Most recent updates

- Travel avoid supports
- Dual Extrusion : switch_extruder_retraction_amount = 10
- PETg updates
- Reduced infill jerk in "quick" intent and removed useless first layer jerk
- Removed no more used 1.2x material_flow_layer_0 in order to compensate a bad bed leveling
- Rewiewed forced PLA and PETg temperatures

32 files changed, 66 insertions, 46 deletions

diff --git a/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_ABS_accurate_B.inst.cfg b/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_ABS_accurate_B.inst.cfg
index d38a9e29fe..74f9f10d26 100644
--- a/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_ABS_accurate_B.inst.cfg
+++ b/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_ABS_accurate_B.inst.cfg
@@ -15,7 +15,6 @@ variant = DBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2
diff --git a/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_ABS_accurate_C.inst.cfg b/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_ABS_accurate_C.inst.cfg
index eec0cfdc02..71c004bc6a 100644
--- a/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_ABS_accurate_C.inst.cfg
+++ b/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_ABS_accurate_C.inst.cfg
@@ -15,7 +15,6 @@ variant = DBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2
diff --git a/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_ABS_accurate_D.inst.cfg b/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_ABS_accurate_D.inst.cfg
index 22a84af3a0..9f982b1f63 100644
--- a/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_ABS_accurate_D.inst.cfg
+++ b/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_ABS_accurate_D.inst.cfg
@@ -15,7 +15,6 @@ variant = DBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2
diff --git a/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_ABS_quick_D.inst.cfg b/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_ABS_quick_D.inst.cfg
index 04b8d042bc..1bbbd51e7d 100644
--- a/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_ABS_quick_D.inst.cfg
+++ b/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_ABS_quick_D.inst.cfg
@@ -23,11 +23,9 @@ fill_perimeter_gaps = nowhere
 infill_sparse_density = 15
 infill_line_width = =line_width
 jerk_print = 30
-jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
 jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 line_width = =machine_nozzle_size
 wall_line_width_x = =line_width
\ No newline at end of file
diff --git a/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_ABS_quick_E.inst.cfg b/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_ABS_quick_E.inst.cfg
index 94432a5fb3..a8a84d437c 100644
--- a/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_ABS_quick_E.inst.cfg
+++ b/resources/intent/deltacomb/ABS/deltacomb_DBE0.40_ABS_quick_E.inst.cfg
@@ -23,11 +23,9 @@ fill_perimeter_gaps = nowhere
 infill_sparse_density = 15
 infill_line_width = =line_width
 jerk_print = 30
-jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
 jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 line_width = =machine_nozzle_size
 wall_line_width_x = =line_width
\ No newline at end of file
diff --git a/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_ABS_accurate_B.inst.cfg b/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_ABS_accurate_B.inst.cfg
index f47e3fc20e..1d6228030a 100644
--- a/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_ABS_accurate_B.inst.cfg
+++ b/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_ABS_accurate_B.inst.cfg
@@ -15,7 +15,6 @@ variant = FBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2
diff --git a/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_ABS_accurate_C.inst.cfg b/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_ABS_accurate_C.inst.cfg
index e7cf837f7e..6adc06ee83 100644
--- a/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_ABS_accurate_C.inst.cfg
+++ b/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_ABS_accurate_C.inst.cfg
@@ -15,7 +15,6 @@ variant = FBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2
diff --git a/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_ABS_accurate_D.inst.cfg b/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_ABS_accurate_D.inst.cfg
index fda373b5cb..1036154204 100644
--- a/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_ABS_accurate_D.inst.cfg
+++ b/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_ABS_accurate_D.inst.cfg
@@ -15,7 +15,6 @@ variant = FBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2
diff --git a/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_ABS_quick_D.inst.cfg b/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_ABS_quick_D.inst.cfg
index 62615a6091..1ecb8d5bfb 100644
--- a/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_ABS_quick_D.inst.cfg
+++ b/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_ABS_quick_D.inst.cfg
@@ -23,11 +23,9 @@ fill_perimeter_gaps = nowhere
 infill_sparse_density = 15
 infill_line_width = =line_width
 jerk_print = 30
-jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
 jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 line_width = =machine_nozzle_size
 wall_line_width_x = =line_width
\ No newline at end of file
diff --git a/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_ABS_quick_E.inst.cfg b/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_ABS_quick_E.inst.cfg
index 4cfba01118..42e4efe351 100644
--- a/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_ABS_quick_E.inst.cfg
+++ b/resources/intent/deltacomb/ABS/deltacomb_FBE0.40_ABS_quick_E.inst.cfg
@@ -23,11 +23,9 @@ fill_perimeter_gaps = nowhere
 infill_sparse_density = 15
 infill_line_width = =line_width
 jerk_print = 30
-jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
 jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 line_width = =machine_nozzle_size
 wall_line_width_x = =line_width
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_accurate_B.inst.cfg b/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_accurate_B.inst.cfg
index 3b5848c52f..1bee0ae204 100644
--- a/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_accurate_B.inst.cfg
+++ b/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_accurate_B.inst.cfg
@@ -15,7 +15,6 @@ variant = DBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2
diff --git a/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_accurate_C.inst.cfg b/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_accurate_C.inst.cfg
index 1b0647d174..3eb2f4b665 100644
--- a/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_accurate_C.inst.cfg
+++ b/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_accurate_C.inst.cfg
@@ -15,7 +15,6 @@ variant = DBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2
diff --git a/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_accurate_D.inst.cfg b/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_accurate_D.inst.cfg
index 4ca0cfd713..150a0f9d42 100644
--- a/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_accurate_D.inst.cfg
+++ b/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_accurate_D.inst.cfg
@@ -15,7 +15,6 @@ variant = DBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2
diff --git a/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_quick_C.inst.cfg b/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_quick_C.inst.cfg
new file mode 100644
index 0000000000..758b696145
--- /dev/null
+++ b/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_quick_C.inst.cfg
@@ -0,0 +1,31 @@
+[general]
+version = 4
+name = Quick
+definition = deltacomb_base
+
+[metadata]
+setting_version = 17
+type = intent
+quality_type = D020
+intent_category = quick
+material = generic_petg
+variant = DBE 0.40mm
+
+[values]
+speed_print = 75
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 2
+fill_perimeter_gaps = nowhere
+infill_sparse_density = 15
+infill_line_width = =line_width
+jerk_print = 30
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+line_width = =machine_nozzle_size
+wall_line_width_x = =line_width
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_quick_D.inst.cfg b/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_quick_D.inst.cfg
index 79ffe15b1f..758b696145 100644
--- a/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_quick_D.inst.cfg
+++ b/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_quick_D.inst.cfg
@@ -12,10 +12,10 @@ material = generic_petg
 variant = DBE 0.40mm
 
