UNI 3D Series printers

24 files changed, 594 insertions, 0 deletions

diff --git a/resources/intent/uni_base/abs/abs_nozzle_0.40_layer_0.10_visual.inst.inst.cfg b/resources/intent/uni_base/abs/abs_nozzle_0.40_layer_0.10_visual.inst.inst.cfg
new file mode 100644
index 0000000000..9932b69f2a
--- /dev/null
+++ b/resources/intent/uni_base/abs/abs_nozzle_0.40_layer_0.10_visual.inst.inst.cfg
@@ -0,0 +1,23 @@
+[general]
+version = 4
+name = Visual
+definition = uni_base
+
+[metadata]
+setting_version = 11
+type = intent
+quality_type = q010
+intent_category = visual
+material = generic_abs
+variant = 0.40mm Nozzle 
+
+[values]
+speed_print = 50
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = 35
+speed_wall = =speed_topbottom
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall 
+adaptive_layer_height_enabled = true
+
diff --git a/resources/intent/uni_base/abs/abs_nozzle_0.40_layer_0.15_eng.inst.inst.cfg b/resources/intent/uni_base/abs/abs_nozzle_0.40_layer_0.15_eng.inst.inst.cfg
new file mode 100644
index 0000000000..08fe077da9
--- /dev/null
+++ b/resources/intent/uni_base/abs/abs_nozzle_0.40_layer_0.15_eng.inst.inst.cfg
@@ -0,0 +1,21 @@
+[general]
+version = 4
+name = Accurate
+definition = uni_base
+
+[metadata]
+setting_version = 11
+type = intent
+intent_category = engineering
+quality_type = q015
+material = generic_abs
+variant = 0.40mm Nozzle
+
+[values]
+speed_print = 70
+speed_infill = =speed_print
+speed_layer_0 = 25
+speed_topbottom = 40
+speed_wall = =speed_topbottom
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall 
diff --git a/resources/intent/uni_base/abs/abs_nozzle_0.40_layer_0.15_visual.inst.inst.cfg b/resources/intent/uni_base/abs/abs_nozzle_0.40_layer_0.15_visual.inst.inst.cfg
new file mode 100644
index 0000000000..991ad7e528
--- /dev/null
+++ b/resources/intent/uni_base/abs/abs_nozzle_0.40_layer_0.15_visual.inst.inst.cfg
@@ -0,0 +1,23 @@
+[general]
+version = 4
+name = Visual
+definition = uni_base
+
+[metadata]
+setting_version = 11
+type = intent
+quality_type = q015
+intent_category = visual
+material = generic_abs
+variant = 0.40mm Nozzle 
+
+[values]
+speed_print = 50
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = 35
+speed_wall = =speed_topbottom
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall 
+adaptive_layer_height_enabled = true
+
diff --git a/resources/intent/uni_base/abs/abs_nozzle_0.40_layer_0.20_eng.inst.inst.cfg b/resources/intent/uni_base/abs/abs_nozzle_0.40_layer_0.20_eng.inst.inst.cfg
new file mode 100644
index 0000000000..0809d3f8ec
--- /dev/null
+++ b/resources/intent/uni_base/abs/abs_nozzle_0.40_layer_0.20_eng.inst.inst.cfg
@@ -0,0 +1,21 @@
+[general]
+version = 4
+name = Accurate
+definition = uni_base
+
+[metadata]
+setting_version = 11
+type = intent
+intent_category = engineering
+quality_type = q020
+material = generic_abs
+variant = 0.40mm Nozzle
+
+[values]
+speed_print = 70
+speed_infill = =speed_print
+speed_layer_0 = 25
+speed_topbottom = 40
+speed_wall = =speed_topbottom
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall 
diff --git a/resources/intent/uni_base/abs/abs_nozzle_0.40_layer_0.20_quick.inst.cfg b/resources/intent/uni_base/abs/abs_nozzle_0.40_layer_0.20_quick.inst.cfg
new file mode 100644
index 0000000000..15e9bcb110
--- /dev/null
+++ b/resources/intent/uni_base/abs/abs_nozzle_0.40_layer_0.20_quick.inst.cfg
@@ -0,0 +1,29 @@
+[general]
+version = 4
+name = Quick
+definition = uni_base
+
+[metadata]
+setting_version = 11
+type = intent
+intent_category = quick
+quality_type = q020
+material = generic_abs
+variant = 0.40mm Nozzle
+
+[values]
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5 
+speed_print = 100
