@@ -2222,9 +2136,7 @@ msgctxt "@label"
 msgid "First available"
 msgstr "Premier disponible"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
-#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
-#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:523
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250 /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254 /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:523
 msgctxt "@info"
 msgid "Please update your printer's firmware to manage the queue remotely."
 msgstr "Veuillez mettre à jour le Firmware de votre imprimante pour gérer la file d'attente à distance."
@@ -2249,9 +2161,7 @@ msgctxt "@action:button"
 msgid "Edit"
 msgstr "Modifier"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88 /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156 /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:55
 #: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:138
 msgctxt "@action:button"
 msgid "Remove"
@@ -2267,20 +2177,17 @@ msgctxt "@label"
 msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
 msgstr "Si votre imprimante n'apparaît pas dans la liste, lisez le <a href='%1'>guide de dépannage de l'impression en réseau</a>"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205 /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
 msgctxt "@label"
 msgid "Type"
 msgstr "Type"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225 /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
 msgctxt "@label"
 msgid "Firmware version"
 msgstr "Version du firmware"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239 /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
 msgctxt "@label"
 msgid "Address"
 msgstr "Adresse"
@@ -2310,8 +2217,7 @@ msgctxt "@title:window"
 msgid "Invalid IP address"
 msgstr "Adresse IP non valide"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297 /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
 msgctxt "@text"
 msgid "Please enter a valid IP address."
 msgstr "Veuillez saisir une adresse IP valide."
@@ -2321,15 +2227,12 @@ msgctxt "@title:window"
 msgid "Printer Address"
 msgstr "Adresse de l'imprimante"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331 /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
 msgctxt "@label"
 msgid "Enter the IP address of your printer on the network."
 msgstr "Saisissez l'adresse IP de votre imprimante sur le réseau."
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
-#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
-#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:227
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361 /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139 /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:227
 msgctxt "@action:button"
 msgid "OK"
 msgstr "OK"
@@ -2359,8 +2262,7 @@ msgctxt "@label"
 msgid "Delete"
 msgstr "Effacer"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:290
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100 /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:290
 msgctxt "@label"
 msgid "Resume"
 msgstr "Reprendre"
@@ -2375,9 +2277,7 @@ msgctxt "@label"
 msgid "Resuming..."
 msgstr "Reprise..."
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:285
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:294
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106 /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:285 /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:294
 msgctxt "@label"
 msgid "Pause"
 msgstr "Pause"
@@ -2417,27 +2317,22 @@ msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to abort %1?"
 msgstr "Êtes-vous sûr de vouloir annuler %1 ?"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:336
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164 /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:336
 msgctxt "@window:title"
 msgid "Abort print"
 msgstr "Abandonner l'impression"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
-#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78 /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
 msgctxt "@label:status"
 msgid "Aborted"
 msgstr "Abandonné"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
-#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80 /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
 msgctxt "@label:status"
 msgid "Finished"
 msgstr "Terminé"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
-#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
-#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:364
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84 /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86 /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:364
 msgctxt "@label:status"
 msgid "Preparing..."
 msgstr "Préparation..."
@@ -2572,14 +2467,12 @@ msgctxt "@action:ComboBox Save settings in a new profile"
 msgid "Create new"
 msgstr "Créer"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:75
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:75 /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
 msgctxt "@action:title"
 msgid "Summary - Cura Project"
 msgstr "Résumé - Projet Cura"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:97
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:97 /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
 msgctxt "@action:label"
 msgid "Printer settings"
 msgstr "Paramètres de l'imprimante"
@@ -2589,20 +2482,17 @@ msgctxt "@info:tooltip"
 msgid "How should the conflict in the machine be resolved?"
 msgstr "Comment le conflit de la machine doit-il être résolu ?"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:167 /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
 msgctxt "@action:label"
 msgid "Type"
 msgstr "Type"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:183
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:183 /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
 msgctxt "@action:label"
 msgid "Printer Group"
 msgstr "Groupe d'imprimantes"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:205
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:205 /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
 msgctxt "@action:label"
 msgid "Profile settings"
 msgstr "Paramètres de profil"
@@ -2612,28 +2502,22 @@ msgctxt "@info:tooltip"
 msgid "How should the conflict in the profile be resolved?"
 msgstr "Comment le conflit du profil doit-il être résolu ?"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
-#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:353
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:242 /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:353 /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117 /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242
 msgctxt "@action:label"
 msgid "Name"
 msgstr "Nom"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:258
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:258 /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
 msgctxt "@action:label"
 msgid "Intent"
 msgstr "Intent"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:274
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:274 /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
 msgctxt "@action:label"
 msgid "Not in profile"
 msgstr "Absent du profil"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:279
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:279 /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
 msgctxt "@action:label"
 msgid "%1 override"
 msgid_plural "%1 overrides"
@@ -2739,8 +2623,7 @@ msgctxt "@text:window"
 msgid "Allow sending anonymous data"
 msgstr "Autoriser l'envoi de données anonymes"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
-#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20 /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
 msgctxt "@label"
 msgid "Color scheme"
 msgstr "Modèle de couleurs"
@@ -2790,8 +2673,7 @@ msgctxt "@label"
 msgid "Shell"
 msgstr "Coque"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:255
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:255 /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
 msgctxt "@label"
 msgid "Infill"
 msgstr "Remplissage"
@@ -2841,18 +2723,10 @@ msgctxt "@label"
 msgid "Nozzle size"
 msgstr "Taille de la buse"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
-#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
-#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
-#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
-#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
-#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
-#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
-#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
-#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
-#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
-#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
-#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79 /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93 /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124 /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74 /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104 /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205 /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245 /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265 /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
 msgctxt "@label"
 msgid "mm"
 msgstr "mm"
@@ -3057,8 +2931,7 @@ msgctxt "@item:inlistbox"
 msgid "Linear"
 msgstr "Linéaire"
 
