Merge pull request #11675 from Ultimaker/PP-115_unify-wall-thickness

PP-115_unify-wall-thickness

28 files changed, 28 insertions, 56 deletions

diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print_Quick.inst.cfg
index 5028a193e1..3973958201 100644
--- a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print_Quick.inst.cfg
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print_Quick.inst.cfg
@@ -18,8 +18,7 @@ speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 speed_layer_0 = 20
-top_bottom_thickness = =wall_thickness
-wall_thickness = =line_width * 2
+top_bottom_thickness = 0.8
 infill_sparse_density = 15
 
 jerk_print = 30
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Visual.inst.cfg
index 03b3974996..4769a7b237 100644
--- a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Visual.inst.cfg
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Visual.inst.cfg
@@ -13,5 +13,4 @@ variant = AA 0.4
 
 [values]
 speed_infill = 50
-wall_thickness = =wall_line_width * 3
-top_bottom_thickness = =wall_thickness
+top_bottom_thickness = 1.05
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_High_Visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_High_Visual.inst.cfg
index 7d2fe3435c..349754543a 100644
--- a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_High_Visual.inst.cfg
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_High_Visual.inst.cfg
@@ -13,5 +13,4 @@ variant = AA 0.4
 
 [values]
 speed_infill = 50
-wall_thickness = =wall_line_width * 3
-top_bottom_thickness = =wall_thickness
+top_bottom_thickness = 1.05
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Visual.inst.cfg
index 12c05d6a9a..56add13d10 100644
--- a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Visual.inst.cfg
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Visual.inst.cfg
@@ -13,5 +13,4 @@ variant = AA 0.4
 
 [values]
 speed_infill = 50
-wall_thickness = =wall_line_width * 3
-top_bottom_thickness = =wall_thickness
+top_bottom_thickness = 1.05
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print_Quick.inst.cfg
index 5d869888c5..fc15076461 100644
--- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print_Quick.inst.cfg
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print_Quick.inst.cfg
@@ -18,8 +18,7 @@ speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 speed_layer_0 = 20
-top_bottom_thickness = =wall_thickness
-wall_thickness = =line_width * 2
+top_bottom_thickness = 0.8
 infill_sparse_density = 15
 
 jerk_print = 30
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Visual.inst.cfg
index 7b455965b6..22b9c8c868 100644
--- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Visual.inst.cfg
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Visual.inst.cfg
@@ -13,5 +13,4 @@ variant = AA 0.4
 
 [values]
 speed_infill = 50
-wall_thickness = =wall_line_width * 3
-top_bottom_thickness = =wall_thickness
+top_bottom_thickness = 1.05
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_High_Visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_High_Visual.inst.cfg
index 20eef0666e..0d2a6e78dc 100644
--- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_High_Visual.inst.cfg
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_High_Visual.inst.cfg
@@ -13,5 +13,4 @@ variant = AA 0.4
 
 [values]
 speed_infill = 50
-wall_thickness = =wall_line_width * 3
-top_bottom_thickness = =wall_thickness
+top_bottom_thickness = 1.05
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Visual.inst.cfg
index 7826c9b0b2..7abc1e166d 100644
--- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Visual.inst.cfg
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Visual.inst.cfg
@@ -13,5 +13,4 @@ variant = AA 0.4
 
 [values]
 speed_infill = 50
-wall_thickness = =wall_line_width * 3
-top_bottom_thickness = =wall_thickness
+top_bottom_thickness = 1.05
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg
index fdaf5f32ed..5150a762e3 100644
--- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg
@@ -35,5 +35,4 @@ speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 speed_layer_0 = 20
 
-wall_thickness = =line_width * 2
-top_bottom_thickness = =wall_thickness
\ No newline at end of file
+top_bottom_thickness = 0.8
\ No newline at end of file
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print_Quick.inst.cfg
index 3dbb03b38c..c09de5cc0a 100644
--- a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print_Quick.inst.cfg
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print_Quick.inst.cfg
@@ -18,8 +18,7 @@ speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 speed_layer_0 = 20
-top_bottom_thickness = =wall_thickness
-wall_thickness = =line_width * 2
+top_bottom_thickness = 0.8
 infill_sparse_density = 15
 
 jerk_print = 30
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Visual.inst.cfg
index c80e665041..b8a8b26c25 100644
--- a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Visual.inst.cfg
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Visual.inst.cfg
@@ -13,5 +13,4 @@ variant = AA 0.4
 
 [values]
 speed_infill = 50
-wall_thickness = =wall_line_width * 3
-top_bottom_thickness = =wall_thickness
+top_bottom_thickness = 1.05
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_High_Visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_High_Visual.inst.cfg
index 5a0fdccf3c..c3fa9d03a7 100644
--- a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_High_Visual.inst.cfg
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_High_Visual.inst.cfg
@@ -13,5 +13,4 @@ variant = AA 0.4
 
 [values]
 speed_infill = 50
-wall_thickness = =wall_line_width * 3
-top_bottom_thickness = =wall_thickness
+top_bottom_thickness = 1.05
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Visual.inst.cfg
index 610fa16fcc..df474457eb 100644
--- a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Visual.inst.cfg
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Visual.inst.cfg
@@ -13,5 +13,4 @@ variant = AA 0.4
 
 [values]
 speed_infill = 50
-wall_thickness = =wall_line_width * 3
-top_bottom_thickness = =wall_thickness
+top_bottom_thickness = 1.05
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg
index 4ca187133e..865115e1da 100644
--- a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg
@@ -35,5 +35,4 @@ speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 speed_layer_0 = 20
 
