Update translation files with new strings in Cura 4.6

Contributes to issue CURA-7344.

3 files changed, 4298 insertions, 4100 deletions

diff --git a/resources/i18n/zh_CN/cura.po b/resources/i18n/zh_CN/cura.po
index ca73c2ffd1..ef332fbc40 100644
--- a/resources/i18n/zh_CN/cura.po
+++ b/resources/i18n/zh_CN/cura.po
@@ -5,8 +5,8 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.5\n"
-"Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-02-07 14:19+0100\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-04-06 16:33+0200\n"
 "PO-Revision-Date: 2020-02-21 16:41+0100\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Chinese <info@lionbridge.com>, PCDotFan <pc@edu.ax>, Chinese <info@bothof.nl>\n"
@@ -17,3111 +17,3362 @@ msgstr ""
 "Plural-Forms: nplurals=1; plural=0;\n"
 "X-Generator: Poedit 2.3\n"
 
-#: /home/ruben/Projects/Cura/plugins/CuraProfileReader/__init__.py:14
-#: /home/ruben/Projects/Cura/plugins/CuraProfileWriter/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura Profile"
-msgstr "Cura 配置文件"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:85
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:104
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:340
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1490
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:188
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:229
+msgctxt "@label"
+msgid "Unknown"
+msgstr "未知"
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "JPG Image"
-msgstr "JPG 图像"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
+msgctxt "@label"
+msgid "The printer(s) below cannot be connected because they are part of a group"
+msgstr "无法连接到下列打印机，因为这些打印机已在组中"
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "JPEG Image"
-msgstr "JPEG 图像"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:117
+msgctxt "@label"
+msgid "Available networked printers"
+msgstr "可用的网络打印机"
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "PNG Image"
-msgstr "PNG 图像"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/ExtrudersModel.py:208
+msgctxt "@menuitem"
+msgid "Not overridden"
+msgstr "未覆盖"
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "BMP Image"
-msgstr "BMP 图像"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:41
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:321
+msgctxt "@label"
+msgid "Default"
+msgstr "Default"
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/__init__.py:30
-msgctxt "@item:inlistbox"
-msgid "GIF Image"
-msgstr "GIF 图像"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:44
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:14
+msgctxt "@label"
+msgid "Visual"
+msgstr "视觉"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:30
-msgctxt "@action"
-msgid "Machine Settings"
-msgstr "打印机设置"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:45
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:15
+msgctxt "@text"
+msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
+msgstr "视觉配置文件用于打印视觉原型和模型，可实现出色的视觉效果和表面质量。"
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Save to Removable Drive"
-msgstr "保存至可移动磁盘"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:48
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:18
+msgctxt "@label"
+msgid "Engineering"
+msgstr "Engineering"
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
-#, python-brace-format
-msgctxt "@item:inlistbox"
-msgid "Save to Removable Drive {0}"
-msgstr "保存到可移动磁盘 {0}"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:49
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:19
+msgctxt "@text"
+msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
+msgstr "工程配置文件用于打印功能性原型和最终用途部件，可提高准确性和减小公差。"
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:64
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:107
-msgctxt "@info:status"
-msgid "There are no file formats available to write with!"
-msgstr "没有可进行写入的文件格式！"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:52
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:22
+msgctxt "@label"
+msgid "Draft"
+msgstr "草稿"
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:94
-#, python-brace-format
-msgctxt "@info:progress Don't translate the XML tags <filename>!"
-msgid "Saving to Removable Drive <filename>{0}</filename>"
-msgstr "保存到可移动磁盘 <filename> {0} </filename>"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:53
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:23
+msgctxt "@text"
+msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
+msgstr "草稿配置文件用于打印初始原型和概念验证，可大大缩短打印时间。"
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:94
-msgctxt "@info:title"
-msgid "Saving"
-msgstr "正在保存"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:213
+msgctxt "@label"
+msgid "Custom Material"
+msgstr "自定义材料"
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:104
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:107
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
-msgstr "无法保存到 <filename>{0}</filename>：<message>{1}</message>"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:214
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
+msgctxt "@label"
+msgid "Custom"
+msgstr "自定义"
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:123
-#, python-brace-format
-msgctxt "@info:status Don't translate the tag {device}!"
-msgid "Could not find a file name when trying to write to {device}."
-msgstr "尝试写入到 {device} 时找不到文件名。"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:359
+msgctxt "@label"
+msgid "Custom profiles"
+msgstr "自定义配置文件"
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:136
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:393
 #, python-brace-format
-msgctxt "@info:status"
-msgid "Could not save to removable drive {0}: {1}"
-msgstr "无法保存到可移动磁盘 {0}：{1}"
+msgctxt "@item:inlistbox"
+msgid "All Supported Types ({0})"
+msgstr "所有支持的文件类型 ({0})"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:394
+msgctxt "@item:inlistbox"
+msgid "All Files (*)"
+msgstr "所有文件 (*)"
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:137
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:1697
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:138
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:145
+#: /home/trin/Gedeeld/Projects/Cura/cura/API/Account.py:81
 msgctxt "@info:title"
-msgid "Error"
-msgstr "错误"
+msgid "Login failed"
+msgstr "登录失败"
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:145
-#, python-brace-format
+#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:66
+#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:30
 msgctxt "@info:status"
-msgid "Saved to Removable Drive {0} as {1}"
-msgstr "保存到可移动磁盘 {0} ：{1}"
+msgid "Finding new location for objects"
+msgstr "正在为模型寻找新位置"
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:145
+#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:70
+#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:34
 msgctxt "@info:title"
-msgid "File Saved"
-msgstr "文件已保存"
-
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:146
-msgctxt "@action:button"
-msgid "Eject"
-msgstr "弹出"
+msgid "Finding Location"
+msgstr "正在寻找位置"
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:146
-#, python-brace-format
-msgctxt "@action"
-msgid "Eject removable device {0}"
-msgstr "弹出可移动设备 {0}"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:149
+#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:103
+#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:108
+msgctxt "@info:status"
+msgid "Unable to find a location within the build volume for all objects"
+msgstr "无法在成形空间体积内放下全部模型"
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:1687
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:1787
-#: /home/ruben/Projects/Cura/cura/OAuth2/AuthorizationService.py:201
+#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150
+#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:104
 msgctxt "@info:title"
-msgid "Warning"
-msgstr "警告"
+msgid "Can't Find Location"
+msgstr "找不到位置"
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Ejected {0}. You can now safely remove the drive."
-msgstr "已弹出 {0}。现在，您可以安全地拔出磁盘。"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:99
+msgctxt "@info:backup_failed"
+msgid "Could not create archive from user data directory: {}"
+msgstr "不能从用户数据目录创建存档: {}"
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
+#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:104
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
 msgctxt "@info:title"
-msgid "Safely Remove Hardware"
-msgstr "安全移除硬件"
+msgid "Backup"
+msgstr "备份"
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
-#, python-brace-format
+#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:114
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup without having proper data or meta data."
+msgstr "试图在没有适当数据或元数据的情况下恢复Cura备份。"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:125
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup that is higher than the current version."
+msgstr "尝试恢复的 Cura 备份版本高于当前版本。"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:95
 msgctxt "@info:status"
-msgid "Failed to eject {0}. Another program may be using the drive."
-msgstr "无法弹出 {0}，另一个程序可能正在使用磁盘。"
+msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
+msgstr "由于“打印序列”设置的值，成形空间体积高度已被减少，以防止十字轴与打印模型相冲突。"
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:72
-msgctxt "@item:intext"
-msgid "Removable Drive"
-msgstr "可移动磁盘"
+#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:97
+msgctxt "@info:title"
+msgid "Build Volume"
+msgstr "成形空间体积"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:93
-msgctxt "@info:generic"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:107
+msgctxt "@title:window"
+msgid "Cura can't start"
+msgstr "Cura 无法启动"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:113
+msgctxt "@label crash message"
 msgid ""
-"\n"
-"Do you want to sync material and software packages with your account?"
+"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
+"                    <p>We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.</p>\n"
+"                    <p>Backups can be found in the configuration folder.</p>\n"
+"                    <p>Please send us this Crash Report to fix the problem.</p>\n"
+"                "
 msgstr ""
-"\n"
-"是否要与您的帐户同步材料和软件包?"
+"<p><b>糟糕，Ultimaker Cura 似乎遇到了问题。</p></b>\n"
+"                    <p>在启动时发生了不可修复的错误。这可能是因某些配置文件出错导致的。建议您备份并重置配置。</p>\n"
+"                    <p>您可在配置文件夹中找到备份。</p>\n"
+"                    <p>请向我们发送此错误报告，以便解决问题。</p>\n"
+"                "
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:94
-#: /home/ruben/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:90
-msgctxt "@info:title"
-msgid "Changes detected from your Ultimaker account"
-msgstr "检测到您的 Ultimaker 帐户有更改"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:122
+msgctxt "@action:button"
+msgid "Send crash report to Ultimaker"
+msgstr "向 Ultimaker 发送错误报告"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:96
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:125
 msgctxt "@action:button"
-msgid "Sync"
-msgstr "同步"
+msgid "Show detailed crash report"
+msgstr "显示详细的错误报告"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
-msgctxt "@button"
-msgid "Decline"
-msgstr "拒绝"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:129
+msgctxt "@action:button"
+msgid "Show configuration folder"
+msgstr "显示配置文件夹"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
-msgctxt "@button"
-msgid "Agree"
-msgstr "同意"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:140
+msgctxt "@action:button"
+msgid "Backup and Reset Configuration"
+msgstr "备份并重置配置"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:169
 msgctxt "@title:window"
-msgid "Plugin License Agreement"
-msgstr "插件许可协议"
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:30
-msgctxt "@button"
-msgid "Decline and remove from account"
-msgstr "拒绝并从帐户中删除"
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:71
-msgctxt "@info:generic"
-msgid "{} plugins failed to download"
-msgstr "{} 个插件下载失败"
+msgid "Crash Report"
+msgstr "错误报告"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:86
-msgctxt "@info:generic"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:188
+msgctxt "@label crash message"
 msgid ""
-"\n"
-"Syncing..."
+"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
+"            <p>Please use the \"Send report\" button to post a bug report automatically to our servers</p>\n"
+"        "
 msgstr ""
-"\n"
-"正在同步..."
+"<p><b>Cura 发生了严重错误。请将这份错误报告发送给我们以便修复问题</p></b>\n"
+"            <p>请使用“发送报告”按钮将错误报告自动发布到我们的服务器</p>\n"
+"        "
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:18
-msgctxt "@info:generic"
-msgid "You need to quit and restart {} before changes have effect."
-msgstr "需要退出并重新启动 {}，然后更改才能生效。"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:196
+msgctxt "@title:groupbox"
+msgid "System information"
+msgstr "系统信息"
 
-#: /home/ruben/Projects/Cura/plugins/AMFReader/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "AMF File"
-msgstr "AMF 文件"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:205
+msgctxt "@label unknown version of Cura"
+msgid "Unknown"
+msgstr "未知"
 
-#: /home/ruben/Projects/Cura/plugins/SolidView/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Solid view"
-msgstr "实体视图"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:216
+msgctxt "@label Cura version number"
+msgid "Cura version"
+msgstr "Cura 版本"
 
-#: /home/ruben/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:21
-msgctxt "@action"
-msgid "Level build plate"
-msgstr "调平打印平台"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:217
+msgctxt "@label"
+msgid "Cura language"
+msgstr "Cura 语言"
 
-#: /home/ruben/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:18
-msgctxt "@action"
-msgid "Select upgrades"
-msgstr "选择升级"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:218
+msgctxt "@label"
+msgid "OS language"
+msgstr "操作系统语言"
 
-#: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
-msgctxt "@item:inmenu"
-msgid "USB printing"
-msgstr "USB 联机打印"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:219
+msgctxt "@label Type of platform"
+msgid "Platform"
+msgstr "平台"
 
-#: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print via USB"
-msgstr "通过 USB 联机打印"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:220
+msgctxt "@label"
+msgid "Qt version"
+msgstr "Qt 版本"
 
-#: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
-msgctxt "@info:tooltip"
-msgid "Print via USB"
-msgstr "通过 USB 联机打印"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:221
+msgctxt "@label"
+msgid "PyQt version"
+msgstr "PyQt 版本"
 
-#: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
-msgctxt "@info:status"
-msgid "Connected via USB"
-msgstr "通过 USB 连接"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:222
+msgctxt "@label OpenGL version"
+msgid "OpenGL"
+msgstr "OpenGL"
 
-#: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:106
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:247
 msgctxt "@label"
-msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
-msgstr "正在进行 USB 打印，关闭 Cura 将停止此打印。您确定吗？"
+msgid "Not yet initialized<br/>"
+msgstr "尚未初始化<br/>"
 
-#: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:128
-msgctxt "@message"
-msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
-msgstr "正在进行打印在上一次打印完成之前，Cura 无法通过 USB 启动另一次打印。"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:250
+#, python-brace-format
+msgctxt "@label OpenGL version"
+msgid "<li>OpenGL Version: {version}</li>"
+msgstr "<li>OpenGL 版本： {version}</li>"
 
-#: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:128
-msgctxt "@message"
-msgid "Print in Progress"
-msgstr "正在进行打印"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:251
+#, python-brace-format
+msgctxt "@label OpenGL vendor"
+msgid "<li>OpenGL Vendor: {vendor}</li>"
+msgstr "<li>OpenGL 供应商： {vendor}</li>"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
-msgctxt "@info:status"
-msgid "tomorrow"
-msgstr "明天"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:252
+#, python-brace-format
+msgctxt "@label OpenGL renderer"
+msgid "<li>OpenGL Renderer: {renderer}</li>"
+msgstr "<li>OpenGL 渲染器： {renderer}</li>"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
-msgctxt "@info:status"
-msgid "today"
-msgstr "今天"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:286
+msgctxt "@title:groupbox"
+msgid "Error traceback"
+msgstr "错误追溯"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:57
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print over network"
-msgstr "通过网络打印"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:372
+msgctxt "@title:groupbox"
+msgid "Logs"
+msgstr "日志"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
-msgctxt "@properties:tooltip"
-msgid "Print over network"
-msgstr "通过网络打印"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:400
+msgctxt "@action:button"
+msgid "Send report"
+msgstr "发送报告"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:495
+msgctxt "@info:progress"
+msgid "Loading machines..."
+msgstr "正在载入打印机..."
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:502
+msgctxt "@info:progress"
+msgid "Setting up preferences..."
+msgstr "正在设置偏好设置..."
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:630
+msgctxt "@info:progress"
+msgid "Initializing Active Machine..."
+msgstr "正在初始化当前机器..."
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:757
+msgctxt "@info:progress"
+msgid "Initializing machine manager..."
+msgstr "正在初始化机器管理器..."
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:771
+msgctxt "@info:progress"
+msgid "Initializing build volume..."
+msgstr "正在初始化成形空间体积..."
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:833
+msgctxt "@info:progress"
+msgid "Setting up scene..."
+msgstr "正在设置场景..."
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:868
+msgctxt "@info:progress"
+msgid "Loading interface..."
+msgstr "正在载入界面..."
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:873
+msgctxt "@info:progress"
+msgid "Initializing engine..."
+msgstr "正在初始化引擎..."
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1166
+#, python-format
+msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
+msgid "%(width).1f x %(depth).1f x %(height).1f mm"
+msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1676
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Connected over the network"
-msgstr "已通过网络连接"
+msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
+msgstr "一次只能加载一个 G-code 文件。{0} 已跳过导入"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1677
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1777
+#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:201
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+msgctxt "@info:title"
+msgid "Warning"
+msgstr "警告"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1686
 #, python-brace-format
 msgctxt "@info:status"
-msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
-msgstr "Cura 已检测到材料配置文件尚未安装到组 {0} 中的主机打印机上。"
+msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
+msgstr "如果加载 G-code，则无法打开其他任何文件。{0} 已跳过导入"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1687
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:138
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:145
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:137
 msgctxt "@info:title"
-msgid "Sending materials to printer"
-msgstr "正在将材料发送到打印机"
+msgid "Error"
+msgstr "错误"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:14
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1776
 msgctxt "@info:status"
-msgid "Sending Print Job"
-msgstr "发送打印作业"
+msgid "The selected model was too small to load."
+msgstr "所选模型过小，无法加载。"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
+#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:29
 msgctxt "@info:status"
-msgid "Uploading print job to printer."
-msgstr "正在将打印作业上传至打印机。"
+msgid "Multiplying and placing objects"
+msgstr "复制并放置模型"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
-msgctxt "@info:text"
-msgid "Could not upload the data to the printer."
-msgstr "无法将数据上传到打印机。"
+#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:30
+msgctxt "@info:title"
+msgid "Placing Objects"
+msgstr "放置模型"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
+#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:108
 msgctxt "@info:title"
-msgid "Network error"
-msgstr "网络错误"
+msgid "Placing Object"
+msgstr "放置模型"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationHelpers.py:79
+msgctxt "@message"
+msgid "Could not read response."
+msgstr "无法读取响应。"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:68
+msgctxt "@message"
+msgid "The provided state is not correct."
+msgstr "所提供的状态不正确。"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:79
+msgctxt "@message"
+msgid "Please give the required permissions when authorizing this application."
+msgstr "在授权此应用程序时，须提供所需权限。"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:86
+msgctxt "@message"
+msgid "Something unexpected happened when trying to log in, please try again."
+msgstr "尝试登录时出现意外情况，请重试。"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:201
+msgctxt "@info"
+msgid "Unable to reach the Ultimaker account server."
+msgstr "无法连接 Ultimaker 帐户服务器。"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:196
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:124
+msgctxt "@title:window"
+msgid "File Already Exists"
+msgstr "文件已存在"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:197
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:125
+#, python-brace-format
+msgctxt "@label Don't translate the XML tag <filename>!"
+msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
+msgstr "文件 <filename>{0}</filename> 已存在。您确定要覆盖它吗？"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:432
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:435
 msgctxt "@info:status"
-msgid "Print job was successfully sent to the printer."
-msgstr "打印作业已成功发送到打印机。"
+msgid "Invalid file URL:"
+msgstr "文件 URL 无效："
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:136
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
+msgstr "无法将配置文件导出至<filename> {0} </filename>： <message>{1}</message>"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:143
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
+msgstr "无法将配置文件导出至<filename> {0} </filename>： 写入器插件报告故障。"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:148
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Exported profile to <filename>{0}</filename>"
+msgstr "配置文件已导出至：<filename> {0} </filename>"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:149
 msgctxt "@info:title"
-msgid "Data Sent"
-msgstr "数据已发送"
+msgid "Export succeeded"
+msgstr "导出成功"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
-msgctxt "@info:status"
-msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
-msgstr "使用您的 Ultimaker account 帐户从任何地方发送和监控打印作业。"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:176
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>: {1}"
+msgstr "无法从 <filename>{0}</filename> 导入配置文件：{1}"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
-msgctxt "@info:status Ultimaker Cloud should not be translated."
-msgid "Connect to Ultimaker Cloud"
-msgstr "连接到 Ultimaker Cloud"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:180
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
+msgstr "无法在添加打印机前从 <filename>{0}</filename> 导入配置文件。"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
-msgctxt "@action"
-msgid "Get started"
-msgstr "开始"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:197
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "No custom profile to import in file <filename>{0}</filename>"
+msgstr "没有可导入文件 <filename>{0}</filename> 的自定义配置文件"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:201
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>:"
+msgstr "无法从 <filename>{0}</filename> 导入配置文件："
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:225
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:235
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
+msgstr "此配置文件 <filename>{0}</filename> 包含错误数据，无法导入。"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:324
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>:"
+msgstr "无法从 <filename>{0}</filename> 导入配置文件："
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:327
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Please wait until the current job has been sent."
-msgstr "请等待当前作业完成发送。"
+msgid "Successfully imported profile {0}"
+msgstr "已成功导入配置文件 {0}"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
-msgctxt "@info:title"
-msgid "Print error"
-msgstr "打印错误"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:330
+#, python-brace-format
+msgctxt "@info:status"
+msgid "File {0} does not contain any valid profile."
+msgstr "文件 {0} 不包含任何有效的配置文件。"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:333
+#, python-brace-format
 msgctxt "@info:status"
-msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
-msgstr "您正在尝试连接未运行 Ultimaker Connect 的打印机。请将打印机更新至最新固件。"
+msgid "Profile {0} has an unknown file type or is corrupted."
+msgstr "配置 {0} 文件类型未知或已损坏。"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
-msgctxt "@info:title"
-msgid "Update your printer"
-msgstr "请更新升级打印机"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:368
+msgctxt "@label"
+msgid "Custom profile"
+msgstr "自定义配置文件"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:384
+msgctxt "@info:status"
+msgid "Profile is missing a quality type."
+msgstr "配置文件缺少打印质量类型定义。"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:398
 #, python-brace-format
 msgctxt "@info:status"
-msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
-msgstr "您正在尝试连接到 {0}，但它不是组中的主机。您可以访问网页，将其配置为组主机。"
+msgid "Could not find a quality type {0} for the current configuration."
+msgstr "无法为当前配置找到质量类型 {0}。"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36
+msgctxt "@info:not supported profile"
+msgid "Not supported"
+msgstr "不支持"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:55
+msgctxt "@info:No intent profile selected"
+msgid "Default"
+msgstr "Default"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:659
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:199
+msgctxt "@label"
+msgid "Nozzle"
+msgstr "喷嘴"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:796
+msgctxt "@info:message Followed by a list of settings."
+msgid "Settings have been changed to match the current availability of extruders:"
+msgstr "已根据挤出机的当前可用性更改设置："
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:798
 msgctxt "@info:title"
-msgid "Not a group host"
-msgstr "非组中的主机"
+msgid "Settings updated"
+msgstr "设置已更新"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
-msgctxt "@action"
-msgid "Configure group"
-msgstr "配置组"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1367
+msgctxt "@info:title"
+msgid "Extruder(s) Disabled"
+msgstr "挤出机已禁用"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:26
-msgctxt "@action"
-msgid "Connect via Network"
-msgstr "通过网络连接"
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:17
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:48
+msgctxt "@action:button"
+msgid "Add"
+msgstr "添加"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:138
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:18
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:406
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:234
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:87
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:296
 msgctxt "@action:button"
-msgid "Print via Cloud"
-msgstr "通过云打印"
+msgid "Cancel"
+msgstr "取消"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:139
-msgctxt "@properties:tooltip"
-msgid "Print via Cloud"
-msgstr "通过云打印"
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/ObjectsModel.py:62
+#, python-brace-format
+msgctxt "@label"
+msgid "Group #{group_nr}"
+msgstr "组 ＃{group_nr}"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:140
-msgctxt "@info:status"
-msgid "Connected via Cloud"
-msgstr "通过云连接"
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:81
+msgctxt "@tooltip"
+msgid "Outer Wall"
+msgstr "外壁"
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/__init__.py:27
-#: /home/ruben/Projects/Cura/plugins/3MFReader/__init__.py:33
-msgctxt "@item:inlistbox"
-msgid "3MF File"
-msgstr "3MF 文件"
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:82
+msgctxt "@tooltip"
+msgid "Inner Walls"
+msgstr "内壁"
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:199
-#: /home/ruben/Projects/Cura/cura/Settings/MachineManager.py:646
-msgctxt "@label"
-msgid "Nozzle"
-msgstr "喷嘴"
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:83
+msgctxt "@tooltip"
+msgid "Skin"
+msgstr "表层"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:84
+msgctxt "@tooltip"
+msgid "Infill"
+msgstr "填充"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:85
+msgctxt "@tooltip"
+msgid "Support Infill"
+msgstr "支撑填充"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:86
+msgctxt "@tooltip"
+msgid "Support Interface"
+msgstr "支撑接触面"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:87
+msgctxt "@tooltip"
+msgid "Support"
+msgstr "支撑"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:88
+msgctxt "@tooltip"
+msgid "Skirt"
+msgstr "Skirt"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:89
+msgctxt "@tooltip"
+msgid "Prime Tower"
+msgstr "装填塔"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:90
+msgctxt "@tooltip"
+msgid "Travel"
+msgstr "移动"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:91
+msgctxt "@tooltip"
+msgid "Retractions"
+msgstr "回抽"
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:497
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:92
+msgctxt "@tooltip"
+msgid "Other"
+msgstr "其它"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:56
+msgctxt "@action:button"
+msgid "Next"
+msgstr "下一步"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:17
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:131
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:169
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:127
+msgctxt "@action:button"
+msgid "Close"
+msgstr "关闭"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:31
+msgctxt "@info:title"
+msgid "3D Model Assistant"
+msgstr "三维模型的助理"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:94
+#, python-brace-format
+msgctxt "@info:status"
+msgid ""
+"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+msgstr ""
+"<p>由于模型的大小和材质的配置，一个或多个3D模型可能无法最优地打印:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>找出如何确保最好的打印质量和可靠性.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">查看打印质量指南</a></p>"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:497
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
 msgstr "项目文件 <filename>{0}</filename> 包含未知机器类型 <message>{1}</message>。无法导入机器。将改为导入模型。"
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:500
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:500
 msgctxt "@info:title"
 msgid "Open Project File"
 msgstr "打开项目文件"
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:186
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:186
 msgctxt "@title:tab"
 msgid "Recommended"
 msgstr "推荐"
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:188
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:188
 msgctxt "@title:tab"
 msgid "Custom"
 msgstr "自定义"
 
-#: /home/ruben/Projects/Cura/plugins/SupportEraser/__init__.py:12
-msgctxt "@label"
-msgid "Support Blocker"
-msgstr "支撑拦截器"
-
-#: /home/ruben/Projects/Cura/plugins/SupportEraser/__init__.py:13
-msgctxt "@info:tooltip"
-msgid "Create a volume in which supports are not printed."
-msgstr "创建一个不打印支撑的体积。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:27
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:33
+msgctxt "@item:inlistbox"
+msgid "3MF File"
+msgstr "3MF 文件"
 
-#: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:14
-msgctxt "@label"
-msgid "Per Model Settings"
-msgstr "单一模型设置"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
+msgctxt "@error:zip"
+msgid "3MF Writer plug-in is corrupt."
+msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:15
-msgctxt "@info:tooltip"
-msgid "Configure Per Model Settings"
-msgstr "设置对每个模型的单独设定"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
+msgctxt "@error:zip"
+msgid "No permission to write the workspace here."
+msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/PreviewStage/__init__.py:13
-msgctxt "@item:inmenu"
-msgid "Preview"
-msgstr "预览"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:181
+msgctxt "@error:zip"
+msgid "Error writing 3mf file."
+msgstr "写入 3mf 文件时出错。"
 
-#: /home/ruben/Projects/Cura/plugins/XRayView/__init__.py:12
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:26
 msgctxt "@item:inlistbox"
-msgid "X-Ray view"
-msgstr "透视视图"
+msgid "3MF file"
+msgstr "3MF 文件"
 
-#: /home/ruben/Projects/Cura/plugins/GCodeReader/__init__.py:14
-#: /home/ruben/Projects/Cura/plugins/GCodeProfileReader/__init__.py:14
-#: /home/ruben/Projects/Cura/plugins/GCodeWriter/__init__.py:16
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:34
 msgctxt "@item:inlistbox"
-msgid "G-code File"
-msgstr "GCode 文件"
+msgid "Cura Project 3MF file"
+msgstr "Cura 项目 3MF 文件"
 
-#: /home/ruben/Projects/Cura/plugins/GCodeReader/__init__.py:18
+#: /home/trin/Gedeeld/Projects/Cura/plugins/AMFReader/__init__.py:15
 msgctxt "@item:inlistbox"
-msgid "G File"
-msgstr "G 文件"
-
-#: /home/ruben/Projects/Cura/plugins/GCodeReader/FlavorParser.py:338
-msgctxt "@info:status"
-msgid "Parsing G-code"
-msgstr "解析 G-code"
+msgid "AMF File"
+msgstr "AMF 文件"
 
-#: /home/ruben/Projects/Cura/plugins/GCodeReader/FlavorParser.py:340
-#: /home/ruben/Projects/Cura/plugins/GCodeReader/FlavorParser.py:494
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
 msgctxt "@info:title"
-msgid "G-code Details"
-msgstr "G-code 详细信息"
+msgid "Backups"
+msgstr "备份"
 
-#: /home/ruben/Projects/Cura/plugins/GCodeReader/FlavorParser.py:492
-msgctxt "@info:generic"
-msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
-msgstr "发送文件之前，请确保 G-code 适用于当前打印机和打印机配置。当前 G-code 文件可能不准确。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27
+msgctxt "@info:backup_status"
+msgid "There was an error while uploading your backup."
+msgstr "上传您的备份时出错。"
 
-#: /home/ruben/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
-msgctxt "@item:inmenu"
-msgid "Post Processing"
-msgstr "后期处理"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47
+msgctxt "@info:backup_status"
+msgid "Creating your backup..."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54
+msgctxt "@info:backup_status"
+msgid "There was an error while creating your backup."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58
+msgctxt "@info:backup_status"
+msgid "Uploading your backup..."
+msgstr "正在上传您的备份..."
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68
+msgctxt "@info:backup_status"
+msgid "Your backup has finished uploading."
+msgstr "您的备份已完成上传。"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107
+msgctxt "@error:file_size"
+msgid "The backup exceeds the maximum file size."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:82
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
+msgctxt "@info:backup_status"
+msgid "There was an error trying to restore your backup."
+msgstr "尝试恢复您的备份时出错。"
 
-#: /home/ruben/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
 msgctxt "@item:inmenu"
-msgid "Modify G-Code"
-msgstr "修改 G-Code"
+msgid "Manage backups"
+msgstr "管理备份"
 
-#: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:331
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:343
 msgctxt "@info:status"
 msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
 msgstr "无法使用当前材料进行切片，因为该材料与所选机器或配置不兼容。"
 
-#: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:331
-#: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:362
-#: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:386
-#: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395
-#: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:404
-#: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:413
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:343
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:374
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:398
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:407
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:416
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
 msgctxt "@info:title"
 msgid "Unable to slice"
 msgstr "无法切片"
 
-#: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:361
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:373
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Unable to slice with the current settings. The following settings have errors: {0}"
 msgstr "无法使用当前设置进行切片。以下设置存在错误：{0}"
 
-#: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:385
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:397
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
 msgstr "因部分特定模型设置而无法切片。 以下设置在一个或多个模型上存在错误： {error_labels}"
 
-#: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:394
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:406
 msgctxt "@info:status"
 msgid "Unable to slice because the prime tower or prime position(s) are invalid."
 msgstr "无法切片（原因：主塔或主位置无效）。"
 
-#: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:403
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:415
 #, python-format
 msgctxt "@info:status"
 msgid "Unable to slice because there are objects associated with disabled Extruder %s."
 msgstr "无法切片，因为存在与已禁用挤出机 %s 相关联的对象。"
 
-#: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:412
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:424
 msgctxt "@info:status"
-msgid "Nothing to slice because none of the models fit the build volume or are assigned to a disabled extruder. Please scale or rotate models to fit, or enable an extruder."
-msgstr "无法切片，因为没有一个模型适合成形空间体积或被分配至已禁用的挤出机。请缩放或旋转模型以匹配，或启用挤出机。"
+msgid ""
+"Please review settings and check if your models:\n"
+"- Fit within the build volume\n"
+"- Are assigned to an enabled extruder\n"
+"- Are not all set as modifier meshes"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:50
-#: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:256
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:50
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:256
 msgctxt "@info:status"
 msgid "Processing Layers"
 msgstr "正在处理层"
 
-#: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:256
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:256
 msgctxt "@info:title"
 msgid "Information"
 msgstr "信息"
 
-#: /home/ruben/Projects/Cura/plugins/LegacyProfileReader/__init__.py:14
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileReader/__init__.py:14
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileWriter/__init__.py:14
 msgctxt "@item:inlistbox"
-msgid "Cura 15.04 profiles"
-msgstr "Cura 15.04 配置文件"
+msgid "Cura Profile"
+msgstr "Cura 配置文件"
 
-#: /home/ruben/Projects/Cura/plugins/UFPReader/__init__.py:22
-#: /home/ruben/Projects/Cura/plugins/UFPWriter/__init__.py:28
-msgctxt "@item:inlistbox"
-msgid "Ultimaker Format Package"
-msgstr "Ultimaker 格式包"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:126
+msgctxt "@info"
+msgid "Could not access update information."
+msgstr "无法获取更新信息。"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#, python-brace-format
+msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
+msgid "New features are available for your {machine_name}! It is recommended to update the firmware on your printer."
+msgstr "您的 {machine_name} 有新功能可用！ 建议您更新打印机上的固件。"
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:25
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:21
+#, python-format
+msgctxt "@info:title The %s gets replaced with the printer name."
+msgid "New %s firmware available"
+msgstr "新 %s 固件可用"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:27
+msgctxt "@action:button"
+msgid "How to update"
+msgstr "如何更新"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:25
 msgctxt "@action"
 msgid "Update Firmware"
 msgstr "更新固件"
 