+speed_infill = =speed_print
+speed_layer_0 = 25
+speed_topbottom = 65
+speed_wall = =speed_topbottom
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall 
+
diff --git a/resources/intent/uni_base/abs/abs_nozzle_0.40_layer_0.20_visual.inst.inst.cfg b/resources/intent/uni_base/abs/abs_nozzle_0.40_layer_0.20_visual.inst.inst.cfg
new file mode 100644
index 0000000000..10229b3dcc
--- /dev/null
+++ b/resources/intent/uni_base/abs/abs_nozzle_0.40_layer_0.20_visual.inst.inst.cfg
@@ -0,0 +1,23 @@
+[general]
+version = 4
+name = Visual
+definition = uni_base
+
+[metadata]
+setting_version = 11
+type = intent
+quality_type = q020
+intent_category = visual
+material = generic_abs
+variant = 0.40mm Nozzle 
+
+[values]
+speed_print = 50
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = 35
+speed_wall = =speed_topbottom
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall 
+adaptive_layer_height_enabled = true
+
diff --git a/resources/intent/uni_base/abs/abs_nozzle_0.40_layer_0.25_quick.inst.cfg b/resources/intent/uni_base/abs/abs_nozzle_0.40_layer_0.25_quick.inst.cfg
new file mode 100644
index 0000000000..1bb906e500
--- /dev/null
+++ b/resources/intent/uni_base/abs/abs_nozzle_0.40_layer_0.25_quick.inst.cfg
@@ -0,0 +1,29 @@
+[general]
+version = 4
+name = Quick
+definition = uni_base
+
+[metadata]
+setting_version = 11
+type = intent
+intent_category = quick
+quality_type = q025
+material = generic_abs
+variant = 0.40mm Nozzle
+
+[values]
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5 
+speed_print = 100
+speed_infill = =speed_print
+speed_layer_0 = 25
+speed_topbottom = 65
+speed_wall = =speed_topbottom
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall 
+
diff --git a/resources/intent/uni_base/abs/abs_nozzle_0.40_layer_0.30_quick.inst.cfg b/resources/intent/uni_base/abs/abs_nozzle_0.40_layer_0.30_quick.inst.cfg
new file mode 100644
index 0000000000..63362b01e4
--- /dev/null
+++ b/resources/intent/uni_base/abs/abs_nozzle_0.40_layer_0.30_quick.inst.cfg
@@ -0,0 +1,29 @@
+[general]
+version = 4
+name = Quick
+definition = uni_base
+
+[metadata]
+setting_version = 11
+type = intent
+intent_category = quick
+quality_type = q030
+material = generic_abs
+variant = 0.40mm Nozzle
+
+[values]
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5 
+speed_print = 100
+speed_infill = =speed_print
+speed_layer_0 = 25
+speed_topbottom = 65
+speed_wall = =speed_topbottom
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall 
+
diff --git a/resources/intent/uni_base/petg/petg_nozzle_0.40_layer_0.10_visual.inst.inst.cfg b/resources/intent/uni_base/petg/petg_nozzle_0.40_layer_0.10_visual.inst.inst.cfg
new file mode 100644
index 0000000000..5c8215d8df
--- /dev/null
+++ b/resources/intent/uni_base/petg/petg_nozzle_0.40_layer_0.10_visual.inst.inst.cfg
@@ -0,0 +1,23 @@
+[general]
+version = 4
+name = Visual
+definition = uni_base
+
+[metadata]
+setting_version = 11
+type = intent
+quality_type = q010
+intent_category = visual
+material = generic_petg
+variant = 0.40mm Nozzle 
+
+[values]
+speed_print = 50
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = 35
+speed_wall = =speed_topbottom
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall 
+adaptive_layer_height_enabled = true
+
diff --git a/resources/intent/uni_base/petg/petg_nozzle_0.40_layer_0.15_eng.inst.inst.cfg b/resources/intent/uni_base/petg/petg_nozzle_0.40_layer_0.15_eng.inst.inst.cfg
new file mode 100644
index 0000000000..9384902434
--- /dev/null
+++ b/resources/intent/uni_base/petg/petg_nozzle_0.40_layer_0.15_eng.inst.inst.cfg
@@ -0,0 +1,21 @@
+[general]
+version = 4
+name = Accurate
+definition = uni_base
+
+[metadata]
+setting_version = 11