 [values]
+speed_print = 75
 speed_infill = =speed_print
 speed_topbottom = =speed_print
 speed_wall = =speed_print
-speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
 wall_thickness = =line_width * 2
@@ -23,11 +23,9 @@ fill_perimeter_gaps = nowhere
 infill_sparse_density = 15
 infill_line_width = =line_width
 jerk_print = 30
-jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
 jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 line_width = =machine_nozzle_size
 wall_line_width_x = =line_width
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_quick_E.inst.cfg b/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_quick_E.inst.cfg
index 9b4163731f..dcc7d6b096 100644
--- a/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_quick_E.inst.cfg
+++ b/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_quick_E.inst.cfg
@@ -12,10 +12,10 @@ material = generic_petg
 variant = DBE 0.40mm
 
 [values]
+speed_print = 75
 speed_infill = =speed_print
 speed_topbottom = =speed_print
 speed_wall = =speed_print
-speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
 wall_thickness = =line_width * 2
@@ -23,11 +23,9 @@ fill_perimeter_gaps = nowhere
 infill_sparse_density = 15
 infill_line_width = =line_width
 jerk_print = 30
-jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
 jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 line_width = =machine_nozzle_size
 wall_line_width_x = =line_width
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_accurate_B.inst.cfg b/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_accurate_B.inst.cfg
index f7afcab509..ac7f1aaec8 100644
--- a/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_accurate_B.inst.cfg
+++ b/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_accurate_B.inst.cfg
@@ -15,7 +15,6 @@ variant = FBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2
diff --git a/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_accurate_C.inst.cfg b/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_accurate_C.inst.cfg
index ff7a586109..c53272c20b 100644
--- a/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_accurate_C.inst.cfg
+++ b/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_accurate_C.inst.cfg
@@ -15,7 +15,6 @@ variant = FBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2
diff --git a/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_accurate_D.inst.cfg b/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_accurate_D.inst.cfg
index a35eb918fa..d6724f859c 100644
--- a/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_accurate_D.inst.cfg
+++ b/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_accurate_D.inst.cfg
@@ -15,7 +15,6 @@ variant = FBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2
diff --git a/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_quick_C.inst.cfg b/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_quick_C.inst.cfg
new file mode 100644
index 0000000000..a2ac0d2621
--- /dev/null
+++ b/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_quick_C.inst.cfg
@@ -0,0 +1,31 @@
+[general]
+version = 4
+name = Quick
+definition = deltacomb_base
+
+[metadata]
+setting_version = 17
+type = intent
+quality_type = D015
+intent_category = quick
+material = generic_petg
+variant = FBE 0.40mm
+
+[values]
+speed_print = 75
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 2
+fill_perimeter_gaps = nowhere
+infill_sparse_density = 15
+infill_line_width = =line_width
+jerk_print = 30
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+line_width = =machine_nozzle_size
+wall_line_width_x = =line_width
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_quick_D.inst.cfg b/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_quick_D.inst.cfg
index 89c4c821d9..ee2a863771 100644
--- a/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_quick_D.inst.cfg
+++ b/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_quick_D.inst.cfg
@@ -12,10 +12,10 @@ material = generic_petg
 variant = FBE 0.40mm
 