-#: /home/ruben/Projects/Cura/plugins/PrepareStage/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Prepare"
-msgstr "准备"
-
-#: /home/ruben/Projects/Cura/plugins/TrimeshReader/__init__.py:15
-msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
-msgid "Open Compressed Triangle Mesh"
-msgstr "打开压缩三角网格"
-
-#: /home/ruben/Projects/Cura/plugins/TrimeshReader/__init__.py:19
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzReader/__init__.py:17
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/__init__.py:17
 msgctxt "@item:inlistbox"
-msgid "COLLADA Digital Asset Exchange"
-msgstr "COLLADA 数据资源交换"
+msgid "Compressed G-code File"
+msgstr "压缩 G-code 文件"
 
-#: /home/ruben/Projects/Cura/plugins/TrimeshReader/__init__.py:23
-msgctxt "@item:inlistbox"
-msgid "glTF Binary"
-msgstr "glTF 二进制"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:38
+msgctxt "@error:not supported"
+msgid "GCodeGzWriter does not support text mode."
+msgstr "GCodeGzWriter 不支持文本模式。"
 
-#: /home/ruben/Projects/Cura/plugins/TrimeshReader/__init__.py:27
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeProfileReader/__init__.py:14
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:14
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/__init__.py:16
 msgctxt "@item:inlistbox"
-msgid "glTF Embedded JSON"
-msgstr "glTF 嵌入式 JSON"
+msgid "G-code File"
+msgstr "GCode 文件"
 
-#: /home/ruben/Projects/Cura/plugins/TrimeshReader/__init__.py:36
-msgctxt "@item:inlistbox"
-msgid "Stanford Triangle Format"
-msgstr "斯坦福三角格式"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:341
+msgctxt "@info:status"
+msgid "Parsing G-code"
+msgstr "解析 G-code"
 
-#: /home/ruben/Projects/Cura/plugins/TrimeshReader/__init__.py:40
-msgctxt "@item:inlistbox"
-msgid "Compressed COLLADA Digital Asset Exchange"
-msgstr "压缩 COLLADA 数据资源交换"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:343
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:497
+msgctxt "@info:title"
+msgid "G-code Details"
+msgstr "G-code 详细信息"
 
-#: /home/ruben/Projects/Cura/plugins/3MFWriter/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "3MF file"
-msgstr "3MF 文件"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:495
+msgctxt "@info:generic"
+msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
+msgstr "发送文件之前，请确保 G-code 适用于当前打印机和打印机配置。当前 G-code 文件可能不准确。"
 
-#: /home/ruben/Projects/Cura/plugins/3MFWriter/__init__.py:34
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:18
 msgctxt "@item:inlistbox"
-msgid "Cura Project 3MF file"
-msgstr "Cura 项目 3MF 文件"
-
-#: /home/ruben/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:180
-msgctxt "@error:zip"
-msgid "Error writing 3mf file."
-msgstr "写入 3mf 文件时出错。"
+msgid "G File"
+msgstr "G 文件"
 
-#: /home/ruben/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:66
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:66
 msgctxt "@error:not supported"
 msgid "GCodeWriter does not support non-text mode."
 msgstr "GCodeWriter 不支持非文本模式。"
 
-#: /home/ruben/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:72
-#: /home/ruben/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:88
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:72
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:88
 msgctxt "@warning:status"
 msgid "Please prepare G-code before exporting."
 msgstr "导出前请先准备 G-code。"
 
-#: /home/ruben/Projects/Cura/plugins/MonitorStage/__init__.py:14
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "JPG Image"
+msgstr "JPG 图像"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "JPEG Image"
+msgstr "JPEG 图像"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:22
+msgctxt "@item:inlistbox"
+msgid "PNG Image"
+msgstr "PNG 图像"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "BMP Image"
+msgstr "BMP 图像"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:30
+msgctxt "@item:inlistbox"
+msgid "GIF Image"
+msgstr "GIF 图像"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/LegacyProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura 15.04 profiles"
+msgstr "Cura 15.04 配置文件"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:30
+msgctxt "@action"
+msgid "Machine Settings"
+msgstr "打印机设置"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/__init__.py:14
 msgctxt "@item:inmenu"
 msgid "Monitor"
 msgstr "监控"
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:14
+msgctxt "@label"
+msgid "Per Model Settings"
+msgstr "单一模型设置"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:15
+msgctxt "@info:tooltip"
+msgid "Configure Per Model Settings"
+msgstr "设置对每个模型的单独设定"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
 msgctxt "@item:inmenu"
-msgid "Manage backups"
-msgstr "管理备份"
+msgid "Post Processing"
+msgstr "后期处理"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:37
+msgctxt "@item:inmenu"
+msgid "Modify G-Code"
+msgstr "修改 G-Code"
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:55
-#: /home/ruben/Projects/Cura/cura/Backups/Backup.py:104
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PrepareStage/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Prepare"
+msgstr "准备"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PreviewStage/__init__.py:13
+msgctxt "@item:inmenu"
+msgid "Preview"
+msgstr "预览"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Save to Removable Drive"
+msgstr "保存至可移动磁盘"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
+#, python-brace-format
+msgctxt "@item:inlistbox"
+msgid "Save to Removable Drive {0}"
+msgstr "保存到可移动磁盘 {0}"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:64
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:107
+msgctxt "@info:status"
+msgid "There are no file formats available to write with!"
+msgstr "没有可进行写入的文件格式！"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:94
+#, python-brace-format
+msgctxt "@info:progress Don't translate the XML tags <filename>!"
+msgid "Saving to Removable Drive <filename>{0}</filename>"
+msgstr "保存到可移动磁盘 <filename> {0} </filename>"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:94
 msgctxt "@info:title"
-msgid "Backup"
-msgstr "备份"
+msgid "Saving"
+msgstr "正在保存"
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:55
-msgctxt "@info:backup_status"
-msgid "There was an error listing your backups."
-msgstr "列出您的备份时出错。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:104
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:107
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
+msgstr "无法保存到 <filename>{0}</filename>：<message>{1}</message>"
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:132
-msgctxt "@info:backup_status"
-msgid "There was an error trying to restore your backup."
-msgstr "尝试恢复您的备份时出错。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:123
+#, python-brace-format
+msgctxt "@info:status Don't translate the tag {device}!"
+msgid "Could not find a file name when trying to write to {device}."
+msgstr "尝试写入到 {device} 时找不到文件名。"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:136
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Could not save to removable drive {0}: {1}"
+msgstr "无法保存到可移动磁盘 {0}：{1}"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:145
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Saved to Removable Drive {0} as {1}"
+msgstr "保存到可移动磁盘 {0} ：{1}"
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/UploadBackupJob.py:15
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:145
 msgctxt "@info:title"
-msgid "Backups"
-msgstr "备份"
+msgid "File Saved"
+msgstr "文件已保存"
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/UploadBackupJob.py:27
-msgctxt "@info:backup_status"
-msgid "Uploading your backup..."
-msgstr "正在上传您的备份..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:146
+msgctxt "@action:button"
+msgid "Eject"
+msgstr "弹出"
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/UploadBackupJob.py:36
-msgctxt "@info:backup_status"
-msgid "There was an error while uploading your backup."
-msgstr "上传您的备份时出错。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:146
+#, python-brace-format
+msgctxt "@action"
+msgid "Eject removable device {0}"
+msgstr "弹出可移动设备 {0}"
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/UploadBackupJob.py:39
-msgctxt "@info:backup_status"
-msgid "Your backup has finished uploading."
-msgstr "您的备份已完成上传。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Ejected {0}. You can now safely remove the drive."
+msgstr "已弹出 {0}。现在，您可以安全地拔出磁盘。"
 
-#: /home/ruben/Projects/Cura/plugins/X3DReader/__init__.py:13
-msgctxt "@item:inlistbox"
-msgid "X3D File"
-msgstr "X3D 文件"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
+msgctxt "@info:title"
+msgid "Safely Remove Hardware"
+msgstr "安全移除硬件"
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationView.py:119
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Failed to eject {0}. Another program may be using the drive."
+msgstr "无法弹出 {0}，另一个程序可能正在使用磁盘。"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:75
+msgctxt "@item:intext"
+msgid "Removable Drive"
+msgstr "可移动磁盘"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:119
 msgctxt "@info:status"
 msgid "Cura does not accurately display layers when Wire Printing is enabled."
 msgstr "启用“单线打印”后，Cura 将无法准确地显示打印层。"
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationView.py:120
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:120
 msgctxt "@info:title"
 msgid "Simulation View"
 msgstr "仿真视图"
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationView.py:121
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:121
 msgctxt "@info:status"
 msgid "Nothing is shown because you need to slice first."
 msgstr "由于需要先切片，因此未显示任何内容。"
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationView.py:121
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:121
 msgctxt "@info:title"
 msgid "No layers to show"
 msgstr "无层可显示"
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/__init__.py:15
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:122
+msgctxt "@info:option_text"
+msgid "Do not show this message again"
+msgstr "不再显示此消息"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/__init__.py:15
 msgctxt "@item:inlistbox"
 msgid "Layer view"
 msgstr "分层视图"
 
-#: /home/ruben/Projects/Cura/plugins/GCodeGzReader/__init__.py:17
-#: /home/ruben/Projects/Cura/plugins/GCodeGzWriter/__init__.py:17
-msgctxt "@item:inlistbox"
-msgid "Compressed G-code File"
-msgstr "压缩 G-code 文件"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Solid view"
+msgstr "实体视图"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:12
+msgctxt "@label"
+msgid "Support Blocker"
+msgstr "支撑拦截器"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:13
+msgctxt "@info:tooltip"
+msgid "Create a volume in which supports are not printed."
+msgstr "创建一个不打印支撑的体积。"
 
-#: /home/ruben/Projects/Cura/plugins/ModelChecker/ModelChecker.py:31
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:101
+msgctxt "@info:generic"
+msgid "Do you want to sync material and software packages with your account?"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:102
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:91
 msgctxt "@info:title"
-msgid "3D Model Assistant"
-msgstr "三维模型的助理"
+msgid "Changes detected from your Ultimaker account"
+msgstr "检测到您的 Ultimaker 帐户有更改"
 
-#: /home/ruben/Projects/Cura/plugins/ModelChecker/ModelChecker.py:92
-#, python-brace-format
-msgctxt "@info:status"
-msgid ""
-"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:105
+msgctxt "@action:button"
+msgid "Sync"
+msgstr "同步"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:87
+msgctxt "@info:generic"
+msgid "Syncing..."
 msgstr ""
-"<p>由于模型的大小和材质的配置，一个或多个3D模型可能无法最优地打印:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>找出如何确保最好的打印质量和可靠性.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">查看打印质量指南</a></p>"
 
-#: /home/ruben/Projects/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:38
-msgctxt "@error:not supported"
-msgid "GCodeGzWriter does not support text mode."
-msgstr "GCodeGzWriter 不支持文本模式。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
+msgctxt "@button"
+msgid "Decline"
+msgstr "拒绝"
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:125
-msgctxt "@info"
-msgid "Could not access update information."
-msgstr "无法获取更新信息。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
+msgctxt "@button"
+msgid "Agree"
+msgstr "同意"
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
-#, python-brace-format
-msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
-msgid "New features are available for your {machine_name}! It is recommended to update the firmware on your printer."
-msgstr "您的 {machine_name} 有新功能可用！ 建议您更新打印机上的固件。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
+msgctxt "@title:window"
+msgid "Plugin License Agreement"
+msgstr "插件许可协议"
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:21
-#, python-format
-msgctxt "@info:title The %s gets replaced with the printer name."
-msgid "New %s firmware available"
-msgstr "新 %s 固件可用"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38
+msgctxt "@button"
+msgid "Decline and remove from account"
+msgstr "拒绝并从帐户中删除"
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:27
-msgctxt "@action:button"
-msgid "How to update"
-msgstr "如何更新"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:18
+msgctxt "@info:generic"
+msgid "You need to quit and restart {} before changes have effect."
+msgstr "需要退出并重新启动 {}，然后更改才能生效。"
 
-#: /home/ruben/Projects/Cura/cura/API/Account.py:82
-msgctxt "@info:title"
-msgid "Login failed"
-msgstr "登录失败"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:71
+msgctxt "@info:generic"
+msgid "{} plugins failed to download"
+msgstr "{} 个插件下载失败"
 
-#: /home/ruben/Projects/Cura/cura/BuildVolume.py:95
-msgctxt "@info:status"
-msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
-msgstr "由于“打印序列”设置的值，成形空间体积高度已被减少，以防止十字轴与打印模型相冲突。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:15
+msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
+msgid "Open Compressed Triangle Mesh"
+msgstr "打开压缩三角网格"
 
-#: /home/ruben/Projects/Cura/cura/BuildVolume.py:97
-msgctxt "@info:title"
-msgid "Build Volume"
-msgstr "成形空间体积"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:19
+msgctxt "@item:inlistbox"
+msgid "COLLADA Digital Asset Exchange"
+msgstr "COLLADA 数据资源交换"
 
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:510
-msgctxt "@info:progress"
-msgid "Loading machines..."
-msgstr "正在载入打印机..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:23
+msgctxt "@item:inlistbox"
+msgid "glTF Binary"
+msgstr "glTF 二进制"
 
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:517
-msgctxt "@info:progress"
-msgid "Setting up preferences..."
-msgstr "正在设置偏好设置..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:27
+msgctxt "@item:inlistbox"
+msgid "glTF Embedded JSON"
+msgstr "glTF 嵌入式 JSON"
 
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:645
-msgctxt "@info:progress"
-msgid "Initializing Active Machine..."
-msgstr "正在初始化当前机器..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:36
+msgctxt "@item:inlistbox"
+msgid "Stanford Triangle Format"
+msgstr "斯坦福三角格式"
 
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:767
-msgctxt "@info:progress"
-msgid "Initializing machine manager..."
-msgstr "正在初始化机器管理器..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:40
+msgctxt "@item:inlistbox"
+msgid "Compressed COLLADA Digital Asset Exchange"
+msgstr "压缩 COLLADA 数据资源交换"
 
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:781
-msgctxt "@info:progress"
-msgid "Initializing build volume..."
-msgstr "正在初始化成形空间体积..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPReader/__init__.py:22
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/__init__.py:28
+msgctxt "@item:inlistbox"
+msgid "Ultimaker Format Package"
+msgstr "Ultimaker 格式包"
 
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:843
-msgctxt "@info:progress"
-msgid "Setting up scene..."
-msgstr "正在设置场景..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:21
+msgctxt "@action"
+msgid "Level build plate"
+msgstr "调平打印平台"
 
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:878
-msgctxt "@info:progress"
-msgid "Loading interface..."
-msgstr "正在载入界面..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:18
+msgctxt "@action"
+msgid "Select upgrades"
+msgstr "选择升级"
 
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:883
-msgctxt "@info:progress"
-msgid "Initializing engine..."
-msgstr "正在初始化引擎..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:139
+msgctxt "@action:button"
+msgid "Print via Cloud"
+msgstr "通过云打印"
 
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:1176
-#, python-format
-msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
-msgid "%(width).1f x %(depth).1f x %(height).1f mm"
-msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:140
+msgctxt "@properties:tooltip"
+msgid "Print via Cloud"
+msgstr "通过云打印"
 
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:1686
-#, python-brace-format
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:141
 msgctxt "@info:status"
-msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
-msgstr "一次只能加载一个 G-code 文件。{0} 已跳过导入"
+msgid "Connected via Cloud"
+msgstr "通过云连接"
 
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:1696
-#, python-brace-format
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
 msgctxt "@info:status"
-msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
-msgstr "如果加载 G-code，则无法打开其他任何文件。{0} 已跳过导入"
+msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
+msgstr "使用您的 Ultimaker account 帐户从任何地方发送和监控打印作业。"
 
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:1786
-msgctxt "@info:status"
-msgid "The selected model was too small to load."
-msgstr "所选模型过小，无法加载。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
+msgctxt "@info:status Ultimaker Cloud should not be translated."
+msgid "Connect to Ultimaker Cloud"
+msgstr "连接到 Ultimaker Cloud"
 
-#: /home/ruben/Projects/Cura/cura/Backups/Backup.py:99
-msgctxt "@info:backup_failed"
-msgid "Could not create archive from user data directory: {}"
-msgstr "不能从用户数据目录创建存档: {}"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
+msgctxt "@action"
+msgid "Get started"
+msgstr "开始"
 
-#: /home/ruben/Projects/Cura/cura/Backups/Backup.py:114
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup without having proper data or meta data."
-msgstr "试图在没有适当数据或元数据的情况下恢复Cura备份。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+msgctxt "@info:status"
+msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
+msgstr "您正在尝试连接未运行 Ultimaker Connect 的打印机。请将打印机更新至最新固件。"
 
-#: /home/ruben/Projects/Cura/cura/Backups/Backup.py:125
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup that is higher than the current version."
-msgstr "尝试恢复的 Cura 备份版本高于当前版本。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
+msgctxt "@info:title"
+msgid "Update your printer"
+msgstr "请更新升级打印机"
 
-#: /home/ruben/Projects/Cura/cura/UI/ObjectsModel.py:62
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
 #, python-brace-format
-msgctxt "@label"
-msgid "Group #{group_nr}"
-msgstr "组 ＃{group_nr}"
-
-#: /home/ruben/Projects/Cura/cura/UI/AddPrinterPagesModel.py:17
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:48
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
-msgctxt "@action:button"
-msgid "Add"
-msgstr "添加"
-
-#: /home/ruben/Projects/Cura/cura/UI/AddPrinterPagesModel.py:18
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:87
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:296
-#: /home/ruben/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:234
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:406
-msgctxt "@action:button"
-msgid "Cancel"
-msgstr "取消"
+msgctxt "@info:status"
+msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
+msgstr "Cura 已检测到材料配置文件尚未安装到组 {0} 中的主机打印机上。"
 
-#: /home/ruben/Projects/Cura/cura/UI/WhatsNewPagesModel.py:17
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:124
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:169
-#: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:131
-#: /home/ruben/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
-msgctxt "@action:button"
-msgid "Close"
-msgstr "关闭"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
+msgctxt "@info:title"
+msgid "Sending materials to printer"
+msgstr "正在将材料发送到打印机"
 
-#: /home/ruben/Projects/Cura/cura/UI/PrintInformation.py:81
-msgctxt "@tooltip"
-msgid "Outer Wall"
-msgstr "外壁"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
+#, python-brace-format
+msgctxt "@info:status"
+msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
+msgstr "您正在尝试连接到 {0}，但它不是组中的主机。您可以访问网页，将其配置为组主机。"
 
-#: /home/ruben/Projects/Cura/cura/UI/PrintInformation.py:82
-msgctxt "@tooltip"
-msgid "Inner Walls"
-msgstr "内壁"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
+msgctxt "@info:title"
+msgid "Not a group host"
+msgstr "非组中的主机"
 
-#: /home/ruben/Projects/Cura/cura/UI/PrintInformation.py:83
-msgctxt "@tooltip"
-msgid "Skin"
-msgstr "表层"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
+msgctxt "@action"
+msgid "Configure group"
+msgstr "配置组"
 
-#: /home/ruben/Projects/Cura/cura/UI/PrintInformation.py:84
-msgctxt "@tooltip"
-msgid "Infill"
-msgstr "填充"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+msgctxt "@info:status"
+msgid "Please wait until the current job has been sent."
+msgstr "请等待当前作业完成发送。"
 
-#: /home/ruben/Projects/Cura/cura/UI/PrintInformation.py:85
-msgctxt "@tooltip"
-msgid "Support Infill"
-msgstr "支撑填充"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
+msgctxt "@info:title"
+msgid "Print error"
+msgstr "打印错误"
 
-#: /home/ruben/Projects/Cura/cura/UI/PrintInformation.py:86
-msgctxt "@tooltip"
-msgid "Support Interface"
-msgstr "支撑接触面"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
+msgctxt "@info:text"
+msgid "Could not upload the data to the printer."
+msgstr "无法将数据上传到打印机。"
 
-#: /home/ruben/Projects/Cura/cura/UI/PrintInformation.py:87
-msgctxt "@tooltip"
-msgid "Support"
-msgstr "支撑"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
+msgctxt "@info:title"
+msgid "Network error"
+msgstr "网络错误"
 
-#: /home/ruben/Projects/Cura/cura/UI/PrintInformation.py:88
-msgctxt "@tooltip"
-msgid "Skirt"
-msgstr "Skirt"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:14
+msgctxt "@info:status"
+msgid "Sending Print Job"
+msgstr "发送打印作业"
 
-#: /home/ruben/Projects/Cura/cura/UI/PrintInformation.py:89
-msgctxt "@tooltip"
-msgid "Prime Tower"
-msgstr "装填塔"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
+msgctxt "@info:status"
+msgid "Uploading print job to printer."
+msgstr "正在将打印作业上传至打印机。"
 
-#: /home/ruben/Projects/Cura/cura/UI/PrintInformation.py:90
-msgctxt "@tooltip"
-msgid "Travel"
-msgstr "移动"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
+msgctxt "@info:status"
+msgid "Print job was successfully sent to the printer."
+msgstr "打印作业已成功发送到打印机。"
 
-#: /home/ruben/Projects/Cura/cura/UI/PrintInformation.py:91
-msgctxt "@tooltip"
-msgid "Retractions"
-msgstr "回抽"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
+msgctxt "@info:title"
+msgid "Data Sent"
+msgstr "数据已发送"
 
-#: /home/ruben/Projects/Cura/cura/UI/PrintInformation.py:92
-msgctxt "@tooltip"
-msgid "Other"
-msgstr "其它"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:57
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print over network"
+msgstr "通过网络打印"
 
-#: /home/ruben/Projects/Cura/cura/UI/WelcomePagesModel.py:56
-msgctxt "@action:button"
-msgid "Next"
-msgstr "下一步"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
+msgctxt "@properties:tooltip"
+msgid "Print over network"
+msgstr "通过网络打印"
 
-#: /home/ruben/Projects/Cura/cura/MultiplyObjectsJob.py:29
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
 msgctxt "@info:status"
-msgid "Multiplying and placing objects"
-msgstr "复制并放置模型"
+msgid "Connected over the network"
+msgstr "已通过网络连接"
 
-#: /home/ruben/Projects/Cura/cura/MultiplyObjectsJob.py:30
-msgctxt "@info:title"
-msgid "Placing Objects"
-msgstr "放置模型"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:26
+msgctxt "@action"
+msgid "Connect via Network"
+msgstr "通过网络连接"
 
-#: /home/ruben/Projects/Cura/cura/MultiplyObjectsJob.py:108
-#: /home/ruben/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:103
-#: /home/ruben/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:149
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
 msgctxt "@info:status"
-msgid "Unable to find a location within the build volume for all objects"
-msgstr "无法在成形空间体积内放下全部模型"
-
-#: /home/ruben/Projects/Cura/cura/MultiplyObjectsJob.py:108
-msgctxt "@info:title"
-msgid "Placing Object"
-msgstr "放置模型"
+msgid "tomorrow"
+msgstr "明天"
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11
-#: /home/ruben/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:41
-#: /home/ruben/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:321
-msgctxt "@label"
-msgid "Default"
-msgstr "Default"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+msgctxt "@info:status"
+msgid "today"
+msgstr "今天"
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/IntentTranslations.py:14
-#: /home/ruben/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:44
-msgctxt "@label"
-msgid "Visual"
-msgstr "视觉"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
+msgctxt "@item:inmenu"
+msgid "USB printing"
+msgstr "USB 联机打印"
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/IntentTranslations.py:15
-#: /home/ruben/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:45
-msgctxt "@text"
-msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
-msgstr "视觉配置文件用于打印视觉原型和模型，可实现出色的视觉效果和表面质量。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print via USB"
+msgstr "通过 USB 联机打印"
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/IntentTranslations.py:18
-#: /home/ruben/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:48
-msgctxt "@label"
-msgid "Engineering"
-msgstr "Engineering"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
+msgctxt "@info:tooltip"
+msgid "Print via USB"
+msgstr "通过 USB 联机打印"
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/IntentTranslations.py:19
-#: /home/ruben/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:49
-msgctxt "@text"
-msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
-msgstr "工程配置文件用于打印功能性原型和最终用途部件，可提高准确性和减小公差。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
+msgctxt "@info:status"
+msgid "Connected via USB"
+msgstr "通过 USB 连接"
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/IntentTranslations.py:22
-#: /home/ruben/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:52
+#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:106
 msgctxt "@label"
-msgid "Draft"
-msgstr "草稿"
+msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
+msgstr "正在进行 USB 打印，关闭 Cura 将停止此打印。您确定吗？"
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/IntentTranslations.py:23
-#: /home/ruben/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:53
-msgctxt "@text"
-msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
-msgstr "草稿配置文件用于打印初始原型和概念验证，可大大缩短打印时间。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:128
+msgctxt "@message"
+msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
+msgstr "正在进行打印在上一次打印完成之前，Cura 无法通过 USB 启动另一次打印。"
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:85
-#: /home/ruben/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:104
-#: /home/ruben/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:340
-#: /home/ruben/Projects/Cura/cura/Settings/MachineManager.py:1474
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:184
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:225
-msgctxt "@label"
-msgid "Unknown"
-msgstr "未知"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:128
+msgctxt "@message"
+msgid "Print in Progress"
+msgstr "正在进行打印"
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
-msgctxt "@label"
-msgid "The printer(s) below cannot be connected because they are part of a group"
-msgstr "无法连接到下列打印机，因为这些打印机已在组中"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/X3DReader/__init__.py:13
+msgctxt "@item:inlistbox"
+msgid "X3D File"
+msgstr "X3D 文件"
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:117
-msgctxt "@label"
-msgid "Available networked printers"
-msgstr "可用的网络打印机"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/XRayView/__init__.py:12
+msgctxt "@item:inlistbox"
+msgid "X-Ray view"
+msgstr "透视视图"
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/ExtrudersModel.py:208
-msgctxt "@menuitem"
-msgid "Not overridden"
-msgstr "未覆盖"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.qml:22
+msgctxt "@info:tooltip"
+msgid "Some things could be problematic in this print. Click to see tips for adjustment."
+msgstr "此次打印可能出现了某些问题。点击查看调整提示。"
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:213
-msgctxt "@label"
-msgid "Custom Material"
-msgstr "自定义材料"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:14
+msgctxt "@title:window"
+msgid "Open Project"
+msgstr "打开项目"
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:214
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
-msgctxt "@label"
-msgid "Custom"
-msgstr "自定义"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:58
+msgctxt "@action:ComboBox Update/override existing profile"
+msgid "Update existing"
+msgstr "更新已有配置"
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:359
-msgctxt "@label"
-msgid "Custom profiles"
-msgstr "自定义配置文件"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:59
+msgctxt "@action:ComboBox Save settings in a new profile"
+msgid "Create new"
+msgstr "新建"
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:393
-#, python-brace-format
-msgctxt "@item:inlistbox"
-msgid "All Supported Types ({0})"
-msgstr "所有支持的文件类型 ({0})"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:70
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:73
+msgctxt "@action:title"
+msgid "Summary - Cura Project"
+msgstr "摘要 - Cura 项目"
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:394
-msgctxt "@item:inlistbox"
-msgid "All Files (*)"
-msgstr "所有文件 (*)"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:92
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:97
+msgctxt "@action:label"
+msgid "Printer settings"
+msgstr "打印机设置"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:90
-msgctxt "@title:window"
-msgid "Cura can't start"
-msgstr "Cura 无法启动"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:108
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the machine be resolved?"
+msgstr "机器的设置冲突应如何解决？"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:96
-msgctxt "@label crash message"
-msgid ""
-"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
-"                    <p>We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.</p>\n"
-"                    <p>Backups can be found in the configuration folder.</p>\n"
-"                    <p>Please send us this Crash Report to fix the problem.</p>\n"
-"                "
-msgstr ""
-"<p><b>糟糕，Ultimaker Cura 似乎遇到了问题。</p></b>\n"
-"                    <p>在启动时发生了不可修复的错误。这可能是因某些配置文件出错导致的。建议您备份并重置配置。</p>\n"
-"                    <p>您可在配置文件夹中找到备份。</p>\n"
-"                    <p>请向我们发送此错误报告，以便解决问题。</p>\n"
-"                "
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:115
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:124
+msgctxt "@action:ComboBox option"
+msgid "Update"
+msgstr "更新"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:105
-msgctxt "@action:button"
-msgid "Send crash report to Ultimaker"
-msgstr "向 Ultimaker 发送错误报告"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:116
+msgctxt "@action:ComboBox option"
+msgid "Create new"
+msgstr "新建"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:108
-msgctxt "@action:button"
-msgid "Show detailed crash report"
-msgstr "显示详细的错误报告"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:143
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:106
+msgctxt "@action:label"
+msgid "Type"
+msgstr "类型"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:112
-msgctxt "@action:button"
-msgid "Show configuration folder"
-msgstr "显示配置文件夹"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:159
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:121
+msgctxt "@action:label"
+msgid "Printer Group"
+msgstr "打印机组"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:123
-msgctxt "@action:button"
-msgid "Backup and Reset Configuration"
-msgstr "备份并重置配置"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:180
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:222
+msgctxt "@action:label"
+msgid "Profile settings"
+msgstr "配置文件设置"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:152
-msgctxt "@title:window"
-msgid "Crash Report"
-msgstr "错误报告"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:196
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the profile be resolved?"
+msgstr "配置文件中的冲突如何解决？"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:172
-msgctxt "@label crash message"
-msgid ""
-"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
-"            <p>Please use the \"Send report\" button to post a bug report automatically to our servers</p>\n"
-"        "
-msgstr ""
-"<p><b>Cura 发生了严重错误。请将这份错误报告发送给我们以便修复问题</p></b>\n"
-"            <p>请使用“发送报告”按钮将错误报告自动发布到我们的服务器</p>\n"
-"        "
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:216
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:323
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:121
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:246
+msgctxt "@action:label"
+msgid "Name"
+msgstr "名字"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:180
-msgctxt "@title:groupbox"
-msgid "System information"
-msgstr "系统信息"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:231
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:263
+msgctxt "@action:label"
+msgid "Intent"
+msgstr "Intent"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:189
-msgctxt "@label unknown version of Cura"
-msgid "Unknown"
-msgstr "未知"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:246
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:230
+msgctxt "@action:label"
+msgid "Not in profile"
+msgstr "不在配置文件中"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:200
-msgctxt "@label Cura version number"
-msgid "Cura version"
-msgstr "Cura 版本"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:251
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:235
+msgctxt "@action:label"
+msgid "%1 override"
+msgid_plural "%1 overrides"
+msgstr[0] "%1 重写"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:201
-msgctxt "@label"
-msgid "Cura language"
-msgstr "Cura 语言"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:262
+msgctxt "@action:label"
+msgid "Derivative from"
+msgstr "衍生自"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:202
-msgctxt "@label"
-msgid "OS language"
-msgstr "操作系统语言"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:267
+msgctxt "@action:label"
+msgid "%1, %2 override"
+msgid_plural "%1, %2 overrides"
+msgstr[0] "%1, %2 重写"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:203
-msgctxt "@label Type of platform"
-msgid "Platform"
-msgstr "平台"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:283
+msgctxt "@action:label"
+msgid "Material settings"
+msgstr "材料设置"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:204
-msgctxt "@label"
-msgid "Qt version"
-msgstr "Qt 版本"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:299
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the material be resolved?"
+msgstr "材料的设置冲突应如何解决？"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:205
-msgctxt "@label"
-msgid "PyQt version"
-msgstr "PyQt 版本"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:342
+msgctxt "@action:label"
+msgid "Setting visibility"
+msgstr "设置可见性"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:206
-msgctxt "@label OpenGL version"
-msgid "OpenGL"
-msgstr "OpenGL"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:351
+msgctxt "@action:label"
+msgid "Mode"
+msgstr "模式"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:231
-msgctxt "@label"
-msgid "Not yet initialized<br/>"
-msgstr "尚未初始化<br/>"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:367
+msgctxt "@action:label"
+msgid "Visible settings:"
+msgstr "可见设置："
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:234
-#, python-brace-format
-msgctxt "@label OpenGL version"
-msgid "<li>OpenGL Version: {version}</li>"
-msgstr "<li>OpenGL 版本： {version}</li>"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:372
+msgctxt "@action:label"
+msgid "%1 out of %2"
+msgstr "%1 / %2"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:235
-#, python-brace-format
-msgctxt "@label OpenGL vendor"
-msgid "<li>OpenGL Vendor: {vendor}</li>"
-msgstr "<li>OpenGL 供应商： {vendor}</li>"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:398
+msgctxt "@action:warning"
+msgid "Loading a project will clear all models on the build plate."
+msgstr "加载项目将清除打印平台上的所有模型。"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:236
-#, python-brace-format
-msgctxt "@label OpenGL renderer"
-msgid "<li>OpenGL Renderer: {renderer}</li>"
-msgstr "<li>OpenGL 渲染器： {renderer}</li>"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:416
+msgctxt "@action:button"
+msgid "Open"
+msgstr "打开"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:270
-msgctxt "@title:groupbox"
-msgid "Error traceback"
-msgstr "错误追溯"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
+msgctxt "@button"
+msgid "Want more?"
+msgstr "想要更多？"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:356
-msgctxt "@title:groupbox"
-msgid "Logs"
-msgstr "日志"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
+msgctxt "@button"
+msgid "Backup Now"
+msgstr "立即备份"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:379
-msgctxt "@title:groupbox"
-msgid "User description (Note: Developers may not speak your language, please use English if possible)"
-msgstr "用户说明（注意：为避免开发人员可能不熟悉您的语言，请尽量使用英语）"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
+msgctxt "@checkbox:description"
+msgid "Auto Backup"
+msgstr "自动备份"
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:399
-msgctxt "@action:button"
-msgid "Send report"
-msgstr "发送报告"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
+msgctxt "@checkbox:description"
+msgid "Automatically create a backup each day that Cura is started."
+msgstr "在 Cura 每天启动时自动创建备份。"
 
