New Deltacomb 3D Printer Series profiles

30 files changed, 792 insertions, 0 deletions

diff --git a/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_PLA_accurate_B.inst.cfg b/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_PLA_accurate_B.inst.cfg
new file mode 100644
index 0000000000..857bd6b119
--- /dev/null
+++ b/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_PLA_accurate_B.inst.cfg
@@ -0,0 +1,22 @@
+[general]
+version = 4
+name = Accurate
+definition = deltacomb_base
+
+[metadata]
+setting_version = 16
+type = intent
+quality_type = D010
+intent_category = engineering
+material = generic_abs
+variant = DBE 0.40mm
+
+[values]
+jerk_wall = 5
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+wall_thickness = =line_width * 3
+top_bottom_thickness = =wall_thickness
+xy_offset = =-layer_height * 0.2
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
\ No newline at end of file
diff --git a/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_PLA_accurate_C.inst.cfg b/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_PLA_accurate_C.inst.cfg
new file mode 100644
index 0000000000..e480aaa23a
--- /dev/null
+++ b/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_PLA_accurate_C.inst.cfg
@@ -0,0 +1,22 @@
+[general]
+version = 4
+name = Accurate
+definition = deltacomb_base
+
+[metadata]
+setting_version = 16
+type = intent
+quality_type = D015
+intent_category = engineering
+material = generic_abs
+variant = DBE 0.40mm
+
+[values]
+jerk_wall = 5
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+wall_thickness = =line_width * 3
+top_bottom_thickness = =wall_thickness
+xy_offset = =-layer_height * 0.2
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
\ No newline at end of file
diff --git a/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_PLA_accurate_D.inst.cfg b/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_PLA_accurate_D.inst.cfg
new file mode 100644
index 0000000000..75ae71ee42
--- /dev/null
+++ b/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_PLA_accurate_D.inst.cfg
@@ -0,0 +1,22 @@
+[general]
+version = 4
+name = Accurate
+definition = deltacomb_base
+
+[metadata]
+setting_version = 16
+type = intent
+quality_type = D020
+intent_category = engineering
+material = generic_abs
+variant = DBE 0.40mm
+
+[values]
+jerk_wall = 5
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+wall_thickness = =line_width * 3
+top_bottom_thickness = =wall_thickness
+xy_offset = =-layer_height * 0.2
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
\ No newline at end of file
diff --git a/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_PLA_quick_D.inst.cfg b/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_PLA_quick_D.inst.cfg
new file mode 100644
index 0000000000..540fb373e4
--- /dev/null
+++ b/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_PLA_quick_D.inst.cfg
@@ -0,0 +1,33 @@
+[general]
+version = 4
+name = Quick
+definition = deltacomb_base
+
+[metadata]
+setting_version = 16
+type = intent
+quality_type = D020
+intent_category = quick
+material = generic_abs
+variant = DBE 0.40mm
+
+[values]
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 2
+fill_perimeter_gaps = nowhere
+infill_sparse_density = 15
+infill_line_width = =line_width
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+line_width = =machine_nozzle_size
+wall_line_width_x = =line_width
\ No newline at end of file
diff --git a/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_PLA_quick_E.inst.cfg b/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_PLA_quick_E.inst.cfg
new file mode 100644
index 0000000000..7d4b7db0ab
--- /dev/null
+++ b/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_PLA_quick_E.inst.cfg
@@ -0,0 +1,33 @@
+[general]
+version = 4
+name = Quick
+definition = deltacomb_base
+
+[metadata]
+setting_version = 16
+type = intent
+quality_type = D030
+intent_category = quick
+material = generic_abs
+variant = DBE 0.40mm
+
+[values]
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 2
+fill_perimeter_gaps = nowhere
+infill_sparse_density = 15
+infill_line_width = =line_width
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+line_width = =machine_nozzle_size
+wall_line_width_x = =line_width
\ No newline at end of file
diff --git a/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_PLA_accurate_B.inst.cfg b/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_PLA_accurate_B.inst.cfg
new file mode 100644
index 0000000000..d9c55bb390
--- /dev/null
+++ b/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_PLA_accurate_B.inst.cfg
@@ -0,0 +1,22 @@
+[general]
+version = 4
+name = Accurate
+definition = deltacomb_base
+
+[metadata]