 [values]
+speed_print = 75
 speed_infill = =speed_print
 speed_topbottom = =speed_print
 speed_wall = =speed_print
-speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
 wall_thickness = =line_width * 2
@@ -23,11 +23,9 @@ fill_perimeter_gaps = nowhere
 infill_sparse_density = 15
 infill_line_width = =line_width
 jerk_print = 30
-jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
 jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 line_width = =machine_nozzle_size
 wall_line_width_x = =line_width
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_quick_E.inst.cfg b/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_quick_E.inst.cfg
index a345537935..5ac617a6e9 100644
--- a/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_quick_E.inst.cfg
+++ b/resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_quick_E.inst.cfg
@@ -12,10 +12,10 @@ material = generic_petg
 variant = FBE 0.40mm
 
 [values]
+speed_print = 75
 speed_infill = =speed_print
 speed_topbottom = =speed_print
 speed_wall = =speed_print
-speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
 wall_thickness = =line_width * 2
@@ -23,11 +23,9 @@ fill_perimeter_gaps = nowhere
 infill_sparse_density = 15
 infill_line_width = =line_width
 jerk_print = 30
-jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
 jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 line_width = =machine_nozzle_size
 wall_line_width_x = =line_width
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_accurate_B.inst.cfg b/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_accurate_B.inst.cfg
index ce6f65e5ed..9e36ee7056 100644
--- a/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_accurate_B.inst.cfg
+++ b/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_accurate_B.inst.cfg
@@ -15,7 +15,6 @@ variant = DBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2
diff --git a/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_accurate_C.inst.cfg b/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_accurate_C.inst.cfg
index 611162fe80..b7005254b9 100644
--- a/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_accurate_C.inst.cfg
+++ b/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_accurate_C.inst.cfg
@@ -15,7 +15,6 @@ variant = DBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2
diff --git a/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_accurate_D.inst.cfg b/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_accurate_D.inst.cfg
index 5a971e61e1..d2810ec7cf 100644
--- a/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_accurate_D.inst.cfg
+++ b/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_accurate_D.inst.cfg
@@ -15,7 +15,6 @@ variant = DBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2
diff --git a/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_quick_D.inst.cfg b/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_quick_D.inst.cfg
index 6829977b8f..85b1e530e8 100644
--- a/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_quick_D.inst.cfg
+++ b/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_quick_D.inst.cfg
@@ -23,11 +23,9 @@ fill_perimeter_gaps = nowhere
 infill_sparse_density = 15
 infill_line_width = =line_width
 jerk_print = 30
-jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
 jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 line_width = =machine_nozzle_size
 wall_line_width_x = =line_width
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_quick_E.inst.cfg b/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_quick_E.inst.cfg
index 77223b1172..ed19c7b54c 100644
--- a/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_quick_E.inst.cfg
+++ b/resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_quick_E.inst.cfg
@@ -23,11 +23,9 @@ fill_perimeter_gaps = nowhere
 infill_sparse_density = 15
 infill_line_width = =line_width
 jerk_print = 30
-jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
 jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 line_width = =machine_nozzle_size
 wall_line_width_x = =line_width
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_accurate_B.inst.cfg b/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_accurate_B.inst.cfg
index 2fd13cdd98..2268807503 100644
--- a/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_accurate_B.inst.cfg
+++ b/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_accurate_B.inst.cfg
@@ -15,7 +15,6 @@ variant = FBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2
diff --git a/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_accurate_C.inst.cfg b/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_accurate_C.inst.cfg
index cfb0c78c34..122a0a860a 100644
--- a/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_accurate_C.inst.cfg
+++ b/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_accurate_C.inst.cfg
@@ -15,7 +15,6 @@ variant = FBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2
diff --git a/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_accurate_D.inst.cfg b/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_accurate_D.inst.cfg
index e7aee4f97f..4c6ce96f1e 100644
--- a/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_accurate_D.inst.cfg
+++ b/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_accurate_D.inst.cfg
@@ -15,7 +15,6 @@ variant = FBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2
diff --git a/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_quick_D.inst.cfg b/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_quick_D.inst.cfg
index 3ac5094c2a..ff0df08e4d 100644
--- a/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_quick_D.inst.cfg
+++ b/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_quick_D.inst.cfg
@@ -23,11 +23,9 @@ fill_perimeter_gaps = nowhere
 infill_sparse_density = 15
 infill_line_width = =line_width
 jerk_print = 30
-jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
 jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 line_width = =machine_nozzle_size
 wall_line_width_x = =line_width
\ No newline at end of file
diff --git a/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_quick_E.inst.cfg b/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_quick_E.inst.cfg
index e3d392e787..6f2eda9434 100644
--- a/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_quick_E.inst.cfg
+++ b/resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_quick_E.inst.cfg
@@ -23,11 +23,9 @@ fill_perimeter_gaps = nowhere
 infill_sparse_density = 15
 infill_line_width = =line_width
 jerk_print = 30
-jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
 jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 line_width = =machine_nozzle_size
 wall_line_width_x = =line_width
\ No newline at end of file