-#: /home/ruben/Projects/Cura/cura/Settings/ContainerManager.py:196
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:124
-msgctxt "@title:window"
-msgid "File Already Exists"
-msgstr "文件已存在"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
+msgctxt "@button"
+msgid "Restore"
+msgstr "恢复"
 
-#: /home/ruben/Projects/Cura/cura/Settings/ContainerManager.py:197
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:125
-#, python-brace-format
-msgctxt "@label Don't translate the XML tag <filename>!"
-msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
-msgstr "文件 <filename>{0}</filename> 已存在。您确定要覆盖它吗？"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
+msgctxt "@dialog:title"
+msgid "Delete Backup"
+msgstr "删除备份"
 
-#: /home/ruben/Projects/Cura/cura/Settings/ContainerManager.py:430
-#: /home/ruben/Projects/Cura/cura/Settings/ContainerManager.py:433
-msgctxt "@info:status"
-msgid "Invalid file URL:"
-msgstr "文件 URL 无效："
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
+msgctxt "@dialog:info"
+msgid "Are you sure you want to delete this backup? This cannot be undone."
+msgstr "您确定要删除此备份吗？此操作无法撤销。"
 
-#: /home/ruben/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36
-msgctxt "@info:not supported profile"
-msgid "Not supported"
-msgstr "不支持"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
+msgctxt "@dialog:title"
+msgid "Restore Backup"
+msgstr "恢复备份"
 
-#: /home/ruben/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:55
-msgctxt "@info:No intent profile selected"
-msgid "Default"
-msgstr "Default"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
+msgctxt "@dialog:info"
+msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
+msgstr "您需要重新启动 Cura 才能恢复备份。您要立即关闭 Cura 吗？"
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:136
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
-msgstr "无法将配置文件导出至<filename> {0} </filename>： <message>{1}</message>"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
+msgctxt "@backuplist:label"
+msgid "Cura Version"
+msgstr "Cura 版本"
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:143
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
-msgstr "无法将配置文件导出至<filename> {0} </filename>： 写入器插件报告故障。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
+msgctxt "@backuplist:label"
+msgid "Machines"
+msgstr "机器"
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:148
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Exported profile to <filename>{0}</filename>"
-msgstr "配置文件已导出至：<filename> {0} </filename>"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
+msgctxt "@backuplist:label"
+msgid "Materials"
+msgstr "材料"
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:149
-msgctxt "@info:title"
-msgid "Export succeeded"
-msgstr "导出成功"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
+msgctxt "@backuplist:label"
+msgid "Profiles"
+msgstr "配置文件"
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:176
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>: {1}"
-msgstr "无法从 <filename>{0}</filename> 导入配置文件：{1}"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
+msgctxt "@backuplist:label"
+msgid "Plugins"
+msgstr "插件"
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:180
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
-msgstr "无法在添加打印机前从 <filename>{0}</filename> 导入配置文件。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/main.qml:25
+msgctxt "@title:window"
+msgid "Cura Backups"
+msgstr "Cura 备份"
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:197
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "No custom profile to import in file <filename>{0}</filename>"
-msgstr "没有可导入文件 <filename>{0}</filename> 的自定义配置文件"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
+msgctxt "@title"
+msgid "My Backups"
+msgstr "我的备份"
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:201
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>:"
-msgstr "无法从 <filename>{0}</filename> 导入配置文件："
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
+msgctxt "@empty_state"
+msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
+msgstr "您目前没有任何备份。使用“立即备份”按钮创建一个备份。"
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:225
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:235
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
-msgstr "此配置文件 <filename>{0}</filename> 包含错误数据，无法导入。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
+msgctxt "@backup_limit_info"
+msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
+msgstr "在预览阶段，将限制为 5 个可见备份。移除一个备份以查看更早的备份。"
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:324
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>:"
-msgstr "无法从 <filename>{0}</filename> 导入配置文件："
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
+msgctxt "@description"
+msgid "Backup and synchronize your Cura settings."
+msgstr "备份并同步您的 Cura 设置。"
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:327
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Successfully imported profile {0}"
-msgstr "已成功导入配置文件 {0}"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:48
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:68
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:138
+msgctxt "@button"
+msgid "Sign in"
+msgstr "登录"
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:330
-#, python-brace-format
-msgctxt "@info:status"
-msgid "File {0} does not contain any valid profile."
-msgstr "文件 {0} 不包含任何有效的配置文件。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
+msgctxt "@title"
+msgid "Update Firmware"
+msgstr "更新固件"
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:333
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Profile {0} has an unknown file type or is corrupted."
-msgstr "配置 {0} 文件类型未知或已损坏。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
+msgctxt "@label"
+msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
+msgstr "固件是直接在 3D 打印机上运行的一个软件。此固件控制步进电机，调节温度并最终使打印机正常工作。"
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:368
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
 msgctxt "@label"
-msgid "Custom profile"
-msgstr "自定义配置文件"
+msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
+msgstr "新打印机出厂配备的固件完全可以正常使用，但新版本往往具有更多的新功能和改进。"
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:384
-msgctxt "@info:status"
-msgid "Profile is missing a quality type."
-msgstr "配置文件缺少打印质量类型定义。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
+msgctxt "@action:button"
+msgid "Automatically upgrade Firmware"
+msgstr "自动升级固件"
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:398
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Could not find a quality type {0} for the current configuration."
-msgstr "无法为当前配置找到质量类型 {0}。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
+msgctxt "@action:button"
+msgid "Upload custom Firmware"
+msgstr "上传自定义固件"
 
-#: /home/ruben/Projects/Cura/cura/Settings/MachineManager.py:780
-msgctxt "@info:message Followed by a list of settings."
-msgid "Settings have been changed to match the current availability of extruders:"
-msgstr "已根据挤出机的当前可用性更改设置："
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
+msgctxt "@label"
+msgid "Firmware can not be updated because there is no connection with the printer."
+msgstr "未连接打印机，无法更新固件。"
 
-#: /home/ruben/Projects/Cura/cura/Settings/MachineManager.py:782
-msgctxt "@info:title"
-msgid "Settings updated"
-msgstr "设置已更新"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
+msgctxt "@label"
+msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
+msgstr "与打印机间的连接不支持固件更新，因此无法更新固件。"
 
-#: /home/ruben/Projects/Cura/cura/Settings/MachineManager.py:1351
-msgctxt "@info:title"
-msgid "Extruder(s) Disabled"
-msgstr "挤出机已禁用"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
+msgctxt "@title:window"
+msgid "Select custom firmware"
+msgstr "选择自定义固件"
 
-#: /home/ruben/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:30
-#: /home/ruben/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:66
-msgctxt "@info:status"
-msgid "Finding new location for objects"
-msgstr "正在为模型寻找新位置"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
+msgctxt "@title:window"
+msgid "Firmware Update"
+msgstr "固件升级"
 
-#: /home/ruben/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:34
-#: /home/ruben/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:70
-msgctxt "@info:title"
-msgid "Finding Location"
-msgstr "正在寻找位置"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
+msgctxt "@label"
+msgid "Updating firmware."
+msgstr "更新固件中..."
 
-#: /home/ruben/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:104
-#: /home/ruben/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150
-msgctxt "@info:title"
-msgid "Can't Find Location"
-msgstr "找不到位置"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
+msgctxt "@label"
+msgid "Firmware update completed."
+msgstr "固件更新已完成。"
 
-#: /home/ruben/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:68
-msgctxt "@message"
-msgid "The provided state is not correct."
-msgstr "所提供的状态不正确。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
+msgctxt "@label"
+msgid "Firmware update failed due to an unknown error."
+msgstr "由于未知错误，固件更新失败。"
 
-#: /home/ruben/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:79
-msgctxt "@message"
-msgid "Please give the required permissions when authorizing this application."
-msgstr "在授权此应用程序时，须提供所需权限。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
+msgctxt "@label"
+msgid "Firmware update failed due to an communication error."
+msgstr "由于通信错误，导致固件升级失败。"
 
-#: /home/ruben/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:86
-msgctxt "@message"
-msgid "Something unexpected happened when trying to log in, please try again."
-msgstr "尝试登录时出现意外情况，请重试。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
+msgctxt "@label"
+msgid "Firmware update failed due to an input/output error."
+msgstr "由于输入/输出错误，导致固件升级失败。"
 
-#: /home/ruben/Projects/Cura/cura/OAuth2/AuthorizationService.py:201
-msgctxt "@info"
-msgid "Unable to reach the Ultimaker account server."
-msgstr "无法连接 Ultimaker 帐户服务器。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
+msgctxt "@label"
+msgid "Firmware update failed due to missing firmware."
+msgstr "由于固件丢失，导致固件升级失败。"
 
-#: /home/ruben/Projects/Cura/cura/OAuth2/AuthorizationHelpers.py:79
-msgctxt "@message"
-msgid "Could not read response."
-msgstr "无法读取响应。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:19
+msgctxt "@title:window"
+msgid "Convert Image..."
+msgstr "转换图像..."
 
-#: /home/ruben/Projects/Cura/resources/qml/MonitorButton.qml:119
-msgctxt "@label:MonitorStatus"
-msgid "Not connected to a printer"
-msgstr "未连接至打印机"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:33
+msgctxt "@info:tooltip"
+msgid "The maximum distance of each pixel from \"Base.\""
+msgstr "每个像素与底板的最大距离"
 
-#: /home/ruben/Projects/Cura/resources/qml/MonitorButton.qml:123
-msgctxt "@label:MonitorStatus"
-msgid "Printer does not accept commands"
-msgstr "打印机不接受命令"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:38
+msgctxt "@action:label"
+msgid "Height (mm)"
+msgstr "高度 (mm)"
 
-#: /home/ruben/Projects/Cura/resources/qml/MonitorButton.qml:133
-msgctxt "@label:MonitorStatus"
-msgid "In maintenance. Please check the printer"
-msgstr "维护中。请检查打印机"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:56
+msgctxt "@info:tooltip"
+msgid "The base height from the build plate in millimeters."
+msgstr "距离打印平台的底板高度，以毫米为单位。"
 
-#: /home/ruben/Projects/Cura/resources/qml/MonitorButton.qml:144
-msgctxt "@label:MonitorStatus"
-msgid "Lost connection with the printer"
-msgstr "与打印机的连接中断"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:61
+msgctxt "@action:label"
+msgid "Base (mm)"
+msgstr "底板 (mm)"
 
-#: /home/ruben/Projects/Cura/resources/qml/MonitorButton.qml:146
-msgctxt "@label:MonitorStatus"
-msgid "Printing..."
-msgstr "打印中..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:79
+msgctxt "@info:tooltip"
+msgid "The width in millimeters on the build plate."
+msgstr "打印平台宽度，以毫米为单位。"
 
-#: /home/ruben/Projects/Cura/resources/qml/MonitorButton.qml:149
-msgctxt "@label:MonitorStatus"
-msgid "Paused"
-msgstr "已暂停"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:84
+msgctxt "@action:label"
+msgid "Width (mm)"
+msgstr "宽度 (mm)"
 
-#: /home/ruben/Projects/Cura/resources/qml/MonitorButton.qml:152
-msgctxt "@label:MonitorStatus"
-msgid "Preparing..."
-msgstr "初始化中..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:103
+msgctxt "@info:tooltip"
+msgid "The depth in millimeters on the build plate"
+msgstr "打印平台深度，以毫米为单位"
 
-#: /home/ruben/Projects/Cura/resources/qml/MonitorButton.qml:154
-msgctxt "@label:MonitorStatus"
-msgid "Please remove the print"
-msgstr "请取出打印件"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:108
+msgctxt "@action:label"
+msgid "Depth (mm)"
+msgstr "深度 (mm)"
 
-#: /home/ruben/Projects/Cura/resources/qml/MonitorButton.qml:284
-#: /home/ruben/Projects/Cura/resources/qml/MonitorButton.qml:293
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
-msgctxt "@label"
-msgid "Pause"
-msgstr "暂停"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:126
+msgctxt "@info:tooltip"
+msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
+msgstr "在影像浮雕中，为了阻挡更多光源通过，深色像素应对应于较厚的位置。在高度图中，浅色像素代表着更高的地形，因此浅色像素对应于生成的 3D 模型中较厚的位置。"
 
-#: /home/ruben/Projects/Cura/resources/qml/MonitorButton.qml:289
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
-msgctxt "@label"
-msgid "Resume"
-msgstr "恢复"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
+msgctxt "@item:inlistbox"
+msgid "Darker is higher"
+msgstr "颜色越深厚度越大"
 
-#: /home/ruben/Projects/Cura/resources/qml/MonitorButton.qml:325
-msgctxt "@label"
-msgid "Abort Print"
-msgstr "中止打印"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
+msgctxt "@item:inlistbox"
+msgid "Lighter is higher"
+msgstr "颜色越浅厚度越大"
 
-#: /home/ruben/Projects/Cura/resources/qml/MonitorButton.qml:335
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
-msgctxt "@window:title"
-msgid "Abort print"
-msgstr "中止打印"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:149
+msgctxt "@info:tooltip"
+msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
+msgstr "对于隐雕，提供一个用于半透明的简单对数模型。对于高度图，像素值与高度线性对应。"
 
-#: /home/ruben/Projects/Cura/resources/qml/MonitorButton.qml:337
-msgctxt "@label"
-msgid "Are you sure you want to abort the print?"
-msgstr "您确定要中止打印吗？"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
+msgctxt "@item:inlistbox"
+msgid "Linear"
+msgstr "线性"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
-msgctxt "@label"
-msgid "Extruder"
-msgstr "挤出机"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:172
+msgctxt "@item:inlistbox"
+msgid "Translucency"
+msgstr "半透明"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
-msgctxt "@tooltip"
-msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
-msgstr "热端的目标温度。 热端将加热或冷却至此温度。 如果目标温度为 0，则热端加热将关闭。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:171
+msgctxt "@info:tooltip"
+msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
+msgstr "穿透 1 毫米厚的打印件的光线百分比。降低此值将增大图像暗区中的对比度并减小图像亮区中的对比度。"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
-msgctxt "@tooltip"
-msgid "The current temperature of this hotend."
-msgstr "该热端的当前温度。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:177
+msgctxt "@action:label"
+msgid "1mm Transmittance (%)"
+msgstr "1 毫米透射率 (%)"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
-msgctxt "@tooltip of temperature input"
-msgid "The temperature to pre-heat the hotend to."
-msgstr "热端的预热温度。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:195
+msgctxt "@info:tooltip"
+msgid "The amount of smoothing to apply to the image."
+msgstr "要应用到图像的平滑量。"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
-msgctxt "@button Cancel pre-heating"
-msgid "Cancel"
-msgstr "取消"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:200
+msgctxt "@action:label"
+msgid "Smoothing"
+msgstr "平滑"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
-msgctxt "@button"
-msgid "Pre-heat"
-msgstr "预热"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:227
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
+msgctxt "@action:button"
+msgid "OK"
+msgstr "确定"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
-msgctxt "@tooltip of pre-heat"
-msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
-msgstr "打印前请预热热端。您可以在热端加热时继续调整打印机，而不必等待热端加热完毕再做好打印准备。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+msgctxt "@title:tab"
+msgid "Printer"
+msgstr "打印机"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
-msgctxt "@tooltip"
-msgid "The colour of the material in this extruder."
-msgstr "该挤出机中材料的颜色。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
+msgctxt "@title:label"
+msgid "Nozzle Settings"
+msgstr "喷嘴设置"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
-msgctxt "@tooltip"
-msgid "The material in this extruder."
-msgstr "该挤出机中的材料。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
+msgctxt "@label"
+msgid "Nozzle size"
+msgstr "喷嘴孔径"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
-msgctxt "@tooltip"
-msgid "The nozzle inserted in this extruder."
-msgstr "该挤出机所使用的喷嘴。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
+msgctxt "@label"
+msgid "mm"
+msgstr "mm"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
-msgctxt "@info:status"
-msgid "The printer is not connected."
-msgstr "尚未连接到打印机。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
+msgctxt "@label"
+msgid "Compatible material diameter"
+msgstr "兼容的材料直径"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
 msgctxt "@label"
-msgid "Build plate"
-msgstr "打印平台"
+msgid "Nozzle offset X"
+msgstr "喷嘴偏移 X"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
-msgctxt "@tooltip"
-msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
-msgstr "热床的目标温度。热床将加热或冷却至此温度。若设置为 0，则不使用热床。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
+msgctxt "@label"
+msgid "Nozzle offset Y"
+msgstr "喷嘴偏移 Y"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
-msgctxt "@tooltip"
-msgid "The current temperature of the heated bed."
-msgstr "热床当前温度。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
+msgctxt "@label"
+msgid "Cooling Fan Number"
+msgstr "冷却风扇数量"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
-msgctxt "@tooltip of temperature input"
-msgid "The temperature to pre-heat the bed to."
-msgstr "热床的预热温度。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:162
+msgctxt "@title:label"
+msgid "Extruder Start G-code"
+msgstr "挤出机的开始 G-code"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
-msgctxt "@tooltip of pre-heat"
-msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
-msgstr "打印前请预热热床。您可以在热床加热时继续调整相关项，让您在准备打印时不必等待热床加热完毕。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:176
+msgctxt "@title:label"
+msgid "Extruder End G-code"
+msgstr "挤出机的结束 G-code"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
+msgctxt "@title:label"
+msgid "Printer Settings"
+msgstr "打印机设置"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
 msgctxt "@label"
-msgid "Printer control"
-msgstr "打印机控制"
+msgid "X (Width)"
+msgstr "X (宽度)"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
 msgctxt "@label"
-msgid "Jog Position"
-msgstr "垛齐位置"
+msgid "Y (Depth)"
+msgstr "Y (深度)"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
 msgctxt "@label"
-msgid "X/Y"
-msgstr "X/Y"
+msgid "Z (Height)"
+msgstr "Z (高度)"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
 msgctxt "@label"
-msgid "Z"
-msgstr "Z"
+msgid "Build plate shape"
+msgstr "打印平台形状"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
 msgctxt "@label"
-msgid "Jog Distance"
-msgstr "垛齐距离"
+msgid "Origin at center"
+msgstr "置中"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
 msgctxt "@label"
-msgid "Send G-code"
-msgstr "发送 G-code"
+msgid "Heated bed"
+msgstr "加热床"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
-msgctxt "@tooltip of G-code command input"
-msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
-msgstr "向连接的打印机发送自定义 G-code 命令。按“Enter”发送命令。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
+msgctxt "@label"
+msgid "Heated build volume"
+msgstr "加热的构建体积"
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:242
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
 msgctxt "@label"
-msgid "This package will be installed after restarting."
-msgstr "这个包将在重新启动后安装。"
+msgid "G-code flavor"
+msgstr "G-code 风格"
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:435
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:15
-msgctxt "@title:tab"
-msgid "General"
-msgstr "基本"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
+msgctxt "@title:label"
+msgid "Printhead Settings"
+msgstr "打印头设置"
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:438
-msgctxt "@title:tab"
-msgid "Settings"
-msgstr "设置"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
+msgctxt "@label"
+msgid "X min"
+msgstr "X 最小值"
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:440
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:16
-msgctxt "@title:tab"
-msgid "Printers"
-msgstr "打印机"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
+msgctxt "@label"
+msgid "Y min"
+msgstr "Y 最小值"
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:442
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:79
-msgctxt "@title:tab"
-msgid "Materials"
-msgstr "材料"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+msgctxt "@label"
+msgid "X max"
+msgstr "X 最大值"
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:444
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:34
-msgctxt "@title:tab"
-msgid "Profiles"
-msgstr "配置文件"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+msgctxt "@label"
+msgid "Y max"
+msgstr "Y 最大值"
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:563
-msgctxt "@title:window"
-msgid "Closing Cura"
-msgstr "关闭 Cura"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+msgctxt "@label"
+msgid "Gantry Height"
+msgstr "十字轴高度"
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:564
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:576
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
 msgctxt "@label"
-msgid "Are you sure you want to exit Cura?"
-msgstr "您确定要退出 Cura 吗？"
+msgid "Number of Extruders"
+msgstr "挤出机数目"
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:614
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
-msgctxt "@title:window"
-msgid "Open file(s)"
-msgstr "打开文件"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:339
+msgctxt "@label"
+msgid "Shared Heater"
+msgstr "共用加热器"
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:720
-msgctxt "@window:title"
-msgid "Install Package"
-msgstr "安装包"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:365
+msgctxt "@title:label"
+msgid "Start G-code"
+msgstr "开始 G-code"
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:728
-msgctxt "@title:window"
-msgid "Open File(s)"
-msgstr "打开文件"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:376
+msgctxt "@title:label"
+msgid "End G-code"
+msgstr "结束 G-code"
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:731
-msgctxt "@text:window"
-msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
-msgstr "我们已经在您选择的文件中找到一个或多个 G-Code 文件。您一次只能打开一个 G-Code 文件。若需打开 G-Code 文件，请仅选择一个。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:100
+msgctxt "@info"
+msgid ""
+"Please make sure your printer has a connection:\n"
+"- Check if the printer is turned on.\n"
+"- Check if the printer is connected to the network.\n"
+"- Check if you are signed in to discover cloud-connected printers."
+msgstr ""
+"请确保您的打印机已连接：\n"
+"- 检查打印机是否已启动。\n"
+"- 检查打印机是否连接至网络。\n"
+"- 检查您是否已登录查找云连接的打印机。"
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:834
-msgctxt "@title:window"
-msgid "Add Printer"
-msgstr "新增打印机"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:117
+msgctxt "@info"
+msgid "Please connect your printer to the network."
+msgstr "请将打印机连接到网络。"
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:842
-msgctxt "@title:window"
-msgid "What's New"
-msgstr "新增功能"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:156
+msgctxt "@label link to technical assistance"
+msgid "View user manuals online"
+msgstr "查看联机用户手册"
 
-#: /home/ruben/Projects/Cura/resources/qml/JobSpecs.qml:99
-msgctxt "@text Print job name"
-msgid "Untitled"
-msgstr "未命名"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:45
+msgctxt "@label"
+msgid "Mesh Type"
+msgstr "网格类型"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintMonitor.qml:140
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:75
 msgctxt "@label"
-msgid "Active print"
-msgstr "正在打印"
+msgid "Normal model"
+msgstr "正常模式"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintMonitor.qml:148
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:87
 msgctxt "@label"
-msgid "Job Name"
-msgstr "作业名"
+msgid "Print as support"
+msgstr "打印为支撑"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintMonitor.qml:156
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:99
 msgctxt "@label"
-msgid "Printing Time"
-msgstr "打印时间"
+msgid "Modify settings for overlaps"
+msgstr "修改重叠设置"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintMonitor.qml:164
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:111
 msgctxt "@label"
-msgid "Estimated time left"
-msgstr "预计剩余时间"
+msgid "Don't support overlaps"
+msgstr "不支持重叠"
 
-#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
-msgctxt "@label:PrintjobStatus"
-msgid "Slicing..."
-msgstr "正在切片..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:142
+msgctxt "@item:inlistbox"
+msgid "Infill mesh only"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
-msgctxt "@label:PrintjobStatus"
-msgid "Unable to slice"
-msgstr "无法切片"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:143
+msgctxt "@item:inlistbox"
+msgid "Cutting mesh"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
-msgctxt "@button"
-msgid "Processing"
-msgstr "正在处理中"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:373
+msgctxt "@action:button"
+msgid "Select settings"
+msgstr "选择设置"
 
-#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
-msgctxt "@button"
-msgid "Slice"
-msgstr "切片"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
+msgctxt "@title:window"
+msgid "Select Settings to Customize for this model"
+msgstr "选择对此模型的自定义设置"
 
-#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
-msgctxt "@label"
-msgid "Start the slicing process"
-msgstr "开始切片流程"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
+msgctxt "@label:textbox"
+msgid "Filter..."
+msgstr "筛选..."
 
-#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
-msgctxt "@button"
-msgid "Cancel"
-msgstr "取消"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:70
+msgctxt "@label:checkbox"
+msgid "Show all"
+msgstr "显示全部"
 
-#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
-msgctxt "@label"
-msgid "Time estimation"
-msgstr "预计时间"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
+msgctxt "@title:window"
+msgid "Post Processing Plugin"
+msgstr "后期处理插件"
 
-#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
 msgctxt "@label"
-msgid "Material estimation"
-msgstr "预计材料"
-
-#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
-msgctxt "@label m for meter"
-msgid "%1m"
-msgstr "%1m"
-
-#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
-msgctxt "@label g for grams"
-msgid "%1g"
-msgstr "%1g"
+msgid "Post Processing Scripts"
+msgstr "后期处理脚本"
 
-#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
-msgctxt "@label"
-msgid "No time estimation available"
-msgstr "无可用时间估计"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
+msgctxt "@action"
+msgid "Add a script"
+msgstr "添加一个脚本"
 