+setting_version = 16
+type = intent
+quality_type = D010
+intent_category = engineering
+material = generic_abs
+variant = FBE 0.40mm
+
+[values]
+jerk_wall = 5
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+wall_thickness = =line_width * 3
+top_bottom_thickness = =wall_thickness
+xy_offset = =-layer_height * 0.2
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
\ No newline at end of file
diff --git a/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_PLA_accurate_C.inst.cfg b/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_PLA_accurate_C.inst.cfg
new file mode 100644
index 0000000000..9289b8447d
--- /dev/null
+++ b/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_PLA_accurate_C.inst.cfg
@@ -0,0 +1,22 @@
+[general]
+version = 4
+name = Accurate
+definition = deltacomb_base
+
+[metadata]
+setting_version = 16
+type = intent
+quality_type = D015
+intent_category = engineering
+material = generic_abs
+variant = FBE 0.40mm
+
+[values]
+jerk_wall = 5
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+wall_thickness = =line_width * 3
+top_bottom_thickness = =wall_thickness
+xy_offset = =-layer_height * 0.2
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
\ No newline at end of file
diff --git a/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_PLA_accurate_D.inst.cfg b/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_PLA_accurate_D.inst.cfg
new file mode 100644
index 0000000000..7ffb181465
--- /dev/null
+++ b/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_PLA_accurate_D.inst.cfg
@@ -0,0 +1,22 @@
+[general]
+version = 4
+name = Accurate
+definition = deltacomb_base
+
+[metadata]
+setting_version = 16
+type = intent
+quality_type = D020
+intent_category = engineering
+material = generic_abs
+variant = FBE 0.40mm
+
+[values]
+jerk_wall = 5
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+wall_thickness = =line_width * 3
+top_bottom_thickness = =wall_thickness
+xy_offset = =-layer_height * 0.2
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
\ No newline at end of file
diff --git a/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_PLA_quick_D.inst.cfg b/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_PLA_quick_D.inst.cfg
new file mode 100644
index 0000000000..a0fa707740
--- /dev/null
+++ b/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_PLA_quick_D.inst.cfg
@@ -0,0 +1,33 @@
+[general]
+version = 4
+name = Quick
+definition = deltacomb_base
+
+[metadata]
+setting_version = 16
+type = intent
+quality_type = D020
+intent_category = quick
+material = generic_abs
+variant = FBE 0.40mm
+
+[values]
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 2
+fill_perimeter_gaps = nowhere
+infill_sparse_density = 15
+infill_line_width = =line_width
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+line_width = =machine_nozzle_size
+wall_line_width_x = =line_width
\ No newline at end of file
diff --git a/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_PLA_quick_E.inst.cfg b/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_PLA_quick_E.inst.cfg
new file mode 100644
index 0000000000..bc0efb790f
--- /dev/null
+++ b/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_PLA_quick_E.inst.cfg
@@ -0,0 +1,33 @@
+[general]
+version = 4
+name = Quick
+definition = deltacomb_base
+
+[metadata]
+setting_version = 16
+type = intent
+quality_type = D030
+intent_category = quick
+material = generic_abs
+variant = FBE 0.40mm
+
+[values]
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 2
+fill_perimeter_gaps = nowhere
+infill_sparse_density = 15
+infill_line_width = =line_width
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+line_width = =machine_nozzle_size
+wall_line_width_x = =line_width
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_accurate_B.inst.cfg b/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_accurate_B.inst.cfg
new file mode 100644
index 0000000000..434d87f9a0
--- /dev/null
+++ b/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_accurate_B.inst.cfg
@@ -0,0 +1,22 @@
+[general]
+version = 4
+name = Accurate
+definition = deltacomb_base
+
+[metadata]
+setting_version = 16
+type = intent
+quality_type = D010
+intent_category = engineering
+material = generic_petg
+variant = DBE 0.40mm
+
+[values]
+jerk_wall = 5
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+wall_thickness = =line_width * 3
+top_bottom_thickness = =wall_thickness
+xy_offset = =-layer_height * 0.2
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_accurate_C.inst.cfg b/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_accurate_C.inst.cfg
new file mode 100644
index 0000000000..12183cc6fb
--- /dev/null
