I accidently deleted the files while testing the profile changes and committed without them. Restored the files.PP-126_set_horizontal_expansion

Relates to PP-126

60 files changed, 1752 insertions, 0 deletions

diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print_Quick.inst.cfg
new file mode 100644
index 0000000000..5028a193e1
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print_Quick.inst.cfg
@@ -0,0 +1,33 @@
+[general]
+version = 4
+name = Quick
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 19
+type = intent
+intent_category = quick
+quality_type = draft
+material = generic_abs
+variant = AA 0.4
+
+[values]
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_layer_0 = 20
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 2
+infill_sparse_density = 15
+
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print_Accurate.inst.cfg
new file mode 100644
index 0000000000..ce071c0e9f
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print_Accurate.inst.cfg
@@ -0,0 +1,33 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 19
+type = intent
+intent_category = engineering
+quality_type = fast
+material = generic_abs
+variant = AA 0.4
+
+[values]
+
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+
+wall_thickness = =line_width * 3
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Visual.inst.cfg
new file mode 100644
index 0000000000..03b3974996
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Visual
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 19
+type = intent
+quality_type = fast
+intent_category = visual
+material = generic_abs
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+wall_thickness = =wall_line_width * 3
+top_bottom_thickness = =wall_thickness
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_High_Visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_High_Visual.inst.cfg
new file mode 100644
index 0000000000..7d2fe3435c
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_High_Visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Visual
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 19
+type = intent
+quality_type = high
+intent_category = visual
+material = generic_abs
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+wall_thickness = =wall_line_width * 3
+top_bottom_thickness = =wall_thickness
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg
new file mode 100644
index 0000000000..962c23ba33
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg
@@ -0,0 +1,33 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 19
+type = intent
+intent_category = engineering
+quality_type = normal
+material = generic_abs
+variant = AA 0.4
+
+[values]
+
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+
+wall_thickness = =line_width * 3
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Visual.inst.cfg
new file mode 100644
index 0000000000..12c05d6a9a
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Visual
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 19
+type = intent
+quality_type = normal
+intent_category = visual
+material = generic_abs
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+wall_thickness = =wall_line_width * 3
+top_bottom_thickness = =wall_thickness
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg
new file mode 100644
index 0000000000..78221f4c28
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 19
+type = intent
+intent_category = engineering
+quality_type = fast
+material = generic_cpe_plus
+variant = AA 0.4
+
+[values]
+
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg
new file mode 100644
index 0000000000..ae44cf40a5
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 19
+type = intent
+intent_category = engineering
+quality_type = normal
+material = generic_cpe_plus
+variant = AA 0.4
+
+[values]
+
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print_Accurate.inst.cfg
new file mode 100644
index 0000000000..19dbd9c52e
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print_Accurate.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 19
+type = intent
+intent_category = engineering
+quality_type = fast
+material = generic_cpe
+variant = AA 0.4
+
+[values]
+
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg
new file mode 100644
index 0000000000..545c776b08
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 19
+type = intent
+intent_category = engineering
+quality_type = normal
+material = generic_cpe
+variant = AA 0.4
+
+[values]
+
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg
new file mode 100644
index 0000000000..053b3b710a
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 19
+type = intent
+intent_category = engineering
+quality_type = fast
+material = generic_nylon
+variant = AA 0.4
+
+[values]
+
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg
new file mode 100644
index 0000000000..3807904e2e
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 19
+type = intent
+intent_category = engineering
+quality_type = normal
+material = generic_nylon
+variant = AA 0.4
+
+[values]
+
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print_Accurate.inst.cfg
new file mode 100644
index 0000000000..563753fdf3
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print_Accurate.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 19
+type = intent
+intent_category = engineering
+quality_type = fast
+material = generic_pc
+variant = AA 0.4
+
+[values]
+
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality_Accurate.inst.cfg
new file mode 100644
index 0000000000..702b9b5eec
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality_Accurate.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 19
+type = intent
+intent_category = engineering
+quality_type = normal
+material = generic_pc
+variant = AA 0.4
+
+[values]
+
