Merge branch 'master' into libArachne_rebased

Conflicts:
	cura/CuraApplication.py: Setting version
	fdmprinter and fdmextruder: Setting version
	intents, qualities and variants: Setting version
	Changelog: 4.9.1 was added, should be below Arachne changes

36 files changed, 954 insertions, 0 deletions

diff --git a/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_ABS_accurate_B.inst.cfg b/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_ABS_accurate_B.inst.cfg
new file mode 100644
index 0000000000..174905d80d
--- /dev/null
+++ b/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_ABS_accurate_B.inst.cfg
@@ -0,0 +1,21 @@
+[general]
+version = 4
+name = Accurate
+definition = deltacomb_base
+
+[metadata]
+setting_version = 18
+type = intent
+quality_type = D010
+intent_category = engineering
+material = generic_abs
+variant = DBE 0.40mm
+
+[values]
+jerk_wall = 5
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+wall_thickness = =line_width * 3
+top_bottom_thickness = =wall_thickness
+xy_offset = =-layer_height * 0.2
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
\ No newline at end of file
diff --git a/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_ABS_accurate_C.inst.cfg b/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_ABS_accurate_C.inst.cfg
new file mode 100644
index 0000000000..6c21101a3d
--- /dev/null
+++ b/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_ABS_accurate_C.inst.cfg
@@ -0,0 +1,21 @@
+[general]
+version = 4
+name = Accurate
+definition = deltacomb_base
+
+[metadata]
+setting_version = 18
+type = intent
+quality_type = D015
+intent_category = engineering
+material = generic_abs
+variant = DBE 0.40mm
+
+[values]
+jerk_wall = 5
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+wall_thickness = =line_width * 3
+top_bottom_thickness = =wall_thickness
+xy_offset = =-layer_height * 0.2
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
\ No newline at end of file
diff --git a/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_ABS_accurate_D.inst.cfg b/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_ABS_accurate_D.inst.cfg
new file mode 100644
index 0000000000..1c42d4cf69
--- /dev/null
+++ b/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_ABS_accurate_D.inst.cfg
@@ -0,0 +1,21 @@
+[general]
+version = 4
+name = Accurate
+definition = deltacomb_base
+
+[metadata]
+setting_version = 18
+type = intent
+quality_type = D020
+intent_category = engineering
+material = generic_abs
+variant = DBE 0.40mm
+
+[values]
+jerk_wall = 5
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+wall_thickness = =line_width * 3
+top_bottom_thickness = =wall_thickness
+xy_offset = =-layer_height * 0.2
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
\ No newline at end of file
diff --git a/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_ABS_quick_D.inst.cfg b/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_ABS_quick_D.inst.cfg
new file mode 100644
index 0000000000..d6d2535bac
--- /dev/null
+++ b/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_ABS_quick_D.inst.cfg
@@ -0,0 +1,31 @@
+[general]
+version = 4
+name = Quick
+definition = deltacomb_base
+
+[metadata]
+setting_version = 18
+type = intent
+quality_type = D020
+intent_category = quick
+material = generic_abs
+variant = DBE 0.40mm
+
+[values]
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 2
+fill_perimeter_gaps = nowhere
+infill_sparse_density = 15
+infill_line_width = =line_width
+jerk_print = 30
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+line_width = =machine_nozzle_size
+wall_line_width_x = =line_width
\ No newline at end of file
diff --git a/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_ABS_quick_E.inst.cfg b/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_ABS_quick_E.inst.cfg
new file mode 100644
index 0000000000..969bef06ba
--- /dev/null
+++ b/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_ABS_quick_E.inst.cfg
@@ -0,0 +1,31 @@
+[general]
+version = 4
+name = Quick
+definition = deltacomb_base
+
+[metadata]
+setting_version = 18
+type = intent
+quality_type = D030
+intent_category = quick
+material = generic_abs
+variant = DBE 0.40mm
+
+[values]
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 2
+fill_perimeter_gaps = nowhere
+infill_sparse_density = 15