-#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
 msgctxt "@label"
-msgid "No cost estimation available"
-msgstr "无可用成本估计"
-
-#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
-msgctxt "@button"
-msgid "Preview"
-msgstr "预览"
+msgid "Settings"
+msgstr "设置"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ContextMenu.qml:27
-msgctxt "@label"
-msgid "Print Selected Model With:"
-msgid_plural "Print Selected Models With:"
-msgstr[0] "打印所选模型："
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499
+msgctxt "@info:tooltip"
+msgid "Change active post-processing scripts."
+msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ContextMenu.qml:116
-msgctxt "@title:window"
-msgid "Multiply Selected Model"
-msgid_plural "Multiply Selected Models"
-msgstr[0] "复制所选模型"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503
+msgctxt "@info:tooltip"
+msgid "The following script is active:"
+msgid_plural "The following scripts are active:"
+msgstr[0] ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ContextMenu.qml:141
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
 msgctxt "@label"
-msgid "Number of Copies"
-msgstr "复制个数"
-
-#: /home/ruben/Projects/Cura/resources/qml/Menus/FileMenu.qml:13
-#: /home/ruben/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
-msgctxt "@title:menu menubar:toplevel"
-msgid "&File"
-msgstr "文件(&F)"
+msgid "Color scheme"
+msgstr "颜色方案"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/FileMenu.qml:33
-msgctxt "@title:menu menubar:file"
-msgid "&Save..."
-msgstr "保存(&S)..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:107
+msgctxt "@label:listbox"
+msgid "Material Color"
+msgstr "材料颜色"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/FileMenu.qml:54
-msgctxt "@title:menu menubar:file"
-msgid "&Export..."
-msgstr "导出(&E)..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:111
+msgctxt "@label:listbox"
+msgid "Line Type"
+msgstr "走线类型"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/FileMenu.qml:65
-msgctxt "@action:inmenu menubar:file"
-msgid "Export Selection..."
-msgstr "导出选择..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:115
+msgctxt "@label:listbox"
+msgid "Speed"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open &Recent"
-msgstr "打开最近使用过的文件(&R)"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:119
+msgctxt "@label:listbox"
+msgid "Layer thickness"
+msgstr "层厚度"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:25
-msgctxt "@label:category menu label"
-msgid "Network enabled printers"
-msgstr "网络打印机"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:156
+msgctxt "@label"
+msgid "Compatibility Mode"
+msgstr "兼容模式"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:42
-msgctxt "@label:category menu label"
-msgid "Local printers"
-msgstr "本地打印机"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:230
+msgctxt "@label"
+msgid "Travels"
+msgstr "空驶"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
-msgctxt "@header"
-msgid "Configurations"
-msgstr "配置"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:236
+msgctxt "@label"
+msgid "Helpers"
+msgstr "打印辅助结构"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
-msgctxt "@header"
-msgid "Custom"
-msgstr "自定义"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:242
+msgctxt "@label"
+msgid "Shell"
+msgstr "外壳"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:248
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
 msgctxt "@label"
-msgid "Printer"
-msgstr "打印机"
+msgid "Infill"
+msgstr "填充"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:298
 msgctxt "@label"
-msgid "Enabled"
-msgstr "已启用"
+msgid "Only Show Top Layers"
+msgstr "只显示顶层"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:251
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:308
 msgctxt "@label"
-msgid "Material"
-msgstr "材料"
+msgid "Show 5 Detailed Layers On Top"
+msgstr "在顶部显示 5 层打印细节"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:378
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322
 msgctxt "@label"
-msgid "Use glue for better adhesion with this material combination."
-msgstr "用胶粘和此材料组合以产生更好的附着。"
+msgid "Top / Bottom"
+msgstr "顶 / 底层"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:326
 msgctxt "@label"
-msgid "Loading available configurations from the printer..."
-msgstr "正在从打印机加载可用配置..."
+msgid "Inner Wall"
+msgstr "内壁"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:384
 msgctxt "@label"
-msgid "The configurations are not available because the printer is disconnected."
-msgstr "该配置不可用，因为打印机已断开连接。"
+msgid "min"
+msgstr "最小"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:433
 msgctxt "@label"
-msgid "Select configuration"
-msgstr "选择配置"
+msgid "max"
+msgstr "最大"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+msgctxt "@title:window"
+msgid "More information on anonymous data collection"
+msgstr "更多关于匿名数据收集的信息"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
+msgctxt "@text:window"
+msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
+msgstr "为了改善打印质量和用户体验，Ultimaker Cura 会收集匿名数据。以下是所有数据分享的示例："
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
+msgctxt "@text:window"
+msgid "I don't want to send anonymous data"
+msgstr "我不想发送匿名数据"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
+msgctxt "@text:window"
+msgid "Allow sending anonymous data"
+msgstr "允许发送匿名数据"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/RatingWidget.qml:54
 msgctxt "@label"
-msgid "Configurations"
-msgstr "配置"
+msgid "You need to login first before you can rate"
+msgstr "您需要登录才能评分"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:128
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/RatingWidget.qml:54
 msgctxt "@label"
-msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
-msgstr "此配置不可用，因为 %1 未被识别。请访问 %2 以下载正确的材料配置文件。"
+msgid "You need to install the package before you can rate"
+msgstr "您需要安装程序包才能评分"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:129
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/SmallRatingWidget.qml:27
 msgctxt "@label"
-msgid "Marketplace"
-msgstr "市场"
+msgid "ratings"
+msgstr "评分"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:13
-#: /home/ruben/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:50
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Settings"
-msgstr "设置(&S)"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
+msgctxt "@action:button"
+msgid "Back"
+msgstr "背部"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:15
-msgctxt "@title:menu menubar:settings"
-msgid "&Printer"
-msgstr "打印机（&P）"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
+msgctxt "@label"
+msgid "Compatibility"
+msgstr "兼容性"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:27
-msgctxt "@title:menu"
-msgid "&Material"
-msgstr "材料（&M）"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
+msgctxt "@label:table_header"
+msgid "Machine"
+msgstr "机器"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:36
-msgctxt "@action:inmenu"
-msgid "Set as Active Extruder"
-msgstr "设为主要挤出机"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
+msgctxt "@label:table_header"
+msgid "Build Plate"
+msgstr "打印平台"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:42
-msgctxt "@action:inmenu"
-msgid "Enable Extruder"
-msgstr "启用挤出机"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
+msgctxt "@label:table_header"
+msgid "Support"
+msgstr "支持"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:49
-msgctxt "@action:inmenu"
-msgid "Disable Extruder"
-msgstr "禁用挤出机"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
+msgctxt "@label:table_header"
+msgid "Quality"
+msgstr "质量"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:13
-msgctxt "@label:category menu label"
-msgid "Material"
-msgstr "材料"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
+msgctxt "@action:label"
+msgid "Technical Data Sheet"
+msgstr "技术数据表"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:54
-msgctxt "@label:category menu label"
-msgid "Favorites"
-msgstr "收藏"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
+msgctxt "@action:label"
+msgid "Safety Data Sheet"
+msgstr "安全数据表"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:79
-msgctxt "@label:category menu label"
-msgid "Generic"
-msgstr "通用"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
+msgctxt "@action:label"
+msgid "Printing Guidelines"
+msgstr "打印指南"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ViewMenu.qml:12
-#: /home/ruben/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:48
-msgctxt "@title:menu menubar:toplevel"
-msgid "&View"
-msgstr "视图(&V)"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
+msgctxt "@action:label"
+msgid "Website"
+msgstr "网站"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ViewMenu.qml:19
-msgctxt "@action:inmenu menubar:view"
-msgid "&Camera position"
-msgstr "摄像头位置(&C)"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
+msgctxt "@action:button"
+msgid "Installed"
+msgstr "已安装"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ViewMenu.qml:44
-msgctxt "@action:inmenu menubar:view"
-msgid "Camera view"
-msgstr "摄像头视图"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Log in</a> is required to install or update"
+msgstr "安装或更新需要<a href='%1'>登录</a>"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ViewMenu.qml:47
-msgctxt "@action:inmenu menubar:view"
-msgid "Perspective"
-msgstr "透视"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Buy material spools</a>"
+msgstr "<a href='%1'>购买材料线轴</a>"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ViewMenu.qml:59
-msgctxt "@action:inmenu menubar:view"
-msgid "Orthographic"
-msgstr "正交"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+msgctxt "@action:button"
+msgid "Update"
+msgstr "更新"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ViewMenu.qml:80
-msgctxt "@action:inmenu menubar:view"
-msgid "&Build plate"
-msgstr "打印平台(&B)"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+msgctxt "@action:button"
+msgid "Updating"
+msgstr "更新"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
-msgctxt "@action:inmenu"
-msgid "Visible Settings"
-msgstr "可见设置"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+msgctxt "@action:button"
+msgid "Updated"
+msgstr "更新"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
-msgctxt "@action:inmenu"
-msgid "Collapse All Categories"
-msgstr "折叠所有类别"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
+msgctxt "@label"
+msgid "Featured"
+msgstr "精选"
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
-msgctxt "@action:inmenu"
-msgid "Manage Setting Visibility..."
-msgstr "管理设置可见性..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
+msgctxt "@info:tooltip"
+msgid "Go to Web Marketplace"
+msgstr "前往网上市场"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:61
-msgctxt "@info:status"
-msgid "Calculated"
-msgstr "已计算"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
+msgctxt "@label"
+msgid "Search materials"
+msgstr "搜索材料"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:75
-msgctxt "@title:column"
-msgid "Setting"
-msgstr "设置"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
+msgctxt "@info"
+msgid "You will need to restart Cura before changes in packages have effect."
+msgstr "在包装更改生效之前，您需要重新启动Cura。"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:82
-msgctxt "@title:column"
-msgid "Profile"
-msgstr "配置文件"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
+msgctxt "@info:button, %1 is the application name"
+msgid "Quit %1"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:89
-msgctxt "@title:column"
-msgid "Current"
-msgstr "当前"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:34
+msgctxt "@title:tab"
+msgid "Plugins"
+msgstr "插件"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:97
-msgctxt "@title:column"
-msgid "Unit"
-msgstr "单位"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:79
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:442
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
+msgctxt "@title:tab"
+msgid "Materials"
+msgstr "材料"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
 msgctxt "@title:tab"
-msgid "Setting Visibility"
-msgstr "设置可见性"
+msgid "Installed"
+msgstr "安装"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
-msgctxt "@label:textbox"
-msgid "Check all"
-msgstr "全部勾选"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
+msgctxt "@label"
+msgid "Will install upon restarting"
+msgstr "将安装后重新启动"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
-#: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
-msgctxt "@label:textbox"
-msgid "Filter..."
-msgstr "筛选..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Log in</a> is required to update"
+msgstr "更新需要<a href='%1'>登录</a>"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+msgctxt "@action:button"
+msgid "Downgrade"
+msgstr "降级"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+msgctxt "@action:button"
+msgid "Uninstall"
+msgstr "卸载"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
+msgctxt "@action:button"
+msgid "Install"
+msgstr "安装"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
 msgctxt "@title"
-msgid "Information"
-msgstr "信息"
+msgid "Changes from your account"
+msgstr "您的帐户有更改"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
-msgctxt "@title:window"
-msgid "Confirm Diameter Change"
-msgstr "确认直径更改"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+msgctxt "@button"
+msgid "Dismiss"
+msgstr "解除"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
-msgctxt "@label (%1 is a number)"
-msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
-msgstr "新的灯丝直径被设置为%1毫米，这与当前的挤出机不兼容。你想继续吗？"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
+msgctxt "@button"
+msgid "Next"
+msgstr "下一步"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
 msgctxt "@label"
-msgid "Display Name"
-msgstr "显示名称"
+msgid "The following packages will be added:"
+msgstr "将添加以下程序包："
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
 msgctxt "@label"
-msgid "Brand"
-msgstr "品牌"
+msgid "The following packages can not be installed because of an incompatible Cura version:"
+msgstr "由于 Cura 版本不兼容，无法安装以下程序包："
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
-msgctxt "@label"
-msgid "Material Type"
-msgstr "材料类型"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
+msgctxt "@title:window"
+msgid "Confirm uninstall"
+msgstr "确认卸载"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
-msgctxt "@label"
-msgid "Color"
-msgstr "颜色"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
+msgctxt "@text:window"
+msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
+msgstr "您正在卸载仍在使用的材料和/或配置文件。确认会将以下材料/配置文件重置为默认值。"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
-msgctxt "@label"
-msgid "Properties"
-msgstr "属性"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
+msgctxt "@text:window"
+msgid "Materials"
+msgstr "材料"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
-msgctxt "@label"
-msgid "Density"
-msgstr "密度"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
+msgctxt "@text:window"
+msgid "Profiles"
+msgstr "配置文件"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
-msgctxt "@label"
-msgid "Diameter"
-msgstr "直径"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
+msgctxt "@action:button"
+msgid "Confirm"
+msgstr "确认"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
 msgctxt "@label"
-msgid "Filament Cost"
-msgstr "耗材成本"
+msgid "You need to accept the license to install the package"
+msgstr "需要接受许可证才能安装该程序包"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:93
 msgctxt "@label"
-msgid "Filament weight"
-msgstr "耗材重量"
+msgid "Website"
+msgstr "网站"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:100
 msgctxt "@label"
-msgid "Filament length"
-msgstr "耗材长度"
+msgid "Email"
+msgstr "电子邮件"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:97
 msgctxt "@label"
-msgid "Cost per Meter"
-msgstr "每米成本"
+msgid "Your rating"
+msgstr "您的评分"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:105
 msgctxt "@label"
-msgid "This material is linked to %1 and shares some of its properties."
-msgstr "此材料与 %1 相关联，并共享其某些属性。"
+msgid "Version"
+msgstr "版本"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:112
 msgctxt "@label"
-msgid "Unlink Material"
-msgstr "解绑材料"
+msgid "Last updated"
+msgstr "更新日期"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:119
 msgctxt "@label"
-msgid "Description"
-msgstr "描述"
+msgid "Author"
+msgstr "作者"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:126
 msgctxt "@label"
-msgid "Adhesion Information"
-msgstr "粘附信息"
+msgid "Downloads"
+msgstr "下载项"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
 msgctxt "@label"
-msgid "Print settings"
-msgstr "打印设置"
-
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:84
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:40
-msgctxt "@action:button"
-msgid "Activate"
-msgstr "激活"
-
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
-msgctxt "@action:button"
-msgid "Create"
-msgstr "创建"
-
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
-msgctxt "@action:button"
-msgid "Duplicate"
-msgstr "复制"
-
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:138
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:55
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
-msgctxt "@action:button"
-msgid "Remove"
-msgstr "删除"
-
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:167
-msgctxt "@action:button"
-msgid "Import"
-msgstr "导入"
-
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:179
-msgctxt "@action:button"
-msgid "Export"
-msgstr "导出"
-
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
-msgctxt "@action:label"
-msgid "Printer"
-msgstr "打印机"
-
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:274
-msgctxt "@title:window"
-msgid "Confirm Remove"
-msgstr "确认删除"
+msgid "Community Contributions"
+msgstr "社区贡献"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:275
-msgctxt "@label (%1 is object name)"
-msgid "Are you sure you wish to remove %1? This cannot be undone!"
-msgstr "您确认要删除 %1？该操作无法恢复！"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+msgctxt "@label"
+msgid "Community Plugins"
+msgstr "社区插件"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
-msgctxt "@title:window"
-msgid "Import Material"
-msgstr "导入配置"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+msgctxt "@label"
+msgid "Generic Materials"
+msgstr "通用材料"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
-msgstr "无法导入材料 <filename>%1</filename>： <message>%2</message>"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
+msgctxt "@info"
+msgid "Could not connect to the Cura Package database. Please check your connection."
+msgstr "无法连接到Cura包数据库。请检查您的连接。"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully imported material <filename>%1</filename>"
-msgstr "成功导入材料 <filename>%1</filename>"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:16
+msgctxt "@info"
+msgid "Fetching packages..."
+msgstr "获取包..."
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
-msgctxt "@title:window"
-msgid "Export Material"
-msgstr "导出材料"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:31
+msgctxt "@description"
+msgid "Get plugins and materials verified by Ultimaker"
+msgstr "获取经过 Ultimaker 验证的插件和材料"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
-msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
-msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
-msgstr "无法导出材料至 <filename>%1</filename>： <message>%2</message>"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
+msgctxt "@title"
+msgid "Marketplace"
+msgstr "市场"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully exported material to <filename>%1</filename>"
-msgstr "成功导出材料至： <filename>%1</filename>"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
+msgctxt "@title"
+msgid "Build Plate Leveling"
+msgstr "打印平台调平"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:104
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
 msgctxt "@label"
-msgid "Create"
-msgstr "创建"
+msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
+msgstr "为了确保打印质量出色，您现在可以开始调整您的打印平台。当您点击「移动到下一个位置」时，喷嘴将移动到可以调节的不同位置。"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
 msgctxt "@label"
-msgid "Duplicate"
-msgstr "复制"
+msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
+msgstr "在打印头停止的每一个位置下方插入一张纸，并调整平台高度。当纸张恰好被喷嘴的尖端轻微压住时，此时打印平台的高度已被正确校准。"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:152
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:63
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
 msgctxt "@action:button"
-msgid "Rename"
-msgstr "重命名"
-
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:202
-msgctxt "@title:window"
-msgid "Create Profile"
-msgstr "创建配置文件"
+msgid "Start Build Plate Leveling"
+msgstr "开始进行打印平台调平"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:204
-msgctxt "@info"
-msgid "Please provide a name for this profile."
-msgstr "请为此配置文件提供名称。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
+msgctxt "@action:button"
+msgid "Move to Next Position"
+msgstr "移动到下一个位置"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:260
-msgctxt "@title:window"
-msgid "Duplicate Profile"
-msgstr "复制配置文件"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
+msgctxt "@label"
+msgid "Please select any upgrades made to this Ultimaker Original"
+msgstr "请选择适用于 Ultimaker Original 的升级文件"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:291
-msgctxt "@title:window"
-msgid "Rename Profile"
-msgstr "重命名配置文件"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
+msgctxt "@label"
+msgid "Heated Build Plate (official kit or self-built)"
+msgstr "热床（官方版本或自制）"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:304
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
 msgctxt "@title:window"
-msgid "Import Profile"
-msgstr "导入配置文件"
+msgid "Connect to Networked Printer"
+msgstr "连接到网络打印机"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:333
-msgctxt "@title:window"
-msgid "Export Profile"
-msgstr "导出配置文件"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+msgctxt "@label"
+msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
+msgstr "欲通过网络向打印机发送打印请求，请确保您的打印机已通过网线或 WIFI 连接至网络。若不能连接 Cura 与打印机，亦可通过使用 USB 设备将 G-code 文件传输到打印机。"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:396
-msgctxt "@label %1 is printer name"
-msgid "Printer: %1"
-msgstr "打印机：%1"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+msgctxt "@label"
+msgid "Select your printer from the list below:"
+msgstr "请从以下列表中选择您的打印机："
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:554
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
 msgctxt "@action:button"
-msgid "Update profile with current settings/overrides"
-msgstr "使用当前设置 / 重写值更新配置文件"
+msgid "Edit"
+msgstr "编辑"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:561
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:258
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:55
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:138
 msgctxt "@action:button"
-msgid "Discard current changes"
-msgstr "舍弃当前更改"
-
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:580
-msgctxt "@action:label"
-msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
-msgstr "此配置文件使用打印机指定的默认值，因此在下面的列表中没有此设置项。"
-
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:588
-msgctxt "@action:label"
-msgid "Your current settings match the selected profile."
-msgstr "您当前的设置与选定的配置文件相匹配。"
+msgid "Remove"
+msgstr "删除"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:606
-msgctxt "@title:tab"
-msgid "Global Settings"
-msgstr "全局设置"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
+msgctxt "@action:button"
+msgid "Refresh"
+msgstr "刷新"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:132
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
 msgctxt "@label"
-msgid "Interface"
-msgstr "接口"
+msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
+msgstr "如果您的打印机未列出，请阅读<a href='%1'>网络打印故障排除指南</a>"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:143
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
 msgctxt "@label"
-msgid "Language:"
-msgstr "语言："
+msgid "Type"
+msgstr "类型"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:210
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
 msgctxt "@label"
-msgid "Currency:"
-msgstr "币种："
+msgid "Firmware version"
+msgstr "固件版本"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:223
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
 msgctxt "@label"
-msgid "Theme:"
-msgstr "主题："
+msgid "Address"
+msgstr "地址"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:279
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
 msgctxt "@label"
-msgid "You will need to restart the application for these changes to have effect."
-msgstr "需重新启动 Cura，新的设置才能生效。"
-
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:296
-msgctxt "@info:tooltip"
-msgid "Slice automatically when changing settings."
-msgstr "当设置被更改时自动进行切片。"
-
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:304
-msgctxt "@option:check"
-msgid "Slice automatically"
-msgstr "自动切片"
+msgid "This printer is not set up to host a group of printers."
+msgstr "这台打印机未设置为运行一组打印机。"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:318
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
 msgctxt "@label"
-msgid "Viewport behavior"
-msgstr "视区行为"
-
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:326
-msgctxt "@info:tooltip"
-msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly."
-msgstr "以红色突出显示模型需要增加支撑结构的区域。没有支撑，这些区域将无法正确打印。"
-
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:335
-msgctxt "@option:check"
-msgid "Display overhang"
-msgstr "显示悬垂（Overhang）"
+msgid "This printer is the host for a group of %1 printers."
+msgstr "这台打印机是一组共 %1 台打印机的主机。"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:343
-msgctxt "@info:tooltip"
-msgid "Moves the camera so the model is in the center of the view when a model is selected"
-msgstr "当模型被选中时，视角将自动调整到最合适的观察位置（模型处于正中央）"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
+msgctxt "@label"
+msgid "The printer at this address has not yet responded."
+msgstr "该网络地址的打印机尚未响应。"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:348
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
 msgctxt "@action:button"
-msgid "Center camera when item is selected"
-msgstr "当项目被选中时，自动对中视角"
+msgid "Connect"
+msgstr "连接"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:358
-msgctxt "@info:tooltip"
-msgid "Should the default zoom behavior of cura be inverted?"
-msgstr "需要令 Cura 的默认缩放操作反转吗？"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
+msgctxt "@title:window"
+msgid "Invalid IP address"
+msgstr "IP 地址无效"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:363
-msgctxt "@action:button"
-msgid "Invert the direction of camera zoom."
-msgstr "反转视角变焦方向。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
+msgctxt "@text"
+msgid "Please enter a valid IP address."
+msgstr "请输入有效的 IP 地址。"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:379
-msgctxt "@info:tooltip"
-msgid "Should zooming move in the direction of the mouse?"
-msgstr "是否跟随鼠标方向进行缩放？"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
+msgctxt "@title:window"
+msgid "Printer Address"
+msgstr "打印机网络地址"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:379
-msgctxt "@info:tooltip"
-msgid "Zooming towards the mouse is not supported in the orthographic perspective."
-msgstr "正交透视不支持通过鼠标进行缩放。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
+msgctxt "@label"
+msgid "Enter the IP address of your printer on the network."
+msgstr "请输入打印机在网络上的 IP 地址。"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:384
-msgctxt "@action:button"
-msgid "Zoom toward mouse direction"
-msgstr "跟随鼠标方向缩放"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
+msgctxt "@title:window"
+msgid "Configuration Changes"
+msgstr "配置更改"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:410
-msgctxt "@info:tooltip"
-msgid "Should models on the platform be moved so that they no longer intersect?"
-msgstr "需要移动平台上的模型，使它们不再相交吗？"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+msgctxt "@action:button"
+msgid "Override"
+msgstr "覆盖"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:415
-msgctxt "@option:check"
-msgid "Ensure models are kept apart"
-msgstr "确保每个模型都保持分离"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
+msgctxt "@label"
+msgid "The assigned printer, %1, requires the following configuration change:"
+msgid_plural "The assigned printer, %1, requires the following configuration changes:"
+msgstr[0] "分配的打印机 %1 需要以下配置更改："
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:424
-msgctxt "@info:tooltip"
-msgid "Should models on the platform be moved down to touch the build plate?"
-msgstr "需要转动模型，使它们接触打印平台吗？"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
+msgctxt "@label"
+msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
+msgstr "已向打印机 %1 分配作业，但作业包含未知的材料配置。"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:429
-msgctxt "@option:check"
-msgid "Automatically drop models to the build plate"
-msgstr "自动下降模型到打印平台"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
+msgctxt "@label"
+msgid "Change material %1 from %2 to %3."
+msgstr "将材料 %1 从 %2 更改为 %3。"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:441
-msgctxt "@info:tooltip"
-msgid "Show caution message in g-code reader."
-msgstr "在 G-code 读取器中显示警告信息。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
+msgctxt "@label"
+msgid "Load %3 as material %1 (This cannot be overridden)."
+msgstr "将 %3 作为材料 %1 进行加载（此操作无法覆盖）。"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:450
-msgctxt "@option:check"
-msgid "Caution message in g-code reader"
-msgstr "G-code 读取器中的警告信息"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
+msgctxt "@label"
+msgid "Change print core %1 from %2 to %3."
+msgstr "将 Print Core %1 从 %2 更改为 %3。"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:458
-msgctxt "@info:tooltip"
-msgid "Should layer be forced into compatibility mode?"
-msgstr "层视图要强制进入兼容模式吗？"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
+msgctxt "@label"
+msgid "Change build plate to %1 (This cannot be overridden)."
+msgstr "将打印平台更改为 %1（此操作无法覆盖）。"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:463
-msgctxt "@option:check"
-msgid "Force layer view compatibility mode (restart required)"
-msgstr "强制层视图兼容模式（需要重新启动）"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
+msgctxt "@label"
+msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
+msgstr "覆盖将使用包含现有打印机配置的指定设置。这可能会导致打印失败。"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:473
-msgctxt "@info:tooltip"
-msgid "Should Cura open at the location it was closed?"
-msgstr "Cura 是否应该在关闭的位置打开？"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:192
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
+msgctxt "@label"
+msgid "Glass"
+msgstr "玻璃"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:478
-msgctxt "@option:check"
-msgid "Restore window position on start"
-msgstr "恢复初始窗口位置"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
+msgctxt "@label"
+msgid "Aluminum"
+msgstr "铝"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:488
-msgctxt "@info:tooltip"
-msgid "What type of camera rendering should be used?"
-msgstr "应使用哪种类型的摄像头进行渲染？"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
+msgctxt "@label"
+msgid "Move to top"
+msgstr "移至顶部"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:495
-msgctxt "@window:text"
-msgid "Camera rendering:"
-msgstr "摄像头渲染："
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
+msgctxt "@label"
+msgid "Delete"
+msgstr "删除"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:506
-msgid "Perspective"
-msgstr "透视"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:289
+msgctxt "@label"
+msgid "Resume"
+msgstr "恢复"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:507
-msgid "Orthographic"
-msgstr "正交"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
+msgctxt "@label"
+msgid "Pausing..."
+msgstr "正在暂停..."
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:538
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
 msgctxt "@label"
-msgid "Opening and saving files"
-msgstr "打开并保存文件"
+msgid "Resuming..."
+msgstr "正在恢复..."
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:545
-msgctxt "@info:tooltip"
-msgid "Should models be scaled to the build volume if they are too large?"
-msgstr "当模型的尺寸过大时，是否将模型自动缩小至成形空间体积？"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:284
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:293
+msgctxt "@label"
+msgid "Pause"
+msgstr "暂停"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:550
-msgctxt "@option:check"
-msgid "Scale large models"
-msgstr "缩小过大模型"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+msgctxt "@label"
+msgid "Aborting..."
+msgstr "正在中止..."
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:560
-msgctxt "@info:tooltip"
-msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?"
-msgstr "当模型以米而不是毫米为单位时，模型可能会在打印平台中显得非常小。在此情况下是否进行放大？"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+msgctxt "@label"
+msgid "Abort"
+msgstr "中止"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:565
-msgctxt "@option:check"
-msgid "Scale extremely small models"
-msgstr "放大过小模型"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
+msgctxt "@label %1 is the name of a print job."
+msgid "Are you sure you want to move %1 to the top of the queue?"
+msgstr "您确定要将 %1 移至队列顶部吗？"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:575
-msgctxt "@info:tooltip"
-msgid "Should models be selected after they are loaded?"
-msgstr "模型是否应该在加载后被选中？"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
+msgctxt "@window:title"
+msgid "Move print job to top"
+msgstr "将打印作业移至顶部"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:580
-msgctxt "@option:check"
-msgid "Select models when loaded"
-msgstr "选择模型时加载"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
+msgctxt "@label %1 is the name of a print job."
+msgid "Are you sure you want to delete %1?"
+msgstr "您确定要删除 %1 吗？"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:590
-msgctxt "@info:tooltip"
-msgid "Should a prefix based on the printer name be added to the print job name automatically?"
-msgstr "打印机名是否自动作为打印作业名称的前缀？"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
+msgctxt "@window:title"
+msgid "Delete print job"
+msgstr "删除打印作业"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:595
-msgctxt "@option:check"
-msgid "Add machine prefix to job name"
-msgstr "将机器前缀添加到作业名称中"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
+msgctxt "@label %1 is the name of a print job."
+msgid "Are you sure you want to abort %1?"
+msgstr "您确定要中止 %1 吗？"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:605
-msgctxt "@info:tooltip"
-msgid "Should a summary be shown when saving a project file?"
-msgstr "保存项目文件时是否显示摘要？"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:335
+msgctxt "@window:title"
+msgid "Abort print"
+msgstr "中止打印"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:609
-msgctxt "@option:check"
-msgid "Show summary dialog when saving project"
-msgstr "保存项目时显示摘要对话框"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:155
+msgctxt "@label link to Connect and Cloud interfaces"
+msgid "Manage printer"
+msgstr "管理打印机"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:619
-msgctxt "@info:tooltip"
-msgid "Default behavior when opening a project file"
-msgstr "打开项目文件时的默认行为"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:256
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:514
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
+msgctxt "@info"
+msgid "Please update your printer's firmware to manage the queue remotely."
+msgstr "请及时更新打印机固件以远程管理打印队列。"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:627
-msgctxt "@window:text"
-msgid "Default behavior when opening a project file: "
-msgstr "打开项目文件时的默认行为： "
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:289
+msgctxt "@info"
+msgid "The webcam is not available because you are monitoring a cloud printer."
+msgstr "网络摄像头不可用，因为您正在监控云打印机。"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:641
-msgctxt "@option:openProject"
-msgid "Always ask me this"
-msgstr "总是询问"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
+msgctxt "@label:status"
+msgid "Loading..."
+msgstr "正在加载..."
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:642
-msgctxt "@option:openProject"
-msgid "Always open as a project"
-msgstr "始终作为一个项目打开"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
+msgctxt "@label:status"
+msgid "Unavailable"
+msgstr "不可用"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:643
-msgctxt "@option:openProject"
-msgid "Always import models"
-msgstr "始终导入模型"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
+msgctxt "@label:status"
+msgid "Unreachable"
+msgstr "无法连接"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:679
-msgctxt "@info:tooltip"
-msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
-msgstr "当您对配置文件进行更改并切换到其他配置文件时将显示一个对话框，询问您是否要保留修改。您也可以选择一个默认行为并令其不再显示该对话框。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
+msgctxt "@label:status"
+msgid "Idle"
+msgstr "空闲"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:688
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:401
 msgctxt "@label"
-msgid "Profiles"
-msgstr "配置文件"
-
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:693
-msgctxt "@window:text"
-msgid "Default behavior for changed setting values when switching to a different profile: "
-msgstr "切换到不同配置文件时对设置值更改的默认操作： "
-
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:707
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:156
-msgctxt "@option:discardOrKeep"
-msgid "Always ask me this"
-msgstr "总是询问"
-
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:708
-msgctxt "@option:discardOrKeep"
-msgid "Always discard changed settings"
-msgstr "总是舍失更改的设置"
-
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:709
-msgctxt "@option:discardOrKeep"
-msgid "Always transfer changed settings to new profile"
-msgstr "总是将更改的设置传输至新配置文件"
+msgid "Untitled"
+msgstr "未命名"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:743
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:422
 msgctxt "@label"
-msgid "Privacy"
-msgstr "隐私"
-
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:750
-msgctxt "@info:tooltip"
-msgid "Should Cura check for updates when the program is started?"
-msgstr "当 Cura 启动时，是否自动检查更新？"
-
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:755
-msgctxt "@option:check"
-msgid "Check for updates on start"
-msgstr "启动时检查更新"
-
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:765
-msgctxt "@info:tooltip"
-msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored."
-msgstr "您愿意将关于您的打印数据以匿名形式发送到 Ultimaker 吗？注意：我们不会记录/发送任何模型、IP 地址或其他私人数据。"
+msgid "Anonymous"
+msgstr "匿名"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:770
-msgctxt "@option:check"
-msgid "Send (anonymous) print information"
-msgstr "（匿名）发送打印信息"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:449
+msgctxt "@label:status"
+msgid "Requires configuration changes"
+msgstr "需要更改配置"
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:779
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:487
 msgctxt "@action:button"
-msgid "More information"
+msgid "Details"
 msgstr "详细信息"
 
-#: /home/ruben/Projects/Cura/resources/qml/ViewsSelector.qml:50
-msgctxt "@label"
-msgid "View type"
-msgstr "查看类型"
-
-#: /home/ruben/Projects/Cura/resources/qml/ObjectSelector.qml:59
-msgctxt "@label"
-msgid "Object list"
-msgstr "对象列表"
-
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:42
-msgctxt "@label"
-msgid "There is no printer found over your network."
-msgstr "未找到网络内打印机。"
-
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:180
-msgctxt "@label"
-msgid "Refresh"
-msgstr "刷新"
-
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:191
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
 msgctxt "@label"
-msgid "Add printer by IP"
-msgstr "按 IP 添加打印机"
-
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:224
-msgctxt "@label"
-msgid "Troubleshooting"
-msgstr "故障排除"
+msgid "Unavailable printer"
+msgstr "不可用的打印机"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:36
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
 msgctxt "@label"
-msgid "Ultimaker Cloud"
-msgstr "Ultimaker Cloud"
-
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:77
-msgctxt "@text"
-msgid "The next generation 3D printing workflow"
-msgstr "下一代 3D 打印工作流程"
-
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:94
-msgctxt "@text"
-msgid "- Send print jobs to Ultimaker printers outside your local network"
-msgstr "- 将打印作业发送到局域网外的 Ultimaker 打印机"
-
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:97
-msgctxt "@text"
-msgid "- Store your Ultimaker Cura settings in the cloud for use anywhere"
-msgstr "- 将 Ultimaker Cura 设置存储到云以便在任何地方使用"
+msgid "First available"
+msgstr "第一个可用"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:100
-msgctxt "@text"
-msgid "- Get exclusive access to print profiles from leading brands"
-msgstr "- 获得来自领先品牌的打印配置文件的独家访问权限"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
+msgctxt "@label:status"
+msgid "Aborted"
+msgstr "已中止"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:119
-msgctxt "@button"
-msgid "Finish"
-msgstr "完成"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
+msgctxt "@label:status"
+msgid "Finished"
+msgstr "已完成"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:128
-msgctxt "@button"
-msgid "Create an account"
-msgstr "创建帐户"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
+msgctxt "@label:status"
+msgid "Preparing..."
+msgstr "正在准备..."
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:138
-#: /home/ruben/Projects/Cura/resources/qml/Account/GeneralOperations.qml:68
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:48
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
-msgctxt "@button"
-msgid "Sign in"
-msgstr "登录"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
+msgctxt "@label:status"
+msgid "Aborting..."
+msgstr "正在中止..."
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
-msgctxt "@label"
-msgid "Add printer by IP address"
-msgstr "按 IP 地址添加打印机"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
+msgctxt "@label:status"
+msgid "Pausing..."
+msgstr "正在暂停..."
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
-msgctxt "@label"
-msgid "Enter the IP address of your printer on the network."
-msgstr "请输入打印机在网络上的 IP 地址。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
+msgctxt "@label:status"
+msgid "Paused"
+msgstr "已暂停"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
-msgctxt "@text"
-msgid "Place enter your printer's IP address."
-msgstr "打印机 IP 地址输入栏。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
+msgctxt "@label:status"
+msgid "Resuming..."
+msgstr "正在恢复..."
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
-msgctxt "@text"
-msgid "Please enter a valid IP address."
-msgstr "请输入有效的 IP 地址。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
+msgctxt "@label:status"
+msgid "Action required"
+msgstr "需要采取行动"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
-msgctxt "@button"
-msgid "Add"
-msgstr "添加"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
+msgctxt "@label:status"
+msgid "Finishes %1 at %2"
+msgstr "完成 %1 于 %2"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:204
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
 msgctxt "@label"
-msgid "Could not connect to device."
-msgstr "无法连接到设备。"
+msgid "Queued"
+msgstr "已排队"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:208
-msgctxt "@label"
-msgid "The printer at this address has not responded yet."
-msgstr "该网络地址的打印机尚未响应。"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:67
+msgctxt "@label link to connect manager"
+msgid "Manage in browser"
+msgstr "请于浏览器中进行管理"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:240
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:100
 msgctxt "@label"
-msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
-msgstr "由于是未知打印机或不是组内主机，无法添加该打印机。"
+msgid "There are no print jobs in the queue. Slice and send a job to add one."
+msgstr "队列中无打印任务。可通过切片和发送添加任务。"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:258
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:115
 msgctxt "@label"
-msgid "Type"
-msgstr "类型"
+msgid "Print jobs"
+msgstr "打印作业"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:274
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:131
 msgctxt "@label"
-msgid "Firmware version"
-msgstr "固件版本"
+msgid "Total print time"
+msgstr "总打印时间"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:290
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:147
 msgctxt "@label"
-msgid "Address"
-msgstr "地址"
-
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:329
-msgctxt "@button"
-msgid "Back"
-msgstr "返回"
+msgid "Waiting for"
+msgstr "等待"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:342
-msgctxt "@button"
-msgid "Connect"
-msgstr "连接"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
+msgctxt "@title:window"
+msgid "Print over network"
+msgstr "通过网络打印"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-msgctxt "@button"
-msgid "Next"
-msgstr "下一步"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
+msgctxt "@action:button"
+msgid "Print"
+msgstr "打印"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
 msgctxt "@label"
-msgid "Help us to improve Ultimaker Cura"
-msgstr "帮助我们改进 Ultimaker Cura"
-
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
-msgctxt "@text"
-msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
-msgstr "为了改善打印质量和用户体验，Ultimaker Cura 会收集匿名数据，这些数据包括："
-
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
-msgctxt "@text"
-msgid "Machine types"
-msgstr "机器类型"
+msgid "Printer selection"
+msgstr "打印机选择"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
-msgctxt "@text"
-msgid "Material usage"
-msgstr "材料使用"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/AccountWidget.qml:24
+msgctxt "@action:button"
+msgid "Sign in"
+msgstr "登录"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
-msgctxt "@text"
-msgid "Number of slices"
-msgstr "切片数量"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:40
+msgctxt "@label"
+msgid "Your key to connected 3D printing"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:51
 msgctxt "@text"
-msgid "Print settings"
-msgstr "打印设置"
+msgid ""
+"- Customize your experience with more print profiles and plugins\n"
+"- Stay flexible by syncing your setup and loading it anywhere\n"
+"- Increase efficiency with a remote workflow on Ultimaker printers"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
-msgctxt "@text"
-msgid "Data collected by Ultimaker Cura will not contain any personal information."
-msgstr "Ultimaker Cura 收集的数据不会包含任何个人信息。"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:78
+msgctxt "@button"
+msgid "Create account"
+msgstr "创建账户"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
-msgctxt "@text"
-msgid "More information"
-msgstr "更多信息"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:22
+msgctxt "@label The argument is a username."
+msgid "Hi %1"
+msgstr "%1，您好"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
-msgctxt "@label"
-msgid "Add a printer"
-msgstr "添加打印机"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:33
+msgctxt "@button"
+msgid "Ultimaker account"
+msgstr "Ultimaker 帐户"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
-msgctxt "@label"
-msgid "Add a networked printer"
-msgstr "添加已联网打印机"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:42
+msgctxt "@button"
+msgid "Sign out"
+msgstr "注销"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:81
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
 msgctxt "@label"
-msgid "Add a non-networked printer"
-msgstr "添加未联网打印机"
+msgid "No time estimation available"
+msgstr "无可用时间估计"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
 msgctxt "@label"
-msgid "User Agreement"
-msgstr "用户协议"
+msgid "No cost estimation available"
+msgstr "无可用成本估计"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
 msgctxt "@button"
-msgid "Decline and close"
-msgstr "拒绝并关闭"
+msgid "Preview"
+msgstr "预览"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:212
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
 msgctxt "@label"
-msgid "Printer name"
-msgstr "打印机名称"
-
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:225
-msgctxt "@text"
-msgid "Please give your printer a name"
-msgstr "请指定打印机名称"
+msgid "Time estimation"
+msgstr "预计时间"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
 msgctxt "@label"
-msgid "Empty"
-msgstr "空"
+msgid "Material estimation"
+msgstr "预计材料"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:24
-msgctxt "@label"
-msgid "What's new in Ultimaker Cura"
-msgstr "Ultimaker Cura 新增功能"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
+msgctxt "@label m for meter"
+msgid "%1m"
+msgstr "%1m"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:29
-msgctxt "@label"
-msgid "Welcome to Ultimaker Cura"
-msgstr "欢迎使用 Ultimaker Cura"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
+msgctxt "@label g for grams"
+msgid "%1g"
+msgstr "%1g"
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:47
-msgctxt "@text"
-msgid ""
-"Please follow these steps to set up\n"
-"Ultimaker Cura. This will only take a few moments."
-msgstr ""
-"请按照以下步骤设置\n"
-"Ultimaker Cura。此操作只需要几分钟时间。"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
+msgctxt "@label:PrintjobStatus"
+msgid "Slicing..."
+msgstr "正在切片..."
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:58
-msgctxt "@button"
-msgid "Get started"
-msgstr "开始"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
+msgctxt "@label:PrintjobStatus"
+msgid "Unable to slice"
+msgstr "无法切片"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:166
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
 msgctxt "@button"
-msgid "Add printer"
-msgstr "添加打印机"
+msgid "Processing"
+msgstr "正在处理中"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:182
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
 msgctxt "@button"
-msgid "Manage printers"
-msgstr "管理打印机"
+msgid "Slice"
+msgstr "切片"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
 msgctxt "@label"
-msgid "Connected printers"
-msgstr "已连接的打印机"
+msgid "Start the slicing process"
+msgstr "开始切片流程"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
-msgctxt "@label"
-msgid "Preset printers"
-msgstr "预设打印机"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
+msgctxt "@button"
+msgid "Cancel"
+msgstr "取消"
 
