Merge branch 'master' of github.com:Ultimaker/Cura into CURA-6522_one_at_a_time_overlapping_build_area

36 files changed, 312 insertions, 6 deletions

diff --git a/resources/intent/um_s3_aa0.4_ABS_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print_Quick.inst.cfg
index a9092bb48e..7f2445d18e 100644
--- a/resources/intent/um_s3_aa0.4_ABS_Draft_Print_Quick.inst.cfg
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print_Quick.inst.cfg
@@ -6,7 +6,7 @@ definition = ultimaker_s3
 [metadata]
 setting_version = 11
 type = intent
-intent_category = smooth
+intent_category = quick
 quality_type = draft
 material = generic_abs
 variant = AA 0.4
diff --git a/resources/intent/um_s3_aa0.4_ABS_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print_Accurate.inst.cfg
index a1d50aae0f..a1d50aae0f 100644
--- a/resources/intent/um_s3_aa0.4_ABS_Fast_Print_Accurate.inst.cfg
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print_Accurate.inst.cfg
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Visual.inst.cfg
new file mode 100644
index 0000000000..35d0d86ab3
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Visual
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 10
+type = intent
+quality_type = fast
+intent_category = visual
+material = generic_abs
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+wall_thickness = =wall_line_width * 3
+top_bottom_thickness = =wall_thickness
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_High_Visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_High_Visual.inst.cfg
new file mode 100644
index 0000000000..2b656dbc35
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_High_Visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Visual
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 10
+type = intent
+quality_type = high
+intent_category = visual
+material = generic_abs
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+wall_thickness = =wall_line_width * 3
+top_bottom_thickness = =wall_thickness
diff --git a/resources/intent/um_s3_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg
index 26c5029924..26c5029924 100644
--- a/resources/intent/um_s3_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Visual.inst.cfg
new file mode 100644
index 0000000000..aff1d9d9f0
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Visual
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 10
+type = intent
+quality_type = normal
+intent_category = visual
+material = generic_abs
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+wall_thickness = =wall_line_width * 3
+top_bottom_thickness = =wall_thickness
diff --git a/resources/intent/um_s3_aa0.4_PLA_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print_Quick.inst.cfg
index da6cb7f4e1..df562e7dd5 100644
--- a/resources/intent/um_s3_aa0.4_PLA_Draft_Print_Quick.inst.cfg
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print_Quick.inst.cfg
@@ -6,7 +6,7 @@ definition = ultimaker_s3
 [metadata]
 setting_version = 11
 type = intent
-intent_category = smooth
+intent_category = quick
 quality_type = draft
 material = generic_pla
 variant = AA 0.4
diff --git a/resources/intent/um_s3_aa0.4_PLA_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print_Accurate.inst.cfg
index 63aa092cf1..63aa092cf1 100644
--- a/resources/intent/um_s3_aa0.4_PLA_Fast_Print_Accurate.inst.cfg
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print_Accurate.inst.cfg
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Visual.inst.cfg
new file mode 100644
index 0000000000..92ea0837fe
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Visual
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 10
+type = intent
+quality_type = fast
+intent_category = visual
+material = generic_pla
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+wall_thickness = =wall_line_width * 3
+top_bottom_thickness = =wall_thickness
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_High_Visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_High_Visual.inst.cfg
new file mode 100644
index 0000000000..97c7ab325c
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_High_Visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Visual
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 10
+type = intent
+quality_type = high
+intent_category = visual
+material = generic_pla
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+wall_thickness = =wall_line_width * 3
+top_bottom_thickness = =wall_thickness
diff --git a/resources/intent/um_s3_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg
index 82fe5e807b..82fe5e807b 100644
--- a/resources/intent/um_s3_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Visual.inst.cfg
new file mode 100644
index 0000000000..e012264294
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Visual
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 10
+type = intent
+quality_type = normal
+intent_category = visual
+material = generic_pla
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+wall_thickness = =wall_line_width * 3
+top_bottom_thickness = =wall_thickness
diff --git a/resources/intent/um_s3_aa0.4_TPLA_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print_Quick.inst.cfg
index 16473bdcc5..9ee22f9a8a 100644
--- a/resources/intent/um_s3_aa0.4_TPLA_Draft_Print_Quick.inst.cfg
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print_Quick.inst.cfg
@@ -6,7 +6,7 @@ definition = ultimaker_s3
 [metadata]
 setting_version = 11
 type = intent
-intent_category = smooth
+intent_category = quick
 quality_type = draft
 material = generic_tough_pla
 variant = AA 0.4
diff --git a/resources/intent/um_s3_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg
index 865c53e4e8..865c53e4e8 100644
--- a/resources/intent/um_s3_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Visual.inst.cfg
new file mode 100644
index 0000000000..9debbb6d43
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Visual
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 10
+type = intent
+quality_type = fast
+intent_category = visual
+material = generic_tough_pla
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+wall_thickness = =wall_line_width * 3
+top_bottom_thickness = =wall_thickness
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_High_Visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_High_Visual.inst.cfg
new file mode 100644
index 0000000000..a57b040660
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_High_Visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Visual
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 10
+type = intent
+quality_type = high
+intent_category = visual
+material = generic_tough_pla
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+wall_thickness = =wall_line_width * 3
+top_bottom_thickness = =wall_thickness
diff --git a/resources/intent/um_s3_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg
index 36150f18a3..36150f18a3 100644
--- a/resources/intent/um_s3_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Visual.inst.cfg
new file mode 100644
index 0000000000..0f31bcce25
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Visual
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 10
+type = intent
+quality_type = normal
+intent_category = visual
+material = generic_tough_pla
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+wall_thickness = =wall_line_width * 3