+infill_line_width = =line_width
+jerk_print = 30
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+line_width = =machine_nozzle_size
+wall_line_width_x = =line_width
\ No newline at end of file
diff --git a/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_ABS_accurate_B.inst.cfg b/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_ABS_accurate_B.inst.cfg
new file mode 100644
index 0000000000..a71b02e70f
--- /dev/null
+++ b/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_ABS_accurate_B.inst.cfg
@@ -0,0 +1,21 @@
+[general]
+version = 4
+name = Accurate
+definition = deltacomb_base
+
+[metadata]
+setting_version = 18
+type = intent
+quality_type = D010
+intent_category = engineering
+material = generic_abs
+variant = FBE 0.40mm
+
+[values]
+jerk_wall = 5
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+wall_thickness = =line_width * 3
+top_bottom_thickness = =wall_thickness
+xy_offset = =-layer_height * 0.2
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
\ No newline at end of file
diff --git a/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_ABS_accurate_C.inst.cfg b/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_ABS_accurate_C.inst.cfg
new file mode 100644
index 0000000000..46f7628c59
--- /dev/null
+++ b/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_ABS_accurate_C.inst.cfg
@@ -0,0 +1,21 @@
+[general]
+version = 4
+name = Accurate
+definition = deltacomb_base
+
+[metadata]
+setting_version = 18
+type = intent
+quality_type = D015
+intent_category = engineering
+material = generic_abs
+variant = FBE 0.40mm
+
+[values]
+jerk_wall = 5
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+wall_thickness = =line_width * 3
+top_bottom_thickness = =wall_thickness
+xy_offset = =-layer_height * 0.2
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
\ No newline at end of file
diff --git a/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_ABS_accurate_D.inst.cfg b/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_ABS_accurate_D.inst.cfg
new file mode 100644
index 0000000000..60133b3ab4
--- /dev/null
+++ b/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_ABS_accurate_D.inst.cfg
@@ -0,0 +1,21 @@
+[general]
+version = 4
+name = Accurate
+definition = deltacomb_base
+
+[metadata]
+setting_version = 18
+type = intent
+quality_type = D020
+intent_category = engineering
+material = generic_abs
+variant = FBE 0.40mm
+
+[values]
+jerk_wall = 5
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+wall_thickness = =line_width * 3
+top_bottom_thickness = =wall_thickness
+xy_offset = =-layer_height * 0.2
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
\ No newline at end of file
diff --git a/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_ABS_quick_D.inst.cfg b/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_ABS_quick_D.inst.cfg
new file mode 100644
index 0000000000..8e6916f4ae
--- /dev/null
+++ b/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_ABS_quick_D.inst.cfg
@@ -0,0 +1,31 @@
+[general]
+version = 4
+name = Quick
+definition = deltacomb_base
+
+[metadata]
+setting_version = 18
+type = intent
+quality_type = D020
+intent_category = quick
+material = generic_abs
+variant = FBE 0.40mm
+
+[values]
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 2
+fill_perimeter_gaps = nowhere
+infill_sparse_density = 15
+infill_line_width = =line_width
+jerk_print = 30
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+line_width = =machine_nozzle_size
+wall_line_width_x = =line_width
\ No newline at end of file
diff --git a/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_ABS_quick_E.inst.cfg b/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_ABS_quick_E.inst.cfg
new file mode 100644
index 0000000000..a39c876f96
--- /dev/null
+++ b/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_ABS_quick_E.inst.cfg
@@ -0,0 +1,31 @@
+[general]
+version = 4
+name = Quick
+definition = deltacomb_base
+
+[metadata]
+setting_version = 18
+type = intent
+quality_type = D030
+intent_category = quick
+material = generic_abs
+variant = FBE 0.40mm
+
+[values]
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 2
+fill_perimeter_gaps = nowhere
+infill_sparse_density = 15
+infill_line_width = =line_width
+jerk_print = 30
