Update translation files with new strings in Cura 4.6

Contributes to issue CURA-7344.

1 files changed, 4179 insertions, 4060 deletions

diff --git a/resources/i18n/pl_PL/cura.po b/resources/i18n/pl_PL/cura.po
index a9d53b735e..f277b3a344 100644
--- a/resources/i18n/pl_PL/cura.po
+++ b/resources/i18n/pl_PL/cura.po
@@ -5,8 +5,8 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.5\n"
-"Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-02-07 14:19+0100\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-04-06 16:33+0200\n"
 "PO-Revision-Date: 2019-11-15 15:23+0100\n"
 "Last-Translator: Mariusz Matłosz <matliks@gmail.com>\n"
 "Language-Team: Mariusz Matłosz <matliks@gmail.com>, reprapy.pl\n"
@@ -18,3111 +18,3369 @@ msgstr ""
 "X-Generator: Poedit 2.2.4\n"
 "X-Poedit-SourceCharset: UTF-8\n"
 
-#: /home/ruben/Projects/Cura/plugins/CuraProfileReader/__init__.py:14
-#: /home/ruben/Projects/Cura/plugins/CuraProfileWriter/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura Profile"
-msgstr "Profile Cura"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:85
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:104
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:340
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1490
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:188
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:229
+msgctxt "@label"
+msgid "Unknown"
+msgstr "Nieznany"
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "JPG Image"
-msgstr "Obraz JPG"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
+msgctxt "@label"
+msgid "The printer(s) below cannot be connected because they are part of a group"
+msgstr "Poniższa drukarka nie może być podłączona, ponieważ jest częścią grupy"
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "JPEG Image"
-msgstr "Obraz JPEG"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:117
+msgctxt "@label"
+msgid "Available networked printers"
+msgstr "Dostępne drukarki sieciowe"
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "PNG Image"
-msgstr "Obraz PNG"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/ExtrudersModel.py:208
+msgctxt "@menuitem"
+msgid "Not overridden"
+msgstr "Nie zastąpione"
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "BMP Image"
-msgstr "Obraz BMP"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:41
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:321
+msgctxt "@label"
+msgid "Default"
+msgstr "Domyślne"
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/__init__.py:30
-msgctxt "@item:inlistbox"
-msgid "GIF Image"
-msgstr "Obraz GIF"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:44
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:14
+msgctxt "@label"
+msgid "Visual"
+msgstr "Wizualny"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:30
-msgctxt "@action"
-msgid "Machine Settings"
-msgstr "Ustawienia drukarki"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:45
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:15
+msgctxt "@text"
+msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
+msgstr "Profil wizualny jest przeznaczony do drukowania prototypów i modeli z zamiarem podkreślenia wysokiej jakości wizualnej i powierzchni."
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Save to Removable Drive"
-msgstr "Zapisz na dysk wymienny"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:48
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:18
+msgctxt "@label"
+msgid "Engineering"
+msgstr "Inżynieria"
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
-#, python-brace-format
-msgctxt "@item:inlistbox"
-msgid "Save to Removable Drive {0}"
-msgstr "Zapisz na dysk wymienny {0}"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:49
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:19
+msgctxt "@text"
+msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
+msgstr "Profil inżynieryjny jest przeznaczony do drukowania prototypów funkcjonalnych i części końcowych z naciskiem na lepszą dokładność i lepszą tolerancję."
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:64
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:107
-msgctxt "@info:status"
-msgid "There are no file formats available to write with!"
-msgstr "Nie ma żadnych formatów plików do zapisania!"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:52
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:22
+msgctxt "@label"
+msgid "Draft"
+msgstr "Szkic"
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:94
-#, python-brace-format
-msgctxt "@info:progress Don't translate the XML tags <filename>!"
-msgid "Saving to Removable Drive <filename>{0}</filename>"
-msgstr "Zapisywanie na Dysk Wymienny <filename>{0}</filename>"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:53
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:23
+msgctxt "@text"
+msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
+msgstr "Profil szkicu służy do drukowania początkowych prototypów i weryfikacji koncepcji z naciskiem na krótki czasu drukowania."
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:94
-msgctxt "@info:title"
-msgid "Saving"
-msgstr "Zapisywanie"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:213
+msgctxt "@label"
+msgid "Custom Material"
+msgstr "Niestandardowy materiał"
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:104
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:107
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
-msgstr "Nie mogę zapisać do <filename>{0}</filename>: <message>{1}</message>"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:214
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
+msgctxt "@label"
+msgid "Custom"
+msgstr "Niestandardowy"
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:123
-#, python-brace-format
-msgctxt "@info:status Don't translate the tag {device}!"
-msgid "Could not find a file name when trying to write to {device}."
-msgstr "Nie mogę znaleźć nazwy pliku podczas próby zapisu do {device}."
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:359
+msgctxt "@label"
+msgid "Custom profiles"
+msgstr "Profile niestandardowe"
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:136
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:393
 #, python-brace-format
-msgctxt "@info:status"
-msgid "Could not save to removable drive {0}: {1}"
-msgstr "Nie można zapisać na wymiennym dysku {0}: {1}"
+msgctxt "@item:inlistbox"
+msgid "All Supported Types ({0})"
+msgstr "Wszystkie Wspierane Typy ({0})"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:394
+msgctxt "@item:inlistbox"
+msgid "All Files (*)"
+msgstr "Wszystkie Pliki (*)"
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:137
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:1697
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:138
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:145
+#: /home/trin/Gedeeld/Projects/Cura/cura/API/Account.py:81
 msgctxt "@info:title"
-msgid "Error"
-msgstr "Błąd"
+msgid "Login failed"
+msgstr "Logowanie nie powiodło się"
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:145
-#, python-brace-format
+#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:66
+#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:30
 msgctxt "@info:status"
-msgid "Saved to Removable Drive {0} as {1}"
-msgstr "Zapisano na dysk wymienny {0} jako {1}"
+msgid "Finding new location for objects"
+msgstr "Znajdowanie nowej lokalizacji obiektów"
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:145
+#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:70
+#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:34
 msgctxt "@info:title"
-msgid "File Saved"
-msgstr "Plik Zapisany"
-
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:146
-msgctxt "@action:button"
-msgid "Eject"
-msgstr "Wyjmij"
+msgid "Finding Location"
+msgstr "Szukanie Lokalizacji"
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:146
-#, python-brace-format
-msgctxt "@action"
-msgid "Eject removable device {0}"
-msgstr "Wyjmij urządzenie wymienne {0}"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:149
+#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:103
+#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:108
+msgctxt "@info:status"
+msgid "Unable to find a location within the build volume for all objects"
+msgstr "Nie można znaleźć lokalizacji w obrębie obszaru roboczego dla wszystkich obiektów"
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:1687
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:1787
-#: /home/ruben/Projects/Cura/cura/OAuth2/AuthorizationService.py:201
+#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150
+#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:104
 msgctxt "@info:title"
-msgid "Warning"
-msgstr "Ostrzeżenie"
+msgid "Can't Find Location"
+msgstr "Nie można Znaleźć Lokalizacji"
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Ejected {0}. You can now safely remove the drive."
-msgstr "Wyjęto {0}. Możesz teraz bezpiecznie wyjąć dysk."
+#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:99
+msgctxt "@info:backup_failed"
+msgid "Could not create archive from user data directory: {}"
+msgstr "Nie można utworzyć archiwum z folderu danych użytkownika: {}"
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
+#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:104
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
 msgctxt "@info:title"
-msgid "Safely Remove Hardware"
-msgstr "Bezpiecznie Odłącz Urządzenie"
+msgid "Backup"
+msgstr "Kopia zapasowa"
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
-#, python-brace-format
+#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:114
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup without having proper data or meta data."
+msgstr "Podjęto próbę przywrócenia kopii zapasowej Cura na podstawie niepoprawnych danych lub metadanych."
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:125
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup that is higher than the current version."
+msgstr "Próbowano przywrócić kopię zapasową Cura, nowszą od aktualnej wersji."
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:95
 msgctxt "@info:status"
-msgid "Failed to eject {0}. Another program may be using the drive."
-msgstr "Nie można wysunąć {0}. Inny program może używać dysku."
+msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
+msgstr "Wysokość obszaru roboczego została zmniejszona ze względu na wartość ustawienia Print Sequence (Sekwencja wydruku), aby zapobiec kolizji z wydrukowanymi modelami."
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:72
-msgctxt "@item:intext"
-msgid "Removable Drive"
-msgstr "Dysk wymienny"
+#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:97
+msgctxt "@info:title"
+msgid "Build Volume"
+msgstr "Obszar Roboczy"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:93
-msgctxt "@info:generic"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:107
+msgctxt "@title:window"
+msgid "Cura can't start"
+msgstr "Cura nie może się uruchomić"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:113
+msgctxt "@label crash message"
 msgid ""
-"\n"
-"Do you want to sync material and software packages with your account?"
+"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
+"                    <p>We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.</p>\n"
+"                    <p>Backups can be found in the configuration folder.</p>\n"
+"                    <p>Please send us this Crash Report to fix the problem.</p>\n"
+"                "
 msgstr ""
+"<p><b>Ups, Ultimaker Cura natrafiła coś co nie wygląda dobrze.</p></b>\n"
+"                    <p>Natrafiliśmy na nieodwracalny błąd podczas uruchamiania. Prawdopodobnie jest to spowodowane błędem w plikach konfiguracyjnych. Zalecamy backup i reset konfiguracji.</p>\n"
+"                    <p>Backupy mogą być znalezione w folderze konfiguracyjnym.</p>\n"
+"                    <p>Proszę wyślij do nas ten Raport Błędu, aby rozwiązać problem.</p>\n"
+"              "
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:94
-#: /home/ruben/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:90
-msgctxt "@info:title"
-msgid "Changes detected from your Ultimaker account"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:122
+msgctxt "@action:button"
+msgid "Send crash report to Ultimaker"
+msgstr "Wyślij raport błędu do Ultimaker"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:96
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:125
 msgctxt "@action:button"
-msgid "Sync"
-msgstr ""
+msgid "Show detailed crash report"
+msgstr "Pokaż szczegółowy raport błędu"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
-msgctxt "@button"
-msgid "Decline"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:129
+msgctxt "@action:button"
+msgid "Show configuration folder"
+msgstr "Pokaż folder konfiguracyjny"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
-msgctxt "@button"
-msgid "Agree"
-msgstr "Zgadzam się"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:140
+msgctxt "@action:button"
+msgid "Backup and Reset Configuration"
+msgstr "Zrób Backup i Zresetuj Konfigurację"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:169
 msgctxt "@title:window"
-msgid "Plugin License Agreement"
-msgstr "Akceptowanie Licencji Wtyczki"
+msgid "Crash Report"
+msgstr "Raport Błędu"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:30
-msgctxt "@button"
-msgid "Decline and remove from account"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:188
+msgctxt "@label crash message"
+msgid ""
+"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
+"            <p>Please use the \"Send report\" button to post a bug report automatically to our servers</p>\n"
+"        "
 msgstr ""
+"<p><b>Wystąpił błąd krytyczny. Proszę wyślij do nas ten Raport Błędu, aby rozwiązać problem</p></b>\n"
+"            <p>Proszę użyj przycisku \"Wyślij raport\", aby wysłać raport błędu automatycznie na nasze serwery</p>\n"
+"        "
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:71
-msgctxt "@info:generic"
-msgid "{} plugins failed to download"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:196
+msgctxt "@title:groupbox"
+msgid "System information"
+msgstr "Informacje o systemie"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:86
-msgctxt "@info:generic"
-msgid ""
-"\n"
-"Syncing..."
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:205
+msgctxt "@label unknown version of Cura"
+msgid "Unknown"
+msgstr "Nieznany"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:216
+msgctxt "@label Cura version number"
+msgid "Cura version"
+msgstr "Wersja Cura"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:217
+msgctxt "@label"
+msgid "Cura language"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:18
-msgctxt "@info:generic"
-msgid "You need to quit and restart {} before changes have effect."
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:218
+msgctxt "@label"
+msgid "OS language"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/AMFReader/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "AMF File"
-msgstr "Plik AMF"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:219
+msgctxt "@label Type of platform"
+msgid "Platform"
+msgstr "Platforma"
 
-#: /home/ruben/Projects/Cura/plugins/SolidView/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Solid view"
-msgstr "Widok modelu"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:220
+msgctxt "@label"
+msgid "Qt version"
+msgstr "Wersja Qt"
 
-#: /home/ruben/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:21
-msgctxt "@action"
-msgid "Level build plate"
-msgstr "Wypoziomuj stół"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:221
+msgctxt "@label"
+msgid "PyQt version"
+msgstr "Wersja PyQt"
 
-#: /home/ruben/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:18
-msgctxt "@action"
-msgid "Select upgrades"
-msgstr "Wybierz aktualizacje"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:222
+msgctxt "@label OpenGL version"
+msgid "OpenGL"
+msgstr "OpenGL"
 
-#: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
-msgctxt "@item:inmenu"
-msgid "USB printing"
-msgstr "Drukowanie USB"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:247
+msgctxt "@label"
+msgid "Not yet initialized<br/>"
+msgstr "Jeszcze nie uruchomiono<br/>"
 
-#: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print via USB"
-msgstr "Drukuj przez USB"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:250
+#, python-brace-format
+msgctxt "@label OpenGL version"
+msgid "<li>OpenGL Version: {version}</li>"
+msgstr "<li>Wersja OpenGL: {version}</li>"
 
-#: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
-msgctxt "@info:tooltip"
-msgid "Print via USB"
-msgstr "Drukuj przez USB"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:251
+#, python-brace-format
+msgctxt "@label OpenGL vendor"
+msgid "<li>OpenGL Vendor: {vendor}</li>"
+msgstr "<li>Wydawca OpenGL: {vendor}</li>"
 
-#: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
-msgctxt "@info:status"
-msgid "Connected via USB"
-msgstr "Połączono przez USB"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:252
+#, python-brace-format
+msgctxt "@label OpenGL renderer"
+msgid "<li>OpenGL Renderer: {renderer}</li>"
+msgstr "<li>OpenGL Renderer: {renderer}</li>"
 
-#: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:106
-msgctxt "@label"
-msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
-msgstr "Trwa drukowanie przez USB, zamknięcie Cura spowoduje jego zatrzymanie. Jesteś pewien?"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:286
+msgctxt "@title:groupbox"
+msgid "Error traceback"
+msgstr "Śledzenie błedu"
 
-#: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:128
-msgctxt "@message"
-msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
-msgstr "Nadal trwa drukowanie. Cura nie może rozpocząć kolejnego wydruku przez USB, dopóki poprzedni wydruk nie zostanie zakończony."
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:372
+msgctxt "@title:groupbox"
+msgid "Logs"
+msgstr "Logi"
 
-#: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:128
-msgctxt "@message"
-msgid "Print in Progress"
-msgstr "Drukowanie w toku"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:400
+msgctxt "@action:button"
+msgid "Send report"
+msgstr "Wyślij raport"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
-msgctxt "@info:status"
-msgid "tomorrow"
-msgstr "jutro"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:495
+msgctxt "@info:progress"
+msgid "Loading machines..."
+msgstr "Ładowanie drukarek..."
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
-msgctxt "@info:status"
-msgid "today"
-msgstr "dziś"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:502
+msgctxt "@info:progress"
+msgid "Setting up preferences..."
+msgstr "Ustawianie preferencji..."
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:57
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print over network"
-msgstr "Drukuj przez sieć"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:630
+msgctxt "@info:progress"
+msgid "Initializing Active Machine..."
+msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
-msgctxt "@properties:tooltip"
-msgid "Print over network"
-msgstr "Drukuj przez sieć"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:757
+msgctxt "@info:progress"
+msgid "Initializing machine manager..."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:771
+msgctxt "@info:progress"
+msgid "Initializing build volume..."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:833
+msgctxt "@info:progress"
+msgid "Setting up scene..."
+msgstr "Ustawianie sceny ..."
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:868
+msgctxt "@info:progress"
+msgid "Loading interface..."
+msgstr "Ładowanie interfejsu ..."
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:873
+msgctxt "@info:progress"
+msgid "Initializing engine..."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1166
+#, python-format
+msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
+msgid "%(width).1f x %(depth).1f x %(height).1f mm"
+msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1676
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Connected over the network"
-msgstr "Połączone przez sieć"
+msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
+msgstr "Jednocześnie można załadować tylko jeden plik G-code. Pominięto importowanie {0}"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1677
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1777
+#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:201
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+msgctxt "@info:title"
+msgid "Warning"
+msgstr "Ostrzeżenie"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1686
 #, python-brace-format
 msgctxt "@info:status"
-msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
-msgstr "Cura wykryła profile materiałów, które nie zostały jeszcze zainstalowane na gospodarzu grupy {0}."
+msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
+msgstr "Nie można otworzyć żadnego innego pliku, jeśli ładuje się G-code. Pominięto importowanie {0}"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1687
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:138
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:145
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:137
 msgctxt "@info:title"
-msgid "Sending materials to printer"
-msgstr "Wysyłanie materiałów do drukarki"
+msgid "Error"
+msgstr "Błąd"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:14
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1776
 msgctxt "@info:status"
-msgid "Sending Print Job"
-msgstr "Wysyłanie zadania druku"
+msgid "The selected model was too small to load."
+msgstr "Wybrany model był zbyta mały do załadowania."
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
+#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:29
 msgctxt "@info:status"
-msgid "Uploading print job to printer."
-msgstr "Przesyłanie zadania do drukarki."
+msgid "Multiplying and placing objects"
+msgstr "Zwielokrotnienie i umieszczanie przedmiotów"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
-msgctxt "@info:text"
-msgid "Could not upload the data to the printer."
-msgstr "Nie można wgrać danych do drukarki."
+#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:30
+msgctxt "@info:title"
+msgid "Placing Objects"
+msgstr "Umieść Obiekty"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
+#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:108
 msgctxt "@info:title"
-msgid "Network error"
-msgstr "Błąd sieci"
+msgid "Placing Object"
+msgstr "Rozmieszczenie Obiektów"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationHelpers.py:79
+msgctxt "@message"
+msgid "Could not read response."
+msgstr "Nie można odczytać odpowiedzi."
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:68
+msgctxt "@message"
+msgid "The provided state is not correct."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:79
+msgctxt "@message"
+msgid "Please give the required permissions when authorizing this application."
+msgstr "Proszę nadać wymagane uprawnienia podczas autoryzacji tej aplikacji."
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:86
+msgctxt "@message"
+msgid "Something unexpected happened when trying to log in, please try again."
+msgstr "Coś nieoczekiwanego się stało, podczas próby logowania, spróbuj ponownie."
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
+#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:201
+msgctxt "@info"
+msgid "Unable to reach the Ultimaker account server."
+msgstr "Nie można uzyskać dostępu do serwera kont Ultimaker."
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:196
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:124
+msgctxt "@title:window"
+msgid "File Already Exists"
+msgstr "Plik już istnieje"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:197
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:125
+#, python-brace-format
+msgctxt "@label Don't translate the XML tag <filename>!"
+msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
+msgstr "Plik <filename>{0}</filename> już istnieje. Czy na pewno chcesz go nadpisać?"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:432
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:435
 msgctxt "@info:status"
-msgid "Print job was successfully sent to the printer."
-msgstr "Zadanie drukowania zostało pomyślnie wysłane do drukarki."
+msgid "Invalid file URL:"
+msgstr "Nieprawidłowy adres URL pliku:"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:136
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
+msgstr "Nie udało się wyeksportować profilu do <filename>{0}</filename>: <message>{1}</message>"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:143
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
+msgstr "Nie można eksportować profilu do <filename>{0}</filename>: Wtyczka pisarza zgłosiła błąd."
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:148
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Exported profile to <filename>{0}</filename>"
+msgstr "Wyeksportowano profil do <filename>{0}</filename>"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:149
 msgctxt "@info:title"
-msgid "Data Sent"
-msgstr "Dane Wysłane"
+msgid "Export succeeded"
+msgstr "Eksport udany"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
-msgctxt "@info:status"
-msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
-msgstr "Wyślij i nadzoruj zadania druku z każdego miejsca, używając konta Ultimaker."
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:176
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>: {1}"
+msgstr "Nie powiódł się import profilu z <filename>{0}</filename>: {1}"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
-msgctxt "@info:status Ultimaker Cloud should not be translated."
-msgid "Connect to Ultimaker Cloud"
-msgstr "Połacz z Ultimaker Cloud"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:180
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
+msgstr "Nie można importować profilu z <filename>{0}</filename> przed dodaniem drukarki."
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
-msgctxt "@action"
-msgid "Get started"
-msgstr "Rozpocznij"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:197
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "No custom profile to import in file <filename>{0}</filename>"
+msgstr "Brak niestandardowego profilu do importu w pliku <filename>{0}</filename>"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:201
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>:"
+msgstr "Nie powiódł się import profilu z <filename>{0}</filename>:"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:225
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:235
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
+msgstr "Profil <filename>{0}</filename> zawiera błędne dane, nie można go importować."
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:324
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>:"
+msgstr "Błąd importu profilu z <filename>{0}</filename>:"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:327
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Please wait until the current job has been sent."
-msgstr "Poczekaj, aż bieżące zadanie zostanie wysłane."
+msgid "Successfully imported profile {0}"
+msgstr "Profil zaimportowany {0}"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
-msgctxt "@info:title"
-msgid "Print error"
-msgstr "Błąd druku"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:330
+#, python-brace-format
+msgctxt "@info:status"
+msgid "File {0} does not contain any valid profile."
+msgstr "Plik {0} nie zawiera żadnego poprawnego profilu."
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:333
+#, python-brace-format
 msgctxt "@info:status"
-msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
-msgstr "Próbujesz połączyć się z drukarką, na której nie działa Ultimaker Connect. Zaktualizuj drukarkę do najnowszej wersji firmware."
+msgid "Profile {0} has an unknown file type or is corrupted."
+msgstr "Profil {0} ma nieznany typ pliku lub jest uszkodzony."
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
-msgctxt "@info:title"
-msgid "Update your printer"
-msgstr "Zaktualizuj swoją drukarkę"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:368
+msgctxt "@label"
+msgid "Custom profile"
+msgstr "Niestandardowy profil"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:384
+msgctxt "@info:status"
+msgid "Profile is missing a quality type."
+msgstr "Profilowi brakuje typu jakości."
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:398
 #, python-brace-format
 msgctxt "@info:status"
-msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
-msgstr "Próbujesz połączyć się z {0}, ale nie jest to gospodarz grupy. Możesz odwiedzić stronę internetową, aby skonfigurować jako gospodarza."
+msgid "Could not find a quality type {0} for the current configuration."
+msgstr "Nie można znaleźć typu jakości {0} dla bieżącej konfiguracji."
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36
+msgctxt "@info:not supported profile"
+msgid "Not supported"
+msgstr "Niewspierany"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:55
+msgctxt "@info:No intent profile selected"
+msgid "Default"
+msgstr "Domyślne"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:659
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:199
+msgctxt "@label"
+msgid "Nozzle"
+msgstr "Dysza"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:796
+msgctxt "@info:message Followed by a list of settings."
+msgid "Settings have been changed to match the current availability of extruders:"
+msgstr "Ustawienia zostały zmienione w celu dopasowania do bieżącej dostępności ekstruderów:"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:798
 msgctxt "@info:title"
-msgid "Not a group host"
-msgstr "Nie jest gospodarzem grupy"
+msgid "Settings updated"
+msgstr "Ustawienia zostały zaaktualizowane"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
-msgctxt "@action"
-msgid "Configure group"
-msgstr "Konfiguruj grupę"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1367
+msgctxt "@info:title"
+msgid "Extruder(s) Disabled"
+msgstr "Ekstruder(y) wyłączony(/e)"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:26
-msgctxt "@action"
-msgid "Connect via Network"
-msgstr "Połącz przez sieć"
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:17
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:48
+msgctxt "@action:button"
+msgid "Add"
+msgstr "Dodaj"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:138
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:18
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:406
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:234
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:87
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:296
 msgctxt "@action:button"
-msgid "Print via Cloud"
-msgstr "Drukuj przez Chmurę"
+msgid "Cancel"
+msgstr "Anuluj"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:139
-msgctxt "@properties:tooltip"
-msgid "Print via Cloud"
-msgstr "Drukuj przez Chmurę"
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/ObjectsModel.py:62
+#, python-brace-format
+msgctxt "@label"
+msgid "Group #{group_nr}"
+msgstr "Grupa #{group_nr}"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:140
-msgctxt "@info:status"
-msgid "Connected via Cloud"
-msgstr "Połączony z Chmurą"
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:81
+msgctxt "@tooltip"
+msgid "Outer Wall"
+msgstr "Zewnętrzna ściana"
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/__init__.py:27
-#: /home/ruben/Projects/Cura/plugins/3MFReader/__init__.py:33
-msgctxt "@item:inlistbox"
-msgid "3MF File"
-msgstr "Plik 3MF"
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:82
+msgctxt "@tooltip"
+msgid "Inner Walls"
+msgstr "Ściany wewnętrzne"
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:199
-#: /home/ruben/Projects/Cura/cura/Settings/MachineManager.py:646
-msgctxt "@label"
-msgid "Nozzle"
-msgstr "Dysza"
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:83
+msgctxt "@tooltip"
+msgid "Skin"
+msgstr "Skin"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:84
+msgctxt "@tooltip"
+msgid "Infill"
+msgstr "Wypełnienie"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:85
+msgctxt "@tooltip"
+msgid "Support Infill"
+msgstr "Wypełnienie podpór"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:86
+msgctxt "@tooltip"
+msgid "Support Interface"
+msgstr "Łączenie podpory"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:87
+msgctxt "@tooltip"
+msgid "Support"
+msgstr "Podpory"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:88
+msgctxt "@tooltip"
+msgid "Skirt"
+msgstr "Obwódka"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:89
+msgctxt "@tooltip"
+msgid "Prime Tower"
+msgstr "Wieża czyszcząca"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:90
+msgctxt "@tooltip"
+msgid "Travel"
+msgstr "Ruch jałowy"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:91
+msgctxt "@tooltip"
+msgid "Retractions"
+msgstr "Retrakcja"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:92
+msgctxt "@tooltip"
+msgid "Other"
+msgstr "Inny"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:56
+msgctxt "@action:button"
+msgid "Next"
+msgstr "Następny"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:17
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:131
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:169
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:127
+msgctxt "@action:button"
+msgid "Close"
+msgstr "Zamknij"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:31
+msgctxt "@info:title"
+msgid "3D Model Assistant"
+msgstr "Asystent Modelu 3D"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:94
+#, python-brace-format
+msgctxt "@info:status"
+msgid ""
+"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+msgstr ""
+"<p>Jeden lub więcej modeli 3D może nie zostać wydrukowanych optymalnie ze względu na wymiary modelu oraz konfigurację materiału:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Dowiedz się, jak zapewnić najlepszą możliwą jakość oraz niezawodnośc wydruku.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">Zobacz przewodnik po jakości wydruku (strona w języku angielskim)</a></p>"
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:497
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:497
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
 msgstr "Plik projektu <filename>{0}</filename> zawiera nieznany typ maszyny <message>{1}</message>. Nie można zaimportować maszyny. Zostaną zaimportowane modele."
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:500
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:500
 msgctxt "@info:title"
 msgid "Open Project File"
 msgstr "Otwórz Plik Projektu"
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:186
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:186
 msgctxt "@title:tab"
 msgid "Recommended"
 msgstr "Zalecane"
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:188
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:188
 msgctxt "@title:tab"
 msgid "Custom"
 msgstr "Niestandardowe"
 
-#: /home/ruben/Projects/Cura/plugins/SupportEraser/__init__.py:12
-msgctxt "@label"
-msgid "Support Blocker"
-msgstr "Blokada Podpory"
-
-#: /home/ruben/Projects/Cura/plugins/SupportEraser/__init__.py:13
-msgctxt "@info:tooltip"
-msgid "Create a volume in which supports are not printed."
-msgstr "Stwórz obszar, w którym podpory nie będą drukowane."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:27
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:33
+msgctxt "@item:inlistbox"
+msgid "3MF File"
+msgstr "Plik 3MF"
 
-#: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:14
-msgctxt "@label"
-msgid "Per Model Settings"
-msgstr "Ustawienia każdego modelu osobno"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
+msgctxt "@error:zip"
+msgid "3MF Writer plug-in is corrupt."
+msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:15
-msgctxt "@info:tooltip"
-msgid "Configure Per Model Settings"
-msgstr "Konfiguruj ustawienia każdego modelu z osobna"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
+msgctxt "@error:zip"
+msgid "No permission to write the workspace here."
+msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/PreviewStage/__init__.py:13
-msgctxt "@item:inmenu"
-msgid "Preview"
-msgstr "Podgląd"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:181
+msgctxt "@error:zip"
+msgid "Error writing 3mf file."
+msgstr "Błąd zapisu pliku 3mf."
 
-#: /home/ruben/Projects/Cura/plugins/XRayView/__init__.py:12
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:26
 msgctxt "@item:inlistbox"
-msgid "X-Ray view"
-msgstr "Widok X-Ray"
+msgid "3MF file"
+msgstr "Plik 3MF"
 
-#: /home/ruben/Projects/Cura/plugins/GCodeReader/__init__.py:14
-#: /home/ruben/Projects/Cura/plugins/GCodeProfileReader/__init__.py:14
-#: /home/ruben/Projects/Cura/plugins/GCodeWriter/__init__.py:16
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:34
 msgctxt "@item:inlistbox"
-msgid "G-code File"
-msgstr "Pliki G-code"
+msgid "Cura Project 3MF file"
+msgstr "Plik Cura Project 3MF"
 
-#: /home/ruben/Projects/Cura/plugins/GCodeReader/__init__.py:18
+#: /home/trin/Gedeeld/Projects/Cura/plugins/AMFReader/__init__.py:15
 msgctxt "@item:inlistbox"
-msgid "G File"
-msgstr "Plik G-code"
-
-#: /home/ruben/Projects/Cura/plugins/GCodeReader/FlavorParser.py:338
-msgctxt "@info:status"
-msgid "Parsing G-code"
-msgstr "Analizowanie G-code"
+msgid "AMF File"
+msgstr "Plik AMF"
 
-#: /home/ruben/Projects/Cura/plugins/GCodeReader/FlavorParser.py:340
-#: /home/ruben/Projects/Cura/plugins/GCodeReader/FlavorParser.py:494
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
 msgctxt "@info:title"
-msgid "G-code Details"
-msgstr "Szczegóły G-code"
+msgid "Backups"
+msgstr "Kopie zapasowe"
 
-#: /home/ruben/Projects/Cura/plugins/GCodeReader/FlavorParser.py:492
-msgctxt "@info:generic"
-msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
-msgstr "Przed wysłaniem pliku upewnij się, że G-code jest odpowiedni do konfiguracji drukarki. Przedstawienie G-kodu może nie być dokładne."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27
+msgctxt "@info:backup_status"
+msgid "There was an error while uploading your backup."
+msgstr "Wystąpił błąd podczas wgrywania kopii zapasowej."
 
-#: /home/ruben/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
-msgctxt "@item:inmenu"
-msgid "Post Processing"
-msgstr "Przetwarzanie końcowe"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47
+msgctxt "@info:backup_status"
+msgid "Creating your backup..."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54
+msgctxt "@info:backup_status"
+msgid "There was an error while creating your backup."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58
+msgctxt "@info:backup_status"
+msgid "Uploading your backup..."
+msgstr "Wgrywanie kopii zapasowej..."
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68
+msgctxt "@info:backup_status"
+msgid "Your backup has finished uploading."
+msgstr "Wgrywanie kopii zapasowej zakończone."
 
-#: /home/ruben/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107
+msgctxt "@error:file_size"
+msgid "The backup exceeds the maximum file size."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:82
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
+msgctxt "@info:backup_status"
+msgid "There was an error trying to restore your backup."
+msgstr "Wystąpił błąd podczas próby przywrócenia kopii zapasowej."
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
 msgctxt "@item:inmenu"
-msgid "Modify G-Code"
-msgstr "Modyfikuj G-code"
+msgid "Manage backups"
+msgstr "Zarządzaj kopiami zapasowymi"
 
-#: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:331
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:343
 msgctxt "@info:status"
 msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
 msgstr "Nie można pociąć z obecnym materiałem, ponieważ nie jest on kompatybilny z wybraną maszyną lub konfiguracją."
 
-#: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:331
-#: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:362
-#: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:386
-#: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395
-#: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:404
-#: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:413
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:343
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:374
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:398
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:407
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:416
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
 msgctxt "@info:title"
 msgid "Unable to slice"
 msgstr "Nie można pociąć"
 
-#: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:361
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:373
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Unable to slice with the current settings. The following settings have errors: {0}"
 msgstr "Nie można pociąć z bieżącymi ustawieniami. Następujące ustawienia mają błędy: {0}"
 
-#: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:385
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:397
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
 msgstr "Nie można pokroić przez ustawienia osobne dla modelu. Następujące ustawienia mają błędy w jednym lub więcej modeli: {error_labels}"
 
-#: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:394
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:406
 msgctxt "@info:status"
 msgid "Unable to slice because the prime tower or prime position(s) are invalid."
 msgstr "Nie można pociąć, ponieważ wieża czyszcząca lub jej pozycja(e) są niewłaściwe."
 
-#: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:403
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:415
 #, python-format
 msgctxt "@info:status"
 msgid "Unable to slice because there are objects associated with disabled Extruder %s."
 msgstr "Nie można pociąć, ponieważ obecne są obiekty powiązane z wyłączonym ekstruderem %s."
 