-#: /home/ruben/Projects/Cura/resources/qml/ExtruderButton.qml:16
-msgctxt "@label %1 is filled in with the name of an extruder"
-msgid "Print Selected Model with %1"
-msgid_plural "Print Selected Models with %1"
-msgstr[0] "用 %1 打印所选模型"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:82
+msgctxt "@action:inmenu"
+msgid "Show Online Troubleshooting Guide"
+msgstr "显示联机故障排除指南"
 
-#: /home/ruben/Projects/Cura/resources/qml/ViewOrientationControls.qml:27
-msgctxt "@info:tooltip"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:89
+msgctxt "@action:inmenu"
+msgid "Toggle Full Screen"
+msgstr "切换完整界面"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:97
+msgctxt "@action:inmenu"
+msgid "Exit Full Screen"
+msgstr "退出完整界面"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:104
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Undo"
+msgstr "撤销(&U)"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:114
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Redo"
+msgstr "重做(&R)"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:124
+msgctxt "@action:inmenu menubar:file"
+msgid "&Quit"
+msgstr "退出(&Q)"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:132
+msgctxt "@action:inmenu menubar:view"
 msgid "3D View"
 msgstr "3D 视图"
 
-#: /home/ruben/Projects/Cura/resources/qml/ViewOrientationControls.qml:40
-msgctxt "@info:tooltip"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:139
+msgctxt "@action:inmenu menubar:view"
 msgid "Front View"
 msgstr "正视图"
 
-#: /home/ruben/Projects/Cura/resources/qml/ViewOrientationControls.qml:53
-msgctxt "@info:tooltip"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:146
+msgctxt "@action:inmenu menubar:view"
 msgid "Top View"
 msgstr "顶视图"
 
-#: /home/ruben/Projects/Cura/resources/qml/ViewOrientationControls.qml:66
-msgctxt "@info:tooltip"
-msgid "Left View"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:153
+msgctxt "@action:inmenu menubar:view"
+msgid "Left Side View"
 msgstr "左视图"
 
-#: /home/ruben/Projects/Cura/resources/qml/ViewOrientationControls.qml:79
-msgctxt "@info:tooltip"
-msgid "Right View"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:160
+msgctxt "@action:inmenu menubar:view"
+msgid "Right Side View"
 msgstr "右视图"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:160
-msgctxt "@label:header"
-msgid "Custom profiles"
-msgstr "自定义配置文件"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:167
+msgctxt "@action:inmenu"
+msgid "Configure Cura..."
+msgstr "配置 Cura..."
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
-msgctxt "@label"
-msgid "Profile"
-msgstr "配置文件"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:174
+msgctxt "@action:inmenu menubar:printer"
+msgid "&Add Printer..."
+msgstr "新增打印机(&A)..."
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:172
-msgctxt "@tooltip"
-msgid ""
-"Some setting/override values are different from the values stored in the profile.\n"
-"\n"
-"Click to open the profile manager."
-msgstr ""
-"某些设置/重写值与存储在配置文件中的值不同。\n"
-"\n"
-"点击打开配置文件管理器。"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:180
+msgctxt "@action:inmenu menubar:printer"
+msgid "Manage Pr&inters..."
+msgstr "管理打印机(&I)..."
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
-msgctxt "@label:Should be short"
-msgid "On"
-msgstr "开"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:187
+msgctxt "@action:inmenu"
+msgid "Manage Materials..."
+msgstr "管理材料..."
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
-msgctxt "@label:Should be short"
-msgid "Off"
-msgstr "关"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:195
+msgctxt "@action:inmenu"
+msgid "Add more materials from Marketplace"
+msgstr "从市场添加更多材料"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
-msgctxt "@label"
-msgid "Experimental"
-msgstr "实验性"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:202
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Update profile with current settings/overrides"
+msgstr "使用当前设置 / 重写值更新配置文件（&U）"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
-msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
-msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
-msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
-msgstr[0] "没有 ％1 配置文件可用于挤出器 ％2 中的配置。将改为使用默认意图"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:210
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Discard current changes"
+msgstr "舍弃当前更改（&D）"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
-msgctxt "@label"
-msgid "Support"
-msgstr "支持"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:222
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Create profile from current settings/overrides..."
+msgstr "从当前设置 / 重写值创建配置文件（&C）..."
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
-msgctxt "@label"
-msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
-msgstr "在模型的悬垂（Overhangs）部分生成支撑结构。若不这样做，这些部分在打印时将倒塌。"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:228
+msgctxt "@action:inmenu menubar:profile"
+msgid "Manage Profiles..."
+msgstr "管理配置文件.."
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:248
-msgctxt "@label"
-msgid "Infill"
-msgstr "填充"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:236
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Online &Documentation"
+msgstr "显示在线文档(&D)"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
-msgctxt "@label"
-msgid "Gradual infill"
-msgstr "渐层填充"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:244
+msgctxt "@action:inmenu menubar:help"
+msgid "Report a &Bug"
+msgstr "BUG 反馈(&B)"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
-msgctxt "@label"
-msgid "Gradual infill will gradually increase the amount of infill towards the top."
-msgstr "渐层填充（Gradual infill）将随着打印高度的提升而逐渐加大填充密度。"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:252
+msgctxt "@action:inmenu menubar:help"
+msgid "What's New"
+msgstr "新增功能"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
-msgctxt "@tooltip"
-msgid "You have modified some profile settings. If you want to change these go to custom mode."
-msgstr "您已修改部分配置文件设置。 如果您想对其进行更改，请转至自定义模式。"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:258
+msgctxt "@action:inmenu menubar:help"
+msgid "About..."
+msgstr "关于..."
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
-msgctxt "@label"
-msgid "Adhesion"
-msgstr "附着"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:265
+msgctxt "@action:inmenu menubar:edit"
+msgid "Delete Selected Model"
+msgid_plural "Delete Selected Models"
+msgstr[0] "删除所选模型"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
-msgctxt "@label"
-msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
-msgstr "允许打印 Brim 或 Raft。这将在您的对象周围或下方添加一个容易切断的平面区域。"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:275
+msgctxt "@action:inmenu menubar:edit"
+msgid "Center Selected Model"
+msgid_plural "Center Selected Models"
+msgstr[0] "居中所选模型"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
-msgctxt "@button"
-msgid "Recommended"
-msgstr "推荐"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:284
+msgctxt "@action:inmenu menubar:edit"
+msgid "Multiply Selected Model"
+msgid_plural "Multiply Selected Models"
+msgstr[0] "复制所选模型"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
-msgctxt "@button"
-msgid "Custom"
-msgstr "自定义"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:293
+msgctxt "@action:inmenu"
+msgid "Delete Model"
+msgstr "删除模型"
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
-msgctxt "@label shown when we load a Gcode file"
-msgid "Print setup disabled. G-code file can not be modified."
-msgstr "打印设置已禁用。无法修改 G code 文件。"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:301
+msgctxt "@action:inmenu"
+msgid "Ce&nter Model on Platform"
+msgstr "使模型居于平台中央（&N）"
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingCategory.qml:234
-msgctxt "@label"
-msgid ""
-"Some hidden settings use values different from their normal calculated value.\n"
-"\n"
-"Click to make these settings visible."
-msgstr ""
-"一些隐藏设置正在使用有别于一般设置的计算值。\n"
-"\n"
-"单击以使这些设置可见。"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:307
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Group Models"
+msgstr "绑定模型（&G）"
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingView.qml:68
-msgctxt "@label:textbox"
-msgid "Search settings"
-msgstr "搜索设置"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:327
+msgctxt "@action:inmenu menubar:edit"
+msgid "Ungroup Models"
+msgstr "拆分模型"
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingView.qml:463
-msgctxt "@action:menu"
-msgid "Copy value to all extruders"
-msgstr "将值复制到所有挤出机"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:337
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Merge Models"
+msgstr "合并模型（&M）"
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingView.qml:472
-msgctxt "@action:menu"
-msgid "Copy all changed values to all extruders"
-msgstr "将所有修改值复制到所有挤出机"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:347
+msgctxt "@action:inmenu"
+msgid "&Multiply Model..."
+msgstr "复制模型…（&M）"
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingView.qml:509
-msgctxt "@action:menu"
-msgid "Hide this setting"
-msgstr "隐藏此设置"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:354
+msgctxt "@action:inmenu menubar:edit"
+msgid "Select All Models"
+msgstr "选择所有模型"
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingView.qml:522
-msgctxt "@action:menu"
-msgid "Don't show this setting"
-msgstr "不再显示此设置"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:364
+msgctxt "@action:inmenu menubar:edit"
+msgid "Clear Build Plate"
+msgstr "清空打印平台"
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingView.qml:526
-msgctxt "@action:menu"
-msgid "Keep this setting visible"
-msgstr "保持此设置可见"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:374
+msgctxt "@action:inmenu menubar:file"
+msgid "Reload All Models"
+msgstr "重新载入所有模型"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:383
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models To All Build Plates"
+msgstr "将所有模型编位到所有打印平台"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:390
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models"
+msgstr "编位所有的模型"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:398
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange Selection"
+msgstr "为所选模型编位"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:405
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Positions"
+msgstr "复位所有模型的位置"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:412
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Transformations"
+msgstr "复位所有模型的变动"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:419
+msgctxt "@action:inmenu menubar:file"
+msgid "&Open File(s)..."
+msgstr "打开文件（&O）..."
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:427
+msgctxt "@action:inmenu menubar:file"
+msgid "&New Project..."
+msgstr "新建项目（&N）..."
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:434
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Configuration Folder"
+msgstr "显示配置文件夹"
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingView.qml:545
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:441
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:441
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:545
 msgctxt "@action:menu"
 msgid "Configure setting visibility..."
 msgstr "配置设定可见性..."
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:81
-msgctxt "@label"
-msgid "This setting is not used because all the settings that it influences are overridden."
-msgstr "未使用此设置，因为受其影响的所有设置均已覆盖。"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:448
+msgctxt "@action:menu"
+msgid "&Marketplace"
+msgstr "市场(&M)"
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:86
-msgctxt "@label Header for list of settings."
-msgid "Affects"
-msgstr "影响"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:242
+msgctxt "@label"
+msgid "This package will be installed after restarting."
+msgstr "这个包将在重新启动后安装。"
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:91
-msgctxt "@label Header for list of settings."
-msgid "Affected By"
-msgstr "受影响项目"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:435
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:15
+msgctxt "@title:tab"
+msgid "General"
+msgstr "基本"
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:187
-msgctxt "@label"
-msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
-msgstr "此设置始终在所有挤出机之间共享。在此处更改它将改变所有挤出机的值。"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:438
+msgctxt "@title:tab"
+msgid "Settings"
+msgstr "设置"
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:191
-msgctxt "@label"
-msgid "The value is resolved from per-extruder values "
-msgstr "该值将会根据每一个挤出机的设置而确定 "
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:440
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:16
+msgctxt "@title:tab"
+msgid "Printers"
+msgstr "打印机"
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:230
-msgctxt "@label"
-msgid ""
-"This setting has a value that is different from the profile.\n"
-"\n"
-"Click to restore the value of the profile."
-msgstr ""
-"此设置的值与配置文件不同。\n"
-"\n"
-"单击以恢复配置文件的值。"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:444
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:34
+msgctxt "@title:tab"
+msgid "Profiles"
+msgstr "配置文件"
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:329
-msgctxt "@label"
-msgid ""
-"This setting is normally calculated, but it currently has an absolute value set.\n"
-"\n"
-"Click to restore the calculated value."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:563
+msgctxt "@title:window %1 is the application name"
+msgid "Closing %1"
 msgstr ""
-"此设置通常可被自动计算，但其当前已被绝对定义。\n"
-"\n"
-"单击以恢复自动计算的值。"
 
-#: /home/ruben/Projects/Cura/resources/qml/Account/GeneralOperations.qml:40
-msgctxt "@label"
-msgid "The next generation 3D printing workflow"
-msgstr "下一代 3D 打印工作流程"
-
-#: /home/ruben/Projects/Cura/resources/qml/Account/GeneralOperations.qml:51
-msgctxt "@text"
-msgid ""
-"- Send print jobs to Ultimaker printers outside your local network\n"
-"- Store your Ultimaker Cura settings in the cloud for use anywhere\n"
-"- Get exclusive access to print profiles from leading brands"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:564
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:576
+msgctxt "@label %1 is the application name"
+msgid "Are you sure you want to exit %1?"
 msgstr ""
-"- 将打印作业发送到局域网外的 Ultimaker 打印机\n"
-"- 将 Ultimaker Cura 设置存储到云以便在任何地方使用\n"
-"- 获得来自领先品牌的打印配置文件的独家访问权限"
 
-#: /home/ruben/Projects/Cura/resources/qml/Account/GeneralOperations.qml:78
-msgctxt "@button"
-msgid "Create account"
-msgstr "创建账户"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:614
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
+msgctxt "@title:window"
+msgid "Open file(s)"
+msgstr "打开文件"
 
-#: /home/ruben/Projects/Cura/resources/qml/Account/UserOperations.qml:22
-msgctxt "@label The argument is a username."
-msgid "Hi %1"
-msgstr "%1，您好"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:720
+msgctxt "@window:title"
+msgid "Install Package"
+msgstr "安装包"
 
-#: /home/ruben/Projects/Cura/resources/qml/Account/UserOperations.qml:33
-msgctxt "@button"
-msgid "Ultimaker account"
-msgstr "Ultimaker 帐户"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:728
+msgctxt "@title:window"
+msgid "Open File(s)"
+msgstr "打开文件"
 
-#: /home/ruben/Projects/Cura/resources/qml/Account/UserOperations.qml:42
-msgctxt "@button"
-msgid "Sign out"
-msgstr "注销"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:731
+msgctxt "@text:window"
+msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
+msgstr "我们已经在您选择的文件中找到一个或多个 G-Code 文件。您一次只能打开一个 G-Code 文件。若需打开 G-Code 文件，请仅选择一个。"
 
-#: /home/ruben/Projects/Cura/resources/qml/Account/AccountWidget.qml:24
-msgctxt "@action:button"
-msgid "Sign in"
-msgstr "登录"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:834
+msgctxt "@title:window"
+msgid "Add Printer"
+msgstr "新增打印机"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:15
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:842
 msgctxt "@title:window"
-msgid "About "
-msgstr "关于 "
+msgid "What's New"
+msgstr "新增功能"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:15
+msgctxt "@title:window The argument is the application name."
+msgid "About %1"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:57
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:57
 msgctxt "@label"
 msgid "version: %1"
 msgstr "版本： %1"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:72
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:72
 msgctxt "@label"
 msgid "End-to-end solution for fused filament 3D printing."
 msgstr "熔丝 3D 打印技术的的端对端解决方案。"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:85
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:85
 msgctxt "@info:credit"
 msgid ""
 "Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
@@ -3130,132 +3381,157 @@ msgstr ""
 "Cura 由 Ultimaker B.V. 与社区合作开发。\n"
 "Cura 使用以下开源项目："
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:135
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:135
 msgctxt "@label"
 msgid "Graphical user interface"
 msgstr "图形用户界面"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:136
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:136
 msgctxt "@label"
 msgid "Application framework"
 msgstr "应用框架"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:137
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:137
 msgctxt "@label"
 msgid "G-code generator"
 msgstr "G-code 生成器"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:138
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:138
 msgctxt "@label"
 msgid "Interprocess communication library"
 msgstr "进程间通信交互使用库"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:140
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:140
 msgctxt "@label"
 msgid "Programming language"
 msgstr "编程语言"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:141
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:141
 msgctxt "@label"
 msgid "GUI framework"
 msgstr "GUI 框架"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:142
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:142
 msgctxt "@label"
 msgid "GUI framework bindings"
 msgstr "GUI 框架绑定"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:143
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:143
 msgctxt "@label"
 msgid "C/C++ Binding library"
 msgstr "C / C++ 绑定库"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:144
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:144
 msgctxt "@label"
 msgid "Data interchange format"
 msgstr "数据交换格式"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:145
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:145
 msgctxt "@label"
 msgid "Support library for scientific computing"
 msgstr "科学计算支持库"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:146
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:146
 msgctxt "@label"
 msgid "Support library for faster math"
 msgstr "高速运算支持库"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:147
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:147
 msgctxt "@label"
 msgid "Support library for handling STL files"
 msgstr "用于处理 STL 文件的支持库"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:148
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:148
 msgctxt "@label"
 msgid "Support library for handling planar objects"
 msgstr "用于处理平面对象的支持库"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:149
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:149
 msgctxt "@label"
 msgid "Support library for handling triangular meshes"
 msgstr "用于处理三角网格的支持库"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:150
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:150
 msgctxt "@label"
 msgid "Support library for analysis of complex networks"
 msgstr "用于分析复杂网络的支持库"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:151
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:151
 msgctxt "@label"
 msgid "Support library for handling 3MF files"
 msgstr "用于处理 3MF 文件的支持库"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:152
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:152
 msgctxt "@label"
 msgid "Support library for file metadata and streaming"
 msgstr "用于文件元数据和流媒体的支持库"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:153
 msgctxt "@label"
 msgid "Serial communication library"
 msgstr "串口通讯库"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:154
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:154
 msgctxt "@label"
 msgid "ZeroConf discovery library"
 msgstr "ZeroConf 发现库"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:155
 msgctxt "@label"
 msgid "Polygon clipping library"
 msgstr "多边形剪辑库"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:156
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:156
 msgctxt "@Label"
 msgid "Python HTTP library"
 msgstr "Python HTTP 库"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:158
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:158
 msgctxt "@label"
 msgid "Font"
 msgstr "字体"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:159
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "SVG icons"
 msgstr "SVG 图标"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Linux cross-distribution application deployment"
 msgstr "Linux 交叉分布应用程序部署"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
+msgctxt "@title:window"
+msgid "Open project file"
+msgstr "打开项目文件"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:93
+msgctxt "@text:window"
+msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
+msgstr "这是一个 Cura 项目文件。您想将其作为一个项目打开还是从中导入模型？"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:103
+msgctxt "@text:window"
+msgid "Remember my choice"
+msgstr "记住我的选择"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:122
+msgctxt "@action:button"
+msgid "Open as project"
+msgstr "作为项目打开"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:131
+msgctxt "@action:button"
+msgid "Import models"
+msgstr "导入模型"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
 msgctxt "@title:window"
 msgid "Discard or Keep changes"
 msgstr "舍弃或保留更改"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
 msgctxt "@text:window"
 msgid ""
 "You have customized some profile settings.\n"
@@ -3264,1789 +3540,1599 @@ msgstr ""
 "您已自定义某些配置文件设置。\n"
 "您想保留或舍弃这些设置吗？"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:109
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:109
 msgctxt "@title:column"
 msgid "Profile settings"
 msgstr "配置文件设置"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:116
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:116
 msgctxt "@title:column"
 msgid "Default"
 msgstr "默认"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:123
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:123
 msgctxt "@title:column"
 msgid "Customized"
 msgstr "自定义"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:157
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:156
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:708
+msgctxt "@option:discardOrKeep"
+msgid "Always ask me this"
+msgstr "总是询问"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:157
 msgctxt "@option:discardOrKeep"
 msgid "Discard and never ask again"
 msgstr "舍弃更改，并不再询问此问题"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158
 msgctxt "@option:discardOrKeep"
 msgid "Keep and never ask again"
 msgstr "保留更改，并不再询问此问题"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:195
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:195
 msgctxt "@action:button"
 msgid "Discard"
 msgstr "舍弃"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:208
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:208
 msgctxt "@action:button"
 msgid "Keep"
 msgstr "保留"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:221
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:221
 msgctxt "@action:button"
 msgid "Create New Profile"
 msgstr "创建新配置文件"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
 msgctxt "@text:window"
 msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
 msgstr "我们已经在您所选择的文件中找到一个或多个项目文件，但一次只能打开一个项目文件。我们建议只从那些文件中导入模型而不打开项目。您要继续操作吗?"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:99
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:99
 msgctxt "@action:button"
 msgid "Import all as models"
 msgstr "导入所有模型"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
-msgctxt "@title:window"
-msgid "Open project file"
-msgstr "打开项目文件"
-
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:93
-msgctxt "@text:window"
-msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
-msgstr "这是一个 Cura 项目文件。您想将其作为一个项目打开还是从中导入模型？"
-
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:103
-msgctxt "@text:window"
-msgid "Remember my choice"
-msgstr "记住我的选择"
-
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:122
-msgctxt "@action:button"
-msgid "Open as project"
-msgstr "作为项目打开"
-
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:131
-msgctxt "@action:button"
-msgid "Import models"
-msgstr "导入模型"
-
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
 msgctxt "@title:window"
 msgid "Save Project"
 msgstr "保存项目"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:73
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:70
-msgctxt "@action:title"
-msgid "Summary - Cura Project"
-msgstr "摘要 - Cura 项目"
-
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:97
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:92
-msgctxt "@action:label"
-msgid "Printer settings"
-msgstr "打印机设置"
-
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:106
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:143
-msgctxt "@action:label"
-msgid "Type"
-msgstr "类型"
-
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:121
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:159
-msgctxt "@action:label"
-msgid "Printer Group"
-msgstr "打印机组"
-
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:121
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:246
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:216
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:323
-msgctxt "@action:label"
-msgid "Name"
-msgstr "名字"
-
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:177
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:177
 msgctxt "@action:label"
 msgid "Extruder %1"
 msgstr "挤出机 %1"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:193
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:193
 msgctxt "@action:label"
 msgid "%1 & material"
 msgstr "%1 & 材料"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:195
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:195
 msgctxt "@action:label"
 msgid "Material"
 msgstr "材料"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:222
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:180
-msgctxt "@action:label"
-msgid "Profile settings"
-msgstr "配置文件设置"
-
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:230
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:246
-msgctxt "@action:label"
-msgid "Not in profile"
-msgstr "不在配置文件中"
-
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:235
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:251
-msgctxt "@action:label"
-msgid "%1 override"
-msgid_plural "%1 overrides"
-msgstr[0] "%1 重写"
-
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:263
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:231
-msgctxt "@action:label"
-msgid "Intent"
-msgstr "Intent"
-
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:285
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:285
 msgctxt "@action:label"
 msgid "Don't show project summary on save again"
 msgstr "保存时不再显示项目摘要"
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:304
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:304
 msgctxt "@action:button"
 msgid "Save"
 msgstr "保存"
 
-#: /home/ruben/Projects/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
-msgctxt "@action:button"
-msgid "Marketplace"
-msgstr "市场"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ExtruderButton.qml:16
+msgctxt "@label %1 is filled in with the name of an extruder"
+msgid "Print Selected Model with %1"
+msgid_plural "Print Selected Models with %1"
+msgstr[0] "用 %1 打印所选模型"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/JobSpecs.qml:99
+msgctxt "@text Print job name"
+msgid "Untitled"
+msgstr "未命名"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&File"
+msgstr "文件(&F)"
 
-#: /home/ruben/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
 msgctxt "@title:menu menubar:toplevel"
 msgid "&Edit"
 msgstr "编辑（&E）"
 
-#: /home/ruben/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:55
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:48
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:12
+msgctxt "@title:menu menubar:toplevel"
+msgid "&View"
+msgstr "视图(&V)"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:50
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Settings"
+msgstr "设置(&S)"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:55
 msgctxt "@title:menu menubar:toplevel"
 msgid "E&xtensions"
 msgstr "扩展(&X)"
 
-#: /home/ruben/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:89
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:93
 msgctxt "@title:menu menubar:toplevel"
 msgid "P&references"
 msgstr "偏好设置（&R）"
 
-#: /home/ruben/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:97
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:101
 msgctxt "@title:menu menubar:toplevel"
 msgid "&Help"
 msgstr "帮助(&H)"
 
-#: /home/ruben/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:124
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:147
 msgctxt "@title:window"
 msgid "New project"
 msgstr "新建项目"
 
-#: /home/ruben/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:125
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148
 msgctxt "@info:question"
 msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
 msgstr "你确定要开始一个新项目吗？这将清除打印平台及任何未保存的设置。"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:82
-msgctxt "@action:inmenu"
-msgid "Show Online Troubleshooting Guide"
-msgstr "显示联机故障排除指南"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
+msgctxt "@action:button"
+msgid "Marketplace"
+msgstr "市场"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:89
-msgctxt "@action:inmenu"
-msgid "Toggle Full Screen"
-msgstr "切换完整界面"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
+msgctxt "@header"
+msgid "Configurations"
+msgstr "配置"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:97
-msgctxt "@action:inmenu"
-msgid "Exit Full Screen"
-msgstr "退出完整界面"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+msgctxt "@label"
+msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
+msgstr "此配置不可用，因为 %1 未被识别。请访问 %2 以下载正确的材料配置文件。"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:104
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Undo"
-msgstr "撤销(&U)"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+msgctxt "@label"
+msgid "Marketplace"
+msgstr "市场"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:114
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Redo"
-msgstr "重做(&R)"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
+msgctxt "@label"
+msgid "Loading available configurations from the printer..."
+msgstr "正在从打印机加载可用配置..."
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:124
-msgctxt "@action:inmenu menubar:file"
-msgid "&Quit"
-msgstr "退出(&Q)"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
+msgctxt "@label"
+msgid "The configurations are not available because the printer is disconnected."
+msgstr "该配置不可用，因为打印机已断开连接。"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:132
-msgctxt "@action:inmenu menubar:view"
-msgid "3D View"
-msgstr "3D 视图"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
+msgctxt "@label"
+msgid "Select configuration"
+msgstr "选择配置"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:139
-msgctxt "@action:inmenu menubar:view"
-msgid "Front View"
-msgstr "正视图"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
+msgctxt "@label"
+msgid "Configurations"
+msgstr "配置"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:146
-msgctxt "@action:inmenu menubar:view"
-msgid "Top View"
-msgstr "顶视图"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
+msgctxt "@header"
+msgid "Custom"
+msgstr "自定义"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:153
-msgctxt "@action:inmenu menubar:view"
-msgid "Left Side View"
-msgstr "左视图"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+msgctxt "@label"
+msgid "Printer"
+msgstr "打印机"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:160
-msgctxt "@action:inmenu menubar:view"
-msgid "Right Side View"
-msgstr "右视图"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+msgctxt "@label"
+msgid "Enabled"
+msgstr "已启用"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:167
-msgctxt "@action:inmenu"
-msgid "Configure Cura..."
-msgstr "配置 Cura..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:251
+msgctxt "@label"
+msgid "Material"
+msgstr "材料"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:174
-msgctxt "@action:inmenu menubar:printer"
-msgid "&Add Printer..."
-msgstr "新增打印机(&A)..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:378
+msgctxt "@label"
+msgid "Use glue for better adhesion with this material combination."
+msgstr "用胶粘和此材料组合以产生更好的附着。"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:180
-msgctxt "@action:inmenu menubar:printer"
-msgid "Manage Pr&inters..."
-msgstr "管理打印机(&I)..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:27
+msgctxt "@label"
+msgid "Print Selected Model With:"
+msgid_plural "Print Selected Models With:"
+msgstr[0] "打印所选模型："
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:187
-msgctxt "@action:inmenu"
-msgid "Manage Materials..."
-msgstr "管理材料..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:116
+msgctxt "@title:window"
+msgid "Multiply Selected Model"
+msgid_plural "Multiply Selected Models"
+msgstr[0] "复制所选模型"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:195
-msgctxt "@action:inmenu"
-msgid "Add more materials from Marketplace"
-msgstr "从市场添加更多材料"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:141
+msgctxt "@label"
+msgid "Number of Copies"
+msgstr "复制个数"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:202
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Update profile with current settings/overrides"
-msgstr "使用当前设置 / 重写值更新配置文件（&U）"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:33
+msgctxt "@title:menu menubar:file"
+msgid "&Save..."
+msgstr "保存(&S)..."
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:210
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Discard current changes"
-msgstr "舍弃当前更改（&D）"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:54
+msgctxt "@title:menu menubar:file"
+msgid "&Export..."
+msgstr "导出(&E)..."
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:222
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Create profile from current settings/overrides..."
-msgstr "从当前设置 / 重写值创建配置文件（&C）..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:65
+msgctxt "@action:inmenu menubar:file"
+msgid "Export Selection..."
+msgstr "导出选择..."
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:228
-msgctxt "@action:inmenu menubar:profile"
-msgid "Manage Profiles..."
-msgstr "管理配置文件.."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:13
+msgctxt "@label:category menu label"
+msgid "Material"
+msgstr "材料"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:236
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Online &Documentation"
-msgstr "显示在线文档(&D)"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:54
+msgctxt "@label:category menu label"
+msgid "Favorites"
+msgstr "收藏"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:244
-msgctxt "@action:inmenu menubar:help"
-msgid "Report a &Bug"
-msgstr "BUG 反馈(&B)"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:79
+msgctxt "@label:category menu label"
+msgid "Generic"
+msgstr "通用"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:252
-msgctxt "@action:inmenu menubar:help"
-msgid "What's New"
-msgstr "新增功能"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:25
+msgctxt "@label:category menu label"
+msgid "Network enabled printers"
+msgstr "网络打印机"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:258
-msgctxt "@action:inmenu menubar:help"
-msgid "About..."
-msgstr "关于..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:42
+msgctxt "@label:category menu label"
+msgid "Local printers"
+msgstr "本地打印机"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:265
-msgctxt "@action:inmenu menubar:edit"
-msgid "Delete Selected Model"
-msgid_plural "Delete Selected Models"
-msgstr[0] "删除所选模型"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open &Recent"
+msgstr "打开最近使用过的文件(&R)"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:275
-msgctxt "@action:inmenu menubar:edit"
-msgid "Center Selected Model"
-msgid_plural "Center Selected Models"
-msgstr[0] "居中所选模型"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:15
+msgctxt "@title:menu menubar:settings"
+msgid "&Printer"
+msgstr "打印机（&P）"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:284
-msgctxt "@action:inmenu menubar:edit"
-msgid "Multiply Selected Model"
-msgid_plural "Multiply Selected Models"
-msgstr[0] "复制所选模型"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:27
+msgctxt "@title:menu"
+msgid "&Material"
+msgstr "材料（&M）"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:293
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:36
 msgctxt "@action:inmenu"
-msgid "Delete Model"
-msgstr "删除模型"
+msgid "Set as Active Extruder"
+msgstr "设为主要挤出机"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:301
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:42
 msgctxt "@action:inmenu"
-msgid "Ce&nter Model on Platform"
-msgstr "使模型居于平台中央（&N）"
+msgid "Enable Extruder"
+msgstr "启用挤出机"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:307
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Group Models"
-msgstr "绑定模型（&G）"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:49
+msgctxt "@action:inmenu"
+msgid "Disable Extruder"
+msgstr "禁用挤出机"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:327
-msgctxt "@action:inmenu menubar:edit"
-msgid "Ungroup Models"
-msgstr "拆分模型"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
+msgctxt "@action:inmenu"
+msgid "Visible Settings"
+msgstr "可见设置"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:337
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Merge Models"
-msgstr "合并模型（&M）"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
+msgctxt "@action:inmenu"
+msgid "Collapse All Categories"
+msgstr "折叠所有类别"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:347
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
 msgctxt "@action:inmenu"
-msgid "&Multiply Model..."
-msgstr "复制模型…（&M）"
+msgid "Manage Setting Visibility..."
+msgstr "管理设置可见性..."
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:354
-msgctxt "@action:inmenu menubar:edit"
-msgid "Select All Models"
-msgstr "选择所有模型"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:19
+msgctxt "@action:inmenu menubar:view"
+msgid "&Camera position"
+msgstr "摄像头位置(&C)"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:364
-msgctxt "@action:inmenu menubar:edit"
-msgid "Clear Build Plate"
-msgstr "清空打印平台"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:44
+msgctxt "@action:inmenu menubar:view"
+msgid "Camera view"
+msgstr "摄像头视图"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:374
-msgctxt "@action:inmenu menubar:file"
-msgid "Reload All Models"
-msgstr "重新载入所有模型"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:47
+msgctxt "@action:inmenu menubar:view"
+msgid "Perspective"
+msgstr "透视"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:383
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models To All Build Plates"
-msgstr "将所有模型编位到所有打印平台"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:59
+msgctxt "@action:inmenu menubar:view"
+msgid "Orthographic"
+msgstr "正交"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:390
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models"
-msgstr "编位所有的模型"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:80
+msgctxt "@action:inmenu menubar:view"
+msgid "&Build plate"
+msgstr "打印平台(&B)"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:398
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange Selection"
-msgstr "为所选模型编位"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:119
+msgctxt "@label:MonitorStatus"
+msgid "Not connected to a printer"
+msgstr "未连接至打印机"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:405
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Positions"
-msgstr "复位所有模型的位置"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:123
+msgctxt "@label:MonitorStatus"
+msgid "Printer does not accept commands"
+msgstr "打印机不接受命令"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:412
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Transformations"
-msgstr "复位所有模型的变动"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:133
+msgctxt "@label:MonitorStatus"
+msgid "In maintenance. Please check the printer"
+msgstr "维护中。请检查打印机"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:419
-msgctxt "@action:inmenu menubar:file"
-msgid "&Open File(s)..."
-msgstr "打开文件（&O）..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:144
+msgctxt "@label:MonitorStatus"
+msgid "Lost connection with the printer"
+msgstr "与打印机的连接中断"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:427
-msgctxt "@action:inmenu menubar:file"
-msgid "&New Project..."
-msgstr "新建项目（&N）..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:146
+msgctxt "@label:MonitorStatus"
+msgid "Printing..."
+msgstr "打印中..."
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:434
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Configuration Folder"
-msgstr "显示配置文件夹"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:149
+msgctxt "@label:MonitorStatus"
+msgid "Paused"
+msgstr "已暂停"
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:448
-msgctxt "@action:menu"
-msgid "&Marketplace"
-msgstr "市场(&M)"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:152
+msgctxt "@label:MonitorStatus"
+msgid "Preparing..."
+msgstr "初始化中..."
 