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+line_width = =machine_nozzle_size
+wall_line_width_x = =line_width
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_accurate_B.inst.cfg b/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_accurate_B.inst.cfg
new file mode 100644
index 0000000000..9aeed6407f
--- /dev/null
+++ b/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_accurate_B.inst.cfg
@@ -0,0 +1,21 @@
+[general]
+version = 4
+name = Accurate
+definition = deltacomb_base
+
+[metadata]
+setting_version = 18
+type = intent
+quality_type = D010
+intent_category = engineering
+material = generic_petg
+variant = DBE 0.40mm
+
+[values]
+jerk_wall = 5
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+wall_thickness = =line_width * 3
+top_bottom_thickness = =wall_thickness
+xy_offset = =-layer_height * 0.2
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_accurate_C.inst.cfg b/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_accurate_C.inst.cfg
new file mode 100644
index 0000000000..a8923e56ac
--- /dev/null
+++ b/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_accurate_C.inst.cfg
@@ -0,0 +1,21 @@
+[general]
+version = 4
+name = Accurate
+definition = deltacomb_base
+
+[metadata]
+setting_version = 18
+type = intent
+quality_type = D015
+intent_category = engineering
+material = generic_petg
+variant = DBE 0.40mm
+
+[values]
+jerk_wall = 5
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+wall_thickness = =line_width * 3
+top_bottom_thickness = =wall_thickness
+xy_offset = =-layer_height * 0.2
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_accurate_D.inst.cfg b/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_accurate_D.inst.cfg
new file mode 100644
index 0000000000..ff1f295e3f
--- /dev/null
+++ b/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_accurate_D.inst.cfg
@@ -0,0 +1,21 @@
+[general]
+version = 4
+name = Accurate
+definition = deltacomb_base
+
+[metadata]
+setting_version = 18
+type = intent
+quality_type = D020
+intent_category = engineering
+material = generic_petg
+variant = DBE 0.40mm
+
+[values]
+jerk_wall = 5
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+wall_thickness = =line_width * 3
+top_bottom_thickness = =wall_thickness
+xy_offset = =-layer_height * 0.2
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_quick_C.inst.cfg b/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_quick_C.inst.cfg
new file mode 100644
index 0000000000..b3a25a258d
--- /dev/null
+++ b/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_quick_C.inst.cfg
@@ -0,0 +1,31 @@
+[general]
+version = 4
+name = Quick
+definition = deltacomb_base
+
+[metadata]
+setting_version = 18
+type = intent
+quality_type = D020
+intent_category = quick
+material = generic_petg
+variant = DBE 0.40mm
+
+[values]
+speed_print = 75
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 2
+fill_perimeter_gaps = nowhere
+infill_sparse_density = 15
+infill_line_width = =line_width
+jerk_print = 30
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+line_width = =machine_nozzle_size
+wall_line_width_x = =line_width
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_quick_D.inst.cfg b/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_quick_D.inst.cfg
new file mode 100644
index 0000000000..b3a25a258d
--- /dev/null
+++ b/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_quick_D.inst.cfg
@@ -0,0 +1,31 @@
+[general]
+version = 4
+name = Quick
+definition = deltacomb_base
+
+[metadata]
+setting_version = 18
+type = intent
+quality_type = D020
+intent_category = quick
+material = generic_petg
+variant = DBE 0.40mm
+
+[values]
+speed_print = 75
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 2
+fill_perimeter_gaps = nowhere
+infill_sparse_density = 15
+infill_line_width = =line_width
+jerk_print = 30
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+line_width = =machine_nozzle_size
+wall_line_width_x = =line_width
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_quick_E.inst.cfg b/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_quick_E.inst.cfg
new file mode 100644
index 0000000000..db3607801e
--- /dev/null
+++ b/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_quick_E.inst.cfg
@@ -0,0 +1,31 @@
+[general]
+version = 4
+name = Quick
+definition = deltacomb_base
+
+[metadata]
+setting_version = 18