-#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:161
-#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:172
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:161 /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:172
 msgctxt "@item:inlistbox"
 msgid "Translucency"
 msgstr "Translucidité"
@@ -3193,8 +3066,7 @@ msgctxt "@label:category menu label"
 msgid "Generic"
 msgstr "Générique"
 
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:13
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:13 /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
 msgctxt "@title:menu menubar:toplevel"
 msgid "&File"
 msgstr "&Fichier"
@@ -3279,8 +3151,7 @@ msgctxt "@label"
 msgid "The configurations are not available because the printer is disconnected."
 msgstr "Les configurations ne sont pas disponibles car l'imprimante est déconnectée."
 
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:12
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:12 /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
 msgctxt "@title:menu menubar:toplevel"
 msgid "&View"
 msgstr "&Visualisation"
@@ -3335,8 +3206,7 @@ msgctxt "@action:inmenu"
 msgid "Manage Setting Visibility..."
 msgstr "Gérer la visibilité des paramètres..."
 
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:13
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:13 /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51
 msgctxt "@title:menu menubar:toplevel"
 msgid "&Settings"
 msgstr "&Paramètres"
@@ -3400,8 +3270,7 @@ msgctxt "@label:header"
 msgid "Custom profiles"
 msgstr "Personnaliser les profils"
 
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:564
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244 /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:564
 msgctxt "@action:button"
 msgid "Discard current changes"
 msgstr "Ignorer les modifications actuelles"
@@ -3447,8 +3316,7 @@ msgctxt "@button"
 msgid "Custom"
 msgstr "Personnalisé"
 
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19 /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
 msgctxt "@label"
 msgid "Print settings"
 msgstr "Paramètres d'impression"
@@ -3468,8 +3336,7 @@ msgctxt "@label"
 msgid "Gradual infill will gradually increase the amount of infill towards the top."
 msgstr "Un remplissage graduel augmentera la quantité de remplissage vers le haut."
 