-#: /home/ruben/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
-msgctxt "@title:window"
-msgid "More information on anonymous data collection"
-msgstr "更多关于匿名数据收集的信息"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:154
+msgctxt "@label:MonitorStatus"
+msgid "Please remove the print"
+msgstr "请取出打印件"
 
-#: /home/ruben/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
-msgctxt "@text:window"
-msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
-msgstr "为了改善打印质量和用户体验，Ultimaker Cura 会收集匿名数据。以下是所有数据分享的示例："
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:325
+msgctxt "@label"
+msgid "Abort Print"
+msgstr "中止打印"
 
-#: /home/ruben/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
-msgctxt "@text:window"
-msgid "I don't want to send anonymous data"
-msgstr "我不想发送匿名数据"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:337
+msgctxt "@label"
+msgid "Are you sure you want to abort the print?"
+msgstr "您确定要中止打印吗？"
 
-#: /home/ruben/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
-msgctxt "@text:window"
-msgid "Allow sending anonymous data"
-msgstr "允许发送匿名数据"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectSelector.qml:59
+msgctxt "@label"
+msgid "Object list"
+msgstr "对象列表"
 
-#: /home/ruben/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:227
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
-msgctxt "@action:button"
-msgid "OK"
-msgstr "确定"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:132
+msgctxt "@label"
+msgid "Interface"
+msgstr "接口"
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:19
-msgctxt "@title:window"
-msgid "Convert Image..."
-msgstr "转换图像..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:211
+msgctxt "@label"
+msgid "Currency:"
+msgstr "币种："
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:33
-msgctxt "@info:tooltip"
-msgid "The maximum distance of each pixel from \"Base.\""
-msgstr "每个像素与底板的最大距离"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:224
+msgctxt "@label"
+msgid "Theme:"
+msgstr "主题："
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:38
-msgctxt "@action:label"
-msgid "Height (mm)"
-msgstr "高度 (mm)"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:280
+msgctxt "@label"
+msgid "You will need to restart the application for these changes to have effect."
+msgstr "需重新启动 Cura，新的设置才能生效。"
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:56
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:297
 msgctxt "@info:tooltip"
-msgid "The base height from the build plate in millimeters."
-msgstr "距离打印平台的底板高度，以毫米为单位。"
-
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:61
-msgctxt "@action:label"
-msgid "Base (mm)"
-msgstr "底板 (mm)"
+msgid "Slice automatically when changing settings."
+msgstr "当设置被更改时自动进行切片。"
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:79
-msgctxt "@info:tooltip"
-msgid "The width in millimeters on the build plate."
-msgstr "打印平台宽度，以毫米为单位。"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:305
+msgctxt "@option:check"
+msgid "Slice automatically"
+msgstr "自动切片"
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:84
-msgctxt "@action:label"
-msgid "Width (mm)"
-msgstr "宽度 (mm)"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:319
+msgctxt "@label"
+msgid "Viewport behavior"
+msgstr "视区行为"
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:103
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:327
 msgctxt "@info:tooltip"
-msgid "The depth in millimeters on the build plate"
-msgstr "打印平台深度，以毫米为单位"
+msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly."
+msgstr "以红色突出显示模型需要增加支撑结构的区域。没有支撑，这些区域将无法正确打印。"
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:108
-msgctxt "@action:label"
-msgid "Depth (mm)"
-msgstr "深度 (mm)"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:336
+msgctxt "@option:check"
+msgid "Display overhang"
+msgstr "显示悬垂（Overhang）"
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:126
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:344
 msgctxt "@info:tooltip"
-msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
-msgstr "在影像浮雕中，为了阻挡更多光源通过，深色像素应对应于较厚的位置。在高度图中，浅色像素代表着更高的地形，因此浅色像素对应于生成的 3D 模型中较厚的位置。"
-
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Darker is higher"
-msgstr "颜色越深厚度越大"
+msgid "Moves the camera so the model is in the center of the view when a model is selected"
+msgstr "当模型被选中时，视角将自动调整到最合适的观察位置（模型处于正中央）"
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Lighter is higher"
-msgstr "颜色越浅厚度越大"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:349
+msgctxt "@action:button"
+msgid "Center camera when item is selected"
+msgstr "当项目被选中时，自动对中视角"
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:149
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:359
 msgctxt "@info:tooltip"
-msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
-msgstr "对于隐雕，提供一个用于半透明的简单对数模型。对于高度图，像素值与高度线性对应。"
+msgid "Should the default zoom behavior of cura be inverted?"
+msgstr "需要令 Cura 的默认缩放操作反转吗？"
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
-msgctxt "@item:inlistbox"
-msgid "Linear"
-msgstr "线性"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:364
+msgctxt "@action:button"
+msgid "Invert the direction of camera zoom."
+msgstr "反转视角变焦方向。"
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:172
-msgctxt "@item:inlistbox"
-msgid "Translucency"
-msgstr "半透明"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:380
+msgctxt "@info:tooltip"
+msgid "Should zooming move in the direction of the mouse?"
+msgstr "是否跟随鼠标方向进行缩放？"
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:171
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:380
 msgctxt "@info:tooltip"
-msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
-msgstr "穿透 1 毫米厚的打印件的光线百分比。降低此值将增大图像暗区中的对比度并减小图像亮区中的对比度。"
+msgid "Zooming towards the mouse is not supported in the orthographic perspective."
+msgstr "正交透视不支持通过鼠标进行缩放。"
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:177
-msgctxt "@action:label"
-msgid "1mm Transmittance (%)"
-msgstr "1 毫米透射率 (%)"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:385
+msgctxt "@action:button"
+msgid "Zoom toward mouse direction"
+msgstr "跟随鼠标方向缩放"
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:195
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:411
 msgctxt "@info:tooltip"
-msgid "The amount of smoothing to apply to the image."
-msgstr "要应用到图像的平滑量。"
-
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:200
-msgctxt "@action:label"
-msgid "Smoothing"
-msgstr "平滑"
+msgid "Should models on the platform be moved so that they no longer intersect?"
+msgstr "需要移动平台上的模型，使它们不再相交吗？"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
-msgctxt "@title:tab"
-msgid "Printer"
-msgstr "打印机"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:416
+msgctxt "@option:check"
+msgid "Ensure models are kept apart"
+msgstr "确保每个模型都保持分离"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
-msgctxt "@title:label"
-msgid "Nozzle Settings"
-msgstr "喷嘴设置"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:425
+msgctxt "@info:tooltip"
+msgid "Should models on the platform be moved down to touch the build plate?"
+msgstr "需要转动模型，使它们接触打印平台吗？"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
-msgctxt "@label"
-msgid "Nozzle size"
-msgstr "喷嘴孔径"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:430
+msgctxt "@option:check"
+msgid "Automatically drop models to the build plate"
+msgstr "自动下降模型到打印平台"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:88
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:102
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:203
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:223
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:243
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:285
-msgctxt "@label"
-msgid "mm"
-msgstr "mm"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:442
+msgctxt "@info:tooltip"
+msgid "Show caution message in g-code reader."
+msgstr "在 G-code 读取器中显示警告信息。"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
-msgctxt "@label"
-msgid "Compatible material diameter"
-msgstr "兼容的材料直径"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:451
+msgctxt "@option:check"
+msgid "Caution message in g-code reader"
+msgstr "G-code 读取器中的警告信息"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
-msgctxt "@label"
-msgid "Nozzle offset X"
-msgstr "喷嘴偏移 X"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:459
+msgctxt "@info:tooltip"
+msgid "Should layer be forced into compatibility mode?"
+msgstr "层视图要强制进入兼容模式吗？"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
-msgctxt "@label"
-msgid "Nozzle offset Y"
-msgstr "喷嘴偏移 Y"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:464
+msgctxt "@option:check"
+msgid "Force layer view compatibility mode (restart required)"
+msgstr "强制层视图兼容模式（需要重新启动）"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
-msgctxt "@label"
-msgid "Cooling Fan Number"
-msgstr "冷却风扇数量"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:474
+msgctxt "@info:tooltip"
+msgid "Should Cura open at the location it was closed?"
+msgstr "Cura 是否应该在关闭的位置打开？"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:162
-msgctxt "@title:label"
-msgid "Extruder Start G-code"
-msgstr "挤出机的开始 G-code"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:479
+msgctxt "@option:check"
+msgid "Restore window position on start"
+msgstr "恢复初始窗口位置"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:176
-msgctxt "@title:label"
-msgid "Extruder End G-code"
-msgstr "挤出机的结束 G-code"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:489
+msgctxt "@info:tooltip"
+msgid "What type of camera rendering should be used?"
+msgstr "应使用哪种类型的摄像头进行渲染？"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
-msgctxt "@title:label"
-msgid "Printer Settings"
-msgstr "打印机设置"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:496
+msgctxt "@window:text"
+msgid "Camera rendering:"
+msgstr "摄像头渲染："
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
-msgctxt "@label"
-msgid "X (Width)"
-msgstr "X (宽度)"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:507
+msgid "Perspective"
+msgstr "透视"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:84
-msgctxt "@label"
-msgid "Y (Depth)"
-msgstr "Y (深度)"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:508
+msgid "Orthographic"
+msgstr "正交"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:98
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:539
 msgctxt "@label"
-msgid "Z (Height)"
-msgstr "Z (高度)"
+msgid "Opening and saving files"
+msgstr "打开并保存文件"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:112
-msgctxt "@label"
-msgid "Build plate shape"
-msgstr "打印平台形状"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:546
+msgctxt "@info:tooltip"
+msgid "Should models be scaled to the build volume if they are too large?"
+msgstr "当模型的尺寸过大时，是否将模型自动缩小至成形空间体积？"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:125
-msgctxt "@label"
-msgid "Origin at center"
-msgstr "置中"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:551
+msgctxt "@option:check"
+msgid "Scale large models"
+msgstr "缩小过大模型"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:137
-msgctxt "@label"
-msgid "Heated bed"
-msgstr "加热床"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:561
+msgctxt "@info:tooltip"
+msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?"
+msgstr "当模型以米而不是毫米为单位时，模型可能会在打印平台中显得非常小。在此情况下是否进行放大？"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:149
-msgctxt "@label"
-msgid "Heated build volume"
-msgstr "加热的构建体积"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:566
+msgctxt "@option:check"
+msgid "Scale extremely small models"
+msgstr "放大过小模型"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:161
-msgctxt "@label"
-msgid "G-code flavor"
-msgstr "G-code 风格"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:576
+msgctxt "@info:tooltip"
+msgid "Should models be selected after they are loaded?"
+msgstr "模型是否应该在加载后被选中？"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:185
-msgctxt "@title:label"
-msgid "Printhead Settings"
-msgstr "打印头设置"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:581
+msgctxt "@option:check"
+msgid "Select models when loaded"
+msgstr "选择模型时加载"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:199
-msgctxt "@label"
-msgid "X min"
-msgstr "X 最小值"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:591
+msgctxt "@info:tooltip"
+msgid "Should a prefix based on the printer name be added to the print job name automatically?"
+msgstr "打印机名是否自动作为打印作业名称的前缀？"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:219
-msgctxt "@label"
-msgid "Y min"
-msgstr "Y 最小值"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:596
+msgctxt "@option:check"
+msgid "Add machine prefix to job name"
+msgstr "将机器前缀添加到作业名称中"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:239
-msgctxt "@label"
-msgid "X max"
-msgstr "X 最大值"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:606
+msgctxt "@info:tooltip"
+msgid "Should a summary be shown when saving a project file?"
+msgstr "保存项目文件时是否显示摘要？"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
-msgctxt "@label"
-msgid "Y max"
-msgstr "Y 最大值"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:610
+msgctxt "@option:check"
+msgid "Show summary dialog when saving project"
+msgstr "保存项目时显示摘要对话框"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:281
-msgctxt "@label"
-msgid "Gantry Height"
-msgstr "十字轴高度"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:620
+msgctxt "@info:tooltip"
+msgid "Default behavior when opening a project file"
+msgstr "打开项目文件时的默认行为"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:295
-msgctxt "@label"
-msgid "Number of Extruders"
-msgstr "挤出机数目"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:628
+msgctxt "@window:text"
+msgid "Default behavior when opening a project file: "
+msgstr "打开项目文件时的默认行为： "
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:341
-msgctxt "@label"
-msgid "Shared Heater"
-msgstr "共用加热器"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:642
+msgctxt "@option:openProject"
+msgid "Always ask me this"
+msgstr "总是询问"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:367
-msgctxt "@title:label"
-msgid "Start G-code"
-msgstr "开始 G-code"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:643
+msgctxt "@option:openProject"
+msgid "Always open as a project"
+msgstr "始终作为一个项目打开"
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:378
-msgctxt "@title:label"
-msgid "End G-code"
-msgstr "结束 G-code"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:644
+msgctxt "@option:openProject"
+msgid "Always import models"
+msgstr "始终导入模型"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
-msgctxt "@title"
-msgid "Marketplace"
-msgstr "市场"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:680
+msgctxt "@info:tooltip"
+msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
+msgstr "当您对配置文件进行更改并切换到其他配置文件时将显示一个对话框，询问您是否要保留修改。您也可以选择一个默认行为并令其不再显示该对话框。"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:689
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
 msgctxt "@label"
-msgid "Compatibility"
-msgstr "兼容性"
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
-msgctxt "@label:table_header"
-msgid "Machine"
-msgstr "机器"
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
-msgctxt "@label:table_header"
-msgid "Build Plate"
-msgstr "打印平台"
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
-msgctxt "@label:table_header"
-msgid "Support"
-msgstr "支持"
+msgid "Profiles"
+msgstr "配置文件"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
-msgctxt "@label:table_header"
-msgid "Quality"
-msgstr "质量"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:694
+msgctxt "@window:text"
+msgid "Default behavior for changed setting values when switching to a different profile: "
+msgstr "切换到不同配置文件时对设置值更改的默认操作： "
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
-msgctxt "@action:label"
-msgid "Technical Data Sheet"
-msgstr "技术数据表"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:709
+msgctxt "@option:discardOrKeep"
+msgid "Always discard changed settings"
+msgstr "总是舍失更改的设置"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
-msgctxt "@action:label"
-msgid "Safety Data Sheet"
-msgstr "安全数据表"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:710
+msgctxt "@option:discardOrKeep"
+msgid "Always transfer changed settings to new profile"
+msgstr "总是将更改的设置传输至新配置文件"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
-msgctxt "@action:label"
-msgid "Printing Guidelines"
-msgstr "打印指南"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:744
+msgctxt "@label"
+msgid "Privacy"
+msgstr "隐私"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
-msgctxt "@action:label"
-msgid "Website"
-msgstr "网站"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:751
+msgctxt "@info:tooltip"
+msgid "Should Cura check for updates when the program is started?"
+msgstr "当 Cura 启动时，是否自动检查更新？"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/SmallRatingWidget.qml:27
-msgctxt "@label"
-msgid "ratings"
-msgstr "评分"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:756
+msgctxt "@option:check"
+msgid "Check for updates on start"
+msgstr "启动时检查更新"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
-msgctxt "@label"
-msgid "Will install upon restarting"
-msgstr "将安装后重新启动"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:766
+msgctxt "@info:tooltip"
+msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored."
+msgstr "您愿意将关于您的打印数据以匿名形式发送到 Ultimaker 吗？注意：我们不会记录/发送任何模型、IP 地址或其他私人数据。"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
-msgctxt "@action:button"
-msgid "Update"
-msgstr "更新"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:771
+msgctxt "@option:check"
+msgid "Send (anonymous) print information"
+msgstr "（匿名）发送打印信息"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:780
 msgctxt "@action:button"
-msgid "Updating"
-msgstr "更新"
+msgid "More information"
+msgstr "详细信息"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:40
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:84
 msgctxt "@action:button"
-msgid "Updated"
-msgstr "更新"
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to update"
-msgstr "更新需要<a href='%1'>登录</a>"
+msgid "Activate"
+msgstr "激活"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:63
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:152
 msgctxt "@action:button"
-msgid "Downgrade"
-msgstr "降级"
+msgid "Rename"
+msgstr "重命名"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
 msgctxt "@action:button"
-msgid "Uninstall"
-msgstr "卸载"
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
-msgctxt "@info"
-msgid "You will need to restart Cura before changes in packages have effect."
-msgstr "在包装更改生效之前，您需要重新启动Cura。"
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:45
-msgctxt "@info:button"
-msgid "Quit Cura"
-msgstr "退出 Cura"
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/RatingWidget.qml:54
-msgctxt "@label"
-msgid "You need to login first before you can rate"
-msgstr "您需要登录才能评分"
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/RatingWidget.qml:54
-msgctxt "@label"
-msgid "You need to install the package before you can rate"
-msgstr "您需要安装程序包才能评分"
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
-msgctxt "@label"
-msgid "Featured"
-msgstr "精选"
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
-msgctxt "@info:tooltip"
-msgid "Go to Web Marketplace"
-msgstr "前往网上市场"
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
-msgctxt "@label"
-msgid "Search materials"
-msgstr "搜索材料"
+msgid "Create"
+msgstr "创建"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
 msgctxt "@action:button"
-msgid "Installed"
-msgstr "已安装"
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to install or update"
-msgstr "安装或更新需要<a href='%1'>登录</a>"
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Buy material spools</a>"
-msgstr "<a href='%1'>购买材料线轴</a>"
+msgid "Duplicate"
+msgstr "复制"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:167
 msgctxt "@action:button"
-msgid "Back"
-msgstr "背部"
+msgid "Import"
+msgstr "导入"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:179
 msgctxt "@action:button"
-msgid "Install"
-msgstr "安装"
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:34
-msgctxt "@title:tab"
-msgid "Plugins"
-msgstr "插件"
+msgid "Export"
+msgstr "导出"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
-msgctxt "@title:tab"
-msgid "Installed"
-msgstr "安装"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
+msgctxt "@action:label"
+msgid "Printer"
+msgstr "打印机"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
-msgctxt "@title"
-msgid "Changes from your account"
-msgstr "您的帐户有更改"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:274
+msgctxt "@title:window"
+msgid "Confirm Remove"
+msgstr "确认删除"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-msgctxt "@button"
-msgid "Dismiss"
-msgstr "解除"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:275
+msgctxt "@label (%1 is object name)"
+msgid "Are you sure you wish to remove %1? This cannot be undone!"
+msgstr "您确认要删除 %1？该操作无法恢复！"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
-msgctxt "@label"
-msgid "The following packages will be added:"
-msgstr "将添加以下程序包："
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
+msgctxt "@title:window"
+msgid "Import Material"
+msgstr "导入配置"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:95
-msgctxt "@label"
-msgid "The following packages can not be installed because of an incompatible Cura version:"
-msgstr "由于 Cura 版本不兼容，无法安装以下程序包："
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
+msgstr "无法导入材料 <filename>%1</filename>： <message>%2</message>"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
-msgctxt "@label"
-msgid "You need to accept the license to install the package"
-msgstr "需要接受许可证才能安装该程序包"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully imported material <filename>%1</filename>"
+msgstr "成功导入材料 <filename>%1</filename>"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
 msgctxt "@title:window"
-msgid "Confirm uninstall"
-msgstr "确认卸载"
+msgid "Export Material"
+msgstr "导出材料"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
-msgctxt "@text:window"
-msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
-msgstr "您正在卸载仍在使用的材料和/或配置文件。确认会将以下材料/配置文件重置为默认值。"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
+msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
+msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
+msgstr "无法导出材料至 <filename>%1</filename>： <message>%2</message>"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
-msgctxt "@text:window"
-msgid "Materials"
-msgstr "材料"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully exported material to <filename>%1</filename>"
+msgstr "成功导出材料至： <filename>%1</filename>"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
-msgctxt "@text:window"
-msgid "Profiles"
-msgstr "配置文件"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
+msgctxt "@title"
+msgid "Information"
+msgstr "信息"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
-msgctxt "@action:button"
-msgid "Confirm"
-msgstr "确认"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
+msgctxt "@title:window"
+msgid "Confirm Diameter Change"
+msgstr "确认直径更改"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:93
-msgctxt "@label"
-msgid "Your rating"
-msgstr "您的评分"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
+msgctxt "@label (%1 is a number)"
+msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
+msgstr "新的灯丝直径被设置为%1毫米，这与当前的挤出机不兼容。你想继续吗？"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:101
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
 msgctxt "@label"
-msgid "Version"
-msgstr "版本"
+msgid "Display Name"
+msgstr "显示名称"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:108
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
 msgctxt "@label"
-msgid "Last updated"
-msgstr "更新日期"
+msgid "Brand"
+msgstr "品牌"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:115
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
 msgctxt "@label"
-msgid "Author"
-msgstr "作者"
+msgid "Material Type"
+msgstr "材料类型"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:122
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
 msgctxt "@label"
-msgid "Downloads"
-msgstr "下载项"
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:31
-msgctxt "@description"
-msgid "Get plugins and materials verified by Ultimaker"
-msgstr "获取经过 Ultimaker 验证的插件和材料"
+msgid "Color"
+msgstr "颜色"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
 msgctxt "@label"
-msgid "Community Contributions"
-msgstr "社区贡献"
+msgid "Properties"
+msgstr "属性"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
 msgctxt "@label"
-msgid "Community Plugins"
-msgstr "社区插件"
+msgid "Density"
+msgstr "密度"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
 msgctxt "@label"
-msgid "Generic Materials"
-msgstr "通用材料"
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
-msgctxt "@info"
-msgid "Could not connect to the Cura Package database. Please check your connection."
-msgstr "无法连接到Cura包数据库。请检查您的连接。"
+msgid "Diameter"
+msgstr "直径"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:93
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
 msgctxt "@label"
-msgid "Website"
-msgstr "网站"
+msgid "Filament Cost"
+msgstr "耗材成本"
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:100
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
 msgctxt "@label"
-msgid "Email"
-msgstr "电子邮件"
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:16
-msgctxt "@info"
-msgid "Fetching packages..."
-msgstr "获取包..."
-
-#: /home/ruben/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
-msgctxt "@title"
-msgid "Build Plate Leveling"
-msgstr "打印平台调平"
+msgid "Filament weight"
+msgstr "耗材重量"
 
-#: /home/ruben/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
 msgctxt "@label"
-msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
-msgstr "为了确保打印质量出色，您现在可以开始调整您的打印平台。当您点击「移动到下一个位置」时，喷嘴将移动到可以调节的不同位置。"
+msgid "Filament length"
+msgstr "耗材长度"
 
-#: /home/ruben/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
 msgctxt "@label"
-msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
-msgstr "在打印头停止的每一个位置下方插入一张纸，并调整平台高度。当纸张恰好被喷嘴的尖端轻微压住时，此时打印平台的高度已被正确校准。"
-
-#: /home/ruben/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
-msgctxt "@action:button"
-msgid "Start Build Plate Leveling"
-msgstr "开始进行打印平台调平"
-
-#: /home/ruben/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
-msgctxt "@action:button"
-msgid "Move to Next Position"
-msgstr "移动到下一个位置"
+msgid "Cost per Meter"
+msgstr "每米成本"
 
-#: /home/ruben/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
 msgctxt "@label"
-msgid "Please select any upgrades made to this Ultimaker Original"
-msgstr "请选择适用于 Ultimaker Original 的升级文件"
+msgid "This material is linked to %1 and shares some of its properties."
+msgstr "此材料与 %1 相关联，并共享其某些属性。"
 