+type = intent
+quality_type = D030
+intent_category = quick
+material = generic_petg
+variant = DBE 0.40mm
+
+[values]
+speed_print = 75
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 2
+fill_perimeter_gaps = nowhere
+infill_sparse_density = 15
+infill_line_width = =line_width
+jerk_print = 30
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+line_width = =machine_nozzle_size
+wall_line_width_x = =line_width
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_accurate_B.inst.cfg b/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_accurate_B.inst.cfg
new file mode 100644
index 0000000000..e80bcc8352
--- /dev/null
+++ b/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_accurate_B.inst.cfg
@@ -0,0 +1,21 @@
+[general]
+version = 4
+name = Accurate
+definition = deltacomb_base
+
+[metadata]
+setting_version = 18
+type = intent
+quality_type = D010
+intent_category = engineering
+material = generic_petg
+variant = FBE 0.40mm
+
+[values]
+jerk_wall = 5
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+wall_thickness = =line_width * 3
+top_bottom_thickness = =wall_thickness
+xy_offset = =-layer_height * 0.2
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_accurate_C.inst.cfg b/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_accurate_C.inst.cfg
new file mode 100644
index 0000000000..5dd350f125
--- /dev/null
+++ b/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_accurate_C.inst.cfg
@@ -0,0 +1,21 @@
+[general]
+version = 4
+name = Accurate
+definition = deltacomb_base
+
+[metadata]
+setting_version = 18
+type = intent
+quality_type = D015
+intent_category = engineering
+material = generic_petg
+variant = FBE 0.40mm
+
+[values]
+jerk_wall = 5
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+wall_thickness = =line_width * 3
+top_bottom_thickness = =wall_thickness
+xy_offset = =-layer_height * 0.2
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_accurate_D.inst.cfg b/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_accurate_D.inst.cfg
new file mode 100644
index 0000000000..c84cd6cbeb
--- /dev/null
+++ b/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_accurate_D.inst.cfg
@@ -0,0 +1,21 @@
+[general]
+version = 4
+name = Accurate
+definition = deltacomb_base
+
+[metadata]
+setting_version = 18
+type = intent
+quality_type = D020
+intent_category = engineering
+material = generic_petg
+variant = FBE 0.40mm
+
+[values]
+jerk_wall = 5
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+wall_thickness = =line_width * 3
+top_bottom_thickness = =wall_thickness
+xy_offset = =-layer_height * 0.2
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_quick_C.inst.cfg b/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_quick_C.inst.cfg
new file mode 100644
index 0000000000..0529516e35
--- /dev/null
+++ b/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_quick_C.inst.cfg
@@ -0,0 +1,31 @@
+[general]
+version = 4
+name = Quick
+definition = deltacomb_base
+
+[metadata]
+setting_version = 18
+type = intent
+quality_type = D015
+intent_category = quick
+material = generic_petg
+variant = FBE 0.40mm
+
+[values]
+speed_print = 75
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 2
+fill_perimeter_gaps = nowhere
+infill_sparse_density = 15
+infill_line_width = =line_width
+jerk_print = 30
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+line_width = =machine_nozzle_size
+wall_line_width_x = =line_width
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_quick_D.inst.cfg b/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_quick_D.inst.cfg
new file mode 100644
index 0000000000..6e6bd391d5
--- /dev/null
+++ b/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_quick_D.inst.cfg
@@ -0,0 +1,31 @@
+[general]
+version = 4
+name = Quick
+definition = deltacomb_base
+
+[metadata]
+setting_version = 18
+type = intent
+quality_type = D020
+intent_category = quick
+material = generic_petg
+variant = FBE 0.40mm
+
+[values]
+speed_print = 75
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 2
+fill_perimeter_gaps = nowhere
+infill_sparse_density = 15
+infill_line_width = =line_width
+jerk_print = 30
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+line_width = =machine_nozzle_size
+wall_line_width_x = =line_width