-#: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:412
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:424
 msgctxt "@info:status"
-msgid "Nothing to slice because none of the models fit the build volume or are assigned to a disabled extruder. Please scale or rotate models to fit, or enable an extruder."
-msgstr "Nic do pocięcia, ponieważ żaden z modeli nie mieści się w obszarze roboczym lub jest przypisany do wyłączonego ekstrudera. Skaluj lub obróć modele, aby dopasować lub włącz ekstruder."
+msgid ""
+"Please review settings and check if your models:\n"
+"- Fit within the build volume\n"
+"- Are assigned to an enabled extruder\n"
+"- Are not all set as modifier meshes"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:50
-#: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:256
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:50
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:256
 msgctxt "@info:status"
 msgid "Processing Layers"
 msgstr "Przetwarzanie warstw"
 
-#: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:256
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:256
 msgctxt "@info:title"
 msgid "Information"
 msgstr "Informacja"
 
-#: /home/ruben/Projects/Cura/plugins/LegacyProfileReader/__init__.py:14
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileReader/__init__.py:14
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileWriter/__init__.py:14
 msgctxt "@item:inlistbox"
-msgid "Cura 15.04 profiles"
-msgstr "Profile Cura 15.04"
+msgid "Cura Profile"
+msgstr "Profile Cura"
 
-#: /home/ruben/Projects/Cura/plugins/UFPReader/__init__.py:22
-#: /home/ruben/Projects/Cura/plugins/UFPWriter/__init__.py:28
-msgctxt "@item:inlistbox"
-msgid "Ultimaker Format Package"
-msgstr "Pakiet Formatu Ultimaker"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:126
+msgctxt "@info"
+msgid "Could not access update information."
+msgstr "Nie można uzyskać dostępu do informacji o aktualizacji."
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#, python-brace-format
+msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
+msgid "New features are available for your {machine_name}! It is recommended to update the firmware on your printer."
+msgstr "Nowe funkcje są dostępne dla twojej {machine_name}! Rekomendowane jest zaktualizowanie oprogramowania drukarki."
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:21
+#, python-format
+msgctxt "@info:title The %s gets replaced with the printer name."
+msgid "New %s firmware available"
+msgstr "Nowe oprogramowanie %s jest dostępne"
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:25
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:27
+msgctxt "@action:button"
+msgid "How to update"
+msgstr "Jak zaktualizować"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:25
 msgctxt "@action"
 msgid "Update Firmware"
 msgstr "Aktualizacja Oprogramowania Sprzętowego"
 
-#: /home/ruben/Projects/Cura/plugins/PrepareStage/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Prepare"
-msgstr "Przygotuj"
-
-#: /home/ruben/Projects/Cura/plugins/TrimeshReader/__init__.py:15
-msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
-msgid "Open Compressed Triangle Mesh"
-msgstr "Otwórz skompresowaną siatkę trójkątów"
-
-#: /home/ruben/Projects/Cura/plugins/TrimeshReader/__init__.py:19
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzReader/__init__.py:17
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/__init__.py:17
 msgctxt "@item:inlistbox"
-msgid "COLLADA Digital Asset Exchange"
-msgstr "Cyfrowa wymiana zasobów COLLADA"
+msgid "Compressed G-code File"
+msgstr "Skompresowany Plik G-code"
 
-#: /home/ruben/Projects/Cura/plugins/TrimeshReader/__init__.py:23
-msgctxt "@item:inlistbox"
-msgid "glTF Binary"
-msgstr "Biblioteka glTF"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:38
+msgctxt "@error:not supported"
+msgid "GCodeGzWriter does not support text mode."
+msgstr "Zapisywacz skompresowanego G-code nie obsługuje trybu tekstowego."
 
-#: /home/ruben/Projects/Cura/plugins/TrimeshReader/__init__.py:27
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeProfileReader/__init__.py:14
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:14
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/__init__.py:16
 msgctxt "@item:inlistbox"
-msgid "glTF Embedded JSON"
-msgstr "Załączony JSON glTF"
+msgid "G-code File"
+msgstr "Pliki G-code"
 
-#: /home/ruben/Projects/Cura/plugins/TrimeshReader/__init__.py:36
-msgctxt "@item:inlistbox"
-msgid "Stanford Triangle Format"
-msgstr "Format trójkątów Stanforda"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:341
+msgctxt "@info:status"
+msgid "Parsing G-code"
+msgstr "Analizowanie G-code"
 
-#: /home/ruben/Projects/Cura/plugins/TrimeshReader/__init__.py:40
-msgctxt "@item:inlistbox"
-msgid "Compressed COLLADA Digital Asset Exchange"
-msgstr "Skompresowana cyfrowa wymiana zasobów COLLADA"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:343
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:497
+msgctxt "@info:title"
+msgid "G-code Details"
+msgstr "Szczegóły G-code"
 
-#: /home/ruben/Projects/Cura/plugins/3MFWriter/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "3MF file"
-msgstr "Plik 3MF"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:495
+msgctxt "@info:generic"
+msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
+msgstr "Przed wysłaniem pliku upewnij się, że G-code jest odpowiedni do konfiguracji drukarki. Przedstawienie G-kodu może nie być dokładne."
 
-#: /home/ruben/Projects/Cura/plugins/3MFWriter/__init__.py:34
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:18
 msgctxt "@item:inlistbox"
-msgid "Cura Project 3MF file"
-msgstr "Plik Cura Project 3MF"
-
-#: /home/ruben/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:180
-msgctxt "@error:zip"
-msgid "Error writing 3mf file."
-msgstr "Błąd zapisu pliku 3mf."
+msgid "G File"
+msgstr "Plik G-code"
 
-#: /home/ruben/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:66
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:66
 msgctxt "@error:not supported"
 msgid "GCodeWriter does not support non-text mode."
 msgstr "Zapisywacz G-code nie obsługuje trybu nietekstowego."
 
-#: /home/ruben/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:72
-#: /home/ruben/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:88
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:72
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:88
 msgctxt "@warning:status"
 msgid "Please prepare G-code before exporting."
 msgstr "Przygotuj G-code przed eksportem."
 
-#: /home/ruben/Projects/Cura/plugins/MonitorStage/__init__.py:14
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "JPG Image"
+msgstr "Obraz JPG"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "JPEG Image"
+msgstr "Obraz JPEG"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:22
+msgctxt "@item:inlistbox"
+msgid "PNG Image"
+msgstr "Obraz PNG"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "BMP Image"
+msgstr "Obraz BMP"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:30
+msgctxt "@item:inlistbox"
+msgid "GIF Image"
+msgstr "Obraz GIF"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/LegacyProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura 15.04 profiles"
+msgstr "Profile Cura 15.04"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:30
+msgctxt "@action"
+msgid "Machine Settings"
+msgstr "Ustawienia drukarki"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/__init__.py:14
 msgctxt "@item:inmenu"
 msgid "Monitor"
 msgstr "Monitor"
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:14
+msgctxt "@label"
+msgid "Per Model Settings"
+msgstr "Ustawienia każdego modelu osobno"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:15
+msgctxt "@info:tooltip"
+msgid "Configure Per Model Settings"
+msgstr "Konfiguruj ustawienia każdego modelu z osobna"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
 msgctxt "@item:inmenu"
-msgid "Manage backups"
-msgstr "Zarządzaj kopiami zapasowymi"
+msgid "Post Processing"
+msgstr "Przetwarzanie końcowe"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:37
+msgctxt "@item:inmenu"
+msgid "Modify G-Code"
+msgstr "Modyfikuj G-code"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PrepareStage/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Prepare"
+msgstr "Przygotuj"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PreviewStage/__init__.py:13
+msgctxt "@item:inmenu"
+msgid "Preview"
+msgstr "Podgląd"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Save to Removable Drive"
+msgstr "Zapisz na dysk wymienny"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
+#, python-brace-format
+msgctxt "@item:inlistbox"
+msgid "Save to Removable Drive {0}"
+msgstr "Zapisz na dysk wymienny {0}"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:64
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:107
+msgctxt "@info:status"
+msgid "There are no file formats available to write with!"
+msgstr "Nie ma żadnych formatów plików do zapisania!"
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:55
-#: /home/ruben/Projects/Cura/cura/Backups/Backup.py:104
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:94
+#, python-brace-format
+msgctxt "@info:progress Don't translate the XML tags <filename>!"
+msgid "Saving to Removable Drive <filename>{0}</filename>"
+msgstr "Zapisywanie na Dysk Wymienny <filename>{0}</filename>"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:94
 msgctxt "@info:title"
-msgid "Backup"
-msgstr "Kopia zapasowa"
+msgid "Saving"
+msgstr "Zapisywanie"
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:55
-msgctxt "@info:backup_status"
-msgid "There was an error listing your backups."
-msgstr "Wystąpił błąd z listą kopii zapasowych."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:104
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:107
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
+msgstr "Nie mogę zapisać do <filename>{0}</filename>: <message>{1}</message>"
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:132
-msgctxt "@info:backup_status"
-msgid "There was an error trying to restore your backup."
-msgstr "Wystąpił błąd podczas próby przywrócenia kopii zapasowej."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:123
+#, python-brace-format
+msgctxt "@info:status Don't translate the tag {device}!"
+msgid "Could not find a file name when trying to write to {device}."
+msgstr "Nie mogę znaleźć nazwy pliku podczas próby zapisu do {device}."
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/UploadBackupJob.py:15
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:136
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Could not save to removable drive {0}: {1}"
+msgstr "Nie można zapisać na wymiennym dysku {0}: {1}"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:145
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Saved to Removable Drive {0} as {1}"
+msgstr "Zapisano na dysk wymienny {0} jako {1}"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:145
 msgctxt "@info:title"
-msgid "Backups"
-msgstr "Kopie zapasowe"
+msgid "File Saved"
+msgstr "Plik Zapisany"
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/UploadBackupJob.py:27
-msgctxt "@info:backup_status"
-msgid "Uploading your backup..."
-msgstr "Wgrywanie kopii zapasowej..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:146
+msgctxt "@action:button"
+msgid "Eject"
+msgstr "Wyjmij"
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/UploadBackupJob.py:36
-msgctxt "@info:backup_status"
-msgid "There was an error while uploading your backup."
-msgstr "Wystąpił błąd podczas wgrywania kopii zapasowej."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:146
+#, python-brace-format
+msgctxt "@action"
+msgid "Eject removable device {0}"
+msgstr "Wyjmij urządzenie wymienne {0}"
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/UploadBackupJob.py:39
-msgctxt "@info:backup_status"
-msgid "Your backup has finished uploading."
-msgstr "Wgrywanie kopii zapasowej zakończone."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Ejected {0}. You can now safely remove the drive."
+msgstr "Wyjęto {0}. Możesz teraz bezpiecznie wyjąć dysk."
 
-#: /home/ruben/Projects/Cura/plugins/X3DReader/__init__.py:13
-msgctxt "@item:inlistbox"
-msgid "X3D File"
-msgstr "X3D Plik"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
+msgctxt "@info:title"
+msgid "Safely Remove Hardware"
+msgstr "Bezpiecznie Odłącz Urządzenie"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Failed to eject {0}. Another program may be using the drive."
+msgstr "Nie można wysunąć {0}. Inny program może używać dysku."
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:75
+msgctxt "@item:intext"
+msgid "Removable Drive"
+msgstr "Dysk wymienny"
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationView.py:119
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:119
 msgctxt "@info:status"
 msgid "Cura does not accurately display layers when Wire Printing is enabled."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationView.py:120
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:120
 msgctxt "@info:title"
 msgid "Simulation View"
 msgstr "Widok symulacji"
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationView.py:121
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:121
 msgctxt "@info:status"
 msgid "Nothing is shown because you need to slice first."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationView.py:121
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:121
 msgctxt "@info:title"
 msgid "No layers to show"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/__init__.py:15
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:122
+msgctxt "@info:option_text"
+msgid "Do not show this message again"
+msgstr "Nie pokazuj tego komunikatu ponownie"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/__init__.py:15
 msgctxt "@item:inlistbox"
 msgid "Layer view"
 msgstr "Widok warstwy"
 
-#: /home/ruben/Projects/Cura/plugins/GCodeGzReader/__init__.py:17
-#: /home/ruben/Projects/Cura/plugins/GCodeGzWriter/__init__.py:17
-msgctxt "@item:inlistbox"
-msgid "Compressed G-code File"
-msgstr "Skompresowany Plik G-code"
-
-#: /home/ruben/Projects/Cura/plugins/ModelChecker/ModelChecker.py:31
-msgctxt "@info:title"
-msgid "3D Model Assistant"
-msgstr "Asystent Modelu 3D"
-
-#: /home/ruben/Projects/Cura/plugins/ModelChecker/ModelChecker.py:92
-#, python-brace-format
-msgctxt "@info:status"
-msgid ""
-"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
-msgstr ""
-"<p>Jeden lub więcej modeli 3D może nie zostać wydrukowanych optymalnie ze względu na wymiary modelu oraz konfigurację materiału:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Dowiedz się, jak zapewnić najlepszą możliwą jakość oraz niezawodnośc wydruku.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">Zobacz przewodnik po jakości wydruku (strona w języku angielskim)</a></p>"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Solid view"
+msgstr "Widok modelu"
 
-#: /home/ruben/Projects/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:38
-msgctxt "@error:not supported"
-msgid "GCodeGzWriter does not support text mode."
-msgstr "Zapisywacz skompresowanego G-code nie obsługuje trybu tekstowego."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:12
+msgctxt "@label"
+msgid "Support Blocker"
+msgstr "Blokada Podpory"
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:125
-msgctxt "@info"
-msgid "Could not access update information."
-msgstr "Nie można uzyskać dostępu do informacji o aktualizacji."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:13
+msgctxt "@info:tooltip"
+msgid "Create a volume in which supports are not printed."
+msgstr "Stwórz obszar, w którym podpory nie będą drukowane."
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
-#, python-brace-format
-msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
-msgid "New features are available for your {machine_name}! It is recommended to update the firmware on your printer."
-msgstr "Nowe funkcje są dostępne dla twojej {machine_name}! Rekomendowane jest zaktualizowanie oprogramowania drukarki."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:101
+msgctxt "@info:generic"
+msgid "Do you want to sync material and software packages with your account?"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:21
-#, python-format
-msgctxt "@info:title The %s gets replaced with the printer name."
-msgid "New %s firmware available"
-msgstr "Nowe oprogramowanie %s jest dostępne"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:102
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:91
+msgctxt "@info:title"
+msgid "Changes detected from your Ultimaker account"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:27
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:105
 msgctxt "@action:button"
-msgid "How to update"
-msgstr "Jak zaktualizować"
-
-#: /home/ruben/Projects/Cura/cura/API/Account.py:82
-msgctxt "@info:title"
-msgid "Login failed"
-msgstr "Logowanie nie powiodło się"
+msgid "Sync"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/BuildVolume.py:95
-msgctxt "@info:status"
-msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
-msgstr "Wysokość obszaru roboczego została zmniejszona ze względu na wartość ustawienia Print Sequence (Sekwencja wydruku), aby zapobiec kolizji z wydrukowanymi modelami."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:87
+msgctxt "@info:generic"
+msgid "Syncing..."
+msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/BuildVolume.py:97
-msgctxt "@info:title"
-msgid "Build Volume"
-msgstr "Obszar Roboczy"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
+msgctxt "@button"
+msgid "Decline"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:510
-msgctxt "@info:progress"
-msgid "Loading machines..."
-msgstr "Ładowanie drukarek..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
+msgctxt "@button"
+msgid "Agree"
+msgstr "Zgadzam się"
 
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:517
-msgctxt "@info:progress"
-msgid "Setting up preferences..."
-msgstr "Ustawianie preferencji..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
+msgctxt "@title:window"
+msgid "Plugin License Agreement"
+msgstr "Akceptowanie Licencji Wtyczki"
 
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:645
-msgctxt "@info:progress"
-msgid "Initializing Active Machine..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38
+msgctxt "@button"
+msgid "Decline and remove from account"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:767
-msgctxt "@info:progress"
-msgid "Initializing machine manager..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:18
+msgctxt "@info:generic"
+msgid "You need to quit and restart {} before changes have effect."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:781
-msgctxt "@info:progress"
-msgid "Initializing build volume..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:71
+msgctxt "@info:generic"
+msgid "{} plugins failed to download"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:843
-msgctxt "@info:progress"
-msgid "Setting up scene..."
-msgstr "Ustawianie sceny ..."
-
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:878
-msgctxt "@info:progress"
-msgid "Loading interface..."
-msgstr "Ładowanie interfejsu ..."
-
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:883
-msgctxt "@info:progress"
-msgid "Initializing engine..."
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:15
+msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
+msgid "Open Compressed Triangle Mesh"
+msgstr "Otwórz skompresowaną siatkę trójkątów"
 
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:1176
-#, python-format
-msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
-msgid "%(width).1f x %(depth).1f x %(height).1f mm"
-msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:19
+msgctxt "@item:inlistbox"
+msgid "COLLADA Digital Asset Exchange"
+msgstr "Cyfrowa wymiana zasobów COLLADA"
 
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:1686
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
-msgstr "Jednocześnie można załadować tylko jeden plik G-code. Pominięto importowanie {0}"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:23
+msgctxt "@item:inlistbox"
+msgid "glTF Binary"
+msgstr "Biblioteka glTF"
 
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:1696
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
-msgstr "Nie można otworzyć żadnego innego pliku, jeśli ładuje się G-code. Pominięto importowanie {0}"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:27
+msgctxt "@item:inlistbox"
+msgid "glTF Embedded JSON"
+msgstr "Załączony JSON glTF"
 
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:1786
-msgctxt "@info:status"
-msgid "The selected model was too small to load."
-msgstr "Wybrany model był zbyta mały do załadowania."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:36
+msgctxt "@item:inlistbox"
+msgid "Stanford Triangle Format"
+msgstr "Format trójkątów Stanforda"
 
-#: /home/ruben/Projects/Cura/cura/Backups/Backup.py:99
-msgctxt "@info:backup_failed"
-msgid "Could not create archive from user data directory: {}"
-msgstr "Nie można utworzyć archiwum z folderu danych użytkownika: {}"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:40
+msgctxt "@item:inlistbox"
+msgid "Compressed COLLADA Digital Asset Exchange"
+msgstr "Skompresowana cyfrowa wymiana zasobów COLLADA"
 
-#: /home/ruben/Projects/Cura/cura/Backups/Backup.py:114
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup without having proper data or meta data."
-msgstr "Podjęto próbę przywrócenia kopii zapasowej Cura na podstawie niepoprawnych danych lub metadanych."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPReader/__init__.py:22
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/__init__.py:28
+msgctxt "@item:inlistbox"
+msgid "Ultimaker Format Package"
+msgstr "Pakiet Formatu Ultimaker"
 
-#: /home/ruben/Projects/Cura/cura/Backups/Backup.py:125
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup that is higher than the current version."
-msgstr "Próbowano przywrócić kopię zapasową Cura, nowszą od aktualnej wersji."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:21
+msgctxt "@action"
+msgid "Level build plate"
+msgstr "Wypoziomuj stół"
 
-#: /home/ruben/Projects/Cura/cura/UI/ObjectsModel.py:62
-#, python-brace-format
-msgctxt "@label"
-msgid "Group #{group_nr}"
-msgstr "Grupa #{group_nr}"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:18
+msgctxt "@action"
+msgid "Select upgrades"
+msgstr "Wybierz aktualizacje"
 
-#: /home/ruben/Projects/Cura/cura/UI/AddPrinterPagesModel.py:17
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:48
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:139
 msgctxt "@action:button"
-msgid "Add"
-msgstr "Dodaj"
+msgid "Print via Cloud"
+msgstr "Drukuj przez Chmurę"
 
-#: /home/ruben/Projects/Cura/cura/UI/AddPrinterPagesModel.py:18
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:87
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:296
-#: /home/ruben/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:234
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:406
-msgctxt "@action:button"
-msgid "Cancel"
-msgstr "Anuluj"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:140
+msgctxt "@properties:tooltip"
+msgid "Print via Cloud"
+msgstr "Drukuj przez Chmurę"
 
-#: /home/ruben/Projects/Cura/cura/UI/WhatsNewPagesModel.py:17
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:124
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:169
-#: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:131
-#: /home/ruben/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
-msgctxt "@action:button"
-msgid "Close"
-msgstr "Zamknij"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:141
+msgctxt "@info:status"
+msgid "Connected via Cloud"
+msgstr "Połączony z Chmurą"
 
-#: /home/ruben/Projects/Cura/cura/UI/PrintInformation.py:81
-msgctxt "@tooltip"
-msgid "Outer Wall"
-msgstr "Zewnętrzna ściana"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
+msgctxt "@info:status"
+msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
+msgstr "Wyślij i nadzoruj zadania druku z każdego miejsca, używając konta Ultimaker."
 
-#: /home/ruben/Projects/Cura/cura/UI/PrintInformation.py:82
-msgctxt "@tooltip"
-msgid "Inner Walls"
-msgstr "Ściany wewnętrzne"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
+msgctxt "@info:status Ultimaker Cloud should not be translated."
+msgid "Connect to Ultimaker Cloud"
+msgstr "Połacz z Ultimaker Cloud"
 
-#: /home/ruben/Projects/Cura/cura/UI/PrintInformation.py:83
-msgctxt "@tooltip"
-msgid "Skin"
-msgstr "Skin"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
+msgctxt "@action"
+msgid "Get started"
+msgstr "Rozpocznij"
 
-#: /home/ruben/Projects/Cura/cura/UI/PrintInformation.py:84
-msgctxt "@tooltip"
-msgid "Infill"
-msgstr "Wypełnienie"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+msgctxt "@info:status"
+msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
+msgstr "Próbujesz połączyć się z drukarką, na której nie działa Ultimaker Connect. Zaktualizuj drukarkę do najnowszej wersji firmware."
 
-#: /home/ruben/Projects/Cura/cura/UI/PrintInformation.py:85
-msgctxt "@tooltip"
-msgid "Support Infill"
-msgstr "Wypełnienie podpór"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
+msgctxt "@info:title"
+msgid "Update your printer"
+msgstr "Zaktualizuj swoją drukarkę"
 
-#: /home/ruben/Projects/Cura/cura/UI/PrintInformation.py:86
-msgctxt "@tooltip"
-msgid "Support Interface"
-msgstr "Łączenie podpory"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
+msgstr "Cura wykryła profile materiałów, które nie zostały jeszcze zainstalowane na gospodarzu grupy {0}."
 
-#: /home/ruben/Projects/Cura/cura/UI/PrintInformation.py:87
-msgctxt "@tooltip"
-msgid "Support"
-msgstr "Podpory"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
+msgctxt "@info:title"
+msgid "Sending materials to printer"
+msgstr "Wysyłanie materiałów do drukarki"
 
-#: /home/ruben/Projects/Cura/cura/UI/PrintInformation.py:88
-msgctxt "@tooltip"
-msgid "Skirt"
-msgstr "Obwódka"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
+#, python-brace-format
+msgctxt "@info:status"
+msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
+msgstr "Próbujesz połączyć się z {0}, ale nie jest to gospodarz grupy. Możesz odwiedzić stronę internetową, aby skonfigurować jako gospodarza."
 
-#: /home/ruben/Projects/Cura/cura/UI/PrintInformation.py:89
-msgctxt "@tooltip"
-msgid "Prime Tower"
-msgstr "Wieża czyszcząca"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
+msgctxt "@info:title"
+msgid "Not a group host"
+msgstr "Nie jest gospodarzem grupy"
 
-#: /home/ruben/Projects/Cura/cura/UI/PrintInformation.py:90
-msgctxt "@tooltip"
-msgid "Travel"
-msgstr "Ruch jałowy"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
+msgctxt "@action"
+msgid "Configure group"
+msgstr "Konfiguruj grupę"
 
-#: /home/ruben/Projects/Cura/cura/UI/PrintInformation.py:91
-msgctxt "@tooltip"
-msgid "Retractions"
-msgstr "Retrakcja"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+msgctxt "@info:status"
+msgid "Please wait until the current job has been sent."
+msgstr "Poczekaj, aż bieżące zadanie zostanie wysłane."
 
-#: /home/ruben/Projects/Cura/cura/UI/PrintInformation.py:92
-msgctxt "@tooltip"
-msgid "Other"
-msgstr "Inny"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
+msgctxt "@info:title"
+msgid "Print error"
+msgstr "Błąd druku"
 
-#: /home/ruben/Projects/Cura/cura/UI/WelcomePagesModel.py:56
-msgctxt "@action:button"
-msgid "Next"
-msgstr "Następny"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
+msgctxt "@info:text"
+msgid "Could not upload the data to the printer."
+msgstr "Nie można wgrać danych do drukarki."
 
-#: /home/ruben/Projects/Cura/cura/MultiplyObjectsJob.py:29
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
+msgctxt "@info:title"
+msgid "Network error"
+msgstr "Błąd sieci"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:14
 msgctxt "@info:status"
-msgid "Multiplying and placing objects"
-msgstr "Zwielokrotnienie i umieszczanie przedmiotów"
+msgid "Sending Print Job"
+msgstr "Wysyłanie zadania druku"
 
-#: /home/ruben/Projects/Cura/cura/MultiplyObjectsJob.py:30
-msgctxt "@info:title"
-msgid "Placing Objects"
-msgstr "Umieść Obiekty"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
+msgctxt "@info:status"
+msgid "Uploading print job to printer."
+msgstr "Przesyłanie zadania do drukarki."
 
-#: /home/ruben/Projects/Cura/cura/MultiplyObjectsJob.py:108
-#: /home/ruben/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:103
-#: /home/ruben/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:149
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
-msgid "Unable to find a location within the build volume for all objects"
-msgstr "Nie można znaleźć lokalizacji w obrębie obszaru roboczego dla wszystkich obiektów"
+msgid "Print job was successfully sent to the printer."
+msgstr "Zadanie drukowania zostało pomyślnie wysłane do drukarki."
 
-#: /home/ruben/Projects/Cura/cura/MultiplyObjectsJob.py:108
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
 msgctxt "@info:title"
-msgid "Placing Object"
-msgstr "Rozmieszczenie Obiektów"
-
-#: /home/ruben/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11
-#: /home/ruben/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:41
-#: /home/ruben/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:321
-msgctxt "@label"
-msgid "Default"
-msgstr "Domyślne"
+msgid "Data Sent"
+msgstr "Dane Wysłane"
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/IntentTranslations.py:14
-#: /home/ruben/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:44
-msgctxt "@label"
-msgid "Visual"
-msgstr "Wizualny"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:57
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print over network"
+msgstr "Drukuj przez sieć"
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/IntentTranslations.py:15
-#: /home/ruben/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:45
-msgctxt "@text"
-msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
-msgstr "Profil wizualny jest przeznaczony do drukowania prototypów i modeli z zamiarem podkreślenia wysokiej jakości wizualnej i powierzchni."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
+msgctxt "@properties:tooltip"
+msgid "Print over network"
+msgstr "Drukuj przez sieć"
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/IntentTranslations.py:18
-#: /home/ruben/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:48
-msgctxt "@label"
-msgid "Engineering"
-msgstr "Inżynieria"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
+msgctxt "@info:status"
+msgid "Connected over the network"
+msgstr "Połączone przez sieć"
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/IntentTranslations.py:19
-#: /home/ruben/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:49
-msgctxt "@text"
-msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
-msgstr "Profil inżynieryjny jest przeznaczony do drukowania prototypów funkcjonalnych i części końcowych z naciskiem na lepszą dokładność i lepszą tolerancję."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:26
+msgctxt "@action"
+msgid "Connect via Network"
+msgstr "Połącz przez sieć"
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/IntentTranslations.py:22
-#: /home/ruben/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:52
-msgctxt "@label"
-msgid "Draft"
-msgstr "Szkic"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
+msgctxt "@info:status"
+msgid "tomorrow"
+msgstr "jutro"
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/IntentTranslations.py:23
-#: /home/ruben/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:53
-msgctxt "@text"
-msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
-msgstr "Profil szkicu służy do drukowania początkowych prototypów i weryfikacji koncepcji z naciskiem na krótki czasu drukowania."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+msgctxt "@info:status"
+msgid "today"
+msgstr "dziś"
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:85
-#: /home/ruben/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:104
-#: /home/ruben/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:340
-#: /home/ruben/Projects/Cura/cura/Settings/MachineManager.py:1474
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:184
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:225
-msgctxt "@label"
-msgid "Unknown"
-msgstr "Nieznany"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
+msgctxt "@item:inmenu"
+msgid "USB printing"
+msgstr "Drukowanie USB"
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
-msgctxt "@label"
-msgid "The printer(s) below cannot be connected because they are part of a group"
-msgstr "Poniższa drukarka nie może być podłączona, ponieważ jest częścią grupy"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print via USB"
+msgstr "Drukuj przez USB"
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:117
-msgctxt "@label"
-msgid "Available networked printers"
-msgstr "Dostępne drukarki sieciowe"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
+msgctxt "@info:tooltip"
+msgid "Print via USB"
+msgstr "Drukuj przez USB"
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/ExtrudersModel.py:208
-msgctxt "@menuitem"
-msgid "Not overridden"
-msgstr "Nie zastąpione"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
+msgctxt "@info:status"
+msgid "Connected via USB"
+msgstr "Połączono przez USB"
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:213
+#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:106
 msgctxt "@label"
-msgid "Custom Material"
-msgstr "Niestandardowy materiał"
+msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
+msgstr "Trwa drukowanie przez USB, zamknięcie Cura spowoduje jego zatrzymanie. Jesteś pewien?"
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:214
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
-msgctxt "@label"
-msgid "Custom"
-msgstr "Niestandardowy"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:128
+msgctxt "@message"
+msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
+msgstr "Nadal trwa drukowanie. Cura nie może rozpocząć kolejnego wydruku przez USB, dopóki poprzedni wydruk nie zostanie zakończony."
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:359
-msgctxt "@label"
-msgid "Custom profiles"
-msgstr "Profile niestandardowe"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:128
+msgctxt "@message"
+msgid "Print in Progress"
+msgstr "Drukowanie w toku"
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:393
-#, python-brace-format
+#: /home/trin/Gedeeld/Projects/Cura/plugins/X3DReader/__init__.py:13
 msgctxt "@item:inlistbox"
-msgid "All Supported Types ({0})"
-msgstr "Wszystkie Wspierane Typy ({0})"
+msgid "X3D File"
+msgstr "X3D Plik"
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:394
+#: /home/trin/Gedeeld/Projects/Cura/plugins/XRayView/__init__.py:12
 msgctxt "@item:inlistbox"
-msgid "All Files (*)"
-msgstr "Wszystkie Pliki (*)"
+msgid "X-Ray view"
+msgstr "Widok X-Ray"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:90
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.qml:22
+msgctxt "@info:tooltip"
+msgid "Some things could be problematic in this print. Click to see tips for adjustment."
+msgstr "Niektóre rzeczy mogą być problematyczne podczas tego wydruku. Kliknij, aby zobaczyć porady dotyczące regulacji."
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:14
 msgctxt "@title:window"
-msgid "Cura can't start"
-msgstr "Cura nie może się uruchomić"
+msgid "Open Project"
+msgstr "Otwórz projekt"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:96
-msgctxt "@label crash message"
-msgid ""
-"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
-"                    <p>We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.</p>\n"
-"                    <p>Backups can be found in the configuration folder.</p>\n"
-"                    <p>Please send us this Crash Report to fix the problem.</p>\n"
-"                "
-msgstr ""
-"<p><b>Ups, Ultimaker Cura natrafiła coś co nie wygląda dobrze.</p></b>\n"
-"                    <p>Natrafiliśmy na nieodwracalny błąd podczas uruchamiania. Prawdopodobnie jest to spowodowane błędem w plikach konfiguracyjnych. Zalecamy backup i reset konfiguracji.</p>\n"
-"                    <p>Backupy mogą być znalezione w folderze konfiguracyjnym.</p>\n"
-"                    <p>Proszę wyślij do nas ten Raport Błędu, aby rozwiązać problem.</p>\n"
-"              "
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:58
+msgctxt "@action:ComboBox Update/override existing profile"
+msgid "Update existing"
+msgstr "Zaktualizuj istniejące"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:105
-msgctxt "@action:button"
-msgid "Send crash report to Ultimaker"
-msgstr "Wyślij raport błędu do Ultimaker"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:59
+msgctxt "@action:ComboBox Save settings in a new profile"
+msgid "Create new"
+msgstr "Utwórz nowy"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:108
-msgctxt "@action:button"
-msgid "Show detailed crash report"
-msgstr "Pokaż szczegółowy raport błędu"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:70
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:73
+msgctxt "@action:title"
+msgid "Summary - Cura Project"
+msgstr "Podsumowanie - Projekt Cura"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:112
-msgctxt "@action:button"
-msgid "Show configuration folder"
-msgstr "Pokaż folder konfiguracyjny"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:92
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:97
+msgctxt "@action:label"
+msgid "Printer settings"
+msgstr "Ustawienia drukarki"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:123
-msgctxt "@action:button"
-msgid "Backup and Reset Configuration"
-msgstr "Zrób Backup i Zresetuj Konfigurację"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:108
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the machine be resolved?"
+msgstr "Jak powinny być rozwiązywane błędy w maszynie?"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:152
-msgctxt "@title:window"
-msgid "Crash Report"
-msgstr "Raport Błędu"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:115
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:124
+msgctxt "@action:ComboBox option"
+msgid "Update"
+msgstr "Aktualizacja"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:172
-msgctxt "@label crash message"
-msgid ""
-"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
-"            <p>Please use the \"Send report\" button to post a bug report automatically to our servers</p>\n"
-"        "
-msgstr ""
-"<p><b>Wystąpił błąd krytyczny. Proszę wyślij do nas ten Raport Błędu, aby rozwiązać problem</p></b>\n"
-"            <p>Proszę użyj przycisku \"Wyślij raport\", aby wysłać raport błędu automatycznie na nasze serwery</p>\n"
-"        "
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:116
+msgctxt "@action:ComboBox option"
+msgid "Create new"
+msgstr "Utwórz nowy"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:180
-msgctxt "@title:groupbox"
-msgid "System information"
-msgstr "Informacje o systemie"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:143
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:106
+msgctxt "@action:label"
+msgid "Type"
+msgstr "Typ"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:189
-msgctxt "@label unknown version of Cura"
-msgid "Unknown"
-msgstr "Nieznany"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:159
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:121
+msgctxt "@action:label"
+msgid "Printer Group"
+msgstr "Grupa drukarek"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:200
-msgctxt "@label Cura version number"
-msgid "Cura version"
-msgstr "Wersja Cura"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:180
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:222
+msgctxt "@action:label"
+msgid "Profile settings"
+msgstr "Ustawienia profilu"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:201
-msgctxt "@label"
-msgid "Cura language"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:196
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the profile be resolved?"
+msgstr "Jak powinien zostać rozwiązany problem z profilem?"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:202
-msgctxt "@label"
-msgid "OS language"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:216
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:323
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:121
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:246
+msgctxt "@action:label"
+msgid "Name"
+msgstr "Nazwa"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:203
-msgctxt "@label Type of platform"
-msgid "Platform"
-msgstr "Platforma"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:231
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:263
+msgctxt "@action:label"
+msgid "Intent"
+msgstr "Cel"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:204
-msgctxt "@label"
-msgid "Qt version"
-msgstr "Wersja Qt"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:246
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:230
+msgctxt "@action:label"
+msgid "Not in profile"
+msgstr "Nie w profilu"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:205
-msgctxt "@label"
-msgid "PyQt version"
-msgstr "Wersja PyQt"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:251
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:235
+msgctxt "@action:label"
+msgid "%1 override"
+msgid_plural "%1 overrides"
+msgstr[0] "%1 nadpisanie"
+msgstr[1] "%1 Zastępuje"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:206
-msgctxt "@label OpenGL version"
-msgid "OpenGL"
-msgstr "OpenGL"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:262
+msgctxt "@action:label"
+msgid "Derivative from"
+msgstr "Pochodna z"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:231
-msgctxt "@label"
-msgid "Not yet initialized<br/>"
-msgstr "Jeszcze nie uruchomiono<br/>"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:267
+msgctxt "@action:label"
+msgid "%1, %2 override"
+msgid_plural "%1, %2 overrides"
+msgstr[0] "%1, %2 nadpisanie"
+msgstr[1] "%1, %2 zastępuje"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:234
-#, python-brace-format
-msgctxt "@label OpenGL version"
-msgid "<li>OpenGL Version: {version}</li>"
-msgstr "<li>Wersja OpenGL: {version}</li>"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:283
+msgctxt "@action:label"
+msgid "Material settings"
+msgstr "Ustawienia materiału"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:235
-#, python-brace-format
-msgctxt "@label OpenGL vendor"
-msgid "<li>OpenGL Vendor: {vendor}</li>"
-msgstr "<li>Wydawca OpenGL: {vendor}</li>"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:299
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the material be resolved?"
+msgstr "Jak powinien zostać rozwiązany problem z materiałem?"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:236
-#, python-brace-format
-msgctxt "@label OpenGL renderer"
-msgid "<li>OpenGL Renderer: {renderer}</li>"
-msgstr "<li>OpenGL Renderer: {renderer}</li>"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:342
+msgctxt "@action:label"
+msgid "Setting visibility"
+msgstr "Ustawienie widoczności"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:270
-msgctxt "@title:groupbox"
-msgid "Error traceback"
-msgstr "Śledzenie błedu"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:351
+msgctxt "@action:label"
+msgid "Mode"
+msgstr "Tryb"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:356
-msgctxt "@title:groupbox"
-msgid "Logs"
-msgstr "Logi"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:367
+msgctxt "@action:label"
+msgid "Visible settings:"
+msgstr "Widoczne ustawienie:"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:379
-msgctxt "@title:groupbox"
-msgid "User description (Note: Developers may not speak your language, please use English if possible)"
-msgstr "Opis użytkownika (Uwaga: programiści mogą nie mówić w Twoim języku, w miarę możliwości używaj angielskiego)"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:372
+msgctxt "@action:label"
+msgid "%1 out of %2"
+msgstr "%1 poza %2"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:399
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:398
+msgctxt "@action:warning"
+msgid "Loading a project will clear all models on the build plate."
+msgstr "Ładowanie projektu usunie wszystkie modele z platformy roboczej."
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:416
 msgctxt "@action:button"
-msgid "Send report"
-msgstr "Wyślij raport"
+msgid "Open"
+msgstr "Otwórz"
 
-#: /home/ruben/Projects/Cura/cura/Settings/ContainerManager.py:196
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:124
-msgctxt "@title:window"
-msgid "File Already Exists"
-msgstr "Plik już istnieje"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
+msgctxt "@button"
+msgid "Want more?"
+msgstr "Chcesz więcej?"
 