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print_Accurate.inst.cfg
new file mode 100644
index 0000000000..313a77d86f
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print_Accurate.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 19
+type = intent
+intent_category = engineering
+quality_type = fast
+material = generic_petg
+variant = AA 0.4
+
+[values]
+
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg
new file mode 100644
index 0000000000..7dde3d14c2
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 19
+type = intent
+intent_category = engineering
+quality_type = normal
+material = generic_petg
+variant = AA 0.4
+
+[values]
+
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+
+wall_thickness = =line_width * 3
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print_Quick.inst.cfg
new file mode 100644
index 0000000000..5d869888c5
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print_Quick.inst.cfg
@@ -0,0 +1,33 @@
+[general]
+version = 4
+name = Quick
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 19
+type = intent
+intent_category = quick
+quality_type = draft
+material = generic_pla
+variant = AA 0.4
+
+[values]
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_layer_0 = 20
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 2
+infill_sparse_density = 15
+
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print_Accurate.inst.cfg
new file mode 100644
index 0000000000..9cdee1381f
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print_Accurate.inst.cfg
@@ -0,0 +1,33 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 19
+type = intent
+intent_category = engineering
+quality_type = fast
+material = generic_pla
+variant = AA 0.4
+
+[values]
+
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+
+wall_thickness = =line_width * 3
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Visual.inst.cfg
new file mode 100644
index 0000000000..7b455965b6
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Visual
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 19
+type = intent
+quality_type = fast
+intent_category = visual
+material = generic_pla
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+wall_thickness = =wall_line_width * 3
+top_bottom_thickness = =wall_thickness
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_High_Visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_High_Visual.inst.cfg
new file mode 100644
index 0000000000..20eef0666e
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_High_Visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Visual
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 19
+type = intent
+quality_type = high
+intent_category = visual
+material = generic_pla
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+wall_thickness = =wall_line_width * 3
+top_bottom_thickness = =wall_thickness
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg
new file mode 100644
index 0000000000..358d5c517c
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg
@@ -0,0 +1,33 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 19
+type = intent
+intent_category = engineering
+quality_type = normal
+material = generic_pla
+variant = AA 0.4
+
+[values]
+
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+
+wall_thickness = =line_width * 3
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Visual.inst.cfg
new file mode 100644
index 0000000000..7826c9b0b2
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Visual
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 19
+type = intent
+quality_type = normal
+intent_category = visual
+material = generic_pla
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+wall_thickness = =wall_line_width * 3
+top_bottom_thickness = =wall_thickness
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg
new file mode 100644
index 0000000000..fdaf5f32ed
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg
@@ -0,0 +1,39 @@
+[general]
+version = 4
+name = Quick
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 19
+type = intent
+intent_category = quick
+quality_type = verydraft
+material = generic_pla
+variant = AA 0.4
+is_experimental = True
+
+[values]
+infill_sparse_density = 10
+
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+
+acceleration_print = 4000
+acceleration_wall = 2000
+acceleration_wall_0 = 2000
+
+speed_print = 50
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_layer_0 = 20
+
+wall_thickness = =line_width * 2
+top_bottom_thickness = =wall_thickness
\ No newline at end of file
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print_Quick.inst.cfg
new file mode 100644
index 0000000000..3dbb03b38c
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print_Quick.inst.cfg
@@ -0,0 +1,33 @@
+[general]
+version = 4
+name = Quick
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 19
+type = intent
+intent_category = quick
+quality_type = draft
+material = generic_tough_pla
+variant = AA 0.4
+
+[values]
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_layer_0 = 20
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 2
+infill_sparse_density = 15
+
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg
new file mode 100644
index 0000000000..b27355a79e
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg
@@ -0,0 +1,33 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 19
+type = intent
+intent_category = engineering
+quality_type = fast
+material = generic_tough_pla
+variant = AA 0.4
+
+[values]
+
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+
+wall_thickness = =line_width * 3
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Visual.inst.cfg
new file mode 100644
index 0000000000..c80e665041
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Visual
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 19
+type = intent