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:728
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52 /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:728
 msgctxt "@label"
 msgid "Profiles"
 msgstr "Profils"
@@ -3557,8 +3424,7 @@ msgctxt "@title:column"
 msgid "Current changes"
 msgstr "Modifications actuelles"
 
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:747
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158 /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:747
 msgctxt "@option:discardOrKeep"
 msgid "Always ask me this"
 msgstr "Toujours me demander"
@@ -3707,8 +3573,7 @@ msgctxt "@Label"
 msgid "Static type checker for Python"
 msgstr "Vérificateur de type statique pour Python"
 
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:156
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:157
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:156 /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:157
 msgctxt "@Label"
 msgid "Root Certificates for validating SSL trustworthiness"
 msgstr "Certificats racines pour valider la fiabilité SSL"
@@ -3753,8 +3618,7 @@ msgctxt "@label"
 msgid "Linux cross-distribution application deployment"
 msgstr "Déploiement d'applications sur multiples distributions Linux"
 
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:627
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19 /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:627
 msgctxt "@title:window"
 msgid "Open file(s)"
 msgstr "Ouvrir le(s) fichier(s)"
@@ -3837,7 +3701,9 @@ msgstr "Bienvenue dans Ultimaker Cura"
 #: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
 msgctxt "@text"
 msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
-msgstr "Veuillez suivre ces étapes pour configurer\nUltimaker Cura. Cela ne prendra que quelques instants."
+msgstr ""
+"Veuillez suivre ces étapes pour configurer\n"
+"Ultimaker Cura. Cela ne prendra que quelques instants."
 
 #: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
 msgctxt "@button"
@@ -3909,8 +3775,7 @@ msgctxt "@label"
 msgid "Could not connect to device."
 msgstr "Impossible de se connecter à l'appareil."
 
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207 /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
 msgctxt "@label"
 msgid "Can't connect to your Ultimaker printer?"
 msgstr "Impossible de vous connecter à votre imprimante Ultimaker ?"
@@ -3980,8 +3845,7 @@ msgctxt "@button"
 msgid "Add printer manually"
 msgstr "Ajouter l'imprimante manuellement"
 
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:64
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:20
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:64 /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:20
 msgctxt "@label"
 msgid "Sign in to the Ultimaker platform"
 msgstr "Connectez-vous à la plateforme Ultimaker"
@@ -4092,8 +3956,7 @@ msgid ""
 "- Add material profiles and plug-ins from the Marketplace\n"
 "- Back-up and sync your material profiles and plug-ins\n"
 "- Share ideas and get help from 48,000+ users in the Ultimaker community"
-msgstr "- Ajoutez des profils de matériaux et des plug-ins à partir de la Marketplace - Sauvegardez et synchronisez vos profils de matériaux et vos plug-ins -"
-" Partagez vos idées et obtenez l'aide de plus de 48 000 utilisateurs de la communauté Ultimaker"
+msgstr "- Ajoutez des profils de matériaux et des plug-ins à partir de la Marketplace - Sauvegardez et synchronisez vos profils de matériaux et vos plug-ins - Partagez vos idées et obtenez l'aide de plus de 48 000 utilisateurs de la communauté Ultimaker"
 
 #: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:62
 msgctxt "@button"
@@ -4355,8 +4218,7 @@ msgctxt "@action:inmenu menubar:help"
 msgid "Show Configuration Folder"
 msgstr "Afficher le dossier de configuration"
 
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:445
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:538
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:445 /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:538
 msgctxt "@action:menu"
 msgid "Configure setting visibility..."
 msgstr "Configurer la visibilité des paramètres..."
@@ -4476,9 +4338,7 @@ msgctxt "@label"
 msgid "Adhesion Information"
 msgstr "Informations d'adhérence"
 
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:40
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:84
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108 /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:40 /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:84
 msgctxt "@action:button"
 msgid "Activate"
 msgstr "Activer"
@@ -4493,14 +4353,12 @@ msgctxt "@action:button"
 msgid "Duplicate"
 msgstr "Dupliquer"
 