-#: /home/ruben/Projects/Cura/cura/Settings/ContainerManager.py:197
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:125
-#, python-brace-format
-msgctxt "@label Don't translate the XML tag <filename>!"
-msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
-msgstr "Plik <filename>{0}</filename> już istnieje. Czy na pewno chcesz go nadpisać?"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
+msgctxt "@button"
+msgid "Backup Now"
+msgstr "Utwórz kopię zapasową"
 
-#: /home/ruben/Projects/Cura/cura/Settings/ContainerManager.py:430
-#: /home/ruben/Projects/Cura/cura/Settings/ContainerManager.py:433
-msgctxt "@info:status"
-msgid "Invalid file URL:"
-msgstr "Nieprawidłowy adres URL pliku:"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
+msgctxt "@checkbox:description"
+msgid "Auto Backup"
+msgstr "Automatyczne tworzenie kopii zapasowej"
 
-#: /home/ruben/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36
-msgctxt "@info:not supported profile"
-msgid "Not supported"
-msgstr "Niewspierany"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
+msgctxt "@checkbox:description"
+msgid "Automatically create a backup each day that Cura is started."
+msgstr "Automatycznie twórz kopie zapasowe każdego dnia, w którym uruchomiono Curę."
 
-#: /home/ruben/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:55
-msgctxt "@info:No intent profile selected"
-msgid "Default"
-msgstr "Domyślne"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
+msgctxt "@button"
+msgid "Restore"
+msgstr "Przywróć"
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:136
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
-msgstr "Nie udało się wyeksportować profilu do <filename>{0}</filename>: <message>{1}</message>"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
+msgctxt "@dialog:title"
+msgid "Delete Backup"
+msgstr "Usuń kopię zapasową"
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:143
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
-msgstr "Nie można eksportować profilu do <filename>{0}</filename>: Wtyczka pisarza zgłosiła błąd."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
+msgctxt "@dialog:info"
+msgid "Are you sure you want to delete this backup? This cannot be undone."
+msgstr "Czy na pewno chcesz usunąć tę kopię zapasową? Tej czynności nie można cofnąć."
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:148
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Exported profile to <filename>{0}</filename>"
-msgstr "Wyeksportowano profil do <filename>{0}</filename>"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
+msgctxt "@dialog:title"
+msgid "Restore Backup"
+msgstr "Przywróć kopię zapasową"
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:149
-msgctxt "@info:title"
-msgid "Export succeeded"
-msgstr "Eksport udany"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
+msgctxt "@dialog:info"
+msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
+msgstr "Musisz zrestartować Curę przed przywróceniem kopii zapasowej. Czy chcesz teraz zamknąć Curę?"
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:176
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>: {1}"
-msgstr "Nie powiódł się import profilu z <filename>{0}</filename>: {1}"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
+msgctxt "@backuplist:label"
+msgid "Cura Version"
+msgstr "Wersja Cura"
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:180
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
-msgstr "Nie można importować profilu z <filename>{0}</filename> przed dodaniem drukarki."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
+msgctxt "@backuplist:label"
+msgid "Machines"
+msgstr "Drukarki"
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:197
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "No custom profile to import in file <filename>{0}</filename>"
-msgstr "Brak niestandardowego profilu do importu w pliku <filename>{0}</filename>"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
+msgctxt "@backuplist:label"
+msgid "Materials"
+msgstr "Materiały"
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:201
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>:"
-msgstr "Nie powiódł się import profilu z <filename>{0}</filename>:"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
+msgctxt "@backuplist:label"
+msgid "Profiles"
+msgstr "Profile"
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:225
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:235
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
-msgstr "Profil <filename>{0}</filename> zawiera błędne dane, nie można go importować."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
+msgctxt "@backuplist:label"
+msgid "Plugins"
+msgstr "Pluginy"
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:324
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>:"
-msgstr "Błąd importu profilu z <filename>{0}</filename>:"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/main.qml:25
+msgctxt "@title:window"
+msgid "Cura Backups"
+msgstr "Kopie zapasowe cura"
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:327
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Successfully imported profile {0}"
-msgstr "Profil zaimportowany {0}"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
+msgctxt "@title"
+msgid "My Backups"
+msgstr "Moje Kopie Zapasowe"
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:330
-#, python-brace-format
-msgctxt "@info:status"
-msgid "File {0} does not contain any valid profile."
-msgstr "Plik {0} nie zawiera żadnego poprawnego profilu."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
+msgctxt "@empty_state"
+msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
+msgstr "Nie masz żadnych kopii zapasowych. Użyj przycisku „Utwórz kopię zapasową”, aby go utworzyć."
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:333
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Profile {0} has an unknown file type or is corrupted."
-msgstr "Profil {0} ma nieznany typ pliku lub jest uszkodzony."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
+msgctxt "@backup_limit_info"
+msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
+msgstr "Podczas fazy podglądu będziesz ograniczony do 5 widocznych kopii zapasowych. Usuń kopię zapasową, aby zobaczyć starsze."
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:368
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
+msgctxt "@description"
+msgid "Backup and synchronize your Cura settings."
+msgstr "Wykonaj kopię zapasową i zsynchronizuj ustawienia Cura."
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:48
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:68
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:138
+msgctxt "@button"
+msgid "Sign in"
+msgstr "Zaloguj"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
+msgctxt "@title"
+msgid "Update Firmware"
+msgstr "Aktualizacja Oprogramowania Sprzętowego"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
 msgctxt "@label"
-msgid "Custom profile"
-msgstr "Niestandardowy profil"
+msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
+msgstr "Oprogramowanie ukłądowe jest częścią oprogramowania działającego bezpośrednio na drukarce 3D. Oprogramowanie to steruje silnikami krokowymi, reguluje temperaturę i ostatecznie sprawia, że drukarka działa."
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:384
-msgctxt "@info:status"
-msgid "Profile is missing a quality type."
-msgstr "Profilowi brakuje typu jakości."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
+msgctxt "@label"
+msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
+msgstr "Oprogramowanie ukłądowe dostarczane z nowymi drukarkami działa, ale nowe wersje mają zazwyczaj więcej funkcji i ulepszeń."
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:398
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Could not find a quality type {0} for the current configuration."
-msgstr "Nie można znaleźć typu jakości {0} dla bieżącej konfiguracji."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
+msgctxt "@action:button"
+msgid "Automatically upgrade Firmware"
+msgstr "Automatycznie uaktualnij oprogramowanie"
 
-#: /home/ruben/Projects/Cura/cura/Settings/MachineManager.py:780
-msgctxt "@info:message Followed by a list of settings."
-msgid "Settings have been changed to match the current availability of extruders:"
-msgstr "Ustawienia zostały zmienione w celu dopasowania do bieżącej dostępności ekstruderów:"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
+msgctxt "@action:button"
+msgid "Upload custom Firmware"
+msgstr "Prześlij niestandardowe oprogramowanie"
 
-#: /home/ruben/Projects/Cura/cura/Settings/MachineManager.py:782
-msgctxt "@info:title"
-msgid "Settings updated"
-msgstr "Ustawienia zostały zaaktualizowane"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
+msgctxt "@label"
+msgid "Firmware can not be updated because there is no connection with the printer."
+msgstr "Oprogramowanie sprzętowe nie może być zaktualizowane, ponieważ nie ma połączenia z drukarką."
 
-#: /home/ruben/Projects/Cura/cura/Settings/MachineManager.py:1351
-msgctxt "@info:title"
-msgid "Extruder(s) Disabled"
-msgstr "Ekstruder(y) wyłączony(/e)"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
+msgctxt "@label"
+msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
+msgstr "Oprogramowanie sprzętowe nie może być zaktualizowane, ponieważ połączenie z drukarką nie wspiera usługi."
 
-#: /home/ruben/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:30
-#: /home/ruben/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:66
-msgctxt "@info:status"
-msgid "Finding new location for objects"
-msgstr "Znajdowanie nowej lokalizacji obiektów"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
+msgctxt "@title:window"
+msgid "Select custom firmware"
+msgstr "Wybierz niestandardowe oprogramowanie"
 
-#: /home/ruben/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:34
-#: /home/ruben/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:70
-msgctxt "@info:title"
-msgid "Finding Location"
-msgstr "Szukanie Lokalizacji"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
+msgctxt "@title:window"
+msgid "Firmware Update"
+msgstr "Aktualizacja oprogramowania układowego"
 
-#: /home/ruben/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:104
-#: /home/ruben/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150
-msgctxt "@info:title"
-msgid "Can't Find Location"
-msgstr "Nie można Znaleźć Lokalizacji"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
+msgctxt "@label"
+msgid "Updating firmware."
+msgstr "Aktualizowanie oprogramowania."
 
-#: /home/ruben/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:68
-msgctxt "@message"
-msgid "The provided state is not correct."
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
+msgctxt "@label"
+msgid "Firmware update completed."
+msgstr "Aktualizacja oprogramowania zakończona."
 
-#: /home/ruben/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:79
-msgctxt "@message"
-msgid "Please give the required permissions when authorizing this application."
-msgstr "Proszę nadać wymagane uprawnienia podczas autoryzacji tej aplikacji."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
+msgctxt "@label"
+msgid "Firmware update failed due to an unknown error."
+msgstr "Aktualizacja oprogramowania nie powiodła się z powodu nieznanego błędu."
 
-#: /home/ruben/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:86
-msgctxt "@message"
-msgid "Something unexpected happened when trying to log in, please try again."
-msgstr "Coś nieoczekiwanego się stało, podczas próby logowania, spróbuj ponownie."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
+msgctxt "@label"
+msgid "Firmware update failed due to an communication error."
+msgstr "Aktualizacja oprogramowania nie powiodła się z powodu błędu komunikacji."
 
-#: /home/ruben/Projects/Cura/cura/OAuth2/AuthorizationService.py:201
-msgctxt "@info"
-msgid "Unable to reach the Ultimaker account server."
-msgstr "Nie można uzyskać dostępu do serwera kont Ultimaker."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
+msgctxt "@label"
+msgid "Firmware update failed due to an input/output error."
+msgstr "Aktualizacja oprogramowania nie powiodła się z powodu błędu wejścia / wyjścia."
 
-#: /home/ruben/Projects/Cura/cura/OAuth2/AuthorizationHelpers.py:79
-msgctxt "@message"
-msgid "Could not read response."
-msgstr "Nie można odczytać odpowiedzi."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
+msgctxt "@label"
+msgid "Firmware update failed due to missing firmware."
+msgstr "Aktualizacja oprogramowania nie powiodła się z powodu utraconego oprogramowania."
 
-#: /home/ruben/Projects/Cura/resources/qml/MonitorButton.qml:119
-msgctxt "@label:MonitorStatus"
-msgid "Not connected to a printer"
-msgstr "Nie podłączono do drukarki"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:19
+msgctxt "@title:window"
+msgid "Convert Image..."
+msgstr "Konwertuj obraz ..."
 
-#: /home/ruben/Projects/Cura/resources/qml/MonitorButton.qml:123
-msgctxt "@label:MonitorStatus"
-msgid "Printer does not accept commands"
-msgstr "Drukarka nie akceptuje poleceń"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:33
+msgctxt "@info:tooltip"
+msgid "The maximum distance of each pixel from \"Base.\""
+msgstr "Maksymalna odległość każdego piksela od \"Bazy.\""
 
-#: /home/ruben/Projects/Cura/resources/qml/MonitorButton.qml:133
-msgctxt "@label:MonitorStatus"
-msgid "In maintenance. Please check the printer"
-msgstr "W naprawie. Sprawdź drukarkę"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:38
+msgctxt "@action:label"
+msgid "Height (mm)"
+msgstr "Wysokość (mm)"
 
-#: /home/ruben/Projects/Cura/resources/qml/MonitorButton.qml:144
-msgctxt "@label:MonitorStatus"
-msgid "Lost connection with the printer"
-msgstr "Utracone połączenie z drukarką"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:56
+msgctxt "@info:tooltip"
+msgid "The base height from the build plate in millimeters."
+msgstr "Wysokość podstawy od stołu w milimetrach."
 
-#: /home/ruben/Projects/Cura/resources/qml/MonitorButton.qml:146
-msgctxt "@label:MonitorStatus"
-msgid "Printing..."
-msgstr "Drukowanie..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:61
+msgctxt "@action:label"
+msgid "Base (mm)"
+msgstr "Baza (mm)"
 
-#: /home/ruben/Projects/Cura/resources/qml/MonitorButton.qml:149
-msgctxt "@label:MonitorStatus"
-msgid "Paused"
-msgstr "Wstrzymano"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:79
+msgctxt "@info:tooltip"
+msgid "The width in millimeters on the build plate."
+msgstr "Szerokość w milimetrach na stole."
 
-#: /home/ruben/Projects/Cura/resources/qml/MonitorButton.qml:152
-msgctxt "@label:MonitorStatus"
-msgid "Preparing..."
-msgstr "Przygotowywanie ..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:84
+msgctxt "@action:label"
+msgid "Width (mm)"
+msgstr "Szerokość (mm)"
 
-#: /home/ruben/Projects/Cura/resources/qml/MonitorButton.qml:154
-msgctxt "@label:MonitorStatus"
-msgid "Please remove the print"
-msgstr "Usuń wydruk"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:103
+msgctxt "@info:tooltip"
+msgid "The depth in millimeters on the build plate"
+msgstr "Głębokość w milimetrach na stole"
 
-#: /home/ruben/Projects/Cura/resources/qml/MonitorButton.qml:284
-#: /home/ruben/Projects/Cura/resources/qml/MonitorButton.qml:293
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
-msgctxt "@label"
-msgid "Pause"
-msgstr "Wstrzymaj"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:108
+msgctxt "@action:label"
+msgid "Depth (mm)"
+msgstr "Głębokość (mm)"
 
-#: /home/ruben/Projects/Cura/resources/qml/MonitorButton.qml:289
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
-msgctxt "@label"
-msgid "Resume"
-msgstr "Ponów"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:126
+msgctxt "@info:tooltip"
+msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
+msgstr "Dla litofanów ciemne piksele powinny odpowiadać grubszym miejscom, aby zablokować więcej światła. Dla zaznaczenia wysokości map, jaśniejsze piksele oznaczają wyższy teren, więc jaśniejsze piksele powinny odpowiadać wyższym położeniom w wygenerowanym modelu 3D."
 
-#: /home/ruben/Projects/Cura/resources/qml/MonitorButton.qml:325
-msgctxt "@label"
-msgid "Abort Print"
-msgstr "Anuluj Wydruk"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
+msgctxt "@item:inlistbox"
+msgid "Darker is higher"
+msgstr "Ciemniejsze jest wyższe"
 
-#: /home/ruben/Projects/Cura/resources/qml/MonitorButton.qml:335
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
-msgctxt "@window:title"
-msgid "Abort print"
-msgstr "Anuluj wydruk"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
+msgctxt "@item:inlistbox"
+msgid "Lighter is higher"
+msgstr "Jaśniejszy jest wyższy"
 
-#: /home/ruben/Projects/Cura/resources/qml/MonitorButton.qml:337
-msgctxt "@label"
-msgid "Are you sure you want to abort the print?"
-msgstr "Czy na pewno chcesz przerwać drukowanie?"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:149
+msgctxt "@info:tooltip"
+msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
+msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
-msgctxt "@label"
-msgid "Extruder"
-msgstr "Ekstruder"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
+msgctxt "@item:inlistbox"
+msgid "Linear"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
-msgctxt "@tooltip"
-msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
-msgstr "Docelowa temperatura głowicy. Głowica będzie się rozgrzewać lub chłodzić do tej temperatury. Jeżeli jest równe 0, grzanie głowicy będzie wyłączone."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:172
+msgctxt "@item:inlistbox"
+msgid "Translucency"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
-msgctxt "@tooltip"
-msgid "The current temperature of this hotend."
-msgstr "Aktualna temperatura tej głowicy."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:171
+msgctxt "@info:tooltip"
+msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
+msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
-msgctxt "@tooltip of temperature input"
-msgid "The temperature to pre-heat the hotend to."
-msgstr "Temperatura do wstępnego podgrzewania głowicy."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:177
+msgctxt "@action:label"
+msgid "1mm Transmittance (%)"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
-msgctxt "@button Cancel pre-heating"
-msgid "Cancel"
-msgstr "Anuluj"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:195
+msgctxt "@info:tooltip"
+msgid "The amount of smoothing to apply to the image."
+msgstr "Ilość wygładzania do zastosowania do obrazu."
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
-msgctxt "@button"
-msgid "Pre-heat"
-msgstr "Podgrzewanie wstępne"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:200
+msgctxt "@action:label"
+msgid "Smoothing"
+msgstr "Wygładzanie"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
-msgctxt "@tooltip of pre-heat"
-msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
-msgstr "Podgrzej głowicę przed drukowaniem. Możesz w dalszym ciągu dostosowywać drukowanie podczas podgrzewania i nie będziesz musiał czekać na podgrzanie głowicy kiedy będziesz gotowy."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:227
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
+msgctxt "@action:button"
+msgid "OK"
+msgstr "OK"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
-msgctxt "@tooltip"
-msgid "The colour of the material in this extruder."
-msgstr "Kolor materiału w tym ekstruderze."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+msgctxt "@title:tab"
+msgid "Printer"
+msgstr "Drukarka"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
-msgctxt "@tooltip"
-msgid "The material in this extruder."
-msgstr "Materiał w głowicy drukującej."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
+msgctxt "@title:label"
+msgid "Nozzle Settings"
+msgstr "Ustawienia dyszy"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
-msgctxt "@tooltip"
-msgid "The nozzle inserted in this extruder."
-msgstr "Dysza włożona do tego ekstrudera."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
+msgctxt "@label"
+msgid "Nozzle size"
+msgstr "Rozmiar dyszy"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
-msgctxt "@info:status"
-msgid "The printer is not connected."
-msgstr "Drukarka nie jest podłączona."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
+msgctxt "@label"
+msgid "mm"
+msgstr "mm"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
 msgctxt "@label"
-msgid "Build plate"
-msgstr "Stół roboczy"
+msgid "Compatible material diameter"
+msgstr "Kompatybilna średnica materiału"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
-msgctxt "@tooltip"
-msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
-msgstr "Temperatura docelowa podgrzewanego stołu. Stół rozgrzeje się lub schłodzi w kierunku tej temperatury. Jeśli ustawione jest 0, grzanie stołu jest wyłączone."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
+msgctxt "@label"
+msgid "Nozzle offset X"
+msgstr "Korekcja dyszy X"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
-msgctxt "@tooltip"
-msgid "The current temperature of the heated bed."
-msgstr "Bieżąca temperatura podgrzewanego stołu."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
+msgctxt "@label"
+msgid "Nozzle offset Y"
+msgstr "Korekcja dyszy Y"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
-msgctxt "@tooltip of temperature input"
-msgid "The temperature to pre-heat the bed to."
-msgstr "Temperatura do wstępnego podgrzewania stołu."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
+msgctxt "@label"
+msgid "Cooling Fan Number"
+msgstr "Numer Wentylatora"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
-msgctxt "@tooltip of pre-heat"
-msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
-msgstr "Przed drukowaniem podgrzej stół. W dalszym ciągu można dostosowywać druk podczas nagrzewania, a nie będziesz musiał czekać na rozgrzanie stołu, gdy będziesz gotowy do drukowania."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:162
+msgctxt "@title:label"
+msgid "Extruder Start G-code"
+msgstr "Początkowy G-code ekstrudera"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:176
+msgctxt "@title:label"
+msgid "Extruder End G-code"
+msgstr "Końcowy G-code ekstrudera"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
+msgctxt "@title:label"
+msgid "Printer Settings"
+msgstr "Ustawienia drukarki"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
 msgctxt "@label"
-msgid "Printer control"
-msgstr "Kontrola drukarką"
+msgid "X (Width)"
+msgstr "X (Szerokość)"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
 msgctxt "@label"
-msgid "Jog Position"
-msgstr "Pozycja Swobodnego Ruchu"
+msgid "Y (Depth)"
+msgstr "Y (Głębokość)"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
 msgctxt "@label"
-msgid "X/Y"
-msgstr "X/Y"
+msgid "Z (Height)"
+msgstr "Z (Wysokość)"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
 msgctxt "@label"
-msgid "Z"
-msgstr "Z"
+msgid "Build plate shape"
+msgstr "Kształt stołu roboczego"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
 msgctxt "@label"
-msgid "Jog Distance"
-msgstr "Dystans Swobodnego Ruchu"
+msgid "Origin at center"
+msgstr "Początek na środku"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
 msgctxt "@label"
-msgid "Send G-code"
-msgstr "Wyślij G-code"
+msgid "Heated bed"
+msgstr "Podgrzewany stół"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
-msgctxt "@tooltip of G-code command input"
-msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
-msgstr "Wyślij niestandardową komendę G-code do podłączonej drukarki. Naciśnij 'enter', aby wysłać komendę."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
+msgctxt "@label"
+msgid "Heated build volume"
+msgstr "Grzany obszar roboczy"
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:242
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
 msgctxt "@label"
-msgid "This package will be installed after restarting."
-msgstr "Ten pakiet zostanie zainstalowany po ponownym uruchomieniu."
+msgid "G-code flavor"
+msgstr "Wersja G-code"
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:435
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:15
-msgctxt "@title:tab"
-msgid "General"
-msgstr "Ogólny"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
+msgctxt "@title:label"
+msgid "Printhead Settings"
+msgstr "Ustawienia głowicy"
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:438
-msgctxt "@title:tab"
-msgid "Settings"
-msgstr "Ustawienia"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
+msgctxt "@label"
+msgid "X min"
+msgstr "X min"
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:440
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:16
-msgctxt "@title:tab"
-msgid "Printers"
-msgstr "Drukarki"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
+msgctxt "@label"
+msgid "Y min"
+msgstr "Y min"
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:442
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:79
-msgctxt "@title:tab"
-msgid "Materials"
-msgstr "Materiał"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+msgctxt "@label"
+msgid "X max"
+msgstr "X max"
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:444
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:34
-msgctxt "@title:tab"
-msgid "Profiles"
-msgstr "Profile"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+msgctxt "@label"
+msgid "Y max"
+msgstr "Y max"
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:563
-msgctxt "@title:window"
-msgid "Closing Cura"
-msgstr "Zamykanie Cura"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+msgctxt "@label"
+msgid "Gantry Height"
+msgstr "Wysokość wózka"
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:564
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:576
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
 msgctxt "@label"
-msgid "Are you sure you want to exit Cura?"
-msgstr "Czy jesteś pewien, że chcesz zakończyć Cura?"
+msgid "Number of Extruders"
+msgstr "Liczba ekstruderów"
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:614
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
-msgctxt "@title:window"
-msgid "Open file(s)"
-msgstr "Otwórz plik(i)"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:339
+msgctxt "@label"
+msgid "Shared Heater"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:720
-msgctxt "@window:title"
-msgid "Install Package"
-msgstr "Instaluj pakiety"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:365
+msgctxt "@title:label"
+msgid "Start G-code"
+msgstr "Początkowy G-code"
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:728
-msgctxt "@title:window"
-msgid "Open File(s)"
-msgstr "Otwórz plik(i)"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:376
+msgctxt "@title:label"
+msgid "End G-code"
+msgstr "Końcowy G-code"
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:731
-msgctxt "@text:window"
-msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
-msgstr "Znaleziono jeden lub więcej plików G-code w wybranych plikach. Możesz otwierać tylko jeden plik G-code jednocześnie. Jeśli chcesz otworzyć plik G-code, proszę wybierz tylko jeden."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:100
+msgctxt "@info"
+msgid ""
+"Please make sure your printer has a connection:\n"
+"- Check if the printer is turned on.\n"
+"- Check if the printer is connected to the network.\n"
+"- Check if you are signed in to discover cloud-connected printers."
+msgstr ""
+"Upewnij się, że drukarka ma połączenie:\n"
+"- Sprawdź, czy drukarka jest włączona.\n"
+"- Sprawdź, czy drukarka jest podłączona do sieci.\n"
+"- Sprawdź, czy jesteś zalogowany, aby znaleźć drukarki podłączone do chmury."
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:834
-msgctxt "@title:window"
-msgid "Add Printer"
-msgstr "Dodaj drukarkę"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:117
+msgctxt "@info"
+msgid "Please connect your printer to the network."
+msgstr "Podłącz drukarkę do sieci."
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:842
-msgctxt "@title:window"
-msgid "What's New"
-msgstr "Co nowego"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:156
+msgctxt "@label link to technical assistance"
+msgid "View user manuals online"
+msgstr "Pokaż instrukcję użytkownika online"
 
-#: /home/ruben/Projects/Cura/resources/qml/JobSpecs.qml:99
-msgctxt "@text Print job name"
-msgid "Untitled"
-msgstr "Bez tytułu"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:45
+msgctxt "@label"
+msgid "Mesh Type"
+msgstr "Typ siatki"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintMonitor.qml:140
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:75
 msgctxt "@label"
-msgid "Active print"
-msgstr "Aktywny wydruk"
+msgid "Normal model"
+msgstr "Normalny model"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintMonitor.qml:148
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:87
 msgctxt "@label"
-msgid "Job Name"
-msgstr "Nazwa pracy"
+msgid "Print as support"
+msgstr "Drukuj jako podpora"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintMonitor.qml:156
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:99
 msgctxt "@label"
-msgid "Printing Time"
-msgstr "Czas druku"
+msgid "Modify settings for overlaps"
+msgstr "Modyfikuj ustawienia nakładania"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintMonitor.qml:164
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:111
 msgctxt "@label"
-msgid "Estimated time left"
-msgstr "Szacowany czas pozostały"
+msgid "Don't support overlaps"
+msgstr "Nie wspieraj nałożenia"
 
-#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
-msgctxt "@label:PrintjobStatus"
-msgid "Slicing..."
-msgstr "Cięcie..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:142
+msgctxt "@item:inlistbox"
+msgid "Infill mesh only"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
-msgctxt "@label:PrintjobStatus"
-msgid "Unable to slice"
-msgstr "Nie można pociąć"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:143
+msgctxt "@item:inlistbox"
+msgid "Cutting mesh"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
-msgctxt "@button"
-msgid "Processing"
-msgstr "Przetwarzanie"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:373
+msgctxt "@action:button"
+msgid "Select settings"
+msgstr "Wybierz ustawienia"
 
-#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
-msgctxt "@button"
-msgid "Slice"
-msgstr "Potnij"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
+msgctxt "@title:window"
+msgid "Select Settings to Customize for this model"
+msgstr "Wybierz Ustawienia, aby dostosować ten model"
 
-#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
-msgctxt "@label"
-msgid "Start the slicing process"
-msgstr "Rozpocznij proces cięcia"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
+msgctxt "@label:textbox"
+msgid "Filter..."
+msgstr "Filtr..."
 
-#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
-msgctxt "@button"
-msgid "Cancel"
-msgstr "Anuluj"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:70
+msgctxt "@label:checkbox"
+msgid "Show all"
+msgstr "Pokaż wszystko"
 
-#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
-msgctxt "@label"
-msgid "Time estimation"
-msgstr "Szacunkowy czas"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
+msgctxt "@title:window"
+msgid "Post Processing Plugin"
+msgstr "Plugin post-processingu"
 
-#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
 msgctxt "@label"
-msgid "Material estimation"
-msgstr "Szacunkowy materiał"
-
-#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
-msgctxt "@label m for meter"
-msgid "%1m"
-msgstr "%1m"
-
-#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
-msgctxt "@label g for grams"
-msgid "%1g"
-msgstr "%1g"
+msgid "Post Processing Scripts"
+msgstr "Skrypty post-processingu"
 
-#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
-msgctxt "@label"
-msgid "No time estimation available"
-msgstr "Szacunkowy czas niedostępny"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
+msgctxt "@action"
+msgid "Add a script"
+msgstr "Dodaj skrypt"
 