-#: /home/ruben/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
 msgctxt "@label"
-msgid "Heated Build Plate (official kit or self-built)"
-msgstr "热床（官方版本或自制）"
-
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
-msgctxt "@title:window"
-msgid "Connect to Networked Printer"
-msgstr "连接到网络打印机"
+msgid "Unlink Material"
+msgstr "解绑材料"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
 msgctxt "@label"
-msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
-msgstr "欲通过网络向打印机发送打印请求，请确保您的打印机已通过网线或 WIFI 连接至网络。若不能连接 Cura 与打印机，亦可通过使用 USB 设备将 G-code 文件传输到打印机。"
+msgid "Description"
+msgstr "描述"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
 msgctxt "@label"
-msgid "Select your printer from the list below:"
-msgstr "请从以下列表中选择您的打印机："
-
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
-msgctxt "@action:button"
-msgid "Edit"
-msgstr "编辑"
-
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
-msgctxt "@action:button"
-msgid "Refresh"
-msgstr "刷新"
+msgid "Adhesion Information"
+msgstr "粘附信息"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
 msgctxt "@label"
-msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
-msgstr "如果您的打印机未列出，请阅读<a href='%1'>网络打印故障排除指南</a>"
+msgid "Print settings"
+msgstr "打印设置"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:104
 msgctxt "@label"
-msgid "This printer is not set up to host a group of printers."
-msgstr "这台打印机未设置为运行一组打印机。"
+msgid "Create"
+msgstr "创建"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:121
 msgctxt "@label"
-msgid "This printer is the host for a group of %1 printers."
-msgstr "这台打印机是一组共 %1 台打印机的主机。"
+msgid "Duplicate"
+msgstr "复制"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
-msgctxt "@label"
-msgid "The printer at this address has not yet responded."
-msgstr "该网络地址的打印机尚未响应。"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:202
+msgctxt "@title:window"
+msgid "Create Profile"
+msgstr "创建配置文件"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
-msgctxt "@action:button"
-msgid "Connect"
-msgstr "连接"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:204
+msgctxt "@info"
+msgid "Please provide a name for this profile."
+msgstr "请为此配置文件提供名称。"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:260
 msgctxt "@title:window"
-msgid "Invalid IP address"
-msgstr "IP 地址无效"
+msgid "Duplicate Profile"
+msgstr "复制配置文件"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:291
 msgctxt "@title:window"
-msgid "Printer Address"
-msgstr "打印机网络地址"
-
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:132
-msgctxt "@label"
-msgid "Unavailable printer"
-msgstr "不可用的打印机"
-
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:134
-msgctxt "@label"
-msgid "First available"
-msgstr "第一个可用"
-
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:183
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:192
-msgctxt "@label"
-msgid "Glass"
-msgstr "玻璃"
-
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:248
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:256
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:514
-msgctxt "@info"
-msgid "Please update your printer's firmware to manage the queue remotely."
-msgstr "请及时更新打印机固件以远程管理打印队列。"
+msgid "Rename Profile"
+msgstr "重命名配置文件"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:304
 msgctxt "@title:window"
-msgid "Configuration Changes"
-msgstr "配置更改"
+msgid "Import Profile"
+msgstr "导入配置文件"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
-msgctxt "@action:button"
-msgid "Override"
-msgstr "覆盖"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:333
+msgctxt "@title:window"
+msgid "Export Profile"
+msgstr "导出配置文件"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
-msgctxt "@label"
-msgid "The assigned printer, %1, requires the following configuration change:"
-msgid_plural "The assigned printer, %1, requires the following configuration changes:"
-msgstr[0] "分配的打印机 %1 需要以下配置更改："
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:396
+msgctxt "@label %1 is printer name"
+msgid "Printer: %1"
+msgstr "打印机：%1"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
-msgctxt "@label"
-msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
-msgstr "已向打印机 %1 分配作业，但作业包含未知的材料配置。"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:554
+msgctxt "@action:button"
+msgid "Update profile with current settings/overrides"
+msgstr "使用当前设置 / 重写值更新配置文件"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
-msgctxt "@label"
-msgid "Change material %1 from %2 to %3."
-msgstr "将材料 %1 从 %2 更改为 %3。"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:561
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:258
+msgctxt "@action:button"
+msgid "Discard current changes"
+msgstr "舍弃当前更改"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
-msgctxt "@label"
-msgid "Load %3 as material %1 (This cannot be overridden)."
-msgstr "将 %3 作为材料 %1 进行加载（此操作无法覆盖）。"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:580
+msgctxt "@action:label"
+msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
+msgstr "此配置文件使用打印机指定的默认值，因此在下面的列表中没有此设置项。"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
-msgctxt "@label"
-msgid "Change print core %1 from %2 to %3."
-msgstr "将 Print Core %1 从 %2 更改为 %3。"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:588
+msgctxt "@action:label"
+msgid "Your current settings match the selected profile."
+msgstr "您当前的设置与选定的配置文件相匹配。"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
-msgctxt "@label"
-msgid "Change build plate to %1 (This cannot be overridden)."
-msgstr "将打印平台更改为 %1（此操作无法覆盖）。"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:606
+msgctxt "@title:tab"
+msgid "Global Settings"
+msgstr "全局设置"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
-msgctxt "@label"
-msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
-msgstr "覆盖将使用包含现有打印机配置的指定设置。这可能会导致打印失败。"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:61
+msgctxt "@info:status"
+msgid "Calculated"
+msgstr "已计算"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
-msgctxt "@label"
-msgid "Aluminum"
-msgstr "铝"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:75
+msgctxt "@title:column"
+msgid "Setting"
+msgstr "设置"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
-msgctxt "@label:status"
-msgid "Aborted"
-msgstr "已中止"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:82
+msgctxt "@title:column"
+msgid "Profile"
+msgstr "配置文件"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
-msgctxt "@label:status"
-msgid "Finished"
-msgstr "已完成"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:89
+msgctxt "@title:column"
+msgid "Current"
+msgstr "当前"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
-msgctxt "@label:status"
-msgid "Preparing..."
-msgstr "正在准备..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:97
+msgctxt "@title:column"
+msgid "Unit"
+msgstr "单位"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
-msgctxt "@label:status"
-msgid "Aborting..."
-msgstr "正在中止..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
+msgctxt "@title:tab"
+msgid "Setting Visibility"
+msgstr "设置可见性"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
-msgctxt "@label:status"
-msgid "Pausing..."
-msgstr "正在暂停..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
+msgctxt "@label:textbox"
+msgid "Check all"
+msgstr "全部勾选"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
-msgctxt "@label:status"
-msgid "Paused"
-msgstr "已暂停"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
+msgctxt "@label"
+msgid "Extruder"
+msgstr "挤出机"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
-msgctxt "@label:status"
-msgid "Resuming..."
-msgstr "正在恢复..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
+msgctxt "@tooltip"
+msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
+msgstr "热端的目标温度。 热端将加热或冷却至此温度。 如果目标温度为 0，则热端加热将关闭。"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
-msgctxt "@label:status"
-msgid "Action required"
-msgstr "需要采取行动"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
+msgctxt "@tooltip"
+msgid "The current temperature of this hotend."
+msgstr "该热端的当前温度。"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
-msgctxt "@label:status"
-msgid "Finishes %1 at %2"
-msgstr "完成 %1 于 %2"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
+msgctxt "@tooltip of temperature input"
+msgid "The temperature to pre-heat the hotend to."
+msgstr "热端的预热温度。"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:155
-msgctxt "@label link to Connect and Cloud interfaces"
-msgid "Manage printer"
-msgstr "管理打印机"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
+msgctxt "@button Cancel pre-heating"
+msgid "Cancel"
+msgstr "取消"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:289
-msgctxt "@info"
-msgid "The webcam is not available because you are monitoring a cloud printer."
-msgstr "网络摄像头不可用，因为您正在监控云打印机。"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
+msgctxt "@button"
+msgid "Pre-heat"
+msgstr "预热"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
-msgctxt "@label:status"
-msgid "Loading..."
-msgstr "正在加载..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
+msgctxt "@tooltip of pre-heat"
+msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
+msgstr "打印前请预热热端。您可以在热端加热时继续调整打印机，而不必等待热端加热完毕再做好打印准备。"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
-msgctxt "@label:status"
-msgid "Unavailable"
-msgstr "不可用"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
+msgctxt "@tooltip"
+msgid "The colour of the material in this extruder."
+msgstr "该挤出机中材料的颜色。"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
-msgctxt "@label:status"
-msgid "Unreachable"
-msgstr "无法连接"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
+msgctxt "@tooltip"
+msgid "The material in this extruder."
+msgstr "该挤出机中的材料。"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
-msgctxt "@label:status"
-msgid "Idle"
-msgstr "空闲"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
+msgctxt "@tooltip"
+msgid "The nozzle inserted in this extruder."
+msgstr "该挤出机所使用的喷嘴。"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:401
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
 msgctxt "@label"
-msgid "Untitled"
-msgstr "未命名"
+msgid "Build plate"
+msgstr "打印平台"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:422
-msgctxt "@label"
-msgid "Anonymous"
-msgstr "匿名"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
+msgctxt "@tooltip"
+msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
+msgstr "热床的目标温度。热床将加热或冷却至此温度。若设置为 0，则不使用热床。"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:449
-msgctxt "@label:status"
-msgid "Requires configuration changes"
-msgstr "需要更改配置"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
+msgctxt "@tooltip"
+msgid "The current temperature of the heated bed."
+msgstr "热床当前温度。"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:487
-msgctxt "@action:button"
-msgid "Details"
-msgstr "详细信息"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
+msgctxt "@tooltip of temperature input"
+msgid "The temperature to pre-heat the bed to."
+msgstr "热床的预热温度。"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
-msgctxt "@label"
-msgid "Move to top"
-msgstr "移至顶部"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
+msgctxt "@tooltip of pre-heat"
+msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
+msgstr "打印前请预热热床。您可以在热床加热时继续调整相关项，让您在准备打印时不必等待热床加热完毕。"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
 msgctxt "@label"
-msgid "Delete"
-msgstr "删除"
+msgid "Printer control"
+msgstr "打印机控制"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
 msgctxt "@label"
-msgid "Pausing..."
-msgstr "正在暂停..."
+msgid "Jog Position"
+msgstr "垛齐位置"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
 msgctxt "@label"
-msgid "Resuming..."
-msgstr "正在恢复..."
+msgid "X/Y"
+msgstr "X/Y"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
 msgctxt "@label"
-msgid "Aborting..."
-msgstr "正在中止..."
+msgid "Z"
+msgstr "Z"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
 msgctxt "@label"
-msgid "Abort"
-msgstr "中止"
-
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
-msgctxt "@label %1 is the name of a print job."
-msgid "Are you sure you want to move %1 to the top of the queue?"
-msgstr "您确定要将 %1 移至队列顶部吗？"
-
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
-msgctxt "@window:title"
-msgid "Move print job to top"
-msgstr "将打印作业移至顶部"
+msgid "Jog Distance"
+msgstr "垛齐距离"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
-msgctxt "@label %1 is the name of a print job."
-msgid "Are you sure you want to delete %1?"
-msgstr "您确定要删除 %1 吗？"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
+msgctxt "@label"
+msgid "Send G-code"
+msgstr "发送 G-code"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
-msgctxt "@window:title"
-msgid "Delete print job"
-msgstr "删除打印作业"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
+msgctxt "@tooltip of G-code command input"
+msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
+msgstr "向连接的打印机发送自定义 G-code 命令。按“Enter”发送命令。"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
-msgctxt "@label %1 is the name of a print job."
-msgid "Are you sure you want to abort %1?"
-msgstr "您确定要中止 %1 吗？"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
+msgctxt "@info:status"
+msgid "The printer is not connected."
+msgstr "尚未连接到打印机。"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
-msgctxt "@title:window"
-msgid "Print over network"
-msgstr "通过网络打印"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:166
+msgctxt "@button"
+msgid "Add printer"
+msgstr "添加打印机"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
-msgctxt "@action:button"
-msgid "Print"
-msgstr "打印"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:182
+msgctxt "@button"
+msgid "Manage printers"
+msgstr "管理打印机"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
 msgctxt "@label"
-msgid "Printer selection"
-msgstr "打印机选择"
+msgid "Connected printers"
+msgstr "已连接的打印机"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
 msgctxt "@label"
-msgid "Queued"
-msgstr "已排队"
+msgid "Preset printers"
+msgstr "预设打印机"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:67
-msgctxt "@label link to connect manager"
-msgid "Manage in browser"
-msgstr "请于浏览器中进行管理"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:140
+msgctxt "@label"
+msgid "Active print"
+msgstr "正在打印"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:100
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:148
 msgctxt "@label"
-msgid "There are no print jobs in the queue. Slice and send a job to add one."
-msgstr "队列中无打印任务。可通过切片和发送添加任务。"
+msgid "Job Name"
+msgstr "作业名"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:115
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:156
 msgctxt "@label"
-msgid "Print jobs"
-msgstr "打印作业"
+msgid "Printing Time"
+msgstr "打印时间"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:131
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:164
 msgctxt "@label"
-msgid "Total print time"
-msgstr "总打印时间"
+msgid "Estimated time left"
+msgstr "预计剩余时间"
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:147
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
 msgctxt "@label"
-msgid "Waiting for"
-msgstr "等待"
+msgid "Profile"
+msgstr "配置文件"
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:14
-msgctxt "@title:window"
-msgid "Open Project"
-msgstr "打开项目"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:172
+msgctxt "@tooltip"
+msgid ""
+"Some setting/override values are different from the values stored in the profile.\n"
+"\n"
+"Click to open the profile manager."
+msgstr ""
+"某些设置/重写值与存储在配置文件中的值不同。\n"
+"\n"
+"点击打开配置文件管理器。"
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:58
-msgctxt "@action:ComboBox Update/override existing profile"
-msgid "Update existing"
-msgstr "更新已有配置"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:160
+msgctxt "@label:header"
+msgid "Custom profiles"
+msgstr "自定义配置文件"
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:59
-msgctxt "@action:ComboBox Save settings in a new profile"
-msgid "Create new"
-msgstr "新建"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
+msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
+msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
+msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
+msgstr[0] "没有 ％1 配置文件可用于挤出器 ％2 中的配置。将改为使用默认意图"
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:108
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the machine be resolved?"
-msgstr "机器的设置冲突应如何解决？"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
+msgctxt "@label shown when we load a Gcode file"
+msgid "Print setup disabled. G-code file can not be modified."
+msgstr "打印设置已禁用。无法修改 G code 文件。"
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:115
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:124
-msgctxt "@action:ComboBox option"
-msgid "Update"
-msgstr "更新"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+msgctxt "@button"
+msgid "Recommended"
+msgstr "推荐"
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:116
-msgctxt "@action:ComboBox option"
-msgid "Create new"
-msgstr "新建"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+msgctxt "@button"
+msgid "Custom"
+msgstr "自定义"
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:196
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the profile be resolved?"
-msgstr "配置文件中的冲突如何解决？"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
+msgctxt "@label:Should be short"
+msgid "On"
+msgstr "开"
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:262
-msgctxt "@action:label"
-msgid "Derivative from"
-msgstr "衍生自"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
+msgctxt "@label:Should be short"
+msgid "Off"
+msgstr "关"
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:267
-msgctxt "@action:label"
-msgid "%1, %2 override"
-msgid_plural "%1, %2 overrides"
-msgstr[0] "%1, %2 重写"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
+msgctxt "@label"
+msgid "Experimental"
+msgstr "实验性"
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:283
-msgctxt "@action:label"
-msgid "Material settings"
-msgstr "材料设置"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
+msgctxt "@label"
+msgid "Adhesion"
+msgstr "附着"
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:299
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the material be resolved?"
-msgstr "材料的设置冲突应如何解决？"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
+msgctxt "@label"
+msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
+msgstr "允许打印 Brim 或 Raft。这将在您的对象周围或下方添加一个容易切断的平面区域。"
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:342
-msgctxt "@action:label"
-msgid "Setting visibility"
-msgstr "设置可见性"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
+msgctxt "@label"
+msgid "Gradual infill"
+msgstr "渐层填充"
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:351
-msgctxt "@action:label"
-msgid "Mode"
-msgstr "模式"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
+msgctxt "@label"
+msgid "Gradual infill will gradually increase the amount of infill towards the top."
+msgstr "渐层填充（Gradual infill）将随着打印高度的提升而逐渐加大填充密度。"
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:367
-msgctxt "@action:label"
-msgid "Visible settings:"
-msgstr "可见设置："
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
+msgctxt "@tooltip"
+msgid "You have modified some profile settings. If you want to change these go to custom mode."
+msgstr "您已修改部分配置文件设置。 如果您想对其进行更改，请转至自定义模式。"
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:372
-msgctxt "@action:label"
-msgid "%1 out of %2"
-msgstr "%1 / %2"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+msgctxt "@label"
+msgid "Support"
+msgstr "支持"
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:398
-msgctxt "@action:warning"
-msgid "Loading a project will clear all models on the build plate."
-msgstr "加载项目将清除打印平台上的所有模型。"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
+msgctxt "@label"
+msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
+msgstr "在模型的悬垂（Overhangs）部分生成支撑结构。若不这样做，这些部分在打印时将倒塌。"
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:416
-msgctxt "@action:button"
-msgid "Open"
-msgstr "打开"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingCategory.qml:234
+msgctxt "@label"
+msgid ""
+"Some hidden settings use values different from their normal calculated value.\n"
+"\n"
+"Click to make these settings visible."
+msgstr ""
+"一些隐藏设置正在使用有别于一般设置的计算值。\n"
+"\n"
+"单击以使这些设置可见。"
 
-#: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:45
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:81
 msgctxt "@label"
-msgid "Mesh Type"
-msgstr "网格类型"
+msgid "This setting is not used because all the settings that it influences are overridden."
+msgstr "未使用此设置，因为受其影响的所有设置均已覆盖。"
 
-#: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:87
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:86
+msgctxt "@label Header for list of settings."
+msgid "Affects"
+msgstr "影响"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:91
+msgctxt "@label Header for list of settings."
+msgid "Affected By"
+msgstr "受影响项目"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:187
 msgctxt "@label"
-msgid "Normal model"
-msgstr "正常模式"
+msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
+msgstr "此设置始终在所有挤出机之间共享。在此处更改它将改变所有挤出机的值。"
 
-#: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:99
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:191
 msgctxt "@label"
-msgid "Print as support"
-msgstr "打印为支撑"
+msgid "This setting is resolved from conflicting extruder-specific values:"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:111
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:230
 msgctxt "@label"
-msgid "Modify settings for overlaps"
-msgstr "修改重叠设置"
+msgid ""
+"This setting has a value that is different from the profile.\n"
+"\n"
+"Click to restore the value of the profile."
+msgstr ""
+"此设置的值与配置文件不同。\n"
+"\n"
+"单击以恢复配置文件的值。"
 
-#: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:123
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:329
 msgctxt "@label"
-msgid "Don't support overlaps"
-msgstr "不支持重叠"
+msgid ""
+"This setting is normally calculated, but it currently has an absolute value set.\n"
+"\n"
+"Click to restore the calculated value."
+msgstr ""
+"此设置通常可被自动计算，但其当前已被绝对定义。\n"
+"\n"
+"单击以恢复自动计算的值。"
 
-#: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:147
-msgctxt "@action:checkbox"
-msgid "Infill only"
-msgstr "仅填充"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:68
+msgctxt "@label:textbox"
+msgid "Search settings"
+msgstr "搜索设置"
 
-#: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:368
-msgctxt "@action:button"
-msgid "Select settings"
-msgstr "选择设置"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:463
+msgctxt "@action:menu"
+msgid "Copy value to all extruders"
+msgstr "将值复制到所有挤出机"
 
-#: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
-msgctxt "@title:window"
-msgid "Select Settings to Customize for this model"
-msgstr "选择对此模型的自定义设置"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:472
+msgctxt "@action:menu"
+msgid "Copy all changed values to all extruders"
+msgstr "将所有修改值复制到所有挤出机"
 
-#: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:70
-msgctxt "@label:checkbox"
-msgid "Show all"
-msgstr "显示全部"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:509
+msgctxt "@action:menu"
+msgid "Hide this setting"
+msgstr "隐藏此设置"
 
-#: /home/ruben/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
-msgctxt "@title:window"
-msgid "Post Processing Plugin"
-msgstr "后期处理插件"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:522
+msgctxt "@action:menu"
+msgid "Don't show this setting"
+msgstr "不再显示此设置"
 
-#: /home/ruben/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
-msgctxt "@label"
-msgid "Post Processing Scripts"
-msgstr "后期处理脚本"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:526
+msgctxt "@action:menu"
+msgid "Keep this setting visible"
+msgstr "保持此设置可见"
 
-#: /home/ruben/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
-msgctxt "@action"
-msgid "Add a script"
-msgstr "添加一个脚本"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:27
+msgctxt "@info:tooltip"
+msgid "3D View"
+msgstr "3D 视图"
 
-#: /home/ruben/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
-msgctxt "@label"
-msgid "Settings"
-msgstr "设置"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:40
+msgctxt "@info:tooltip"
+msgid "Front View"
+msgstr "正视图"
 
-#: /home/ruben/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:493
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:53
 msgctxt "@info:tooltip"
-msgid "Change active post-processing scripts"
-msgstr "更改目前启用的后期处理脚本"
+msgid "Top View"
+msgstr "顶视图"
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
-msgctxt "@title"
-msgid "Update Firmware"
-msgstr "更新固件"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:66
+msgctxt "@info:tooltip"
+msgid "Left View"
+msgstr "左视图"
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
-msgctxt "@label"
-msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
-msgstr "固件是直接在 3D 打印机上运行的一个软件。此固件控制步进电机，调节温度并最终使打印机正常工作。"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:79
+msgctxt "@info:tooltip"
+msgid "Right View"
+msgstr "右视图"
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewsSelector.qml:50
 msgctxt "@label"
-msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
-msgstr "新打印机出厂配备的固件完全可以正常使用，但新版本往往具有更多的新功能和改进。"
+msgid "View type"
+msgstr "查看类型"
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
-msgctxt "@action:button"
-msgid "Automatically upgrade Firmware"
-msgstr "自动升级固件"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:212
+msgctxt "@label"
+msgid "Printer name"
+msgstr "打印机名称"
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
-msgctxt "@action:button"
-msgid "Upload custom Firmware"
-msgstr "上传自定义固件"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:225
+msgctxt "@text"
+msgid "Please give your printer a name"
+msgstr "请指定打印机名称"
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
 msgctxt "@label"
-msgid "Firmware can not be updated because there is no connection with the printer."
-msgstr "未连接打印机，无法更新固件。"
+msgid "Add a printer"
+msgstr "添加打印机"
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
 msgctxt "@label"
-msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
-msgstr "与打印机间的连接不支持固件更新，因此无法更新固件。"
-
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
-msgctxt "@title:window"
-msgid "Select custom firmware"
-msgstr "选择自定义固件"
+msgid "Add a networked printer"
+msgstr "添加已联网打印机"
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
-msgctxt "@title:window"
-msgid "Firmware Update"
-msgstr "固件升级"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:81
+msgctxt "@label"
+msgid "Add a non-networked printer"
+msgstr "添加未联网打印机"
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:42
 msgctxt "@label"
-msgid "Updating firmware."
-msgstr "更新固件中..."
+msgid "There is no printer found over your network."
+msgstr "未找到网络内打印机。"
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:180
 msgctxt "@label"
-msgid "Firmware update completed."
-msgstr "固件更新已完成。"
+msgid "Refresh"
+msgstr "刷新"
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:191
 msgctxt "@label"
-msgid "Firmware update failed due to an unknown error."
-msgstr "由于未知错误，固件更新失败。"
+msgid "Add printer by IP"
+msgstr "按 IP 添加打印机"
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:224
 msgctxt "@label"
-msgid "Firmware update failed due to an communication error."
-msgstr "由于通信错误，导致固件升级失败。"
+msgid "Troubleshooting"
+msgstr "故障排除"
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
 msgctxt "@label"
-msgid "Firmware update failed due to an input/output error."
-msgstr "由于输入/输出错误，导致固件升级失败。"
+msgid "Add printer by IP address"
+msgstr "按 IP 地址添加打印机"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
+msgctxt "@text"
+msgid "Place enter your printer's IP address."
+msgstr "打印机 IP 地址输入栏。"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+msgctxt "@button"
+msgid "Add"
+msgstr "添加"
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
 msgctxt "@label"
-msgid "Firmware update failed due to missing firmware."
-msgstr "由于固件丢失，导致固件升级失败。"
+msgid "Could not connect to device."
+msgstr "无法连接到设备。"
 
-#: /home/ruben/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:100
-msgctxt "@info"
-msgid ""
-"Please make sure your printer has a connection:\n"
-"- Check if the printer is turned on.\n"
-"- Check if the printer is connected to the network.\n"
-"- Check if you are signed in to discover cloud-connected printers."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
+msgctxt "@label"
+msgid "Can't connect to your Ultimaker printer?"
 msgstr ""
-"请确保您的打印机已连接：\n"
-"- 检查打印机是否已启动。\n"
-"- 检查打印机是否连接至网络。\n"
-"- 检查您是否已登录查找云连接的打印机。"
 
-#: /home/ruben/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:117
-msgctxt "@info"
-msgid "Please connect your printer to the network."
-msgstr "请将打印机连接到网络。"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
+msgctxt "@label"
+msgid "The printer at this address has not responded yet."
+msgstr "该网络地址的打印机尚未响应。"
 
-#: /home/ruben/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:156
-msgctxt "@label link to technical assistance"
-msgid "View user manuals online"
-msgstr "查看联机用户手册"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
+msgctxt "@label"
+msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
+msgstr "由于是未知打印机或不是组内主机，无法添加该打印机。"
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
 msgctxt "@button"
-msgid "Want more?"
-msgstr "想要更多？"
+msgid "Back"
+msgstr "返回"
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
 msgctxt "@button"
-msgid "Backup Now"
-msgstr "立即备份"
-
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
-msgctxt "@checkbox:description"
-msgid "Auto Backup"
-msgstr "自动备份"
+msgid "Connect"
+msgstr "连接"
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
-msgctxt "@checkbox:description"
-msgid "Automatically create a backup each day that Cura is started."
-msgstr "在 Cura 每天启动时自动创建备份。"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:36
+msgctxt "@label"
+msgid "Ultimaker Account"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
-msgctxt "@backuplist:label"
-msgid "Cura Version"
-msgstr "Cura 版本"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:77
+msgctxt "@text"
+msgid "Your key to connected 3D printing"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
-msgctxt "@backuplist:label"
-msgid "Machines"
-msgstr "机器"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:94
+msgctxt "@text"
+msgid "- Customize your experience with more print profiles and plugins"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
-msgctxt "@backuplist:label"
-msgid "Materials"
-msgstr "材料"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:97
+msgctxt "@text"
+msgid "- Stay flexible by syncing your setup and loading it anywhere"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
-msgctxt "@backuplist:label"
-msgid "Profiles"
-msgstr "配置文件"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:100
+msgctxt "@text"
+msgid "- Increase efficiency with a remote workflow on Ultimaker printers"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
-msgctxt "@backuplist:label"
-msgid "Plugins"
-msgstr "插件"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:119
+msgctxt "@button"
+msgid "Finish"
+msgstr "完成"
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:128
 msgctxt "@button"
-msgid "Restore"
-msgstr "恢复"
+msgid "Create an account"
+msgstr "创建帐户"
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
-msgctxt "@dialog:title"
-msgid "Delete Backup"
-msgstr "删除备份"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+msgctxt "@label"
+msgid "Help us to improve Ultimaker Cura"
+msgstr "帮助我们改进 Ultimaker Cura"
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
-msgctxt "@dialog:info"
-msgid "Are you sure you want to delete this backup? This cannot be undone."
-msgstr "您确定要删除此备份吗？此操作无法撤销。"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
+msgctxt "@text"
+msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
+msgstr "为了改善打印质量和用户体验，Ultimaker Cura 会收集匿名数据，这些数据包括："
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
-msgctxt "@dialog:title"
-msgid "Restore Backup"
-msgstr "恢复备份"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
+msgctxt "@text"
+msgid "Machine types"
+msgstr "机器类型"
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
-msgctxt "@dialog:info"
-msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
-msgstr "您需要重新启动 Cura 才能恢复备份。您要立即关闭 Cura 吗？"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
+msgctxt "@text"
+msgid "Material usage"
+msgstr "材料使用"
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/main.qml:25
-msgctxt "@title:window"
-msgid "Cura Backups"
-msgstr "Cura 备份"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
+msgctxt "@text"
+msgid "Number of slices"
+msgstr "切片数量"
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
-msgctxt "@title"
-msgid "My Backups"
-msgstr "我的备份"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
+msgctxt "@text"
+msgid "Print settings"
+msgstr "打印设置"
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
-msgctxt "@empty_state"
-msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
-msgstr "您目前没有任何备份。使用“立即备份”按钮创建一个备份。"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
+msgctxt "@text"
+msgid "Data collected by Ultimaker Cura will not contain any personal information."
+msgstr "Ultimaker Cura 收集的数据不会包含任何个人信息。"
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
-msgctxt "@backup_limit_info"
-msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
-msgstr "在预览阶段，将限制为 5 个可见备份。移除一个备份以查看更早的备份。"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
+msgctxt "@text"
+msgid "More information"
+msgstr "更多信息"
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
-msgctxt "@description"
-msgid "Backup and synchronize your Cura settings."
-msgstr "备份并同步您的 Cura 设置。"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+msgctxt "@label"
+msgid "Empty"
+msgstr "空"
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
 msgctxt "@label"
-msgid "Color scheme"
-msgstr "颜色方案"
+msgid "User Agreement"
+msgstr "用户协议"
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:107
-msgctxt "@label:listbox"
-msgid "Material Color"
-msgstr "材料颜色"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
+msgctxt "@button"
+msgid "Decline and close"
+msgstr "拒绝并关闭"
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:111
-msgctxt "@label:listbox"
-msgid "Line Type"
-msgstr "走线类型"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:29
+msgctxt "@label"
+msgid "Welcome to Ultimaker Cura"
+msgstr "欢迎使用 Ultimaker Cura"
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:115
-msgctxt "@label:listbox"
-msgid "Feedrate"
-msgstr "进给速度"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:47
+msgctxt "@text"
+msgid ""
+"Please follow these steps to set up\n"
+"Ultimaker Cura. This will only take a few moments."
+msgstr ""
+"请按照以下步骤设置\n"
+"Ultimaker Cura。此操作只需要几分钟时间。"
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:119
-msgctxt "@label:listbox"
-msgid "Layer thickness"
-msgstr "层厚度"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:58
+msgctxt "@button"
+msgid "Get started"
+msgstr "开始"
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:156
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:24
 msgctxt "@label"
-msgid "Compatibility Mode"
-msgstr "兼容模式"
+msgid "What's new in Ultimaker Cura"
+msgstr "Ultimaker Cura 新增功能"
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:230
-msgctxt "@label"
-msgid "Travels"
-msgstr "空驶"
+#: ModelChecker/plugin.json
+msgctxt "description"
+msgid "Checks models and print configuration for possible printing issues and give suggestions."
+msgstr "检查模型和打印配置，以了解潜在的打印问题并给出建议。"
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:236
-msgctxt "@label"
-msgid "Helpers"
-msgstr "打印辅助结构"
+#: ModelChecker/plugin.json
+msgctxt "name"
+msgid "Model Checker"
+msgstr "模型检查器"
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:242
-msgctxt "@label"
-msgid "Shell"
-msgstr "外壳"
+#: 3MFReader/plugin.json
+msgctxt "description"
+msgid "Provides support for reading 3MF files."
+msgstr "提供对读取 3MF 格式文件的支持。"
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:298
-msgctxt "@label"
-msgid "Only Show Top Layers"
-msgstr "只显示顶层"
+#: 3MFReader/plugin.json
+msgctxt "name"
+msgid "3MF Reader"
+msgstr "3MF 读取器"
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:308
-msgctxt "@label"
-msgid "Show 5 Detailed Layers On Top"
-msgstr "在顶部显示 5 层打印细节"
+#: 3MFWriter/plugin.json
+msgctxt "description"
+msgid "Provides support for writing 3MF files."
+msgstr "提供对写入 3MF 文件的支持。"
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322
-msgctxt "@label"
-msgid "Top / Bottom"
-msgstr "顶 / 底层"
+#: 3MFWriter/plugin.json
+msgctxt "name"
+msgid "3MF Writer"
+msgstr "3MF 写入器"
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:326
-msgctxt "@label"
-msgid "Inner Wall"
-msgstr "内壁"
+#: AMFReader/plugin.json
+msgctxt "description"
+msgid "Provides support for reading AMF files."
+msgstr "提供对读取 AMF 文件的支持。"
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:384
-msgctxt "@label"
-msgid "min"
-msgstr "最小"
+#: AMFReader/plugin.json
+msgctxt "name"
+msgid "AMF Reader"
+msgstr "AMF 读取器"
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:433
-msgctxt "@label"
-msgid "max"
-msgstr "最大"
+#: CuraDrive/plugin.json
+msgctxt "description"
+msgid "Backup and restore your configuration."
+msgstr "备份和还原配置。"
 
-#: /home/ruben/Projects/Cura/plugins/ModelChecker/ModelChecker.qml:22
-msgctxt "@info:tooltip"
-msgid "Some things could be problematic in this print. Click to see tips for adjustment."
-msgstr "此次打印可能出现了某些问题。点击查看调整提示。"
+#: CuraDrive/plugin.json
+msgctxt "name"
+msgid "Cura Backups"
+msgstr "Cura 备份"
+
+#: CuraEngineBackend/plugin.json
+msgctxt "description"
+msgid "Provides the link to the CuraEngine slicing backend."
+msgstr "提供 CuraEngine 切片后端的路径。"
+
+#: CuraEngineBackend/plugin.json
+msgctxt "name"
+msgid "CuraEngine Backend"
+msgstr "CuraEngine 后端"
 
 #: CuraProfileReader/plugin.json
 msgctxt "description"
@@ -5058,125 +5144,125 @@ msgctxt "name"
 msgid "Cura Profile Reader"
 msgstr "Cura 配置文件读取器"
 
-#: SliceInfoPlugin/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "description"
-msgid "Submits anonymous slice info. Can be disabled through preferences."
-msgstr "提交匿名切片信息。 可以通过偏好设置禁用。"
+msgid "Provides support for exporting Cura profiles."
+msgstr "提供了对导出 Cura 配置文件的支持。"
 
-#: SliceInfoPlugin/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "name"
-msgid "Slice info"
-msgstr "切片信息"
+msgid "Cura Profile Writer"
+msgstr "Cura 配置文件写入器"
 
-#: ImageReader/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "description"
-msgid "Enables ability to generate printable geometry from 2D image files."
-msgstr "支持从 2D 图像文件生成可打印几何模型的能力。"
+msgid "Checks for firmware updates."
+msgstr "检查以进行固件更新。"
 
-#: ImageReader/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "name"
-msgid "Image Reader"
-msgstr "图像读取器"
+msgid "Firmware Update Checker"
+msgstr "固件更新检查程序"
 
-#: MachineSettingsAction/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "description"
-msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
-msgstr "提供一种改变机器设置的方法（如构建体积、喷嘴大小等）。"
+msgid "Provides a machine actions for updating firmware."
+msgstr "为固件更新提供操作选项。"
 
-#: MachineSettingsAction/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "name"
-msgid "Machine Settings action"
-msgstr "打印机设置操作"
+msgid "Firmware Updater"
+msgstr "固件更新程序"
 
-#: RemovableDriveOutputDevice/plugin.json
+#: GCodeGzReader/plugin.json
 msgctxt "description"
-msgid "Provides removable drive hotplugging and writing support."
-msgstr "提供可移动磁盘热插拔和写入文件的支持。"
+msgid "Reads g-code from a compressed archive."
+msgstr "从压缩存档文件读取 G-code。"
 
-#: RemovableDriveOutputDevice/plugin.json
+#: GCodeGzReader/plugin.json
 msgctxt "name"
-msgid "Removable Drive Output Device Plugin"
-msgstr "可移动磁盘输出设备插件"
+msgid "Compressed G-code Reader"
+msgstr "压缩 G-code 读取器"
 
-#: Toolbox/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "description"
-msgid "Find, manage and install new Cura packages."
-msgstr "查找、管理和安装新的Cura包。"
+msgid "Writes g-code to a compressed archive."
+msgstr "将 G-code 写入至压缩存档文件。"
 
-#: Toolbox/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "name"
-msgid "Toolbox"
-msgstr "工具箱"
+msgid "Compressed G-code Writer"
+msgstr "压缩 G-code 写入器"
 
-#: AMFReader/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "description"
-msgid "Provides support for reading AMF files."
-msgstr "提供对读取 AMF 文件的支持。"
+msgid "Provides support for importing profiles from g-code files."
+msgstr "提供了从 GCode 文件中导入配置文件的支持。"
 
-#: AMFReader/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "name"
-msgid "AMF Reader"
-msgstr "AMF 读取器"
+msgid "G-code Profile Reader"
+msgstr "G-code 配置文件读取器"
 
-#: SolidView/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "description"
-msgid "Provides a normal solid mesh view."
-msgstr "提供一个基本的实体网格视图。"
+msgid "Allows loading and displaying G-code files."
+msgstr "允许加载和显示 G-code 文件。"
 
-#: SolidView/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "name"
-msgid "Solid View"
-msgstr "实体视图"
+msgid "G-code Reader"
+msgstr "G-code 读取器"
 
-#: UltimakerMachineActions/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "description"
-msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
-msgstr "为最后的机器提供机器操作（例如，热床调平向导，选择升级等）。"
+msgid "Writes g-code to a file."
+msgstr "将 G-code 写入至文件。"
 
-#: UltimakerMachineActions/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "name"
-msgid "Ultimaker machine actions"
-msgstr "Ultimaker 打印机操作"
+msgid "G-code Writer"
+msgstr "G-code 写入器"
 
-#: USBPrinting/plugin.json
+#: ImageReader/plugin.json
 msgctxt "description"
-msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
-msgstr "接受 G-Code 并将其发送到一台打印机。 插件也可以更新固件。"
+msgid "Enables ability to generate printable geometry from 2D image files."
+msgstr "支持从 2D 图像文件生成可打印几何模型的能力。"
 
-#: USBPrinting/plugin.json
+#: ImageReader/plugin.json
 msgctxt "name"
-msgid "USB printing"
-msgstr "USB 联机打印"
+msgid "Image Reader"
+msgstr "图像读取器"
 