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:167
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171 /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:167
 msgctxt "@action:button"
 msgid "Import"
 msgstr "Importer"
 
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:179
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185 /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:179
 msgctxt "@action:button"
 msgid "Export"
 msgstr "Exporter"
@@ -4510,20 +4368,17 @@ msgctxt "@action:label"
 msgid "Printer"
 msgstr "Imprimante"
 
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:277
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298 /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:277
 msgctxt "@title:window"
 msgid "Confirm Remove"
 msgstr "Confirmer la suppression"
 
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:278
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301 /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:278
 msgctxt "@label (%1 is object name)"
 msgid "Are you sure you wish to remove %1? This cannot be undone!"
 msgstr "Êtes-vous sûr de vouloir supprimer l'objet %1 ? Vous ne pourrez pas revenir en arrière !"
 
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315 /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
 msgctxt "@title:window"
 msgid "Import Material"
 msgstr "Importer un matériau"
@@ -4538,8 +4393,7 @@ msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Successfully imported material <filename>%1</filename>"
 msgstr "Matériau <filename>%1</filename> importé avec succès"
 
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346 /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
 msgctxt "@title:window"
 msgid "Export Material"
 msgstr "Exporter un matériau"
@@ -4554,20 +4408,17 @@ msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Successfully exported material to <filename>%1</filename>"
 msgstr "Matériau exporté avec succès vers <filename>%1</filename>"
 
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:16
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:455
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:16 /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:455
 msgctxt "@title:tab"
 msgid "Printers"
 msgstr "Imprimantes"
 
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:63
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:152
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:63 /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:152
 msgctxt "@action:button"
 msgid "Rename"
 msgstr "Renommer"
 
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:34
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:459
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:34 /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:459
 msgctxt "@title:tab"
 msgid "Profiles"
 msgstr "Profils"
@@ -4647,8 +4498,7 @@ msgctxt "@label:textbox"
 msgid "Check all"
 msgstr "Vérifier tout"
 
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:15
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:450
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:15 /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:450
 msgctxt "@title:tab"
 msgid "General"
 msgstr "Général"
@@ -5139,14 +4989,12 @@ msgctxt "@tooltip of temperature input"
 msgid "The temperature to pre-heat the hotend to."
 msgstr "Température jusqu'à laquelle préchauffer l'extrémité chauffante."
 
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341 /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
 msgctxt "@button Cancel pre-heating"
 msgid "Cancel"
 msgstr "Annuler"
 
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344 /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
 msgctxt "@button"
 msgid "Pre-heat"
 msgstr "Préchauffer"
@@ -5313,8 +5161,7 @@ msgctxt "@title:window %1 is the application name"
 msgid "Closing %1"
 msgstr "Fermeture de %1"
 
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:577
-#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:589
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:577 /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:589
 msgctxt "@label %1 is the application name"
 msgid "Are you sure you want to exit %1?"
 msgstr "Voulez-vous vraiment quitter %1 ?"
diff --git a/resources/i18n/fr_FR/fdmextruder.def.json.po b/resources/i18n/fr_FR/fdmextruder.def.json.po
index da9486c18c..1d8ba7a960 100644
--- a/resources/i18n/fr_FR/fdmextruder.def.json.po
+++ b/resources/i18n/fr_FR/fdmextruder.def.json.po
@@ -7,13 +7,14 @@ msgstr ""
 "Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
 "POT-Creation-Date: 2021-04-02 16:09+0000\n"
-"PO-Revision-Date: 2019-03-13 14:00+0200\n"
+"PO-Revision-Date: 2021-04-16 15:16+0200\n"
 "Last-Translator: Bothof <info@bothof.nl>\n"
 "Language-Team: French\n"
 "Language: fr_FR\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
+"X-Generator: Poedit 2.4.1\n"
 