+quality_type = fast
+intent_category = visual
+material = generic_tough_pla
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+wall_thickness = =wall_line_width * 3
+top_bottom_thickness = =wall_thickness
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_High_Visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_High_Visual.inst.cfg
new file mode 100644
index 0000000000..5a0fdccf3c
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_High_Visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Visual
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 19
+type = intent
+quality_type = high
+intent_category = visual
+material = generic_tough_pla
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+wall_thickness = =wall_line_width * 3
+top_bottom_thickness = =wall_thickness
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg
new file mode 100644
index 0000000000..ffbd5785a0
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg
@@ -0,0 +1,33 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 19
+type = intent
+intent_category = engineering
+quality_type = normal
+material = generic_tough_pla
+variant = AA 0.4
+
+[values]
+
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+
+wall_thickness = =line_width * 3
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Visual.inst.cfg
new file mode 100644
index 0000000000..610fa16fcc
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Visual
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 19
+type = intent
+quality_type = normal
+intent_category = visual
+material = generic_tough_pla
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+wall_thickness = =wall_line_width * 3
+top_bottom_thickness = =wall_thickness
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg
new file mode 100644
index 0000000000..4ca187133e
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg
@@ -0,0 +1,39 @@
+[general]
+version = 4
+name = Quick
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 19
+type = intent
+intent_category = quick
+quality_type = verydraft
+material = generic_tough_pla
+variant = AA 0.4
+is_experimental = True
+
+[values]
+infill_sparse_density = 10
+
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+
+acceleration_print = 4000
+acceleration_wall = 2000
+acceleration_wall_0 = 2000
+
+speed_print = 50
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_layer_0 = 20
+
+wall_thickness = =line_width * 2
+top_bottom_thickness = =wall_thickness
\ No newline at end of file
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print_Quick.inst.cfg
new file mode 100644
index 0000000000..374cb1bca4
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print_Quick.inst.cfg
@@ -0,0 +1,33 @@
+[general]
+version = 4
+name = Quick
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 19
+type = intent
+intent_category = quick
+quality_type = draft
+material = generic_abs
+variant = AA 0.4
+
+[values]
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_layer_0 = 20
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 2
+infill_sparse_density = 15
+
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print_Accurate.inst.cfg
new file mode 100644
index 0000000000..39153f554f
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print_Accurate.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 19
+type = intent
+intent_category = engineering
+quality_type = fast
+material = generic_abs
+variant = AA 0.4
+
+[values]
+
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+
+wall_thickness = =line_width * 3
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Visual.inst.cfg
new file mode 100644
index 0000000000..45cba2271e
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Visual
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 19
+type = intent
+quality_type = fast
+intent_category = visual
+material = generic_abs
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+wall_thickness = =wall_line_width * 3
+top_bottom_thickness = =wall_thickness
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_High_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_High_Visual.inst.cfg
new file mode 100644
index 0000000000..3658a72539
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_High_Visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Visual
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 19
+type = intent
+quality_type = high
+intent_category = visual
+material = generic_abs
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+wall_thickness = =wall_line_width * 3
+top_bottom_thickness = =wall_thickness
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg
new file mode 100644
index 0000000000..8c6510d7d6
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 19
+type = intent
+intent_category = engineering
+quality_type = normal
+material = generic_abs
+variant = AA 0.4
+
+[values]
+
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+
+wall_thickness = =line_width * 3
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Visual.inst.cfg
new file mode 100644
index 0000000000..9633a2d6e8
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Visual
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 19
+type = intent
+quality_type = normal
+intent_category = visual
+material = generic_abs
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+wall_thickness = =wall_line_width * 3
+top_bottom_thickness = =wall_thickness
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg
new file mode 100644
index 0000000000..7d2f5ee686
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg
@@ -0,0 +1,35 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 19
+type = intent
+intent_category = engineering
+quality_type = fast
+material = generic_cpe_plus
+variant = AA 0.4
+
+[values]
+
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+