-#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
 msgctxt "@label"
-msgid "No cost estimation available"
-msgstr "Szacunkowy koszt niedostępny"
-
-#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
-msgctxt "@button"
-msgid "Preview"
-msgstr "Podgląd"
+msgid "Settings"
+msgstr "Ustawienia"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ContextMenu.qml:27
-msgctxt "@label"
-msgid "Print Selected Model With:"
-msgid_plural "Print Selected Models With:"
-msgstr[0] "Wydrukuj wybrany model z:"
-msgstr[1] "Wydrukuj wybrane modele z:"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499
+msgctxt "@info:tooltip"
+msgid "Change active post-processing scripts."
+msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ContextMenu.qml:116
-msgctxt "@title:window"
-msgid "Multiply Selected Model"
-msgid_plural "Multiply Selected Models"
-msgstr[0] "Zduplikuj wybrany model"
-msgstr[1] "Zduplikuj wybrane modele"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503
+msgctxt "@info:tooltip"
+msgid "The following script is active:"
+msgid_plural "The following scripts are active:"
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ContextMenu.qml:141
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
 msgctxt "@label"
-msgid "Number of Copies"
-msgstr "Liczba kopii"
+msgid "Color scheme"
+msgstr "Schemat kolorów"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/FileMenu.qml:13
-#: /home/ruben/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
-msgctxt "@title:menu menubar:toplevel"
-msgid "&File"
-msgstr "&Plik"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:107
+msgctxt "@label:listbox"
+msgid "Material Color"
+msgstr "Kolor materiału"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/FileMenu.qml:33
-msgctxt "@title:menu menubar:file"
-msgid "&Save..."
-msgstr "&Zapisz..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:111
+msgctxt "@label:listbox"
+msgid "Line Type"
+msgstr "Rodzaj linii"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/FileMenu.qml:54
-msgctxt "@title:menu menubar:file"
-msgid "&Export..."
-msgstr "&Eksportuj..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:115
+msgctxt "@label:listbox"
+msgid "Speed"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/FileMenu.qml:65
-msgctxt "@action:inmenu menubar:file"
-msgid "Export Selection..."
-msgstr "Eksportuj Zaznaczenie..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:119
+msgctxt "@label:listbox"
+msgid "Layer thickness"
+msgstr "Grubość warstwy"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open &Recent"
-msgstr "Otwórz &ostatnio używane"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:156
+msgctxt "@label"
+msgid "Compatibility Mode"
+msgstr "Tryb zgodności"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:25
-msgctxt "@label:category menu label"
-msgid "Network enabled printers"
-msgstr "Drukarki dostępne w sieci"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:230
+msgctxt "@label"
+msgid "Travels"
+msgstr "Ruchy"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:42
-msgctxt "@label:category menu label"
-msgid "Local printers"
-msgstr "Drukarki lokalne"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:236
+msgctxt "@label"
+msgid "Helpers"
+msgstr "Pomoce"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
-msgctxt "@header"
-msgid "Configurations"
-msgstr "Konfiguracje"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:242
+msgctxt "@label"
+msgid "Shell"
+msgstr "Obrys"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
-msgctxt "@header"
-msgid "Custom"
-msgstr "Niestandardowe"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:248
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
+msgctxt "@label"
+msgid "Infill"
+msgstr "Wypełnienie"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:298
 msgctxt "@label"
-msgid "Printer"
-msgstr "Drukarka"
+msgid "Only Show Top Layers"
+msgstr "Pokaż tylko najwyższe warstwy"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:308
 msgctxt "@label"
-msgid "Enabled"
-msgstr "Włączona"
+msgid "Show 5 Detailed Layers On Top"
+msgstr "Pokaż 5 Szczegółowych Warstw"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:251
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322
 msgctxt "@label"
-msgid "Material"
-msgstr "Materiał"
+msgid "Top / Bottom"
+msgstr "Góra/ Dół"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:378
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:326
 msgctxt "@label"
-msgid "Use glue for better adhesion with this material combination."
-msgstr "Użyj kleju dla lepszej przyczepności dla tej kombinacji materiałów."
+msgid "Inner Wall"
+msgstr "Wewnętrzna ściana"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:384
 msgctxt "@label"
-msgid "Loading available configurations from the printer..."
-msgstr "Ładowanie dostępnych konfiguracji z drukarki..."
+msgid "min"
+msgstr "min"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:433
 msgctxt "@label"
-msgid "The configurations are not available because the printer is disconnected."
-msgstr "Konfiguracje są niedostępne, ponieważ drukarka jest odłączona."
+msgid "max"
+msgstr "max"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+msgctxt "@title:window"
+msgid "More information on anonymous data collection"
+msgstr "Wiećej informacji o zbieraniu anonimowych danych"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
+msgctxt "@text:window"
+msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
+msgstr "Ultimaker Cura zbiera anonimowe dane w celu poprawy jakości druku i komfortu użytkowania. Poniżej znajduje się przykład wszystkich udostępnianych danych:"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
+msgctxt "@text:window"
+msgid "I don't want to send anonymous data"
+msgstr "Nie chcę wysyłać anonimowych danych"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
+msgctxt "@text:window"
+msgid "Allow sending anonymous data"
+msgstr "Pozwól na wysyłanie anonimowych danych"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/RatingWidget.qml:54
 msgctxt "@label"
-msgid "Select configuration"
-msgstr "Wybierz konfigurację"
+msgid "You need to login first before you can rate"
+msgstr "Musisz być zalogowany aby ocenić"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/RatingWidget.qml:54
 msgctxt "@label"
-msgid "Configurations"
-msgstr "Konfiguracje"
+msgid "You need to install the package before you can rate"
+msgstr "Musisz zainstalować pakiety zanim będziesz mógł ocenić"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:128
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/SmallRatingWidget.qml:27
 msgctxt "@label"
-msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
-msgstr "Ta konfiguracja jest niedostępna, ponieważ %1 jest nierozpoznany. Przejdź do %2, aby pobrać prawidłowy profil materiału."
+msgid "ratings"
+msgstr "oceny"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:129
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
+msgctxt "@action:button"
+msgid "Back"
+msgstr "Powrót"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
 msgctxt "@label"
-msgid "Marketplace"
-msgstr "Marketplace"
+msgid "Compatibility"
+msgstr "Zgodność"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:13
-#: /home/ruben/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:50
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Settings"
-msgstr "Opcje"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
+msgctxt "@label:table_header"
+msgid "Machine"
+msgstr "Drukarka"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:15
-msgctxt "@title:menu menubar:settings"
-msgid "&Printer"
-msgstr "&Drukarka"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
+msgctxt "@label:table_header"
+msgid "Build Plate"
+msgstr "Stół roboczy"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:27
-msgctxt "@title:menu"
-msgid "&Material"
-msgstr "&Materiał"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
+msgctxt "@label:table_header"
+msgid "Support"
+msgstr "Podpory"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:36
-msgctxt "@action:inmenu"
-msgid "Set as Active Extruder"
-msgstr "Ustaw jako aktywną głowicę"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
+msgctxt "@label:table_header"
+msgid "Quality"
+msgstr "Jakość"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:42
-msgctxt "@action:inmenu"
-msgid "Enable Extruder"
-msgstr "Włącz Ekstruder"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
+msgctxt "@action:label"
+msgid "Technical Data Sheet"
+msgstr "Dane Techniczne"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:49
-msgctxt "@action:inmenu"
-msgid "Disable Extruder"
-msgstr "Wyłącz Ekstruder"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
+msgctxt "@action:label"
+msgid "Safety Data Sheet"
+msgstr "Dane Bezpieczeństwa"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:13
-msgctxt "@label:category menu label"
-msgid "Material"
-msgstr "Materiał"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
+msgctxt "@action:label"
+msgid "Printing Guidelines"
+msgstr "Wskazówki Drukowania"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:54
-msgctxt "@label:category menu label"
-msgid "Favorites"
-msgstr "Ulubione"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
+msgctxt "@action:label"
+msgid "Website"
+msgstr "Strona Internetowa"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:79
-msgctxt "@label:category menu label"
-msgid "Generic"
-msgstr "Podstawowe"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
+msgctxt "@action:button"
+msgid "Installed"
+msgstr "Zainstalowane"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ViewMenu.qml:12
-#: /home/ruben/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:48
-msgctxt "@title:menu menubar:toplevel"
-msgid "&View"
-msgstr "&Widok"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Log in</a> is required to install or update"
+msgstr "<a href=‚%1’>Zaloguj</a> aby zainstalować lub aktualizować"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ViewMenu.qml:19
-msgctxt "@action:inmenu menubar:view"
-msgid "&Camera position"
-msgstr "&Pozycja kamery"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Buy material spools</a>"
+msgstr "<a href=‚%1’>Kup materiał na szpulach</a>"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ViewMenu.qml:44
-msgctxt "@action:inmenu menubar:view"
-msgid "Camera view"
-msgstr "Widok z kamery"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+msgctxt "@action:button"
+msgid "Update"
+msgstr "Aktualizuj"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ViewMenu.qml:47
-msgctxt "@action:inmenu menubar:view"
-msgid "Perspective"
-msgstr "Perspektywiczny"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+msgctxt "@action:button"
+msgid "Updating"
+msgstr "Aktualizowanie"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ViewMenu.qml:59
-msgctxt "@action:inmenu menubar:view"
-msgid "Orthographic"
-msgstr "Rzut ortograficzny"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+msgctxt "@action:button"
+msgid "Updated"
+msgstr "Zaktualizowano"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ViewMenu.qml:80
-msgctxt "@action:inmenu menubar:view"
-msgid "&Build plate"
-msgstr "P&ole robocze"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
+msgctxt "@label"
+msgid "Featured"
+msgstr "Polecane"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
-msgctxt "@action:inmenu"
-msgid "Visible Settings"
-msgstr "Widoczne Ustawienia"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
+msgctxt "@info:tooltip"
+msgid "Go to Web Marketplace"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
-msgctxt "@action:inmenu"
-msgid "Collapse All Categories"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
+msgctxt "@label"
+msgid "Search materials"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
-msgctxt "@action:inmenu"
-msgid "Manage Setting Visibility..."
-msgstr "Ustaw Widoczność Ustawień..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
+msgctxt "@info"
+msgid "You will need to restart Cura before changes in packages have effect."
+msgstr "Należy uruchomić ponownie Cura, aby zmiany w pakietach przyniosły efekt."
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:61
-msgctxt "@info:status"
-msgid "Calculated"
-msgstr "Przeliczone"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
+msgctxt "@info:button, %1 is the application name"
+msgid "Quit %1"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:75
-msgctxt "@title:column"
-msgid "Setting"
-msgstr "Ustawienie"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:34
+msgctxt "@title:tab"
+msgid "Plugins"
+msgstr "Wtyczki"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:82
-msgctxt "@title:column"
-msgid "Profile"
-msgstr "Profil"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:79
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:442
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
+msgctxt "@title:tab"
+msgid "Materials"
+msgstr "Materiał"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:89
-msgctxt "@title:column"
-msgid "Current"
-msgstr "Aktualny"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
+msgctxt "@title:tab"
+msgid "Installed"
+msgstr "Zainstalowano"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:97
-msgctxt "@title:column"
-msgid "Unit"
-msgstr "Jednostka"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
+msgctxt "@label"
+msgid "Will install upon restarting"
+msgstr "Zostanie zainstalowane po ponownym uruchomieniu"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
-msgctxt "@title:tab"
-msgid "Setting Visibility"
-msgstr "Widoczność ustawienia"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Log in</a> is required to update"
+msgstr "<a href='%1'>Zaloguj</a> aby aktualizować"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
-msgctxt "@label:textbox"
-msgid "Check all"
-msgstr "Zaznacz wszystko"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+msgctxt "@action:button"
+msgid "Downgrade"
+msgstr "Zainstaluj poprzednią wersję"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
-#: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
-msgctxt "@label:textbox"
-msgid "Filter..."
-msgstr "Filtr..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+msgctxt "@action:button"
+msgid "Uninstall"
+msgstr "Odinstaluj"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
+msgctxt "@action:button"
+msgid "Install"
+msgstr "Instaluj"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
 msgctxt "@title"
-msgid "Information"
-msgstr "Informacja"
+msgid "Changes from your account"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
-msgctxt "@title:window"
-msgid "Confirm Diameter Change"
-msgstr "Potwierdź Zmianę Średnicy"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+msgctxt "@button"
+msgid "Dismiss"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
-msgctxt "@label (%1 is a number)"
-msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
-msgstr "Średnica nowego filamentu została ustawiona na %1mm, i nie jest kompatybilna z bieżącym ekstruderem. Czy chcesz kontynuować?"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
+msgctxt "@button"
+msgid "Next"
+msgstr "Dalej"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
 msgctxt "@label"
-msgid "Display Name"
-msgstr "Wyświetlana nazwa"
+msgid "The following packages will be added:"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
 msgctxt "@label"
-msgid "Brand"
-msgstr "Marka"
+msgid "The following packages can not be installed because of an incompatible Cura version:"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
-msgctxt "@label"
-msgid "Material Type"
-msgstr "Typ Materiału"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
+msgctxt "@title:window"
+msgid "Confirm uninstall"
+msgstr "Potwierdź deinstalację"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
-msgctxt "@label"
-msgid "Color"
-msgstr "Kolor"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
+msgctxt "@text:window"
+msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
+msgstr "Odinstalowujesz materiały i/lub profile, które są aktualnie używane. Zatwierdzenie spowoduje przywrócenie bieżących ustawień materiału/profilu do ustawień domyślnych."
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
-msgctxt "@label"
-msgid "Properties"
-msgstr "Właściwości"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
+msgctxt "@text:window"
+msgid "Materials"
+msgstr "Materiały"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
-msgctxt "@label"
-msgid "Density"
-msgstr "Gęstość"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
+msgctxt "@text:window"
+msgid "Profiles"
+msgstr "Profile"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
-msgctxt "@label"
-msgid "Diameter"
-msgstr "Średnica"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
+msgctxt "@action:button"
+msgid "Confirm"
+msgstr "Potwierdź"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
 msgctxt "@label"
-msgid "Filament Cost"
-msgstr "Koszt Filamentu"
+msgid "You need to accept the license to install the package"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:93
 msgctxt "@label"
-msgid "Filament weight"
-msgstr "Waga filamentu"
+msgid "Website"
+msgstr "Strona internetowa"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:100
 msgctxt "@label"
-msgid "Filament length"
-msgstr "Długość Filamentu"
+msgid "Email"
+msgstr "E-mail"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:97
 msgctxt "@label"
-msgid "Cost per Meter"
-msgstr "Koszt na metr"
+msgid "Your rating"
+msgstr "Twoja ocena"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:105
 msgctxt "@label"
-msgid "This material is linked to %1 and shares some of its properties."
-msgstr "Ten materiał jest powiązany z %1 i dzieli się niekórymi swoimi właściwościami."
+msgid "Version"
+msgstr "Wersja"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:112
 msgctxt "@label"
-msgid "Unlink Material"
-msgstr "Odłącz materiał"
+msgid "Last updated"
+msgstr "Ostatnia aktualizacja"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:119
 msgctxt "@label"
-msgid "Description"
-msgstr "Opis"
+msgid "Author"
+msgstr "Autor"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:126
 msgctxt "@label"
-msgid "Adhesion Information"
-msgstr "Informacje dotyczące przyczepności"
+msgid "Downloads"
+msgstr "Pobrań"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
 msgctxt "@label"
-msgid "Print settings"
-msgstr "Ustawienia druku"
-
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:84
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:40
-msgctxt "@action:button"
-msgid "Activate"
-msgstr "Aktywuj"
-
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
-msgctxt "@action:button"
-msgid "Create"
-msgstr "Stwórz"
-
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
-msgctxt "@action:button"
-msgid "Duplicate"
-msgstr "Duplikuj"
-
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:138
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:55
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
-msgctxt "@action:button"
-msgid "Remove"
-msgstr "Usunąć"
-
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:167
-msgctxt "@action:button"
-msgid "Import"
-msgstr "Importuj"
-
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:179
-msgctxt "@action:button"
-msgid "Export"
-msgstr "Eksportuj"
-
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
-msgctxt "@action:label"
-msgid "Printer"
-msgstr "Drukarka"
-
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:274
-msgctxt "@title:window"
-msgid "Confirm Remove"
-msgstr "Potwierdź Usunięcie"
+msgid "Community Contributions"
+msgstr "Udział Społeczności"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:275
-msgctxt "@label (%1 is object name)"
-msgid "Are you sure you wish to remove %1? This cannot be undone!"
-msgstr "Czy na pewno chcesz usunąć %1? Nie można tego cofnąć!"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+msgctxt "@label"
+msgid "Community Plugins"
+msgstr "Wtyczki Społeczności"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
-msgctxt "@title:window"
-msgid "Import Material"
-msgstr "Importuj Materiał"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+msgctxt "@label"
+msgid "Generic Materials"
+msgstr "Materiały Podstawowe"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
-msgstr "Nie można zaimportować materiału <filename>%1</filename>: <message>%2</message>"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
+msgctxt "@info"
+msgid "Could not connect to the Cura Package database. Please check your connection."
+msgstr "Nie można połączyć się z bazą danych pakietów Cura. Sprawdź swoje połączenie z internetem."
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully imported material <filename>%1</filename>"
-msgstr "Udało się zaimportować materiał <filename>%1</filename>"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:16
+msgctxt "@info"
+msgid "Fetching packages..."
+msgstr "Uzyskiwanie pakietów..."
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
-msgctxt "@title:window"
-msgid "Export Material"
-msgstr "Eksportuj Materiał"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:31
+msgctxt "@description"
+msgid "Get plugins and materials verified by Ultimaker"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
-msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
-msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
-msgstr "Nie udało się wyeksportować materiału do <filename>%1</filename>: <message>%2</message>"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
+msgctxt "@title"
+msgid "Marketplace"
+msgstr "Marketplace"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully exported material to <filename>%1</filename>"
-msgstr "Udało się wyeksportować materiał do <filename>%1</filename>"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
+msgctxt "@title"
+msgid "Build Plate Leveling"
+msgstr "Poziomowanie stołu"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:104
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
 msgctxt "@label"
-msgid "Create"
-msgstr "Stwórz"
+msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
+msgstr "Aby upewnić się, że wydruki będą wychodziły świetne, możesz teraz wyregulować stół. Po kliknięciu przycisku \"Przejdź do następnego położenia\" dysza będzie się poruszać do różnych pozycji, które można wyregulować."
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
 msgctxt "@label"
-msgid "Duplicate"
-msgstr "Duplikuj"
+msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
+msgstr "Dla każdej pozycji; Włóż kartkę papieru pod dyszę i wyreguluj wysokość stołu roboczego. Wysokość stołu jest prawidłowa, gdy papier stawia lekki opór."
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:152
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:63
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
 msgctxt "@action:button"
-msgid "Rename"
-msgstr "Zmień nazwę"
-
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:202
-msgctxt "@title:window"
-msgid "Create Profile"
-msgstr "Stwórz profil"
+msgid "Start Build Plate Leveling"
+msgstr "Rozpocznij poziomowanie stołu roboczego"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:204
-msgctxt "@info"
-msgid "Please provide a name for this profile."
-msgstr "Podaj nazwę tego profilu."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
+msgctxt "@action:button"
+msgid "Move to Next Position"
+msgstr "Przejdź do następnego położenia"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:260
-msgctxt "@title:window"
-msgid "Duplicate Profile"
-msgstr "Duplikuj profil"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
+msgctxt "@label"
+msgid "Please select any upgrades made to this Ultimaker Original"
+msgstr "Proszę wybrać ulepszenia wykonane w tym Ultimaker Original"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:291
-msgctxt "@title:window"
-msgid "Rename Profile"
-msgstr "Zmień nazwę profilu"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
+msgctxt "@label"
+msgid "Heated Build Plate (official kit or self-built)"
+msgstr "Płyta grzewcza (zestaw oficjalny lub własnej roboty)"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:304
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
 msgctxt "@title:window"
-msgid "Import Profile"
-msgstr "Importuj Profil"
+msgid "Connect to Networked Printer"
+msgstr "Połącz się z drukarką sieciową"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:333
-msgctxt "@title:window"
-msgid "Export Profile"
-msgstr "Eksportuj Profil"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+msgctxt "@label"
+msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
+msgstr "Aby drukować bezpośrednio na drukarce przez sieć, upewnij się, że drukarka jest podłączona do sieci za pomocą kabla sieciowego lub do sieci WIFI. Jeśli nie podłączysz Cury do drukarki, możesz nadal używać napędu USB do przesyłania plików G-Code do drukarki."
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:396
-msgctxt "@label %1 is printer name"
-msgid "Printer: %1"
-msgstr "Drukarka: %1"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+msgctxt "@label"
+msgid "Select your printer from the list below:"
+msgstr "Wybierz swoją drukarkę z poniższej listy:"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:554
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
 msgctxt "@action:button"
-msgid "Update profile with current settings/overrides"
-msgstr "Aktualizuj profil z bieżącymi ustawieniami"
+msgid "Edit"
+msgstr "Edycja"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:561
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:258
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:55
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:138
 msgctxt "@action:button"
-msgid "Discard current changes"
-msgstr "Odrzuć bieżące zmiany"
-
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:580
-msgctxt "@action:label"
-msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
-msgstr "Ten profil używa ustawień domyślnych określonych przez drukarkę, dlatego nie ma żadnych ustawień z poniższej liście."
-
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:588
-msgctxt "@action:label"
-msgid "Your current settings match the selected profile."
-msgstr "Aktualne ustawienia odpowiadają wybranemu profilowi."
+msgid "Remove"
+msgstr "Usunąć"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:606
-msgctxt "@title:tab"
-msgid "Global Settings"
-msgstr "Ustawienia ogólne"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
+msgctxt "@action:button"
+msgid "Refresh"
+msgstr "Odśwież"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:132
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
 msgctxt "@label"
-msgid "Interface"
-msgstr "Interfejs"
+msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
+msgstr "Jeżeli twojej drukarki nie ma na liście, przeczytaj <a href='%1'>poradnik o problemach z drukowaniem przez sieć</a>"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:143
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
 msgctxt "@label"
-msgid "Language:"
-msgstr "Język:"
+msgid "Type"
+msgstr "Rodzaj"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:210
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
 msgctxt "@label"
-msgid "Currency:"
-msgstr "Waluta:"
+msgid "Firmware version"
+msgstr "Wersja oprogramowania"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:223
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
 msgctxt "@label"
-msgid "Theme:"
-msgstr "Motyw:"
+msgid "Address"
+msgstr "Adres"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:279
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
 msgctxt "@label"
-msgid "You will need to restart the application for these changes to have effect."
-msgstr "Musisz zrestartować aplikację, aby te zmiany zaczęły obowiązywać."
-
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:296
-msgctxt "@info:tooltip"
-msgid "Slice automatically when changing settings."
-msgstr "Tnij automatycznie podczas zmiany ustawień."
-
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:304
-msgctxt "@option:check"
-msgid "Slice automatically"
-msgstr "Automatyczne Cięcie"
+msgid "This printer is not set up to host a group of printers."
+msgstr "Ta drukarka nie jest skonfigurowana jako host dla grupy drukarek."
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:318
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
 msgctxt "@label"
-msgid "Viewport behavior"
-msgstr "Zachowanie okna edycji"
-
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:326
-msgctxt "@info:tooltip"
-msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly."
-msgstr "Zaznacz nieobsługiwane obszary modelu na czerwono. Bez wsparcia te obszary nie będą drukowane prawidłowo."
-
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:335
-msgctxt "@option:check"
-msgid "Display overhang"
-msgstr "Wyświetl zwis"
+msgid "This printer is the host for a group of %1 printers."
+msgstr "Ta drukarka jest hostem grupy %1 drukarek."
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:343
-msgctxt "@info:tooltip"
-msgid "Moves the camera so the model is in the center of the view when a model is selected"
-msgstr "Przenosi kamerę, aby model był w centrum widoku, gdy wybrano model"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
+msgctxt "@label"
+msgid "The printer at this address has not yet responded."
+msgstr "Drukarka pod tym adresem jeszcze nie odpowiedziała."
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:348
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
 msgctxt "@action:button"
-msgid "Center camera when item is selected"
-msgstr "Wyśrodkuj kamerę kiedy przedmiot jest zaznaczony"
+msgid "Connect"
+msgstr "Połącz"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:358
-msgctxt "@info:tooltip"
-msgid "Should the default zoom behavior of cura be inverted?"
-msgstr "Czy domyślne zachowanie zoomu powinno zostać odwrócone?"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
+msgctxt "@title:window"
+msgid "Invalid IP address"
+msgstr "Nieprawidłowy adres IP"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:363
-msgctxt "@action:button"
-msgid "Invert the direction of camera zoom."
-msgstr "Odwróć kierunek zoomu kamery."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
+msgctxt "@text"
+msgid "Please enter a valid IP address."
+msgstr "Proszę podać poprawny adres IP."
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:379
-msgctxt "@info:tooltip"
-msgid "Should zooming move in the direction of the mouse?"
-msgstr "Czy przybliżanie powinno poruszać się w kierunku myszy?"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
+msgctxt "@title:window"
+msgid "Printer Address"
+msgstr "Adres drukarki"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:379
-msgctxt "@info:tooltip"
-msgid "Zooming towards the mouse is not supported in the orthographic perspective."
-msgstr "Powiększanie w kierunku myszy nie jest obsługiwane w danej perspektywie."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
+msgctxt "@label"
+msgid "Enter the IP address of your printer on the network."
+msgstr "Wprowadź adres IP drukarki."
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:384
-msgctxt "@action:button"
-msgid "Zoom toward mouse direction"
-msgstr "Przybliżaj w kierunku myszy"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
+msgctxt "@title:window"
+msgid "Configuration Changes"
+msgstr "Zmiany konfiguracji"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:410
-msgctxt "@info:tooltip"
-msgid "Should models on the platform be moved so that they no longer intersect?"
-msgstr "Czy modele na platformie powinny być przenoszone w taki sposób, aby nie przecinały się?"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+msgctxt "@action:button"
+msgid "Override"
+msgstr "Nadpisz"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:415
-msgctxt "@option:check"
-msgid "Ensure models are kept apart"
-msgstr "Upewnij się, że modele są oddzielone"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
+msgctxt "@label"
+msgid "The assigned printer, %1, requires the following configuration change:"
+msgid_plural "The assigned printer, %1, requires the following configuration changes:"
+msgstr[0] "Przypisana drukarka, %1, wymaga następującej zmiany konfiguracji:"
+msgstr[1] "Przypisana drukarka, %1, wymaga następujących zmian konfiguracji:"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:424
-msgctxt "@info:tooltip"
-msgid "Should models on the platform be moved down to touch the build plate?"
-msgstr "Czy modele na platformie powinny być przesunięte w dół, aby dotknęły stołu roboczego?"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
+msgctxt "@label"
+msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
+msgstr "Drukarka %1 jest przypisana, ale zadanie zawiera nieznaną konfigurację materiału."
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:429
-msgctxt "@option:check"
-msgid "Automatically drop models to the build plate"
-msgstr "Automatycznie upuść modele na stół roboczy"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
+msgctxt "@label"
+msgid "Change material %1 from %2 to %3."
+msgstr "Zmień materiał %1 z %2 na %3."
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:441
-msgctxt "@info:tooltip"
-msgid "Show caution message in g-code reader."
-msgstr "Pokaż wiadomości ostrzegawcze w czytniku g-code."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
+msgctxt "@label"
+msgid "Load %3 as material %1 (This cannot be overridden)."
+msgstr "Załaduj %3 jako materiał %1 (Nie można nadpisać)."
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:450
-msgctxt "@option:check"
-msgid "Caution message in g-code reader"
-msgstr "Wiadomość ostrzegawcza w czytniku g-code"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
+msgctxt "@label"
+msgid "Change print core %1 from %2 to %3."
+msgstr "Zmień rdzeń drukujący %1 z %2 na %3."
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:458
-msgctxt "@info:tooltip"
-msgid "Should layer be forced into compatibility mode?"
-msgstr "Czy warstwa powinna być wymuszona w trybie zgodności?"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
+msgctxt "@label"
+msgid "Change build plate to %1 (This cannot be overridden)."
+msgstr "Zmień stół na %1 (Nie można nadpisać)."
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:463
-msgctxt "@option:check"
-msgid "Force layer view compatibility mode (restart required)"
-msgstr "Wymuszenie widoku warstw w trybie zgodności (wymaga ponownego uruchomienia)"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
+msgctxt "@label"
+msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
+msgstr "Nadpisanie spowoduje użycie określonych ustawień w istniejącej konfiguracji drukarki. Może to spowodować niepowodzenie druku."
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:473
-msgctxt "@info:tooltip"
-msgid "Should Cura open at the location it was closed?"
-msgstr "Czy Cura powinna się otwierać w miejscu, w którym została zamknięta?"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:192
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
+msgctxt "@label"
+msgid "Glass"
+msgstr "Szkło"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:478
-msgctxt "@option:check"
-msgid "Restore window position on start"
-msgstr "Przywróć pozycję okna przy starcie"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
+msgctxt "@label"
+msgid "Aluminum"
+msgstr "Aluminum"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:488
-msgctxt "@info:tooltip"
-msgid "What type of camera rendering should be used?"
-msgstr "Jakiego rodzaju kamery należy użyć do renderowania?"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
+msgctxt "@label"
+msgid "Move to top"
+msgstr "Przesuń na początek"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:495
-msgctxt "@window:text"
-msgid "Camera rendering:"
-msgstr "Renderowanie z kamery: "
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
+msgctxt "@label"
+msgid "Delete"
+msgstr "Usuń"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:506
-msgid "Perspective"
-msgstr "Perspektywiczny"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:289
+msgctxt "@label"
+msgid "Resume"
+msgstr "Ponów"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:507
-msgid "Orthographic"
-msgstr "Rzut ortograficzny"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
+msgctxt "@label"
+msgid "Pausing..."
+msgstr "Zatrzymywanie..."
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:538
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
 msgctxt "@label"
-msgid "Opening and saving files"
-msgstr "Otwieranie i zapisywanie plików"
+msgid "Resuming..."
+msgstr "Przywracanie..."
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:545
-msgctxt "@info:tooltip"
-msgid "Should models be scaled to the build volume if they are too large?"
-msgstr "Czy modele powinny być skalowane do wielkości obszaru roboczego, jeśli są zbyt duże?"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:284
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:293
+msgctxt "@label"
+msgid "Pause"
+msgstr "Wstrzymaj"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:550
-msgctxt "@option:check"
-msgid "Scale large models"
-msgstr "Skaluj duże modele"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+msgctxt "@label"
+msgid "Aborting..."
+msgstr "Przerywanie..."
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:560
-msgctxt "@info:tooltip"
-msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?"
-msgstr "Model może wydawać się bardzo mały, jeśli jego jednostka jest na przykład w metrach, a nie w milimetrach. Czy takie modele powinny być skalowane?"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+msgctxt "@label"
+msgid "Abort"
+msgstr "Anuluj"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:565
-msgctxt "@option:check"
-msgid "Scale extremely small models"
-msgstr "Skaluj bardzo małe modele"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
+msgctxt "@label %1 is the name of a print job."
+msgid "Are you sure you want to move %1 to the top of the queue?"
+msgstr "Czy jesteś pewien, że chcesz przesunąć %1 na początek kolejki?"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:575
-msgctxt "@info:tooltip"
-msgid "Should models be selected after they are loaded?"
-msgstr "Czy modele powinny zostać zaznaczone po załadowaniu?"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
+msgctxt "@window:title"
+msgid "Move print job to top"
+msgstr "Przesuń zadanie drukowania na początek"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:580
-msgctxt "@option:check"
-msgid "Select models when loaded"
-msgstr "Zaznaczaj modele po załadowaniu"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
+msgctxt "@label %1 is the name of a print job."
+msgid "Are you sure you want to delete %1?"
+msgstr "Czy jesteś pewien, że chcesz usunąć %1?"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:590
-msgctxt "@info:tooltip"
-msgid "Should a prefix based on the printer name be added to the print job name automatically?"
-msgstr "Czy przedrostek oparty na nazwie drukarki powinien być automatycznie dodawany do nazwy zadania?"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
+msgctxt "@window:title"
+msgid "Delete print job"
+msgstr "Usuń zadanie drukowania"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:595
-msgctxt "@option:check"
-msgid "Add machine prefix to job name"
-msgstr "Dodaj przedrostek maszyny do nazwy zadania"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
+msgctxt "@label %1 is the name of a print job."
+msgid "Are you sure you want to abort %1?"
+msgstr "Czy jesteś pewien, że chcesz anulować %1?"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:605
-msgctxt "@info:tooltip"
-msgid "Should a summary be shown when saving a project file?"
-msgstr "Czy podsumowanie powinno być wyświetlane podczas zapisu projektu?"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:335
+msgctxt "@window:title"
+msgid "Abort print"
+msgstr "Anuluj wydruk"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:609
-msgctxt "@option:check"
-msgid "Show summary dialog when saving project"
-msgstr "Pokaż okno podsumowania podczas zapisywaniu projektu"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:155
+msgctxt "@label link to Connect and Cloud interfaces"
+msgid "Manage printer"
+msgstr "Zarządzaj drukarkami"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:619
-msgctxt "@info:tooltip"
-msgid "Default behavior when opening a project file"
-msgstr "Domyślne zachowanie podczas otwierania pliku projektu"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:256
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:514
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
+msgctxt "@info"
+msgid "Please update your printer's firmware to manage the queue remotely."
+msgstr "Zaktualizuj oprogramowanie drukarki, aby zdalnie zarządzać kolejką."
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:627
-msgctxt "@window:text"
-msgid "Default behavior when opening a project file: "
-msgstr "Domyślne zachowanie podczas otwierania pliku projektu: "
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:289
+msgctxt "@info"
+msgid "The webcam is not available because you are monitoring a cloud printer."
+msgstr "Kamera nie jest dostępna, ponieważ nadzorujesz drukarkę w chmurze."
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:641
-msgctxt "@option:openProject"
-msgid "Always ask me this"
-msgstr "Zawsze pytaj"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
+msgctxt "@label:status"
+msgid "Loading..."
+msgstr "Wczytywanie..."
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:642
-msgctxt "@option:openProject"
-msgid "Always open as a project"
-msgstr "Zawsze otwieraj jako projekt"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
+msgctxt "@label:status"
+msgid "Unavailable"
+msgstr "Niedostępne"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:643
-msgctxt "@option:openProject"
-msgid "Always import models"
-msgstr "Zawsze importuj modele"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
+msgctxt "@label:status"
+msgid "Unreachable"
+msgstr "Nieosiągalna"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:679
-msgctxt "@info:tooltip"
-msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
-msgstr "Kiedy dokonasz zmian w profilu i przełączysz się na inny, zostanie wyświetlone okno z pytaniem, czy chcesz zachować twoje zmiany, czy nie. Możesz też wybrać domyślne zachowanie, żeby to okno już nigdy nie było pokazywane."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
+msgctxt "@label:status"
+msgid "Idle"
+msgstr "Zajęta"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:688
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:401
 msgctxt "@label"
-msgid "Profiles"
-msgstr "Profile"
-
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:693
-msgctxt "@window:text"
-msgid "Default behavior for changed setting values when switching to a different profile: "
-msgstr "Domyślne zachowanie dla zmienionych ustawień podczas zmiany profilu na inny: "
-
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:707
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:156
-msgctxt "@option:discardOrKeep"
-msgid "Always ask me this"
-msgstr "Zawsze pytaj o to"
-
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:708
-msgctxt "@option:discardOrKeep"
-msgid "Always discard changed settings"
-msgstr "Zawsze odrzucaj wprowadzone zmiany"
-
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:709
-msgctxt "@option:discardOrKeep"
-msgid "Always transfer changed settings to new profile"
-msgstr "Zawsze przenoś wprowadzone zmiany do nowego profilu"
+msgid "Untitled"
+msgstr "Bez tytułu"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:743
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:422
 msgctxt "@label"
-msgid "Privacy"
-msgstr "Prywatność"
-
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:750
-msgctxt "@info:tooltip"
-msgid "Should Cura check for updates when the program is started?"
-msgstr "Czy Cura ma sprawdzać dostępność aktualizacji podczas uruchamiania programu?"
-
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:755
-msgctxt "@option:check"
-msgid "Check for updates on start"
-msgstr "Sprawdź, dostępność aktualizacji podczas uruchamiania"
-
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:765
-msgctxt "@info:tooltip"
-msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored."
-msgstr "Czy anonimowe dane na temat wydruku mają być wysyłane do Ultimaker? Uwaga. Żadne modele, adresy IP, ani żadne inne dane osobiste nie będą wysyłane i/lub przechowywane."
+msgid "Anonymous"
+msgstr "Anonimowa"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:770
-msgctxt "@option:check"
-msgid "Send (anonymous) print information"
-msgstr "Wyślij (anonimowe) informacje o drukowaniu"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:449
+msgctxt "@label:status"
+msgid "Requires configuration changes"
+msgstr "Wymaga zmian konfiguracji"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:779
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:487
 msgctxt "@action:button"
-msgid "More information"
-msgstr "Więcej informacji"
-
-#: /home/ruben/Projects/Cura/resources/qml/ViewsSelector.qml:50
-msgctxt "@label"
-msgid "View type"
-msgstr "Typ widoku"
-
-#: /home/ruben/Projects/Cura/resources/qml/ObjectSelector.qml:59
-msgctxt "@label"
-msgid "Object list"
-msgstr "Lista obiektów"
-
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:42
-msgctxt "@label"
-msgid "There is no printer found over your network."
-msgstr "Nie znaleziono drukarki w Twojej sieci."
-
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:180
-msgctxt "@label"
-msgid "Refresh"
-msgstr "Odśwież"
-
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:191
-msgctxt "@label"
-msgid "Add printer by IP"
-msgstr "Dodaj drukarkę przez IP"
+msgid "Details"
+msgstr "Szczegóły"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:224
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
 msgctxt "@label"
-msgid "Troubleshooting"
-msgstr "Rozwiązywanie problemów"
+msgid "Unavailable printer"
+msgstr "Drukarka niedostępna"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:36
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
 msgctxt "@label"
-msgid "Ultimaker Cloud"
-msgstr "Chmura Ultimaker"
-
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:77
-msgctxt "@text"
-msgid "The next generation 3D printing workflow"
-msgstr "Nowa generacja systemu drukowania 3D"
-
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:94
-msgctxt "@text"
-msgid "- Send print jobs to Ultimaker printers outside your local network"
-msgstr "- Wysyłaj zadania druku do drukarek Ultimaker poza siecią lokalną"
-
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:97
-msgctxt "@text"
-msgid "- Store your Ultimaker Cura settings in the cloud for use anywhere"
-msgstr "- Przechowuj ustawienia Ultimaker Cura w chmurze, aby używać w każdym miejscu"
+msgid "First available"
+msgstr "Pierwsza dostępna"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:100
-msgctxt "@text"
-msgid "- Get exclusive access to print profiles from leading brands"
-msgstr "- Uzyskaj wyłączny dostęp do profili materiałów wiodących marek"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
+msgctxt "@label:status"
+msgid "Aborted"
+msgstr "Anulowano"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:119
-msgctxt "@button"
-msgid "Finish"
-msgstr "Koniec"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
+msgctxt "@label:status"
+msgid "Finished"
+msgstr "Zakończono"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:128
-msgctxt "@button"
-msgid "Create an account"
-msgstr "Stwórz konto"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
+msgctxt "@label:status"
+msgid "Preparing..."
+msgstr "Przygotowyję..."
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:138
-#: /home/ruben/Projects/Cura/resources/qml/Account/GeneralOperations.qml:68
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:48
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
-msgctxt "@button"
-msgid "Sign in"
-msgstr "Zaloguj"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
+msgctxt "@label:status"
+msgid "Aborting..."
+msgstr "Przerywanie..."
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
-msgctxt "@label"
-msgid "Add printer by IP address"
-msgstr "Dodaj drukarkę przez IP"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
+msgctxt "@label:status"
+msgid "Pausing..."
+msgstr "Zatrzymywanie..."
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
-msgctxt "@label"
-msgid "Enter the IP address of your printer on the network."
-msgstr "Wprowadź adres IP drukarki."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
+msgctxt "@label:status"
+msgid "Paused"
+msgstr "Wstrzymana"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
-msgctxt "@text"
-msgid "Place enter your printer's IP address."
-msgstr "Wprowadź adres IP drukarki."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
+msgctxt "@label:status"
+msgid "Resuming..."
+msgstr "Przywracanie..."
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
-msgctxt "@text"
-msgid "Please enter a valid IP address."
-msgstr "Proszę podać poprawny adres IP."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
+msgctxt "@label:status"
+msgid "Action required"
+msgstr "Konieczne są działania"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
-msgctxt "@button"
-msgid "Add"
-msgstr "Dodaj"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
+msgctxt "@label:status"
+msgid "Finishes %1 at %2"
+msgstr "Zakończone %1 z %2"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:204
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
 msgctxt "@label"
-msgid "Could not connect to device."
-msgstr "Nie można połączyć się z urządzeniem."
+msgid "Queued"
+msgstr "W kolejce"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:208
-msgctxt "@label"
-msgid "The printer at this address has not responded yet."
-msgstr "Drukarka pod tym adresem jeszcze nie odpowiedziała."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:67
+msgctxt "@label link to connect manager"
+msgid "Manage in browser"
+msgstr "Zarządzaj w przeglądarce"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:240
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:100
 msgctxt "@label"
-msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
-msgstr "Ta drukarka nie może zostać dodana, ponieważ jest nieznana lub nie jest hostem grupy."
+msgid "There are no print jobs in the queue. Slice and send a job to add one."
+msgstr "W kolejce nie ma zadań drukowania. Potnij i wyślij zadanie, aby dodać."
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:258
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:115
 msgctxt "@label"
-msgid "Type"
-msgstr "Rodzaj"
+msgid "Print jobs"
+msgstr "Zadania druku"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:274
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:131
 msgctxt "@label"
-msgid "Firmware version"
-msgstr "Wersja oprogramowania"
+msgid "Total print time"
+msgstr "Łączny czas druku"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:290
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:147
 msgctxt "@label"
-msgid "Address"
-msgstr "Adres"
-
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:329
-msgctxt "@button"
-msgid "Back"
-msgstr "Wstecz"
+msgid "Waiting for"
+msgstr "Oczekiwanie na"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:342
-msgctxt "@button"
-msgid "Connect"
-msgstr "Połącz"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
+msgctxt "@title:window"
+msgid "Print over network"
+msgstr "Drukuj przez sieć"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-msgctxt "@button"
-msgid "Next"
-msgstr "Dalej"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
+msgctxt "@action:button"
+msgid "Print"
+msgstr "Drukuj"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
 msgctxt "@label"
-msgid "Help us to improve Ultimaker Cura"
-msgstr "Pomóż nam ulepszyć Ultimaker Cura"
-
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
-msgctxt "@text"
-msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
-msgstr "Ultimaker Cura zbiera anonimowe dane w celu poprawy jakości druku i komfortu użytkownika, w tym:"
-
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
-msgctxt "@text"
-msgid "Machine types"
-msgstr "Typy maszyn"
+msgid "Printer selection"
+msgstr "Wybór drukarki"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
-msgctxt "@text"
-msgid "Material usage"
-msgstr "Zużycie materiału"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/AccountWidget.qml:24
+msgctxt "@action:button"
+msgid "Sign in"
+msgstr "Zaloguj"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
-msgctxt "@text"
-msgid "Number of slices"
-msgstr "Ilość warstw"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:40
+msgctxt "@label"
+msgid "Your key to connected 3D printing"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:51
 msgctxt "@text"
-msgid "Print settings"
-msgstr "Ustawienia druku"
+msgid ""
+"- Customize your experience with more print profiles and plugins\n"
+"- Stay flexible by syncing your setup and loading it anywhere\n"
+"- Increase efficiency with a remote workflow on Ultimaker printers"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
-msgctxt "@text"
-msgid "Data collected by Ultimaker Cura will not contain any personal information."
-msgstr "Dane zebrane przez Ultimaker Cura nie będą zawierać żadnych prywatnych danych osobowych."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:78
+msgctxt "@button"
+msgid "Create account"
+msgstr "Utwórz konto"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
-msgctxt "@text"
-msgid "More information"
-msgstr "Więcej informacji"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:22
+msgctxt "@label The argument is a username."
+msgid "Hi %1"
+msgstr "Cześć %1"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
-msgctxt "@label"
-msgid "Add a printer"
-msgstr "Dodaj drukarkę"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:33
+msgctxt "@button"
+msgid "Ultimaker account"
+msgstr "Konto Ultimaker"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
-msgctxt "@label"
-msgid "Add a networked printer"
-msgstr "Dodaj drukarkę sieciową"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:42
+msgctxt "@button"
+msgid "Sign out"
+msgstr "Wyloguj"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:81
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
 msgctxt "@label"
-msgid "Add a non-networked printer"
-msgstr "Dodaj drukarkę niesieciową"
+msgid "No time estimation available"
+msgstr "Szacunkowy czas niedostępny"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
 msgctxt "@label"
-msgid "User Agreement"
-msgstr "Umowa z użytkownikiem"
+msgid "No cost estimation available"
+msgstr "Szacunkowy koszt niedostępny"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
 msgctxt "@button"
-msgid "Decline and close"
-msgstr "Odrzuć i zamknij"
+msgid "Preview"
+msgstr "Podgląd"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:212
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
 msgctxt "@label"
-msgid "Printer name"
-msgstr "Nazwa drukarki"
-
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:225
-msgctxt "@text"
-msgid "Please give your printer a name"
-msgstr "Podaj nazwę drukarki"
+msgid "Time estimation"
+msgstr "Szacunkowy czas"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
 msgctxt "@label"
-msgid "Empty"
-msgstr "Pusty"
+msgid "Material estimation"
+msgstr "Szacunkowy materiał"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:24
-msgctxt "@label"
-msgid "What's new in Ultimaker Cura"
-msgstr "Co nowego w Ultimaker Cura"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
+msgctxt "@label m for meter"
+msgid "%1m"
+msgstr "%1m"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:29
-msgctxt "@label"
-msgid "Welcome to Ultimaker Cura"
-msgstr "Witaj w Ultimaker Cura"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
+msgctxt "@label g for grams"
+msgid "%1g"
+msgstr "%1g"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:47
-msgctxt "@text"
-msgid ""
-"Please follow these steps to set up\n"
-"Ultimaker Cura. This will only take a few moments."
-msgstr ""
-"Wykonaj poniższe kroki, aby skonfigurować\n"
-"Ultimaker Cura. To zajmie tylko kilka chwil."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
+msgctxt "@label:PrintjobStatus"
+msgid "Slicing..."
+msgstr "Cięcie..."
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:58
-msgctxt "@button"
-msgid "Get started"
-msgstr "Rozpocznij"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
+msgctxt "@label:PrintjobStatus"
+msgid "Unable to slice"
+msgstr "Nie można pociąć"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:166
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
 msgctxt "@button"
-msgid "Add printer"
-msgstr "Dodaj drukarkę"
+msgid "Processing"
+msgstr "Przetwarzanie"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:182
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
 msgctxt "@button"
-msgid "Manage printers"
-msgstr "Zarządzaj drukarkami"
+msgid "Slice"
+msgstr "Potnij"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
 msgctxt "@label"
-msgid "Connected printers"
-msgstr "Podłączone drukarki"
+msgid "Start the slicing process"
+msgstr "Rozpocznij proces cięcia"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
-msgctxt "@label"
-msgid "Preset printers"
-msgstr "Zdefiniowane drukarki"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
+msgctxt "@button"
+msgid "Cancel"
+msgstr "Anuluj"
 