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_quick_E.inst.cfg b/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_quick_E.inst.cfg
new file mode 100644
index 0000000000..51e511e2e1
--- /dev/null
+++ b/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_quick_E.inst.cfg
@@ -0,0 +1,31 @@
+[general]
+version = 4
+name = Quick
+definition = deltacomb_base
+
+[metadata]
+setting_version = 18
+type = intent
+quality_type = D030
+intent_category = quick
+material = generic_petg
+variant = FBE 0.40mm
+
+[values]
+speed_print = 75
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 2
+fill_perimeter_gaps = nowhere
+infill_sparse_density = 15
+infill_line_width = =line_width
+jerk_print = 30
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+line_width = =machine_nozzle_size
+wall_line_width_x = =line_width
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_accurate_B.inst.cfg b/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_accurate_B.inst.cfg
new file mode 100644
index 0000000000..8b2f4f1c0c
--- /dev/null
+++ b/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_accurate_B.inst.cfg
@@ -0,0 +1,21 @@
+[general]
+version = 4
+name = Accurate
+definition = deltacomb_base
+
+[metadata]
+setting_version = 18
+type = intent
+quality_type = D010
+intent_category = engineering
+material = generic_pla
+variant = DBE 0.40mm
+
+[values]
+jerk_wall = 5
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+wall_thickness = =line_width * 3
+top_bottom_thickness = =wall_thickness
+xy_offset = =-layer_height * 0.2
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_accurate_C.inst.cfg b/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_accurate_C.inst.cfg
new file mode 100644
index 0000000000..a399ebbb3a
--- /dev/null
+++ b/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_accurate_C.inst.cfg
@@ -0,0 +1,21 @@
+[general]
+version = 4
+name = Accurate
+definition = deltacomb_base
+
+[metadata]
+setting_version = 18
+type = intent
+quality_type = D015
+intent_category = engineering
+material = generic_pla
+variant = DBE 0.40mm
+
+[values]
+jerk_wall = 5
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+wall_thickness = =line_width * 3
+top_bottom_thickness = =wall_thickness
+xy_offset = =-layer_height * 0.2
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_accurate_D.inst.cfg b/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_accurate_D.inst.cfg
new file mode 100644
index 0000000000..48735864f1
--- /dev/null
+++ b/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_accurate_D.inst.cfg
@@ -0,0 +1,21 @@
+[general]
+version = 4
+name = Accurate
+definition = deltacomb_base
+
+[metadata]
+setting_version = 18
+type = intent
+quality_type = D020
+intent_category = engineering
+material = generic_pla
+variant = DBE 0.40mm
+
+[values]
+jerk_wall = 5
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+wall_thickness = =line_width * 3
+top_bottom_thickness = =wall_thickness
+xy_offset = =-layer_height * 0.2
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_quick_D.inst.cfg b/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_quick_D.inst.cfg
new file mode 100644
index 0000000000..ee5cbfaaf2
--- /dev/null
+++ b/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_quick_D.inst.cfg
@@ -0,0 +1,31 @@
+[general]
+version = 4
+name = Quick
+definition = deltacomb_base
+
+[metadata]
+setting_version = 18
+type = intent
+quality_type = D020
+intent_category = quick
+material = generic_pla
+variant = DBE 0.40mm
+
+[values]
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 2
+fill_perimeter_gaps = nowhere
+infill_sparse_density = 15
+infill_line_width = =line_width
+jerk_print = 30
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+line_width = =machine_nozzle_size
+wall_line_width_x = =line_width
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_quick_E.inst.cfg b/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_quick_E.inst.cfg
new file mode 100644
index 0000000000..f212c4180a
--- /dev/null
+++ b/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_quick_E.inst.cfg
@@ -0,0 +1,31 @@
+[general]
+version = 4
+name = Quick
+definition = deltacomb_base
+
+[metadata]
+setting_version = 18
+type = intent
+quality_type = D030
+intent_category = quick
+material = generic_pla
+variant = DBE 0.40mm
+
+[values]