+top_bottom_thickness = =wall_thickness
diff --git a/resources/intent/um_s5_aa0.4_ABS_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print_Quick.inst.cfg
index 74d97c9d75..1e7e808355 100644
--- a/resources/intent/um_s5_aa0.4_ABS_Draft_Print_Quick.inst.cfg
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print_Quick.inst.cfg
@@ -6,7 +6,7 @@ definition = ultimaker_s5
 [metadata]
 setting_version = 11
 type = intent
-intent_category = smooth
+intent_category = quick
 quality_type = draft
 material = generic_abs
 variant = AA 0.4
diff --git a/resources/intent/um_s5_aa0.4_ABS_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print_Accurate.inst.cfg
index 6aed5bf11a..6aed5bf11a 100644
--- a/resources/intent/um_s5_aa0.4_ABS_Fast_Print_Accurate.inst.cfg
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print_Accurate.inst.cfg
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Visual.inst.cfg
new file mode 100644
index 0000000000..0f10b8416b
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Visual
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 10
+type = intent
+quality_type = fast
+intent_category = visual
+material = generic_abs
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+wall_thickness = =wall_line_width * 3
+top_bottom_thickness = =wall_thickness
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_High_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_High_Visual.inst.cfg
new file mode 100644
index 0000000000..b6ea956563
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_High_Visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Visual
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 10
+type = intent
+quality_type = high
+intent_category = visual
+material = generic_abs
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+wall_thickness = =wall_line_width * 3
+top_bottom_thickness = =wall_thickness
diff --git a/resources/intent/um_s5_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg
index a141830f80..a141830f80 100644
--- a/resources/intent/um_s5_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Visual.inst.cfg
new file mode 100644
index 0000000000..f26003ca30
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Visual
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 10
+type = intent
+quality_type = normal
+intent_category = visual
+material = generic_abs
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+wall_thickness = =wall_line_width * 3
+top_bottom_thickness = =wall_thickness
diff --git a/resources/intent/um_s5_aa0.4_PLA_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print_Quick.inst.cfg
index 8ae79652e2..558a14dd4b 100644
--- a/resources/intent/um_s5_aa0.4_PLA_Draft_Print_Quick.inst.cfg
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print_Quick.inst.cfg
@@ -6,7 +6,7 @@ definition = ultimaker_s5
 [metadata]
 setting_version = 11
 type = intent
-intent_category = smooth
+intent_category = quick
 quality_type = draft
 material = generic_pla
 variant = AA 0.4
diff --git a/resources/intent/um_s5_aa0.4_PLA_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print_Accurate.inst.cfg
index d814866d39..d814866d39 100644
--- a/resources/intent/um_s5_aa0.4_PLA_Fast_Print_Accurate.inst.cfg
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print_Accurate.inst.cfg
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Visual.inst.cfg
new file mode 100644
index 0000000000..b20fdcb791
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Visual
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 10
+type = intent
+quality_type = fast
+intent_category = visual
+material = generic_pla
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+wall_thickness = =wall_line_width * 3
+top_bottom_thickness = =wall_thickness
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_High_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_High_Visual.inst.cfg
new file mode 100644
index 0000000000..3fc0006b3f
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_High_Visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Visual
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 10
+type = intent
+quality_type = high
+intent_category = visual
+material = generic_pla
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+wall_thickness = =wall_line_width * 3
+top_bottom_thickness = =wall_thickness
diff --git a/resources/intent/um_s5_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg
index b22b6ff4c2..b22b6ff4c2 100644
--- a/resources/intent/um_s5_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Visual.inst.cfg
new file mode 100644
index 0000000000..4138f62694
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Visual
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 10
+type = intent
+quality_type = normal
+intent_category = visual
+material = generic_pla
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+wall_thickness = =wall_line_width * 3
+top_bottom_thickness = =wall_thickness
diff --git a/resources/intent/um_s5_aa0.4_TPLA_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print_Quick.inst.cfg
index 37efd33670..d680a751a5 100644
--- a/resources/intent/um_s5_aa0.4_TPLA_Draft_Print_Quick.inst.cfg
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print_Quick.inst.cfg
@@ -6,7 +6,7 @@ definition = ultimaker_s5
 [metadata]
 setting_version = 11
 type = intent
-intent_category = smooth
+intent_category = quick
 quality_type = draft
 material = generic_tough_pla
 variant = AA 0.4
diff --git a/resources/intent/um_s5_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg
index 57ab6a727e..57ab6a727e 100644
--- a/resources/intent/um_s5_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Visual.inst.cfg
new file mode 100644
index 0000000000..3f5d3c566e
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Visual
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 10
+type = intent
+quality_type = fast
+intent_category = visual
+material = generic_tough_pla
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+wall_thickness = =wall_line_width * 3
+top_bottom_thickness = =wall_thickness
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_High_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_High_Visual.inst.cfg
new file mode 100644
index 0000000000..3b5d9fb3db
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_High_Visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Visual
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 10
+type = intent
+quality_type = high
+intent_category = visual
+material = generic_tough_pla
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+wall_thickness = =wall_line_width * 3
+top_bottom_thickness = =wall_thickness
diff --git a/resources/intent/um_s5_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg
index a5f878bf4f..a5f878bf4f 100644
--- a/resources/intent/um_s5_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Visual.inst.cfg
new file mode 100644
index 0000000000..d71bb76b35
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Visual
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 10
+type = intent
+quality_type = normal
+intent_category = visual
+material = generic_tough_pla
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+wall_thickness = =wall_line_width * 3
+top_bottom_thickness = =wall_thickness