 #: fdmextruder.def.json
 msgctxt "machine_settings label"
diff --git a/resources/i18n/fr_FR/fdmprinter.def.json.po b/resources/i18n/fr_FR/fdmprinter.def.json.po
index e30798bfd1..942f44de68 100644
--- a/resources/i18n/fr_FR/fdmprinter.def.json.po
+++ b/resources/i18n/fr_FR/fdmprinter.def.json.po
@@ -7,14 +7,14 @@ msgstr ""
 "Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
 "POT-Creation-Date: 2021-04-02 16:09+0000\n"
-"PO-Revision-Date: 2020-08-21 13:40+0200\n"
+"PO-Revision-Date: 2021-04-16 15:16+0200\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: French <info@lionbridge.com>, French <info@bothof.nl>\n"
 "Language: fr_FR\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Poedit 2.0.6\n"
+"X-Generator: Poedit 2.4.1\n"
 
 #: fdmprinter.def.json
 msgctxt "machine_settings label"
@@ -427,9 +427,7 @@ msgstr "Les extrudeuses partagent la buse"
 #: fdmprinter.def.json
 msgctxt "machine_extruders_share_nozzle description"
 msgid "Whether the extruders share a single nozzle rather than each extruder having its own nozzle. When set to true, it is expected that the printer-start gcode script properly sets up all extruders in an initial retraction state that is known and mutually compatible (either zero or one filament not retracted); in that case the initial retraction status is described, per extruder, by the 'machine_extruders_shared_nozzle_initial_retraction' parameter."
-msgstr "Lorsque les extrudeuses partagent une seule buse au lieu que chaque extrudeuse ait sa propre buse. Lorsqu'il est défini à true, le script gcode de démarrage"
-" de l'imprimante doit configurer correctement toutes les extrudeuses dans un état de rétraction initial connu et mutuellement compatible (zéro ou un filament"
-" non rétracté) ; dans ce cas, l'état de rétraction initial est décrit, par extrudeuse, par le paramètre 'machine_extruders_shared_nozzle_initial_retraction'."
+msgstr "Lorsque les extrudeuses partagent une seule buse au lieu que chaque extrudeuse ait sa propre buse. Lorsqu'il est défini à true, le script gcode de démarrage de l'imprimante doit configurer correctement toutes les extrudeuses dans un état de rétraction initial connu et mutuellement compatible (zéro ou un filament non rétracté) ; dans ce cas, l'état de rétraction initial est décrit, par extrudeuse, par le paramètre 'machine_extruders_shared_nozzle_initial_retraction'."
 
 #: fdmprinter.def.json
 msgctxt "machine_extruders_shared_nozzle_initial_retraction label"
@@ -439,8 +437,7 @@ msgstr "Rétraction initiale de la buse partagée"
 #: fdmprinter.def.json
 msgctxt "machine_extruders_shared_nozzle_initial_retraction description"
 msgid "How much the filament of each extruder is assumed to have been retracted from the shared nozzle tip at the completion of the printer-start gcode script; the value should be equal to or greater than the length of the common part of the nozzle's ducts."
-msgstr "La quantité de filament de chaque extrudeuse qui est supposée avoir été rétractée de l'extrémité de la buse partagée à la fin du script gcode de démarrage"
-" de l'imprimante ; la valeur doit être égale ou supérieure à la longueur de la partie commune des conduits de la buse."
+msgstr "La quantité de filament de chaque extrudeuse qui est supposée avoir été rétractée de l'extrémité de la buse partagée à la fin du script gcode de démarrage de l'imprimante ; la valeur doit être égale ou supérieure à la longueur de la partie commune des conduits de la buse."
 