-#: /home/ruben/Projects/Cura/resources/qml/ExtruderButton.qml:16
-msgctxt "@label %1 is filled in with the name of an extruder"
-msgid "Print Selected Model with %1"
-msgid_plural "Print Selected Models with %1"
-msgstr[0] "Drukuj Wybrany Model z %1"
-msgstr[1] "Drukuj Wybrane Modele z %1"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:82
+msgctxt "@action:inmenu"
+msgid "Show Online Troubleshooting Guide"
+msgstr "Pokaż przewodnik rozwiązywania problemów online"
 
-#: /home/ruben/Projects/Cura/resources/qml/ViewOrientationControls.qml:27
-msgctxt "@info:tooltip"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:89
+msgctxt "@action:inmenu"
+msgid "Toggle Full Screen"
+msgstr "Przełącz tryb pełnoekranowy"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:97
+msgctxt "@action:inmenu"
+msgid "Exit Full Screen"
+msgstr "Wyłącz tryb pełnoekranowy"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:104
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Undo"
+msgstr "&Cofnij"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:114
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Redo"
+msgstr "&Ponów"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:124
+msgctxt "@action:inmenu menubar:file"
+msgid "&Quit"
+msgstr "&Zamknij"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:132
+msgctxt "@action:inmenu menubar:view"
 msgid "3D View"
 msgstr "Widok 3D"
 
-#: /home/ruben/Projects/Cura/resources/qml/ViewOrientationControls.qml:40
-msgctxt "@info:tooltip"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:139
+msgctxt "@action:inmenu menubar:view"
 msgid "Front View"
 msgstr "Widok z przodu"
 
-#: /home/ruben/Projects/Cura/resources/qml/ViewOrientationControls.qml:53
-msgctxt "@info:tooltip"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:146
+msgctxt "@action:inmenu menubar:view"
 msgid "Top View"
 msgstr "Widok z góry"
 
-#: /home/ruben/Projects/Cura/resources/qml/ViewOrientationControls.qml:66
-msgctxt "@info:tooltip"
-msgid "Left View"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:153
+msgctxt "@action:inmenu menubar:view"
+msgid "Left Side View"
 msgstr "Widok z lewej strony"
 
-#: /home/ruben/Projects/Cura/resources/qml/ViewOrientationControls.qml:79
-msgctxt "@info:tooltip"
-msgid "Right View"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:160
+msgctxt "@action:inmenu menubar:view"
+msgid "Right Side View"
 msgstr "Widok z prawej strony"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:160
-msgctxt "@label:header"
-msgid "Custom profiles"
-msgstr "Profile niestandardowe"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:167
+msgctxt "@action:inmenu"
+msgid "Configure Cura..."
+msgstr "Konfiguruj Cura..."
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
-msgctxt "@label"
-msgid "Profile"
-msgstr "Profil"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:174
+msgctxt "@action:inmenu menubar:printer"
+msgid "&Add Printer..."
+msgstr "&Dodaj drukarkę..."
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:172
-msgctxt "@tooltip"
-msgid ""
-"Some setting/override values are different from the values stored in the profile.\n"
-"\n"
-"Click to open the profile manager."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:180
+msgctxt "@action:inmenu menubar:printer"
+msgid "Manage Pr&inters..."
+msgstr "Zarządzaj drukarkami..."
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:187
+msgctxt "@action:inmenu"
+msgid "Manage Materials..."
+msgstr "Zarządzaj materiałami..."
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:195
+msgctxt "@action:inmenu"
+msgid "Add more materials from Marketplace"
 msgstr ""
-"Niektóre wartości ustawień różnią się od wartości zapisanych w profilu.\n"
-"\n"
-"Kliknij, aby otworzyć menedżer profili."
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
-msgctxt "@label:Should be short"
-msgid "On"
-msgstr "Wł"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:202
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Update profile with current settings/overrides"
+msgstr "&Aktualizuj profil z bieżącymi ustawieniami"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
-msgctxt "@label:Should be short"
-msgid "Off"
-msgstr "Wył"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:210
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Discard current changes"
+msgstr "&Odrzuć bieżące zmiany"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
-msgctxt "@label"
-msgid "Experimental"
-msgstr "Eksperymentalne"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:222
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Create profile from current settings/overrides..."
+msgstr "&Utwórz profil z bieżących ustawień..."
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
-msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
-msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
-msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
-msgstr[0] "Nie ma profilu %1 dla konfiguracji w ekstruderze %2. Zamiast tego zostaną użyte domyślne cale"
-msgstr[1] "Nie ma profilu %1 dla konfiguracji w ekstruderach %2. Zamiast tego zostaną użyte domyślne cale"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:228
+msgctxt "@action:inmenu menubar:profile"
+msgid "Manage Profiles..."
+msgstr "Zarządzaj profilami..."
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
-msgctxt "@label"
-msgid "Support"
-msgstr "Podpory"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:236
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Online &Documentation"
+msgstr "Pokaż dokumentację internetową"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
-msgctxt "@label"
-msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
-msgstr "Generuje podpory wspierające części modelu, które mają zwis. Bez tych podpór takie części mogłyby spaść podczas drukowania."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:244
+msgctxt "@action:inmenu menubar:help"
+msgid "Report a &Bug"
+msgstr "Zgłoś błąd"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:248
-msgctxt "@label"
-msgid "Infill"
-msgstr "Wypełnienie"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:252
+msgctxt "@action:inmenu menubar:help"
+msgid "What's New"
+msgstr "Co nowego"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
-msgctxt "@label"
-msgid "Gradual infill"
-msgstr "Stopniowe wypełnienie"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:258
+msgctxt "@action:inmenu menubar:help"
+msgid "About..."
+msgstr "O..."
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
-msgctxt "@label"
-msgid "Gradual infill will gradually increase the amount of infill towards the top."
-msgstr "Stopniowe wypełnienie stopniowo zwiększa ilość wypełnień w górę."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:265
+msgctxt "@action:inmenu menubar:edit"
+msgid "Delete Selected Model"
+msgid_plural "Delete Selected Models"
+msgstr[0] "Usuń wybrany model"
+msgstr[1] "Usuń wybrane modele"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
-msgctxt "@tooltip"
-msgid "You have modified some profile settings. If you want to change these go to custom mode."
-msgstr "Zmodyfikowałeś ustawienia profilu. Jeżeli chcesz je zmienić, przejdź do trybu niestandardowego."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:275
+msgctxt "@action:inmenu menubar:edit"
+msgid "Center Selected Model"
+msgid_plural "Center Selected Models"
+msgstr[0] "Wyśrodkuj wybrany model"
+msgstr[1] "Wyśrodkuj wybrane modele"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
-msgctxt "@label"
-msgid "Adhesion"
-msgstr "Przyczepność"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:284
+msgctxt "@action:inmenu menubar:edit"
+msgid "Multiply Selected Model"
+msgid_plural "Multiply Selected Models"
+msgstr[0] "Rozmnóż wybrany model"
+msgstr[1] "Rozmnóż wybrane modele"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
-msgctxt "@label"
-msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
-msgstr "Włącz drukowanie obrysu lub tratwy. Spowoduje to dodanie płaskiej powierzchni wokół lub pod Twoim obiektem, która jest łatwa do usunięcia po wydruku."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:293
+msgctxt "@action:inmenu"
+msgid "Delete Model"
+msgstr "Usuń model"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
-msgctxt "@button"
-msgid "Recommended"
-msgstr "Polecane"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:301
+msgctxt "@action:inmenu"
+msgid "Ce&nter Model on Platform"
+msgstr "Wyśrodkuj model na platformie"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
-msgctxt "@button"
-msgid "Custom"
-msgstr "Niestandardowe"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:307
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Group Models"
+msgstr "&Grupuj modele"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
-msgctxt "@label shown when we load a Gcode file"
-msgid "Print setup disabled. G-code file can not be modified."
-msgstr "Ustawienia druku niedostępne. Plik .gcode nie może być modyfikowany."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:327
+msgctxt "@action:inmenu menubar:edit"
+msgid "Ungroup Models"
+msgstr "Rozgrupuj modele"
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingCategory.qml:234
-msgctxt "@label"
-msgid ""
-"Some hidden settings use values different from their normal calculated value.\n"
-"\n"
-"Click to make these settings visible."
-msgstr ""
-"Niektóre ukryte ustawienia używają wartości różniących się od ich normalnej, obliczonej wartości.\n"
-"\n"
-"Kliknij, aby te ustawienia były widoczne."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:337
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Merge Models"
+msgstr "Połącz modele"
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingView.qml:68
-msgctxt "@label:textbox"
-msgid "Search settings"
-msgstr "Ustawienia wyszukiwania"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:347
+msgctxt "@action:inmenu"
+msgid "&Multiply Model..."
+msgstr "&Powiel model..."
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingView.qml:463
-msgctxt "@action:menu"
-msgid "Copy value to all extruders"
-msgstr "Skopiuj wartość do wszystkich ekstruderów"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:354
+msgctxt "@action:inmenu menubar:edit"
+msgid "Select All Models"
+msgstr "Wybierz wszystkie modele"
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingView.qml:472
-msgctxt "@action:menu"
-msgid "Copy all changed values to all extruders"
-msgstr "Skopiuj wszystkie zmienione wartości do wszystkich ekstruderów"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:364
+msgctxt "@action:inmenu menubar:edit"
+msgid "Clear Build Plate"
+msgstr "Wyczyść stół"
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingView.qml:509
-msgctxt "@action:menu"
-msgid "Hide this setting"
-msgstr "Ukryj tę opcję"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:374
+msgctxt "@action:inmenu menubar:file"
+msgid "Reload All Models"
+msgstr "Przeładuj wszystkie modele"
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingView.qml:522
-msgctxt "@action:menu"
-msgid "Don't show this setting"
-msgstr "Nie pokazuj tej opcji"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:383
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models To All Build Plates"
+msgstr "Rozłóż Wszystkie Modele na Wszystkie Platformy Robocze"
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingView.qml:526
-msgctxt "@action:menu"
-msgid "Keep this setting visible"
-msgstr "Pozostaw tę opcję widoczną"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:390
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models"
+msgstr "Ułóż wszystkie modele"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:398
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange Selection"
+msgstr "Wybór ułożenia"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:405
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Positions"
+msgstr "Zresetuj wszystkie pozycje modelu"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:412
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Transformations"
+msgstr "Zresetuj wszystkie przekształcenia modelu"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:419
+msgctxt "@action:inmenu menubar:file"
+msgid "&Open File(s)..."
+msgstr "&Otwórz plik(i)..."
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:427
+msgctxt "@action:inmenu menubar:file"
+msgid "&New Project..."
+msgstr "&Nowy projekt..."
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:434
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Configuration Folder"
+msgstr "Pokaż folder konfiguracji"
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingView.qml:545
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:441
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:441
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:545
 msgctxt "@action:menu"
 msgid "Configure setting visibility..."
 msgstr "Skonfiguruj widoczność ustawień ..."
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:81
-msgctxt "@label"
-msgid "This setting is not used because all the settings that it influences are overridden."
-msgstr "To ustawienie nie jest używane, ponieważ wszystkie ustawienia, na które wpływa, są nadpisane."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:448
+msgctxt "@action:menu"
+msgid "&Marketplace"
+msgstr "&Marketplace"
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:86
-msgctxt "@label Header for list of settings."
-msgid "Affects"
-msgstr "Wpływać"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:242
+msgctxt "@label"
+msgid "This package will be installed after restarting."
+msgstr "Ten pakiet zostanie zainstalowany po ponownym uruchomieniu."
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:91
-msgctxt "@label Header for list of settings."
-msgid "Affected By"
-msgstr "Pod wpływem"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:435
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:15
+msgctxt "@title:tab"
+msgid "General"
+msgstr "Ogólny"
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:187
-msgctxt "@label"
-msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
-msgstr "To ustawienie jest dzielone pomiędzy wszystkimi ekstruderami. Zmiana tutaj spowoduje zmianę dla wszystkich ekstruderów."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:438
+msgctxt "@title:tab"
+msgid "Settings"
+msgstr "Ustawienia"
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:191
-msgctxt "@label"
-msgid "The value is resolved from per-extruder values "
-msgstr "Wartość jest pobierana z osobna dla każdego ekstrudera "
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:440
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:16
+msgctxt "@title:tab"
+msgid "Printers"
+msgstr "Drukarki"
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:230
-msgctxt "@label"
-msgid ""
-"This setting has a value that is different from the profile.\n"
-"\n"
-"Click to restore the value of the profile."
-msgstr ""
-"To ustawienie ma inną wartość niż w profilu.\n"
-"\n"
-"Kliknij, aby przywrócić wartość z profilu."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:444
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:34
+msgctxt "@title:tab"
+msgid "Profiles"
+msgstr "Profile"
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:329
-msgctxt "@label"
-msgid ""
-"This setting is normally calculated, but it currently has an absolute value set.\n"
-"\n"
-"Click to restore the calculated value."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:563
+msgctxt "@title:window %1 is the application name"
+msgid "Closing %1"
 msgstr ""
-"To ustawienie jest zwykle obliczane, ale obecnie ma wartość bezwzględną.\n"
-"\n"
-"Kliknij, aby przywrócić wartość obliczoną."
-
-#: /home/ruben/Projects/Cura/resources/qml/Account/GeneralOperations.qml:40
-msgctxt "@label"
-msgid "The next generation 3D printing workflow"
-msgstr "Nowa generacja systemu drukowania 3D"
 
-#: /home/ruben/Projects/Cura/resources/qml/Account/GeneralOperations.qml:51
-msgctxt "@text"
-msgid ""
-"- Send print jobs to Ultimaker printers outside your local network\n"
-"- Store your Ultimaker Cura settings in the cloud for use anywhere\n"
-"- Get exclusive access to print profiles from leading brands"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:564
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:576
+msgctxt "@label %1 is the application name"
+msgid "Are you sure you want to exit %1?"
 msgstr ""
-"- Wysyłaj zadania druku do drukarek Ultimaker poza siecią lokalną\n"
-"- Przechowuj ustawienia Ultimaker Cura w chmurze, aby używać w każdym miejscu\n"
-"- Uzyskaj wyłączny dostęp do profili materiałów wiodących marek"
 
-#: /home/ruben/Projects/Cura/resources/qml/Account/GeneralOperations.qml:78
-msgctxt "@button"
-msgid "Create account"
-msgstr "Utwórz konto"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:614
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
+msgctxt "@title:window"
+msgid "Open file(s)"
+msgstr "Otwórz plik(i)"
 
-#: /home/ruben/Projects/Cura/resources/qml/Account/UserOperations.qml:22
-msgctxt "@label The argument is a username."
-msgid "Hi %1"
-msgstr "Cześć %1"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:720
+msgctxt "@window:title"
+msgid "Install Package"
+msgstr "Instaluj pakiety"
 
-#: /home/ruben/Projects/Cura/resources/qml/Account/UserOperations.qml:33
-msgctxt "@button"
-msgid "Ultimaker account"
-msgstr "Konto Ultimaker"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:728
+msgctxt "@title:window"
+msgid "Open File(s)"
+msgstr "Otwórz plik(i)"
 
-#: /home/ruben/Projects/Cura/resources/qml/Account/UserOperations.qml:42
-msgctxt "@button"
-msgid "Sign out"
-msgstr "Wyloguj"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:731
+msgctxt "@text:window"
+msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
+msgstr "Znaleziono jeden lub więcej plików G-code w wybranych plikach. Możesz otwierać tylko jeden plik G-code jednocześnie. Jeśli chcesz otworzyć plik G-code, proszę wybierz tylko jeden."
 
-#: /home/ruben/Projects/Cura/resources/qml/Account/AccountWidget.qml:24
-msgctxt "@action:button"
-msgid "Sign in"
-msgstr "Zaloguj"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:834
+msgctxt "@title:window"
+msgid "Add Printer"
+msgstr "Dodaj drukarkę"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:15
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:842
 msgctxt "@title:window"
-msgid "About "
+msgid "What's New"
+msgstr "Co nowego"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:15
+msgctxt "@title:window The argument is the application name."
+msgid "About %1"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:57
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:57
 msgctxt "@label"
 msgid "version: %1"
 msgstr "version: %1"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:72
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:72
 msgctxt "@label"
 msgid "End-to-end solution for fused filament 3D printing."
 msgstr "Kompletne rozwiązanie do druku przestrzennego."
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:85
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:85
 msgctxt "@info:credit"
 msgid ""
 "Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
@@ -3131,132 +3389,157 @@ msgstr ""
 "Cura jest rozwijana przez firmę Ultimaker B.V. we współpracy ze społecznością.\n"
 "Cura z dumą korzysta z następujących projektów open source:"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:135
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:135
 msgctxt "@label"
 msgid "Graphical user interface"
 msgstr "Graficzny interfejs użytkownika"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:136
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:136
 msgctxt "@label"
 msgid "Application framework"
 msgstr "Struktura aplikacji"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:137
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:137
 msgctxt "@label"
 msgid "G-code generator"
 msgstr "Generator g-code"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:138
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:138
 msgctxt "@label"
 msgid "Interprocess communication library"
 msgstr "Biblioteka komunikacji międzyprocesowej"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:140
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:140
 msgctxt "@label"
 msgid "Programming language"
 msgstr "Język programowania"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:141
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:141
 msgctxt "@label"
 msgid "GUI framework"
 msgstr "Framework GUI"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:142
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:142
 msgctxt "@label"
 msgid "GUI framework bindings"
 msgstr "Powiązania Frameworka GUI"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:143
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:143
 msgctxt "@label"
 msgid "C/C++ Binding library"
 msgstr "Biblioteka Powiązań C/C++"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:144
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:144
 msgctxt "@label"
 msgid "Data interchange format"
 msgstr "Format wymiany danych"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:145
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:145
 msgctxt "@label"
 msgid "Support library for scientific computing"
 msgstr "Wsparcie biblioteki do obliczeń naukowych"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:146
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:146
 msgctxt "@label"
 msgid "Support library for faster math"
 msgstr "Wsparcie biblioteki dla szybszej matematyki"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:147
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:147
 msgctxt "@label"
 msgid "Support library for handling STL files"
 msgstr "Wsparcie biblioteki do obsługi plików STL"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:148
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:148
 msgctxt "@label"
 msgid "Support library for handling planar objects"
 msgstr "Biblioteka pomocnicza do obsługi obiektów płaskich"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:149
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:149
 msgctxt "@label"
 msgid "Support library for handling triangular meshes"
 msgstr "Biblioteka pomocnicza do obsługi siatek trójkątów"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:150
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:150
 msgctxt "@label"
 msgid "Support library for analysis of complex networks"
 msgstr "Biblioteka pomocnicza do analizy złożonych sieci"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:151
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:151
 msgctxt "@label"
 msgid "Support library for handling 3MF files"
 msgstr "Wsparcie biblioteki do obsługi plików 3MF"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:152
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:152
 msgctxt "@label"
 msgid "Support library for file metadata and streaming"
 msgstr "Biblioteka pomocy dla metadanych plików i przesyłania strumieniowego"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:153
 msgctxt "@label"
 msgid "Serial communication library"
 msgstr "Biblioteka komunikacji szeregowej"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:154
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:154
 msgctxt "@label"
 msgid "ZeroConf discovery library"
 msgstr "Bilbiotek poszukująca Zeroconf"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:155
 msgctxt "@label"
 msgid "Polygon clipping library"
 msgstr "Biblioteka edytująca pola"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:156
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:156
 msgctxt "@Label"
 msgid "Python HTTP library"
 msgstr "Biblioteka Python HTTP"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:158
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:158
 msgctxt "@label"
 msgid "Font"
 msgstr "Czcionka"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:159
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "SVG icons"
 msgstr "Ikony SVG"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Linux cross-distribution application deployment"
 msgstr "Wdrożenie aplikacji pomiędzy dystrybucjami Linux"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
+msgctxt "@title:window"
+msgid "Open project file"
+msgstr "Otwórz plik projektu"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:93
+msgctxt "@text:window"
+msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
+msgstr "Jest to plik projektu Cura. Czy chcesz otworzyć go jako projekt, czy zaimportować z niego modele?"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:103
+msgctxt "@text:window"
+msgid "Remember my choice"
+msgstr "Zapamiętaj mój wybór"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:122
+msgctxt "@action:button"
+msgid "Open as project"
+msgstr "Otwórz jako projekt"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:131
+msgctxt "@action:button"
+msgid "Import models"
+msgstr "Importuj modele"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
 msgctxt "@title:window"
 msgid "Discard or Keep changes"
 msgstr "Odrzuć lub zachowaj zmiany"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
 msgctxt "@text:window"
 msgid ""
 "You have customized some profile settings.\n"
@@ -3265,1795 +3548,1603 @@ msgstr ""
 "Dostosowałeś ustawienia profilu.\n"
 "Chcesz zachować, czy usunąć te ustawienia?"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:109
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:109
 msgctxt "@title:column"
 msgid "Profile settings"
 msgstr "Ustawienia profilu"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:116
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:116
 msgctxt "@title:column"
 msgid "Default"
 msgstr "Domyślne"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:123
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:123
 msgctxt "@title:column"
 msgid "Customized"
 msgstr "Dostosowane"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:157
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:156
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:708
+msgctxt "@option:discardOrKeep"
+msgid "Always ask me this"
+msgstr "Zawsze pytaj o to"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:157
 msgctxt "@option:discardOrKeep"
 msgid "Discard and never ask again"
 msgstr "Odrzuć i nigdy nie pytaj"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158
 msgctxt "@option:discardOrKeep"
 msgid "Keep and never ask again"
 msgstr "Zachowaj i nigdy nie pytaj"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:195
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:195
 msgctxt "@action:button"
 msgid "Discard"
 msgstr "Odrzuć"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:208
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:208
 msgctxt "@action:button"
 msgid "Keep"
 msgstr "Zachowaj"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:221
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:221
 msgctxt "@action:button"
 msgid "Create New Profile"
 msgstr "Utwórz nowy profil"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
 msgctxt "@text:window"
 msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
 msgstr "Znaleziono jeden lub więcej plików projektu w wybranych plikach. Możesz otwierać tylko jeden plik projektu na raz. Proponujemy importowanie tylko modeli z tych plików. Czy chcesz kontynuować?"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:99
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:99
 msgctxt "@action:button"
 msgid "Import all as models"
 msgstr "Importuj wszystkie jako modele"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
-msgctxt "@title:window"
-msgid "Open project file"
-msgstr "Otwórz plik projektu"
-
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:93
-msgctxt "@text:window"
-msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
-msgstr "Jest to plik projektu Cura. Czy chcesz otworzyć go jako projekt, czy zaimportować z niego modele?"
-
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:103
-msgctxt "@text:window"
-msgid "Remember my choice"
-msgstr "Zapamiętaj mój wybór"
-
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:122
-msgctxt "@action:button"
-msgid "Open as project"
-msgstr "Otwórz jako projekt"
-
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:131
-msgctxt "@action:button"
-msgid "Import models"
-msgstr "Importuj modele"
-
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
 msgctxt "@title:window"
 msgid "Save Project"
 msgstr "Zapisz projekt"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:73
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:70
-msgctxt "@action:title"
-msgid "Summary - Cura Project"
-msgstr "Podsumowanie - Projekt Cura"
-
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:97
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:92
-msgctxt "@action:label"
-msgid "Printer settings"
-msgstr "Ustawienia drukarki"
-
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:106
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:143
-msgctxt "@action:label"
-msgid "Type"
-msgstr "Typ"
-
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:121
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:159
-msgctxt "@action:label"
-msgid "Printer Group"
-msgstr "Grupa drukarek"
-
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:121
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:246
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:216
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:323
-msgctxt "@action:label"
-msgid "Name"
-msgstr "Nazwa"
-
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:177
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:177
 msgctxt "@action:label"
 msgid "Extruder %1"
 msgstr "Ekstruder %1"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:193
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:193
 msgctxt "@action:label"
 msgid "%1 & material"
 msgstr "%1 & materiał"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:195
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:195
 msgctxt "@action:label"
 msgid "Material"
 msgstr "Materiał"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:222
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:180
-msgctxt "@action:label"
-msgid "Profile settings"
-msgstr "Ustawienia profilu"
-
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:230
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:246
-msgctxt "@action:label"
-msgid "Not in profile"
-msgstr "Nie w profilu"
-
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:235
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:251
-msgctxt "@action:label"
-msgid "%1 override"
-msgid_plural "%1 overrides"
-msgstr[0] "%1 nadpisanie"
-msgstr[1] "%1 Zastępuje"
-
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:263
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:231
-msgctxt "@action:label"
-msgid "Intent"
-msgstr "Cel"
-
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:285
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:285
 msgctxt "@action:label"
 msgid "Don't show project summary on save again"
 msgstr "Nie pokazuj podsumowania projektu podczas ponownego zapisywania"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:304
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:304
 msgctxt "@action:button"
 msgid "Save"
 msgstr "Zapisz"
 
-#: /home/ruben/Projects/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
-msgctxt "@action:button"
-msgid "Marketplace"
-msgstr "Marketplace"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ExtruderButton.qml:16
+msgctxt "@label %1 is filled in with the name of an extruder"
+msgid "Print Selected Model with %1"
+msgid_plural "Print Selected Models with %1"
+msgstr[0] "Drukuj Wybrany Model z %1"
+msgstr[1] "Drukuj Wybrane Modele z %1"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/JobSpecs.qml:99
+msgctxt "@text Print job name"
+msgid "Untitled"
+msgstr "Bez tytułu"
 
-#: /home/ruben/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&File"
+msgstr "&Plik"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
 msgctxt "@title:menu menubar:toplevel"
 msgid "&Edit"
 msgstr "&Edytuj"
 
-#: /home/ruben/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:55
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:48
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:12
+msgctxt "@title:menu menubar:toplevel"
+msgid "&View"
+msgstr "&Widok"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:50
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Settings"
+msgstr "Opcje"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:55
 msgctxt "@title:menu menubar:toplevel"
 msgid "E&xtensions"
 msgstr "&Rozszerzenia"
 
-#: /home/ruben/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:89
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:93
 msgctxt "@title:menu menubar:toplevel"
 msgid "P&references"
 msgstr "Preferencje"
 
-#: /home/ruben/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:97
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:101
 msgctxt "@title:menu menubar:toplevel"
 msgid "&Help"
 msgstr "P&omoc"
 
-#: /home/ruben/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:124
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:147
 msgctxt "@title:window"
 msgid "New project"
 msgstr "Nowy projekt"
 
