Merge branch 'master' of github.com:Ultimaker/Cura into CURA-6522_one_at_a_time_overlapping_build_area

18 files changed, 459 insertions, 0 deletions

diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print_Quick.inst.cfg
new file mode 100644
index 0000000000..1e7e808355
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print_Quick.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+version = 4
+name = Quick
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 11
+type = intent
+intent_category = quick
+quality_type = draft
+material = generic_abs
+variant = AA 0.4
+
+[values]
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_layer_0 = 20
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 2
+fill_perimeter_gaps = nowhere
+infill_sparse_density = 15
+infill_line_width = =line_width
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+line_width = =machine_nozzle_size
+wall_line_width_x = =line_width
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print_Accurate.inst.cfg
new file mode 100644
index 0000000000..6aed5bf11a
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print_Accurate.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 11
+type = intent
+intent_category = engineering
+quality_type = fast
+material = generic_abs
+variant = AA 0.4
+
+[values]
+infill_line_width = =line_width
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+line_width = =machine_nozzle_size
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_line_width_x = =line_width
+wall_thickness = =line_width * 3
+xy_offset = =- layer_height * 0.2
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Visual.inst.cfg
new file mode 100644
index 0000000000..0f10b8416b
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Visual
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 10
+type = intent
+quality_type = fast
+intent_category = visual
+material = generic_abs
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+wall_thickness = =wall_line_width * 3
+top_bottom_thickness = =wall_thickness
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_High_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_High_Visual.inst.cfg
new file mode 100644
index 0000000000..b6ea956563
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_High_Visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Visual
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 10
+type = intent
+quality_type = high
+intent_category = visual
+material = generic_abs
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+wall_thickness = =wall_line_width * 3
+top_bottom_thickness = =wall_thickness
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg
new file mode 100644
index 0000000000..a141830f80
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 11
+type = intent
+intent_category = engineering
+quality_type = normal
+material = generic_abs
+variant = AA 0.4
+
+[values]
+infill_line_width = =line_width
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+line_width = =machine_nozzle_size
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_line_width_x = =line_width
+wall_thickness = =line_width * 3
+xy_offset = =- layer_height * 0.2
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Visual.inst.cfg
new file mode 100644
index 0000000000..f26003ca30
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Visual
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 10
+type = intent
+quality_type = normal
+intent_category = visual
+material = generic_abs
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+wall_thickness = =wall_line_width * 3
+top_bottom_thickness = =wall_thickness
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print_Quick.inst.cfg
new file mode 100644
index 0000000000..558a14dd4b
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print_Quick.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+version = 4
+name = Quick
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 11
+type = intent
+intent_category = quick
+quality_type = draft
+material = generic_pla
+variant = AA 0.4
+
+[values]
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_layer_0 = 20
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 2
+fill_perimeter_gaps = nowhere
+infill_sparse_density = 15
+infill_line_width = =line_width
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+line_width = =machine_nozzle_size
+wall_line_width_x = =line_width
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print_Accurate.inst.cfg
new file mode 100644
index 0000000000..d814866d39
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print_Accurate.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 11
+type = intent
+intent_category = engineering
+quality_type = fast
+material = generic_pla
+variant = AA 0.4
+
+[values]
+infill_line_width = =line_width
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+line_width = =machine_nozzle_size
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_line_width_x = =line_width
+wall_thickness = =line_width * 3
+xy_offset = =- layer_height * 0.2
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Visual.inst.cfg
new file mode 100644
index 0000000000..b20fdcb791
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Visual
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 10
+type = intent
+quality_type = fast
+intent_category = visual
+material = generic_pla
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+wall_thickness = =wall_line_width * 3
+top_bottom_thickness = =wall_thickness
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_High_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_High_Visual.inst.cfg
new file mode 100644
index 0000000000..3fc0006b3f
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_High_Visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Visual
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 10
+type = intent
+quality_type = high
+intent_category = visual
+material = generic_pla
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+wall_thickness = =wall_line_width * 3
+top_bottom_thickness = =wall_thickness
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg
new file mode 100644
index 0000000000..b22b6ff4c2
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 11
+type = intent
+intent_category = engineering
+quality_type = normal
+material = generic_pla
+variant = AA 0.4
+
+[values]
+infill_line_width = =line_width
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+line_width = =machine_nozzle_size
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_line_width_x = =line_width
+wall_thickness = =line_width * 3
+xy_offset = =- layer_height * 0.2
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Visual.inst.cfg
new file mode 100644
index 0000000000..4138f62694
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Visual
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 10
+type = intent
+quality_type = normal
+intent_category = visual
+material = generic_pla
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+wall_thickness = =wall_line_width * 3
+top_bottom_thickness = =wall_thickness
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print_Quick.inst.cfg
new file mode 100644
index 0000000000..d680a751a5
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print_Quick.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+version = 4
+name = Quick
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 11
+type = intent
+intent_category = quick
+quality_type = draft
+material = generic_tough_pla
+variant = AA 0.4
+
+[values]
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_layer_0 = 20
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 2
+fill_perimeter_gaps = nowhere
+infill_sparse_density = 15
+infill_line_width = =line_width
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+line_width = =machine_nozzle_size
+wall_line_width_x = =line_width
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg
new file mode 100644
index 0000000000..57ab6a727e
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 11
+type = intent
+intent_category = engineering
+quality_type = fast
+material = generic_tough_pla
+variant = AA 0.4
+
+[values]
+infill_line_width = =line_width
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+line_width = =machine_nozzle_size
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_line_width_x = =line_width
+wall_thickness = =line_width * 3
+xy_offset = =- layer_height * 0.2
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Visual.inst.cfg
new file mode 100644
index 0000000000..3f5d3c566e
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Visual
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 10
+type = intent
+quality_type = fast
+intent_category = visual
+material = generic_tough_pla
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+wall_thickness = =wall_line_width * 3
+top_bottom_thickness = =wall_thickness
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_High_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_High_Visual.inst.cfg
new file mode 100644
index 0000000000..3b5d9fb3db
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_High_Visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Visual
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 10
+type = intent
+quality_type = high
+intent_category = visual
+material = generic_tough_pla
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+wall_thickness = =wall_line_width * 3
+top_bottom_thickness = =wall_thickness
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg
new file mode 100644
index 0000000000..a5f878bf4f
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 11
+type = intent
+intent_category = engineering
+quality_type = normal
+material = generic_tough_pla
+variant = AA 0.4
+
+[values]
+infill_line_width = =line_width
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+line_width = =machine_nozzle_size
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_line_width_x = =line_width
+wall_thickness = =line_width * 3
+xy_offset = =- layer_height * 0.2
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Visual.inst.cfg
new file mode 100644
index 0000000000..d71bb76b35
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Visual
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 10
+type = intent
+quality_type = normal
+intent_category = visual
+material = generic_tough_pla
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+wall_thickness = =wall_line_width * 3
+top_bottom_thickness = =wall_thickness