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 2
+fill_perimeter_gaps = nowhere
+infill_sparse_density = 15
+infill_line_width = =line_width
+jerk_print = 30
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+line_width = =machine_nozzle_size
+wall_line_width_x = =line_width
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_accurate_B.inst.cfg b/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_accurate_B.inst.cfg
new file mode 100644
index 0000000000..10dd614c10
--- /dev/null
+++ b/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_accurate_B.inst.cfg
@@ -0,0 +1,21 @@
+[general]
+version = 4
+name = Accurate
+definition = deltacomb_base
+
+[metadata]
+setting_version = 18
+type = intent
+quality_type = D010
+intent_category = engineering
+material = generic_pla
+variant = FBE 0.40mm
+
+[values]
+jerk_wall = 5
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+wall_thickness = =line_width * 3
+top_bottom_thickness = =wall_thickness
+xy_offset = =-layer_height * 0.2
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_accurate_C.inst.cfg b/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_accurate_C.inst.cfg
new file mode 100644
index 0000000000..a0c2bc3b2a
--- /dev/null
+++ b/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_accurate_C.inst.cfg
@@ -0,0 +1,21 @@
+[general]
+version = 4
+name = Accurate
+definition = deltacomb_base
+
+[metadata]
+setting_version = 18
+type = intent
+quality_type = D015
+intent_category = engineering
+material = generic_pla
+variant = FBE 0.40mm
+
+[values]
+jerk_wall = 5
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+wall_thickness = =line_width * 3
+top_bottom_thickness = =wall_thickness
+xy_offset = =-layer_height * 0.2
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_accurate_D.inst.cfg b/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_accurate_D.inst.cfg
new file mode 100644
index 0000000000..9bd67746ad
--- /dev/null
+++ b/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_accurate_D.inst.cfg
@@ -0,0 +1,21 @@
+[general]
+version = 4
+name = Accurate
+definition = deltacomb_base
+
+[metadata]
+setting_version = 18
+type = intent
+quality_type = D020
+intent_category = engineering
+material = generic_pla
+variant = FBE 0.40mm
+
+[values]
+jerk_wall = 5
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+wall_thickness = =line_width * 3
+top_bottom_thickness = =wall_thickness
+xy_offset = =-layer_height * 0.2
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_quick_D.inst.cfg b/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_quick_D.inst.cfg
new file mode 100644
index 0000000000..a7060948ed
--- /dev/null
+++ b/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_quick_D.inst.cfg
@@ -0,0 +1,31 @@
+[general]
+version = 4
+name = Quick
+definition = deltacomb_base
+
+[metadata]
+setting_version = 18
+type = intent
+quality_type = D020
+intent_category = quick
+material = generic_pla
+variant = FBE 0.40mm
+
+[values]
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 2
+fill_perimeter_gaps = nowhere
+infill_sparse_density = 15
+infill_line_width = =line_width
+jerk_print = 30
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+line_width = =machine_nozzle_size
+wall_line_width_x = =line_width
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_quick_E.inst.cfg b/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_quick_E.inst.cfg
new file mode 100644
index 0000000000..f7bd2425fb
--- /dev/null
+++ b/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_quick_E.inst.cfg
@@ -0,0 +1,31 @@
+[general]
+version = 4
+name = Quick
+definition = deltacomb_base
+
+[metadata]
+setting_version = 18
+type = intent
+quality_type = D030
+intent_category = quick
+material = generic_pla
+variant = FBE 0.40mm
+
+[values]
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 2
+fill_perimeter_gaps = nowhere
+infill_sparse_density = 15
+infill_line_width = =line_width
+jerk_print = 30
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+line_width = =machine_nozzle_size
+wall_line_width_x = =line_width
\ No newline at end of file
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print_Accurate.inst.cfg
new file mode 100644
index 0000000000..61fcc260d6
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print_Accurate.inst.cfg
@@ -0,0 +1,35 @@
+[general]