-#: /home/ruben/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:125
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148
 msgctxt "@info:question"
 msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
 msgstr "Czy na pewno chcesz rozpocząć nowy projekt? Spowoduje to wyczyszczenie stołu i niezapisanych ustawień."
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:82
-msgctxt "@action:inmenu"
-msgid "Show Online Troubleshooting Guide"
-msgstr "Pokaż przewodnik rozwiązywania problemów online"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
+msgctxt "@action:button"
+msgid "Marketplace"
+msgstr "Marketplace"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:89
-msgctxt "@action:inmenu"
-msgid "Toggle Full Screen"
-msgstr "Przełącz tryb pełnoekranowy"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
+msgctxt "@header"
+msgid "Configurations"
+msgstr "Konfiguracje"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:97
-msgctxt "@action:inmenu"
-msgid "Exit Full Screen"
-msgstr "Wyłącz tryb pełnoekranowy"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+msgctxt "@label"
+msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
+msgstr "Ta konfiguracja jest niedostępna, ponieważ %1 jest nierozpoznany. Przejdź do %2, aby pobrać prawidłowy profil materiału."
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:104
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Undo"
-msgstr "&Cofnij"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+msgctxt "@label"
+msgid "Marketplace"
+msgstr "Marketplace"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:114
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Redo"
-msgstr "&Ponów"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
+msgctxt "@label"
+msgid "Loading available configurations from the printer..."
+msgstr "Ładowanie dostępnych konfiguracji z drukarki..."
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:124
-msgctxt "@action:inmenu menubar:file"
-msgid "&Quit"
-msgstr "&Zamknij"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
+msgctxt "@label"
+msgid "The configurations are not available because the printer is disconnected."
+msgstr "Konfiguracje są niedostępne, ponieważ drukarka jest odłączona."
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:132
-msgctxt "@action:inmenu menubar:view"
-msgid "3D View"
-msgstr "Widok 3D"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
+msgctxt "@label"
+msgid "Select configuration"
+msgstr "Wybierz konfigurację"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:139
-msgctxt "@action:inmenu menubar:view"
-msgid "Front View"
-msgstr "Widok z przodu"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
+msgctxt "@label"
+msgid "Configurations"
+msgstr "Konfiguracje"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:146
-msgctxt "@action:inmenu menubar:view"
-msgid "Top View"
-msgstr "Widok z góry"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
+msgctxt "@header"
+msgid "Custom"
+msgstr "Niestandardowe"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:153
-msgctxt "@action:inmenu menubar:view"
-msgid "Left Side View"
-msgstr "Widok z lewej strony"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+msgctxt "@label"
+msgid "Printer"
+msgstr "Drukarka"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:160
-msgctxt "@action:inmenu menubar:view"
-msgid "Right Side View"
-msgstr "Widok z prawej strony"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+msgctxt "@label"
+msgid "Enabled"
+msgstr "Włączona"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:167
-msgctxt "@action:inmenu"
-msgid "Configure Cura..."
-msgstr "Konfiguruj Cura..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:251
+msgctxt "@label"
+msgid "Material"
+msgstr "Materiał"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:174
-msgctxt "@action:inmenu menubar:printer"
-msgid "&Add Printer..."
-msgstr "&Dodaj drukarkę..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:378
+msgctxt "@label"
+msgid "Use glue for better adhesion with this material combination."
+msgstr "Użyj kleju dla lepszej przyczepności dla tej kombinacji materiałów."
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:180
-msgctxt "@action:inmenu menubar:printer"
-msgid "Manage Pr&inters..."
-msgstr "Zarządzaj drukarkami..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:27
+msgctxt "@label"
+msgid "Print Selected Model With:"
+msgid_plural "Print Selected Models With:"
+msgstr[0] "Wydrukuj wybrany model z:"
+msgstr[1] "Wydrukuj wybrane modele z:"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:187
-msgctxt "@action:inmenu"
-msgid "Manage Materials..."
-msgstr "Zarządzaj materiałami..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:116
+msgctxt "@title:window"
+msgid "Multiply Selected Model"
+msgid_plural "Multiply Selected Models"
+msgstr[0] "Zduplikuj wybrany model"
+msgstr[1] "Zduplikuj wybrane modele"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:195
-msgctxt "@action:inmenu"
-msgid "Add more materials from Marketplace"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:141
+msgctxt "@label"
+msgid "Number of Copies"
+msgstr "Liczba kopii"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:202
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Update profile with current settings/overrides"
-msgstr "&Aktualizuj profil z bieżącymi ustawieniami"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:33
+msgctxt "@title:menu menubar:file"
+msgid "&Save..."
+msgstr "&Zapisz..."
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:210
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Discard current changes"
-msgstr "&Odrzuć bieżące zmiany"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:54
+msgctxt "@title:menu menubar:file"
+msgid "&Export..."
+msgstr "&Eksportuj..."
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:222
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Create profile from current settings/overrides..."
-msgstr "&Utwórz profil z bieżących ustawień..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:65
+msgctxt "@action:inmenu menubar:file"
+msgid "Export Selection..."
+msgstr "Eksportuj Zaznaczenie..."
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:228
-msgctxt "@action:inmenu menubar:profile"
-msgid "Manage Profiles..."
-msgstr "Zarządzaj profilami..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:13
+msgctxt "@label:category menu label"
+msgid "Material"
+msgstr "Materiał"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:236
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Online &Documentation"
-msgstr "Pokaż dokumentację internetową"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:54
+msgctxt "@label:category menu label"
+msgid "Favorites"
+msgstr "Ulubione"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:244
-msgctxt "@action:inmenu menubar:help"
-msgid "Report a &Bug"
-msgstr "Zgłoś błąd"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:79
+msgctxt "@label:category menu label"
+msgid "Generic"
+msgstr "Podstawowe"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:252
-msgctxt "@action:inmenu menubar:help"
-msgid "What's New"
-msgstr "Co nowego"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:25
+msgctxt "@label:category menu label"
+msgid "Network enabled printers"
+msgstr "Drukarki dostępne w sieci"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:258
-msgctxt "@action:inmenu menubar:help"
-msgid "About..."
-msgstr "O..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:42
+msgctxt "@label:category menu label"
+msgid "Local printers"
+msgstr "Drukarki lokalne"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:265
-msgctxt "@action:inmenu menubar:edit"
-msgid "Delete Selected Model"
-msgid_plural "Delete Selected Models"
-msgstr[0] "Usuń wybrany model"
-msgstr[1] "Usuń wybrane modele"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open &Recent"
+msgstr "Otwórz &ostatnio używane"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:275
-msgctxt "@action:inmenu menubar:edit"
-msgid "Center Selected Model"
-msgid_plural "Center Selected Models"
-msgstr[0] "Wyśrodkuj wybrany model"
-msgstr[1] "Wyśrodkuj wybrane modele"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:15
+msgctxt "@title:menu menubar:settings"
+msgid "&Printer"
+msgstr "&Drukarka"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:284
-msgctxt "@action:inmenu menubar:edit"
-msgid "Multiply Selected Model"
-msgid_plural "Multiply Selected Models"
-msgstr[0] "Rozmnóż wybrany model"
-msgstr[1] "Rozmnóż wybrane modele"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:27
+msgctxt "@title:menu"
+msgid "&Material"
+msgstr "&Materiał"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:293
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:36
 msgctxt "@action:inmenu"
-msgid "Delete Model"
-msgstr "Usuń model"
+msgid "Set as Active Extruder"
+msgstr "Ustaw jako aktywną głowicę"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:301
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:42
 msgctxt "@action:inmenu"
-msgid "Ce&nter Model on Platform"
-msgstr "Wyśrodkuj model na platformie"
+msgid "Enable Extruder"
+msgstr "Włącz Ekstruder"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:307
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Group Models"
-msgstr "&Grupuj modele"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:49
+msgctxt "@action:inmenu"
+msgid "Disable Extruder"
+msgstr "Wyłącz Ekstruder"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:327
-msgctxt "@action:inmenu menubar:edit"
-msgid "Ungroup Models"
-msgstr "Rozgrupuj modele"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
+msgctxt "@action:inmenu"
+msgid "Visible Settings"
+msgstr "Widoczne Ustawienia"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:337
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Merge Models"
-msgstr "Połącz modele"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
+msgctxt "@action:inmenu"
+msgid "Collapse All Categories"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:347
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
 msgctxt "@action:inmenu"
-msgid "&Multiply Model..."
-msgstr "&Powiel model..."
+msgid "Manage Setting Visibility..."
+msgstr "Ustaw Widoczność Ustawień..."
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:354
-msgctxt "@action:inmenu menubar:edit"
-msgid "Select All Models"
-msgstr "Wybierz wszystkie modele"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:19
+msgctxt "@action:inmenu menubar:view"
+msgid "&Camera position"
+msgstr "&Pozycja kamery"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:364
-msgctxt "@action:inmenu menubar:edit"
-msgid "Clear Build Plate"
-msgstr "Wyczyść stół"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:44
+msgctxt "@action:inmenu menubar:view"
+msgid "Camera view"
+msgstr "Widok z kamery"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:374
-msgctxt "@action:inmenu menubar:file"
-msgid "Reload All Models"
-msgstr "Przeładuj wszystkie modele"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:47
+msgctxt "@action:inmenu menubar:view"
+msgid "Perspective"
+msgstr "Perspektywiczny"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:383
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models To All Build Plates"
-msgstr "Rozłóż Wszystkie Modele na Wszystkie Platformy Robocze"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:59
+msgctxt "@action:inmenu menubar:view"
+msgid "Orthographic"
+msgstr "Rzut ortograficzny"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:390
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models"
-msgstr "Ułóż wszystkie modele"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:80
+msgctxt "@action:inmenu menubar:view"
+msgid "&Build plate"
+msgstr "P&ole robocze"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:398
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange Selection"
-msgstr "Wybór ułożenia"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:119
+msgctxt "@label:MonitorStatus"
+msgid "Not connected to a printer"
+msgstr "Nie podłączono do drukarki"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:405
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Positions"
-msgstr "Zresetuj wszystkie pozycje modelu"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:123
+msgctxt "@label:MonitorStatus"
+msgid "Printer does not accept commands"
+msgstr "Drukarka nie akceptuje poleceń"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:412
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Transformations"
-msgstr "Zresetuj wszystkie przekształcenia modelu"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:133
+msgctxt "@label:MonitorStatus"
+msgid "In maintenance. Please check the printer"
+msgstr "W naprawie. Sprawdź drukarkę"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:419
-msgctxt "@action:inmenu menubar:file"
-msgid "&Open File(s)..."
-msgstr "&Otwórz plik(i)..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:144
+msgctxt "@label:MonitorStatus"
+msgid "Lost connection with the printer"
+msgstr "Utracone połączenie z drukarką"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:427
-msgctxt "@action:inmenu menubar:file"
-msgid "&New Project..."
-msgstr "&Nowy projekt..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:146
+msgctxt "@label:MonitorStatus"
+msgid "Printing..."
+msgstr "Drukowanie..."
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:434
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Configuration Folder"
-msgstr "Pokaż folder konfiguracji"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:149
+msgctxt "@label:MonitorStatus"
+msgid "Paused"
+msgstr "Wstrzymano"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:448
-msgctxt "@action:menu"
-msgid "&Marketplace"
-msgstr "&Marketplace"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:152
+msgctxt "@label:MonitorStatus"
+msgid "Preparing..."
+msgstr "Przygotowywanie ..."
 
-#: /home/ruben/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
-msgctxt "@title:window"
-msgid "More information on anonymous data collection"
-msgstr "Wiećej informacji o zbieraniu anonimowych danych"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:154
+msgctxt "@label:MonitorStatus"
+msgid "Please remove the print"
+msgstr "Usuń wydruk"
 
-#: /home/ruben/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
-msgctxt "@text:window"
-msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
-msgstr "Ultimaker Cura zbiera anonimowe dane w celu poprawy jakości druku i komfortu użytkowania. Poniżej znajduje się przykład wszystkich udostępnianych danych:"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:325
+msgctxt "@label"
+msgid "Abort Print"
+msgstr "Anuluj Wydruk"
 
-#: /home/ruben/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
-msgctxt "@text:window"
-msgid "I don't want to send anonymous data"
-msgstr "Nie chcę wysyłać anonimowych danych"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:337
+msgctxt "@label"
+msgid "Are you sure you want to abort the print?"
+msgstr "Czy na pewno chcesz przerwać drukowanie?"
 
-#: /home/ruben/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
-msgctxt "@text:window"
-msgid "Allow sending anonymous data"
-msgstr "Pozwól na wysyłanie anonimowych danych"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectSelector.qml:59
+msgctxt "@label"
+msgid "Object list"
+msgstr "Lista obiektów"
 
-#: /home/ruben/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:227
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
-msgctxt "@action:button"
-msgid "OK"
-msgstr "OK"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:132
+msgctxt "@label"
+msgid "Interface"
+msgstr "Interfejs"
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:19
-msgctxt "@title:window"
-msgid "Convert Image..."
-msgstr "Konwertuj obraz ..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:211
+msgctxt "@label"
+msgid "Currency:"
+msgstr "Waluta:"
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:33
-msgctxt "@info:tooltip"
-msgid "The maximum distance of each pixel from \"Base.\""
-msgstr "Maksymalna odległość każdego piksela od \"Bazy.\""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:224
+msgctxt "@label"
+msgid "Theme:"
+msgstr "Motyw:"
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:38
-msgctxt "@action:label"
-msgid "Height (mm)"
-msgstr "Wysokość (mm)"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:280
+msgctxt "@label"
+msgid "You will need to restart the application for these changes to have effect."
+msgstr "Musisz zrestartować aplikację, aby te zmiany zaczęły obowiązywać."
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:56
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:297
 msgctxt "@info:tooltip"
-msgid "The base height from the build plate in millimeters."
-msgstr "Wysokość podstawy od stołu w milimetrach."
-
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:61
-msgctxt "@action:label"
-msgid "Base (mm)"
-msgstr "Baza (mm)"
+msgid "Slice automatically when changing settings."
+msgstr "Tnij automatycznie podczas zmiany ustawień."
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:79
-msgctxt "@info:tooltip"
-msgid "The width in millimeters on the build plate."
-msgstr "Szerokość w milimetrach na stole."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:305
+msgctxt "@option:check"
+msgid "Slice automatically"
+msgstr "Automatyczne Cięcie"
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:84
-msgctxt "@action:label"
-msgid "Width (mm)"
-msgstr "Szerokość (mm)"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:319
+msgctxt "@label"
+msgid "Viewport behavior"
+msgstr "Zachowanie okna edycji"
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:103
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:327
 msgctxt "@info:tooltip"
-msgid "The depth in millimeters on the build plate"
-msgstr "Głębokość w milimetrach na stole"
+msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly."
+msgstr "Zaznacz nieobsługiwane obszary modelu na czerwono. Bez wsparcia te obszary nie będą drukowane prawidłowo."
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:108
-msgctxt "@action:label"
-msgid "Depth (mm)"
-msgstr "Głębokość (mm)"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:336
+msgctxt "@option:check"
+msgid "Display overhang"
+msgstr "Wyświetl zwis"
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:126
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:344
 msgctxt "@info:tooltip"
-msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
-msgstr "Dla litofanów ciemne piksele powinny odpowiadać grubszym miejscom, aby zablokować więcej światła. Dla zaznaczenia wysokości map, jaśniejsze piksele oznaczają wyższy teren, więc jaśniejsze piksele powinny odpowiadać wyższym położeniom w wygenerowanym modelu 3D."
-
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Darker is higher"
-msgstr "Ciemniejsze jest wyższe"
+msgid "Moves the camera so the model is in the center of the view when a model is selected"
+msgstr "Przenosi kamerę, aby model był w centrum widoku, gdy wybrano model"
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Lighter is higher"
-msgstr "Jaśniejszy jest wyższy"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:349
+msgctxt "@action:button"
+msgid "Center camera when item is selected"
+msgstr "Wyśrodkuj kamerę kiedy przedmiot jest zaznaczony"
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:149
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:359
 msgctxt "@info:tooltip"
-msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
-msgstr ""
+msgid "Should the default zoom behavior of cura be inverted?"
+msgstr "Czy domyślne zachowanie zoomu powinno zostać odwrócone?"
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
-msgctxt "@item:inlistbox"
-msgid "Linear"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:364
+msgctxt "@action:button"
+msgid "Invert the direction of camera zoom."
+msgstr "Odwróć kierunek zoomu kamery."
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:172
-msgctxt "@item:inlistbox"
-msgid "Translucency"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:380
+msgctxt "@info:tooltip"
+msgid "Should zooming move in the direction of the mouse?"
+msgstr "Czy przybliżanie powinno poruszać się w kierunku myszy?"
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:171
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:380
 msgctxt "@info:tooltip"
-msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
-msgstr ""
+msgid "Zooming towards the mouse is not supported in the orthographic perspective."
+msgstr "Powiększanie w kierunku myszy nie jest obsługiwane w danej perspektywie."
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:177
-msgctxt "@action:label"
-msgid "1mm Transmittance (%)"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:385
+msgctxt "@action:button"
+msgid "Zoom toward mouse direction"
+msgstr "Przybliżaj w kierunku myszy"
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:195
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:411
 msgctxt "@info:tooltip"
-msgid "The amount of smoothing to apply to the image."
-msgstr "Ilość wygładzania do zastosowania do obrazu."
-
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:200
-msgctxt "@action:label"
-msgid "Smoothing"
-msgstr "Wygładzanie"
+msgid "Should models on the platform be moved so that they no longer intersect?"
+msgstr "Czy modele na platformie powinny być przenoszone w taki sposób, aby nie przecinały się?"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
-msgctxt "@title:tab"
-msgid "Printer"
-msgstr "Drukarka"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:416
+msgctxt "@option:check"
+msgid "Ensure models are kept apart"
+msgstr "Upewnij się, że modele są oddzielone"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
-msgctxt "@title:label"
-msgid "Nozzle Settings"
-msgstr "Ustawienia dyszy"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:425
+msgctxt "@info:tooltip"
+msgid "Should models on the platform be moved down to touch the build plate?"
+msgstr "Czy modele na platformie powinny być przesunięte w dół, aby dotknęły stołu roboczego?"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
-msgctxt "@label"
-msgid "Nozzle size"
-msgstr "Rozmiar dyszy"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:430
+msgctxt "@option:check"
+msgid "Automatically drop models to the build plate"
+msgstr "Automatycznie upuść modele na stół roboczy"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:88
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:102
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:203
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:223
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:243
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:285
-msgctxt "@label"
-msgid "mm"
-msgstr "mm"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:442
+msgctxt "@info:tooltip"
+msgid "Show caution message in g-code reader."
+msgstr "Pokaż wiadomości ostrzegawcze w czytniku g-code."
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
-msgctxt "@label"
-msgid "Compatible material diameter"
-msgstr "Kompatybilna średnica materiału"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:451
+msgctxt "@option:check"
+msgid "Caution message in g-code reader"
+msgstr "Wiadomość ostrzegawcza w czytniku g-code"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
-msgctxt "@label"
-msgid "Nozzle offset X"
-msgstr "Korekcja dyszy X"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:459
+msgctxt "@info:tooltip"
+msgid "Should layer be forced into compatibility mode?"
+msgstr "Czy warstwa powinna być wymuszona w trybie zgodności?"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
-msgctxt "@label"
-msgid "Nozzle offset Y"
-msgstr "Korekcja dyszy Y"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:464
+msgctxt "@option:check"
+msgid "Force layer view compatibility mode (restart required)"
+msgstr "Wymuszenie widoku warstw w trybie zgodności (wymaga ponownego uruchomienia)"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
-msgctxt "@label"
-msgid "Cooling Fan Number"
-msgstr "Numer Wentylatora"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:474
+msgctxt "@info:tooltip"
+msgid "Should Cura open at the location it was closed?"
+msgstr "Czy Cura powinna się otwierać w miejscu, w którym została zamknięta?"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:162
-msgctxt "@title:label"
-msgid "Extruder Start G-code"
-msgstr "Początkowy G-code ekstrudera"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:479
+msgctxt "@option:check"
+msgid "Restore window position on start"
+msgstr "Przywróć pozycję okna przy starcie"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:176
-msgctxt "@title:label"
-msgid "Extruder End G-code"
-msgstr "Końcowy G-code ekstrudera"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:489
+msgctxt "@info:tooltip"
+msgid "What type of camera rendering should be used?"
+msgstr "Jakiego rodzaju kamery należy użyć do renderowania?"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
-msgctxt "@title:label"
-msgid "Printer Settings"
-msgstr "Ustawienia drukarki"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:496
+msgctxt "@window:text"
+msgid "Camera rendering:"
+msgstr "Renderowanie z kamery: "
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
-msgctxt "@label"
-msgid "X (Width)"
-msgstr "X (Szerokość)"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:507
+msgid "Perspective"
+msgstr "Perspektywiczny"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:84
-msgctxt "@label"
-msgid "Y (Depth)"
-msgstr "Y (Głębokość)"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:508
+msgid "Orthographic"
+msgstr "Rzut ortograficzny"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:98
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:539
 msgctxt "@label"
-msgid "Z (Height)"
-msgstr "Z (Wysokość)"
+msgid "Opening and saving files"
+msgstr "Otwieranie i zapisywanie plików"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:112
-msgctxt "@label"
-msgid "Build plate shape"
-msgstr "Kształt stołu roboczego"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:546
+msgctxt "@info:tooltip"
+msgid "Should models be scaled to the build volume if they are too large?"
+msgstr "Czy modele powinny być skalowane do wielkości obszaru roboczego, jeśli są zbyt duże?"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:125
-msgctxt "@label"
-msgid "Origin at center"
-msgstr "Początek na środku"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:551
+msgctxt "@option:check"
+msgid "Scale large models"
+msgstr "Skaluj duże modele"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:137
-msgctxt "@label"
-msgid "Heated bed"
-msgstr "Podgrzewany stół"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:561
+msgctxt "@info:tooltip"
+msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?"
+msgstr "Model może wydawać się bardzo mały, jeśli jego jednostka jest na przykład w metrach, a nie w milimetrach. Czy takie modele powinny być skalowane?"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:149
-msgctxt "@label"
-msgid "Heated build volume"
-msgstr "Grzany obszar roboczy"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:566
+msgctxt "@option:check"
+msgid "Scale extremely small models"
+msgstr "Skaluj bardzo małe modele"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:161
-msgctxt "@label"
-msgid "G-code flavor"
-msgstr "Wersja G-code"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:576
+msgctxt "@info:tooltip"
+msgid "Should models be selected after they are loaded?"
+msgstr "Czy modele powinny zostać zaznaczone po załadowaniu?"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:185
-msgctxt "@title:label"
-msgid "Printhead Settings"
-msgstr "Ustawienia głowicy"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:581
+msgctxt "@option:check"
+msgid "Select models when loaded"
+msgstr "Zaznaczaj modele po załadowaniu"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:199
-msgctxt "@label"
-msgid "X min"
-msgstr "X min"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:591
+msgctxt "@info:tooltip"
+msgid "Should a prefix based on the printer name be added to the print job name automatically?"
+msgstr "Czy przedrostek oparty na nazwie drukarki powinien być automatycznie dodawany do nazwy zadania?"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:219
-msgctxt "@label"
-msgid "Y min"
-msgstr "Y min"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:596
+msgctxt "@option:check"
+msgid "Add machine prefix to job name"
+msgstr "Dodaj przedrostek maszyny do nazwy zadania"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:239
-msgctxt "@label"
-msgid "X max"
-msgstr "X max"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:606
+msgctxt "@info:tooltip"
+msgid "Should a summary be shown when saving a project file?"
+msgstr "Czy podsumowanie powinno być wyświetlane podczas zapisu projektu?"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
-msgctxt "@label"
-msgid "Y max"
-msgstr "Y max"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:610
+msgctxt "@option:check"
+msgid "Show summary dialog when saving project"
+msgstr "Pokaż okno podsumowania podczas zapisywaniu projektu"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:281
-msgctxt "@label"
-msgid "Gantry Height"
-msgstr "Wysokość wózka"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:620
+msgctxt "@info:tooltip"
+msgid "Default behavior when opening a project file"
+msgstr "Domyślne zachowanie podczas otwierania pliku projektu"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:295
-msgctxt "@label"
-msgid "Number of Extruders"
-msgstr "Liczba ekstruderów"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:628
+msgctxt "@window:text"
+msgid "Default behavior when opening a project file: "
+msgstr "Domyślne zachowanie podczas otwierania pliku projektu: "
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:341
-msgctxt "@label"
-msgid "Shared Heater"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:642
+msgctxt "@option:openProject"
+msgid "Always ask me this"
+msgstr "Zawsze pytaj"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:367
-msgctxt "@title:label"
-msgid "Start G-code"
-msgstr "Początkowy G-code"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:643
+msgctxt "@option:openProject"
+msgid "Always open as a project"
+msgstr "Zawsze otwieraj jako projekt"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:378
-msgctxt "@title:label"
-msgid "End G-code"
-msgstr "Końcowy G-code"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:644
+msgctxt "@option:openProject"
+msgid "Always import models"
+msgstr "Zawsze importuj modele"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
-msgctxt "@title"
-msgid "Marketplace"
-msgstr "Marketplace"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:680
+msgctxt "@info:tooltip"
+msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
+msgstr "Kiedy dokonasz zmian w profilu i przełączysz się na inny, zostanie wyświetlone okno z pytaniem, czy chcesz zachować twoje zmiany, czy nie. Możesz też wybrać domyślne zachowanie, żeby to okno już nigdy nie było pokazywane."
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:689
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
 msgctxt "@label"
-msgid "Compatibility"
-msgstr "Zgodność"
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
-msgctxt "@label:table_header"
-msgid "Machine"
-msgstr "Drukarka"
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
-msgctxt "@label:table_header"
-msgid "Build Plate"
-msgstr "Stół roboczy"
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
-msgctxt "@label:table_header"
-msgid "Support"
-msgstr "Podpory"
+msgid "Profiles"
+msgstr "Profile"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
-msgctxt "@label:table_header"
-msgid "Quality"
-msgstr "Jakość"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:694
+msgctxt "@window:text"
+msgid "Default behavior for changed setting values when switching to a different profile: "
+msgstr "Domyślne zachowanie dla zmienionych ustawień podczas zmiany profilu na inny: "
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
-msgctxt "@action:label"
-msgid "Technical Data Sheet"
-msgstr "Dane Techniczne"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:709
+msgctxt "@option:discardOrKeep"
+msgid "Always discard changed settings"
+msgstr "Zawsze odrzucaj wprowadzone zmiany"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
-msgctxt "@action:label"
-msgid "Safety Data Sheet"
-msgstr "Dane Bezpieczeństwa"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:710
+msgctxt "@option:discardOrKeep"
+msgid "Always transfer changed settings to new profile"
+msgstr "Zawsze przenoś wprowadzone zmiany do nowego profilu"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
-msgctxt "@action:label"
-msgid "Printing Guidelines"
-msgstr "Wskazówki Drukowania"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:744
+msgctxt "@label"
+msgid "Privacy"
+msgstr "Prywatność"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
-msgctxt "@action:label"
-msgid "Website"
-msgstr "Strona Internetowa"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:751
+msgctxt "@info:tooltip"
+msgid "Should Cura check for updates when the program is started?"
+msgstr "Czy Cura ma sprawdzać dostępność aktualizacji podczas uruchamiania programu?"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/SmallRatingWidget.qml:27
-msgctxt "@label"
-msgid "ratings"
-msgstr "oceny"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:756
+msgctxt "@option:check"
+msgid "Check for updates on start"
+msgstr "Sprawdź, dostępność aktualizacji podczas uruchamiania"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
-msgctxt "@label"
-msgid "Will install upon restarting"
-msgstr "Zostanie zainstalowane po ponownym uruchomieniu"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:766
+msgctxt "@info:tooltip"
+msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored."
+msgstr "Czy anonimowe dane na temat wydruku mają być wysyłane do Ultimaker? Uwaga. Żadne modele, adresy IP, ani żadne inne dane osobiste nie będą wysyłane i/lub przechowywane."
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
-msgctxt "@action:button"
-msgid "Update"
-msgstr "Aktualizuj"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:771
+msgctxt "@option:check"
+msgid "Send (anonymous) print information"
+msgstr "Wyślij (anonimowe) informacje o drukowaniu"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:780
 msgctxt "@action:button"
-msgid "Updating"
-msgstr "Aktualizowanie"
+msgid "More information"
+msgstr "Więcej informacji"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:40
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:84
 msgctxt "@action:button"
-msgid "Updated"
-msgstr "Zaktualizowano"
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to update"
-msgstr "<a href='%1'>Zaloguj</a> aby aktualizować"
+msgid "Activate"
+msgstr "Aktywuj"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:63
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:152
 msgctxt "@action:button"
-msgid "Downgrade"
-msgstr "Zainstaluj poprzednią wersję"
+msgid "Rename"
+msgstr "Zmień nazwę"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
 msgctxt "@action:button"
-msgid "Uninstall"
-msgstr "Odinstaluj"
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
-msgctxt "@info"
-msgid "You will need to restart Cura before changes in packages have effect."
-msgstr "Należy uruchomić ponownie Cura, aby zmiany w pakietach przyniosły efekt."
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:45
-msgctxt "@info:button"
-msgid "Quit Cura"
-msgstr "Zakończ Cura"
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/RatingWidget.qml:54
-msgctxt "@label"
-msgid "You need to login first before you can rate"
-msgstr "Musisz być zalogowany aby ocenić"
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/RatingWidget.qml:54
-msgctxt "@label"
-msgid "You need to install the package before you can rate"
-msgstr "Musisz zainstalować pakiety zanim będziesz mógł ocenić"
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
-msgctxt "@label"
-msgid "Featured"
-msgstr "Polecane"
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
-msgctxt "@info:tooltip"
-msgid "Go to Web Marketplace"
-msgstr ""
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
-msgctxt "@label"
-msgid "Search materials"
-msgstr ""
+msgid "Create"
+msgstr "Stwórz"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
 msgctxt "@action:button"
-msgid "Installed"
-msgstr "Zainstalowane"
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to install or update"
-msgstr "<a href=‚%1’>Zaloguj</a> aby zainstalować lub aktualizować"
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Buy material spools</a>"
-msgstr "<a href=‚%1’>Kup materiał na szpulach</a>"
+msgid "Duplicate"
+msgstr "Duplikuj"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:167
 msgctxt "@action:button"
-msgid "Back"
-msgstr "Powrót"
+msgid "Import"
+msgstr "Importuj"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:179
 msgctxt "@action:button"
-msgid "Install"
-msgstr "Instaluj"
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:34
-msgctxt "@title:tab"
-msgid "Plugins"
-msgstr "Wtyczki"
+msgid "Export"
+msgstr "Eksportuj"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
-msgctxt "@title:tab"
-msgid "Installed"
-msgstr "Zainstalowano"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
+msgctxt "@action:label"
+msgid "Printer"
+msgstr "Drukarka"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
-msgctxt "@title"
-msgid "Changes from your account"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:274
+msgctxt "@title:window"
+msgid "Confirm Remove"
+msgstr "Potwierdź Usunięcie"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-msgctxt "@button"
-msgid "Dismiss"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:275
+msgctxt "@label (%1 is object name)"
+msgid "Are you sure you wish to remove %1? This cannot be undone!"
+msgstr "Czy na pewno chcesz usunąć %1? Nie można tego cofnąć!"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
-msgctxt "@label"
-msgid "The following packages will be added:"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
+msgctxt "@title:window"
+msgid "Import Material"
+msgstr "Importuj Materiał"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:95
-msgctxt "@label"
-msgid "The following packages can not be installed because of an incompatible Cura version:"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
+msgstr "Nie można zaimportować materiału <filename>%1</filename>: <message>%2</message>"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
-msgctxt "@label"
-msgid "You need to accept the license to install the package"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully imported material <filename>%1</filename>"
+msgstr "Udało się zaimportować materiał <filename>%1</filename>"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
 msgctxt "@title:window"
-msgid "Confirm uninstall"
-msgstr "Potwierdź deinstalację"
+msgid "Export Material"
+msgstr "Eksportuj Materiał"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
-msgctxt "@text:window"
-msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
-msgstr "Odinstalowujesz materiały i/lub profile, które są aktualnie używane. Zatwierdzenie spowoduje przywrócenie bieżących ustawień materiału/profilu do ustawień domyślnych."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
+msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
+msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
+msgstr "Nie udało się wyeksportować materiału do <filename>%1</filename>: <message>%2</message>"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
-msgctxt "@text:window"
-msgid "Materials"
-msgstr "Materiały"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully exported material to <filename>%1</filename>"
+msgstr "Udało się wyeksportować materiał do <filename>%1</filename>"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
-msgctxt "@text:window"
-msgid "Profiles"
-msgstr "Profile"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
+msgctxt "@title"
+msgid "Information"
+msgstr "Informacja"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
-msgctxt "@action:button"
-msgid "Confirm"
-msgstr "Potwierdź"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
+msgctxt "@title:window"
+msgid "Confirm Diameter Change"
+msgstr "Potwierdź Zmianę Średnicy"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:93
-msgctxt "@label"
-msgid "Your rating"
-msgstr "Twoja ocena"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
+msgctxt "@label (%1 is a number)"
+msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
+msgstr "Średnica nowego filamentu została ustawiona na %1mm, i nie jest kompatybilna z bieżącym ekstruderem. Czy chcesz kontynuować?"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:101
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
 msgctxt "@label"
-msgid "Version"
-msgstr "Wersja"
+msgid "Display Name"
+msgstr "Wyświetlana nazwa"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:108
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
 msgctxt "@label"
-msgid "Last updated"
-msgstr "Ostatnia aktualizacja"
+msgid "Brand"
+msgstr "Marka"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:115
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
 msgctxt "@label"
-msgid "Author"
-msgstr "Autor"
+msgid "Material Type"
+msgstr "Typ Materiału"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:122
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
 msgctxt "@label"
-msgid "Downloads"
-msgstr "Pobrań"
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:31
-msgctxt "@description"
-msgid "Get plugins and materials verified by Ultimaker"
-msgstr ""
+msgid "Color"
+msgstr "Kolor"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
 msgctxt "@label"
-msgid "Community Contributions"
-msgstr "Udział Społeczności"
+msgid "Properties"
+msgstr "Właściwości"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
 msgctxt "@label"
-msgid "Community Plugins"
-msgstr "Wtyczki Społeczności"
+msgid "Density"
+msgstr "Gęstość"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
 msgctxt "@label"
-msgid "Generic Materials"
-msgstr "Materiały Podstawowe"
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
-msgctxt "@info"
-msgid "Could not connect to the Cura Package database. Please check your connection."
-msgstr "Nie można połączyć się z bazą danych pakietów Cura. Sprawdź swoje połączenie z internetem."
+msgid "Diameter"
+msgstr "Średnica"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:93
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
 msgctxt "@label"
-msgid "Website"
-msgstr "Strona internetowa"
+msgid "Filament Cost"
+msgstr "Koszt Filamentu"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:100
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
 msgctxt "@label"
-msgid "Email"
-msgstr "E-mail"
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:16
-msgctxt "@info"
-msgid "Fetching packages..."
-msgstr "Uzyskiwanie pakietów..."
-
-#: /home/ruben/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
-msgctxt "@title"
-msgid "Build Plate Leveling"
-msgstr "Poziomowanie stołu"
+msgid "Filament weight"
+msgstr "Waga filamentu"
 
-#: /home/ruben/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
 msgctxt "@label"
-msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
-msgstr "Aby upewnić się, że wydruki będą wychodziły świetne, możesz teraz wyregulować stół. Po kliknięciu przycisku \"Przejdź do następnego położenia\" dysza będzie się poruszać do różnych pozycji, które można wyregulować."
+msgid "Filament length"
+msgstr "Długość Filamentu"
 
-#: /home/ruben/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
 msgctxt "@label"
-msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
-msgstr "Dla każdej pozycji; Włóż kartkę papieru pod dyszę i wyreguluj wysokość stołu roboczego. Wysokość stołu jest prawidłowa, gdy papier stawia lekki opór."
-
-#: /home/ruben/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
-msgctxt "@action:button"
-msgid "Start Build Plate Leveling"
-msgstr "Rozpocznij poziomowanie stołu roboczego"
-
-#: /home/ruben/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
-msgctxt "@action:button"
-msgid "Move to Next Position"
-msgstr "Przejdź do następnego położenia"
+msgid "Cost per Meter"
+msgstr "Koszt na metr"
 
-#: /home/ruben/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
 msgctxt "@label"
-msgid "Please select any upgrades made to this Ultimaker Original"
-msgstr "Proszę wybrać ulepszenia wykonane w tym Ultimaker Original"
+msgid "This material is linked to %1 and shares some of its properties."
+msgstr "Ten materiał jest powiązany z %1 i dzieli się niekórymi swoimi właściwościami."
 