+++ b/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_accurate_C.inst.cfg
@@ -0,0 +1,22 @@
+[general]
+version = 4
+name = Accurate
+definition = deltacomb_base
+
+[metadata]
+setting_version = 16
+type = intent
+quality_type = D015
+intent_category = engineering
+material = generic_petg
+variant = DBE 0.40mm
+
+[values]
+jerk_wall = 5
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+wall_thickness = =line_width * 3
+top_bottom_thickness = =wall_thickness
+xy_offset = =-layer_height * 0.2
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_accurate_D.inst.cfg b/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_accurate_D.inst.cfg
new file mode 100644
index 0000000000..be0fb6b61a
--- /dev/null
+++ b/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_accurate_D.inst.cfg
@@ -0,0 +1,22 @@
+[general]
+version = 4
+name = Accurate
+definition = deltacomb_base
+
+[metadata]
+setting_version = 16
+type = intent
+quality_type = D020
+intent_category = engineering
+material = generic_petg
+variant = DBE 0.40mm
+
+[values]
+jerk_wall = 5
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+wall_thickness = =line_width * 3
+top_bottom_thickness = =wall_thickness
+xy_offset = =-layer_height * 0.2
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_quick_D.inst.cfg b/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_quick_D.inst.cfg
new file mode 100644
index 0000000000..cf0d69f89e
--- /dev/null
+++ b/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_quick_D.inst.cfg
@@ -0,0 +1,33 @@
+[general]
+version = 4
+name = Quick
+definition = deltacomb_base
+
+[metadata]
+setting_version = 16
+type = intent
+quality_type = D020
+intent_category = quick
+material = generic_petg
+variant = DBE 0.40mm
+
+[values]
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 2
+fill_perimeter_gaps = nowhere
+infill_sparse_density = 15
+infill_line_width = =line_width
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+line_width = =machine_nozzle_size
+wall_line_width_x = =line_width
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_quick_E.inst.cfg b/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_quick_E.inst.cfg
new file mode 100644
index 0000000000..15fee129b9
--- /dev/null
+++ b/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_quick_E.inst.cfg
@@ -0,0 +1,33 @@
+[general]
+version = 4
+name = Quick
+definition = deltacomb_base
+
+[metadata]
+setting_version = 16
+type = intent
+quality_type = D030
+intent_category = quick
+material = generic_petg
+variant = DBE 0.40mm
+
+[values]
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 2
+fill_perimeter_gaps = nowhere
+infill_sparse_density = 15
+infill_line_width = =line_width
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+line_width = =machine_nozzle_size
+wall_line_width_x = =line_width
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_accurate_B.inst.cfg b/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_accurate_B.inst.cfg
new file mode 100644
index 0000000000..1d38bc2ec7
--- /dev/null
+++ b/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_accurate_B.inst.cfg
@@ -0,0 +1,22 @@
+[general]
+version = 4
+name = Accurate
+definition = deltacomb_base
+
+[metadata]
+setting_version = 16
+type = intent
+quality_type = D010
+intent_category = engineering
+material = generic_petg
+variant = FBE 0.40mm
+
+[values]
+jerk_wall = 5
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+wall_thickness = =line_width * 3
+top_bottom_thickness = =wall_thickness
+xy_offset = =-layer_height * 0.2
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_accurate_C.inst.cfg b/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_accurate_C.inst.cfg
new file mode 100644
index 0000000000..604f3b1a17
--- /dev/null
+++ b/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_accurate_C.inst.cfg
@@ -0,0 +1,22 @@
+[general]
+version = 4
+name = Accurate
+definition = deltacomb_base
+
+[metadata]
+setting_version = 16
+type = intent
+quality_type = D015
+intent_category = engineering
+material = generic_petg
+variant = FBE 0.40mm
+
+[values]
+jerk_wall = 5
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+wall_thickness = =line_width * 3
+top_bottom_thickness = =wall_thickness
+xy_offset = =-layer_height * 0.2
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_accurate_D.inst.cfg b/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_accurate_D.inst.cfg
new file mode 100644
index 0000000000..bf4adf4ed0
--- /dev/null
+++ b/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_accurate_D.inst.cfg
@@ -0,0 +1,22 @@
+[general]
+version = 4
+name = Accurate
+definition = deltacomb_base
+
+[metadata]
+setting_version = 16
+type = intent
+quality_type = D020