+wall_thickness = =line_width * 3
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg
new file mode 100644
index 0000000000..141284e636
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg
@@ -0,0 +1,35 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 19
+type = intent
+intent_category = engineering
+quality_type = normal
+material = generic_cpe_plus
+variant = AA 0.4
+
+[values]
+
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+
+wall_thickness = =line_width * 3
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print_Accurate.inst.cfg
new file mode 100644
index 0000000000..fceeafdeb7
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print_Accurate.inst.cfg
@@ -0,0 +1,35 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 19
+type = intent
+intent_category = engineering
+quality_type = fast
+material = generic_cpe
+variant = AA 0.4
+
+[values]
+
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+
+wall_thickness = =line_width * 3
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg
new file mode 100644
index 0000000000..d98a914046
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg
@@ -0,0 +1,35 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 19
+type = intent
+intent_category = engineering
+quality_type = normal
+material = generic_cpe
+variant = AA 0.4
+
+[values]
+
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+
+wall_thickness = =line_width * 3
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg
new file mode 100644
index 0000000000..479af8f737
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg
@@ -0,0 +1,35 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 19
+type = intent
+intent_category = engineering
+quality_type = fast
+material = generic_nylon
+variant = AA 0.4
+
+[values]
+
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+
+wall_thickness = =line_width * 3
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg
new file mode 100644
index 0000000000..96231ce051
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg
@@ -0,0 +1,35 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 19
+type = intent
+intent_category = engineering
+quality_type = normal
+material = generic_nylon
+variant = AA 0.4
+
+[values]
+
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+
+wall_thickness = =line_width * 3
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print_Accurate.inst.cfg
new file mode 100644
index 0000000000..ab630874d5
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print_Accurate.inst.cfg
@@ -0,0 +1,35 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 19
+type = intent
+intent_category = engineering
+quality_type = fast
+material = generic_pc
+variant = AA 0.4
+
+[values]
+
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+
+wall_thickness = =line_width * 3
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality_Accurate.inst.cfg
new file mode 100644
index 0000000000..e6644926dd
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality_Accurate.inst.cfg
@@ -0,0 +1,35 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 19
+type = intent
+intent_category = engineering
+quality_type = normal
+material = generic_pc
+variant = AA 0.4
+
+[values]
+
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+
+wall_thickness = =line_width * 3
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print_Accurate.inst.cfg
new file mode 100644
index 0000000000..b659129a76
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print_Accurate.inst.cfg
@@ -0,0 +1,35 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 19
+type = intent
+intent_category = engineering
+quality_type = fast
+material = generic_petg
+variant = AA 0.4
+
+[values]
+
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+
+wall_thickness = =line_width * 3
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg
new file mode 100644
index 0000000000..8022784344
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg
@@ -0,0 +1,35 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 19
+type = intent
+intent_category = engineering
+quality_type = normal
+material = generic_petg
+variant = AA 0.4
+
+[values]
+
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+
+wall_thickness = =line_width * 3
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print_Quick.inst.cfg
new file mode 100644
index 0000000000..25dcb1a793
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print_Quick.inst.cfg
@@ -0,0 +1,33 @@
+[general]
+version = 4
+name = Quick
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 19
+type = intent
+intent_category = quick
+quality_type = draft
+material = generic_pla
+variant = AA 0.4
+
+[values]
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_layer_0 = 20
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 2
+infill_sparse_density = 15
+
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print_Accurate.inst.cfg
new file mode 100644
index 0000000000..030a3699f1
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print_Accurate.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 19
+type = intent
+intent_category = engineering
+quality_type = fast
+material = generic_pla
+variant = AA 0.4
+
+[values]
+
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+
+wall_thickness = =line_width * 3
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Visual.inst.cfg
new file mode 100644
index 0000000000..ff6adc5257
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Visual
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 19
+type = intent
+quality_type = fast
+intent_category = visual
+material = generic_pla
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+wall_thickness = =wall_line_width * 3
+top_bottom_thickness = =wall_thickness
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_High_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_High_Visual.inst.cfg