+version = 4

+name = Accurate

+definition = ultimaker_s3

+

+[metadata]

+setting_version = 18

+type = intent

+intent_category = engineering

+quality_type = fast

+material = generic_petg

+variant = AA 0.4

+

+[values]

+infill_line_width = =line_width

+jerk_print = 30

+jerk_infill = =jerk_print

+jerk_topbottom = =jerk_print

+jerk_wall = =jerk_print

+jerk_wall_0 = =jerk_wall

+jerk_wall_x = =jerk_wall

+jerk_layer_0 = 5

+line_width = =machine_nozzle_size

+speed_print = 30

+speed_infill = =speed_print

+speed_layer_0 = 20

+speed_topbottom = =speed_print

+speed_wall = =speed_print

+speed_wall_0 = =speed_wall

+speed_wall_x = =speed_wall

+top_bottom_thickness = =wall_thickness

+wall_line_width_x = =line_width

+wall_thickness = =line_width * 3

+xy_offset = =-layer_height * 0.2

+

diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg
new file mode 100644
index 0000000000..61494f64c9
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg
@@ -0,0 +1,35 @@
+[general]

+version = 4

+name = Accurate

+definition = ultimaker_s3

+

+[metadata]

+setting_version = 18

+type = intent

+intent_category = engineering

+quality_type = normal

+material = generic_petg

+variant = AA 0.4

+

+[values]

+infill_line_width = =line_width

+jerk_print = 30

+jerk_infill = =jerk_print

+jerk_topbottom = =jerk_print

+jerk_wall = =jerk_print

+jerk_wall_0 = =jerk_wall

+jerk_wall_x = =jerk_wall

+jerk_layer_0 = 5

+line_width = =machine_nozzle_size

+speed_print = 30

+speed_infill = =speed_print

+speed_layer_0 = 20

+speed_topbottom = =speed_print

+speed_wall = =speed_print

+speed_wall_0 = =speed_wall

+speed_wall_x = =speed_wall

+top_bottom_thickness = =wall_thickness

+wall_line_width_x = =line_width

+wall_thickness = =line_width * 3

+xy_offset = =-layer_height * 0.2

+

diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print_Accurate.inst.cfg
new file mode 100644
index 0000000000..a08849d786
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print_Accurate.inst.cfg
@@ -0,0 +1,36 @@
+[general]

+version = 4

+name = Accurate

+definition = ultimaker_s5

+

+[metadata]

+setting_version = 18

+type = intent

+intent_category = engineering

+quality_type = fast

+material = generic_petg

+variant = AA 0.4

+

+[values]

+infill_line_width = =line_width

+jerk_print = 30

+jerk_infill = =jerk_print

+jerk_topbottom = =jerk_print

+jerk_wall = =jerk_print

+jerk_wall_0 = =jerk_wall

+jerk_wall_x = =jerk_wall

+jerk_layer_0 = 5

+line_width = =machine_nozzle_size

+speed_print = 30

+speed_infill = =speed_print

+speed_layer_0 = 20

+speed_topbottom = =speed_print

+speed_wall = =speed_print

+speed_wall_0 = =speed_wall

+speed_wall_x = =speed_wall

+top_bottom_thickness = =wall_thickness

+wall_line_width_x = =line_width

+wall_thickness = =line_width * 3

+xy_offset = =-layer_height * 0.2

+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset

+

diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg
new file mode 100644
index 0000000000..ddf44a45e8
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg
@@ -0,0 +1,36 @@
+[general]

+version = 4

+name = Accurate

+definition = ultimaker_s5

+

+[metadata]

+setting_version = 18

+type = intent

+intent_category = engineering

+quality_type = normal

+material = generic_petg

+variant = AA 0.4

+

+[values]

+infill_line_width = =line_width

+jerk_print = 30

+jerk_infill = =jerk_print

+jerk_topbottom = =jerk_print

+jerk_wall = =jerk_print

+jerk_wall_0 = =jerk_wall

+jerk_wall_x = =jerk_wall

+jerk_layer_0 = 5

+line_width = =machine_nozzle_size

+speed_print = 30

+speed_infill = =speed_print

+speed_layer_0 = 20

+speed_topbottom = =speed_print

+speed_wall = =speed_print

+speed_wall_0 = =speed_wall

+speed_wall_x = =speed_wall

+top_bottom_thickness = =wall_thickness

+wall_line_width_x = =line_width

+wall_thickness = =line_width * 3

+xy_offset = =-layer_height * 0.2

+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset

+