+intent_category = engineering
+material = generic_petg
+variant = FBE 0.40mm
+
+[values]
+jerk_wall = 5
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+wall_thickness = =line_width * 3
+top_bottom_thickness = =wall_thickness
+xy_offset = =-layer_height * 0.2
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_quick_D.inst.cfg b/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_quick_D.inst.cfg
new file mode 100644
index 0000000000..96078834da
--- /dev/null
+++ b/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_quick_D.inst.cfg
@@ -0,0 +1,33 @@
+[general]
+version = 4
+name = Quick
+definition = deltacomb_base
+
+[metadata]
+setting_version = 16
+type = intent
+quality_type = D020
+intent_category = quick
+material = generic_petg
+variant = FBE 0.40mm
+
+[values]
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 2
+fill_perimeter_gaps = nowhere
+infill_sparse_density = 15
+infill_line_width = =line_width
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+line_width = =machine_nozzle_size
+wall_line_width_x = =line_width
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_quick_E.inst.cfg b/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_quick_E.inst.cfg
new file mode 100644
index 0000000000..74c3e63d3f
--- /dev/null
+++ b/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_quick_E.inst.cfg
@@ -0,0 +1,33 @@
+[general]
+version = 4
+name = Quick
+definition = deltacomb_base
+
+[metadata]
+setting_version = 16
+type = intent
+quality_type = D030
+intent_category = quick
+material = generic_petg
+variant = FBE 0.40mm
+
+[values]
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 2
+fill_perimeter_gaps = nowhere
+infill_sparse_density = 15
+infill_line_width = =line_width
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+line_width = =machine_nozzle_size
+wall_line_width_x = =line_width
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_accurate_B.inst.cfg b/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_accurate_B.inst.cfg
new file mode 100644
index 0000000000..4ad1c79888
--- /dev/null
+++ b/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_accurate_B.inst.cfg
@@ -0,0 +1,22 @@
+[general]
+version = 4
+name = Accurate
+definition = deltacomb_base
+
+[metadata]
+setting_version = 16
+type = intent
+quality_type = D010
+intent_category = engineering
+material = generic_pla
+variant = DBE 0.40mm
+
+[values]
+jerk_wall = 5
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+wall_thickness = =line_width * 3
+top_bottom_thickness = =wall_thickness
+xy_offset = =-layer_height * 0.2
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_accurate_C.inst.cfg b/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_accurate_C.inst.cfg
new file mode 100644
index 0000000000..380ac624f6
--- /dev/null
+++ b/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_accurate_C.inst.cfg
@@ -0,0 +1,22 @@
+[general]
+version = 4
+name = Accurate
+definition = deltacomb_base
+
+[metadata]
+setting_version = 16
+type = intent
+quality_type = D015
+intent_category = engineering
+material = generic_pla
+variant = DBE 0.40mm
+
+[values]
+jerk_wall = 5
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+wall_thickness = =line_width * 3
+top_bottom_thickness = =wall_thickness
+xy_offset = =-layer_height * 0.2
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_accurate_D.inst.cfg b/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_accurate_D.inst.cfg
new file mode 100644
index 0000000000..c59938fa78
--- /dev/null
+++ b/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_accurate_D.inst.cfg
@@ -0,0 +1,22 @@
+[general]
+version = 4
+name = Accurate
+definition = deltacomb_base
+
+[metadata]
+setting_version = 16
+type = intent
+quality_type = D020
+intent_category = engineering
+material = generic_pla
+variant = DBE 0.40mm
+
+[values]
+jerk_wall = 5
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+wall_thickness = =line_width * 3
+top_bottom_thickness = =wall_thickness
+xy_offset = =-layer_height * 0.2
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_quick_D.inst.cfg b/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_quick_D.inst.cfg
new file mode 100644
index 0000000000..2d61966a6c
--- /dev/null
+++ b/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_quick_D.inst.cfg
@@ -0,0 +1,33 @@
+[general]
+version = 4
+name = Quick
+definition = deltacomb_base
+
+[metadata]
+setting_version = 16
+type = intent
+quality_type = D020
+intent_category = quick
+material = generic_pla
+variant = DBE 0.40mm
+
+[values]
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 2
+fill_perimeter_gaps = nowhere
+infill_sparse_density = 15
+infill_line_width = =line_width