+type = intent
+intent_category = engineering
+quality_type = q015
+material = generic_petg
+variant = 0.40mm Nozzle
+
+[values]
+speed_print = 70
+speed_infill = =speed_print
+speed_layer_0 = 25
+speed_topbottom = 40
+speed_wall = =speed_topbottom
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall 
diff --git a/resources/intent/uni_base/petg/petg_nozzle_0.40_layer_0.15_visual.inst.inst.cfg b/resources/intent/uni_base/petg/petg_nozzle_0.40_layer_0.15_visual.inst.inst.cfg
new file mode 100644
index 0000000000..2db5dddc50
--- /dev/null
+++ b/resources/intent/uni_base/petg/petg_nozzle_0.40_layer_0.15_visual.inst.inst.cfg
@@ -0,0 +1,23 @@
+[general]
+version = 4
+name = Visual
+definition = uni_base
+
+[metadata]
+setting_version = 11
+type = intent
+quality_type = q015
+intent_category = visual
+material = generic_petg
+variant = 0.40mm Nozzle 
+
+[values]
+speed_print = 50
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = 35
+speed_wall = =speed_topbottom
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall 
+adaptive_layer_height_enabled = true
+
diff --git a/resources/intent/uni_base/petg/petg_nozzle_0.40_layer_0.20_eng.inst.inst.cfg b/resources/intent/uni_base/petg/petg_nozzle_0.40_layer_0.20_eng.inst.inst.cfg
new file mode 100644
index 0000000000..0b808e199b
--- /dev/null
+++ b/resources/intent/uni_base/petg/petg_nozzle_0.40_layer_0.20_eng.inst.inst.cfg
@@ -0,0 +1,21 @@
+[general]
+version = 4
+name = Accurate
+definition = uni_base
+
+[metadata]
+setting_version = 11
+type = intent
+intent_category = engineering
+quality_type = q020
+material = generic_petg
+variant = 0.40mm Nozzle
+
+[values]
+speed_print = 70
+speed_infill = =speed_print
+speed_layer_0 = 25
+speed_topbottom = 40
+speed_wall = =speed_topbottom
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall 
diff --git a/resources/intent/uni_base/petg/petg_nozzle_0.40_layer_0.20_quick.inst.cfg b/resources/intent/uni_base/petg/petg_nozzle_0.40_layer_0.20_quick.inst.cfg
new file mode 100644
index 0000000000..919bbbcfc3
--- /dev/null
+++ b/resources/intent/uni_base/petg/petg_nozzle_0.40_layer_0.20_quick.inst.cfg
@@ -0,0 +1,29 @@
+[general]
+version = 4
+name = Quick
+definition = uni_base
+
+[metadata]
+setting_version = 11
+type = intent
+intent_category = quick
+quality_type = q020
+material = generic_petg
+variant = 0.40mm Nozzle
+
+[values]
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5 
+speed_print = 100
+speed_infill = =speed_print
+speed_layer_0 = 25
+speed_topbottom = 65
+speed_wall = =speed_topbottom
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall 
+
diff --git a/resources/intent/uni_base/petg/petg_nozzle_0.40_layer_0.20_visual.inst.inst.cfg b/resources/intent/uni_base/petg/petg_nozzle_0.40_layer_0.20_visual.inst.inst.cfg
new file mode 100644
index 0000000000..95d2e7f9de
--- /dev/null
+++ b/resources/intent/uni_base/petg/petg_nozzle_0.40_layer_0.20_visual.inst.inst.cfg
@@ -0,0 +1,23 @@
+[general]
+version = 4
+name = Visual
+definition = uni_base
+
+[metadata]
+setting_version = 11
+type = intent
+quality_type = q020
+intent_category = visual
+material = generic_petg
+variant = 0.40mm Nozzle 
+
+[values]
+speed_print = 50
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = 35
+speed_wall = =speed_topbottom
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall 
+adaptive_layer_height_enabled = true
+
diff --git a/resources/intent/uni_base/petg/petg_nozzle_0.40_layer_0.25_quick.inst.cfg b/resources/intent/uni_base/petg/petg_nozzle_0.40_layer_0.25_quick.inst.cfg
new file mode 100644
index 0000000000..af9ab6932c
--- /dev/null
+++ b/resources/intent/uni_base/petg/petg_nozzle_0.40_layer_0.25_quick.inst.cfg