new file mode 100644
index 0000000000..09c67fb20e
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_High_Visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Visual
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 19
+type = intent
+quality_type = high
+intent_category = visual
+material = generic_pla
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+wall_thickness = =wall_line_width * 3
+top_bottom_thickness = =wall_thickness
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg
new file mode 100644
index 0000000000..7737eff565
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 19
+type = intent
+intent_category = engineering
+quality_type = normal
+material = generic_pla
+variant = AA 0.4
+
+[values]
+
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+
+wall_thickness = =line_width * 3
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Visual.inst.cfg
new file mode 100644
index 0000000000..8934e3fd80
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Visual
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 19
+type = intent
+quality_type = normal
+intent_category = visual
+material = generic_pla
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+wall_thickness = =wall_line_width * 3
+top_bottom_thickness = =wall_thickness
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg
new file mode 100644
index 0000000000..a3f5b02ec2
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg
@@ -0,0 +1,39 @@
+[general]
+version = 4
+name = Quick
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 19
+type = intent
+intent_category = quick
+quality_type = verydraft
+material = generic_pla
+variant = AA 0.4
+is_experimental = True
+
+[values]
+infill_sparse_density = 10
+
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+
+acceleration_print = 4000
+acceleration_wall = 2000
+acceleration_wall_0 = 2000
+
+speed_print = 50
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_layer_0 = 20
+
+wall_thickness = =line_width * 2
+top_bottom_thickness = =wall_thickness
\ No newline at end of file
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print_Quick.inst.cfg
new file mode 100644
index 0000000000..a811b9d673
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print_Quick.inst.cfg
@@ -0,0 +1,33 @@
+[general]
+version = 4
+name = Quick
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 19
+type = intent
+intent_category = quick
+quality_type = draft
+material = generic_tough_pla
+variant = AA 0.4
+
+[values]
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_layer_0 = 20
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 2
+infill_sparse_density = 15
+
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg
new file mode 100644
index 0000000000..dbdbc9b1c7
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 19
+type = intent
+intent_category = engineering
+quality_type = fast
+material = generic_tough_pla
+variant = AA 0.4
+
+[values]
+
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+
+wall_thickness = =line_width * 3
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Visual.inst.cfg
new file mode 100644
index 0000000000..39292b0306
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Visual
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 19
+type = intent
+quality_type = fast
+intent_category = visual
+material = generic_tough_pla
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+wall_thickness = =wall_line_width * 3
+top_bottom_thickness = =wall_thickness
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_High_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_High_Visual.inst.cfg
new file mode 100644
index 0000000000..53eb8d16fd
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_High_Visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Visual
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 19
+type = intent
+quality_type = high
+intent_category = visual
+material = generic_tough_pla
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+wall_thickness = =wall_line_width * 3
+top_bottom_thickness = =wall_thickness
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg
new file mode 100644
index 0000000000..287917f2b5
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 19
+type = intent
+intent_category = engineering
+quality_type = normal
+material = generic_tough_pla
+variant = AA 0.4
+
+[values]
+
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+
+wall_thickness = =line_width * 3
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Visual.inst.cfg
new file mode 100644
index 0000000000..155f6177cc
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Visual.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Visual
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 19
+type = intent
+quality_type = normal
+intent_category = visual
+material = generic_tough_pla
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+wall_thickness = =wall_line_width * 3
+top_bottom_thickness = =wall_thickness
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg
new file mode 100644
index 0000000000..5d22b722af
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg
@@ -0,0 +1,39 @@
+[general]
+version = 4
+name = Quick
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 19
+type = intent
+intent_category = quick
+quality_type = verydraft
+material = generic_tough_pla
+variant = AA 0.4
+is_experimental = True
+
+[values]
+infill_sparse_density = 10
+
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+
+acceleration_print = 4000
+acceleration_wall = 2000
+acceleration_wall_0 = 2000
+
+speed_print = 50
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_layer_0 = 20
+
+wall_thickness = =line_width * 2
+top_bottom_thickness = =wall_thickness
\ No newline at end of file