-#: UM3NetworkPrinting/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "description"
-msgid "Manages network connections to Ultimaker networked printers."
-msgstr "管理与 Ultimaker 网络打印机的网络连接。"
+msgid "Provides support for importing profiles from legacy Cura versions."
+msgstr "支持从 Cura 旧版本导入配置文件。"
 
-#: UM3NetworkPrinting/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "name"
-msgid "Ultimaker Network Connection"
-msgstr "Ultimaker 网络连接"
+msgid "Legacy Cura Profile Reader"
+msgstr "旧版 Cura 配置文件读取器"
 
-#: 3MFReader/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "description"
-msgid "Provides support for reading 3MF files."
-msgstr "提供对读取 3MF 格式文件的支持。"
+msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
+msgstr "提供一种改变机器设置的方法（如构建体积、喷嘴大小等）。"
 
-#: 3MFReader/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "name"
-msgid "3MF Reader"
-msgstr "3MF 读取器"
+msgid "Machine Settings Action"
+msgstr ""
 
-#: SupportEraser/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "description"
-msgid "Creates an eraser mesh to block the printing of support in certain places"
-msgstr "创建橡皮擦网格，以便阻止在某些位置打印支撑"
+msgid "Provides a monitor stage in Cura."
+msgstr "在 Cura 中提供监视阶段。"
 
-#: SupportEraser/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "name"
-msgid "Support Eraser"
-msgstr "支持橡皮擦"
+msgid "Monitor Stage"
+msgstr "监视阶段"
 
 #: PerObjectSettingsTool/plugin.json
 msgctxt "description"
@@ -5188,6 +5274,26 @@ msgctxt "name"
 msgid "Per Model Settings Tool"
 msgstr "单一模型设置工具"
 
+#: PostProcessingPlugin/plugin.json
+msgctxt "description"
+msgid "Extension that allows for user created scripts for post processing"
+msgstr "扩展程序（允许用户创建脚本进行后期处理）"
+
+#: PostProcessingPlugin/plugin.json
+msgctxt "name"
+msgid "Post Processing"
+msgstr "后期处理"
+
+#: PrepareStage/plugin.json
+msgctxt "description"
+msgid "Provides a prepare stage in Cura."
+msgstr "在 Cura 中提供准备阶段。"
+
+#: PrepareStage/plugin.json
+msgctxt "name"
+msgid "Prepare Stage"
+msgstr "准备阶段"
+
 #: PreviewStage/plugin.json
 msgctxt "description"
 msgid "Provides a preview stage in Cura."
@@ -5198,95 +5304,145 @@ msgctxt "name"
 msgid "Preview Stage"
 msgstr "预览阶段"
 
-#: XRayView/plugin.json
+#: RemovableDriveOutputDevice/plugin.json
 msgctxt "description"
-msgid "Provides the X-Ray view."
-msgstr "提供透视视图。"
+msgid "Provides removable drive hotplugging and writing support."
+msgstr "提供可移动磁盘热插拔和写入文件的支持。"
 
-#: XRayView/plugin.json
+#: RemovableDriveOutputDevice/plugin.json
 msgctxt "name"
-msgid "X-Ray View"
-msgstr "透视视图"
+msgid "Removable Drive Output Device Plugin"
+msgstr "可移动磁盘输出设备插件"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
-msgstr "将配置从 Cura 3.5 版本升级至 4.0 版本。"
+msgid "Logs certain events so that they can be used by the crash reporter"
+msgstr "记录某些事件，以使其可供崩溃报告器使用"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.5 to 4.0"
-msgstr "版本自 3.5 升级到 4.0"
+msgid "Sentry Logger"
+msgstr "Sentry 日志记录"
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: SimulationView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
-msgstr "将配置从 Cura 2.6 版本升级至 2.7 版本。"
+msgid "Provides the Simulation view."
+msgstr "提供仿真视图。"
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: SimulationView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.6 to 2.7"
-msgstr "版本自 2.6 升级到 2.7"
+msgid "Simulation View"
+msgstr "仿真视图"
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
-msgstr "将配置从 Cura 2.1 版本升级至 2.2 版本。"
+msgid "Submits anonymous slice info. Can be disabled through preferences."
+msgstr "提交匿名切片信息。 可以通过偏好设置禁用。"
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.1 to 2.2"
-msgstr "版本自 2.1 升级到 2.2"
+msgid "Slice info"
+msgstr "切片信息"
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: SolidView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
-msgstr "将配置从 Cura 3.4 版本升级至 3.5 版本。"
+msgid "Provides a normal solid mesh view."
+msgstr "提供一个基本的实体网格视图。"
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: SolidView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.4 to 3.5"
-msgstr "版本自 3.4 升级到 3.5"
+msgid "Solid View"
+msgstr "实体视图"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
-msgstr "将配置从 Cura 4.4 升级至 Cura 4.5。"
+msgid "Creates an eraser mesh to block the printing of support in certain places"
+msgstr "创建橡皮擦网格，以便阻止在某些位置打印支撑"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.4 to 4.5"
-msgstr "版本从 4.4 升级至 4.5"
+msgid "Support Eraser"
+msgstr "支持橡皮擦"
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: Toolbox/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
-msgstr "从Cura 3.3升级到Cura 3.4。"
+msgid "Find, manage and install new Cura packages."
+msgstr "查找、管理和安装新的Cura包。"
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: Toolbox/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.3 to 3.4"
-msgstr "版本升级3.3到3.4"
+msgid "Toolbox"
+msgstr "工具箱"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
-msgstr "将配置从 Cura 3.0 版本升级至 3.1 版本。"
+msgid "Provides support for reading model files."
+msgstr "提供对读取模型文件的支持。"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.0 to 3.1"
-msgstr "版本自 3.0 升级到 3.1"
+msgid "Trimesh Reader"
+msgstr "Trimesh 阅读器"
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: UFPReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
-msgstr "将配置从 Cura 3.2 版本升级至 3.3 版本。"
+msgid "Provides support for reading Ultimaker Format Packages."
+msgstr "支持读取 Ultimaker 格式包。"
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: UFPReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.2 to 3.3"
-msgstr "版本自 3.2 升级到 3.3"
+msgid "UFP Reader"
+msgstr "UFP 读取器"
+
+#: UFPWriter/plugin.json
+msgctxt "description"
+msgid "Provides support for writing Ultimaker Format Packages."
+msgstr "支持写入 Ultimaker 格式包。"
+
+#: UFPWriter/plugin.json
+msgctxt "name"
+msgid "UFP Writer"
+msgstr "UFP 写入器"
+
+#: UltimakerMachineActions/plugin.json
+msgctxt "description"
+msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
+msgstr "为最后的机器提供机器操作（例如，热床调平向导，选择升级等）。"
+
+#: UltimakerMachineActions/plugin.json
+msgctxt "name"
+msgid "Ultimaker machine actions"
+msgstr "Ultimaker 打印机操作"
+
+#: UM3NetworkPrinting/plugin.json
+msgctxt "description"
+msgid "Manages network connections to Ultimaker networked printers."
+msgstr "管理与 Ultimaker 网络打印机的网络连接。"
+
+#: UM3NetworkPrinting/plugin.json
+msgctxt "name"
+msgid "Ultimaker Network Connection"
+msgstr "Ultimaker 网络连接"
+
+#: USBPrinting/plugin.json
+msgctxt "description"
+msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
+msgstr "接受 G-Code 并将其发送到一台打印机。 插件也可以更新固件。"
+
+#: USBPrinting/plugin.json
+msgctxt "name"
+msgid "USB printing"
+msgstr "USB 联机打印"
+
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
+msgstr "将配置从 Cura 2.1 版本升级至 2.2 版本。"
+
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 2.1 to 2.2"
+msgstr "版本自 2.1 升级到 2.2"
 
 #: VersionUpgrade/VersionUpgrade22to24/plugin.json
 msgctxt "description"
@@ -5308,15 +5464,15 @@ msgctxt "name"
 msgid "Version Upgrade 2.5 to 2.6"
 msgstr "版本自 2.5 升级到 2.6"
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
-msgstr "将配置从 Cura 4.3 升级至 Cura 4.4。"
+msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
+msgstr "将配置从 Cura 2.6 版本升级至 2.7 版本。"
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.3 to 4.4"
-msgstr "版本自 4.3 升级至 4.4"
+msgid "Version Upgrade 2.6 to 2.7"
+msgstr "版本自 2.6 升级到 2.7"
 
 #: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "description"
@@ -5328,165 +5484,125 @@ msgctxt "name"
 msgid "Version Upgrade 2.7 to 3.0"
 msgstr "版本自 2.7 升级到 3.0"
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
-msgstr "将配置从 Cura 4.0 版本升级至 4.1 版本。"
-
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.0 to 4.1"
-msgstr "版本自 4.0 升级到 4.1"
-
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
-msgstr "请将配置从 Cura 4.2 升级至 Cura 4.3。"
-
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.2 to 4.3"
-msgstr "版本自 4.2 升级至 4.3"
-
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
-msgstr "请将配置从 Cura 4.1 升级至 Cura 4.2。"
-
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.1 to 4.2"
-msgstr "版本自 4.1 升级到 4.2"
-
-#: GCodeReader/plugin.json
-msgctxt "description"
-msgid "Allows loading and displaying G-code files."
-msgstr "允许加载和显示 G-code 文件。"
-
-#: GCodeReader/plugin.json
-msgctxt "name"
-msgid "G-code Reader"
-msgstr "G-code 读取器"
-
-#: PostProcessingPlugin/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "description"
-msgid "Extension that allows for user created scripts for post processing"
-msgstr "扩展程序（允许用户创建脚本进行后期处理）"
+msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
+msgstr "将配置从 Cura 3.0 版本升级至 3.1 版本。"
 
-#: PostProcessingPlugin/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "name"
-msgid "Post Processing"
-msgstr "后期处理"
+msgid "Version Upgrade 3.0 to 3.1"
+msgstr "版本自 3.0 升级到 3.1"
 
-#: CuraEngineBackend/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "description"
-msgid "Provides the link to the CuraEngine slicing backend."
-msgstr "提供 CuraEngine 切片后端的路径。"
+msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
+msgstr "将配置从 Cura 3.2 版本升级至 3.3 版本。"
 
-#: CuraEngineBackend/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "name"
-msgid "CuraEngine Backend"
-msgstr "CuraEngine 后端"
+msgid "Version Upgrade 3.2 to 3.3"
+msgstr "版本自 3.2 升级到 3.3"
 
-#: LegacyProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from legacy Cura versions."
-msgstr "支持从 Cura 旧版本导入配置文件。"
+msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
+msgstr "从Cura 3.3升级到Cura 3.4。"
 
-#: LegacyProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "name"
-msgid "Legacy Cura Profile Reader"
-msgstr "旧版 Cura 配置文件读取器"
+msgid "Version Upgrade 3.3 to 3.4"
+msgstr "版本升级3.3到3.4"
 
-#: UFPReader/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "description"
-msgid "Provides support for reading Ultimaker Format Packages."
-msgstr "支持读取 Ultimaker 格式包。"
+msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
+msgstr "将配置从 Cura 3.4 版本升级至 3.5 版本。"
 
-#: UFPReader/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "name"
-msgid "UFP Reader"
-msgstr "UFP 读取器"
+msgid "Version Upgrade 3.4 to 3.5"
+msgstr "版本自 3.4 升级到 3.5"
 
-#: GCodeProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from g-code files."
-msgstr "提供了从 GCode 文件中导入配置文件的支持。"
+msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
+msgstr "将配置从 Cura 3.5 版本升级至 4.0 版本。"
 
-#: GCodeProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
 msgctxt "name"
-msgid "G-code Profile Reader"
-msgstr "G-code 配置文件读取器"
+msgid "Version Upgrade 3.5 to 4.0"
+msgstr "版本自 3.5 升级到 4.0"
 
-#: CuraProfileWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "description"
-msgid "Provides support for exporting Cura profiles."
-msgstr "提供了对导出 Cura 配置文件的支持。"
+msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
+msgstr "将配置从 Cura 4.0 版本升级至 4.1 版本。"
 
-#: CuraProfileWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "name"
-msgid "Cura Profile Writer"
-msgstr "Cura 配置文件写入器"
+msgid "Version Upgrade 4.0 to 4.1"
+msgstr "版本自 4.0 升级到 4.1"
 
-#: FirmwareUpdater/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "description"
-msgid "Provides a machine actions for updating firmware."
-msgstr "为固件更新提供操作选项。"
+msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
+msgstr "请将配置从 Cura 4.1 升级至 Cura 4.2。"
 
-#: FirmwareUpdater/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "name"
-msgid "Firmware Updater"
-msgstr "固件更新程序"
+msgid "Version Upgrade 4.1 to 4.2"
+msgstr "版本自 4.1 升级到 4.2"
 
-#: PrepareStage/plugin.json
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
 msgctxt "description"
-msgid "Provides a prepare stage in Cura."
-msgstr "在 Cura 中提供准备阶段。"
+msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
+msgstr "请将配置从 Cura 4.2 升级至 Cura 4.3。"
 
-#: PrepareStage/plugin.json
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
 msgctxt "name"
-msgid "Prepare Stage"
-msgstr "准备阶段"
+msgid "Version Upgrade 4.2 to 4.3"
+msgstr "版本自 4.2 升级至 4.3"
 
-#: TrimeshReader/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "description"
-msgid "Provides support for reading model files."
-msgstr "提供对读取模型文件的支持。"
+msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
+msgstr "将配置从 Cura 4.3 升级至 Cura 4.4。"
 
-#: TrimeshReader/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "name"
-msgid "Trimesh Reader"
-msgstr "Trimesh 阅读器"
+msgid "Version Upgrade 4.3 to 4.4"
+msgstr "版本自 4.3 升级至 4.4"
 
-#: 3MFWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "description"
-msgid "Provides support for writing 3MF files."
-msgstr "提供对写入 3MF 文件的支持。"
+msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
+msgstr "将配置从 Cura 4.4 升级至 Cura 4.5。"
 
-#: 3MFWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "name"
-msgid "3MF Writer"
-msgstr "3MF 写入器"
+msgid "Version Upgrade 4.4 to 4.5"
+msgstr "版本从 4.4 升级至 4.5"
 
-#: GCodeWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a file."
-msgstr "将 G-code 写入至文件。"
+msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
+msgstr ""
 
-#: GCodeWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "name"
-msgid "G-code Writer"
-msgstr "G-code 写入器"
+msgid "Version Upgrade 4.5 to 4.6"
+msgstr ""
 
-#: MonitorStage/plugin.json
+#: X3DReader/plugin.json
 msgctxt "description"
-msgid "Provides a monitor stage in Cura."
-msgstr "在 Cura 中提供监视阶段。"
+msgid "Provides support for reading X3D files."
+msgstr "支持读取 X3D 文件。"
 
-#: MonitorStage/plugin.json
+#: X3DReader/plugin.json
 msgctxt "name"
-msgid "Monitor Stage"
-msgstr "监视阶段"
+msgid "X3D Reader"
+msgstr "X3D 读取器"
 
 #: XmlMaterialProfile/plugin.json
 msgctxt "description"
@@ -5498,95 +5614,117 @@ msgctxt "name"
 msgid "Material Profiles"
 msgstr "材料配置文件"
 
-#: CuraDrive/plugin.json
+#: XRayView/plugin.json
 msgctxt "description"
-msgid "Backup and restore your configuration."
-msgstr "备份和还原配置。"
+msgid "Provides the X-Ray view."
+msgstr "提供透视视图。"
 
-#: CuraDrive/plugin.json
+#: XRayView/plugin.json
 msgctxt "name"
-msgid "Cura Backups"
-msgstr "Cura 备份"
+msgid "X-Ray View"
+msgstr "透视视图"
 
-#: X3DReader/plugin.json
-msgctxt "description"
-msgid "Provides support for reading X3D files."
-msgstr "支持读取 X3D 文件。"
+#~ msgctxt "@info:generic"
+#~ msgid ""
+#~ "\n"
+#~ "Do you want to sync material and software packages with your account?"
+#~ msgstr ""
+#~ "\n"
+#~ "是否要与您的帐户同步材料和软件包?"
 
-#: X3DReader/plugin.json
-msgctxt "name"
-msgid "X3D Reader"
-msgstr "X3D 读取器"
+#~ msgctxt "@info:generic"
+#~ msgid ""
+#~ "\n"
+#~ "Syncing..."
+#~ msgstr ""
+#~ "\n"
+#~ "正在同步..."
 
-#: SimulationView/plugin.json
-msgctxt "description"
-msgid "Provides the Simulation view."
-msgstr "提供仿真视图。"
+#~ msgctxt "@info:status"
+#~ msgid "Nothing to slice because none of the models fit the build volume or are assigned to a disabled extruder. Please scale or rotate models to fit, or enable an extruder."
+#~ msgstr "无法切片，因为没有一个模型适合成形空间体积或被分配至已禁用的挤出机。请缩放或旋转模型以匹配，或启用挤出机。"
 
-#: SimulationView/plugin.json
-msgctxt "name"
-msgid "Simulation View"
-msgstr "仿真视图"
+#~ msgctxt "@info:backup_status"
+#~ msgid "There was an error listing your backups."
+#~ msgstr "列出您的备份时出错。"
 
-#: GCodeGzReader/plugin.json
-msgctxt "description"
-msgid "Reads g-code from a compressed archive."
-msgstr "从压缩存档文件读取 G-code。"
+#~ msgctxt "@title:groupbox"
+#~ msgid "User description (Note: Developers may not speak your language, please use English if possible)"
+#~ msgstr "用户说明（注意：为避免开发人员可能不熟悉您的语言，请尽量使用英语）"
 
-#: GCodeGzReader/plugin.json
-msgctxt "name"
-msgid "Compressed G-code Reader"
-msgstr "压缩 G-code 读取器"
+#~ msgctxt "@title:window"
+#~ msgid "Closing Cura"
+#~ msgstr "关闭 Cura"
 
-#: UFPWriter/plugin.json
-msgctxt "description"
-msgid "Provides support for writing Ultimaker Format Packages."
-msgstr "支持写入 Ultimaker 格式包。"
+#~ msgctxt "@label"
+#~ msgid "Are you sure you want to exit Cura?"
+#~ msgstr "您确定要退出 Cura 吗？"
 
-#: UFPWriter/plugin.json
-msgctxt "name"
-msgid "UFP Writer"
-msgstr "UFP 写入器"
+#~ msgctxt "@label"
+#~ msgid "Language:"
+#~ msgstr "语言："
 
-#: ModelChecker/plugin.json
-msgctxt "description"
-msgid "Checks models and print configuration for possible printing issues and give suggestions."
-msgstr "检查模型和打印配置，以了解潜在的打印问题并给出建议。"
+#~ msgctxt "@label"
+#~ msgid "Ultimaker Cloud"
+#~ msgstr "Ultimaker Cloud"
 
-#: ModelChecker/plugin.json
-msgctxt "name"
-msgid "Model Checker"
-msgstr "模型检查器"
+#~ msgctxt "@text"
+#~ msgid "The next generation 3D printing workflow"
+#~ msgstr "下一代 3D 打印工作流程"
 
-#: SentryLogger/plugin.json
-msgctxt "description"
-msgid "Logs certain events so that they can be used by the crash reporter"
-msgstr "记录某些事件，以使其可供崩溃报告器使用"
+#~ msgctxt "@text"
+#~ msgid "- Send print jobs to Ultimaker printers outside your local network"
+#~ msgstr "- 将打印作业发送到局域网外的 Ultimaker 打印机"
 
-#: SentryLogger/plugin.json
-msgctxt "name"
-msgid "Sentry Logger"
-msgstr "Sentry 日志记录"
+#~ msgctxt "@text"
+#~ msgid "- Store your Ultimaker Cura settings in the cloud for use anywhere"
+#~ msgstr "- 将 Ultimaker Cura 设置存储到云以便在任何地方使用"
 
-#: GCodeGzWriter/plugin.json
-msgctxt "description"
-msgid "Writes g-code to a compressed archive."
-msgstr "将 G-code 写入至压缩存档文件。"
+#~ msgctxt "@text"
+#~ msgid "- Get exclusive access to print profiles from leading brands"
+#~ msgstr "- 获得来自领先品牌的打印配置文件的独家访问权限"
 
-#: GCodeGzWriter/plugin.json
-msgctxt "name"
-msgid "Compressed G-code Writer"
-msgstr "压缩 G-code 写入器"
+#~ msgctxt "@label"
+#~ msgid "The value is resolved from per-extruder values "
+#~ msgstr "该值将会根据每一个挤出机的设置而确定 "
 
-#: FirmwareUpdateChecker/plugin.json
-msgctxt "description"
-msgid "Checks for firmware updates."
-msgstr "检查以进行固件更新。"
+#~ msgctxt "@label"
+#~ msgid "The next generation 3D printing workflow"
+#~ msgstr "下一代 3D 打印工作流程"
 
-#: FirmwareUpdateChecker/plugin.json
-msgctxt "name"
-msgid "Firmware Update Checker"
-msgstr "固件更新检查程序"
+#~ msgctxt "@text"
+#~ msgid ""
+#~ "- Send print jobs to Ultimaker printers outside your local network\n"
+#~ "- Store your Ultimaker Cura settings in the cloud for use anywhere\n"
+#~ "- Get exclusive access to print profiles from leading brands"
+#~ msgstr ""
+#~ "- 将打印作业发送到局域网外的 Ultimaker 打印机\n"
+#~ "- 将 Ultimaker Cura 设置存储到云以便在任何地方使用\n"
+#~ "- 获得来自领先品牌的打印配置文件的独家访问权限"
+
+#~ msgctxt "@title:window"
+#~ msgid "About "
+#~ msgstr "关于 "
+
+#~ msgctxt "@info:button"
+#~ msgid "Quit Cura"
+#~ msgstr "退出 Cura"
+
+#~ msgctxt "@action:checkbox"
+#~ msgid "Infill only"
+#~ msgstr "仅填充"
+
+#~ msgctxt "@info:tooltip"
+#~ msgid "Change active post-processing scripts"
+#~ msgstr "更改目前启用的后期处理脚本"
+
+#~ msgctxt "@label:listbox"
+#~ msgid "Feedrate"
+#~ msgstr "进给速度"
+
+#~ msgctxt "name"
+#~ msgid "Machine Settings action"
+#~ msgstr "打印机设置操作"
 
 #~ msgctxt "@info:title"
 #~ msgid "New cloud printers found"
@@ -5596,10 +5734,6 @@ msgstr "固件更新检查程序"
 #~ msgid "New printers have been found connected to your account, you can find them in your list of discovered printers."
 #~ msgstr "发现有新打印机连接到您的帐户。您可以在已发现的打印机列表中查找新连接的打印机。"
 
-msgctxt "@info:option_text"
-msgid "Do not show this message again"
-msgstr "不再显示此消息"
-
 #~ msgctxt "@info:status"
 #~ msgid "Cura does not accurately display layers when Wire Printing is enabled"
 #~ msgstr "当单线打印（Wire Printing）功能开启时，Cura 将无法准确地显示打印层（Layers）"
diff --git a/resources/i18n/zh_CN/fdmextruder.def.json.po b/resources/i18n/zh_CN/fdmextruder.def.json.po
index 891421fd55..646edf0e0f 100644
--- a/resources/i18n/zh_CN/fdmextruder.def.json.po
+++ b/resources/i18n/zh_CN/fdmextruder.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.5\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-02-07 14:19+0000\n"
+"POT-Creation-Date: 2020-04-06 16:33+0000\n"
 "PO-Revision-Date: 2019-03-13 14:00+0200\n"
 "Last-Translator: Bothof <info@bothof.nl>\n"
 "Language-Team: PCDotFan <pc@edu.ax>, Bothof <info@bothof.nl>\n"
diff --git a/resources/i18n/zh_CN/fdmprinter.def.json.po b/resources/i18n/zh_CN/fdmprinter.def.json.po
index c93bade146..382e761794 100644
--- a/resources/i18n/zh_CN/fdmprinter.def.json.po
+++ b/resources/i18n/zh_CN/fdmprinter.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.5\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-02-07 14:19+0000\n"
+"POT-Creation-Date: 2020-04-06 16:33+0000\n"
 "PO-Revision-Date: 2019-09-23 14:18+0200\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Chinese <info@lionbridge.com>, PCDotFan <pc@edu.ax>, Chinese <info@bothof.nl>\n"
@@ -82,8 +82,8 @@ msgstr "材料 GUID"
 
 #: fdmprinter.def.json
 msgctxt "material_guid description"
-msgid "GUID of the material. This is set automatically. "
-msgstr "材料 GUID，此项为自动设置。 "
+msgid "GUID of the material. This is set automatically."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "material_diameter label"
@@ -296,16 +296,6 @@ msgid "The distance from the tip of the nozzle in which heat from the nozzle is
 msgstr "与喷嘴尖端的距离，喷嘴产生的热量在这段距离内传递到耗材中。"
 
 #: fdmprinter.def.json
-msgctxt "machine_filament_park_distance label"
-msgid "Filament Park Distance"
-msgstr "耗材停放距离"
-
-#: fdmprinter.def.json
-msgctxt "machine_filament_park_distance description"
-msgid "The distance from the tip of the nozzle where to park the filament when an extruder is no longer used."
-msgstr "与喷嘴尖端的距离，当不再使用挤出机时会将耗材停放在此区域。"
-
-#: fdmprinter.def.json
 msgctxt "machine_nozzle_temp_enabled label"
 msgid "Enable Nozzle Temperature Control"
 msgstr "启用喷嘴温度控制"
@@ -1261,6 +1251,16 @@ msgid "Amount of offset applied to all polygons in the first layer. A negative v
 msgstr "应用到第一层所有多边形的偏移量。 负数值可以补偿第一层的压扁量（被称为“象脚”）。"
 
 #: fdmprinter.def.json
+msgctxt "hole_xy_offset label"
+msgid "Hole Horizontal Expansion"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "hole_xy_offset description"
+msgid "Amount of offset applied to all holes in each layer. Positive values increase the size of the holes, negative values reduce the size of the holes."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "z_seam_type label"
 msgid "Z Seam Alignment"
 msgstr "Z 缝对齐"
@@ -2191,8 +2191,8 @@ msgstr "冲洗清除速度"
 
 #: fdmprinter.def.json
 msgctxt "material_flush_purge_speed description"
-msgid "Material Station internal value"
-msgstr "Material Station 内部值"
+msgid "How fast to prime the material after switching to a different material."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "material_flush_purge_length label"
@@ -2201,28 +2201,28 @@ msgstr "冲洗清除长度"
 
 #: fdmprinter.def.json
 msgctxt "material_flush_purge_length description"
-msgid "Material Station internal value"
-msgstr "Material Station 内部值"
+msgid "How much material to use to purge the previous material out of the nozzle (in length of filament) when switching to a different material."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "material_end_of_filament_purge_speed label"
-msgid "End Of Filament Purge Speed"
-msgstr "线末清除速度"
+msgid "End of Filament Purge Speed"
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "material_end_of_filament_purge_speed description"
-msgid "Material Station internal value"
-msgstr "Material Station 内部值"
+msgid "How fast to prime the material after replacing an empty spool with a fresh spool of the same material."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "material_end_of_filament_purge_length label"
-msgid "End Of Filament Purge Length"
-msgstr "线末清除长度"
+msgid "End of Filament Purge Length"
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "material_end_of_filament_purge_length description"
-msgid "Material Station internal value"
-msgstr "Material Station 内部值"
+msgid "How much material to use to purge the previous material out of the nozzle (in length of filament) when replacing an empty spool with a fresh spool of the same material."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "material_maximum_park_duration label"
@@ -2231,8 +2231,8 @@ msgstr "最长停放持续时间"
 
 #: fdmprinter.def.json
 msgctxt "material_maximum_park_duration description"
-msgid "Material Station internal value"
-msgstr "Material Station 内部值"
+msgid "How long the material can be kept out of dry storage safely."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "material_no_load_move_factor label"
@@ -2241,8 +2241,8 @@ msgstr "空载移动系数"
 
 #: fdmprinter.def.json
 msgctxt "material_no_load_move_factor description"
-msgid "Material Station internal value"
-msgstr "Material Station 内部值"
+msgid "A factor indicating how much the filament gets compressed between the feeder and the nozzle chamber, used to determine how far to move the material for a filament switch."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "material_flow label"
@@ -3021,8 +3021,8 @@ msgstr "启用回抽"
 
 #: fdmprinter.def.json
 msgctxt "retraction_enable description"
-msgid "Retract the filament when the nozzle is moving over a non-printed area. "
-msgstr "当喷嘴移动到非打印区域上方时回抽耗材。 "
+msgid "Retract the filament when the nozzle is moving over a non-printed area."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "retract_at_layer_change label"
@@ -3716,8 +3716,8 @@ msgstr "最小支撑 X/Y 距离"
 
 #: fdmprinter.def.json
 msgctxt "support_xy_distance_overhang description"
-msgid "Distance of the support structure from the overhang in the X/Y directions. "
-msgstr "支撑结构在 X/Y 方向距悬垂的距离。 "
+msgid "Distance of the support structure from the overhang in the X/Y directions."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "support_bottom_stair_step_height label"
@@ -4815,8 +4815,8 @@ msgstr "网格修复"
 
 #: fdmprinter.def.json
 msgctxt "meshfix description"
-msgid "category_fixes"
-msgstr "category_fixes"
+msgid "Make the meshes more suited for 3D printing."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "meshfix_union_all label"
@@ -4935,8 +4935,8 @@ msgstr "特殊模式"
 
 #: fdmprinter.def.json
 msgctxt "blackmagic description"
-msgid "category_blackmagic"
-msgstr "category_blackmagic"
+msgid "Non-traditional ways to print your models."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "print_sequence label"
@@ -5110,8 +5110,8 @@ msgstr "实验性"
 
 #: fdmprinter.def.json
 msgctxt "experimental description"
-msgid "experimental!"
-msgstr "实验性！"
+msgid "Features that haven't completely been fleshed out yet."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "support_tree_enable label"
@@ -6392,6 +6392,70 @@ msgctxt "mesh_rotation_matrix description"
 msgid "Transformation matrix to be applied to the model when loading it from file."
 msgstr "在将模型从文件中载入时应用在模型上的转换矩阵。"
 
+#~ msgctxt "material_guid description"
+#~ msgid "GUID of the material. This is set automatically. "
+#~ msgstr "材料 GUID，此项为自动设置。 "
+
+#~ msgctxt "machine_filament_park_distance label"
+#~ msgid "Filament Park Distance"
+#~ msgstr "耗材停放距离"
+
+#~ msgctxt "machine_filament_park_distance description"
+#~ msgid "The distance from the tip of the nozzle where to park the filament when an extruder is no longer used."
+#~ msgstr "与喷嘴尖端的距离，当不再使用挤出机时会将耗材停放在此区域。"
+
+#~ msgctxt "material_flush_purge_speed description"
+#~ msgid "Material Station internal value"
+#~ msgstr "Material Station 内部值"
+
+#~ msgctxt "material_flush_purge_length description"
+#~ msgid "Material Station internal value"
+#~ msgstr "Material Station 内部值"
+
+#~ msgctxt "material_end_of_filament_purge_speed label"
+#~ msgid "End Of Filament Purge Speed"
+#~ msgstr "线末清除速度"
+
+#~ msgctxt "material_end_of_filament_purge_speed description"
+#~ msgid "Material Station internal value"
+#~ msgstr "Material Station 内部值"
+
+#~ msgctxt "material_end_of_filament_purge_length label"
+#~ msgid "End Of Filament Purge Length"
+#~ msgstr "线末清除长度"
+
+#~ msgctxt "material_end_of_filament_purge_length description"
+#~ msgid "Material Station internal value"
+#~ msgstr "Material Station 内部值"
+
+#~ msgctxt "material_maximum_park_duration description"
+#~ msgid "Material Station internal value"
+#~ msgstr "Material Station 内部值"
+
+#~ msgctxt "material_no_load_move_factor description"
+#~ msgid "Material Station internal value"
+#~ msgstr "Material Station 内部值"
+
+#~ msgctxt "retraction_enable description"
+#~ msgid "Retract the filament when the nozzle is moving over a non-printed area. "
+#~ msgstr "当喷嘴移动到非打印区域上方时回抽耗材。 "
+
+#~ msgctxt "support_xy_distance_overhang description"
+#~ msgid "Distance of the support structure from the overhang in the X/Y directions. "
+#~ msgstr "支撑结构在 X/Y 方向距悬垂的距离。 "
+
+#~ msgctxt "meshfix description"
+#~ msgid "category_fixes"
+#~ msgstr "category_fixes"
+
+#~ msgctxt "blackmagic description"
+#~ msgid "category_blackmagic"
+#~ msgstr "category_blackmagic"
+
+#~ msgctxt "experimental description"
+#~ msgid "experimental!"
+#~ msgstr "实验性！"
+
 #~ msgctxt "machine_head_polygon label"
 #~ msgid "Machine Head Polygon"
 #~ msgstr "机器头多边形"