@@ -0,0 +1,29 @@
+[general]
+version = 4
+name = Quick
+definition = uni_base
+
+[metadata]
+setting_version = 11
+type = intent
+intent_category = quick
+quality_type = q025
+material = generic_petg
+variant = 0.40mm Nozzle
+
+[values]
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5 
+speed_print = 100
+speed_infill = =speed_print
+speed_layer_0 = 25
+speed_topbottom = 65
+speed_wall = =speed_topbottom
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall 
+
diff --git a/resources/intent/uni_base/petg/petg_nozzle_0.40_layer_0.30_quick.inst.cfg b/resources/intent/uni_base/petg/petg_nozzle_0.40_layer_0.30_quick.inst.cfg
new file mode 100644
index 0000000000..53cd5e63f2
--- /dev/null
+++ b/resources/intent/uni_base/petg/petg_nozzle_0.40_layer_0.30_quick.inst.cfg
@@ -0,0 +1,29 @@
+[general]
+version = 4
+name = Quick
+definition = uni_base
+
+[metadata]
+setting_version = 11
+type = intent
+intent_category = quick
+quality_type = q030
+material = generic_petg
+variant = 0.40mm Nozzle
+
+[values]
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5 
+speed_print = 100
+speed_infill = =speed_print
+speed_layer_0 = 25
+speed_topbottom = 65
+speed_wall = =speed_topbottom
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall 
+
diff --git a/resources/intent/uni_base/pla/pla_nozzle_0.40_layer_0.10_visual.inst.inst.cfg b/resources/intent/uni_base/pla/pla_nozzle_0.40_layer_0.10_visual.inst.inst.cfg
new file mode 100644
index 0000000000..d4652c4e9a
--- /dev/null
+++ b/resources/intent/uni_base/pla/pla_nozzle_0.40_layer_0.10_visual.inst.inst.cfg
@@ -0,0 +1,23 @@
+[general]
+version = 4
+name = Visual
+definition = uni_base
+
+[metadata]
+setting_version = 11
+type = intent
+quality_type = q010
+intent_category = visual
+material = generic_pla
+variant = 0.40mm Nozzle 
+
+[values]
+speed_print = 50
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = 35
+speed_wall = =speed_topbottom
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall 
+adaptive_layer_height_enabled = true
+
diff --git a/resources/intent/uni_base/pla/pla_nozzle_0.40_layer_0.15_eng.inst.inst.cfg b/resources/intent/uni_base/pla/pla_nozzle_0.40_layer_0.15_eng.inst.inst.cfg
new file mode 100644
index 0000000000..cc888bac1b
--- /dev/null
+++ b/resources/intent/uni_base/pla/pla_nozzle_0.40_layer_0.15_eng.inst.inst.cfg
@@ -0,0 +1,21 @@
+[general]
+version = 4
+name = Accurate
+definition = uni_base
+
+[metadata]
+setting_version = 11
+type = intent
+intent_category = engineering
+quality_type = q015
+material = generic_pla
+variant = 0.40mm Nozzle
+
+[values]
+speed_print = 70
+speed_infill = =speed_print
+speed_layer_0 = 25
+speed_topbottom = 40
+speed_wall = =speed_topbottom
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall 
diff --git a/resources/intent/uni_base/pla/pla_nozzle_0.40_layer_0.15_visual.inst.inst.cfg b/resources/intent/uni_base/pla/pla_nozzle_0.40_layer_0.15_visual.inst.inst.cfg
new file mode 100644
index 0000000000..155191731e
--- /dev/null
+++ b/resources/intent/uni_base/pla/pla_nozzle_0.40_layer_0.15_visual.inst.inst.cfg
@@ -0,0 +1,23 @@
+[general]
+version = 4
+name = Visual
+definition = uni_base
+
+[metadata]
+setting_version = 11
+type = intent
+quality_type = q015
+intent_category = visual
+material = generic_pla
+variant = 0.40mm Nozzle 
+
+[values]
+speed_print = 50
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = 35
+speed_wall = =speed_topbottom
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall 
+adaptive_layer_height_enabled = true
+
diff --git a/resources/intent/uni_base/pla/pla_nozzle_0.40_layer_0.20_eng.inst.inst.cfg b/resources/intent/uni_base/pla/pla_nozzle_0.40_layer_0.20_eng.inst.inst.cfg
