Commit actual files instead of my symlinks

I've been having this profile added via a symlink so that it would update itself. I didn't know that symlinks were possible in Git.

Contributes to issue CURA-6742.

1 files changed, 37 insertions, 0 deletions

diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg
new file mode 100644
index 0000000000..64a8dfe7cf
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg
@@ -0,0 +1,37 @@
+[general]
+version = 4
+name = Extra Fine
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 9
+type = quality
+quality_type = high
+weight = 1
+material = generic_nylon
+variant = AA 0.4
+
+[values]
+adhesion_type = brim
+cool_min_layer_time_fan_speed_max = 20
+cool_min_speed = 15
+infill_line_width = =round(line_width * 0.5 / 0.4, 2)
+line_width = =machine_nozzle_size
+material_initial_print_temperature = =material_print_temperature - 5
+material_final_print_temperature = =material_print_temperature - 10
+material_standby_temperature = 100
+ooze_shield_angle = 40
+raft_acceleration = =acceleration_layer_0
+raft_airgap = =round(layer_height_0 * 0.85, 2)
+raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
+raft_jerk = =jerk_layer_0
+raft_margin = 10
+raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
+skin_overlap = 50
+speed_layer_0 = =math.ceil(speed_print * 20 / 70)
+switch_extruder_prime_speed = 30
+switch_extruder_retraction_amount = 30
+switch_extruder_retraction_speeds = 40
+wall_line_width_x = =wall_line_width
+
+jerk_travel = 50