-#: /home/ruben/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
 msgctxt "@label"
-msgid "Heated Build Plate (official kit or self-built)"
-msgstr "Płyta grzewcza (zestaw oficjalny lub własnej roboty)"
-
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
-msgctxt "@title:window"
-msgid "Connect to Networked Printer"
-msgstr "Połącz się z drukarką sieciową"
+msgid "Unlink Material"
+msgstr "Odłącz materiał"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
 msgctxt "@label"
-msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
-msgstr "Aby drukować bezpośrednio na drukarce przez sieć, upewnij się, że drukarka jest podłączona do sieci za pomocą kabla sieciowego lub do sieci WIFI. Jeśli nie podłączysz Cury do drukarki, możesz nadal używać napędu USB do przesyłania plików G-Code do drukarki."
+msgid "Description"
+msgstr "Opis"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
 msgctxt "@label"
-msgid "Select your printer from the list below:"
-msgstr "Wybierz swoją drukarkę z poniższej listy:"
-
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
-msgctxt "@action:button"
-msgid "Edit"
-msgstr "Edycja"
-
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
-msgctxt "@action:button"
-msgid "Refresh"
-msgstr "Odśwież"
+msgid "Adhesion Information"
+msgstr "Informacje dotyczące przyczepności"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
 msgctxt "@label"
-msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
-msgstr "Jeżeli twojej drukarki nie ma na liście, przeczytaj <a href='%1'>poradnik o problemach z drukowaniem przez sieć</a>"
+msgid "Print settings"
+msgstr "Ustawienia druku"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:104
 msgctxt "@label"
-msgid "This printer is not set up to host a group of printers."
-msgstr "Ta drukarka nie jest skonfigurowana jako host dla grupy drukarek."
+msgid "Create"
+msgstr "Stwórz"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:121
 msgctxt "@label"
-msgid "This printer is the host for a group of %1 printers."
-msgstr "Ta drukarka jest hostem grupy %1 drukarek."
+msgid "Duplicate"
+msgstr "Duplikuj"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
-msgctxt "@label"
-msgid "The printer at this address has not yet responded."
-msgstr "Drukarka pod tym adresem jeszcze nie odpowiedziała."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:202
+msgctxt "@title:window"
+msgid "Create Profile"
+msgstr "Stwórz profil"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
-msgctxt "@action:button"
-msgid "Connect"
-msgstr "Połącz"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:204
+msgctxt "@info"
+msgid "Please provide a name for this profile."
+msgstr "Podaj nazwę tego profilu."
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:260
 msgctxt "@title:window"
-msgid "Invalid IP address"
-msgstr "Nieprawidłowy adres IP"
+msgid "Duplicate Profile"
+msgstr "Duplikuj profil"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:291
 msgctxt "@title:window"
-msgid "Printer Address"
-msgstr "Adres drukarki"
-
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:132
-msgctxt "@label"
-msgid "Unavailable printer"
-msgstr "Drukarka niedostępna"
-
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:134
-msgctxt "@label"
-msgid "First available"
-msgstr "Pierwsza dostępna"
-
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:183
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:192
-msgctxt "@label"
-msgid "Glass"
-msgstr "Szkło"
-
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:248
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:256
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:514
-msgctxt "@info"
-msgid "Please update your printer's firmware to manage the queue remotely."
-msgstr "Zaktualizuj oprogramowanie drukarki, aby zdalnie zarządzać kolejką."
+msgid "Rename Profile"
+msgstr "Zmień nazwę profilu"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:304
 msgctxt "@title:window"
-msgid "Configuration Changes"
-msgstr "Zmiany konfiguracji"
+msgid "Import Profile"
+msgstr "Importuj Profil"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
-msgctxt "@action:button"
-msgid "Override"
-msgstr "Nadpisz"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:333
+msgctxt "@title:window"
+msgid "Export Profile"
+msgstr "Eksportuj Profil"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
-msgctxt "@label"
-msgid "The assigned printer, %1, requires the following configuration change:"
-msgid_plural "The assigned printer, %1, requires the following configuration changes:"
-msgstr[0] "Przypisana drukarka, %1, wymaga następującej zmiany konfiguracji:"
-msgstr[1] "Przypisana drukarka, %1, wymaga następujących zmian konfiguracji:"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:396
+msgctxt "@label %1 is printer name"
+msgid "Printer: %1"
+msgstr "Drukarka: %1"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
-msgctxt "@label"
-msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
-msgstr "Drukarka %1 jest przypisana, ale zadanie zawiera nieznaną konfigurację materiału."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:554
+msgctxt "@action:button"
+msgid "Update profile with current settings/overrides"
+msgstr "Aktualizuj profil z bieżącymi ustawieniami"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
-msgctxt "@label"
-msgid "Change material %1 from %2 to %3."
-msgstr "Zmień materiał %1 z %2 na %3."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:561
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:258
+msgctxt "@action:button"
+msgid "Discard current changes"
+msgstr "Odrzuć bieżące zmiany"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
-msgctxt "@label"
-msgid "Load %3 as material %1 (This cannot be overridden)."
-msgstr "Załaduj %3 jako materiał %1 (Nie można nadpisać)."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:580
+msgctxt "@action:label"
+msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
+msgstr "Ten profil używa ustawień domyślnych określonych przez drukarkę, dlatego nie ma żadnych ustawień z poniższej liście."
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
-msgctxt "@label"
-msgid "Change print core %1 from %2 to %3."
-msgstr "Zmień rdzeń drukujący %1 z %2 na %3."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:588
+msgctxt "@action:label"
+msgid "Your current settings match the selected profile."
+msgstr "Aktualne ustawienia odpowiadają wybranemu profilowi."
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
-msgctxt "@label"
-msgid "Change build plate to %1 (This cannot be overridden)."
-msgstr "Zmień stół na %1 (Nie można nadpisać)."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:606
+msgctxt "@title:tab"
+msgid "Global Settings"
+msgstr "Ustawienia ogólne"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
-msgctxt "@label"
-msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
-msgstr "Nadpisanie spowoduje użycie określonych ustawień w istniejącej konfiguracji drukarki. Może to spowodować niepowodzenie druku."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:61
+msgctxt "@info:status"
+msgid "Calculated"
+msgstr "Przeliczone"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
-msgctxt "@label"
-msgid "Aluminum"
-msgstr "Aluminum"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:75
+msgctxt "@title:column"
+msgid "Setting"
+msgstr "Ustawienie"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
-msgctxt "@label:status"
-msgid "Aborted"
-msgstr "Anulowano"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:82
+msgctxt "@title:column"
+msgid "Profile"
+msgstr "Profil"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
-msgctxt "@label:status"
-msgid "Finished"
-msgstr "Zakończono"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:89
+msgctxt "@title:column"
+msgid "Current"
+msgstr "Aktualny"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
-msgctxt "@label:status"
-msgid "Preparing..."
-msgstr "Przygotowyję..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:97
+msgctxt "@title:column"
+msgid "Unit"
+msgstr "Jednostka"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
-msgctxt "@label:status"
-msgid "Aborting..."
-msgstr "Przerywanie..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
+msgctxt "@title:tab"
+msgid "Setting Visibility"
+msgstr "Widoczność ustawienia"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
-msgctxt "@label:status"
-msgid "Pausing..."
-msgstr "Zatrzymywanie..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
+msgctxt "@label:textbox"
+msgid "Check all"
+msgstr "Zaznacz wszystko"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
-msgctxt "@label:status"
-msgid "Paused"
-msgstr "Wstrzymana"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
+msgctxt "@label"
+msgid "Extruder"
+msgstr "Ekstruder"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
-msgctxt "@label:status"
-msgid "Resuming..."
-msgstr "Przywracanie..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
+msgctxt "@tooltip"
+msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
+msgstr "Docelowa temperatura głowicy. Głowica będzie się rozgrzewać lub chłodzić do tej temperatury. Jeżeli jest równe 0, grzanie głowicy będzie wyłączone."
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
-msgctxt "@label:status"
-msgid "Action required"
-msgstr "Konieczne są działania"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
+msgctxt "@tooltip"
+msgid "The current temperature of this hotend."
+msgstr "Aktualna temperatura tej głowicy."
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
-msgctxt "@label:status"
-msgid "Finishes %1 at %2"
-msgstr "Zakończone %1 z %2"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
+msgctxt "@tooltip of temperature input"
+msgid "The temperature to pre-heat the hotend to."
+msgstr "Temperatura do wstępnego podgrzewania głowicy."
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:155
-msgctxt "@label link to Connect and Cloud interfaces"
-msgid "Manage printer"
-msgstr "Zarządzaj drukarkami"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
+msgctxt "@button Cancel pre-heating"
+msgid "Cancel"
+msgstr "Anuluj"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:289
-msgctxt "@info"
-msgid "The webcam is not available because you are monitoring a cloud printer."
-msgstr "Kamera nie jest dostępna, ponieważ nadzorujesz drukarkę w chmurze."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
+msgctxt "@button"
+msgid "Pre-heat"
+msgstr "Podgrzewanie wstępne"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
-msgctxt "@label:status"
-msgid "Loading..."
-msgstr "Wczytywanie..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
+msgctxt "@tooltip of pre-heat"
+msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
+msgstr "Podgrzej głowicę przed drukowaniem. Możesz w dalszym ciągu dostosowywać drukowanie podczas podgrzewania i nie będziesz musiał czekać na podgrzanie głowicy kiedy będziesz gotowy."
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
-msgctxt "@label:status"
-msgid "Unavailable"
-msgstr "Niedostępne"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
+msgctxt "@tooltip"
+msgid "The colour of the material in this extruder."
+msgstr "Kolor materiału w tym ekstruderze."
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
-msgctxt "@label:status"
-msgid "Unreachable"
-msgstr "Nieosiągalna"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
+msgctxt "@tooltip"
+msgid "The material in this extruder."
+msgstr "Materiał w głowicy drukującej."
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
-msgctxt "@label:status"
-msgid "Idle"
-msgstr "Zajęta"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
+msgctxt "@tooltip"
+msgid "The nozzle inserted in this extruder."
+msgstr "Dysza włożona do tego ekstrudera."
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:401
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
 msgctxt "@label"
-msgid "Untitled"
-msgstr "Bez tytułu"
+msgid "Build plate"
+msgstr "Stół roboczy"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:422
-msgctxt "@label"
-msgid "Anonymous"
-msgstr "Anonimowa"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
+msgctxt "@tooltip"
+msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
+msgstr "Temperatura docelowa podgrzewanego stołu. Stół rozgrzeje się lub schłodzi w kierunku tej temperatury. Jeśli ustawione jest 0, grzanie stołu jest wyłączone."
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:449
-msgctxt "@label:status"
-msgid "Requires configuration changes"
-msgstr "Wymaga zmian konfiguracji"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
+msgctxt "@tooltip"
+msgid "The current temperature of the heated bed."
+msgstr "Bieżąca temperatura podgrzewanego stołu."
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:487
-msgctxt "@action:button"
-msgid "Details"
-msgstr "Szczegóły"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
+msgctxt "@tooltip of temperature input"
+msgid "The temperature to pre-heat the bed to."
+msgstr "Temperatura do wstępnego podgrzewania stołu."
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
-msgctxt "@label"
-msgid "Move to top"
-msgstr "Przesuń na początek"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
+msgctxt "@tooltip of pre-heat"
+msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
+msgstr "Przed drukowaniem podgrzej stół. W dalszym ciągu można dostosowywać druk podczas nagrzewania, a nie będziesz musiał czekać na rozgrzanie stołu, gdy będziesz gotowy do drukowania."
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
 msgctxt "@label"
-msgid "Delete"
-msgstr "Usuń"
+msgid "Printer control"
+msgstr "Kontrola drukarką"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
 msgctxt "@label"
-msgid "Pausing..."
-msgstr "Zatrzymywanie..."
+msgid "Jog Position"
+msgstr "Pozycja Swobodnego Ruchu"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
 msgctxt "@label"
-msgid "Resuming..."
-msgstr "Przywracanie..."
+msgid "X/Y"
+msgstr "X/Y"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
 msgctxt "@label"
-msgid "Aborting..."
-msgstr "Przerywanie..."
+msgid "Z"
+msgstr "Z"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
 msgctxt "@label"
-msgid "Abort"
-msgstr "Anuluj"
-
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
-msgctxt "@label %1 is the name of a print job."
-msgid "Are you sure you want to move %1 to the top of the queue?"
-msgstr "Czy jesteś pewien, że chcesz przesunąć %1 na początek kolejki?"
-
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
-msgctxt "@window:title"
-msgid "Move print job to top"
-msgstr "Przesuń zadanie drukowania na początek"
+msgid "Jog Distance"
+msgstr "Dystans Swobodnego Ruchu"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
-msgctxt "@label %1 is the name of a print job."
-msgid "Are you sure you want to delete %1?"
-msgstr "Czy jesteś pewien, że chcesz usunąć %1?"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
+msgctxt "@label"
+msgid "Send G-code"
+msgstr "Wyślij G-code"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
-msgctxt "@window:title"
-msgid "Delete print job"
-msgstr "Usuń zadanie drukowania"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
+msgctxt "@tooltip of G-code command input"
+msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
+msgstr "Wyślij niestandardową komendę G-code do podłączonej drukarki. Naciśnij 'enter', aby wysłać komendę."
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
-msgctxt "@label %1 is the name of a print job."
-msgid "Are you sure you want to abort %1?"
-msgstr "Czy jesteś pewien, że chcesz anulować %1?"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
+msgctxt "@info:status"
+msgid "The printer is not connected."
+msgstr "Drukarka nie jest podłączona."
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
-msgctxt "@title:window"
-msgid "Print over network"
-msgstr "Drukuj przez sieć"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:166
+msgctxt "@button"
+msgid "Add printer"
+msgstr "Dodaj drukarkę"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
-msgctxt "@action:button"
-msgid "Print"
-msgstr "Drukuj"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:182
+msgctxt "@button"
+msgid "Manage printers"
+msgstr "Zarządzaj drukarkami"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
 msgctxt "@label"
-msgid "Printer selection"
-msgstr "Wybór drukarki"
+msgid "Connected printers"
+msgstr "Podłączone drukarki"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
 msgctxt "@label"
-msgid "Queued"
-msgstr "W kolejce"
+msgid "Preset printers"
+msgstr "Zdefiniowane drukarki"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:67
-msgctxt "@label link to connect manager"
-msgid "Manage in browser"
-msgstr "Zarządzaj w przeglądarce"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:140
+msgctxt "@label"
+msgid "Active print"
+msgstr "Aktywny wydruk"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:100
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:148
 msgctxt "@label"
-msgid "There are no print jobs in the queue. Slice and send a job to add one."
-msgstr "W kolejce nie ma zadań drukowania. Potnij i wyślij zadanie, aby dodać."
+msgid "Job Name"
+msgstr "Nazwa pracy"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:115
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:156
 msgctxt "@label"
-msgid "Print jobs"
-msgstr "Zadania druku"
+msgid "Printing Time"
+msgstr "Czas druku"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:131
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:164
 msgctxt "@label"
-msgid "Total print time"
-msgstr "Łączny czas druku"
+msgid "Estimated time left"
+msgstr "Szacowany czas pozostały"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:147
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
 msgctxt "@label"
-msgid "Waiting for"
-msgstr "Oczekiwanie na"
+msgid "Profile"
+msgstr "Profil"
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:14
-msgctxt "@title:window"
-msgid "Open Project"
-msgstr "Otwórz projekt"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:172
+msgctxt "@tooltip"
+msgid ""
+"Some setting/override values are different from the values stored in the profile.\n"
+"\n"
+"Click to open the profile manager."
+msgstr ""
+"Niektóre wartości ustawień różnią się od wartości zapisanych w profilu.\n"
+"\n"
+"Kliknij, aby otworzyć menedżer profili."
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:58
-msgctxt "@action:ComboBox Update/override existing profile"
-msgid "Update existing"
-msgstr "Zaktualizuj istniejące"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:160
+msgctxt "@label:header"
+msgid "Custom profiles"
+msgstr "Profile niestandardowe"
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:59
-msgctxt "@action:ComboBox Save settings in a new profile"
-msgid "Create new"
-msgstr "Utwórz nowy"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
+msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
+msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
+msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
+msgstr[0] "Nie ma profilu %1 dla konfiguracji w ekstruderze %2. Zamiast tego zostaną użyte domyślne cale"
+msgstr[1] "Nie ma profilu %1 dla konfiguracji w ekstruderach %2. Zamiast tego zostaną użyte domyślne cale"
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:108
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the machine be resolved?"
-msgstr "Jak powinny być rozwiązywane błędy w maszynie?"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
+msgctxt "@label shown when we load a Gcode file"
+msgid "Print setup disabled. G-code file can not be modified."
+msgstr "Ustawienia druku niedostępne. Plik .gcode nie może być modyfikowany."
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:115
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:124
-msgctxt "@action:ComboBox option"
-msgid "Update"
-msgstr "Aktualizacja"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+msgctxt "@button"
+msgid "Recommended"
+msgstr "Polecane"
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:116
-msgctxt "@action:ComboBox option"
-msgid "Create new"
-msgstr "Utwórz nowy"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+msgctxt "@button"
+msgid "Custom"
+msgstr "Niestandardowe"
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:196
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the profile be resolved?"
-msgstr "Jak powinien zostać rozwiązany problem z profilem?"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
+msgctxt "@label:Should be short"
+msgid "On"
+msgstr "Wł"
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:262
-msgctxt "@action:label"
-msgid "Derivative from"
-msgstr "Pochodna z"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
+msgctxt "@label:Should be short"
+msgid "Off"
+msgstr "Wył"
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:267
-msgctxt "@action:label"
-msgid "%1, %2 override"
-msgid_plural "%1, %2 overrides"
-msgstr[0] "%1, %2 nadpisanie"
-msgstr[1] "%1, %2 zastępuje"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
+msgctxt "@label"
+msgid "Experimental"
+msgstr "Eksperymentalne"
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:283
-msgctxt "@action:label"
-msgid "Material settings"
-msgstr "Ustawienia materiału"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
+msgctxt "@label"
+msgid "Adhesion"
+msgstr "Przyczepność"
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:299
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the material be resolved?"
-msgstr "Jak powinien zostać rozwiązany problem z materiałem?"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
+msgctxt "@label"
+msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
+msgstr "Włącz drukowanie obrysu lub tratwy. Spowoduje to dodanie płaskiej powierzchni wokół lub pod Twoim obiektem, która jest łatwa do usunięcia po wydruku."
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:342
-msgctxt "@action:label"
-msgid "Setting visibility"
-msgstr "Ustawienie widoczności"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
+msgctxt "@label"
+msgid "Gradual infill"
+msgstr "Stopniowe wypełnienie"
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:351
-msgctxt "@action:label"
-msgid "Mode"
-msgstr "Tryb"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
+msgctxt "@label"
+msgid "Gradual infill will gradually increase the amount of infill towards the top."
+msgstr "Stopniowe wypełnienie stopniowo zwiększa ilość wypełnień w górę."
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:367
-msgctxt "@action:label"
-msgid "Visible settings:"
-msgstr "Widoczne ustawienie:"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
+msgctxt "@tooltip"
+msgid "You have modified some profile settings. If you want to change these go to custom mode."
+msgstr "Zmodyfikowałeś ustawienia profilu. Jeżeli chcesz je zmienić, przejdź do trybu niestandardowego."
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:372
-msgctxt "@action:label"
-msgid "%1 out of %2"
-msgstr "%1 poza %2"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+msgctxt "@label"
+msgid "Support"
+msgstr "Podpory"
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:398
-msgctxt "@action:warning"
-msgid "Loading a project will clear all models on the build plate."
-msgstr "Ładowanie projektu usunie wszystkie modele z platformy roboczej."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
+msgctxt "@label"
+msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
+msgstr "Generuje podpory wspierające części modelu, które mają zwis. Bez tych podpór takie części mogłyby spaść podczas drukowania."
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:416
-msgctxt "@action:button"
-msgid "Open"
-msgstr "Otwórz"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingCategory.qml:234
+msgctxt "@label"
+msgid ""
+"Some hidden settings use values different from their normal calculated value.\n"
+"\n"
+"Click to make these settings visible."
+msgstr ""
+"Niektóre ukryte ustawienia używają wartości różniących się od ich normalnej, obliczonej wartości.\n"
+"\n"
+"Kliknij, aby te ustawienia były widoczne."
 
-#: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:45
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:81
 msgctxt "@label"
-msgid "Mesh Type"
-msgstr "Typ siatki"
+msgid "This setting is not used because all the settings that it influences are overridden."
+msgstr "To ustawienie nie jest używane, ponieważ wszystkie ustawienia, na które wpływa, są nadpisane."
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:86
+msgctxt "@label Header for list of settings."
+msgid "Affects"
+msgstr "Wpływać"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:91
+msgctxt "@label Header for list of settings."
+msgid "Affected By"
+msgstr "Pod wpływem"
 
-#: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:87
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:187
 msgctxt "@label"
-msgid "Normal model"
-msgstr "Normalny model"
+msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
+msgstr "To ustawienie jest dzielone pomiędzy wszystkimi ekstruderami. Zmiana tutaj spowoduje zmianę dla wszystkich ekstruderów."
 
-#: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:99
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:191
 msgctxt "@label"
-msgid "Print as support"
-msgstr "Drukuj jako podpora"
+msgid "This setting is resolved from conflicting extruder-specific values:"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:111
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:230
 msgctxt "@label"
-msgid "Modify settings for overlaps"
-msgstr "Modyfikuj ustawienia nakładania"
+msgid ""
+"This setting has a value that is different from the profile.\n"
+"\n"
+"Click to restore the value of the profile."
+msgstr ""
+"To ustawienie ma inną wartość niż w profilu.\n"
+"\n"
+"Kliknij, aby przywrócić wartość z profilu."
 
-#: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:123
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:329
 msgctxt "@label"
-msgid "Don't support overlaps"
-msgstr "Nie wspieraj nałożenia"
+msgid ""
+"This setting is normally calculated, but it currently has an absolute value set.\n"
+"\n"
+"Click to restore the calculated value."
+msgstr ""
+"To ustawienie jest zwykle obliczane, ale obecnie ma wartość bezwzględną.\n"
+"\n"
+"Kliknij, aby przywrócić wartość obliczoną."
 
-#: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:147
-msgctxt "@action:checkbox"
-msgid "Infill only"
-msgstr "Tylko wypełnienie"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:68
+msgctxt "@label:textbox"
+msgid "Search settings"
+msgstr "Ustawienia wyszukiwania"
 
-#: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:368
-msgctxt "@action:button"
-msgid "Select settings"
-msgstr "Wybierz ustawienia"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:463
+msgctxt "@action:menu"
+msgid "Copy value to all extruders"
+msgstr "Skopiuj wartość do wszystkich ekstruderów"
 
-#: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
-msgctxt "@title:window"
-msgid "Select Settings to Customize for this model"
-msgstr "Wybierz Ustawienia, aby dostosować ten model"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:472
+msgctxt "@action:menu"
+msgid "Copy all changed values to all extruders"
+msgstr "Skopiuj wszystkie zmienione wartości do wszystkich ekstruderów"
 
-#: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:70
-msgctxt "@label:checkbox"
-msgid "Show all"
-msgstr "Pokaż wszystko"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:509
+msgctxt "@action:menu"
+msgid "Hide this setting"
+msgstr "Ukryj tę opcję"
 
-#: /home/ruben/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
-msgctxt "@title:window"
-msgid "Post Processing Plugin"
-msgstr "Plugin post-processingu"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:522
+msgctxt "@action:menu"
+msgid "Don't show this setting"
+msgstr "Nie pokazuj tej opcji"
 
-#: /home/ruben/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
-msgctxt "@label"
-msgid "Post Processing Scripts"
-msgstr "Skrypty post-processingu"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:526
+msgctxt "@action:menu"
+msgid "Keep this setting visible"
+msgstr "Pozostaw tę opcję widoczną"
 
-#: /home/ruben/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
-msgctxt "@action"
-msgid "Add a script"
-msgstr "Dodaj skrypt"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:27
+msgctxt "@info:tooltip"
+msgid "3D View"
+msgstr "Widok 3D"
 
-#: /home/ruben/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
-msgctxt "@label"
-msgid "Settings"
-msgstr "Ustawienia"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:40
+msgctxt "@info:tooltip"
+msgid "Front View"
+msgstr "Widok z przodu"
 
-#: /home/ruben/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:493
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:53
 msgctxt "@info:tooltip"
-msgid "Change active post-processing scripts"
-msgstr "Zmień aktywne skrypty post-processingu"
+msgid "Top View"
+msgstr "Widok z góry"
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
-msgctxt "@title"
-msgid "Update Firmware"
-msgstr "Aktualizacja Oprogramowania Sprzętowego"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:66
+msgctxt "@info:tooltip"
+msgid "Left View"
+msgstr "Widok z lewej strony"
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
-msgctxt "@label"
-msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
-msgstr "Oprogramowanie ukłądowe jest częścią oprogramowania działającego bezpośrednio na drukarce 3D. Oprogramowanie to steruje silnikami krokowymi, reguluje temperaturę i ostatecznie sprawia, że drukarka działa."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:79
+msgctxt "@info:tooltip"
+msgid "Right View"
+msgstr "Widok z prawej strony"
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewsSelector.qml:50
 msgctxt "@label"
-msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
-msgstr "Oprogramowanie ukłądowe dostarczane z nowymi drukarkami działa, ale nowe wersje mają zazwyczaj więcej funkcji i ulepszeń."
+msgid "View type"
+msgstr "Typ widoku"
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
-msgctxt "@action:button"
-msgid "Automatically upgrade Firmware"
-msgstr "Automatycznie uaktualnij oprogramowanie"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:212
+msgctxt "@label"
+msgid "Printer name"
+msgstr "Nazwa drukarki"
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
-msgctxt "@action:button"
-msgid "Upload custom Firmware"
-msgstr "Prześlij niestandardowe oprogramowanie"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:225
+msgctxt "@text"
+msgid "Please give your printer a name"
+msgstr "Podaj nazwę drukarki"
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
 msgctxt "@label"
-msgid "Firmware can not be updated because there is no connection with the printer."
-msgstr "Oprogramowanie sprzętowe nie może być zaktualizowane, ponieważ nie ma połączenia z drukarką."
+msgid "Add a printer"
+msgstr "Dodaj drukarkę"
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
 msgctxt "@label"
-msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
-msgstr "Oprogramowanie sprzętowe nie może być zaktualizowane, ponieważ połączenie z drukarką nie wspiera usługi."
-
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
-msgctxt "@title:window"
-msgid "Select custom firmware"
-msgstr "Wybierz niestandardowe oprogramowanie"
+msgid "Add a networked printer"
+msgstr "Dodaj drukarkę sieciową"
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
-msgctxt "@title:window"
-msgid "Firmware Update"
-msgstr "Aktualizacja oprogramowania układowego"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:81
+msgctxt "@label"
+msgid "Add a non-networked printer"
+msgstr "Dodaj drukarkę niesieciową"
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:42
 msgctxt "@label"
-msgid "Updating firmware."
-msgstr "Aktualizowanie oprogramowania."
+msgid "There is no printer found over your network."
+msgstr "Nie znaleziono drukarki w Twojej sieci."
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:180
 msgctxt "@label"
-msgid "Firmware update completed."
-msgstr "Aktualizacja oprogramowania zakończona."
+msgid "Refresh"
+msgstr "Odśwież"
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:191
 msgctxt "@label"
-msgid "Firmware update failed due to an unknown error."
-msgstr "Aktualizacja oprogramowania nie powiodła się z powodu nieznanego błędu."
+msgid "Add printer by IP"
+msgstr "Dodaj drukarkę przez IP"
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:224
 msgctxt "@label"
-msgid "Firmware update failed due to an communication error."
-msgstr "Aktualizacja oprogramowania nie powiodła się z powodu błędu komunikacji."
+msgid "Troubleshooting"
+msgstr "Rozwiązywanie problemów"
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
 msgctxt "@label"
-msgid "Firmware update failed due to an input/output error."
-msgstr "Aktualizacja oprogramowania nie powiodła się z powodu błędu wejścia / wyjścia."
+msgid "Add printer by IP address"
+msgstr "Dodaj drukarkę przez IP"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
+msgctxt "@text"
+msgid "Place enter your printer's IP address."
+msgstr "Wprowadź adres IP drukarki."
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+msgctxt "@button"
+msgid "Add"
+msgstr "Dodaj"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
 msgctxt "@label"
-msgid "Firmware update failed due to missing firmware."
-msgstr "Aktualizacja oprogramowania nie powiodła się z powodu utraconego oprogramowania."
+msgid "Could not connect to device."
+msgstr "Nie można połączyć się z urządzeniem."
 
-#: /home/ruben/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:100
-msgctxt "@info"
-msgid ""
-"Please make sure your printer has a connection:\n"
-"- Check if the printer is turned on.\n"
-"- Check if the printer is connected to the network.\n"
-"- Check if you are signed in to discover cloud-connected printers."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
+msgctxt "@label"
+msgid "Can't connect to your Ultimaker printer?"
 msgstr ""
-"Upewnij się, że drukarka ma połączenie:\n"
-"- Sprawdź, czy drukarka jest włączona.\n"
-"- Sprawdź, czy drukarka jest podłączona do sieci.\n"
-"- Sprawdź, czy jesteś zalogowany, aby znaleźć drukarki podłączone do chmury."
 
-#: /home/ruben/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:117
-msgctxt "@info"
-msgid "Please connect your printer to the network."
-msgstr "Podłącz drukarkę do sieci."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
+msgctxt "@label"
+msgid "The printer at this address has not responded yet."
+msgstr "Drukarka pod tym adresem jeszcze nie odpowiedziała."
 