new file mode 100644
index 0000000000..ae8ed59dc2
--- /dev/null
+++ b/resources/intent/uni_base/pla/pla_nozzle_0.40_layer_0.20_eng.inst.inst.cfg
@@ -0,0 +1,21 @@
+[general]
+version = 4
+name = Accurate
+definition = uni_base
+
+[metadata]
+setting_version = 11
+type = intent
+intent_category = engineering
+quality_type = q020
+material = generic_pla
+variant = 0.40mm Nozzle
+
+[values]
+speed_print = 70
+speed_infill = =speed_print
+speed_layer_0 = 25
+speed_topbottom = 40
+speed_wall = =speed_topbottom
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall 
diff --git a/resources/intent/uni_base/pla/pla_nozzle_0.40_layer_0.20_quick.inst.cfg b/resources/intent/uni_base/pla/pla_nozzle_0.40_layer_0.20_quick.inst.cfg
new file mode 100644
index 0000000000..1aee0428a4
--- /dev/null
+++ b/resources/intent/uni_base/pla/pla_nozzle_0.40_layer_0.20_quick.inst.cfg
@@ -0,0 +1,29 @@
+[general]
+version = 4
+name = Quick
+definition = uni_base
+
+[metadata]
+setting_version = 11
+type = intent
+intent_category = quick
+quality_type = q020
+material = generic_pla
+variant = 0.40mm Nozzle
+
+[values]
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5 
+speed_print = 100
+speed_infill = =speed_print
+speed_layer_0 = 25
+speed_topbottom = 65
+speed_wall = =speed_topbottom
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall 
+
diff --git a/resources/intent/uni_base/pla/pla_nozzle_0.40_layer_0.20_visual.inst.inst.cfg b/resources/intent/uni_base/pla/pla_nozzle_0.40_layer_0.20_visual.inst.inst.cfg
new file mode 100644
index 0000000000..d9b0bc40e9
--- /dev/null
+++ b/resources/intent/uni_base/pla/pla_nozzle_0.40_layer_0.20_visual.inst.inst.cfg
@@ -0,0 +1,23 @@
+[general]
+version = 4
+name = Visual
+definition = uni_base
+
+[metadata]
+setting_version = 11
+type = intent
+quality_type = q020
+intent_category = visual
+material = generic_pla
+variant = 0.40mm Nozzle 
+
+[values]
+speed_print = 50
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = 35
+speed_wall = =speed_topbottom
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall 
+adaptive_layer_height_enabled = true
+
diff --git a/resources/intent/uni_base/pla/pla_nozzle_0.40_layer_0.25_quick.inst.cfg b/resources/intent/uni_base/pla/pla_nozzle_0.40_layer_0.25_quick.inst.cfg
new file mode 100644
index 0000000000..a5ae38c82f
--- /dev/null
+++ b/resources/intent/uni_base/pla/pla_nozzle_0.40_layer_0.25_quick.inst.cfg
@@ -0,0 +1,29 @@
+[general]
+version = 4
+name = Quick
+definition = uni_base
+
+[metadata]
+setting_version = 11
+type = intent
+intent_category = quick
+quality_type = q025
+material = generic_pla
+variant = 0.40mm Nozzle
+
+[values]
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5 
+speed_print = 100
+speed_infill = =speed_print
+speed_layer_0 = 25
+speed_topbottom = 65
+speed_wall = =speed_topbottom
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall 
+
diff --git a/resources/intent/uni_base/pla/pla_nozzle_0.40_layer_0.30_quick.inst.cfg b/resources/intent/uni_base/pla/pla_nozzle_0.40_layer_0.30_quick.inst.cfg
new file mode 100644
index 0000000000..32f36e0b30
--- /dev/null
+++ b/resources/intent/uni_base/pla/pla_nozzle_0.40_layer_0.30_quick.inst.cfg
@@ -0,0 +1,29 @@
+[general]
+version = 4
+name = Quick
+definition = uni_base
+
+[metadata]
+setting_version = 11
+type = intent
+intent_category = quick
+quality_type = q030
+material = generic_pla
+variant = 0.40mm Nozzle
+
+[values]
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5 
+speed_print = 100
+speed_infill = =speed_print
+speed_layer_0 = 25
+speed_topbottom = 65
+speed_wall = =speed_topbottom
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall 
+