-wall_thickness = =line_width * 2
-top_bottom_thickness = =wall_thickness
\ No newline at end of file
+top_bottom_thickness = 0.8
\ No newline at end of file
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print_Quick.inst.cfg
index 374cb1bca4..a6d14f8548 100644
--- a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print_Quick.inst.cfg
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print_Quick.inst.cfg
@@ -18,8 +18,7 @@ speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 speed_layer_0 = 20
-top_bottom_thickness = =wall_thickness
-wall_thickness = =line_width * 2
+top_bottom_thickness = 0.8
 infill_sparse_density = 15
 
 jerk_print = 30
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Visual.inst.cfg
index 45cba2271e..9df2b7d624 100644
--- a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Visual.inst.cfg
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Visual.inst.cfg
@@ -13,5 +13,4 @@ variant = AA 0.4
 
 [values]
 speed_infill = 50
-wall_thickness = =wall_line_width * 3
-top_bottom_thickness = =wall_thickness
+top_bottom_thickness = 1.05
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_High_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_High_Visual.inst.cfg
index 3658a72539..c49a030379 100644
--- a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_High_Visual.inst.cfg
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_High_Visual.inst.cfg
@@ -13,5 +13,4 @@ variant = AA 0.4
 
 [values]
 speed_infill = 50
-wall_thickness = =wall_line_width * 3
-top_bottom_thickness = =wall_thickness
+top_bottom_thickness = 1.05
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Visual.inst.cfg
index 9633a2d6e8..68f5c8e67c 100644
--- a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Visual.inst.cfg
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Visual.inst.cfg
@@ -13,5 +13,4 @@ variant = AA 0.4
 
 [values]
 speed_infill = 50
-wall_thickness = =wall_line_width * 3
-top_bottom_thickness = =wall_thickness
+top_bottom_thickness = 1.05
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print_Quick.inst.cfg
index 25dcb1a793..c26054525f 100644
--- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print_Quick.inst.cfg
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print_Quick.inst.cfg
@@ -18,8 +18,7 @@ speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 speed_layer_0 = 20
-top_bottom_thickness = =wall_thickness
-wall_thickness = =line_width * 2
+top_bottom_thickness = 0.8
 infill_sparse_density = 15
 
 jerk_print = 30
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Visual.inst.cfg
index ff6adc5257..650f61bc63 100644
--- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Visual.inst.cfg
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Visual.inst.cfg
@@ -13,5 +13,4 @@ variant = AA 0.4
 
 [values]
 speed_infill = 50
-wall_thickness = =wall_line_width * 3
-top_bottom_thickness = =wall_thickness
+top_bottom_thickness = 1.05
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_High_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_High_Visual.inst.cfg
index 09c67fb20e..c817103b3c 100644
--- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_High_Visual.inst.cfg
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_High_Visual.inst.cfg
@@ -13,5 +13,4 @@ variant = AA 0.4
 
 [values]
 speed_infill = 50
-wall_thickness = =wall_line_width * 3
-top_bottom_thickness = =wall_thickness
+top_bottom_thickness = 1.05
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Visual.inst.cfg
index 8934e3fd80..3b355b7da9 100644
--- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Visual.inst.cfg
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Visual.inst.cfg
@@ -13,5 +13,4 @@ variant = AA 0.4
 
 [values]
 speed_infill = 50
-wall_thickness = =wall_line_width * 3
-top_bottom_thickness = =wall_thickness
+top_bottom_thickness = 1.05
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg
index a3f5b02ec2..a7b56a55ae 100644
--- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg
@@ -35,5 +35,4 @@ speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 speed_layer_0 = 20
 
-wall_thickness = =line_width * 2
-top_bottom_thickness = =wall_thickness
\ No newline at end of file
+top_bottom_thickness = 0.8
\ No newline at end of file
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print_Quick.inst.cfg
index a811b9d673..13c8672be2 100644
--- a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print_Quick.inst.cfg
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print_Quick.inst.cfg
@@ -18,8 +18,7 @@ speed_wall = =speed_print
 speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 speed_layer_0 = 20
-top_bottom_thickness = =wall_thickness
-wall_thickness = =line_width * 2
+top_bottom_thickness = 0.8
 infill_sparse_density = 15
 
 jerk_print = 30
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Visual.inst.cfg
index 39292b0306..2c21b84c70 100644
--- a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Visual.inst.cfg
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Visual.inst.cfg
@@ -13,5 +13,4 @@ variant = AA 0.4
 
 [values]
 speed_infill = 50
-wall_thickness = =wall_line_width * 3
-top_bottom_thickness = =wall_thickness
+top_bottom_thickness = 1.05
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_High_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_High_Visual.inst.cfg
index 53eb8d16fd..4efb4834fb 100644
--- a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_High_Visual.inst.cfg
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_High_Visual.inst.cfg
@@ -13,5 +13,4 @@ variant = AA 0.4
 
 [values]
 speed_infill = 50
-wall_thickness = =wall_line_width * 3
-top_bottom_thickness = =wall_thickness
+top_bottom_thickness = 1.05
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Visual.inst.cfg
index 155f6177cc..a964da4111 100644
--- a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Visual.inst.cfg
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Visual.inst.cfg
@@ -13,5 +13,4 @@ variant = AA 0.4
 
 [values]
 speed_infill = 50
-wall_thickness = =wall_line_width * 3
-top_bottom_thickness = =wall_thickness
+top_bottom_thickness = 1.05
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg
index 5d22b722af..dec43bd73e 100644
--- a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg
@@ -35,5 +35,4 @@ speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 speed_layer_0 = 20
 
-wall_thickness = =line_width * 2
-top_bottom_thickness = =wall_thickness
\ No newline at end of file
+top_bottom_thickness = 0.8
\ No newline at end of file