-#: /home/ruben/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:156
-msgctxt "@label link to technical assistance"
-msgid "View user manuals online"
-msgstr "Pokaż instrukcję użytkownika online"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
+msgctxt "@label"
+msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
+msgstr "Ta drukarka nie może zostać dodana, ponieważ jest nieznana lub nie jest hostem grupy."
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
 msgctxt "@button"
-msgid "Want more?"
-msgstr "Chcesz więcej?"
+msgid "Back"
+msgstr "Wstecz"
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
 msgctxt "@button"
-msgid "Backup Now"
-msgstr "Utwórz kopię zapasową"
-
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
-msgctxt "@checkbox:description"
-msgid "Auto Backup"
-msgstr "Automatyczne tworzenie kopii zapasowej"
+msgid "Connect"
+msgstr "Połącz"
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
-msgctxt "@checkbox:description"
-msgid "Automatically create a backup each day that Cura is started."
-msgstr "Automatycznie twórz kopie zapasowe każdego dnia, w którym uruchomiono Curę."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:36
+msgctxt "@label"
+msgid "Ultimaker Account"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
-msgctxt "@backuplist:label"
-msgid "Cura Version"
-msgstr "Wersja Cura"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:77
+msgctxt "@text"
+msgid "Your key to connected 3D printing"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
-msgctxt "@backuplist:label"
-msgid "Machines"
-msgstr "Drukarki"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:94
+msgctxt "@text"
+msgid "- Customize your experience with more print profiles and plugins"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
-msgctxt "@backuplist:label"
-msgid "Materials"
-msgstr "Materiały"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:97
+msgctxt "@text"
+msgid "- Stay flexible by syncing your setup and loading it anywhere"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
-msgctxt "@backuplist:label"
-msgid "Profiles"
-msgstr "Profile"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:100
+msgctxt "@text"
+msgid "- Increase efficiency with a remote workflow on Ultimaker printers"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
-msgctxt "@backuplist:label"
-msgid "Plugins"
-msgstr "Pluginy"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:119
+msgctxt "@button"
+msgid "Finish"
+msgstr "Koniec"
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:128
 msgctxt "@button"
-msgid "Restore"
-msgstr "Przywróć"
+msgid "Create an account"
+msgstr "Stwórz konto"
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
-msgctxt "@dialog:title"
-msgid "Delete Backup"
-msgstr "Usuń kopię zapasową"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+msgctxt "@label"
+msgid "Help us to improve Ultimaker Cura"
+msgstr "Pomóż nam ulepszyć Ultimaker Cura"
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
-msgctxt "@dialog:info"
-msgid "Are you sure you want to delete this backup? This cannot be undone."
-msgstr "Czy na pewno chcesz usunąć tę kopię zapasową? Tej czynności nie można cofnąć."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
+msgctxt "@text"
+msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
+msgstr "Ultimaker Cura zbiera anonimowe dane w celu poprawy jakości druku i komfortu użytkownika, w tym:"
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
-msgctxt "@dialog:title"
-msgid "Restore Backup"
-msgstr "Przywróć kopię zapasową"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
+msgctxt "@text"
+msgid "Machine types"
+msgstr "Typy maszyn"
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
-msgctxt "@dialog:info"
-msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
-msgstr "Musisz zrestartować Curę przed przywróceniem kopii zapasowej. Czy chcesz teraz zamknąć Curę?"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
+msgctxt "@text"
+msgid "Material usage"
+msgstr "Zużycie materiału"
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/main.qml:25
-msgctxt "@title:window"
-msgid "Cura Backups"
-msgstr "Kopie zapasowe cura"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
+msgctxt "@text"
+msgid "Number of slices"
+msgstr "Ilość warstw"
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
-msgctxt "@title"
-msgid "My Backups"
-msgstr "Moje Kopie Zapasowe"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
+msgctxt "@text"
+msgid "Print settings"
+msgstr "Ustawienia druku"
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
-msgctxt "@empty_state"
-msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
-msgstr "Nie masz żadnych kopii zapasowych. Użyj przycisku „Utwórz kopię zapasową”, aby go utworzyć."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
+msgctxt "@text"
+msgid "Data collected by Ultimaker Cura will not contain any personal information."
+msgstr "Dane zebrane przez Ultimaker Cura nie będą zawierać żadnych prywatnych danych osobowych."
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
-msgctxt "@backup_limit_info"
-msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
-msgstr "Podczas fazy podglądu będziesz ograniczony do 5 widocznych kopii zapasowych. Usuń kopię zapasową, aby zobaczyć starsze."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
+msgctxt "@text"
+msgid "More information"
+msgstr "Więcej informacji"
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
-msgctxt "@description"
-msgid "Backup and synchronize your Cura settings."
-msgstr "Wykonaj kopię zapasową i zsynchronizuj ustawienia Cura."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+msgctxt "@label"
+msgid "Empty"
+msgstr "Pusty"
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
 msgctxt "@label"
-msgid "Color scheme"
-msgstr "Schemat kolorów"
+msgid "User Agreement"
+msgstr "Umowa z użytkownikiem"
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:107
-msgctxt "@label:listbox"
-msgid "Material Color"
-msgstr "Kolor materiału"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
+msgctxt "@button"
+msgid "Decline and close"
+msgstr "Odrzuć i zamknij"
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:111
-msgctxt "@label:listbox"
-msgid "Line Type"
-msgstr "Rodzaj linii"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:29
+msgctxt "@label"
+msgid "Welcome to Ultimaker Cura"
+msgstr "Witaj w Ultimaker Cura"
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:115
-msgctxt "@label:listbox"
-msgid "Feedrate"
-msgstr "Szybkość Posuwu"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:47
+msgctxt "@text"
+msgid ""
+"Please follow these steps to set up\n"
+"Ultimaker Cura. This will only take a few moments."
+msgstr ""
+"Wykonaj poniższe kroki, aby skonfigurować\n"
+"Ultimaker Cura. To zajmie tylko kilka chwil."
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:119
-msgctxt "@label:listbox"
-msgid "Layer thickness"
-msgstr "Grubość warstwy"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:58
+msgctxt "@button"
+msgid "Get started"
+msgstr "Rozpocznij"
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:156
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:24
 msgctxt "@label"
-msgid "Compatibility Mode"
-msgstr "Tryb zgodności"
+msgid "What's new in Ultimaker Cura"
+msgstr "Co nowego w Ultimaker Cura"
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:230
-msgctxt "@label"
-msgid "Travels"
-msgstr "Ruchy"
+#: ModelChecker/plugin.json
+msgctxt "description"
+msgid "Checks models and print configuration for possible printing issues and give suggestions."
+msgstr "Sprawdza możliwe problemy drukowania modeli i konfiguracji wydruku i podaje porady."
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:236
-msgctxt "@label"
-msgid "Helpers"
-msgstr "Pomoce"
+#: ModelChecker/plugin.json
+msgctxt "name"
+msgid "Model Checker"
+msgstr "Sprawdzacz Modelu"
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:242
-msgctxt "@label"
-msgid "Shell"
-msgstr "Obrys"
+#: 3MFReader/plugin.json
+msgctxt "description"
+msgid "Provides support for reading 3MF files."
+msgstr "Zapewnia wsparcie dla czytania plików 3MF."
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:298
-msgctxt "@label"
-msgid "Only Show Top Layers"
-msgstr "Pokaż tylko najwyższe warstwy"
+#: 3MFReader/plugin.json
+msgctxt "name"
+msgid "3MF Reader"
+msgstr "Czytnik 3MF"
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:308
-msgctxt "@label"
-msgid "Show 5 Detailed Layers On Top"
-msgstr "Pokaż 5 Szczegółowych Warstw"
+#: 3MFWriter/plugin.json
+msgctxt "description"
+msgid "Provides support for writing 3MF files."
+msgstr "Zapewnia wsparcie dla tworzenia plików 3MF."
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322
-msgctxt "@label"
-msgid "Top / Bottom"
-msgstr "Góra/ Dół"
+#: 3MFWriter/plugin.json
+msgctxt "name"
+msgid "3MF Writer"
+msgstr "3MF Writer"
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:326
-msgctxt "@label"
-msgid "Inner Wall"
-msgstr "Wewnętrzna ściana"
+#: AMFReader/plugin.json
+msgctxt "description"
+msgid "Provides support for reading AMF files."
+msgstr "Zapewnia wsparcie dla czytania plików AMF."
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:384
-msgctxt "@label"
-msgid "min"
-msgstr "min"
+#: AMFReader/plugin.json
+msgctxt "name"
+msgid "AMF Reader"
+msgstr "Czytnik AMF"
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:433
-msgctxt "@label"
-msgid "max"
-msgstr "max"
+#: CuraDrive/plugin.json
+msgctxt "description"
+msgid "Backup and restore your configuration."
+msgstr "Utwórz kopię zapasową i przywróć konfigurację."
 
-#: /home/ruben/Projects/Cura/plugins/ModelChecker/ModelChecker.qml:22
-msgctxt "@info:tooltip"
-msgid "Some things could be problematic in this print. Click to see tips for adjustment."
-msgstr "Niektóre rzeczy mogą być problematyczne podczas tego wydruku. Kliknij, aby zobaczyć porady dotyczące regulacji."
+#: CuraDrive/plugin.json
+msgctxt "name"
+msgid "Cura Backups"
+msgstr "Kopie zapasowe Cura"
+
+#: CuraEngineBackend/plugin.json
+msgctxt "description"
+msgid "Provides the link to the CuraEngine slicing backend."
+msgstr "Zapewnia połączenie z tnącym zapleczem CuraEngine."
+
+#: CuraEngineBackend/plugin.json
+msgctxt "name"
+msgid "CuraEngine Backend"
+msgstr "Zaplecze CuraEngine"
 
 #: CuraProfileReader/plugin.json
 msgctxt "description"
@@ -5065,125 +5156,125 @@ msgctxt "name"
 msgid "Cura Profile Reader"
 msgstr "Czytnik Profili Cura"
 
-#: SliceInfoPlugin/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "description"
-msgid "Submits anonymous slice info. Can be disabled through preferences."
-msgstr "Zatwierdza anonimowe informację o cięciu. Może być wyłączone w preferencjach."
+msgid "Provides support for exporting Cura profiles."
+msgstr "Zapewnia wsparcie dla eksportowania profili Cura."
 
-#: SliceInfoPlugin/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "name"
-msgid "Slice info"
-msgstr "Informacje o cięciu"
+msgid "Cura Profile Writer"
+msgstr "Cura Profile Writer"
 
-#: ImageReader/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "description"
-msgid "Enables ability to generate printable geometry from 2D image files."
-msgstr "Włącza możliwość generowania drukowalnej geometrii z pliku obrazu 2D."
+msgid "Checks for firmware updates."
+msgstr "Sprawdź aktualizacje oprogramowania."
 
-#: ImageReader/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "name"
-msgid "Image Reader"
-msgstr "Czytnik Obrazu"
+msgid "Firmware Update Checker"
+msgstr "Sprawdzacz Aktualizacji Oprogramowania"
 
-#: MachineSettingsAction/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "description"
-msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
-msgstr "Zapewnia możliwość zmiany ustawień maszyny (takich jak objętość robocza, rozmiar dyszy itp.)."
+msgid "Provides a machine actions for updating firmware."
+msgstr "Dostarcza działanie, pozwalające na aktualizację oprogramowania sprzętowego."
 
-#: MachineSettingsAction/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "name"
-msgid "Machine Settings action"
-msgstr "Ustawienia Maszyny"
+msgid "Firmware Updater"
+msgstr "Aktualizacja oprogramowania sprzętowego"
 
-#: RemovableDriveOutputDevice/plugin.json
+#: GCodeGzReader/plugin.json
 msgctxt "description"
-msgid "Provides removable drive hotplugging and writing support."
-msgstr "Zapewnia wsparcie dla podłączania i zapisywania dysków zewnętrznych."
+msgid "Reads g-code from a compressed archive."
+msgstr "Odczytuje g-code ze skompresowanych archiwum."
 
-#: RemovableDriveOutputDevice/plugin.json
+#: GCodeGzReader/plugin.json
 msgctxt "name"
-msgid "Removable Drive Output Device Plugin"
-msgstr "Wtyczka Urządzenia Wyjścia Dysku Zewnętrznego"
+msgid "Compressed G-code Reader"
+msgstr "Czytnik Skompresowanego G-code"
 
-#: Toolbox/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "description"
-msgid "Find, manage and install new Cura packages."
-msgstr "Znajdź, zarządzaj i instaluj nowe pakiety Cura."
+msgid "Writes g-code to a compressed archive."
+msgstr "Zapisuje g-code do skompresowanego archiwum."
 
-#: Toolbox/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "name"
-msgid "Toolbox"
-msgstr "Narzędzia"
+msgid "Compressed G-code Writer"
+msgstr "Zapisywacz Skompresowanego G-code"
 
-#: AMFReader/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "description"
-msgid "Provides support for reading AMF files."
-msgstr "Zapewnia wsparcie dla czytania plików AMF."
+msgid "Provides support for importing profiles from g-code files."
+msgstr "Zapewnia wsparcie dla importowania profili z plików g-code."
 
-#: AMFReader/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "name"
-msgid "AMF Reader"
-msgstr "Czytnik AMF"
+msgid "G-code Profile Reader"
+msgstr "Czytnik Profili G-code"
 
-#: SolidView/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "description"
-msgid "Provides a normal solid mesh view."
-msgstr "Zapewnia normalny widok siatki."
+msgid "Allows loading and displaying G-code files."
+msgstr "Pozwala na ładowanie i wyświetlanie plików G-code."
 
-#: SolidView/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "name"
-msgid "Solid View"
-msgstr "Widok Bryły"
+msgid "G-code Reader"
+msgstr "Czytnik G-code"
 
-#: UltimakerMachineActions/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "description"
-msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
-msgstr "Zapewnia czynności maszyny dla urządzeń Ultimaker (na przykład kreator poziomowania stołu, wybór ulepszeń itp.)."
+msgid "Writes g-code to a file."
+msgstr "Zapisuje g-code do pliku."
 
-#: UltimakerMachineActions/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "name"
-msgid "Ultimaker machine actions"
-msgstr "Czynności maszyny Ultimaker"
+msgid "G-code Writer"
+msgstr "Zapisywacz G-code"
 
-#: USBPrinting/plugin.json
+#: ImageReader/plugin.json
 msgctxt "description"
-msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
-msgstr "Akceptuje G-Code i wysyła je do drukarki. Wtyczka może też aktualizować oprogramowanie."
+msgid "Enables ability to generate printable geometry from 2D image files."
+msgstr "Włącza możliwość generowania drukowalnej geometrii z pliku obrazu 2D."
 
-#: USBPrinting/plugin.json
+#: ImageReader/plugin.json
 msgctxt "name"
-msgid "USB printing"
-msgstr "Drukowanie USB"
+msgid "Image Reader"
+msgstr "Czytnik Obrazu"
 
-#: UM3NetworkPrinting/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "description"
-msgid "Manages network connections to Ultimaker networked printers."
-msgstr "Zarządza połączeniami z sieciowymi drukarkami Ultimaker."
+msgid "Provides support for importing profiles from legacy Cura versions."
+msgstr "Zapewnia wsparcie dla importowania profili ze starszych wersji Cura."
 
-#: UM3NetworkPrinting/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "name"
-msgid "Ultimaker Network Connection"
-msgstr "Połączenie sieciowe Ultimaker"
+msgid "Legacy Cura Profile Reader"
+msgstr "Czytnik Profili Starszej Cura"
 
-#: 3MFReader/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "description"
-msgid "Provides support for reading 3MF files."
-msgstr "Zapewnia wsparcie dla czytania plików 3MF."
+msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
+msgstr "Zapewnia możliwość zmiany ustawień maszyny (takich jak objętość robocza, rozmiar dyszy itp.)."
 
-#: 3MFReader/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "name"
-msgid "3MF Reader"
-msgstr "Czytnik 3MF"
+msgid "Machine Settings Action"
+msgstr ""
 
-#: SupportEraser/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "description"
-msgid "Creates an eraser mesh to block the printing of support in certain places"
-msgstr "Tworzy siatkę do blokowania drukowania podpór w określonych miejscach"
+msgid "Provides a monitor stage in Cura."
+msgstr "Zapewnia etap monitorowania w Cura."
 
-#: SupportEraser/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "name"
-msgid "Support Eraser"
-msgstr "Usuwacz Podpór"
+msgid "Monitor Stage"
+msgstr "Etap Monitorowania"
 
 #: PerObjectSettingsTool/plugin.json
 msgctxt "description"
@@ -5195,6 +5286,26 @@ msgctxt "name"
 msgid "Per Model Settings Tool"
 msgstr "Narzędzie Ustawień dla Każdego Modelu"
 
+#: PostProcessingPlugin/plugin.json
+msgctxt "description"
+msgid "Extension that allows for user created scripts for post processing"
+msgstr "Dodatek, który pozwala użytkownikowi tworzenie skryptów do post processingu"
+
+#: PostProcessingPlugin/plugin.json
+msgctxt "name"
+msgid "Post Processing"
+msgstr "Post Processing"
+
+#: PrepareStage/plugin.json
+msgctxt "description"
+msgid "Provides a prepare stage in Cura."
+msgstr "Zapewnia etap przygotowania w Cura."
+
+#: PrepareStage/plugin.json
+msgctxt "name"
+msgid "Prepare Stage"
+msgstr "Etap Przygotowania"
+
 #: PreviewStage/plugin.json
 msgctxt "description"
 msgid "Provides a preview stage in Cura."
@@ -5205,95 +5316,145 @@ msgctxt "name"
 msgid "Preview Stage"
 msgstr "Podgląd"
 
-#: XRayView/plugin.json
+#: RemovableDriveOutputDevice/plugin.json
 msgctxt "description"
-msgid "Provides the X-Ray view."
-msgstr "Zapewnia widok rentgena."
+msgid "Provides removable drive hotplugging and writing support."
+msgstr "Zapewnia wsparcie dla podłączania i zapisywania dysków zewnętrznych."
 
-#: XRayView/plugin.json
+#: RemovableDriveOutputDevice/plugin.json
 msgctxt "name"
-msgid "X-Ray View"
-msgstr "Widok Rentgena"
+msgid "Removable Drive Output Device Plugin"
+msgstr "Wtyczka Urządzenia Wyjścia Dysku Zewnętrznego"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
-msgstr "Uaktualnia konfiguracje z Cura 3.5 to Cura 4.0."
+msgid "Logs certain events so that they can be used by the crash reporter"
+msgstr ""
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.5 to 4.0"
-msgstr "Uaktualnij wersję 3.5 do 4.0"
+msgid "Sentry Logger"
+msgstr ""
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: SimulationView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
-msgstr "Ulepsza konfigurację z Cura 2.6 do Cura 2.7."
+msgid "Provides the Simulation view."
+msgstr "Zapewnia widok Symulacji."
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: SimulationView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.6 to 2.7"
-msgstr "Ulepszenie Wersji z 2.6 do 2.7"
+msgid "Simulation View"
+msgstr "Widok Symulacji"
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
-msgstr "Ulepsza konfigurację z Cura 2.1 do Cura 2.2."
+msgid "Submits anonymous slice info. Can be disabled through preferences."
+msgstr "Zatwierdza anonimowe informację o cięciu. Może być wyłączone w preferencjach."
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.1 to 2.2"
-msgstr "Ulepszenie Wersji z 2.1 do 2.2"
+msgid "Slice info"
+msgstr "Informacje o cięciu"
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: SolidView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
-msgstr "Ulepsza konfigurację z Cura 3.4 do Cura 3.5."
+msgid "Provides a normal solid mesh view."
+msgstr "Zapewnia normalny widok siatki."
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: SolidView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.4 to 3.5"
-msgstr "Ulepszenie Wersji z 3.4 do 3.5"
+msgid "Solid View"
+msgstr "Widok Bryły"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
-msgstr ""
+msgid "Creates an eraser mesh to block the printing of support in certain places"
+msgstr "Tworzy siatkę do blokowania drukowania podpór w określonych miejscach"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.4 to 4.5"
-msgstr ""
+msgid "Support Eraser"
+msgstr "Usuwacz Podpór"
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: Toolbox/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
-msgstr "Ulepsza konfigurację z Cura 3.3 do Cura 3.4."
+msgid "Find, manage and install new Cura packages."
+msgstr "Znajdź, zarządzaj i instaluj nowe pakiety Cura."
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: Toolbox/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.3 to 3.4"
-msgstr "Ulepszenie Wersji z 3.3 do 3.4"
+msgid "Toolbox"
+msgstr "Narzędzia"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
-msgstr "Ulepsza konfigurację z Cura 3.0 do Cura 3.1."
+msgid "Provides support for reading model files."
+msgstr "Zapewnia wsparcie dla czytania plików modeli."
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.0 to 3.1"
-msgstr "Ulepszenie Wersji 3.0 do 3.1"
+msgid "Trimesh Reader"
+msgstr "Czytnik siatki trójkątów"
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: UFPReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
-msgstr "Ulepsza konfigurację z Cura 3.2 do Cura 3.3."
+msgid "Provides support for reading Ultimaker Format Packages."
+msgstr "Zapewnia obsługę odczytu pakietów formatu Ultimaker."
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: UFPReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.2 to 3.3"
-msgstr "Ulepszenie Wersji z 3.2 do 3.3"
+msgid "UFP Reader"
+msgstr "Czytnik UFP"
+
+#: UFPWriter/plugin.json
+msgctxt "description"
+msgid "Provides support for writing Ultimaker Format Packages."
+msgstr "Zapewnia wsparcie dla zapisywania Pakietów Formatów Ultimaker."
+
+#: UFPWriter/plugin.json
+msgctxt "name"
+msgid "UFP Writer"
+msgstr "Zapisywacz UFP"
+
+#: UltimakerMachineActions/plugin.json
+msgctxt "description"
+msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
+msgstr "Zapewnia czynności maszyny dla urządzeń Ultimaker (na przykład kreator poziomowania stołu, wybór ulepszeń itp.)."
+
+#: UltimakerMachineActions/plugin.json
+msgctxt "name"
+msgid "Ultimaker machine actions"
+msgstr "Czynności maszyny Ultimaker"
+
+#: UM3NetworkPrinting/plugin.json
+msgctxt "description"
+msgid "Manages network connections to Ultimaker networked printers."
+msgstr "Zarządza połączeniami z sieciowymi drukarkami Ultimaker."
+
+#: UM3NetworkPrinting/plugin.json
+msgctxt "name"
+msgid "Ultimaker Network Connection"
+msgstr "Połączenie sieciowe Ultimaker"
+
+#: USBPrinting/plugin.json
+msgctxt "description"
+msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
+msgstr "Akceptuje G-Code i wysyła je do drukarki. Wtyczka może też aktualizować oprogramowanie."
+
+#: USBPrinting/plugin.json
+msgctxt "name"
+msgid "USB printing"
+msgstr "Drukowanie USB"
+
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
+msgstr "Ulepsza konfigurację z Cura 2.1 do Cura 2.2."
+
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 2.1 to 2.2"
+msgstr "Ulepszenie Wersji z 2.1 do 2.2"
 
 #: VersionUpgrade/VersionUpgrade22to24/plugin.json
 msgctxt "description"
@@ -5315,15 +5476,15 @@ msgctxt "name"
 msgid "Version Upgrade 2.5 to 2.6"
 msgstr "Ulepszenie Wersji z 2.5 do 2.6"
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
-msgstr "Uaktualnia konfiguracje z Cura 4.3 to Cura 4.4."
+msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
+msgstr "Ulepsza konfigurację z Cura 2.6 do Cura 2.7."
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.3 to 4.4"
-msgstr "Uaktualnij wersję 4.3 do 4.4"
+msgid "Version Upgrade 2.6 to 2.7"
+msgstr "Ulepszenie Wersji z 2.6 do 2.7"
 
 #: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "description"
@@ -5335,165 +5496,125 @@ msgctxt "name"
 msgid "Version Upgrade 2.7 to 3.0"
 msgstr "Ulepszenie Wersji 2.7 do 3.0"
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
-msgstr "Uaktualnia konfiguracje z Cura 4.0 to Cura 4.1."
-
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.0 to 4.1"
-msgstr "Uaktualnij wersję 4.0 do 4.1"
-
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
-msgstr "Uaktualnia konfiguracje z Cura 4.2 to Cura 4.3."
-
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.2 to 4.3"
-msgstr "Uaktualnij wersję 4.2 do 4.3"
-
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
-msgstr "Uaktualnia konfiguracje z Cura 4.1 to Cura 4.2."
-
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.1 to 4.2"
-msgstr "Uaktualnij wersję 4.1 do 4.2"
-
-#: GCodeReader/plugin.json
-msgctxt "description"
-msgid "Allows loading and displaying G-code files."
-msgstr "Pozwala na ładowanie i wyświetlanie plików G-code."
-
-#: GCodeReader/plugin.json
-msgctxt "name"
-msgid "G-code Reader"
-msgstr "Czytnik G-code"
-
-#: PostProcessingPlugin/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "description"
-msgid "Extension that allows for user created scripts for post processing"
-msgstr "Dodatek, który pozwala użytkownikowi tworzenie skryptów do post processingu"
+msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
+msgstr "Ulepsza konfigurację z Cura 3.0 do Cura 3.1."
 
-#: PostProcessingPlugin/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "name"
-msgid "Post Processing"
-msgstr "Post Processing"
+msgid "Version Upgrade 3.0 to 3.1"
+msgstr "Ulepszenie Wersji 3.0 do 3.1"
 
-#: CuraEngineBackend/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "description"
-msgid "Provides the link to the CuraEngine slicing backend."
-msgstr "Zapewnia połączenie z tnącym zapleczem CuraEngine."
+msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
+msgstr "Ulepsza konfigurację z Cura 3.2 do Cura 3.3."
 
-#: CuraEngineBackend/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "name"
-msgid "CuraEngine Backend"
-msgstr "Zaplecze CuraEngine"
+msgid "Version Upgrade 3.2 to 3.3"
+msgstr "Ulepszenie Wersji z 3.2 do 3.3"
 
-#: LegacyProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from legacy Cura versions."
-msgstr "Zapewnia wsparcie dla importowania profili ze starszych wersji Cura."
+msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
+msgstr "Ulepsza konfigurację z Cura 3.3 do Cura 3.4."
 
-#: LegacyProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "name"
-msgid "Legacy Cura Profile Reader"
-msgstr "Czytnik Profili Starszej Cura"
+msgid "Version Upgrade 3.3 to 3.4"
+msgstr "Ulepszenie Wersji z 3.3 do 3.4"
 
-#: UFPReader/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "description"
-msgid "Provides support for reading Ultimaker Format Packages."
-msgstr "Zapewnia obsługę odczytu pakietów formatu Ultimaker."
+msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
+msgstr "Ulepsza konfigurację z Cura 3.4 do Cura 3.5."
 
-#: UFPReader/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "name"
-msgid "UFP Reader"
-msgstr "Czytnik UFP"
+msgid "Version Upgrade 3.4 to 3.5"
+msgstr "Ulepszenie Wersji z 3.4 do 3.5"
 
-#: GCodeProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from g-code files."
-msgstr "Zapewnia wsparcie dla importowania profili z plików g-code."
+msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
+msgstr "Uaktualnia konfiguracje z Cura 3.5 to Cura 4.0."
 
-#: GCodeProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
 msgctxt "name"
-msgid "G-code Profile Reader"
-msgstr "Czytnik Profili G-code"
+msgid "Version Upgrade 3.5 to 4.0"
+msgstr "Uaktualnij wersję 3.5 do 4.0"
 
-#: CuraProfileWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "description"
-msgid "Provides support for exporting Cura profiles."
-msgstr "Zapewnia wsparcie dla eksportowania profili Cura."
+msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
+msgstr "Uaktualnia konfiguracje z Cura 4.0 to Cura 4.1."
 
-#: CuraProfileWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "name"
-msgid "Cura Profile Writer"
-msgstr "Cura Profile Writer"
+msgid "Version Upgrade 4.0 to 4.1"
+msgstr "Uaktualnij wersję 4.0 do 4.1"
 
-#: FirmwareUpdater/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "description"
-msgid "Provides a machine actions for updating firmware."
-msgstr "Dostarcza działanie, pozwalające na aktualizację oprogramowania sprzętowego."
+msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
+msgstr "Uaktualnia konfiguracje z Cura 4.1 to Cura 4.2."
 
-#: FirmwareUpdater/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "name"
-msgid "Firmware Updater"
-msgstr "Aktualizacja oprogramowania sprzętowego"
+msgid "Version Upgrade 4.1 to 4.2"
+msgstr "Uaktualnij wersję 4.1 do 4.2"
 
-#: PrepareStage/plugin.json
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
 msgctxt "description"
-msgid "Provides a prepare stage in Cura."
-msgstr "Zapewnia etap przygotowania w Cura."
+msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
+msgstr "Uaktualnia konfiguracje z Cura 4.2 to Cura 4.3."
 
-#: PrepareStage/plugin.json
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
 msgctxt "name"
-msgid "Prepare Stage"
-msgstr "Etap Przygotowania"
+msgid "Version Upgrade 4.2 to 4.3"
+msgstr "Uaktualnij wersję 4.2 do 4.3"
 
-#: TrimeshReader/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "description"
-msgid "Provides support for reading model files."
-msgstr "Zapewnia wsparcie dla czytania plików modeli."
+msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
+msgstr "Uaktualnia konfiguracje z Cura 4.3 to Cura 4.4."
 
-#: TrimeshReader/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "name"
-msgid "Trimesh Reader"
-msgstr "Czytnik siatki trójkątów"
+msgid "Version Upgrade 4.3 to 4.4"
+msgstr "Uaktualnij wersję 4.3 do 4.4"
 
-#: 3MFWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "description"
-msgid "Provides support for writing 3MF files."
-msgstr "Zapewnia wsparcie dla tworzenia plików 3MF."
+msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
+msgstr ""
 
-#: 3MFWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "name"
-msgid "3MF Writer"
-msgstr "3MF Writer"
+msgid "Version Upgrade 4.4 to 4.5"
+msgstr ""
 
-#: GCodeWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a file."
-msgstr "Zapisuje g-code do pliku."
+msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
+msgstr ""
 
-#: GCodeWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "name"
-msgid "G-code Writer"
-msgstr "Zapisywacz G-code"
+msgid "Version Upgrade 4.5 to 4.6"
+msgstr ""
 
-#: MonitorStage/plugin.json
+#: X3DReader/plugin.json
 msgctxt "description"
-msgid "Provides a monitor stage in Cura."
-msgstr "Zapewnia etap monitorowania w Cura."
+msgid "Provides support for reading X3D files."
+msgstr "Zapewnia możliwość czytania plików X3D."
 
-#: MonitorStage/plugin.json
+#: X3DReader/plugin.json
 msgctxt "name"
-msgid "Monitor Stage"
-msgstr "Etap Monitorowania"
+msgid "X3D Reader"
+msgstr "Czytnik X3D"
 
 #: XmlMaterialProfile/plugin.json
 msgctxt "description"
@@ -5505,95 +5626,97 @@ msgctxt "name"
 msgid "Material Profiles"
 msgstr "Profile Materiału"
 
-#: CuraDrive/plugin.json
+#: XRayView/plugin.json
 msgctxt "description"
-msgid "Backup and restore your configuration."
-msgstr "Utwórz kopię zapasową i przywróć konfigurację."
+msgid "Provides the X-Ray view."
+msgstr "Zapewnia widok rentgena."
 
-#: CuraDrive/plugin.json
+#: XRayView/plugin.json
 msgctxt "name"
-msgid "Cura Backups"
-msgstr "Kopie zapasowe Cura"
+msgid "X-Ray View"
+msgstr "Widok Rentgena"
 
-#: X3DReader/plugin.json
-msgctxt "description"
-msgid "Provides support for reading X3D files."
-msgstr "Zapewnia możliwość czytania plików X3D."
+#~ msgctxt "@info:status"
+#~ msgid "Nothing to slice because none of the models fit the build volume or are assigned to a disabled extruder. Please scale or rotate models to fit, or enable an extruder."
+#~ msgstr "Nic do pocięcia, ponieważ żaden z modeli nie mieści się w obszarze roboczym lub jest przypisany do wyłączonego ekstrudera. Skaluj lub obróć modele, aby dopasować lub włącz ekstruder."
 
-#: X3DReader/plugin.json
-msgctxt "name"
-msgid "X3D Reader"
-msgstr "Czytnik X3D"
+#~ msgctxt "@info:backup_status"
+#~ msgid "There was an error listing your backups."
+#~ msgstr "Wystąpił błąd z listą kopii zapasowych."
 
-#: SimulationView/plugin.json
-msgctxt "description"
-msgid "Provides the Simulation view."
-msgstr "Zapewnia widok Symulacji."
+#~ msgctxt "@title:groupbox"
+#~ msgid "User description (Note: Developers may not speak your language, please use English if possible)"
+#~ msgstr "Opis użytkownika (Uwaga: programiści mogą nie mówić w Twoim języku, w miarę możliwości używaj angielskiego)"
 
-#: SimulationView/plugin.json
-msgctxt "name"
-msgid "Simulation View"
-msgstr "Widok Symulacji"
+#~ msgctxt "@title:window"
+#~ msgid "Closing Cura"
+#~ msgstr "Zamykanie Cura"
 
-#: GCodeGzReader/plugin.json
-msgctxt "description"
-msgid "Reads g-code from a compressed archive."
-msgstr "Odczytuje g-code ze skompresowanych archiwum."
+#~ msgctxt "@label"
+#~ msgid "Are you sure you want to exit Cura?"
+#~ msgstr "Czy jesteś pewien, że chcesz zakończyć Cura?"
 
-#: GCodeGzReader/plugin.json
-msgctxt "name"
-msgid "Compressed G-code Reader"
-msgstr "Czytnik Skompresowanego G-code"
+#~ msgctxt "@label"
+#~ msgid "Language:"
+#~ msgstr "Język:"
 
-#: UFPWriter/plugin.json
-msgctxt "description"
-msgid "Provides support for writing Ultimaker Format Packages."
-msgstr "Zapewnia wsparcie dla zapisywania Pakietów Formatów Ultimaker."
+#~ msgctxt "@label"
+#~ msgid "Ultimaker Cloud"
+#~ msgstr "Chmura Ultimaker"
 
-#: UFPWriter/plugin.json
-msgctxt "name"
-msgid "UFP Writer"
-msgstr "Zapisywacz UFP"
+#~ msgctxt "@text"
+#~ msgid "The next generation 3D printing workflow"
+#~ msgstr "Nowa generacja systemu drukowania 3D"
 
-#: ModelChecker/plugin.json
-msgctxt "description"
-msgid "Checks models and print configuration for possible printing issues and give suggestions."
-msgstr "Sprawdza możliwe problemy drukowania modeli i konfiguracji wydruku i podaje porady."
+#~ msgctxt "@text"
+#~ msgid "- Send print jobs to Ultimaker printers outside your local network"
+#~ msgstr "- Wysyłaj zadania druku do drukarek Ultimaker poza siecią lokalną"
 
-#: ModelChecker/plugin.json
-msgctxt "name"
-msgid "Model Checker"
-msgstr "Sprawdzacz Modelu"
+#~ msgctxt "@text"
+#~ msgid "- Store your Ultimaker Cura settings in the cloud for use anywhere"
+#~ msgstr "- Przechowuj ustawienia Ultimaker Cura w chmurze, aby używać w każdym miejscu"
 
-#: SentryLogger/plugin.json
-msgctxt "description"
-msgid "Logs certain events so that they can be used by the crash reporter"
-msgstr ""
+#~ msgctxt "@text"
+#~ msgid "- Get exclusive access to print profiles from leading brands"
+#~ msgstr "- Uzyskaj wyłączny dostęp do profili materiałów wiodących marek"
 
-#: SentryLogger/plugin.json
-msgctxt "name"
-msgid "Sentry Logger"
-msgstr ""
+#~ msgctxt "@label"
+#~ msgid "The value is resolved from per-extruder values "
+#~ msgstr "Wartość jest pobierana z osobna dla każdego ekstrudera "
 
-#: GCodeGzWriter/plugin.json
-msgctxt "description"
-msgid "Writes g-code to a compressed archive."
-msgstr "Zapisuje g-code do skompresowanego archiwum."
+#~ msgctxt "@label"
+#~ msgid "The next generation 3D printing workflow"
+#~ msgstr "Nowa generacja systemu drukowania 3D"
 
-#: GCodeGzWriter/plugin.json
-msgctxt "name"
-msgid "Compressed G-code Writer"
-msgstr "Zapisywacz Skompresowanego G-code"
+#~ msgctxt "@text"
+#~ msgid ""
+#~ "- Send print jobs to Ultimaker printers outside your local network\n"
+#~ "- Store your Ultimaker Cura settings in the cloud for use anywhere\n"
+#~ "- Get exclusive access to print profiles from leading brands"
+#~ msgstr ""
+#~ "- Wysyłaj zadania druku do drukarek Ultimaker poza siecią lokalną\n"
+#~ "- Przechowuj ustawienia Ultimaker Cura w chmurze, aby używać w każdym miejscu\n"
+#~ "- Uzyskaj wyłączny dostęp do profili materiałów wiodących marek"
 
-#: FirmwareUpdateChecker/plugin.json
-msgctxt "description"
-msgid "Checks for firmware updates."
-msgstr "Sprawdź aktualizacje oprogramowania."
+#~ msgctxt "@info:button"
+#~ msgid "Quit Cura"
+#~ msgstr "Zakończ Cura"
 
-#: FirmwareUpdateChecker/plugin.json
-msgctxt "name"
-msgid "Firmware Update Checker"
-msgstr "Sprawdzacz Aktualizacji Oprogramowania"
+#~ msgctxt "@action:checkbox"
+#~ msgid "Infill only"
+#~ msgstr "Tylko wypełnienie"
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "Change active post-processing scripts"
+#~ msgstr "Zmień aktywne skrypty post-processingu"
+
+#~ msgctxt "@label:listbox"
+#~ msgid "Feedrate"
+#~ msgstr "Szybkość Posuwu"
+
+#~ msgctxt "name"
+#~ msgid "Machine Settings action"
+#~ msgstr "Ustawienia Maszyny"
 
 #~ msgctxt "@info:title"
 #~ msgid "New cloud printers found"
@@ -5603,10 +5726,6 @@ msgstr "Sprawdzacz Aktualizacji Oprogramowania"
 #~ msgid "New printers have been found connected to your account, you can find them in your list of discovered printers."
 #~ msgstr "Nowe drukarki podłączone do Twojego konta zostały znalezione, można je odszukać na liście wykrytych drukarek."
 
-msgctxt "@info:option_text"
-msgid "Do not show this message again"
-msgstr "Nie pokazuj tego komunikatu ponownie"
-
 #~ msgctxt "@info:status"
 #~ msgid "Cura does not accurately display layers when Wire Printing is enabled"
 #~ msgstr "Cura nie wyświetla dokładnie warstw kiedy drukowanie przewodowe jest włączone"