 #: fdmprinter.def.json
 msgctxt "machine_disallowed_areas label"
@@ -1655,10 +1652,7 @@ msgstr "Angle maximum de la couche extérieure pour l'expansion"
 #: fdmprinter.def.json
 msgctxt "max_skin_angle_for_expansion description"
 msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal and will cause no skin to be expanded, while an angle of 90° is vertical and will cause all skin to be expanded."
-msgstr "Les couches extérieures supérieures / inférieures des surfaces supérieures et / ou inférieures de votre objet possédant un angle supérieur à ce paramètre"
-" ne seront pas étendues. Cela permet d'éviter d'étendre les zones de couche extérieure étroites qui sont créées lorsque la surface du modèle possède une"
-" pente proche de la verticale. Un angle de 0° est horizontal et évitera l'extension des couches ; un angle de 90° est vertical et entraînera l'extension"
-" de toutes les couches."
+msgstr "Les couches extérieures supérieures / inférieures des surfaces supérieures et / ou inférieures de votre objet possédant un angle supérieur à ce paramètre ne seront pas étendues. Cela permet d'éviter d'étendre les zones de couche extérieure étroites qui sont créées lorsque la surface du modèle possède une pente proche de la verticale. Un angle de 0° est horizontal et évitera l'extension des couches ; un angle de 90° est vertical et entraînera l'extension de toutes les couches."
 
 #: fdmprinter.def.json
 msgctxt "min_skin_width_for_expansion label"
@@ -2597,8 +2591,7 @@ msgstr "Vitesse de la couche initiale"
 #: fdmprinter.def.json
 msgctxt "speed_layer_0 description"
 msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate. Does not affect the build plate adhesion structures themselves, like brim and raft."
-msgstr "La vitesse de la couche initiale. Une valeur plus faible est recommandée pour améliorer l'adhérence au plateau de fabrication. N'affecte pas les structures"
-" d'adhérence au plateau, comme la bordure et le radeau."
+msgstr "La vitesse de la couche initiale. Une valeur plus faible est recommandée pour améliorer l'adhérence au plateau de fabrication. N'affecte pas les structures d'adhérence au plateau, comme la bordure et le radeau."
 
 #: fdmprinter.def.json
 msgctxt "speed_print_layer_0 label"
@@ -5112,9 +5105,7 @@ msgstr "Rang de traitement du maillage"
 #: fdmprinter.def.json
 msgctxt "infill_mesh_order description"
 msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the highest rank. An infill mesh with a higher rank will modify the infill of infill meshes with lower rank and normal meshes."
-msgstr "Détermine la priorité de cette maille lorsque plusieurs chevauchements de mailles de remplissage sont pris en considération. Les zones comportant plusieurs"
-" chevauchements de mailles de remplissage prendront en compte les paramètres du maillage ayant l'ordre le plus élevé. Une maille de remplissage possédant"
-" un ordre plus élevé modifiera le remplissage des mailles de remplissage ayant un ordre plus bas et des mailles normales."
+msgstr "Détermine la priorité de cette maille lorsque plusieurs chevauchements de mailles de remplissage sont pris en considération. Les zones comportant plusieurs chevauchements de mailles de remplissage prendront en compte les paramètres du maillage ayant l'ordre le plus élevé. Une maille de remplissage possédant un ordre plus élevé modifiera le remplissage des mailles de remplissage ayant un ordre plus bas et des mailles normales."
 
 #: fdmprinter.def.json
 msgctxt "cutting_mesh label"
@@ -5469,8 +5460,7 @@ msgstr "Surface maximale du trou en porte-à-faux"
 #: fdmprinter.def.json
 msgctxt "conical_overhang_hole_size description"
 msgid "The maximum area of a hole in the base of the model before it's removed by Make Overhang Printable.  Holes smaller than this will be retained.  A value of 0 mm² will fill all holes in the models base."
-msgstr "Zone maximale d'un trou dans la base du modèle avant d'être retirée par l'outil Rendre le porte-à-faux imprimable.  Les trous plus petits seront conservés."
-"  Une valeur de 0 mm² remplira tous les trous dans la base des modèles."
+msgstr "Zone maximale d'un trou dans la base du modèle avant d'être retirée par l'outil Rendre le porte-à-faux imprimable.  Les trous plus petits seront conservés.  Une valeur de 0 mm² remplira tous les trous dans la base des modèles."
 
 #: fdmprinter.def.json
 msgctxt "coasting_enable label"