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+line_width = =machine_nozzle_size
+wall_line_width_x = =line_width
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_quick_E.inst.cfg b/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_quick_E.inst.cfg
new file mode 100644
index 0000000000..65943b864a
--- /dev/null
+++ b/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_quick_E.inst.cfg
@@ -0,0 +1,33 @@
+[general]
+version = 4
+name = Quick
+definition = deltacomb_base
+
+[metadata]
+setting_version = 16
+type = intent
+quality_type = D030
+intent_category = quick
+material = generic_pla
+variant = DBE 0.40mm
+
+[values]
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 2
+fill_perimeter_gaps = nowhere
+infill_sparse_density = 15
+infill_line_width = =line_width
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+line_width = =machine_nozzle_size
+wall_line_width_x = =line_width
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_accurate_B.inst.cfg b/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_accurate_B.inst.cfg
new file mode 100644
index 0000000000..8a743bd48c
--- /dev/null
+++ b/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_accurate_B.inst.cfg
@@ -0,0 +1,22 @@
+[general]
+version = 4
+name = Accurate
+definition = deltacomb_base
+
+[metadata]
+setting_version = 16
+type = intent
+quality_type = D010
+intent_category = engineering
+material = generic_pla
+variant = FBE 0.40mm
+
+[values]
+jerk_wall = 5
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+wall_thickness = =line_width * 3
+top_bottom_thickness = =wall_thickness
+xy_offset = =-layer_height * 0.2
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_accurate_C.inst.cfg b/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_accurate_C.inst.cfg
new file mode 100644
index 0000000000..4624cda075
--- /dev/null
+++ b/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_accurate_C.inst.cfg
@@ -0,0 +1,22 @@
+[general]
+version = 4
+name = Accurate
+definition = deltacomb_base
+
+[metadata]
+setting_version = 16
+type = intent
+quality_type = D015
+intent_category = engineering
+material = generic_pla
+variant = FBE 0.40mm
+
+[values]
+jerk_wall = 5
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+wall_thickness = =line_width * 3
+top_bottom_thickness = =wall_thickness
+xy_offset = =-layer_height * 0.2
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_accurate_D.inst.cfg b/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_accurate_D.inst.cfg
new file mode 100644
index 0000000000..80e962e7d6
--- /dev/null
+++ b/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_accurate_D.inst.cfg
@@ -0,0 +1,22 @@
+[general]
+version = 4
+name = Accurate
+definition = deltacomb_base
+
+[metadata]
+setting_version = 16
+type = intent
+quality_type = D020
+intent_category = engineering
+material = generic_pla
+variant = FBE 0.40mm
+
+[values]
+jerk_wall = 5
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+wall_thickness = =line_width * 3
+top_bottom_thickness = =wall_thickness
+xy_offset = =-layer_height * 0.2
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_quick_D.inst.cfg b/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_quick_D.inst.cfg
new file mode 100644
index 0000000000..232cee0ec3
--- /dev/null
+++ b/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_quick_D.inst.cfg
@@ -0,0 +1,33 @@
+[general]
+version = 4
+name = Quick
+definition = deltacomb_base
+
+[metadata]
+setting_version = 16
+type = intent
+quality_type = D020
+intent_category = quick
+material = generic_pla
+variant = FBE 0.40mm
+
+[values]
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 2
+fill_perimeter_gaps = nowhere
+infill_sparse_density = 15
+infill_line_width = =line_width
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+line_width = =machine_nozzle_size
+wall_line_width_x = =line_width
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_quick_E.inst.cfg b/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_quick_E.inst.cfg
new file mode 100644
index 0000000000..77a09ff153
--- /dev/null
+++ b/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_quick_E.inst.cfg
@@ -0,0 +1,33 @@
+[general]
+version = 4
+name = Quick
+definition = deltacomb_base
+
+[metadata]
+setting_version = 16
+type = intent
+quality_type = D030
+intent_category = quick
+material = generic_pla
+variant = FBE 0.40mm
+
+[values]
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 2
+fill_perimeter_gaps = nowhere
+infill_sparse_density = 15
+infill_line_width = =line_width
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+line_width = =machine_nozzle_size
+wall_line_width_x = =line_width
\ No newline at end of file